OpenPKG Specs: openpkg/openpkg.spec@a2c6460cfb16 (annotated)

openpkg/openpkg.spec@a2c6460cfb16 (annotated)

openpkg/openpkg.spec

Mon, 28 Jan 2013 17:37:18 +0100

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Mon, 28 Jan 2013 17:37:18 +0100
changeset 758: a2c6460cfb16
parent 570: d7167d2b16f4
permissions: -rw-r--r--

Correct socket error reporting improvement with IPv6 portable code,
after helpful recommendation by Saúl Ibarra Corretgé on OSips devlist.

 ##
 ##  openpkg.spec -- OpenPKG RPM Package Specification
 ##  Copyright (c) 2000-2012 OpenPKG GmbH <http://openpkg.com/>
 ##
 ##  This software is property of the OpenPKG GmbH, DE MUC HRB 160208.
 ##  All rights reserved. Licenses which grant limited permission to use,
 ##  copy, modify and distribute this software are available from the
 ##  OpenPKG GmbH.
 ##
 ##  THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED
 ##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 ##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 ##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
 ##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 ##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 ##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 ##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 ##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 ##  SUCH DAMAGE.
 ##
 #   NOTICE: This OpenPKG RPM specification is _very_ special, because
 #   it is used both for bootstrapping OpenPKG with its OpenPKG RPM and
 #   for regular builds of OpenPKG RPM in order to upgrade an existing
 #   installation. For this it has to interact correctly with the
 #   "openpkg.boot" script. See the documentation in the file "README"
 #   and the source of the companion script "openpkg.boot" for details,
 #   but do not touch anything here until you are 100% sure about what
 #   you are doing. In short: This script is allowed to use only a very
 #   restricted subset of the OpenPKG RPM functionality!
 #   BUILD REQUIREMENTS:
 #   o any sh(1)
 #   o any tar(1)
 #   o any make(1)
 #   o any cc(1)
 #   the used software versions
 %define       V_rpm_major   5.1
 %define       V_rpm_minor   9
 %define       V_popt        1.16
 %define       V_lua         5.1.4
 %define       V_sqlite      3.6.17
 %define       V_zlib        1.2.7
 %define       V_bzip2       1.0.6
 %define       V_beecrypt    4.2.1
 %define       V_curl        7.26.0
 %define       V_pcre        8.31
 %define       V_make        3.82
 %define       V_gzip        1.5
 %define       V_patch       2.6.1
 %define       V_tar         1.26
 %define       V_bash        4.2
 %define       V_bash_pl     29
 %define       V_uuid        1.6.2
 %define       V_config      20120627
 %define       V_perl        5.16.0
 %define       V_openssl     1.0.1c
 %define       V_xz          5.0.4
 %define       V_shtool      2.0.8
 %define       V_libarchive  3.0.3
 %define       V_diffutils   3.2
 %define       V_svs         1.1.0
 #   package information
 Name:         openpkg
 Summary:      OpenPKG Framework
 URL:          http://openpkg.org/
 Vendor:       OpenPKG GmbH
 Packager:     OpenPKG GmbH
 Distribution: OpenPKG
 Class:        BOOT
 Group:        Bootstrapping
 License:      Proprietary, Open Source
 Version:      4.6.7
 Release:      20120800
 #   list of pristine upstream sources
 Source0:      ftp://ftp.gnu.org/gnu/patch/patch-%{V_patch}.tar.gz
 Source1:      ftp://ftp.cwru.edu/pub/bash/bash-%{V_bash}.tar.gz
 Source2:      ftp://ftp.gnu.org/gnu/make/make-%{V_make}.tar.gz
 Source3:      ftp://ftp.gnu.org/gnu/tar/tar-%{V_tar}.tar.gz
 Source4:      http://download.openpkg.org/components/versioned/config/config-%{V_config}.tar.gz
 Source5:      http://download.openpkg.org/components/derived/gzip/gzip-%{V_gzip}.tar
 Source6:      http://download.openpkg.org/components/derived/perl/perl-%{V_perl}-mini.tar.gz
 Source7:      http://rpm5.org/files/rpm/rpm-%{V_rpm_major}/rpm-%{V_rpm_major}.%{V_rpm_minor}.tar.gz
 Source8:      ftp://ftp.openssl.org/source/openssl-%{V_openssl}.tar.gz
 Source9:      ftp://ftp.ossp.org/pkg/lib/uuid/uuid-%{V_uuid}.tar.gz
 Source10:     http://curl.haxx.se/download/curl-%{V_curl}.tar.gz
 Source11:     http://switch.dl.sourceforge.net/beecrypt/beecrypt-%{V_beecrypt}.tar.gz
 Source12:     http://www.bzip.org/%{V_bzip2}/bzip2-%{V_bzip2}.tar.gz
 Source13:     http://www.zlib.net/zlib-%{V_zlib}.tar.gz
 Source14:     http://rpm5.org/files/popt/popt-%{V_popt}.tar.gz
 Source15:     http://www.sqlite.org/sqlite-%{V_sqlite}.tar.gz
 Source16:     ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-%{V_pcre}.tar.gz
 Source17:     http://libarchive.googlecode.com/files/libarchive-%{V_libarchive}.tar.gz
 Source18:     ftp://ftp.gnu.org/gnu/diffutils/diffutils-%{V_diffutils}.tar.gz
 Source19:     ftp://ftp.ossp.org/pkg/tool/svs/svs-%{V_svs}.tar.gz
 Source20:     http://tukaani.org/xz/xz-%{V_xz}.tar.gz
 #   list of local patches against pristine upstream sources
 Source100:    bash.patch
 Source101:    bash.patch.vendor
 Source102:    beecrypt.patch
 Source103:    make.patch
 Source104:    openssl.patch
 Source105:    perl.patch
 Source106:    tar.patch
 Source107:    rpm.patch
 Source108:    popt.patch
 Source109:    sqlite.patch
 Source110:    curl.patch
 Source111:    pcre.patch
 Source112:    diffutils.patch
 Source113:    libarchive.patch
 Source114:    patch.strnlen.c
 Source115:    patch.Makefile.in
 Source116:    xz.patch
 Source117:    zlib.patch
 #   list of local sources
 Source200:    README
 Source201:    etc.prereq.sh
 Source202:    etc.usrgrp.sh
 Source203:    etc.wrapbin.sh
 Source204:    etc.wrapsrc.sh
 Source205:    dot.bash_login
 Source206:    dot.bashrc
 Source207:    dot.lsyncrc
 Source208:    local.README
 Source209:    lsync
 Source210:    lsync.8
 Source211:    lsync.pod
 Source212:    man.sh
 Source213:    openpkg.1
 Source214:    openpkg.boot
 Source215:    openpkg.com.pgp
 Source216:    openpkg.net.pgp
 Source217:    openpkg.org.pgp
 Source218:    openpkg.pod
 Source219:    openpkg.sh
 Source220:    rc
 Source221:    rc.8
 Source222:    rc.conf
 Source223:    rc.func
 Source224:    rc.openpkg
 Source225:    rc.pod
 Source226:    release.8
 Source227:    release.pod
 Source228:    release.sh
 Source229:    root.README
 Source230:    rpm-config.8
 Source231:    rpm-config.pod
 Source232:    rpm-config.sh
 Source233:    rpmdb
 Source234:    rpmtool
 Source235:    rpmtool.8
 Source236:    rpmtool.pod
 Source237:    shtool
 Source238:    shtool.sh
 Source239:    uuid.8
 Source240:    uuid.pod
 Source241:    uuid.sh
 Source242:    rpmmacros
 Source243:    rpmpopt
 Source244:    curl.sh
 Source245:    index.pl
 Source246:    index.8
 Source247:    index.pod
 Source248:    build.pl
 Source249:    build.8
 Source250:    build.pod
 Source251:    makeproxy.pl
 Source252:    makeproxy.8
 Source253:    lint-fsl.pl
 Source254:    lint-rc.pl
 Source255:    lint-rpm.pl
 Source256:    lint-spec.pl
 Source257:    dev.pl
 Source258:    dev.8
 Source259:    dev.pod
 Source260:    openpkg.mk
 Source261:    openpkg.c
 Source262:    Makefile
 Source263:    mutex.c
 Source264:    mutex.mk
 Source265:    register.sh
 Source266:    register.pod
 Source267:    register.8
 Source268:    rpm.sh
 Source269:    license.lua
 Source270:    license-BOOT.txt
 Source271:    license-COMMUNITY.txt
 Source272:    license-EVAL.txt
 Source273:    license-EXAMPLE.txt
 Source274:    license-PROMO.txt
 Source275:    license-RECOVERY.txt
 Source276:    license.sh
 Source277:    license.pod
 Source278:    license.8
 Source279:    rpmlua
 Source280:    sea.sh
 Source281:    sea.pod
 Source282:    sea.8
 Source283:    stack.sh
 Source284:    stack.pod
 Source285:    stack.8
 Source286:    search.pl
 Source287:    search.pod
 Source288:    search.8
 Source289:    mirror.pl
 Source290:    mirror.pod
 Source291:    mirror.8
 #   build information
 BuildRoot:    %{l_buildroot}
 AutoReq:      no
 AutoReqProv:  no
 Provides:     %{l_prefix}
 Provides:     OpenPKG
 Provides:     openpkg = %{release}-%{release}
 %description
     This is the OpenPKG Framework, the so called "bootstrap" package
     of OpenPKG. OpenPKG is a cross platform, self contained, RPM based
     software packaging solution, targeting the flexible building of
     software stacks on Unix platforms. The RPM Package Manager (RPM)
     is the underlying, sophisticated and portable package management
     tool which drives the automated building, installation, management
     and deinstallation of all Unix software components in an OpenPKG
     software stack.
     This OpenPKG package contains the following individual
     software components (individual licenses listed in brackets):
         OpenPKG Framework  %(echo "%{version}"                    | awk '{ printf("%%-7s", $1); }') [Proprietary]
         rpm5.org RPM       %(echo "%{V_rpm_major}.%{V_rpm_minor}" | awk '{ printf("%%-7s", $1); }') [LGPL]
         rpm5.org POPT      %(echo "%{V_popt}"                     | awk '{ printf("%%-7s", $1); }') [LGPL]
         BeeCrypt           %(echo "%{V_beecrypt}"                 | awk '{ printf("%%-7s", $1); }') [LGPL]
         Lua                %(echo "%{V_lua}"                      | awk '{ printf("%%-7s", $1); }') [MIT]
         SQLite             %(echo "%{V_sqlite}"                   | awk '{ printf("%%-7s", $1); }') [Public Domain]
         PCRE               %(echo "%{V_pcre}"                     | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
         ZLib               %(echo "%{V_zlib}"                     | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
         XZ                 %(echo "%{V_xz}"                       | awk '{ printf("%%-7s", $1); }') [PD/LGPL/GPL]
         GNU Bzip2          %(echo "%{V_bzip2}"                    | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
         GNU Gzip           %(echo "%{V_gzip}"                     | awk '{ printf("%%-7s", $1); }') [GPL]
         GNU Tar            %(echo "%{V_tar}"                      | awk '{ printf("%%-7s", $1); }') [GPL]
         GNU Patch          %(echo "%{V_patch}"                    | awk '{ printf("%%-7s", $1); }') [GPL]
         GNU Shtool         %(echo "%{V_shtool}"                   | awk '{ printf("%%-7s", $1); }') [GPL]
         GNU Make           %(echo "%{V_make}"                     | awk '{ printf("%%-7s", $1); }') [GPL]
         GNU Bash           %(echo "%{V_bash}.%{V_bash_pl}"        | awk '{ printf("%%-7s", $1); }') [GPL]
         GNU DiffUtils      %(echo "%{V_diffutils}"                | awk '{ printf("%%-7s", $1); }') [GPL]
         BSD libarchive     %(echo "%{V_libarchive}"               | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
         OSSP uuid          %(echo "%{V_uuid}"                     | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
         OSSP svs           %(echo "%{V_svs}"                      | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
         cURL               %(echo "%{V_curl}"                     | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
         OpenSSL            %(echo "%{V_openssl}"                  | awk '{ printf("%%-7s", $1); }') [BSD]
         Perl               %(echo "%{V_perl}"                     | awk '{ printf("%%-7s", $1); }') [Artistic]
 %track
     prog openpkg:bash = {
         version   = %{V_bash}
         url       = ftp://ftp.cwru.edu/pub/bash/
         regex     = bash-(__VER__)\.tar\.gz
     }
     prog openpkg:bzip2 = {
         version   = %{V_bzip2}
         url       = http://www.bzip.org/downloads.html
         regex     = bzip2-(__VER__)\.tar\.gz
     }
     prog openpkg:curl = {
         version   = %{V_curl}
         url       = http://curl.haxx.se/download/
         regex     = curl-(__VER__)\.tar\.gz
     }
     prog openpkg:pcre = {
         version   = %{V_pcre}
         url       = ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/
         regex     = pcre-(__VER__)\.tar\.gz
     }
     prog openpkg:gzip = {
         version   = %{V_gzip}
         url       = ftp://ftp.gnu.org/gnu/gzip/
         regex     = gzip-(__VER__)\.tar(\.gz)?
     }
     prog openpkg:make = {
         version   = %{V_make}
         url       = ftp://ftp.gnu.org/gnu/make/
         regex     = make-(__VER__)\.tar\.gz
     }
     prog openpkg:patch = {
         version   = %{V_patch}
         url       = ftp://ftp.gnu.org/gnu/patch/
         regex     = patch-(__VER__)\.tar\.gz
     }
     prog openpkg:popt = {
         version   = %{V_popt}
         url       = http://rpm5.org/files/popt/
         regex     = popt-(\d+\.\d+)\.tar\.gz
     }
     prog openpkg:rpm = {
         version   = %{V_rpm_major}.%{V_rpm_minor}
         url       = http://rpm5.org/files/rpm/rpm-%{V_rpm_major}/
         regex     = rpm-(\d+\.\d+[.ab]\d+)\.tar\.gz
     }
     prog openpkg:tar = {
         version   = %{V_tar}
         url       = ftp://ftp.gnu.org/gnu/tar/
         regex     = tar-(__VER__)\.tar\.gz
     }
     prog openpkg:zlib = {
         version   = %{V_zlib}
         url       = http://www.zlib.net/
         regex     = zlib-(__VER__)\.tar\.gz
     }
     prog openpkg:diffutils = {
         version   = %{V_diffutils}
         url       = ftp://alpha.gnu.org/gnu/diffutils/
         regex     = diffutils-(__VER__)\.tar\.gz
     }
     prog openpkg:libarchive = {
         version   = %{V_libarchive}
         url       = http://code.google.com/p/libarchive/downloads/list
         regex     = libarchive-(__VER__)\.tar\.gz
     }
     prog openpkg:uuid = {
         version   = %{V_uuid}
         url       = ftp://ftp.ossp.org/pkg/lib/uuid/
         regex     = uuid-(__VER__)\.tar\.gz
     }
     prog openpkg:svs = {
         version   = %{V_svs}
         url       = ftp://ftp.ossp.org/pkg/tool/svs/
         regex     = svs-(__VER__)\.tar\.gz
     }
     prog openpkg:config = {
         version   = %{V_config}
         url       = http://download.openpkg.org/components/versioned/config/
         regex     = config-(__VER__)\.tar\.gz
     }
     prog openpkg:beecrypt = {
         version   = %{V_beecrypt}
         url       = http://sourceforge.net/project/showfiles.php?group_id=8924&package_id=9007
         regex     = beecrypt-(__VER__)\.tar\.gz
     }
     prog openpkg:perl = {
         version   = %{V_perl}
         url       = http://download.openpkg.org/components/derived/perl/
         regex     = perl-(__VER__)-mini\.tar\.gz
     }
     prog openpkg:openssl = {
         version   = %{V_openssl}
         url       = ftp://ftp.openssl.org/source/
         regex     = openssl-(\d+\.\d+\.\d+[a-z]?)\.tar\.gz
     }
     prog openpkg:lua = {
         version   = %{V_lua}
         url       = http://www.lua.org/download.html
         regex     = lua-(\d+\.\d+\.\d+)\.tar\.gz
     }
     prog openpkg:sqlite = {
         version   = %{V_sqlite}
         url       = http://www.sqlite.org/download.html
         regex     = sqlite-(\d+\.\d+\.\d+(?:\.\d+)?)\.tar\.gz
     }
     prog openpkg:xz = {
         version   = %{V_xz}
         url       = http://tukaani.org/xz/
         regex     = xz-(\d+\.\d+\.\d+)\.tar\.gz
     }
 %prep
     #   skip in bootstrap phase 2 (see openpkg.boot)
     [ ".$OPENPKG_BOOT" = .1 ] && exit 0
     #   switch into a temporary build area
     rm -rf openpkg-%{version}
     mkdir openpkg-%{version}
     cd openpkg-%{version}
     rm -f .buildenv
     touch .buildenv
     #   provide a bootstrap alternative to %{SOURCE xxx} because else
     #   it is not possible to upgrade a newer OpenPKG RPM with an older
     #   OpenPKG RPM.
     echo >>.buildenv 'SOURCE () {'
     echo >>.buildenv '    if [ -f "%{_specdir}/$1" ]; then'
     echo >>.buildenv '        echo "%{_specdir}/$1"'
     echo >>.buildenv '    else'
     echo >>.buildenv '        echo "%{_sourcedir}/$1"'
     echo >>.buildenv '    fi'
     echo >>.buildenv '}'
     echo >>.buildenv 'VERBOSE () {'
     echo >>.buildenv '    if [ -f "%{_specdir}/rpmtool" ]; then'
     echo >>.buildenv '        echo "$*" | sh %{_specdir}/rpmtool msg'
     echo >>.buildenv '    else'
     echo >>.buildenv '        echo "$*" | sh %{_sourcedir}/rpmtool msg'
     echo >>.buildenv '    fi'
     echo >>.buildenv '}'
     . ./.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Determine Build Tool Paths"; set -x
     #   determine path to shtool
     shtool=`SOURCE shtool`
     echo "shtool=$shtool" >>./.buildenv
     #   determine development tools
     #   - bootstrapping: %{l_xxx} is set via sed(1)
     #   - upgrading new: %{l_xxx} is set via rpmmacros
     #   - upgrading old: %{l_xxx} is not set at all
     #   manually make sure tar(1) is available
     l_tar=""; export l_tar
     [ ".%{?l_tar:set}"   = .set ] && l_tar="%{l_tar}"
     [ ".%{?use_tar:set}" = .set ] && l_tar="%{use_tar}"
     if [ ".$l_tar" = . ]; then
         l_tar=`sh $shtool path gtar tar`
         if [ ".$l_tar" = . ]; then
             echo "openpkg: prerequisite tool \`gtar' or \`tar' not found"
             exit 1
         fi
     fi
     echo "l_tar=\"$l_tar\"; export l_tar" >>.buildenv
     #   manually make sure make(1) is available
     l_make=""; export l_make
     [ ".%{?l_make:set}"   = .set ] && l_make="%{l_make}"
     [ ".%{?use_make:set}" = .set ] && l_make="%{use_make}"
     if [ ".$l_make" = . ]; then
         l_make=`sh $shtool path gmake make`
         if [ ".$l_make" = . ]; then
             echo "openpkg: prerequisite tool \`gmake' or \`make' not found"
             exit 1
         fi
     fi
     echo "l_make=\"$l_make\"; export l_make" >>.buildenv
     #   manually make sure cc(1) is available
     l_cc=""; export l_cc
     [ ".%{?l_cc:set}"   = .set ] && l_cc="%{l_cc}"
     [ ".%{?use_cc:set}" = .set ] && l_cc="%{use_cc}"
     if [ ".$l_cc" = . ]; then
         l_cc=`sh $shtool path gcc cc`
         if [ ".$l_cc" = . ]; then
             echo "openpkg: prerequisite tool \`gcc' or \`cc' not found"
             exit 1
         fi
     fi
     echo "l_cc=\"$l_cc\"; export l_cc" >>.buildenv
     #   manually make sure ar(1) is available
     l_ar=""; export l_ar
     [ ".%{?l_ar:set}"   = .set ] && l_ar="%{l_ar}"
     [ ".%{?use_ar:set}" = .set ] && l_ar="%{use_ar}"
     if [ ".$l_ar" = . ]; then
         l_ar=`sh $shtool path ar`
         if [ ".$l_ar" = . ]; then
             echo "openpkg: prerequisite tool \`ar' not found"
             exit 1
         fi
     fi
     echo "l_ar=\"$l_ar\"; export l_ar" >>.buildenv
     #   manually make sure ld(1) is available
     l_ld=""; export l_ld
     [ ".%{?l_ld:set}"   = .set ] && l_ld="%{l_ld}"
     [ ".%{?use_ld:set}" = .set ] && l_ld="%{use_ld}"
     if [ ".$l_ld" = . ]; then
         l_ld=`sh $shtool path ld`
         if [ ".$l_ld" = . ]; then
             echo "openpkg: prerequisite tool \`ld' not found"
             exit 1
         fi
     fi
     echo "l_ld=\"$l_ld\"; export l_ld" >>.buildenv
     #   manually make sure as(1) is available
     l_as=""; export l_as
     [ ".%{?l_as:set}"   = .set ] && l_as="%{l_as}"
     [ ".%{?use_as:set}" = .set ] && l_as="%{use_as}"
     if [ ".$l_as" = . ]; then
         l_as=`sh $shtool path as`
         if [ ".$l_as" = . ]; then
             echo "openpkg: prerequisite tool \`as' not found"
             exit 1
         fi
     fi
     echo "l_as=\"$l_as\"; export l_as" >>.buildenv
     #   manually make sure strip(1) is available or use a null replacement
     l_strip=""; export l_strip
     [ ".%{?l_strip:set}"   = .set ] && l_strip="%{l_strip}"
     [ ".%{?use_strip:set}" = .set ] && l_strip="%{use_strip}"
     if [ ".$l_strip" = . ]; then
         l_strip=`sh $shtool path strip ls`
         if [ ".$l_strip" = . ]; then
             echo "openpkg: prerequisite tool \`strip' not found"
             exit 1
         fi
     fi
     echo "l_strip=\"$l_strip\"; export l_strip" >>.buildenv
     #   determine path to etc.usrgrp.sh script
     usrgrp=`SOURCE etc.usrgrp.sh`
     echo "usrgrp=$usrgrp; export usrgrp" >>./.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Determine OpenPKG User/Group Name/Id Pairs"; set -x
     #   determine user/group name/id pairs
     #   - bootstrapping: %{l_[smrn]{usr,grp}} is set via sed(1)
     #   - upgrading new: %{l_[smrn]{usr,grp}} is set via rpmmacros
     #   - upgrading old: %{l_[smrn]{usr,grp}} is not set at all
     susr=""; [ ".%{?l_susr:set}"  = .set ] && susr="%{l_susr}"
     sgrp=""; [ ".%{?l_sgrp:set}"  = .set ] && sgrp="%{l_sgrp}"
     musr=""; [ ".%{?l_musr:set}"  = .set ] && musr="%{l_musr}"
     mgrp=""; [ ".%{?l_mgrp:set}"  = .set ] && mgrp="%{l_mgrp}"
     rusr=""; [ ".%{?l_rusr:set}"  = .set ] && rusr="%{l_rusr}"
     rgrp=""; [ ".%{?l_rgrp:set}"  = .set ] && rgrp="%{l_rgrp}"
     nusr=""; [ ".%{?l_nusr:set}"  = .set ] && nusr="%{l_nusr}"
     ngrp=""; [ ".%{?l_ngrp:set}"  = .set ] && ngrp="%{l_ngrp}"
     #   corresponding ids
     suid=""; [ ".%{?l_suid:set}"  = .set ] && suid="%{l_suid}"
     sgid=""; [ ".%{?l_sgid:set}"  = .set ] && sgid="%{l_sgid}"
     muid=""; [ ".%{?l_muid:set}"  = .set ] && muid="%{l_muid}"
     mgid=""; [ ".%{?l_mgid:set}"  = .set ] && mgid="%{l_mgid}"
     ruid=""; [ ".%{?l_ruid:set}"  = .set ] && ruid="%{l_ruid}"
     rgid=""; [ ".%{?l_rgid:set}"  = .set ] && rgid="%{l_rgid}"
     nuid=""; [ ".%{?l_nuid:set}"  = .set ] && nuid="%{l_nuid}"
     ngid=""; [ ".%{?l_ngid:set}"  = .set ] && ngid="%{l_ngid}"
     #   compat:
     usr="";  [ ".%{?l_fsusr:set}" = .set ] && usr="%{l_fsusr}"
     grp="";  [ ".%{?l_fsgrp:set}" = .set ] && grp="%{l_fsgrp}"
     eval `sh $usrgrp \
           --usr="$usr" --grp="$grp" \
           --susr="$susr" --sgrp="$sgrp" \
           --musr="$musr" --mgrp="$mgrp" \
           --rusr="$rusr" --rgrp="$rgrp" \
           --nusr="$nusr" --ngrp="$ngrp" \
           --suid="$suid" --sgid="$sgid" \
           --muid="$muid" --mgid="$mgid" \
           --ruid="$ruid" --rgid="$rgid" \
           --nuid="$nuid" --ngid="$ngid"`
     echo "susr=\"$susr\"; export susr" >>.buildenv
     echo "sgrp=\"$sgrp\"; export sgrp" >>.buildenv
     echo "musr=\"$musr\"; export musr" >>.buildenv
     echo "mgrp=\"$mgrp\"; export mgrp" >>.buildenv
     echo "rusr=\"$rusr\"; export rusr" >>.buildenv
     echo "rgrp=\"$rgrp\"; export rgrp" >>.buildenv
     echo "nusr=\"$nusr\"; export nusr" >>.buildenv
     echo "ngrp=\"$ngrp\"; export ngrp" >>.buildenv
     echo "suid=\"$suid\"; export suid" >>.buildenv
     echo "sgid=\"$sgid\"; export sgid" >>.buildenv
     echo "muid=\"$muid\"; export muid" >>.buildenv
     echo "mgid=\"$mgid\"; export mgid" >>.buildenv
     echo "ruid=\"$ruid\"; export ruid" >>.buildenv
     echo "rgid=\"$rgid\"; export rgid" >>.buildenv
     echo "nuid=\"$nuid\"; export nuid" >>.buildenv
     echo "ngid=\"$ngid\"; export ngid" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Determine OpenPKG Instance Environment"; set -x
     #   determine installation location id
     if [ ".%{?l_tag_fmt:set}" = .set ]; then
         tag="%{l_tag_fmt}"
     else
         tag="<compat>"
     fi
     echo "tag=\"$tag\"; export tag" >>.buildenv
     #   determine platform id
     s=`(uname -s) 2>/dev/null` || s='Unknown'
     r=`(uname -r) 2>/dev/null` || r='0.0'
     plid="${s}/${r}"
     echo "plid=\"$plid\"; export plid" >>.buildenv
     #   determine platform specific build environment
     case $plid in
         FreeBSD/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         NetBSD/*  ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         Linux/*   ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         SunOS/*   ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
         UnixWare/*) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
         AIX/*     ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
         Darwin/*  ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         OSF1/V5.* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         HP-UX/*   ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         IRIX*/6.* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         CYGWIN*/* ) l_build_path="/bin:/usr/bin:/usr/sbin"       ;;
         *         ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
     esac
     case $plid in
         FreeBSD/* ) l_build_ldlp="/lib:/usr/lib" ;;
         NetBSD/*  ) l_build_ldlp="/lib:/usr/lib" ;;
         Linux/*   ) l_build_ldlp="/lib:/usr/lib" ;;
         SunOS/*   ) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
         UnixWare/*) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
         AIX/*     ) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
         Darwin/*  ) l_build_ldlp="/usr/lib" ;;
         OSF1/V5.* ) l_build_ldlp="/usr/lib" ;;
         HP-UX/*   ) l_build_ldlp="/usr/lib" ;;
         IRIX*/6.* ) l_build_ldlp="/usr/lib" ;;
         CYGWIN*/* ) l_build_ldlp="/lib:/usr/lib" ;;
         *         ) l_build_ldlp="/usr/lib" ;;
     esac
     case $plid in
         *         ) l_build_ulim=":" ;;
     esac
     echo "l_build_path=\"$l_build_path\"; export l_build_path" >>.buildenv
     echo "l_build_ldlp=\"$l_build_ldlp\"; export l_build_ldlp" >>.buildenv
     echo "l_build_ulim=\"$l_build_ulim\"; export l_build_ulim" >>.buildenv
     #   ACTIVATE AGAIN AFTER ALL 4.2.5 VERSIONS WERE UPGRADED TO AT LEAST 4.2.7
     #   determine status of unprivileged operation
     if [ ".%{?l_unprivileged:set}" = .set ]; then
         l_unprivileged="%{l_unprivileged}"
     else
         l_unprivileged="no"
     fi
     echo "l_unprivileged=\"$l_unprivileged\"; export l_unprivileged" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Build GNU gzip (Compression Tool)"; set -x
     #   bootstrap GNU zip tool
     ${l_tar} xf `SOURCE gzip-%{V_gzip}.tar` 2>/dev/null || true
     ( cd gzip-%{V_gzip}
       ( echo "ac_cv_prog_cc_g=no"
         echo "ac_cv_header_getopt_h=no"
       ) >config.cache
       case $plid in
           Darwin/* ) echo "gzip_cv_assembler=no" >>config.cache ;;
       esac
       CC="${l_cc}" \
       GREP="grep" \
       ./configure \
           --cache-file=./config.cache
       ${l_make} || exit $?
       ( mv gzip ..; ${l_make} clean || true; mv ../gzip . ) || exit $?
     ) || exit $?
     l_gzip="`pwd`/gzip-%{V_gzip}/gzip"; export l_gzip
     echo "l_gzip=\"$l_gzip\"; export l_gzip" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Unpack GNU configuration guessing utilities"; set -x
     #   unpack GNU config.guess
     ${l_gzip} -dc `SOURCE config-%{V_config}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Build GNU patch (Source Patching Tool)"; set -x
     #   bootstrap GNU patch tool
     ${l_gzip} -dc `SOURCE patch-%{V_patch}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
     ( cd patch-%{V_patch}
       chmod a+x install-sh
       echo '#!' >update-version.sh
       cp `SOURCE patch.Makefile.in` Makefile.in
       cp `SOURCE patch.strnlen.c` gl/lib/strnlen.c
       ( echo 'ac_cv_func_setmode=${ac_cv_func_setmode=no}'
         echo 'ac_cv_prog_cc_g=no'
         false=`sh $shtool path false`
         echo "ac_cv_path_ed_PROGRAM=\${ac_cv_path_ed_PROGRAM=$false}"
       ) >config.cache
       CC="${l_cc}" \
       ./configure \
           --cache-file=./config.cache \
           --enable-merge \
           --disable-largefile
       ${l_make} || exit $?
       ( mv src/patch ..; ${l_make} clean || true; mv ../patch . ) || exit $?
     ) || exit $?
     l_patch="`pwd`/patch-%{V_patch}/patch"; export l_patch
     case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
         *-cygwin* )
             #   Cygwin under Windows Vista dislikes executables with
             #   "patch" in the same and would require a "*.manifest"
             #   file applied with the "mt.exe" from the "Windows
             #   Software Development Kit (SDK)" in order to escape from
             #   UAC. An easy alternative is to just rename the file to a
             #   different name.
             mv patch-%{V_patch}/patch patch-%{V_patch}/pitch
             l_patch="`pwd`/patch-%{V_patch}/pitch"
             ;;
     esac
     echo "l_patch=\"$l_patch\"; export l_patch" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build GNU tar (Archiving Tool)"; set -x
     #   build GNU tar tool
     ${l_gzip} -dc `SOURCE tar-%{V_tar}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
     ( cd tar-%{V_tar}
       ${l_patch} -p0 <`SOURCE tar.patch`
       ( echo 'am_cv_func_iconv=no'
         echo 'am_cv_lib_iconv=no'
         echo 'ac_cv_lib_iconv_iconv=no'
         echo 'ac_cv_header_iconv_h=no'
         echo 'ac_cv_type_iconv_t=no'
       ) >config.cache
       CC="${l_cc}" \
       MAKEINFO="true" \
       GREP="grep" \
       FORCE_UNSAFE_CONFIGURE=1 \
       ./configure \
           --cache-file=./config.cache \
           --prefix=%{l_prefix} \
           --with-gzip=%{l_prefix}/lib/openpkg/gzip \
           --with-bzip2=%{l_prefix}/lib/openpkg/bzip2 \
           --disable-nls
       ${l_make} || exit $?
       ( mv src/tar ..; ${l_make} clean || true; mv ../tar . ) || exit $?
     ) || exit $?
     l_tar="`pwd`/tar-%{V_tar}/tar"; export l_tar
     echo "l_tar=\"$l_tar\"; export l_tar" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Unpack Distribution Tarballs"; set -x
     #   unpack distribution tarballs
     ${l_gzip} -dc `SOURCE rpm-%{V_rpm_major}.%{V_rpm_minor}.tar.gz`   | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE popt-%{V_popt}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE sqlite-%{V_sqlite}.tar.gz`                  | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE zlib-%{V_zlib}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE bzip2-%{V_bzip2}.tar.gz`                    | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE xz-%{V_xz}.tar.gz`                          | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE curl-%{V_curl}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE pcre-%{V_pcre}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE make-%{V_make}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE bash-%{V_bash}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE uuid-%{V_uuid}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE beecrypt-%{V_beecrypt}.tar.gz`              | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE perl-%{V_perl}-mini.tar.gz`                 | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE openssl-%{V_openssl}.tar.gz`                | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE libarchive-%{V_libarchive}.tar.gz`          | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE diffutils-%{V_diffutils}.tar.gz`            | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE svs-%{V_svs}.tar.gz`                        | ${l_tar} xf - 2>/dev/null || true
     #   update config.guess/config.sub
     for dir in curl-%{V_curl} make-%{V_make} bash-%{V_bash}/support; do
         chmod u+w $dir/config.guess $dir/config.sub >/dev/null 2>&1 || true
         cp config/config.guess $dir/
         cp config/config.sub   $dir/
     done
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Apply OpenPKG Patches to Distributions"; set -x
     #   apply OpenPKG patches to distribution trees
     ( cd rpm-%{V_rpm_major}.%{V_rpm_minor}
       sed -e "s;@l_prefix@;%{l_prefix};g" <`SOURCE rpm.patch` | ${l_patch} -p0
     ) || exit $?
     ( cd make-%{V_make}
       ${l_patch} -p0 <`SOURCE make.patch`
     ) || exit $?
     ( cd bash-%{V_bash}
       ${l_patch} -p0 <`SOURCE bash.patch`
       ${l_patch} -p0 <`SOURCE bash.patch.vendor`
       sleep 1
       touch y.tab.[ch]
       touch configure config.h.in
     ) || exit $?
     ( cd beecrypt-%{V_beecrypt}
       ${l_patch} -p0 <`SOURCE beecrypt.patch`
     ) || exit $?
     ( cd perl-%{V_perl}
       ${l_patch} -p0 <`SOURCE perl.patch`
     ) || exit $?
     ( cd openssl-%{V_openssl}
       ${l_patch} -p0 <`SOURCE openssl.patch`
     ) || exit $?
     ( cd popt-%{V_popt}
       ${l_patch} -p0 <`SOURCE popt.patch`
     ) || exit $?
     ( cd sqlite-%{V_sqlite}
       ${l_patch} -p0 <`SOURCE sqlite.patch`
     ) || exit $?
     ( cd curl-%{V_curl}
       ${l_patch} -p0 <`SOURCE curl.patch`
     ) || exit $?
     ( cd pcre-%{V_pcre}
       ${l_patch} -p0 <`SOURCE pcre.patch`
     ) || exit $?
     ( cd diffutils-%{V_diffutils}
       ${l_patch} -p0 <`SOURCE diffutils.patch`
     ) || exit $?
     ( cd libarchive-%{V_libarchive}
       ${l_patch} -p0 <`SOURCE libarchive.patch`
     ) || exit $?
     ( cd zlib-%{V_zlib}
       ${l_patch} -p0 <`SOURCE zlib.patch`
     ) || exit $?
     ( cd xz-%{V_xz}
       ${l_patch} -p0 <`SOURCE xz.patch`
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Build GNU make (Build Tool)"; set -x
     #   bootstrap GNU make tool
     ( cd make-%{V_make}
       CC="${l_cc}" \
       ./configure \
           --without-libiconv-prefix \
           --without-libintl-prefix \
           --disable-nls \
           --disable-largefile
       ${l_make}
       ( mv make ..; ${l_make} clean || true; mv ../make . ) || exit $?
     ) || exit $?
     l_make="`pwd`/make-%{V_make}/make"; export l_make
     echo "l_make=\"$l_make\"; export l_make" >>.buildenv
 %build
     #   skip in bootstrap phase 2 (see openpkg.boot)
     [ ".$OPENPKG_BOOT" = .1 ] && exit 0
     #   switch into a temporary build area
     cd openpkg-%{version}
     . ./.buildenv
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build GNU bash (Bourne-again Shell)"; set -x
     #   build GNU bash tool
     ( cd bash-%{V_bash}
       sh $shtool subst \
           -e 's;@l_openpkg_release@;OpenPKG;' \
           version.c
       ( #   force disabled wide character support
         echo "ac_cv_header_wchar_h=no"
         echo "ac_cv_header_wctype_h=no"
         echo "ac_cv_func_mbsrtowcs=no"
         #   force disabled internationalization support
         echo "ac_cv_header_libintl_h=no"
         echo "ac_cv_func_gettext=no"
         echo "ac_cv_func_textdomain=no"
         echo "ac_cv_func_bindtextdomain=no"
         echo "ac_cv_lib_intl_bindtextdomain=no"
         #   disable building with debug symbols
         echo "ac_cv_prog_cc_g=no"
       ) >config.cache
       AUTOCONF="true"
       export AUTOCONF
       CC="${l_cc}"
       export CC
       case "$plid" in
           Darwin/* ) LDFLAGS="-Wl,-search_paths_first" ;;
       esac
       ./configure \
           --cache-file=./config.cache \
           --prefix=%{l_prefix} \
           --without-curses \
           --without-gnu-malloc \
           --disable-nls
       ${l_make} || exit $?
       ( mv bash ..; ${l_make} clean || true; mv ../bash . ) || exit $?
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build GNU bzip2 (Compression Library)"; set -x
     #   build BZIP2 library
     ( cd bzip2-%{V_bzip2}
       ${l_make} CC="${l_cc}" CFLAGS="-O" libbz2.a bzip2 || exit $?
       ( echo "# libbz2.la - a libtool library file"
         echo "# Generated by ltmain.sh - GNU libtool x.x.x"
         echo "dlname=''"
         echo "library_names=''"
         echo "old_library='libbz2.a'"
         echo "dependency_libs=''"
         echo "current=0"
         echo "age=0"
         echo "revision=0"
         echo "installed=no"
         echo "dlopen=''"
         echo "dlpreopen=''"
         echo "libdir='%{l_prefix}'"
       ) >libbz2.la
       ln -s . .libs
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build Zlib (Compression Library)"; set -x
     #   build ZLIB library
     ( cd zlib-%{V_zlib}
       CC="${l_cc}" CFLAGS="-O" ./configure
       ${l_make} CC="${l_cc}" libz.a || exit $? # intentionally do not pass CFLAGS here
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build XZ (Compression Library)"; set -x
     #   build XZ library
     ( cd xz-%{V_xz}
       opts=""
       case "$plid" in
           Darwin/* ) opts="--disable-assembler" ;;
       esac
       CC="${l_cc}" \
       CFLAGS="-O" \
       ./configure \
           --prefix=%{l_prefix} \
           --libdir="%{l_prefix}/lib" \
           --mandir=%{l_prefix}/man \
           --without-libiconv-prefix \
           --without-libintl-prefix \
           --disable-nls \
           --disable-shared \
           $opts
       ${l_make} || exit $?
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build OSSP uuid (UUID Generation Tool)"; set -x
     #   build OSSP uuid tool
     ( cd uuid-%{V_uuid}
       CC="${l_cc}" \
       CFLAGS="-O" \
       GREP="grep" \
       ./configure \
         --prefix=%{l_prefix} \
         --disable-shared
       ${l_make} || exit $?
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build Perl (Programming Language)"; set -x
     #   build Perl tool
     ( cd perl-%{V_perl}
       chmod -R u+w .
       sh $shtool subst \
           -e 's;\(.*for thislib in $libswanted.*\);libswanted=`echo " $libswanted " | sed -e "s/ bind / /g" -e "s/ db / /g" -e "s/ gdbm / /g" -e "s/ iconv / /g"`\; \1;' \
           -e 's;package=perl5;package=perl;' \
           Configure
       sh $shtool subst \
           -e 's; */usr/local/lib;;' \
           hints/freebsd.sh hints/netbsd.sh
       libdirs=""
       for dir in %{l_prefix}/lib /lib64 /usr/lib64 /lib /usr/lib /usr/ccs/lib; do
           [ -d $dir ] && libdirs="$libdirs $dir"
       done
       ./Configure \
           -d -e -s \
           -Dprefix=%{l_prefix} \
           -Dvendorprefix=%{l_prefix} \
           -Dinstallprefix=%{l_prefix} \
           -Dinstallstyle="lib/perl5" \
           -Dman1dir=%{l_prefix}/man/man1 \
           -Dman3dir=%{l_prefix}/man/man3 \
           -Dcc="${l_cc}" -Uoptimize \
           -Dlocincpth="%{l_prefix}/include" \
           -Dloclibpth="%{l_prefix}/lib" \
           -Dlibs="-lm" \
           -Dldflags="-L""%{l_prefix}/lib" \
           -Dlibpth="$libdirs" \
           -Dglibpth="$libdirs" \
           -Dscriptdir="%{l_prefix}/bin" \
           -Uinstallusrbinperl \
           -Adefine:useshrplib='false' \
           -Ui_malloc -Ui_iconv -Ui_db
       case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
           *-cygwin* ) miniperl="miniperl.exe" ;;
           * )         miniperl="miniperl"     ;;
       esac
       ${l_make} $miniperl || exit $?
       rm -f *.o >/dev/null 2>&1 || true
     ) || exit $?
     l_perl="`pwd`/perl-%{V_perl}/miniperl"; export l_perl
     echo "l_perl=\"$l_perl\"; export l_perl" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build OpenSSL (Crypography and SSL/TLS Toolkit)"; set -x
     #   build OpenSSL toolkit
     ( cd openssl-%{V_openssl}
       sh $shtool subst \
           -e 's;-m64 *;;g' \
           -e 's;-xarch=amd64 *;;g' \
           -e 's;-m486;-march=i486;g' \
           -e 's;BN_LLONG *;;' \
           Configure
       sh $shtool subst \
           -e 's;test "$OSTYPE" = msdosdjgpp;true;' \
           util/point.sh
       sh $shtool subst \
           -e "1s;^.*\$;#!$l_perl;" \
           Configure `find . -name "*.pl" -print`
       opts=""
       case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
           *-solaris*       ) opts="-lnsl -lsocket" ;;
       esac
       case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
           amd64-*          ) opts="$opts -fPIC" ;;
           ia64-*           ) opts="$opts -fPIC" ;;
           sparc64-freebsd* ) opts="$opts -fPIC" ;;
       esac
       CC="${l_cc}" \
       PERL="${l_perl}" \
       ./config \
           --prefix=%{l_prefix} \
           no-asm no-shared no-dso \
           no-zlib no-idea no-threads no-krb5 no-hw \
           $opts
       ${l_make} CC="${l_cc}" build_libs build_apps || exit $?
       ( mkdir lib; cd lib; ln -s ../lib*.a . ) || exit $?
     ) || exit $?
     #   build BSD libarchive
     ( cd libarchive-%{V_libarchive}
       sh $shtool subst \
           -e 's;\(AM_CFLAGS =\) -Wall;\1;' \
           Makefile.in
       CC="${l_cc}" \
       CFLAGS="-O -D_POSIX_PTHREAD_SEMANTICS" \
       CPPFLAGS="-I`pwd`/../zlib-%{V_zlib} -I`pwd`/../bzip2-%{V_bzip2} -I`pwd`/../xz-%{V_xz}/src/liblzma/api -I`pwd`/../openssl-%{V_openssl}/include" \
       LDFLAGS="-L`pwd`/../zlib-%{V_zlib} -L`pwd`/../bzip2-%{V_bzip2} -L`pwd`/../xz-%{V_xz}/src/liblzma/.libs -L`pwd`/../openssl-%{V_openssl}" \
       GREP="grep" \
       ./configure \
           --prefix=%{l_prefix} \
           --libdir="%{l_prefix}/lib" \
           --enable-bsdtar \
           --enable-bsdcpio \
           --with-zlib \
           --with-bz2lib \
           --with-lzma \
           --without-lzmadec \
           --with-openssl \
           --without-xml2 \
           --without-expat \
           --without-iconv \
           --disable-shared
       ${l_make} || exit $?
       ( mv bsdcpio bsdtar ..; ${l_make} clean || true; mv ../bsdcpio ../bsdtar . ) || exit $?
     ) || exit $?
     #   build GNU diffutils
     ( cd diffutils-%{V_diffutils}
       CC="${l_cc}" \
       CFLAGS="-O" \
       ./configure \
           --prefix=%{l_prefix} \
           --disable-nls
       touch man/diff.1 man/diff3.1 && ${l_make} || exit $?
       ( mv src/diff src/diff3 src/sdiff src/cmp ..
         ${l_make} clean || true
         mv ../diff ../diff3 ../sdiff ../cmp .
       ) || exit $?
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build cURL (URL Fetching Tool)"; set -x
     #   build cURL tool
     ( cd curl-%{V_curl}
       ( echo 'ac_cv_header_openssl_engine_h=no'
         echo 'lt_cv_prog_compiler_c_o_F77=no'
         echo 'lt_cv_sys_max_cmd_len=100'
       ) >config.cache
       CC="${l_cc}" \
       CFLAGS="-I`pwd`/../zlib-%{V_zlib}" \
       CPPFLAGS="-I`pwd`/../zlib-%{V_zlib}" \
       LDFLAGS="-L`pwd`/../zlib-%{V_zlib}" \
       GREP="grep" \
       ./configure \
           --cache-file=./config.cache \
           --libdir="%{l_prefix}/lib" \
           --without-libidn \
           --disable-shared \
           --disable-thread \
           --disable-ipv6 \
           --disable-ldap \
           --with-zlib=`pwd`/../zlib-%{V_zlib} \
           --with-ssl=`pwd`/../openssl-%{V_openssl} \
           --with-ca-bundle=%{l_prefix}/etc/openpkg/openpkg.x509
       ${l_make} || exit $?
       mv src/curl ..; ${l_make} clean || true; mv ../curl .
     ) || exit $?
     #   build PCRE library
     ( cd pcre-%{V_pcre}
       CC="${l_cc}" \
       CFLAGS="-O" \
       GREP="grep" \
       ./configure \
           --disable-cpp \
           --disable-utf8 \
           --disable-shared
       ${l_make} || exit $?
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build BeeCrypt (Cryptography Library)"; set -x
     #   build BeeCrypt library
     ( cd beecrypt-%{V_beecrypt}
       sh $shtool subst \
           -e 's;^[ 	][ 	]*#;#;' \
           aes.c base64.c blockmode.c blowfish.c entropy.c fips186.c md4.c md5.c \
           mp.c mtprng.c ripemd128.c ripemd160.c ripemd256.c ripemd320.c rsa.c \
           sha1.c sha224.c sha256.c sha2k64.c sha384.c sha512.c timestamp.c
       sh $shtool subst \
          -e 's;cppglue\.lo;;g' \
          -e 's;cppglue\.cxx;;g' \
          -e '/^CXX = /s;@CXX@;@CC@;g' \
          Makefile.in
       ( echo 'ac_cv_have_dev_dsp=no'
         echo 'ac_cv_have_dev_audio=no'
         echo 'ac_cv_func_gettimeofday=yes'
         echo 'bc_cv_as_noexecstack=no'
       ) >config.cache
       CC="${l_cc}" \
       CFLAGS="-O" \
       ./configure \
         --cache-file=./config.cache \
         --prefix=%{l_prefix} \
           --libdir="%{l_prefix}/lib" \
         --with-cpu=none \
         --with-arch=none \
         --without-cplusplus \
         --without-java \
         --without-python \
         --disable-expert-mode \
         --disable-aio \
         --disable-openmp \
         --disable-threads \
         --disable-shared
       ${l_make} || exit $?
       cp .libs/libbeecrypt.a .
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build POPT (Option Parsing Library)"; set -x
     #   build POPT library
     ( cd popt-%{V_popt}
       CC="${l_cc}" \
       CFLAGS="-O" \
       CPPFLAGS="-DOPENPKG -DPOPT_fprintf=fprintf" \
       GREP="grep" \
       ./configure \
           --prefix=%{l_prefix} \
           --libdir="%{l_prefix}/lib" \
           --disable-shared \
           --with-included-gettext \
           --without-libintl-prefix \
           --without-libiconv-prefix \
           --disable-nls
       ${l_make}
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build SQLite (RDBMS Library)"; set -x
     #   build SQLite library
     ( cd sqlite-%{V_sqlite}
       CC="${l_cc}" \
       CFLAGS="-O" \
       LIBS="-lm" \
       GREP="grep" \
       ./configure \
           --prefix=%{l_prefix} \
           --libdir="%{l_prefix}/lib" \
           --disable-threadsafe \
           --disable-readline \
           --disable-debug \
           --disable-amalgamation \
           --disable-tcl \
           --disable-shared
       ${l_make}
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build RPM (RPM Package Manager)"; set -x
     #   build RPM
     ( br=`pwd`
       cd rpm-%{V_rpm_major}.%{V_rpm_minor}
       #   remove unused and undefined methods
       sh $shtool subst \
           -e 's;^\(#include  *<[^>][^>]*>\);/*\1*/;g' \
           rpmconstant/rpmconstant.h
       #   Avoid bugs causing 'fatal problems'
       sh $shtool subst \
           -e 's;\(rc = INTEGRITY\)_ERROR;\1_OK;g' \
           -e 's;integrity_check_message("%s\\n", result);((void)0);g' \
           rpmqv.c
       #   provide nonstandard constructs
       cat > nonstandard.h <<EOF
 /* MSvB: define missing nonstandard GCC builtin extensions */
 #ifndef __GNUC__
 #define __builtin_expect(e,n) (e)
 #endif /* ifndef __GNUC__ */
 EOF
       #   cheat GNU Autoconf
       ( echo 'ac_cv_path_MSGFMT=:'
         echo 'ac_cv_path_GMSGFMT=:'
         echo 'ac_cv_path_XGETTEXT=:'
         echo 'ac_cv_path_MSGMERGE=:'
         echo "ac_cv_header_getopt_h=no"
         echo "ac_cv_lib_gz_gzread=no"
       ) >config.cache
       #   use miniperl
       PERL="${l_perl}"
       export PERL
       #   set build tool flags
       CC="${l_cc}"
       CFLAGS=""
       CPPFLAGS="-DRPM_VENDOR_OPENPKG"
       LDFLAGS=""
       LIBS=""
       LIBS="$LIBS -lm"
       export CC
       export CFLAGS
       export CPPFLAGS
       export LDFLAGS
       export LIBS
       #   special platform workarounds
       GREP="grep"
       export GREP
       #   determine POPT option, RPM macros and Lua script file paths
       RPMPOPT="%{l_prefix}/lib/openpkg/rpmpopt"
       RPMPOPT="$RPMPOPT:%{l_prefix}/etc/openpkg/rpmpopt"
       RPMPOPT="$RPMPOPT:%{l_prefix}/etc/openpkg/rpmpopt.d/*"
       RPMPOPT="$RPMPOPT:~/.openpkg/rpmpopt"
       RPMPOPT="$RPMPOPT:@../../.openpkg/rpmpopt"
       RPMPOPT="$RPMPOPT:@../.openpkg/rpmpopt"
       RPMPOPT="$RPMPOPT:@./.openpkg/rpmpopt"
       RPMMACROS="%{l_prefix}/lib/openpkg/rpmmacros"
       RPMMACROS="$RPMMACROS:%{l_prefix}/etc/openpkg/rpmmacros"
       RPMMACROS="$RPMMACROS:%{l_prefix}/etc/openpkg/rpmmacros.d/*"
       RPMMACROS="$RPMMACROS:~/.openpkg/rpmmacros"
       RPMMACROS="$RPMMACROS:@../../.openpkg/rpmmacros"
       RPMMACROS="$RPMMACROS:@../.openpkg/rpmmacros"
       RPMMACROS="$RPMMACROS:@./.openpkg/rpmmacros"
       RPMLUA="%{l_prefix}/lib/openpkg/rpmlua"
       RPMLUA="$RPMLUA:%{l_prefix}/etc/openpkg/rpmlua"
       RPMLUA="$RPMLUA:%{l_prefix}/etc/openpkg/rpmlua.d/*"
       RPMLUA="$RPMLUA:~/.openpkg/rpmlua"
       RPMLUA="$RPMLUA:@../../.openpkg/rpmlua"
       RPMLUA="$RPMLUA:@../.openpkg/rpmlua"
       RPMLUA="$RPMLUA:@./.openpkg/rpmlua"
       #   parametrize integrity checking framework
       sh $shtool subst \
           -e "s;0000000000000000000000000000000000000000;7D121A8FC05DC18A4329E9EF67042EC961B7AE34;" \
           -e "s;0\\.0\\.0;0.9.0;" \
           rpmqv.c
       #   disable building of any tests
       #   (mainly because those would fail because of integrity checking anyway)
       sh $shtool subst \
           -e 's;tools scripts tests doc;tools scripts doc;' \
           Makefile.in
       #   configure program
       ./configure \
           --cache-file=./config.cache \
           --prefix=%{l_prefix} \
           --libdir="%{l_prefix}/lib" \
           --mandir="%{l_prefix}/man" \
           --includedir="%{l_prefix}/include/openpkg" \
           --with-name="OpenPKG RPM" \
           --with-path-cfg="%{l_prefix}/etc/openpkg" \
           --with-path-rpmpopt="$RPMPOPT" \
           --with-path-macros="$RPMMACROS" \
           --with-path-rpmlua="$RPMLUA" \
           --with-path-lib="%{l_prefix}/lib/openpkg" \
           --with-path-locale="%{l_prefix}/share/openpkg/locale" \
           --with-path-database="%{l_prefix}/RPM/DB" \
           --with-path-sources="%{l_prefix}/RPM" \
           --with-bugreport="openpkg-users@openpkg.org" \
           --with-beecrypt="$br/beecrypt-%{V_beecrypt}" \
           --with-openssl="$br/openssl-%{V_openssl}" \
           --with-zlib="$br/zlib-%{V_zlib}" \
           --with-bzip2="$br/bzip2-%{V_bzip2}" \
           --with-popt="$br/popt-%{V_popt}" \
           --with-sqlite="$br/sqlite-%{V_sqlite}" \
           --with-pcre="$br/pcre-%{V_pcre}" \
           --with-uuid="$br/uuid-%{V_uuid}" \
           --with-lua="internal" \
           --with-db="internal" \
           --without-db-rpc \
           --without-db-largefile \
           --with-db-tools-integrated \
           --with-db-mutex="UNIX/fcntl" \
           --without-file \
           --without-neon \
           --without-pthreads \
           --without-libelf \
           --without-selinux \
           --without-perl \
           --without-python \
           --without-apidocs \
           --disable-build-warnings \
           --disable-build-extlibdep \
           --disable-build-intlibdep \
           --disable-build-lafiles \
           --disable-shared \
           --disable-rpath \
           --disable-nls
       #   build program
       ${l_make}
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build OpenPKG Frontend (Setuid Wrapper)"; set -x
     #   build "openpkg" executable
     ${l_make} -f `SOURCE openpkg.mk` \
           CC="${l_cc}" \
           OPENPKG_PREFIX="%{l_prefix}" \
           OPENPKG_SUSR="%{l_susr}" \
           OPENPKG_MUSR="%{l_musr}" \
           OPENPKG_DOT_C="`SOURCE openpkg.c`"
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build OpenPKG Mutual Exclusion (MutEx) Utility"; set -x
     #   build "mutex" executable
     ${l_make} -f `SOURCE mutex.mk` \
           CC="${l_cc}" \
           CPPFLAGS="-Ipopt-%{V_popt}" \
           LDFLAGS="-Lpopt-%{V_popt} -Lpopt-%{V_popt}/.libs" \
           MUTEX_DOT_C="`SOURCE mutex.c`"
 %install
     #   skip in bootstrap phase 2 (see openpkg.boot)
     [ ".$OPENPKG_BOOT" = .1 ] && exit 0
     #   switch into a temporary build area
     cd openpkg-%{version}
     . ./.buildenv
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Create Installation Filesystem Hierarchy"; set -x
     #   create installation hierarchy
     rm -rf $RPM_BUILD_ROOT
     sh $shtool mkdir -f -p -m 755 $RPM_BUILD_ROOT%{l_prefix}
     for dir in bin etc include info lib libexec man sbin share var cgi pub local; do
         test -d $RPM_BUILD_ROOT%{l_prefix}/$dir || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/$dir
     done
     for i in 1 2 3 4 5 6 7 8 9; do
         test -d $RPM_BUILD_ROOT%{l_prefix}/man/man$i || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/man/man$i
         test -d $RPM_BUILD_ROOT%{l_prefix}/man/cat$i || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/man/cat$i
     done
     for dir in PKG bin etc include info lib man sbin; do
         test -d $RPM_BUILD_ROOT%{l_prefix}/local/$dir || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/local/$dir
     done
     for i in 1 2 3 4 5 6 7 8 9; do
         test -d $RPM_BUILD_ROOT%{l_prefix}/local/man/man$i || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/local/man/man$i
         test -d $RPM_BUILD_ROOT%{l_prefix}/local/man/cat$i || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/local/man/cat$i
     done
     test -d $RPM_BUILD_ROOT%{l_prefix}/RPM || \
     mkdir $RPM_BUILD_ROOT%{l_prefix}/RPM
     for dir in SRC PKG DB TR TMP; do
         test -d $RPM_BUILD_ROOT%{l_prefix}/RPM/$dir || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/RPM/$dir
     done
     mkdir $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Installation of RPM"; set -x
     #   install RPM into installation hierarchy
     ( cd rpm-%{V_rpm_major}.%{V_rpm_minor}
       ${l_make} install DESTDIR="$RPM_BUILD_ROOT"
       cp lua/rpmlua $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/lua
       chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/lua
     ) || exit $?
     #   postadjust RPM installation
     mv  $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/macros \
         $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmmacros
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Install Additional Files"; set -x
     #   add additional development files
     cp rpm-%{V_rpm_major}.%{V_rpm_minor}/rpmio/glob.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
     cp zlib-%{V_zlib}/zlib.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
     cp zlib-%{V_zlib}/zconf.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
     cp zlib-%{V_zlib}/libz.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmz.a
     cp bzip2-%{V_bzip2}/bzlib.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
     cp bzip2-%{V_bzip2}/libbz2.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmbz2.a
     cp beecrypt-%{V_beecrypt}/include/beecrypt/beecrypt.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
     cp beecrypt-%{V_beecrypt}/libbeecrypt.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmbeecrypt.a
     cp popt-%{V_popt}/popt.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
     cp popt-%{V_popt}/.libs/libpopt.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmpopt.a
     cp sqlite-%{V_sqlite}/sqlite3.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
     cp sqlite-%{V_sqlite}/.libs/libsqlite3.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmsqlite3.a
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Postadjust Installation"; set -x
     #   move C API into custom locations
     mv $RPM_BUILD_ROOT%{l_prefix}/lib/librpm* \
        $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/
     mv $RPM_BUILD_ROOT%{l_prefix}/lib/pkgconfig/rpm.pc \
        $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/
     #   FIXME: does the rpm.pc really work this way?
     #   move rpm tool to custom location
     mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpm \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
     mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpm.8 \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm.8
     ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm >/dev/null 2>&1 || true
     #   move rpm2cpio tool to custom location
     mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpm2cpio \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm2cpio
     mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpm2cpio.8 \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm2cpio.8
     ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm2cpio >/dev/null 2>&1 || true
     #   move rpmconstant tool to custom location
     mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpmconstant \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmconstant
     mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmconstant.8 \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmconstant.8
     ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmconstant >/dev/null 2>&1 || true
     #   move rpmcache tool to custom location
     mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpmcache \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmcache
     mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmcache.8 \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmcache.8
     ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmcache >/dev/null 2>&1 || true
     #   move rpmgrep tool to custom location
     mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpmgrep \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmgrep
     mv $RPM_BUILD_ROOT%{l_prefix}/man/man1/rpmgrep.1 \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmgrep.1
     ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmgrep >/dev/null 2>&1 || true
     #   move manual pages to custom location
     mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmdeps.8 \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmdeps.8
     mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmgraph.8 \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmgraph.8
     mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmbuild.8 \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmbuild.8
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Stripping Down Installation"; set -x
     #   strip RPM installation
     ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/bin/* \
           $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/* >/dev/null 2>&1 || true
     for file in rpmbuild gendiff; do
         rm -f $RPM_BUILD_ROOT%{l_prefix}/bin/$file >/dev/null 2>&1 || true
     done
     for dir in RPMS SRPMS SPEC SOURCES BUILD; do
         rm -rf $RPM_BUILD_ROOT%{l_prefix}/RPM/$dir >/dev/null 2>&1 || true
     done
     rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man1/* >/dev/null 2>&1 || true
     rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man3/* >/dev/null 2>&1 || true
     rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/lib*.la >/dev/null 2>&1 || true
     rm -rf $RPM_BUILD_ROOT%{l_prefix}/lib/pkgconfig >/dev/null 2>&1 || true
     for file in \
         brp-compress brp-python-bytecompile brp-java-gcjcompile brp-strip brp-strip-comment-note \
         brp-nobuildrootpath brp-strip-shared brp-strip-static-archive brp-sparc64-linux check-files \
         cross-build executabledeps.sh find-debuginfo.sh find-lang.sh find-prov.pl find-req.pl \
         find-provides.perl find-requires.perl getpo.sh http.req javadeps.sh libtooldeps.sh mono-find-provides \
         mono-find-requires osgideps.pl pkgconfigdeps.sh perldeps.pl perl.prov perl.req pythondeps.sh \
         php.prov php.req rpmdb_loadcvt rpm.daily rpm.log rpm.xinetd symclash.py symclash.sh tgpg u_pkg.sh \
         vpkg-provides.sh vpkg-provides2.sh install-sh mkinstalldirs; do
         rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$file >/dev/null 2>&1 || true
     done
     for file in \
         db_archive db_checkpoint db_deadlock db_dump db_hotbackup db_load \
         db_printlog db_recover db_stat db_upgrade db_verify; do
         rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$file >/dev/null 2>&1 || true
     done
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Install Additional Tools"; set -x
     #   install lsync tool
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE lsync` \
         >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE dot.lsyncrc` \
         >$RPM_BUILD_ROOT%{l_prefix}/local/.lsyncrc
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE lsync.8` \
         >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync.8
     #   install rpm-config tool
     ( l_prefix="%{l_prefix}"
       l_cc="%{l_cc}"
       l_cflags=""
       l_cppflags="-DOPENPKG -I${l_prefix}/include/openpkg/rpm -I${l_prefix}/include/openpkg"
       l_ldflags="-L${l_prefix}/lib/openpkg"
       l_libs="-lrpmbuild -lrpm -lrpmio -lrpmdb -lrpmmisc -lrpmsqlite3 -lrpmpopt -lrpmbeecrypt -lrpmbz2 -lrpmz"
       sed -e "s:@l_prefix@:%{l_prefix}:g" \
           -e "s:@l_cc@:$l_cc:g" \
           -e "s:@l_cflags@:$l_cflags:g" \
           -e "s:@l_cppflags@:$l_cppflags:g" \
           -e "s:@l_ldflags@:$l_ldflags:g" \
           -e "s:@l_libs@:$l_libs:g" \
           -e "s:@l_version@:%{V_rpm_major}.%{V_rpm_minor}:g" \
           <`SOURCE rpm-config.sh` \
           >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config
     ) || exit $?
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config
     sed -e "s:RPM_VERSION:%{V_rpm_major}.%{V_rpm_minor}:g" \
         <`SOURCE rpm-config.8` \
         >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config.8
     #   install OpenPKG registry commands
     mv  $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm \
         $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpm
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         `SOURCE rpm.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
     chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         `SOURCE register.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register
     chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register
     cp `SOURCE register.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register.8
     #   allow GNU shtool to be called as "openpkg shtool" from external, too.
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         `SOURCE shtool.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/shtool.sh
     chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/shtool.sh
     #   install OpenPKG tool chain command subset
     cp `SOURCE curl.sh`  $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/curl.sh
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/curl.sh
     cp `SOURCE build.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.pl
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.pl
     cp `SOURCE build.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.8
     cp `SOURCE index.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/index.pl
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/index.pl
     cp `SOURCE index.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/index.8
     cp `SOURCE search.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/search.pl
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/search.pl
     cp `SOURCE search.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/search.8
     cp `SOURCE mirror.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/mirror.pl
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/mirror.pl
     cp `SOURCE mirror.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/mirror.8
     cp `SOURCE makeproxy.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/makeproxy.pl
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/makeproxy.pl
     cp `SOURCE makeproxy.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/makeproxy.8
     cp `SOURCE lint-fsl.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-fsl.pl
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-fsl.pl
     cp `SOURCE lint-rc.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-rc.pl
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-rc.pl
     cp `SOURCE lint-rpm.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-rpm.pl
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-rpm.pl
     cp `SOURCE lint-spec.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-spec.pl
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-spec.pl
     cp `SOURCE dev.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/dev.pl
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/dev.pl
     cp `SOURCE dev.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/dev.8
     cp `SOURCE sea.sh` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/sea.sh
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/sea.sh
     cp `SOURCE sea.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/sea.8
     cp `SOURCE stack.sh` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/stack.sh
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/stack.sh
     cp `SOURCE stack.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/stack.8
     #   install RPM extension
     ( cd perl-%{V_perl}
       cp miniperl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/miniperl
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/miniperl
     ) || exit $?
     ( cd openssl-%{V_openssl}
       cp apps/openssl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openssl
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openssl
     ) || exit $?
     ( cd curl-%{V_curl}
       cp curl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/curl
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/curl
     ) || exit $?
     ( cd bzip2-%{V_bzip2}
       cp bzip2 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bzip2
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bzip2
     ) || exit $?
     ( cd gzip-%{V_gzip}
       cp gzip $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/gzip
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/gzip
     ) || exit $?
     ( cd xz-%{V_xz}
       cp src/xz/xz $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/xz
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/xz
     ) || exit $?
     ( cd patch-%{V_patch}
       cp patch $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/patch
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/patch
     ) || exit $?
     ( cd tar-%{V_tar}
       cp tar $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/tar
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/tar
     ) || exit $?
     ( cd bash-%{V_bash}
       cp bash $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bash
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bash
     ) || exit $?
     ( cd uuid-%{V_uuid}
       cp uuid $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/uuid
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/uuid
     ) || exit $?
     ( cd sqlite-%{V_sqlite}
       cp sqlite3 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/sqlite3
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/sqlite3
     ) || exit $?
     ( cd libarchive-%{V_libarchive}
       cp bsdcpio $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bsdcpio
       cp bsdtar $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bsdtar
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bsdcpio
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bsdtar
     ) || exit $?
     ( cd diffutils-%{V_diffutils}
       ${l_strip} diff diff3 sdiff cmp
       cp diff diff3 sdiff cmp $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/
     ) || exit $?
     ( cd svs-%{V_svs}
       sed -e "s;/bin/sh;%{l_prefix}/lib/openpkg/bash;" \
           -e "s;^\(  *\)\(diff \);\1%{l_prefix}/lib/openpkg/\2;" \
           <svs.sh >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/svs
       chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/svs
       cp svs.1 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/svs.1
     ) || exit $?
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         -e "s;@l_musr@;%{l_musr};g" \
         -e "s;@l_mgrp@;%{l_mgrp};g" \
         <`SOURCE uuid.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE uuid.8` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid.8
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE release.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE release.8` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release.8
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         -e "s;@l_musr@;%{l_musr};g" \
         -e "s;@l_mgrp@;%{l_mgrp};g" \
         <`SOURCE rpmdb` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmdb
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmdb
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rpmtool` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmtool
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmtool
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         -e "s;@l_musr@;%{l_musr};g" \
         -e "s;@l_mgrp@;%{l_mgrp};g" \
         <`SOURCE license.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/license
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/license
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE license.8` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/license.8
     #   install OpenPKG tool chain execution frontend and execution wrapper
     cp openpkg $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
     ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
     chmod 4775 $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE openpkg.sh` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openpkg
     chmod 755 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openpkg
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE openpkg.1` \
         >$RPM_BUILD_ROOT%{l_prefix}/man/man1/openpkg.1
     #   install more OpenPKG tool chain commands
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE man.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/man
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/man
     #   install OpenPKG mutex utility
     cp mutex $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/mutex
     #   install an own copy of shtool
     cp $shtool $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/shtool
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/shtool
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Install Configuration Files"; set -x
     #   install a few README files
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE root.README` \
         >$RPM_BUILD_ROOT%{l_prefix}/README
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE local.README` \
         >$RPM_BUILD_ROOT%{l_prefix}/local/README
     #   install Bash environment
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE dot.bashrc` \
         >$RPM_BUILD_ROOT%{l_prefix}/.bashrc
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE dot.bash_login` \
         >$RPM_BUILD_ROOT%{l_prefix}/.bash_login
     #   install Runcommand files
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         -e "s:@l_susr@:%{l_susr}:g" \
         -e "s:@l_musr@:%{l_musr}:g" \
         <`SOURCE rc` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/rc
     chmod 755 $RPM_BUILD_ROOT%{l_prefix}/etc/rc
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rc.conf` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/rc.conf
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.conf
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rc.func` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/rc.func
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.func
     mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         -e "s:@l_musr@:%{l_musr}:g" \
         <`SOURCE rc.openpkg` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/rc.openpkg
     chmod 755 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/rc.openpkg
     ( echo "#!/bin/sh"
       echo "exec %{l_prefix}/etc/rc \${1+\"\$@\"}"
     ) >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc
     chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc
     ln  $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc \
         $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rc
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rc.8` \
         >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc.8
     #   create configuration directory
     test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg
     #   install platform identification file
     sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-any-%<sp>" \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/platform
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/platform
     #   install UUID configuration file (ghost)
     touch $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/uuid
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/uuid
     #   install registry configuration files (ghost)
     touch \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.conf \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.prep \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.tran \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.util
     chmod 644 \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.conf \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.prep \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.tran \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.util
     #   install default managers configuration file
     ( echo "##"
       echo "##  managers -- OpenPKG Instance Managers"
       echo "##"
       echo ""
       echo "%{l_susr}"
       echo "%{l_musr}"
       echo ""
     ) >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/managers
     #   install default release information file
     release_tag=""
     release_url=""
     l_stack=""; [ ".%{?l_stack:set}"  = .set ] && l_stack="%{l_stack}"
     case "$l_stack" in
         http: | https: | ftp: | file: )
             release_url="$l_stack"
             ;;
         [a-zA-Z]* )
             release_tag="$l_stack"
             ;;
     esac
     ( echo "##"
       echo "##  release -- OpenPKG Release Information"
       echo "##"
       echo ""
       echo "TAG=$release_tag"
       echo "URL=$release_url"
       echo ""
     ) >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/release
     #   install overriding RPM configuration files
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rpmpopt` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmpopt
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         -e "s:@l_prefix_static@:%{l_prefix}:g" \
         -e "s;@l_build_path@;$l_build_path;g" \
         -e "s;@l_build_ldlp@;$l_build_ldlp;g" \
         -e "s;@l_build_ulim@;$l_build_ulim;g" \
         -e "s;@l_unprivileged@;$l_unprivileged;g" \
         -e "s:@TAG@:$tag:g" \
         -e "s:@SUSR@:$susr:g" \
         -e "s:@SGRP@:$sgrp:g" \
         -e "s:@MUSR@:$musr:g" \
         -e "s:@MGRP@:$mgrp:g" \
         -e "s:@RUSR@:$rusr:g" \
         -e "s:@RGRP@:$rgrp:g" \
         -e "s:@NUSR@:$nusr:g" \
         -e "s:@NGRP@:$ngrp:g" \
         <`SOURCE rpmmacros` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmmacros
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rpmlua` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmlua
     cp `SOURCE openpkg.org.pgp` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.org.pgp
     cp `SOURCE openpkg.com.pgp` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.com.pgp
     cp `SOURCE openpkg.net.pgp` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.net.pgp
     #   install license data
     test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d
     cp `SOURCE license-BOOT.txt` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/BOOT
     cp `SOURCE license-COMMUNITY.txt` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/COMMUNITY
     cp `SOURCE license-EVAL.txt` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/EVAL
     cp `SOURCE license-EXAMPLE.txt` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/EXAMPLE
     cp `SOURCE license-PROMO.txt` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/PROMO
     cp `SOURCE license-RECOVERY.txt` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/RECOVERY
     cp `SOURCE license.lua` \
        $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/license.lua
     touch $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license
     #   provide directories for easy overriding of RPM configuration files
     test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmmacros.d || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmmacros.d
     test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmpopt.d || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmpopt.d
     test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmlua.d || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmlua.d
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Done. Thank you for flying OpenPKG..."; set -x
 %files
     %defattr(-,%{?l_musr}%{!?l_musr:%{l_fsusr}},%{?l_mgrp}%{!?l_mgrp:%{l_fsgrp}})
     %{l_prefix}/README
     %config(noreplace) %{l_prefix}/.bashrc
     %config(noreplace) %{l_prefix}/.bash_login
     %dir %{l_prefix}/RPM
     %dir %{l_prefix}/RPM/SRC
     %dir %{l_prefix}/RPM/PKG
     %dir %{l_prefix}/RPM/TR
     %dir %{l_prefix}/RPM/DB
     %dir %{l_prefix}/RPM/TMP
     %dir %{l_prefix}/cgi
     %dir %{l_prefix}/bin
     %attr(4755,%{l_susr},%{l_mgrp}) %{l_prefix}/bin/openpkg
     %dir %{l_prefix}/etc
     %{l_prefix}/etc/rc
     %config(noreplace) %{l_prefix}/etc/rc.conf
     %{l_prefix}/etc/rc.func
     %dir %{l_prefix}/etc/rc.d
     %{l_prefix}/etc/rc.d/rc.openpkg
     %dir %{l_prefix}/etc/openpkg
     %ghost %{l_prefix}/etc/openpkg/license
     %dir %{l_prefix}/etc/openpkg/license.d
     %{l_prefix}/etc/openpkg/license.d/BOOT
     %{l_prefix}/etc/openpkg/license.d/COMMUNITY
     %{l_prefix}/etc/openpkg/license.d/EVAL
     %{l_prefix}/etc/openpkg/license.d/EXAMPLE
     %{l_prefix}/etc/openpkg/license.d/PROMO
     %{l_prefix}/etc/openpkg/license.d/RECOVERY
     %ghost %{l_prefix}/etc/openpkg/uuid
     %config %{l_prefix}/etc/openpkg/release
     %config %{l_prefix}/etc/openpkg/platform
     %config %{l_prefix}/etc/openpkg/rpmmacros
     %config %{l_prefix}/etc/openpkg/rpmpopt
     %config %{l_prefix}/etc/openpkg/rpmlua
     %dir %{l_prefix}/etc/openpkg/rpmmacros.d
     %dir %{l_prefix}/etc/openpkg/rpmpopt.d
     %dir %{l_prefix}/etc/openpkg/rpmlua.d
     %ghost %{l_prefix}/etc/openpkg/register.conf
     %ghost %{l_prefix}/etc/openpkg/register.prep
     %ghost %{l_prefix}/etc/openpkg/register.tran
     %ghost %{l_prefix}/etc/openpkg/register.util
     %config %attr(664,%{l_musr},%{l_mgrp}) %{l_prefix}/etc/openpkg/managers
     %{l_prefix}/etc/openpkg/openpkg.org.pgp
     %{l_prefix}/etc/openpkg/openpkg.com.pgp
     %{l_prefix}/etc/openpkg/openpkg.net.pgp
     %dir %{l_prefix}/include
     %dir %{l_prefix}/include/openpkg
     %dir %{l_prefix}/include/openpkg/rpm
     %{l_prefix}/include/openpkg/rpm/argv.h
     %{l_prefix}/include/openpkg/rpm/beecrypt.h
     %{l_prefix}/include/openpkg/rpm/bzlib.h
     %{l_prefix}/include/openpkg/rpm/db.h
     %{l_prefix}/include/openpkg/rpm/envvar.h
     %{l_prefix}/include/openpkg/rpm/fs.h
     %{l_prefix}/include/openpkg/rpm/fts.h
     %{l_prefix}/include/openpkg/rpm/glob.h
     %{l_prefix}/include/openpkg/rpm/mire.h
     %{l_prefix}/include/openpkg/rpm/misc.h
     %{l_prefix}/include/openpkg/rpm/pkgio.h
     %{l_prefix}/include/openpkg/rpm/popt.h
     %{l_prefix}/include/openpkg/rpm/rpm4compat.h
     %{l_prefix}/include/openpkg/rpm/rpmal.h
     %{l_prefix}/include/openpkg/rpm/rpmbc.h
     %{l_prefix}/include/openpkg/rpm/rpmbuild.h
     %{l_prefix}/include/openpkg/rpm/rpmcb.h
     %{l_prefix}/include/openpkg/rpm/rpmcli.h
     %{l_prefix}/include/openpkg/rpm/rpmconstant.h
     %{l_prefix}/include/openpkg/rpm/rpmdav.h
     %{l_prefix}/include/openpkg/rpm/rpmdb.h
     %{l_prefix}/include/openpkg/rpm/rpmds.h
     %{l_prefix}/include/openpkg/rpm/rpmevr.h
     %{l_prefix}/include/openpkg/rpm/rpmfc.h
     %{l_prefix}/include/openpkg/rpm/rpmfi.h
     %{l_prefix}/include/openpkg/rpm/rpmgc.h
     %{l_prefix}/include/openpkg/rpm/rpmgi.h
     %{l_prefix}/include/openpkg/rpm/rpmhash.h
     %{l_prefix}/include/openpkg/rpm/rpmio-stub.h
     %{l_prefix}/include/openpkg/rpm/rpmio.h
     %{l_prefix}/include/openpkg/rpm/rpmiotypes.h
     %{l_prefix}/include/openpkg/rpm/rpmku.h
     %{l_prefix}/include/openpkg/rpm/rpmlib.h
     %{l_prefix}/include/openpkg/rpm/rpmlog.h
     %{l_prefix}/include/openpkg/rpm/rpmmacro.h
     %{l_prefix}/include/openpkg/rpm/rpmmg.h
     %{l_prefix}/include/openpkg/rpm/rpmns.h
     %{l_prefix}/include/openpkg/rpm/rpmnss.h
     %{l_prefix}/include/openpkg/rpm/rpmpgp.h
     %{l_prefix}/include/openpkg/rpm/rpmps.h
     %{l_prefix}/include/openpkg/rpm/rpmspec.h
     %{l_prefix}/include/openpkg/rpm/rpmsq.h
     %{l_prefix}/include/openpkg/rpm/rpmssl.h
     %{l_prefix}/include/openpkg/rpm/rpmsw.h
     %{l_prefix}/include/openpkg/rpm/rpmsx.h
     %{l_prefix}/include/openpkg/rpm/rpmtag.h
     %{l_prefix}/include/openpkg/rpm/rpmte.h
     %{l_prefix}/include/openpkg/rpm/rpmts.h
     %{l_prefix}/include/openpkg/rpm/rpmurl.h
     %{l_prefix}/include/openpkg/rpm/rpmuuid.h
     %{l_prefix}/include/openpkg/rpm/rpmversion.h
     %{l_prefix}/include/openpkg/rpm/rpmwf.h
     %{l_prefix}/include/openpkg/rpm/rpmxar.h
     %{l_prefix}/include/openpkg/rpm/rpmzlog.h
     %{l_prefix}/include/openpkg/rpm/signature.h
     %{l_prefix}/include/openpkg/rpm/sqlite3.h
     %{l_prefix}/include/openpkg/rpm/ugid.h
     %{l_prefix}/include/openpkg/rpm/yarn.h
     %{l_prefix}/include/openpkg/rpm/zconf.h
     %{l_prefix}/include/openpkg/rpm/zlib.h
     %dir %{l_prefix}/info
     %dir %{l_prefix}/lib
     %dir %{l_prefix}/lib/openpkg
     %{l_prefix}/lib/openpkg/bash
     %{l_prefix}/lib/openpkg/bsdcpio
     %{l_prefix}/lib/openpkg/bsdtar
     %{l_prefix}/lib/openpkg/bzip2
     %{l_prefix}/lib/openpkg/curl
     %{l_prefix}/lib/openpkg/db_tool
     %{l_prefix}/lib/openpkg/cmp
     %{l_prefix}/lib/openpkg/diff
     %{l_prefix}/lib/openpkg/diff3
     %{l_prefix}/lib/openpkg/sdiff
     %{l_prefix}/lib/openpkg/gzip
     %{l_prefix}/lib/openpkg/librpm.a
     %{l_prefix}/lib/openpkg/librpmbeecrypt.a
     %{l_prefix}/lib/openpkg/librpmbuild.a
     %{l_prefix}/lib/openpkg/librpmbz2.a
     %{l_prefix}/lib/openpkg/librpmdb.a
     %{l_prefix}/lib/openpkg/librpmio.a
     %{l_prefix}/lib/openpkg/librpmmisc.a
     %{l_prefix}/lib/openpkg/librpmpopt.a
     %{l_prefix}/lib/openpkg/librpmsqlite3.a
     %{l_prefix}/lib/openpkg/librpmz.a
     %{l_prefix}/lib/openpkg/license.lua
     %{l_prefix}/lib/openpkg/miniperl
     %{l_prefix}/lib/openpkg/mutex
     %{l_prefix}/lib/openpkg/openpkg
     %{l_prefix}/lib/openpkg/openssl
     %{l_prefix}/lib/openpkg/patch
     %{l_prefix}/lib/openpkg/rc
     %{l_prefix}/lib/openpkg/rpm
     %{l_prefix}/lib/openpkg/rpm.pc
     %{l_prefix}/lib/openpkg/rpmdb
     %{l_prefix}/lib/openpkg/rpmdeps
     %{l_prefix}/lib/openpkg/lua
     %{l_prefix}/lib/openpkg/rpmmacros
     %{l_prefix}/lib/openpkg/rpmpopt
     %{l_prefix}/lib/openpkg/rpmtool
     %{l_prefix}/lib/openpkg/shtool
     %{l_prefix}/lib/openpkg/sqlite3
     %{l_prefix}/lib/openpkg/tar
     %{l_prefix}/lib/openpkg/uuid
     %{l_prefix}/lib/openpkg/xz
     %dir %{l_prefix}/libexec
     %dir %{l_prefix}/libexec/openpkg
     %{l_prefix}/libexec/openpkg/build.8
     %{l_prefix}/libexec/openpkg/build.pl
     %{l_prefix}/libexec/openpkg/curl.sh
     %{l_prefix}/libexec/openpkg/dev.8
     %{l_prefix}/libexec/openpkg/dev.pl
     %{l_prefix}/libexec/openpkg/index.8
     %{l_prefix}/libexec/openpkg/index.pl
     %{l_prefix}/libexec/openpkg/license
     %{l_prefix}/libexec/openpkg/license.8
     %{l_prefix}/libexec/openpkg/lsync
     %{l_prefix}/libexec/openpkg/lsync.8
     %{l_prefix}/libexec/openpkg/lint-fsl.pl
     %{l_prefix}/libexec/openpkg/lint-rc.pl
     %{l_prefix}/libexec/openpkg/lint-rpm.pl
     %{l_prefix}/libexec/openpkg/lint-spec.pl
     %{l_prefix}/libexec/openpkg/makeproxy.8
     %{l_prefix}/libexec/openpkg/makeproxy.pl
     %{l_prefix}/libexec/openpkg/man
     %{l_prefix}/libexec/openpkg/mirror.8
     %{l_prefix}/libexec/openpkg/mirror.pl
     %{l_prefix}/libexec/openpkg/rc
     %{l_prefix}/libexec/openpkg/rc.8
     %{l_prefix}/libexec/openpkg/register
     %{l_prefix}/libexec/openpkg/register.8
     %{l_prefix}/libexec/openpkg/release
     %{l_prefix}/libexec/openpkg/release.8
     %{l_prefix}/libexec/openpkg/rpm
     %{l_prefix}/libexec/openpkg/rpm-config
     %{l_prefix}/libexec/openpkg/rpm-config.8
     %{l_prefix}/libexec/openpkg/rpm.8
     %{l_prefix}/libexec/openpkg/rpmconstant
     %{l_prefix}/libexec/openpkg/rpmconstant.8
     %{l_prefix}/libexec/openpkg/rpm2cpio
     %{l_prefix}/libexec/openpkg/rpm2cpio.8
     %{l_prefix}/libexec/openpkg/rpmbuild.8
     %{l_prefix}/libexec/openpkg/rpmcache
     %{l_prefix}/libexec/openpkg/rpmcache.8
     %{l_prefix}/libexec/openpkg/rpmdeps.8
     %{l_prefix}/libexec/openpkg/rpmgraph.8
     %{l_prefix}/libexec/openpkg/rpmgrep
     %{l_prefix}/libexec/openpkg/rpmgrep.1
     %{l_prefix}/libexec/openpkg/sea.8
     %{l_prefix}/libexec/openpkg/sea.sh
     %{l_prefix}/libexec/openpkg/search.8
     %{l_prefix}/libexec/openpkg/search.pl
     %{l_prefix}/libexec/openpkg/stack.8
     %{l_prefix}/libexec/openpkg/stack.sh
     %{l_prefix}/libexec/openpkg/shtool.sh
     %{l_prefix}/libexec/openpkg/svs
     %{l_prefix}/libexec/openpkg/svs.1
     %{l_prefix}/libexec/openpkg/uuid
     %{l_prefix}/libexec/openpkg/uuid.8
     %dir %{l_prefix}/man
     %dir %{l_prefix}/man/man1
     %dir %{l_prefix}/man/man2
     %dir %{l_prefix}/man/man3
     %dir %{l_prefix}/man/man4
     %dir %{l_prefix}/man/man5
     %dir %{l_prefix}/man/man6
     %dir %{l_prefix}/man/man7
     %dir %{l_prefix}/man/man8
     %dir %{l_prefix}/man/man9
     %dir %{l_prefix}/man/cat1
     %dir %{l_prefix}/man/cat2
     %dir %{l_prefix}/man/cat3
     %dir %{l_prefix}/man/cat4
     %dir %{l_prefix}/man/cat5
     %dir %{l_prefix}/man/cat6
     %dir %{l_prefix}/man/cat7
     %dir %{l_prefix}/man/cat8
     %dir %{l_prefix}/man/cat9
     %{l_prefix}/man/man1/openpkg.1
     %dir %{l_prefix}/sbin
     %dir %{l_prefix}/pub
     %dir %{l_prefix}/share
     %dir %{l_prefix}/var
     %dir %{l_prefix}/local
     %{l_prefix}/local/README
     %{l_prefix}/local/.lsyncrc
     %dir %{l_prefix}/local/PKG
     %dir %{l_prefix}/local/bin
     %dir %{l_prefix}/local/etc
     %dir %{l_prefix}/local/include
     %dir %{l_prefix}/local/info
     %dir %{l_prefix}/local/lib
     %dir %{l_prefix}/local/man
     %dir %{l_prefix}/local/man/man1
     %dir %{l_prefix}/local/man/man2
     %dir %{l_prefix}/local/man/man3
     %dir %{l_prefix}/local/man/man4
     %dir %{l_prefix}/local/man/man5
     %dir %{l_prefix}/local/man/man6
     %dir %{l_prefix}/local/man/man7
     %dir %{l_prefix}/local/man/man8
     %dir %{l_prefix}/local/man/man9
     %dir %{l_prefix}/local/man/cat1
     %dir %{l_prefix}/local/man/cat2
     %dir %{l_prefix}/local/man/cat3
     %dir %{l_prefix}/local/man/cat4
     %dir %{l_prefix}/local/man/cat5
     %dir %{l_prefix}/local/man/cat6
     %dir %{l_prefix}/local/man/cat7
     %dir %{l_prefix}/local/man/cat8
     %dir %{l_prefix}/local/man/cat9
     %dir %{l_prefix}/local/sbin
 %clean
     #   skip in bootstrap phase 2 (see openpkg.boot)
     [ ".$OPENPKG_BOOT" = .1 ] && exit 0
     #   cleanup build area
     rm -rf openpkg-%{version} >/dev/null 2>&1 || true
     #   cleanup installation area
     rm -rf $RPM_BUILD_ROOT >/dev/null 2>&1 || true
 %pre
     #   always performed for upgrades and because it doesn't harm!
     #   [ ".$1" != .1 ] && exit 0
     #   this procedure is only usable with root privileges
     #   (for nonroot installations it is not required at all)
     cusr=`(id -un) 2>/dev/null ||\
           (id | sed -e 's;^[^(]*(\([^)]*\)).*;\1;') 2>/dev/null ||\
           (whoami) 2>/dev/null ||\
           (who am i | cut "-d " -f1) 2>/dev/null ||\
           echo $LOGNAME`
     #   determine runtime details (for both inside and outside RPM!!)
     #   - bootstrapping: $xxx is set from etc.wrapbin.sh
     #   - upgrading new: %{l_[smrn]{usr,grp}} is set via rpmmacros
     #   - upgrading old: %{l_[smrn]{usr,grp}} is not set at all
     [ ".$susr" = . ] && susr="%{?l_susr}%{!?l_susr:root}"
     [ ".$sgrp" = . ] && sgrp="%{?l_sgrp}%{!?l_sgrp:wheel}"
     [ ".$musr" = . ] && musr="%{?l_musr}%{!?l_musr:%{l_fsusr}}"
     [ ".$mgrp" = . ] && mgrp="%{?l_mgrp}%{!?l_mgrp:%{l_fsgrp}}"
     [ ".$rusr" = . ] && rusr="%{?l_rusr}%{!?l_rusr:%{l_fsusr}-r}"
     [ ".$rgrp" = . ] && rgrp="%{?l_rgrp}%{!?l_rgrp:%{l_fsgrp}-r}"
     [ ".$nusr" = . ] && nusr="%{?l_nusr}%{!?l_nusr:%{l_fsusr}-n}"
     [ ".$ngrp" = . ] && ngrp="%{?l_ngrp}%{!?l_ngrp:%{l_fsgrp}-n}"
     [ ".$suid" = . ] && suid="%{?l_suid}"
     [ ".$sgid" = . ] && sgid="%{?l_sgid}"
     [ ".$muid" = . ] && muid="%{?l_muid}"
     [ ".$mgid" = . ] && mgid="%{?l_mgid}"
     [ ".$ruid" = . ] && ruid="%{?l_ruid}"
     [ ".$rgid" = . ] && rgid="%{?l_rgid}"
     [ ".$nuid" = . ] && nuid="%{?l_nuid}"
     [ ".$ngid" = . ] && ngid="%{?l_ngid}"
     #   if any of these optional params are not used we won't have a
     #   corresponding macro either, so make use of one conditionally
     [ ".$suid" = . ] && [ ".%{?l_suid:set}" = .set ] && suid="%{?l_suid}"
     [ ".$sgid" = . ] && [ ".%{?l_sgid:set}" = .set ] && sgid="%{?l_sgid}"
     [ ".$muid" = . ] && [ ".%{?l_muid:set}" = .set ] && muid="%{?l_muid}"
     [ ".$mgid" = . ] && [ ".%{?l_mgid:set}" = .set ] && mgid="%{?l_mgid}"
     [ ".$ruid" = . ] && [ ".%{?l_ruid:set}" = .set ] && ruid="%{?l_ruid}"
     [ ".$rgid" = . ] && [ ".%{?l_rgid:set}" = .set ] && rgid="%{?l_rgid}"
     [ ".$nuid" = . ] && [ ".%{?l_nuid:set}" = .set ] && nuid="%{?l_nuid}"
     [ ".$ngid" = . ] && [ ".%{?l_ngid:set}" = .set ] && ngid="%{?l_ngid}"
     #   determine prefix
     [ ".$prefix" = . ] && prefix="%{l_prefix}"
     prefix=`echo "$prefix" | sed -e 's;//*;/;g' -e 's;/$;;'`
     #   Preflight check before update to make sure that the currently
     #   activated license is still valid. This is done just be friendly
     #   to people and to not too easily shoot theirself into the foot
     #   by blindly upgrading and then having to recognize that the new
     #   OpenPKG Framework is no longer covered by the old license.
     if [ ".$1" = .2 ]; then
         ( OPENPKG_FRAMEWORK_RELEASE="%{release}"
           export OPENPKG_FRAMEWORK_RELEASE
           #   LATER:
           #   $prefix/bin/openpkg rpm -q openpkg >/dev/null 2>&1 || exit $?
           #   if [ $? -ne 0 ]; then
           #   NOW:
           output="`$prefix/bin/openpkg rpm -q openpkg 2>&1 | grep 'ENVIRONMENT ANOMALY'`"
           if [ ".$output" != . ]; then
               id="`($prefix/bin/openpkg license active) 2>/dev/null`"
               [ ".$id" = . ] && id="UNKNOWN"
               ( echo "Attention, your currently active license \"$id\" does"
                 echo "not allow you to use this newer version of the OpenPKG Framework!"
                 echo "We cancel this update to prevent you from a runtime failure."
                 echo "Please first upgrade to a newer license with the command:"
                 echo "  \$ $prefix/bin/openpkg license update $id <file>"
               ) | $prefix/lib/openpkg/rpmtool msg -b -t error
               exit 42
           fi
         ) || exit $?
     fi
     #   register instance in presence file
     presence="/etc/openpkg"
     exists=`cat $presence 2>/dev/null | egrep "^ *${prefix} *\$"`
     if [ ".$exists" = . ]; then
         ( umask 022
           echo "${prefix}" >>$presence
         ) 2>/dev/null || true
     fi
     #   determine user/group ids
     for class in s m r n; do
         eval "xusr=\"\$${class}usr\""
         eval "xgrp=\"\$${class}grp\""
         eval "xuid=\"\$${class}uid\""
         eval "xgid=\"\$${class}gid\""
         if [ ".$xuid" = . ]; then
             case "$plid" in
                 Darwin/10.[1-9]* | Darwin/1[1-9].* )
                     xuid=`dscl . -read "/users/${xusr}" UniqueID 2>/dev/null | awk '{ print $2; }'`
                     ;;
                 * )
                     xuid=`(getent passwd "${xusr}"; \
                         grep "^${xusr}:" /etc/passwd; \
                         ypmatch "${xusr}" passwd; \
                         nismatch "${xusr}" passwd; \
                         nidump passwd . | grep "^${xusr}:") 2>/dev/null | \
                         sed -e 'q' | awk -F: '{ print $3; }'`
                     ;;
             esac
             if [ ".$xuid" = . ]; then
                 #   seek for a reasonably uid/gid pair
                 xuid=1000
                 ok=0
                 while [ ".$ok" = .0 ]; do
                     eval "u_exists=\$u_exists_$xuid"
                     if [ ".$u_exists" = . ]; then
                         case "$plid" in
                             Darwin/10.[1-9]* | Darwin/1[1-9].* )
                                 u_exists=`dscl . -search /users UniqueID "$xuid" 2>/dev/null`
                                 ;;
                             * )
                                 u_exists=`(getent passwd; cat /etc/passwd; ypcat passwd; niscat passwd; nidump passwd .) 2>/dev/null |\
                                           grep "^[^:]*:[^:]*:$xuid:"`
                                 ;;
                         esac
                     fi
                     eval "g_exists=\$g_exists_$xuid"
                     if [ ".$g_exists" = . ]; then
                         case "$plid" in
                             Darwin/10.[1-9]* | Darwin/1[1-9].* )
                                 g_exists=`dscl . -search /groups PrimaryGroupID "$xuid" 2>/dev/null`
                                 ;;
                             * )
                                 g_exists=`(getent group; cat /etc/group; ypcat group; niscat group; nidump group .) 2>/dev/null |\
                                           grep "^[^:]*:[^:]*:$xuid:"`
                         esac
                     fi
                     if [ ".$u_exists" = . -a ".$g_exists" = . ]; then
                         ok=1
                         break
                     fi
                     xuid=`expr $xuid + 1`
                 done
                 eval "u_exists_$xuid=yes"
                 eval "g_exists_$xuid=yes"
             fi
         fi
         if [ ".$xgid" = . ]; then
             xgid=`(getent group "${xgrp}"; \
                   grep "^${xgrp}:" /etc/group; \
                   ypmatch "${xgrp}" group; \
                   nismatch "${xgrp}" group; \
                   nidump group . | grep "^${xgrp}:"; \
                   dscl . -read "/groups/${xgrp}" | grep RecordName) 2>/dev/null | \
                   sed -e 'q' | awk -F: '{ print $3; }'`
             if [ ".$xgid" = . ]; then
                 xgid="$xuid"
             fi
         fi
         eval "${class}uid=\"$xuid\""
         eval "${class}gid=\"$xgid\""
     done
     #   determine platform id
     s=`(uname -s) 2>/dev/null` || s='Unknown'
     r=`(uname -r) 2>/dev/null` || r='0.0'
     plid="${s}/${r}"
     #   add entry to /etc/shells
     shell="${prefix}/lib/openpkg/bash"
     if [ -f /etc/shells ]; then
         exists=`cat /etc/shells 2>/dev/null | grep "^$shell"`
         if [ ".$exists" = . ]; then
             if [ ".$cusr" != ".root" ]; then
                 echo "openpkg:WARNING: skipping addition of $shell to /etc/shells" 1>&2
                 echo "openpkg:WARNING: (would require root privileges)" 1>&2
             else
                 echo "${shell}" >>/etc/shells
             fi
         fi
     fi
     #   clear pending deferred actions
     rm -f %{l_prefix}.pre-group-process.sh %{l_prefix}.pre-post-process.sh >/dev/null 2>&1
     #   create the hierarchy user/group
     for req in "superuser:${susr}:${suid}:${sgrp}:${sgid}" \
                "management:${musr}:${muid}:${mgrp}:${mgid}" \
                "restricted:${rusr}:${ruid}:${rgrp}:${rgid}" \
                "nonprivileged:${nusr}:${nuid}:${ngrp}:${ngid}"; do
         #   split request into class/usr/uid/grp/gid
         OIFS="$IFS"; IFS=":"; set -- $req; IFS="$OIFS"
         class="$1"; usr="$2"; uid="$3"; grp="$4"; gid="$5"
         #   check whether user already exists
         exists=`(getent passwd "$usr"; \
                  grep "^$usr:" /etc/passwd; \
                  ypmatch "$usr" passwd; \
                  nismatch "$usr" passwd; \
                  nidump passwd . | grep "^$usr:"; \
                  dscl . -read "/users/$usr" | grep RecordName) 2>/dev/null | \
                  sed -e 'q'`
         if [ ".$exists" = . ]; then
             if [ ".$cusr" != ".root" ]; then
                 echo "openpkg:WARNING: skipping creation of OpenPKG $class user $usr" 1>&2
                 echo "openpkg:WARNING: (would require root privileges)" 1>&2
             else
                 #   add entry to passwd database
                 realname="${prefix} OpenPKG ($class)"
                 case "$plid" in
                     FreeBSD/* | NetBSD/* )
                         file=/etc/master.passwd
                         entry="${usr}:*:${uid}:${gid}::0:0:${realname}:${prefix}:${shell}"
                         update="(PATH=\$PATH:/usr/sbin; pwd_mkdb -p /etc/master.passwd)"
                         ;;
                     Linux/* )
                         file=/etc/passwd
                         entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
                         update="(PATH=\$PATH:/usr/sbin; pwconv)"
                         ;;
                     SunOS/5.* | UnixWare/* )
                         file=/etc/passwd
                         entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
                         update="(PATH=\$PATH:/usr/sbin; pwconv)"
                         ;;
                     AIX/* )
                         #   intentionally do nothing here
                         :
                         ;;
                     OSF1/V5.* )
                         file=/etc/passwd
                         entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
                         update="(PATH=\$PATH:/usr/sbin; mkpasswd /etc/passwd)"
                         ;;
                     HP-UX/* )
                         file=/etc/passwd
                         entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
                         update=":"
                         ;;
                     Darwin/* )
                         #   intentionally do nothing here
                         :
                         ;;
                     IRIX*/6.* )
                         file=/etc/passwd
                         entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
                         if   [ -f /etc/shadow ]
                         then update="(PATH=\$PATH:/sbin; pwconv)"
                         else update=":"
                         fi
                         ;;
                     CYGWIN*/* )
                         file=/etc/passwd
                         entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
                         update=":"
                         ;;
                 esac
                 case "$plid" in
                     Darwin/10.[1-9]* | Darwin/1[1-9].* )
                         dscl . -create "/users/${usr}"
                         dscl . -create "/users/${usr}" Password         "*"
                         dscl . -create "/users/${usr}" UniqueID         "${uid}"
                         dscl . -create "/users/${usr}" PrimaryGroupID   "${gid}"
                         dscl . -create "/users/${usr}" RealName         "${realname}"
                         dscl . -create "/users/${usr}" NFSHomeDirectory "${prefix}"
                         dscl . -create "/users/${usr}" UserShell        "${shell}"
                         ;;
                     Darwin/* )
                         niutil -create     . "/users/${usr}"
                         niutil -createprop . "/users/${usr}" passwd   "*"
                         niutil -createprop . "/users/${usr}" uid      "${uid}"
                         niutil -createprop . "/users/${usr}" gid      "${gid}"
                         niutil -createprop . "/users/${usr}" realname "${realname}"
                         niutil -createprop . "/users/${usr}" home     "${prefix}"
                         niutil -createprop . "/users/${usr}" shell    "${shell}"
                         ;;
                     AIX/* )
                         mkuser id="${uid}" gecos="${realname}" home="${prefix}" "${usr}"
                         cp /etc/security/login.cfg /etc/security/login.cfg.bak && \
                         sed -e "/^usw:/,/^[^ ]/s;\\( *shells =.*\\) *\$;\\1,$shell;" \
                             </etc/security/login.cfg.bak >/etc/security/login.cfg && \
                         rm -f /etc/security/login.cfg.bak >/dev/null 2>&1
                         #   defer both the setting of the primary group and the shell,
                         #   as they do not exist at this stage of processing.
                         echo "chuser pgrp=\"${grp}\" \"${usr}\"" >>%{l_prefix}.pre-group-process.sh
                         echo "chuser shell=\"${shell}\" \"${usr}\"" >>%{l_prefix}.pre-post-process.sh
                         ;;
                     * )
                         cp $file $file.bak && \
                         (grep -v '^+:' $file.bak; echo $entry; grep '^+:' $file.bak) >$file
                         rm -f $file.bak >/dev/null 2>&1
                         eval $update
                         [ $? -ne 0 ] && exit $?
                         ;;
                 esac
             fi
         fi
         #   check whether group already exists
         exists=`(getent group "$grp"; \
                 grep "^$grp:" /etc/group; \
                 ypmatch "$grp" group; \
                 nismatch "$grp" group; \
                 nidump group . | grep "^$grp:"; \
                 dscl . -read "/groups/$grp" | grep RecordName) 2>/dev/null | \
                 sed -e 'q'`
         if [ ".$exists" = . ]; then
             if [ ".$cusr" != ".root" ]; then
                 echo "openpkg:WARNING: skipping creation of OpenPKG $class group $grp" 1>&2
                 echo "openpkg:WARNING: (would require root privileges)" 1>&2
             else
                 case "$plid" in
                     Darwin/10.[1-9]* | Darwin/1[1-9].* )
                         dscl . -create "/groups/${grp}"
                         dscl . -create "/groups/${grp}" Password        "*"
                         dscl . -create "/groups/${grp}" PrimaryGroupID  "${gid}"
                         dscl . -create "/groups/${grp}" GroupMembership "${usr}"
                         ;;
                     Darwin/* )
                         niutil -create     . "/groups/${grp}"
                         niutil -createprop . "/groups/${grp}" gid   "${gid}"
                         niutil -createprop . "/groups/${grp}" users "${usr}"
                         ;;
                     AIX/* )
                         mkgroup id="${gid}" users="${usr}" "${grp}"
                         ;;
                     * )
                         #   add entry to group database
                         file=/etc/group
                         entry="${grp}:*:${gid}:${usr}"
                         cp $file $file.bak && \
                         (grep -v '^+:' $file.bak; echo $entry; grep '^+:' $file.bak) >$file
                         rm -f $file.bak >/dev/null 2>&1
                     ;;
                 esac
             fi
         fi
     done
     #   optional group processing (deferred adjustment of primary group)
     if [ -f %{l_prefix}.pre-group-process.sh ]; then
         sh %{l_prefix}.pre-group-process.sh
         rm -f %{l_prefix}.pre-group-process.sh
     fi
     #   invalidate passwd and group tables from Name Service Cache Daemon to
     #   ensure chown/chgrp works immediately after pwconv on Linux and Solaris
     if [ -x /usr/sbin/nscd ]; then
         /usr/sbin/nscd -i passwd >/dev/null 2>&1 || true
         /usr/sbin/nscd -i group  >/dev/null 2>&1 || true
     fi
     #   create the startup/shutdown transfer script
     name_old="`echo "$prefix" | sed -e 's;/;;g'`"
     name="openpkg-`echo "$prefix" | sed -e 's;[^a-zA-Z0-9];;g'`"
     if [ ".$cusr" != ".root" ]; then
         echo "openpkg:WARNING: skipping creation of system runcommand hooks" 1>&2
         echo "openpkg:WARNING: (would require root privileges)" 1>&2
     else
         case "$plid" in
             FreeBSD/* )
                 if [ -f /etc/rc.d/${name_old} ]; then
                     rm -f /etc/rc.d/${name_old}
                 fi
                 if [ ! -f /etc/rc.d/${name} ]; then
                     #   install transfer script
                     rm -f /etc/rc.d/${name} >/dev/null 2>&1
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "# PROVIDE: ${name}"
                       echo "# REQUIRE: LOGIN"
                       echo "# KEYWORD: shutdown"
                       echo ""
                       echo ". /etc/rc.subr"
                       echo ""
                       echo "name=\"openpkg_${name}\""
                       echo "start_cmd=\"openpkg_rc_all start\""
                       echo "stop_cmd=\"openpkg_rc_all stop\""
                       echo "restart_cmd=\"openpkg_rc_all stop start\""
                       echo ""
                       echo "openpkg_rc_all () {"
                       echo "    if [ -f ${prefix}/bin/openpkg ]; then"
                       echo "        ${prefix}/bin/openpkg rc all \"\$@\""
                       echo "    fi"
                       echo "}"
                       echo ""
                       echo "load_rc_config \$name"
                       echo "run_rc_command \"\$1\""
                       echo ""
                     ) >/etc/rc.d/${name}
                     chmod 755 /etc/rc.d/${name}
                 fi
                 ;;
             NetBSD/* )
                 if [ -f /etc/rc.d/${name_old} ]; then
                     rm -f /etc/rc.d/${name_old}
                 fi
                 if [ ! -f /etc/rc.d/${name} ]; then
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo "##  PROVIDE: ${name}"
                       echo "##  REQUIRE: DAEMON LOGIN NETWORK SERVERS"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
                       echo "case \$1 in"
                       echo "    start   ) exec ${prefix}/bin/openpkg rc all start ;;"
                       echo "    stop    ) exec ${prefix}/bin/openpkg rc all stop  ;;"
                       echo "    restart ) exec ${prefix}/bin/openpkg rc all stop start ;;"
                       echo "    status  ) ;;"
                       echo "esac"
                     ) >/etc/rc.d/${name}
                     chmod 755 /etc/rc.d/${name}
                 fi
                 ;;
             Linux/* )
                 if [ -f /etc/gentoo-release ]; then
                     if [ -f /etc/init.d/${name_old} ]; then
                         rm -f /etc/init.d/${name_old}
                     fi
                     if [ ! -f /etc/init.d/${name} ]; then
                         #   install transfer script
                         ( echo "#!/sbin/runscript"
                           echo "##"
                           echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                           echo "##"
                           echo ""
                           echo "depend() {"
                           echo "    after *"
                           echo "}"
                           echo ""
                           echo "checkconfig() {"
                           echo "    [ -f ${prefix}/bin/openpkg ] || return 1"
                           echo "    case $1 in"
                           echo "        start ) exec ${prefix}/bin/openpkg rc all start ;;"
                           echo "        stop  ) exec ${prefix}/bin/openpkg rc all stop  ;;"
                           echo "    esac"
                           echo "}"
                           echo ""
                           echo "start() {"
                           echo "    checkconfig || return 1"
                           echo "    ebegin "Starting OpenPKG ${prefix} hierarchy""
                           echo "    exec ${prefix}/bin/openpkg rc all start"
                           echo "    eend 0"
                           echo "}"
                           echo ""
                           echo "stop() {"
                           echo "    checkconfig || return 1"
                           echo "    ebegin "Stopping OpenPKG ${prefix} hierarchy""
                           echo "    exec ${prefix}/bin/openpkg rc all stop"
                           echo "    eend 0"
                           echo "}"
                         ) >/etc/init.d/${name}
                         chmod 755 /etc/init.d/${name}
                         /sbin/rc-update add ${name} default
                     fi
                 elif [ -f /etc/redhat-release ]; then
                     sroot=/etc/rc.d/init.d
                     if [ ! -f $sroot/${name} ]; then
                         #   install transfer script
                         ( echo "#!/bin/sh"
                           echo "##"
                           echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                           echo "##"
                           echo ""
                           echo "# chkconfig: 2345 99 00"
                           echo "# description: OpenPKG ${prefix}"
                           echo ""
                           echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
                           echo "case \$1 in"
                           echo "    start ) exec ${prefix}/bin/openpkg rc all start ;;"
                           echo "    stop  ) exec ${prefix}/bin/openpkg rc all stop  ;;"
                           echo "esac"
                         ) >$sroot/${name}
                         chmod 755 $sroot/${name}
                         #   activate script
                         /sbin/chkconfig --add ${name}
                         /sbin/chkconfig ${name} on
                     fi
                 else
                     #   sroot: script root directory
                     #   lroot: link   root directory
                     if [ -f /etc/debian_version ]; then
                         sroot=/etc/init.d
                         lroot=/etc/rc%%d.d
                     elif [ -f /etc/mandrake-release ]; then
                         sroot=/etc/rc.d/init.d
                         lroot=/etc/rc.d/rc%%d.d
                     elif [ -f /etc/SuSE-release ]; then
                         sroot=/etc/init.d
                         lroot=/etc/init.d/rc%%d.d
                     elif [ -f /etc/slackware-version ]; then
                         sroot=/etc/rc.d
                         lroot=/etc/rc.d/rc%%d.d
                         name="rc.${name}"
                         for i in 0 1 2 3 4 5 6; do
                             l=`echo $lroot | sed -e "s;%%d;$i;"`
                             if [ ! -d $l ]; then
                                 mkdir $l 2>&1 || true
                             fi
                         done
                     else
                         echo "WARNING: you are not running one of the supported standard" 1>&2
                         echo "WARNING: Linux platforms (Debian, RedHat, Mandrake, SuSE, Gentoo)."   1>&2
                         echo "WARNING: Guessing the location of the system init scripts!" 1>&2
                         sroot=""
                         lroot=""
                         for sr in /etc/rc.d/init.d /etc/init.d /sbin/init.d; do
                             if [ -d $sr ]; then
                                 sroot="$sr"
                                 break
                             fi
                         done
                         for lr in /etc/rc.d/rc2.d /etc/rc2.d /sbin/init.d/rc2.d; do
                             if [ -d $lr ]; then
                                 lroot="`echo $lr | sed -e 's;2;%%d;'`"
                                 break
                             fi
                         done
                         if [ ".$sroot" = . -o ".$lroot" = . ]; then
                             echo "ERROR: Failed to guess the location of the system init scripts!" 1>&2
                             exit 1
                         fi
                     fi
                     if [ -f $sroot/${name_old} ]; then
                         rm -f $sroot/${name_old}
                     fi
                     if [ ! -f $sroot/${name} ]; then
                         #   install transfer script
                         ( echo "#!/bin/sh"
                           echo "##"
                           echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                           echo "##"
                           echo ""
                           echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
                           echo "case \$1 in"
                           echo "    start ) exec ${prefix}/bin/openpkg rc all start ;;"
                           echo "    stop  ) exec ${prefix}/bin/openpkg rc all stop  ;;"
                           echo "esac"
                         ) >$sroot/${name}
                         chmod 755 $sroot/${name}
                         #   create corresponding symbolic links
                         for i in 2 3 4 5; do
                             ln -s $sroot/${name} `echo $lroot | sed -e "s;%%d;$i;"`/S99${name}
                         done
                         for i in 0 1 6; do
                             ln -s $sroot/${name} `echo $lroot | sed -e "s;%%d;$i;"`/K00${name}
                         done
                     fi
                 fi
                 ;;
             SunOS/5.1* )
                 suname="`echo "$prefix" | sed -e 's;[^a-zA-Z0-9];;g'`"
                 svcdir=/`[ -d /lib/svc/manifest ] && echo lib || echo var`
                 if [ ! -d /${svcdir}/svc/manifest/openpkg ]; then
                     mkdir /${svcdir}/svc/manifest/openpkg
                 fi
                 if [ ! -f /${svcdir}/svc/manifest/openpkg/${suname}.xml ]; then
                     #   install SMF manifest
                     ( echo "<?xml version=\"1.0\"?>"
                       echo "<!DOCTYPE service_bundle SYSTEM \"/usr/share/lib/xml/dtd/service_bundle.dtd.1\">"
                       echo "<service_bundle type='manifest' name='OpenPKG:${suname}'>"
                       echo "    <service"
                       echo "        name='openpkg/${suname}'"
                       echo "        type='service'"
                       echo "        version='1'>"
                       echo "        <create_default_instance enabled='false' />"
                       echo "        <single_instance />"
                       echo "        <dependency"
                       echo "            name='filesystem'"
                       echo "            type='service'"
                       echo "            grouping='require_all'"
                       echo "            restart_on='none'>"
                       echo "            <service_fmri value='svc:/system/filesystem/local' />"
                       echo "        </dependency>"
                       echo "        <dependency"
                       echo "            name='name-services'"
                       echo "            type='service'"
                       echo "            grouping='require_all'"
                       echo "            restart_on='none'>"
                       echo "            <service_fmri value='svc:/milestone/name-services' />"
                       echo "        </dependency>"
                       echo "        <dependency"
                       echo "            name='multi-user-server'"
                       echo "            type='service'"
                       echo "            grouping='require_all'"
                       echo "            restart_on='none'>"
                       echo "            <service_fmri value='svc:/milestone/multi-user-server' />"
                       echo "        </dependency>"
                       echo "        <dependency"
                       echo "            name='network'"
                       echo "            type='service'"
                       echo "            grouping='require_all'"
                       echo "            restart_on='none'>"
                       echo "            <service_fmri value='svc:/milestone/network' />"
                       echo "        </dependency>"
                       echo "        <exec_method"
                       echo "            type='method'"
                       echo "            name='start'"
                       echo "            exec='${prefix}/etc/rc all start'"
                       echo "            timeout_seconds='180'>"
                       echo "            <method_context>"
                       echo "                <method_credential user='root' group='root' />"
                       echo "            </method_context>"
                       echo "        </exec_method>"
                       echo "        <exec_method"
                       echo "            type='method'"
                       echo "            name='refresh'"
                       echo "            exec='${prefix}/etc/rc all restart'"
                       echo "            timeout_seconds='270'>"
                       echo "            <method_context>"
                       echo "                <method_credential user='root' group='root' />"
                       echo "            </method_context>"
                       echo "        </exec_method>"
                       echo "        <exec_method"
                       echo "            type='method'"
                       echo "            name='stop'"
                       echo "            exec='${prefix}/etc/rc all stop'"
                       echo "            timeout_seconds='180'>"
                       echo "        </exec_method>"
                       echo "        <property_group name='startd' type='framework'>"
                       echo "            <propval"
                       echo "                name='ignore_error'"
                       echo "                type='astring'"
                       echo "                value='core,signal' />"
                       echo "        </property_group>"
                       echo "        <property_group name='startd' type='framework'>"
                       echo "            <propval"
                       echo "                name='duration'"
                       echo "                type='astring'"
                       echo "                value='transient' />"
                       echo "        </property_group>"
                       echo "        <property_group name='general' type='framework'>"
                       echo "            <propval"
                       echo "                name='action_authorization'"
                       echo "                type='astring'"
                       echo "                value='solaris.smf.manage.openpkg.${suname}' />"
                       echo "        </property_group>"
                       echo "        <stability value='Unstable' />"
                       echo "        <template>"
                       echo "            <common_name>"
                       echo "                <loctext xml:lang='C'>OpenPKG Instance ${prefix}</loctext>"
                       echo "            </common_name>"
                       echo "        </template>"
                       echo "    </service>"
                       echo "</service_bundle>"
                     ) >/${svcdir}/svc/manifest/openpkg/${suname}.xml
                     /usr/sbin/svcadm restart svc:/system/manifest-import
                     ( echo "/usr/sbin/svcadm enable svc:/openpkg/${suname}:default"
                     ) >%{l_prefix}.pre-post-process.sh
                 fi
                 ;;
             SunOS/5.* )
                 if [ -f /etc/init.d/${name_old} ]; then
                     rm -f /etc/init.d/${name_old}
                 fi
                 if [ ! -f /etc/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/bin/openpkg rc all start ;;"
                       echo "    stop  ) exec ${prefix}/bin/openpkg rc all stop  ;;"
                       echo "esac"
                     ) >/etc/init.d/${name}
                     chmod 755 /etc/init.d/${name}
                     #   create corresponding symbolic links
                     ( cd /etc
                       ln init.d/${name} rc3.d/S99${name}
                       ln init.d/${name} rc0.d/K00${name}
                       ln init.d/${name} rc1.d/K00${name}
                     ) || exit $?
                 fi
                 ;;
             UnixWare/* )
                 if [ -f /etc/init.d/${name_old} ]; then
                     rm -f /etc/init.d/${name_old}
                 fi
                 if [ ! -f /etc/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/bin/openpkg rc all start ;;"
                       echo "    stop  ) exec ${prefix}/bin/openpkg rc all stop  ;;"
                       echo "esac"
                     ) >/etc/init.d/${name}
                     chmod 755 /etc/init.d/${name}
                     #   create corresponding symbolic links
                     ( cd /etc
                       ln init.d/${name} rc2.d/S99${name}
                       ln init.d/${name} rc0.d/K00${name}
                       ln init.d/${name} rc1.d/K00${name}
                     ) || exit $?
                 fi
                 ;;
             AIX/* )
                 if [ -f /etc/rc.d/init.d/${name_old} ]; then
                     rm -f /etc/rc.d/init.d/${name_old}
                 fi
                 if [ ! -f /etc/rc.d/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/bin/openpkg rc all start ;;"
                       echo "    stop  ) exec ${prefix}/bin/openpkg rc all stop  ;;"
                       echo "esac"
                     ) >/etc/rc.d/init.d/${name}
                     chmod 755 /etc/rc.d/init.d/${name}
                     #   create corresponding symbolic links
                     ( cd /etc/rc.d
                       ln -s ../init.d/${name} rc2.d/S99${name}
                     ) || exit $?
                 fi
                 ;;
             OSF1/V5.* )
                 if [ -f /sbin/init.d/${name_old} ]; then
                     rm -f /sbin/init.d/${name_old}
                 fi
                 if [ ! -f /sbin/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/bin/openpkg rc all start ;;"
                       echo "    stop  ) exec ${prefix}/bin/openpkg rc all stop  ;;"
                       echo "esac"
                     ) >/sbin/init.d/${name}
                     chmod 755 /sbin/init.d/${name}
                     #   create corresponding symbolic links
                     ( cd /sbin
                       ln -s ../init.d/${name} rc3.d/S99${name}
                       ln -s ../init.d/${name} rc0.d/K00${name}
                     ) || exit $?
                 fi
                 ;;
             HP-UX/* )
                 if [ -f /sbin/init.d/${name_old} ]; then
                     rm -f /sbin/init.d/${name_old}
                 fi
                 if [ ! -f /sbin/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/bin/openpkg rc all start ;;"
                       echo "    stop  ) exec ${prefix}/bin/openpkg rc all stop  ;;"
                       echo "esac"
                     ) >/sbin/init.d/${name}
                     chmod 755 /sbin/init.d/${name}
                     #   create corresponding symbolic links
                     ( cd /sbin
                       ln -s ../init.d/${name} rc2.d/S900${name}
                       ln -s ../init.d/${name} rc1.d/K100${name}
                     ) || exit $?
                 fi
                 ;;
             Darwin/* )
                 if [ -d /Library/StartupItems/${name_old} ]; then
                     rm -rf /Library/StartupItems/${name_old}
                 fi
                 darwin_rc_dir="/Library/StartupItems/${name}"
                 if [ ! -d ${darwin_rc_dir} ]; then
                     mkdir -p ${darwin_rc_dir}
                 fi
                 #   make sure hierarchy is activated in /etc/hostconfig
                 #   FIXME: cs: simple and bad code here without any detection of existing entries
                 darwin_rc_var="`echo ${name} | sed -e 's;-;_;g' | tr '[a-z]' '[A-Z]'`"
                 echo "${darwin_rc_var}=-YES-" >>/etc/hostconfig
                 #   install transfer script
                 if [ ! -f ${darwin_rc_dir}/${name} ]; then
                     rm -f ${darwin_rc_dir}/${name} >/dev/null 2>&1
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${darwin_rc_dir}/${name}"
                       echo "##  -- startup transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
                       echo ""
                       echo ". /etc/rc.common"
                       echo ""
                       echo "if [ \"\${${darwin_rc_var}:=-NO-}\" = \"-YES-\" ]; then"
                       echo "    ConsoleMessage \"OpenPKG ${prefix} hierarchy\""
                       echo "    ${prefix}/bin/openpkg rc all start"
                       echo "fi"
                     ) >${darwin_rc_dir}/${name}
                     chmod 755 ${darwin_rc_dir}/${name}
                 fi
                 #   install startup parameter list
                 if [ ! -f ${darwin_rc_dir}/StartupParameters.plist ]; then
                     rm -f ${darwin_rc_dir}/StartupParameters.plist >/dev/null 2>&1
                     ( echo "{"
                       echo "  Description     = \"OpenPKG ${prefix} hierarchy\";"
                       echo "  Provides        = (\"OpenPKG ${prefix}\");"
                       echo "  Requires        = (\"Disks\", \"Network Configuration\", \"Resolver\");"
                       echo "  Uses            = (\"Cron\");"
                       echo "  OrderPreference = \"Last\";"
                       echo "  Messages ="
                       echo "  {"
                       echo "    start = \"Starting OpenPKG ${prefix} hierarchy\";"
                       echo "    stop  = \"Stopping OpenPKG ${prefix} hierarchy\";"
                       echo "  };"
                       echo "}"
                     ) >${darwin_rc_dir}/StartupParameters.plist
                     chmod 644 ${darwin_rc_dir}/StartupParameters.plist
                 fi
                 ;;
             IRIX*/6.* )
                 if [ -f /etc/init.d/${name_old} ]; then
                     rm -f /etc/init.d/${name_old}
                 fi
                 if [ ! -f /etc/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/bin/openpkg rc all start ;;"
                       echo "    stop  ) exec ${prefix}/bin/openpkg rc all stop  ;;"
                       echo "esac"
                     ) >/etc/init.d/${name}
                     chmod 755 /etc/init.d/${name}
                     #   create corresponding links
                     ( cd /etc
                       ln -f init.d/${name} rc2.d/S99${name}
                       ln -f init.d/${name} rc0.d/K00${name}
                     ) || exit $?
                 fi
                 ;;
             CYGWIN*/* )
                 if [ -f /etc/rc.d/init.d/${name_old} ]; then
                     rm -f /etc/rc.d/init.d/${name_old}
                 fi
                 if [ ! -f /etc/rc.d/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "test -f /etc/rc.d/init.d/functions && . /etc/rc.d/init.d/functions"
                       echo "test -f /etc/sysconfig/network && . /etc/sysconfig/network"
                       echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/bin/openpkg rc all start ;;"
                       echo "    stop  ) exec ${prefix}/bin/openpkg rc all stop  ;;"
                       echo "esac"
                     ) >/etc/rc.d/init.d/${name}
                     chmod 755 /etc/rc.d/init.d/${name}
                     #   create corresponding symbolic links
                     ( cd /etc/rc.d
                       ln -s ../init.d/${name} rc2.d/S90${name}
                       ln -s ../init.d/${name} rc1.d/K10${name}
                     ) || exit $?
                 fi
                 ;;
         esac
     fi
     #   create the cron transfer entries
     if [ ".$cusr" != ".root" ]; then
         echo "openpkg:WARNING: skipping creation of system cron hooks" 1>&2
         echo "openpkg:WARNING: (would require root-privileges)" 1>&2
     else
         case "$plid" in
             FreeBSD/* | Linux/* )
                 if [ -f /etc/slackware-version ]; then
                     exists=`crontab -l | egrep "($prefix/bin/openpkg|$prefix/etc/rc)"`
                     if [ ".$exists" = . ]; then
                         EDITOR=/tmp/vipw.$$
                         VISUAL="$EDITOR"
                         export EDITOR
                         export VISUAL
                         ( echo "#!/bin/sh"
                           echo "(   echo \"# <OpenPKG prefix=$prefix pkg=openpkg>\""
                           echo "    echo \"# chronological tasks of ${prefix} OpenPKG hierarchy\""
                           echo "    echo \"0          0  1  *  *  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron monthly\""
                           echo "    echo \"0          0  *  *  0  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron weekly\""
                           echo "    echo \"0          0  *  *  *  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron daily\""
                           echo "    echo \"0          *  *  *  *  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron hourly\""
                           echo "    echo \"0,15,30,45 *  *  *  *  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron quarterly\""
                           echo "    echo \"# </OpenPKG>\""
                           echo ") >>\$1"
                         ) >$EDITOR
                         chmod a+x $EDITOR
                         ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
                         rm -f $EDITOR
                     fi
                 else
                     exists=`egrep "($prefix/bin/openpkg|$prefix/etc/rc)" /etc/crontab`
                     if [ ".$exists" = . ]; then
                         ( echo "# <OpenPKG prefix=$prefix pkg=openpkg>"
                           echo "# chronological tasks of ${prefix} OpenPKG hierarchy"
                           echo "0    0  1  *  *  root  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron monthly"
                           echo "0    0  *  *  0  root  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron weekly"
                           echo "0    0  *  *  *  root  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron daily"
                           echo "0    *  *  *  *  root  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron hourly"
                           echo "*/15 *  *  *  *  root  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron quarterly"
                           echo "# </OpenPKG>"
                         ) >>/etc/crontab
                     fi
                 fi
                 ;;
             SunOS/5.* | OSF1/V5.* | NetBSD/* | HP-UX/* | UnixWare/* | AIX/* | CYGWIN*/* | Darwin/* )
                 exists=`crontab -l | egrep "($prefix/bin/openpkg|$prefix/etc/rc)"`
                 if [ ".$exists" = . ]; then
                     EDITOR=/tmp/vipw.$$
                     VISUAL="$EDITOR"
                     export EDITOR
                     export VISUAL
                     ( echo "#!/bin/sh"
                       echo "(   echo \"# <OpenPKG prefix=$prefix pkg=openpkg>\""
                       echo "    echo \"# chronological tasks of ${prefix} OpenPKG hierarchy\""
                       echo "    echo \"0          0  1  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc cron monthly\""
                       echo "    echo \"0          0  *  *  0  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc cron weekly\""
                       echo "    echo \"0          0  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc cron daily\""
                       echo "    echo \"0          *  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc cron hourly\""
                       echo "    echo \"0,15,30,45 *  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc cron quarterly\""
                       echo "    echo \"# </OpenPKG>\""
                       echo ") >>\$1"
                     ) >$EDITOR
                     chmod a+x $EDITOR
                     ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
                     rm -f $EDITOR
                 fi
                 ;;
             IRIX*/6.* )
                 exists=`crontab -l | egrep "($prefix/bin/openpkg|$prefix/etc/rc)"`
                 if [ ".$exists" = . ]; then
                     ( crontab -l
                       echo "# <OpenPKG prefix=$prefix pkg=openpkg>"
                       echo "# chronological tasks of ${prefix} OpenPKG hierarchy"
                       echo "0          0  1  *  *  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron monthly"
                       echo "0          0  *  *  0  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron weekly"
                       echo "0          0  *  *  *  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron daily"
                       echo "0          *  *  *  *  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron hourly"
                       echo "0,15,30,45 *  *  *  *  [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron quarterly"
                       echo "# </OpenPKG>"
                     ) | /usr/bin/crontab || exit $?
                 fi
                 ;;
         esac
     fi
     #   remember what OpenPKG RPM version was installed, so we can
     #   correctly upgrade the RPM database in the %post section (see below).
     if [ -d ${prefix}/RPM/DB ]; then
         if [ -x "${prefix}/bin/openpkg" -a -x "${prefix}/libexec/openpkg/rpm" ]; then
             #   OpenPKG >= 2.0
             rpm="${prefix}/bin/openpkg rpm"
         else
             #   OpenPKG 1.x
             rpm="${prefix}/bin/rpm"
         fi
         rm -f ${prefix}/RPM/DB/.version >/dev/null 2>&1 || true
         $rpm --version 2>/dev/null |\
             sed -e 's;^;X;' \
                 -e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*$;\1;' \
                 -e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\).*$;\1;' \
                 -e 's;^X.*$;0.0;' \
                 >${prefix}/RPM/DB/.version
     fi
 %post
     #   optional postprocessing from "pre" section
     if [ -f %{l_prefix}.pre-post-process.sh ]; then
         sh %{l_prefix}.pre-post-process.sh
         rm -f %{l_prefix}.pre-post-process.sh
     fi
     #   update or initially create OpenPKG UUID configuration
     %{l_prefix}/bin/openpkg uuid update >/dev/null 2>&1 || true
     #   when upgrading from RPM 4 to RPM 5 there will be no
     #   initial license at all, so create one
     if [ ! -f %{l_prefix}/etc/openpkg/license ]; then
         echo "BOOT" >%{l_prefix}/etc/openpkg/license
         ( chown %{l_musr}:%{l_mgrp} %{l_prefix}/etc/openpkg/license
           chmod 644 %{l_prefix}/etc/openpkg/license
         ) >/dev/null 2>&1 || true
     fi
     #   finally switch from a possibly active BOOT license to EVAL license
     #   (notice: this is really the earliest time we can switch because the
     #   previous command had to create the <prefix>/etc/openpkg/uuid first!)
     if [ ".`cat %{l_prefix}/etc/openpkg/license`" = ".BOOT" ]; then
         echo "EVAL" >%{l_prefix}/etc/openpkg/license
     fi
     #   determine new and old OpenPKG RPM version
     V_rpm_new="%{V_rpm_major}.%{V_rpm_minor}"
     if [ -f %{l_prefix}/RPM/DB/.version ]; then
         V_rpm_old="`cat %{l_prefix}/RPM/DB/.version`"
         rm -f %{l_prefix}/RPM/DB/.version >/dev/null 2>&1 || true
     else
         V_rpm_old="0.0"
     fi
     #   make sure all RPM database files are present and that their
     #   attributes are correct, etc. This is not a database rebuild
     #   operation, so this is fully harmless and can be done always.
     %{l_prefix}/lib/openpkg/rpmdb --quiet --fixate >/dev/null 2>&1 || true
     #   check RPM database for upgrade requirements
     if [ ".$1" = .2 -a ".$V_rpm_old" != ".$V_rpm_new" ]; then
         #   RPM 4.0/4.1 does not allow concurrent database access, so we
         #   cannot upgrade the database immediately from here (because
         #   we are still running within the execution context of the
         #   old RPM which in turn has the database locked) and instead
         #   have to just drop a note to the administrator about database
         #   upgrading. RPM >= 4.2 in general allows concurrent database
         #   access, but the whole stuff is too risky here, too.
         ( echo "You are upgrading the OpenPKG bootstrap from a previous"
           echo "RPM $V_rpm_old based version to this RPM $V_rpm_new based"
           echo "version. The RPM database in %{l_prefix}/RPM/DB/ can be"
           echo "reused, but you first have to upgrade it as soon as"
           echo "possible to the latest format files by executing:"
           echo "    \$ %{l_prefix}/bin/openpkg rpm --db-rebuild"
           echo "In case of problems with the RPM database you can always"
           echo "execute the command:"
           echo "    \$ %{l_prefix}/bin/openpkg rpm --db-cleanup"
         ) | %{l_prefix}/lib/openpkg/rpmtool msg -b -t warn
     fi
     #   system command overriding support
     #   ATTENTION: THIS BETTER SHOULD BE REPLACED WITH A MORE GENERIC
     #   BUILD COMMAND OVERRIDE SOLUTION!
     if [ ! -d %{l_prefix}/lib/openpkg/override ]; then
         mkdir %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
     fi
     chown %{l_musr}:%{l_mgrp} %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
     case "`cat %{l_prefix}/etc/openpkg/platform`" in
         *-*-debian* | *-*-ubuntu* )
             #   FIXME: Evil hack to workaround build problems under Debian
             #   (at least 3.1) (and similar platforms) where a Debian
             #   install-info(8) exists which is both API and functionally
             #   incompatible to the de-facto standardized install-info(8)
             #   command from GNU Texinfo.
             if [ ! -f %{l_prefix}/lib/openpkg/override/install-info ]; then
                 ( echo "#!/bin/sh"
                   echo "echo 'OpenPKG: NOTICE: install-info(8) command execution overridden'"
                   echo "exit 0"
                 ) >%{l_prefix}/lib/openpkg/override/install-info
                 chmod 775 %{l_prefix}/lib/openpkg/override/install-info
             fi
             ;;
         *-*-macosx* | *-*-darwin* )
             #   FIXME: Evil hack to workaround the fact that Mac OS X'
             #   linker by default prefers the /usr/lib libraries and does
             #   not honor the -L options the way one would expect it.
             gcc="`%{l_prefix}/lib/openpkg/shtool path gcc`"
             cc="`%{l_prefix}/lib/openpkg/shtool path cc`"
             ld="`%{l_prefix}/lib/openpkg/shtool path ld`"
             if [ ".$gcc" != . -a ! -f %{l_prefix}/lib/openpkg/override/gcc ]; then
                 ( echo "#!/bin/sh"
                   echo "case \" \$* \" in"
                   echo "    *\" -c \"* | *\" -E \"* ) exec $gcc \"\$@\" ;;"
                   echo "    * ) exec $gcc -Wl,-search_paths_first \"\$@\" ;;"
                   echo "esac"
                 ) >%{l_prefix}/lib/openpkg/override/gcc
                 chmod 775 %{l_prefix}/lib/openpkg/override/gcc
             fi
             if [ ".$cc" != . -a ! -f %{l_prefix}/lib/openpkg/override/cc ]; then
                 ( echo "#!/bin/sh"
                   echo "case \" \$* \" in"
                   echo "    *\" -c \"* | *\" -E \"* ) exec $gcc \"\$@\" ;;"
                   echo "    * ) exec $cc -Wl,-search_paths_first \"\$@\" ;;"
                   echo "esac"
                 ) >%{l_prefix}/lib/openpkg/override/cc
                 chmod 775 %{l_prefix}/lib/openpkg/override/cc
             fi
             if [ ".$ld" != . -a ! -f %{l_prefix}/lib/openpkg/override/ld ]; then
                 ( echo "#!/bin/sh"
                   echo "exec $ld -search_paths_first \"\$@\""
                 ) >%{l_prefix}/lib/openpkg/override/ld
                 chmod 775 %{l_prefix}/lib/openpkg/override/ld
             fi
             ;;
     esac
     #   special support for fully unprivileged environments
     #   where we cannot switch the user at all with su(1),
     #   so we provide a dummy su(1) override command.
     if [ ".%{l_unprivileged}" = ".yes" ]; then
         ( echo "#!/bin/sh"
           echo "while [ \$# -gt 0 ]; do"
           echo "    case \"\$1\" in"
           echo "        - | -* ) shift        ;;"
           echo "        *      ) shift; break ;;"
           echo "    esac"
           echo "done"
           echo "exec /bin/sh \${1+\"\$@\"}"
         ) >%{l_prefix}/lib/openpkg/override/su
         chmod 775 %{l_prefix}/lib/openpkg/override/su
     fi
     #   FIXME: hack to workaround problems in environments with too few
     #   development tools. ATTENTION: see one paragraph above.
     if [ ! -d %{l_prefix}/lib/openpkg/fallback ]; then
         mkdir %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
     fi
     chown %{l_musr}:%{l_mgrp} %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
     #   cruel platform hack
     case "`cat %{l_prefix}/etc/openpkg/platform`" in
         *-*-cygwin* )
             #   Cygwin under Windows Vista dislikes executables with
             #   "patch" in the same and would require a "*.manifest"
             #   file applied with the "mt.exe" from the "Windows
             #   Software Development Kit (SDK)" in order to escape from
             #   UAC. An easy alternative is to just rename the file to a
             #   different name.
             cp  %{l_prefix}/lib/openpkg/patch \
                 %{l_prefix}/lib/openpkg/pitch
             %{l_prefix}/lib/openpkg/shtool subst \
                 -e 's;openpkg/patch;openpkg/pitch;g' \
                 %{l_prefix}/etc/openpkg/rpmmacros
             ;;
     esac
     #   print license
     ( echo ""
       echo "NOTICE: Proprietary components of the OpenPKG Framework are covered"
       echo "by the following terms and conditions and require a valid run-time"
       echo "license, issued by the OpenPKG GmbH. An initial license, which allows"
       echo "30 days of free use for evaluation purposes, is already pre-installed."
       echo "Please go to http://openpkg.com/go/framework-license to obtain"
       echo "your permanent license."
       echo ""
       %{l_prefix}/bin/openpkg --license
       echo "______________________________________________________________________________"
       echo ""
       echo "NOTICE: Open Source components of the OpenPKG Framework are covered"
       echo "by various standard Open Source distribution licenses, including"
       echo "the MIT, BSD, LGPL, GPL, Public-Domain and Artistic licenses."
       echo "They all allow you the use of those components free of charge."
       echo "See http://www.opensource.org/licenses for more details."
       echo ""
     ) | %{l_prefix}/lib/openpkg/rpmtool msg -b -t notice
     #   register package with central OpenPKG registry
     ( nohup %{l_prefix}/bin/openpkg register \
       </dev/null >/dev/null 2>&1 &
     ) </dev/null >/dev/null 2>&1 || true
 %preun
     [ ".$1" != .0 ] && exit 0
     #   remove override files
     if [ -d %{l_prefix}/lib/openpkg/override ]; then
         rm -rf %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
     fi
     #   remove fallback files
     if [ -d %{l_prefix}/lib/openpkg/fallback ]; then
         rm -rf %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
     fi
     #   remove files which are not RPM controlled
     rm -rf %{l_prefix}/RPM/TMP/* %{l_prefix}/RPM/TMP/.[a-z]* >/dev/null 2>&1 || true
     rm -rf %{l_prefix}/RPM/SRC/* %{l_prefix}/RPM/SRC/.[a-z]* >/dev/null 2>&1 || true
     rm -rf %{l_prefix}/RPM/PKG/* %{l_prefix}/RPM/PKG/.[a-z]* >/dev/null 2>&1 || true
     rm -rf %{l_prefix}/RPM/TR/*  %{l_prefix}/RPM/TR/.[a-z]*  >/dev/null 2>&1 || true
     rm -rf %{l_prefix}/RPM/DB/*  %{l_prefix}/RPM/DB/.[a-z]*  >/dev/null 2>&1 || true
     #   The following code usually would be done in a %postun section.
     #   But because we already had to remove the database in this %preun
     #   section (see the 'rm' commands above) in order to make RPM happy
     #   inside its own removal procedure, RPM would no longer find the
     #   %postun script (because it's recorded in the database files). So
     #   we have to perform the procedure already in this %preun script.
     #   except for the removal of the top-level directory it does not
     #   matter. But the top-level directory can only be removed after
     #   the RPM removal procedure took place, so we play a little delay
     #   trick below.
     #   determine current user
     cusr=`(id -un) 2>/dev/null ||\
           (id | sed -e 's;^[^(]*(\([^)]*\)).*;\1;') 2>/dev/null ||\
           (whoami) 2>/dev/null ||\
           (who am i | cut "-d " -f1) 2>/dev/null ||\
           echo $LOGNAME`
     #   determine runtime details (for both inside and outside RPM!!)
     user="%{l_musr}"
     group="%{l_mgrp}"
     prefix="%{l_prefix}"
     prefix=`echo "$prefix" | sed -e 's;//*;/;g' -e 's;/$;;'`
     #   determine platform id
     s=`(uname -s) 2>/dev/null` || s='Unknown'
     r=`(uname -r) 2>/dev/null` || r='0.0'
     plid="${s}/${r}"
     #   unregister instance in presence file
     presence="/etc/openpkg"
     exists=`cat $presence 2>/dev/null | egrep "^ *${prefix} *\$"`
     if [ ".$exists" != . ]; then
         if [ ".$cusr" != ".root" ]; then
             echo "openpkg:WARNING: skipping unregistering of $prefix in $presence" 1>&2
             echo "openpkg:WARNING: (would require root-privileges)" 1>&2
         else
             cp $presence $presence.bak && \
             egrep -v "^ *${prefix} *\$" $presence.bak >$presence
             rm -f $presence.bak >/dev/null 2>&1
             if [ ".`cat $presence`" = . ]; then
                 rm -f $presence >/dev/null 2>&1
             fi
         fi
     fi
     #   remove entry in /etc/shells
     shell="${prefix}/lib/openpkg/bash"
     exists=`cat /etc/shells 2>/dev/null | grep "^$shell"`
     if [ ".$exists" != . ]; then
         if [ ".$cusr" != ".root" ]; then
             echo "openpkg:WARNING: skipping deletion of $shell from /etc/shells" 1>&2
             echo "openpkg:WARNING: (would require root-privileges)" 1>&2
         else
             cp /etc/shells /etc/shells.bak && \
             grep -v "^${shell}" /etc/shells.bak >/etc/shells
             rm -f /etc/shells.bak >/dev/null 2>&1
         fi
     fi
     #   remove the hierarchy user/group
     for req in "super-user:%{l_susr}:%{l_suid}:%{l_sgrp}:%{l_sgid}" \
                "management:%{l_musr}:%{l_muid}:%{l_mgrp}:%{l_mgid}" \
                "restricted:%{l_rusr}:%{l_ruid}:%{l_rgrp}:%{l_rgid}" \
                "non-privileged:%{l_nusr}:%{l_nuid}:%{l_ngrp}:%{l_ngid}"; do
         #   split request into class/usr/uid/grp/gid
         OIFS="$IFS"; IFS=":"; set -- $req; IFS="$OIFS"
         class="$1"; usr="$2"; uid="$3"; grp="$4"; gid="$5"
         #   check whether user already exists
         exists=`(getent passwd "$usr"; \
                  grep "^$usr:" /etc/passwd; \
                  ypmatch "$usr" passwd; \
                  nismatch "$usr" passwd; \
                  nidump passwd . | grep "^$usr:"; \
                  dscl . -read "/users/$usr" | grep RecordName) 2>/dev/null | \
                  sed -e 'q'`
         if [ ".$exists" != . ]; then
             if [ ".$cusr" != ".root" ]; then
                 echo "openpkg:WARNING: skipping deletion of OpenPKG $class user $usr" 1>&2
                 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
             elif [ ".$usr" = ".root" ]; then
                 echo "openpkg:WARNING: skipping deletion of OpenPKG $class user $usr" 1>&2
                 echo "openpkg:WARNING: (would remove system standard user)" 1>&2
             else
                 case "$plid" in
                     FreeBSD/* | NetBSD/* )
                         cp /etc/master.passwd /etc/master.passwd.bak && \
                         grep -v "^${usr}:" /etc/master.passwd.bak >/etc/master.passwd
                         ( PATH="$PATH:/usr/sbin"; pwd_mkdb -p /etc/master.passwd ) || exit $?
                         rm -f /etc/master.passwd.bak >/dev/null 2>&1
                         ;;
                     Linux/* | SunOS/5.* | UnixWare/* )
                         cp /etc/passwd /etc/passwd.bak && \
                         grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
                         ( PATH="$PATH:/usr/sbin"; pwconv ) || exit $?
                         rm -f /etc/passwd.bak >/dev/null 2>&1
                         ;;
                     AIX/* )
                         rmuser -p "${usr}"
                         cp /etc/security/login.cfg /etc/security/login.cfg.bak && \
                         sed -e "/^usw:/,/^[^ ]/s;\\( *shells =.*\\),$shell\\(.*\\)\$;\\1\\2;" \
                             </etc/security/login.cfg.bak >/etc/security/login.cfg && \
                         rm -f /etc/security/login.cfg.bak >/dev/null 2>&1
                         ;;
                     OSF1/V5.* )
                         cp /etc/passwd /etc/passwd.bak && \
                         grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
                         ( PATH="$PATH:/usr/sbin"; mkpasswd /etc/passwd ) || exit $?
                         rm -f /etc/passwd.bak >/dev/null 2>&1
                         ;;
                     HP-UX/* )
                         cp /etc/passwd /etc/passwd.bak && \
                         grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
                         rm -f /etc/passwd.bak >/dev/null 2>&1
                         ;;
                     Darwin/10.[1-9]* | Darwin/1[1-9].* )
                         dscl . -delete "/users/${usr}"
                         ;;
                     Darwin/* )
                         niutil -destroy . "/users/${usr}"
                         ;;
                     IRIX*/6.* )
                         cp /etc/passwd /etc/passwd.bak && \
                         grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
                         if   [ -f /etc/shadow ]
                         then ( PATH="$PATH:/usr/sbin"; pwconv ) || exit $?
                         fi
                         rm -f /etc/passwd.bak >/dev/null 2>&1
                         ;;
                     CYGWIN*/* )
                         cp /etc/passwd /etc/passwd.bak && \
                         grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
                         rm -f /etc/passwd.bak >/dev/null 2>&1
                         ;;
                 esac
             fi
         fi
         #   check whether group already exists
         exists=`(getent group "$grp"; \
                 grep "^$grp:" /etc/group; \
                 ypmatch "$grp" group; \
                 nismatch "$grp" group; \
                 nidump group . | grep "^$grp:"; \
                 dscl . -read "/groups/$grp" | grep RecordName) 2>/dev/null | \
                 sed -e 'q'`
         if [ ".$exists" != . ]; then
             if [ ".$cusr" != ".root" ]; then
                 echo "openpkg:WARNING: skipping deletion of OpenPKG $class group $grp" 1>&2
                 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
             elif [ ".$usr" = ".root" ] || [ ".$grp" = ".root" ] || [ ".$grp" = ".wheel" ]; then
                 echo "openpkg:WARNING: skipping deletion of OpenPKG $class group $grp" 1>&2
                 echo "openpkg:WARNING: (would remove system standard group)" 1>&2
             else
                 case "$plid" in
                     Darwin/10.[1-9]* | Darwin/1[1-9].* )
                         dscl . -delete "/groups/${grp}"
                         ;;
                     Darwin/* )
                         niutil -destroy . "/groups/${grp}"
                         ;;
                     AIX/* )
                         rmgroup "${grp}"
                         ;;
                     * )
                         cp /etc/group /etc/group.bak && \
                         grep -v "^${grp}:" /etc/group.bak >/etc/group
                         rm -f /etc/group.bak >/dev/null 2>&1
                         ;;
                 esac
             fi
         fi
     done
     #   invalidate passwd and group tables from Name Service Cache Daemon to
     #   ensure chown/chgrp works immediately after pwconv on Linux and Solaris
     if [ -x /usr/sbin/nscd ]; then
         /usr/sbin/nscd -i passwd >/dev/null 2>&1 || true
         /usr/sbin/nscd -i group >/dev/null 2>&1 || true
     fi
     #   remove the startup/shutdown transfer scripts
     name="openpkg-`echo "$prefix" | sed -e 's;[^a-zA-Z0-9];;g'`"
     if [ ".$cusr" != ".root" ]; then
         echo "openpkg:WARNING: skipping deletion of system runcommand hooks" 1>&2
         echo "openpkg:WARNING: (would require root privileges)" 1>&2
     else
         case "$plid" in
             FreeBSD/* )
                 rm -f /etc/rc.d/${name} >/dev/null 2>&1
                 ;;
             NetBSD/* )
                 rm -f /etc/rc.d/${name} >/dev/null 2>&1
                 ;;
             Linux/* )
                 if [ -f /etc/gentoo-release ]; then
                     /sbin/rc-update del ${name} >/dev/null 2>&1
                     rm -f /etc/init.d/${name}   >/dev/null 2>&1
                 elif [ -f /etc/redhat-release ]; then
                     /sbin/chkconfig ${name} off    >/dev/null 2>&1
                     /sbin/chkconfig --del ${name}  >/dev/null 2>&1
                     rm -f /etc/rc.d/init.d/${name} >/dev/null 2>&1
                 else
                     #   sroot: script root directory
                     #   lroot: link   root directory
                     if [ -f /etc/debian_version ]; then
                         sroot=/etc/init.d
                         lroot=/etc/rc%%d.d
                     elif [ -f /etc/mandrake-release ]; then
                         sroot=/etc/rc.d/init.d
                         lroot=/etc/rc.d/rc%%d.d
                     elif [ -f /etc/SuSE-release ]; then
                         sroot=/etc/init.d
                         lroot=/etc/init.d/rc%%d.d
                     elif [ -f /etc/slackware-version ]; then
                         sroot=/etc/rc.d
                         lroot=/etc/rc.d/rc%%d.d
                         name="rc.${name}"
                     else
                         echo "WARNING: you are not running one of the supported standard" 1>&2
                         echo "WARNING: Linux platforms (Debian, RedHat, Mandrake, SuSE, Gentoo)."   1>&2
                         echo "WARNING: Guessing the location of the system init scripts!" 1>&2
                         sroot=""
                         lroot=""
                         for sr in /etc/rc.d/init.d /etc/init.d /sbin/init.d; do
                             if [ -d $sr ]; then
                                 sroot="$sr"
                                 break
                             fi
                         done
                         for lr in /etc/rc.d/rc2.d /etc/rc2.d /sbin/init.d/rc2.d; do
                             if [ -d $lr ]; then
                                 lroot="`echo $lr | sed -e 's;2;%%d;'`"
                                 break
                             fi
                         done
                         if [ ".$sroot" = . -o ".$lroot" = . ]; then
                             echo "ERROR: Failed to guess the location of the system init scripts!" 1>&2
                             exit 1
                         fi
                     fi
                     rm -f ${sroot}/${name} >/dev/null 2>&1
                     for i in 2 3 4 5; do
                         rm -f `echo $lroot | sed -e "s;%%d;$i;"`/S99${name} >/dev/null 2>&1
                     done
                     for i in 0 1 6; do
                         rm -f `echo $lroot | sed -e "s;%%d;$i;"`/K00${name} >/dev/null 2>&1
                     done
                     if [ -f /etc/slackware-version ]; then
                         for i in 0 1 2 3 4 5 6; do
                             l=`echo $lroot | sed -e "s;%%d;$i;"`
                             if [ -d $l ]; then
                                 rmdir $l >/dev/null 2>&1 || true
                             fi
                         done
                     fi
                 fi
                 ;;
             SunOS/5.1* )
                 suname="`echo "$prefix" | sed -e 's;[^a-zA-Z0-9];;g'`"
                 svcdir=/`[ -d /lib/svc/manifest ] && echo lib || echo var`
                 /usr/sbin/svcadm disable svc:/openpkg/${suname}:default; sleep 2
                 rm -f /${svcdir}/svc/manifest/openpkg/${suname}.xml >/dev/null 2>&1
                 rmdir /${svcdir}/svc/manifest/openpkg >/dev/null 2>&1 || true
                 /usr/sbin/svcadm restart svc:/system/manifest-import
                 ;;
             SunOS/5.* )
                 rm -f /etc/init.d/${name} >/dev/null 2>&1
                 rm -f /etc/rc3.d/S99${name} >/dev/null 2>&1
                 rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
                 rm -f /etc/rc1.d/K00${name} >/dev/null 2>&1
                 ;;
             UnixWare/* )
                 rm -f /etc/init.d/${name} >/dev/null 2>&1
                 rm -f /etc/rc2.d/S99${name} >/dev/null 2>&1
                 rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
                 rm -f /etc/rc1.d/K00${name} >/dev/null 2>&1
                 ;;
             AIX/* )
                 rm -f /etc/rc.d/init.d/${name} >/dev/null 2>&1
                 rm -f /etc/rc.d/rc2.d/S99${name} >/dev/null 2>&1
                 ;;
             OSF1/V5.* )
                 rm -f /sbin/init.d/${name} >/dev/null 2>&1
                 rm -f /sbin/rc3.d/S99${name} >/dev/null 2>&1
                 rm -f /sbin/rc0.d/K00${name} >/dev/null 2>&1
                 ;;
             HP-UX/* )
                 rm -f /sbin/init.d/${name} >/dev/null 2>&1
                 rm -f /etc/rc2.d/S900${name} >/dev/null 2>&1
                 rm -f /etc/rc1.d/K100${name} >/dev/null 2>&1
                 ;;
             Darwin/* )
                 darwin_rc_var="`echo ${name} | sed -e 's;-;_;g' | tr '[a-z]' '[A-Z]'`"
                 cp /etc/hostconfig /etc/hostconfig.bak && \
                 grep -v "^${darwin_rc_var}=" /etc/hostconfig.bak >/etc/hostconfig
                 rm -f /etc/hostconfig.bak >/dev/null 2>&1
                 rm -rf /Library/StartupItems/${name} >/dev/null 2>&1
                 ;;
             IRIX*/6.* )
                 rm -f /etc/init.d/${name} >/dev/null 2>&1
                 rm -f /etc/rc2.d/S99${name} >/dev/null 2>&1
                 rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
                 ;;
             CYGWIN*/* )
                 rm -f /etc/rc.d/init.d/${name} >/dev/null 2>&1
                 rm -f /etc/rc.d/rc2.d/S90${name} >/dev/null 2>&1
                 rm -f /etc/rc.d/rc1.d/K10${name} >/dev/null 2>&1
                 ;;
         esac
     fi
     #   remove the cron transfer entries
     if [ ".$cusr" != ".root" ]; then
         echo "openpkg:WARNING: skipping deletion of system cron hooks" 1>&2
         echo "openpkg:WARNING: (would require root-privileges)" 1>&2
     else
         case "$plid" in
             FreeBSD/* | Linux/* )
                 if [ -f /etc/slackware-version ]; then
                     EDITOR=/tmp/vipw.$$
                     VISUAL="$EDITOR"
                     export EDITOR
                     export VISUAL
                     p=`echo $prefix | sed -e 's;/;\\\\\\\\/;g'`
                     ( echo "cp \$1 \$1.bak"
                       echo "cat \$1.bak | sed -e \"/<OpenPKG prefix=$p pkg=openpkg>/,/<\\\\/OpenPKG>/d\" >\$1"
                       echo "rm -f \$1.bak"
                     ) >$EDITOR
                     chmod a+x $EDITOR
                     ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
                     rm -f $EDITOR
                 else
                     exists=`grep "<OpenPKG prefix=$prefix pkg=openpkg>" /etc/crontab`
                     if [ ".$exists" != . ]; then
                         p=`echo $prefix | sed -e 's;/;\\\\/;g'`
                         cp /etc/crontab /etc/crontab.bak
                         cat /etc/crontab.bak |\
                         sed -e "/<OpenPKG prefix=$p pkg=openpkg>/,/<\\/OpenPKG>/d" \
                         >/etc/crontab
                         rm -f /etc/crontab.bak >/dev/null 2>&1
                     fi
                 fi
                 ;;
             SunOS/5.* | OSF1/V5.* | NetBSD/* | HP-UX/* | UnixWare/* | AIX/* | CYGWIN*/* | Darwin/* )
                 EDITOR=/tmp/vipw.$$
                 VISUAL="$EDITOR"
                 export EDITOR
                 export VISUAL
                 p=`echo $prefix | sed -e 's;/;\\\\\\\\/;g'`
                 ( echo "cp \$1 \$1.bak"
                   echo "cat \$1.bak | sed -e \"/<OpenPKG prefix=$p pkg=openpkg>/,/<\\\\/OpenPKG>/d\" >\$1"
                   echo "rm -f \$1.bak"
                 ) >$EDITOR
                 chmod a+x $EDITOR
                 ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
                 rm -f $EDITOR
                 ;;
             IRIX*/6.* )
                 p=`echo $prefix | sed -e 's;/;\\\\\\/;g'`
                 ( crontab -l |
                   sed -e "/<OpenPKG prefix=$p pkg=openpkg>/,/<\/OpenPKG>/d"
                 ) | /usr/bin/crontab || exit $?
                 ;;
         esac
     fi
     #   delayed removal of top-level directory.
     ( sleep 2
       rm -rf %{l_prefix}/RPM/PKG/* >/dev/null 2>&1 || true
       rm -rf %{l_prefix}/RPM/SRC/* >/dev/null 2>&1 || true
       rm -rf %{l_prefix}/RPM/CACHE/* >/dev/null 2>&1 || true
       rm -rf %{l_prefix}/RPM/TMP/* %{l_prefix}/RPM/TMP/.[a-z]* >/dev/null 2>&1 || true
       rm -rf %{l_prefix}/RPM/DB/* %{l_prefix}/RPM/DB/.[a-z]* >/dev/null 2>&1 || true
       rmdir %{l_prefix}/RPM/DB >/dev/null 2>&1 || true
       rmdir %{l_prefix}/RPM >/dev/null 2>&1 || true
       rmdir %{l_prefix} >/dev/null 2>&1 || true
     ) </dev/null >/dev/null 2>/dev/null &

OpenPKG Specs / annotate

openpkg/openpkg.spec@a2c6460cfb16 (annotated)

openpkg/openpkg.spec