OpenPKG Specs: clamav/clamav.spec@870131689a5c (annotated)

clamav/clamav.spec@870131689a5c (annotated)

clamav/clamav.spec

Sat, 21 May 2011 22:05:42 +0200

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Sat, 21 May 2011 22:05:42 +0200
changeset 340: 870131689a5c
parent 233: f5f6e93f3dc6
child 393: 9bafbc9da865
permissions: -rw-r--r--

Correct diverse buildconf of upstream release and reconcile packaging somewhat.
These changes stem from the obvious changes in the latest vendor release, but
from discussions with trolls Daniel and Oswald as well regarding build config.

This commital follows conclusion of buildconf adjustments to allow the new
vendor version to build on Linux AMD64, but is incomplete as many packaging
comments show. The next series of changes focus on Solaris IA32 and reduction
of buildconf adjustments testing old problems comprehensively in anticipation
of discussion at the upcoming Nokia Contributor Summit in Berlin.

 ##
 ##  clamav.spec -- OpenPKG RPM Package Specification
 ##  Copyright (c) 2000-2009 OpenPKG Foundation e.V. <http://openpkg.net/>
 ##
 ##  Permission to use, copy, modify, and distribute this software for
 ##  any purpose with or without fee is hereby granted, provided that
 ##  the above copyright notice and this permission notice appear in all
 ##  copies.
 ##
 ##  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
 ##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 ##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 ##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
 ##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 ##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 ##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 ##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 ##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 ##  SUCH DAMAGE.
 ##
 #   package information
 Name:         clamav
 Summary:      Clam Antivirus
 URL:          http://www.clamav.net/
 Vendor:       Tomasz Kojm
 Packager:     OpenPKG Foundation e.V.
 Distribution: OpenPKG Community
 Class:        EVAL
 Group:        AntiVirus
 License:      GPL
 Version:      0.95.3
 Release:      20091102
 #   package options
 %option       with_milter  no
 #   list of sources
 Source0:      http://switch.dl.sourceforge.net/clamav/clamav-%{version}.tar.gz
 Source1:      rc.clamav
 Patch0:       clamav.patch
 #   build information
 Prefix:       %{l_prefix}
 BuildRoot:    %{l_buildroot}
 BuildPreReq:  OpenPKG, openpkg >= 20060823, gcc, bzip2, pkgconfig, bc
 PreReq:       OpenPKG, openpkg >= 20060823
 BuildPreReq:  zlib, bzip2, curl, gmp, libiconv, openssl
 PreReq:       zlib, bzip2, curl, gmp, libiconv, openssl
 %if "%{with_milter}" == "yes"
 BuildPreReq:  milter
 PreReq:       milter
 %endif
 AutoReq:      no
 AutoReqProv:  no
 %description
     Clam AntiVirus is an anti-virus toolkit for UNIX. The main
     purpose of this software is the integration with mail servers
     (attachment scanning). The package provides a flexible and scalable
     multi-threaded daemon, a command line scanner, and a tool for
     automatic updating via Internet. The programs are based on a shared
     library distributed with the Clam AntiVirus package, which you can
     use with your own software. The virus database is based on the virus
     database from OpenAntiVirus, but contains additional signatures.
 %track
     prog clamav = {
         version   = %{version}
         url       = http://sourceforge.net/projects/clamav/files/
         regex     = clamav-(\d+\.\d+(\.\d+)*)\.tar\.gz
     }
 %prep
     %setup -q
     %patch -p0
 %build
     #   configure package
     CC="%{l_cc}" \
     CFLAGS="%{l_cflags -O}" \
     CPPFLAGS="%{l_cppflags}" \
     LDFLAGS="%{l_ldflags}" \
     GREP="grep" \
     ./configure \
         --prefix=%{l_prefix} \
         --mandir=%{l_prefix}/man \
         --sysconfdir=%{l_prefix}/etc/clamav \
         --with-zlib=%{l_prefix} \
         --with-libcurl \
         --with-user=%{l_rusr} \
         --with-group=%{l_rgrp} \
         --without-tcpwrappers \
         --disable-clamav \
         --disable-clamuko \
         --disable-urandom \
         --disable-cr \
 %if "%{with_milter}" == "yes"
         --enable-milter \
         --with-sendmail=/dev/null \
 %else
         --disable-milter \
 %endif
         --disable-unrar \
         --disable-shared
     #   build package
     %{l_make} %{l_mflags -O}
 %install
     rm -rf $RPM_BUILD_ROOT
     #   perform standard package installation
     %{l_make} %{l_mflags} install AM_MAKEFLAGS="DESTDIR=$RPM_BUILD_ROOT"
     #   install default configuration
     %{l_shtool} mkdir -f -p -m 755 \
         $RPM_BUILD_ROOT%{l_prefix}/etc/clamav
     %{l_shtool} install -c -m 644 \
         -e 's;^\(Example\);#\1;' \
         -e 's;^#\(LogFile\) /.*;\1 %{l_prefix}/var/clamav/clamd.log;' \
         -e 's;^#\(LogTime.*\);\1;' \
         -e 's;^#\(PidFile\).*;\1 %{l_prefix}/var/clamav/clamd.pid;' \
         -e 's;^\(LocalSocket\).*;\1 %{l_prefix}/var/clamav/clamd.sock;' \
         -e 's;^#\(FixStaleSocket.*\);\1;' \
         -e 's;^#\(DatabaseDirectory\).*;\1 %{l_prefix}/share/clamav;' \
         -e 's;^#\(User\).*;\1 %{l_rusr};' \
         etc/clamd.conf \
         $RPM_BUILD_ROOT%{l_prefix}/etc/clamav/
     %{l_shtool} install -c -m 644 \
         -e 's;^\(Example\);#\1;' \
         -e 's;^#\(DatabaseDirectory\).*;\1 %{l_prefix}/share/clamav;' \
         -e 's;^#\(UpdateLogFile\).*;\1 %{l_prefix}/var/clamav/freshclam.log;' \
         -e 's;^#\(NotifyClamd\).*;\1 %{l_prefix}/etc/clamav/clamd.conf;' \
         etc/freshclam.conf \
         $RPM_BUILD_ROOT%{l_prefix}/etc/clamav/
     #   install run-command script
     %{l_shtool} mkdir -f -p -m 755 \
         $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
     %{l_shtool} install -c -m 755 %{l_value -s -a} \
         %{SOURCE rc.clamav} $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/
     #   strip-down installation hierarchy
     strip $RPM_BUILD_ROOT%{l_prefix}/bin/*  >/dev/null 2>&1 || true
     strip $RPM_BUILD_ROOT%{l_prefix}/sbin/* >/dev/null 2>&1 || true
 %if "%{with_milter}" == "no"
     rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man8/clamav-milter.8
 %endif
     #   create additional installation directory
     %{l_shtool} mkdir -f -p -m 755 \
         $RPM_BUILD_ROOT%{l_prefix}/var/clamav
     #   determine installation files
     %{l_rpmtool} files -v -ofiles -r$RPM_BUILD_ROOT \
         %{l_files_std} \
         '%config %{l_prefix}/etc/clamav/*.conf' \
         '%attr(755,%{l_rusr},%{l_mgrp}) %{l_prefix}/var/clamav' \
         '%attr(755,%{l_rusr},%{l_rgrp}) %{l_prefix}/share/clamav'
 %files -f files
 %clean
     rm -rf $RPM_BUILD_ROOT
 %pre
     #   before upgrade, save status and stop service
     [ $1 -eq 2 ] || exit 0
     eval `%{l_rc} clamav status 2>/dev/null | tee %{l_tmpfile}`
     %{l_rc} clamav stop 2>/dev/null
     exit 0
 %post
     if [ $1 -eq 2 ]; then
         #   after upgrade, restore status
         eval `cat %{l_tmpfile}`; rm -f %{l_tmpfile}
         [ ".$clamav_active" = .yes ] && %{l_rc} clamav start
     fi
     exit 0
 %preun
     #   before erase, stop service and remove log files
     [ $1 -eq 0 ] || exit 0
     %{l_rc} clamav stop 2>/dev/null
     rm -f $RPM_INSTALL_PREFIX/var/clamav/*.log* >/dev/null 2>&1 || true
     exit 0

OpenPKG Specs / annotate

clamav/clamav.spec@870131689a5c (annotated)

clamav/clamav.spec