OpenPKG Specs: openpkg/lsync@78e7deb1d6ab (annotated)

openpkg/lsync@78e7deb1d6ab (annotated)

openpkg/lsync

Wed, 14 Jan 2009 15:59:12 +0100

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Wed, 14 Jan 2009 15:59:12 +0100
changeset 86: 78e7deb1d6ab
child 428: f880f219c566
permissions: -rw-r--r--

Correct and improve many buildconf and code logic blocks. In particular:
1. Document potential problems building with current binutils releases.
2. Document the flawed webkit and explain its temporary exclusion.
3. Document the edition of Qt which is built and installed.
4. Remove the Solaris x11_supdir logic as it is no longer found.
5. Correct several .pr[io] files including QMAKE_CXXFLAGS and INCPATH,
which previously caused preexisting Qt installations to deliver
erroneous old include and library logic instead of relying on
that of the currently building package. -I/opkg/include is now
placed at the end of the compile statements.
6. Don't trust the QMAKE_[INC|LIB]DIR_X11 identifiers in qmake.conf.
7. Allow more 64-bit builds and more properly identify the platform.
8. Place plugins (which are shared objects) in lib instead of share.
9. Build components as plugins when possible if with_shared is enabled.
10. Translate German text to English to be more consistent.
11. Instead of removing the pkgconfig directory of with_shared builds,
place it in a child directory useful for shared building.
12. Document the nonstandard shared build directory structure,
including using the hidden pkgconfig directory (PKG_CONFIG_PATH.)
13. Change %doc to specify files rather than directories in the RPM DB.

 #!@l_prefix@/lib/openpkg/bash
 ##
 ##  lsync -- Access Layer Synchronization Tool
 ##  Copyright (c) 2000-2007 OpenPKG Foundation e.V. <http://openpkg.net/>
 ##  Copyright (c) 2000-2007 Ralf S. Engelschall <http://engelschall.com/>
 ##
 ##  Permission to use, copy, modify, and distribute this software for
 ##  any purpose with or without fee is hereby granted, provided that
 ##  the above copyright notice and this permission notice appear in all
 ##  copies.
 ##
 ##  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
 ##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 ##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 ##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
 ##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 ##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 ##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 ##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 ##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 ##  SUCH DAMAGE.
 ##
 ##
 ##  filesystem hierarchy configuration
 ##
 #   program name and version/date
 progname="lsync"
 progvers="1.0.4"
 progdate="04-Aug-2001"
 #   root directory
 #   (if empty, .lsyncrc files provide default)
 root=""
 #   subdirectory where packages are physically installed
 pkgdir="PKG"
 #   subdirectories which are synchronized between physically
 #   installed package areas and access layer
 subdirs="bin,sbin,man,info,include,lib"
 ##
 ##  command line option parsing
 ##
 #   default run-time modes
 nop=0
 quiet=0
 trace=0
 help=''
 init=0
 uninstall=0
 local=0
 #   be aware of .lsyncrc files
 cwd=`pwd`
 while [ 1 ]; do
     if [ -f "$cwd/.lsyncrc" ]; then
         set -- `cat $cwd/.lsyncrc` "$@"
     fi
     [ ".$cwd" = ./ ] && break
     cwd=`echo $cwd | sed -e 's;/[^/]*$;;' -e 's;^$;/;'`
 done
 if [ ".$HOME" != . -a -f "$HOME/.lsyncrc" ]; then
     set -- `cat $HOME/.lsyncrc` "$@"
 fi
 #   iterate over argument line
 for opt
 do
     case $opt in
         -*=*) arg=`echo "$opt" | sed 's/^[-_a-zA-Z0-9]*=//'` ;;
            *) arg='' ;;
     esac
     case $opt in
         -n|--nop       ) nop=1         ;;
         -q|--quiet     ) quiet=1       ;;
         -t|--trace     ) trace=1       ;;
         -v|--version   ) version=1     ;;
         -h|--help      ) help="Usage"  ;;
         -i|--init      ) init=1        ;;
         -u|--uninstall ) uninstall=1   ;;
         -l|--local     ) local=1       ;;
         --root=*       ) root=$arg     ;;
         --pkgdir=*     ) pkgdir=$arg   ;;
         --subdirs=*    ) subdirs=$arg  ;;
         *              ) help="Invalid option \`$opt'"; break ;;
     esac
 done
 #   error or usage message
 if [ ".$help" != . ]; then
     if [ ".$help" != ".Usage" ]; then
         echo "$progname:ERROR: $help" 1>&2
     fi
     cat 1>&2 <<EOT
 Usage: $progname [options]
 Global options:
   --version,   -v   display tool version information
   --help,      -h   display usage information
   --init,      -i   create an initial directory hierarchy
 Run-time options:
   --nop,       -n   perform no filesystem operations
   --quiet,     -q   display no verbose messages
   --trace,     -t   display performed filesystem operations
   --local,     -l   process a local package area only
   --uninstall, -u   uninstall all files
 Filesystem options:
   --root=DIR        override root directory
   --pkgdir=DIR      override package sub-directory
   --subdirs=DIR     override synchronized sub-directories
 Current configuration:
   root directory:       $root
   package root subdir:  $pkgdir
   synchronized subdirs: $subdirs
 EOT
     if [ ".$help" != ".Usage" ]; then
         exit 2
     else
         exit 0
     fi
 fi
 #   version information
 if [ ".$version" = .1 ]; then
     echo "$progname $progvers ($progdate)"
     exit 0
 fi
 #   make sure a root directory was found or specified
 if [ ".$root" = . ]; then
     echo "$progname:ERROR: no root directory specified!" 1>&2
     echo "$progname:HINT: use --root=DIR option explicitly on command line" 1>&2
     echo "$progname:HINT: or implicitly inside an .lsyncrc file in your home" 1>&2
     echo "$progname:HINT: directory or in any parent directory." 1>&2
     exit 3
 fi
 ##
 ##  helper functions
 ##
 display_hd () {
     if [ ".$headline" != . ]; then
         if [ ".$quiet" = .0 ]; then
             echo "$headline"
         fi
         headline=''
     fi
 }
 display_op () {
     if [ ".$quiet" = .0 ]; then
         echo "  $@"
     fi
 }
 display_warning () {
     echo "$progname:WARNING: $*" 1>&2
 }
 display_error () {
     echo "$progname:ERROR: $*" 1>&2
 }
 perform_op () {
     if [ ".$trace" = .1 ]; then
         echo "  \$ $@"
     fi
     if [ ".$nop" = .0 ]; then
         eval "$@"
     fi
 }
 ##
 ##  main processing
 ##
 #   extend a "man" subdir to a complete list with subdirs
 #   in order to avoid special cases in the loop processing
 manex=''
 if [ ".$init" = .1 ]; then
     manex='man'
 fi
 for i in 1 2 3 4 5 6 7 8; do
     manex="$manex,man/man$i"
 done
 manex=`echo $manex | sed -e 's;^,;;'`
 subdirs=`echo $subdirs | sed -e "s;man;$manex;"`
 #   special processing: create initial hierarchy
 if [ ".$init" = .1 ]; then
     if [ ! -d $root ]; then
         echo "creating $root"
         perform_op "mkdir $root" || exit 1
     fi
     for subdir in $pkgdir `IFS=,; echo $subdirs`; do
         if [ ! -d "$root/$subdir" ]; then
             echo "creating $root/$subdir"
             perform_op "mkdir $root/$subdir" || exit 1
         fi
     done
     exit 0
 fi
 #   make sure the root directory actually exists
 if [ ! -d "$root" ]; then
     display_warning "root directory \`$root' does not exist"
     exit 3
 fi
 #   if processing is restricted to a local package area, pre-determine its name
 if [ ".$local" = .1 ]; then
    realroot=`cd $root; pwd`
    realthis=`pwd`
    pkgname=`expr "$realthis" : "^$realroot/$pkgdir/\\([^/]*\\).*"`
    if [ ".$pkgname" = . ]; then
        display_error "you are not staying under a local package sub-directory"
        exit 3
    fi
 fi
 #   now perform the synchronization for each sub-directory...
 for subdir in `IFS=,; echo $subdirs`; do
     headline="$root/$subdir:"
     #   make sure the subdir actually exists in the access layer
     if [ ! -d "$root/$subdir" ]; then
         display_warning "access layer directory \`$root/$subdir' does not exist"
         continue
     fi
     #
     #   PASS 1: remove dangling symbolic links in access layer
     #
     #   iterate over all symlinks in the access layer subdir
     for link in . `ls "$root/$subdir/" | sed -e "s;^$root/$subdir/*;;g"`; do
         test ".$link" = ".." && continue
         #   determine the target file of the symlink
         target=`ls -l "$root/$subdir/$link" 2>/dev/null | sed -e 's;.*-> *;;'`
         if [ ".$target" = . ]; then
             display_warning "$root/$subdir/$link seems to be not a symbolic link"
             continue
         fi
         #   (optionally) make sure that link target points into local package area
         if [ ".$local" = .1 -a .`expr $target : "../$pkgdir/$pkgname/.*"` = .0 ]; then
             continue
         fi
         #   check whether link is valid, i.e., points to
         #   an existing target file or directory
         if [ ".$uninstall" = .1 ] ||\
            [ ! -f "$root/$subdir/$target" -a \
              ! -d "$root/$subdir/$target"      ]; then
             #   target no longer exists, so remove dangling symlink
             display_hd
             display_op "remove: $link -> $target"
             perform_op "rm -f $root/$subdir/$link"
         fi
     done
     #   if we are uninstalling only, our work is now done
     if [ ".$uninstall" = ".1" ]; then
         continue
     fi
     #
     #   PASS 2: create new symbolic links in access layer
     #
     #   calculate the corresponding reverse directory for the current subdir
     revdir=`echo $subdir | sed -e 's;[^/][^/]*;..;g'`
     #   iterate over all package directories
     for dir in . `ls "$root/$pkgdir/" | sed -e "s;^$root/$pkgdir/*;;g"`; do
         test ".$dir" = ".." && continue
         #   (optionally) make sure that we operate only for the local package area
         if [ ".$local" = .1 -a ".$dir" != ".$pkgname" ]; then
             continue
         fi
         #   skip all directories with appended version numbers
         #   in order to support manual versioning of packages
         case $dir in
             *-[0-9]* ) continue ;;
         esac
         #   skip if package directory or package sub-directories has sticky bit set
         if [ ".`ls -l -d $root/$pkgdir/$dir 2>/dev/null | cut -c10`" = .t ] ||\
            [ ".`ls -l -d $root/$pkgdir/$dir/$subdir 2>/dev/null | cut -c10`" = .t ]; then
             continue
         fi
         #   check whether the processed subdir exists in package area
         if [ -d "$root/$pkgdir/$dir/$subdir" ]; then
             #   iterate over all files/directories in package's subdir
             for file in . `ls "$root/$pkgdir/$dir/$subdir/" |\
                            sed -e "s;^$root/$pkgdir/$dir/$subdir/*;;g"`; do
                 test ".$file" = ".." && continue
                 #   calculate the access layer symlink target
                 target="$revdir/$pkgdir/$dir/$subdir/$file"
                 #   check whether a possibly conflicting symlink exists
                 exlink=`ls -l $root/$subdir/$file 2>/dev/null`
                 if [ ".$exlink" != . ]; then
                     extarget=`echo $exlink | sed -e 's;.*-> *;;'`
                     if [ ".$extarget" = . ]; then
                         display_warning "$root/$subdir/$file exits, but seems to be not a symbolic link"
                     elif [ ".$extarget" != ".$target" ]; then
                         display_hd
                         display_op "conflict: $file -> $extarget [existing]"
                         display_op "          $file -> $target [alternative]"
                     fi
                     continue
                 fi
                 #   create new symlink in access layer
                 display_hd
                 display_op "create: $file -> $target"
                 perform_op "cd $root/$subdir && ln -s $target $file"
             done
         fi
     done
 done

OpenPKG Specs / annotate

openpkg/lsync@78e7deb1d6ab (annotated)

openpkg/lsync