OpenPKG Specs: openpkg/openpkg.spec@b8e8f9dbbfd3 (annotated)

openpkg/openpkg.spec@b8e8f9dbbfd3 (annotated)

openpkg/openpkg.spec

Wed, 21 Sep 2011 13:51:49 +0200

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Wed, 21 Sep 2011 13:51:49 +0200
changeset 373: b8e8f9dbbfd3
parent 345: b7180006bcf1
child 427: 71503088f51b
permissions: -rw-r--r--

Update version and integrate setuid logic from upstream package vendor.

 ##
 ##  openpkg.spec -- OpenPKG RPM Package Specification
 ##  Copyright (c) 2000-2007 OpenPKG Foundation e.V. <http://openpkg.net/>
 ##  Copyright (c) 2000-2007 Ralf S. Engelschall <http://engelschall.com/>
 ##
 ##  Permission to use, copy, modify, and distribute this software for
 ##  any purpose with or without fee is hereby granted, provided that
 ##  the above copyright notice and this permission notice appear in all
 ##  copies.
 ##
 ##  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
 ##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 ##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 ##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
 ##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 ##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 ##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 ##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 ##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 ##  SUCH DAMAGE.
 ##
 #   NOTICE: This OpenPKG RPM specification is _very_ special, because
 #   it is used both for bootstrapping OpenPKG with its OpenPKG RPM and
 #   for regular builds of OpenPKG RPM in order to upgrade an existing
 #   installation. For this it has to interact correctly with the
 #   "openpkg.boot" script. See the documentation in the file "README"
 #   and the source of the companion script "openpkg.boot" for details,
 #   but do not touch anything here until you are 100% sure about what
 #   you are doing. In short: This script is allowed to use only a very
 #   restricted subset of the OpenPKG RPM functionality!
 #   BUILD REQUIREMENTS:
 #   o any sh(1)
 #   o any tar(1)
 #   o any make(1)
 #   o any cc(1)
 #   the package version/release
 %define       V_openpkg  20110424
 #   the used software versions
 %define       V_rpm      4.2.1
 %define       V_zlib     1.2.5
 %define       V_bzip2    1.0.5
 %define       V_beecrypt 4.1.2
 %define       V_curl     7.21.1
 %define       V_make     3.82
 %define       V_gzip     1.4
 %define       V_gzip_r   1.13
 %define       V_patch    2.6.1
 %define       V_tar      1.23
 %define       V_bash     3.2
 %define       V_uuid     1.6.2
 %define       V_config   20060923
 %define       V_registry 1.1.3
 %define       V_perl     5.10.0
 %define       V_openssl  0.9.8g
 %define       V_tools    1.4.5
 %define       V_exec     2.0.1-C
 #   package information
 Name:         openpkg
 Summary:      OpenPKG Bootstrap
 URL:          http://www.openpkg.org/
 Vendor:       OpenPKG
 Packager:     OpenPKG Foundation e.V.
 Distribution: OpenPKG Community
 Class:        CORE
 Group:        Bootstrapping
 License:      MIT/BSD/LGPL/GPL
 Version:      %{V_openpkg}
 Release:      %{V_openpkg}
 #   list of sources
 Source0:      ftp://ftp.gnu.org/gnu/patch/patch-%{V_patch}.tar.gz
 Source1:      ftp://ftp.cwru.edu/pub/bash/bash-%{V_bash}.tar.gz
 Source2:      ftp://ftp.gnu.org/gnu/make/make-%{V_make}.tar.gz
 Source3:      ftp://ftp.gnu.org/gnu/tar/tar-%{V_tar}.tar.gz
 Source4:      ftp://ftp.openpkg.org/sources/CPY/config/config-%{V_config}.tar.gz
 Source5:      ftp://ftp.openpkg.org/sources/CPY/openpkg-registry/openpkg-registry-%{V_registry}.tar.gz
 Source6:      ftp://ftp.openpkg.org/sources/CPY/openpkg-tools/openpkg-tools-%{V_tools}.tar.gz
 Source7:      ftp://ftp.openpkg.org/sources/CPY/openpkg/gzip-%{V_gzip}-openpkg-r%{V_gzip_r}.tar
 Source8:      ftp://ftp.gnu.org/gnu/gzip/gzip-%{V_gzip}.tar
 Source9:      ftp://ftp.openpkg.org/sources/CPY/openpkg/openpkg-executable-%{V_exec}.tar.gz
 Source10:     ftp://ftp.openpkg.org/sources/CPY/openpkg/rpm-%{V_rpm}.tar.gz
 Source11:     ftp://ftp.openpkg.org/sources/CPY/perl/perl-%{V_perl}-mini.tar.gz
 Source12:     ftp://ftp.openssl.org/source/openssl-%{V_openssl}.tar.gz
 Source13:     ftp://ftp.ossp.org/pkg/lib/uuid/uuid-%{V_uuid}.tar.gz
 Source14:     http://curl.haxx.se/download/curl-%{V_curl}.tar.gz
 Source15:     http://switch.dl.sourceforge.net/beecrypt/beecrypt-%{V_beecrypt}.tar.gz
 Source16:     http://www.bzip.org/%{V_bzip2}/bzip2-%{V_bzip2}.tar.gz
 Source17:     http://www.zlib.net/zlib-%{V_zlib}.tar.gz
 Source100:    bash.patch
 Source101:    beecrypt.patch
 Source102:    make.patch
 Source103:    openssl.patch
 Source104:    perl.patch
 Source105:    tar.patch
 Source106:    rpm.patch.bugfix
 Source107:    rpm.patch.feature
 Source108:    rpm.patch.porting
 Source109:    rpm.patch.regen
 Source200:    HISTORY
 Source201:    README
 Source202:    aux.prereq.sh
 Source203:    aux.usrgrp.sh
 Source204:    aux.wrapbin.sh
 Source205:    aux.wrapsrc.sh
 Source206:    dot.bash_login
 Source207:    dot.bashrc
 Source208:    dot.lsyncrc
 Source209:    install.sh
 Source210:    local.README
 Source211:    lsync
 Source212:    lsync.8
 Source213:    lsync.pod
 Source214:    man.sh
 Source215:    openpkg.1
 Source216:    openpkg.boot
 Source217:    openpkg.com.pgp
 Source218:    openpkg.net.pgp
 Source219:    openpkg.org.pgp
 Source220:    openpkg.pod
 Source221:    openpkg.sh
 Source222:    pod2man.sh
 Source223:    rc
 Source224:    rc.8
 Source225:    rc.conf
 Source226:    rc.func
 Source227:    rc.openpkg
 Source228:    rc.pod
 Source229:    release.8
 Source230:    release.pod
 Source231:    release.sh
 Source232:    root.README
 Source233:    rpm-config.8
 Source234:    rpm-config.pod
 Source235:    rpm-config.sh
 Source236:    rpmdb
 Source237:    rpmtool
 Source238:    rpmtool.8
 Source239:    rpmtool.pod
 Source240:    shtool
 Source241:    uuid.8
 Source242:    uuid.pod
 Source243:    uuid.sh
 Source244:    rpmmacros
 Source245:    rpmpopt
 Source246:    rpmrc
 #   build information
 Prefix:       %{l_prefix}
 BuildRoot:    %{l_buildroot}
 AutoReq:      no
 AutoReqProv:  no
 Provides:     OpenPKG
 %description
     This is the bootstrap package for the RPM-based Unix Software
     Package Hierarchy OpenPKG. The RPM Package Manager (RPM) is a
     sophisticated and portable package manager for Unix platforms,
     which supports automated building, installation, management and
     deinstallation of Unix software. RPM was originally designed and
     implemented for the RedHat Linux operating system where it manages
     every file on the whole system. OpenPKG uses RPM only for managing
     the files in a particular filesystem hierarchy dedicated to the
     installation of third-party software packages provided by the
     OpenPKG project.
     The OpenPKG bootstrap package includes the following software:
         RPM %{V_rpm}, ZLib %{V_zlib}, GNU Bzip2 %{V_bzip2},
         GNU Gzip %{V_gzip}, GNU Tar %{V_tar}, GNU Patch %{V_patch},
         GNU Make %{V_make}, GNU Bash %{V_bash}, cURL %{V_curl},
         OSSP uuid %{V_uuid}, BeeCrypt %{V_beecrypt},
         OpenSSL %{V_openssl}, Perl %{V_perl}
 %track
     prog openpkg:bash = {
         version   = %{V_bash}
         url       = ftp://ftp.cwru.edu/pub/bash/
         regex     = bash-(__VER__)\.tar\.gz
     }
     prog openpkg:bzip2 = {
         version   = %{V_bzip2}
         url       = http://www.bzip.org/downloads.html
         regex     = bzip2-(__VER__)\.tar\.gz
     }
     prog openpkg:curl = {
         version   = %{V_curl}
         url       = http://curl.haxx.se/download/
         regex     = curl-(__VER__)\.tar\.gz
     }
     prog openpkg:gzip = {
         comment   = "rse: intentionally tracked at gnu.org, although fetched from openpkg.org because of uncompression"
         version   = %{V_gzip}
         url       = ftp://ftp.gnu.org/gnu/gzip/
         regex     = gzip-(__VER__)\.tar(\.gz)?
     }
     prog openpkg:gzip_r = {
         version   = %{V_gzip_r}
         url       = ftp://ftp.openpkg.org/sources/CPY/openpkg/
         regex     = gzip-%{V_gzip}-openpkg-r(__VER__)\.tar
     }
     prog openpkg:make = {
         version   = %{V_make}
         url       = ftp://ftp.gnu.org/gnu/make/
         regex     = make-(__VER__)\.tar\.gz
     }
     prog openpkg:patch = {
         disabled
         comment   = "rse: directory missing after GNU.org security issues"
         version   = %{V_patch}
         url       = ftp://alpha.gnu.org/gnu/patch/
         regex     = patch-(__VER__)\.tar\.gz
     }
     prog openpkg:rpm = {
         disabled
         comment   = "rse: we have a .src.rpm extracted .tar.gz, because there is still no tarball for 4.2.1"
         version   = %{V_rpm}
         url       = ftp://ftp.rpm.org/pub/rpm/dist/rpm-4.2.x/
         regex     = rpm-(4\.2\.\d+)\.tar\.gz
     }
     prog openpkg:tar = {
         version   = %{V_tar}
         url       = ftp://ftp.gnu.org/gnu/tar/
         regex     = tar-(__VER__)\.tar\.gz
     }
     prog openpkg:zlib = {
         version   = %{V_zlib}
         url       = http://www.zlib.net/
         regex     = zlib-(__VER__)\.tar\.gz
     }
     prog openpkg:uuid = {
         version   = %{V_uuid}
         url       = ftp://ftp.ossp.org/pkg/lib/uuid/
         regex     = uuid-(__VER__)\.tar\.gz
     }
     prog openpkg:config = {
         version   = %{V_config}
         url       = ftp://ftp.openpkg.org/sources/CPY/config/
         regex     = config-(__VER__)\.tar\.gz
     }
     prog openpkg:beecrypt = {
         version   = %{V_beecrypt}
         url       = http://prdownloads.sourceforge.net/beecrypt/
         regex     = beecrypt-(__VER__)\.tar\.gz
     }
     prog openpkg:registry = {
         version   = %{V_registry}
         url       = ftp://ftp.openpkg.org/sources/CPY/openpkg-registry/
         regex     = openpkg-registry-(__VER__)\.tar\.gz
     }
     prog openpkg:perl = {
         version   = %{V_perl}
         url       = ftp://ftp.openpkg.org/sources/CPY/perl/
         regex     = perl-(__VER__)-mini\.tar\.gz
     }
     prog openpkg:openssl = {
         version   = %{V_openssl}
         url       = ftp://ftp.openssl.org/source/
         regex     = openssl-(\d+\.\d+\.\d+[a-z]?)\.tar\.gz
     }
     prog openpkg:openpkg-tools = {
         version   = %{V_tools}
         url       = ftp://ftp.openpkg.org/sources/CPY/openpkg-tools/
         regex     = openpkg-tools-(__VER__)\.tar\.gz
     }
     prog openpkg:openpkg-executable = {
         version   = %{V_exec}
         url       = ftp://ftp.openpkg.org/sources/CPY/openpkg/
         regex     = openpkg-executable-(__VER__-C)\.tar\.gz
     }
 %prep
     #   skip in bootstrap phase 2 (see openpkg.boot)
     [ ".$OPENPKG_BOOT" = .1 ] && exit 0
     #   switch into a temporary build area
     rm -rf openpkg-%{version}
     mkdir openpkg-%{version}
     cd openpkg-%{version}
     rm -f .buildenv
     touch .buildenv
     #   provide a bootstrap alternative to %{SOURCE xxx} because else
     #   it is not possible to upgrade a newer OpenPKG RPM with an older
     #   OpenPKG RPM.
     echo >>.buildenv 'SOURCE () {'
     echo >>.buildenv '    if [ -f "%{_specdir}/$1" ]; then'
     echo >>.buildenv '        echo "%{_specdir}/$1"'
     echo >>.buildenv '    else'
     echo >>.buildenv '        echo "%{_sourcedir}/$1"'
     echo >>.buildenv '    fi'
     echo >>.buildenv '}'
     echo >>.buildenv 'VERBOSE () {'
     echo >>.buildenv '    if [ -f "%{_specdir}/rpmtool" ]; then'
     echo >>.buildenv '        echo "$*" | sh %{_specdir}/rpmtool msg'
     echo >>.buildenv '    else'
     echo >>.buildenv '        echo "$*" | sh %{_sourcedir}/rpmtool msg'
     echo >>.buildenv '    fi'
     echo >>.buildenv '}'
     . ./.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Determine Build Tool Paths"; set -x
     #   determine path to shtool
     shtool=`SOURCE shtool`
     echo "shtool=$shtool" >>./.buildenv
     #   determine development tools
     #   - bootstrapping: %{l_xxx} is set via sed(1)
     #   - upgrading new: %{l_xxx} is set via rpmmacros
     #   - upgrading old: %{l_xxx} is not set at all
     #   manually make sure tar(1) is available
     l_tar=""; export l_tar
     [ ".%{?l_tar:set}"   = .set ] && l_tar="%{l_tar}"
     [ ".%{?use_tar:set}" = .set ] && l_tar="%{use_tar}"
     if [ ".$l_tar" = . ]; then
         l_tar=`sh $shtool path gtar tar`
         if [ ".$l_tar" = . ]; then
             echo "openpkg: prerequisite tool \`gtar' or \`tar' not found"
             exit 1
         fi
     fi
     echo "l_tar=\"$l_tar\"; export l_tar" >>.buildenv
     #   manually make sure make(1) is available
     l_make=""; export l_make
     [ ".%{?l_make:set}"   = .set ] && l_make="%{l_make}"
     [ ".%{?use_make:set}" = .set ] && l_make="%{use_make}"
     if [ ".$l_make" = . ]; then
         l_make=`sh $shtool path gmake make`
         if [ ".$l_make" = . ]; then
             echo "openpkg: prerequisite tool \`gmake' or \`make' not found"
             exit 1
         fi
     fi
     echo "l_make=\"$l_make\"; export l_make" >>.buildenv
     #   manually make sure cc(1) is available
     l_cc=""; export l_cc
     [ ".%{?l_cc:set}"   = .set ] && l_cc="%{l_cc}"
     [ ".%{?use_cc:set}" = .set ] && l_cc="%{use_cc}"
     if [ ".$l_cc" = . ]; then
         l_cc=`sh $shtool path gcc cc`
         if [ ".$l_cc" = . ]; then
             echo "openpkg: prerequisite tool \`gcc' or \`cc' not found"
             exit 1
         fi
     fi
     echo "l_cc=\"$l_cc\"; export l_cc" >>.buildenv
     #   manually make sure ar(1) is available
     l_ar=""; export l_ar
     [ ".%{?l_ar:set}"   = .set ] && l_ar="%{l_ar}"
     [ ".%{?use_ar:set}" = .set ] && l_ar="%{use_ar}"
     if [ ".$l_ar" = . ]; then
         l_ar=`sh $shtool path ar`
         if [ ".$l_ar" = . ]; then
             echo "openpkg: prerequisite tool \`ar' not found"
             exit 1
         fi
     fi
     echo "l_ar=\"$l_ar\"; export l_ar" >>.buildenv
     #   manually make sure ld(1) is available
     l_ld=""; export l_ld
     [ ".%{?l_ld:set}"   = .set ] && l_ld="%{l_ld}"
     [ ".%{?use_ld:set}" = .set ] && l_ld="%{use_ld}"
     if [ ".$l_ld" = . ]; then
         l_ld=`sh $shtool path ld`
         if [ ".$l_ld" = . ]; then
             echo "openpkg: prerequisite tool \`ld' not found"
             exit 1
         fi
     fi
     echo "l_ld=\"$l_ld\"; export l_ld" >>.buildenv
     #   manually make sure as(1) is available
     l_as=""; export l_as
     [ ".%{?l_as:set}"   = .set ] && l_as="%{l_as}"
     [ ".%{?use_as:set}" = .set ] && l_as="%{use_as}"
     if [ ".$l_as" = . ]; then
         l_as=`sh $shtool path as`
         if [ ".$l_as" = . ]; then
             echo "openpkg: prerequisite tool \`as' not found"
             exit 1
         fi
     fi
     echo "l_as=\"$l_as\"; export l_as" >>.buildenv
     #   manually make sure strip(1) is available or use a null replacement
     l_strip=""; export l_strip
     [ ".%{?l_strip:set}"   = .set ] && l_strip="%{l_strip}"
     [ ".%{?use_strip:set}" = .set ] && l_strip="%{use_strip}"
     if [ ".$l_strip" = . ]; then
         l_strip=`sh $shtool path strip ls`
         if [ ".$l_strip" = . ]; then
             echo "openpkg: prerequisite tool \`strip' not found"
             exit 1
         fi
     fi
     echo "l_strip=\"$l_strip\"; export l_strip" >>.buildenv
     #   determine path to aux.usrgrp.sh script
     usrgrp=`SOURCE aux.usrgrp.sh`
     echo "usrgrp=$usrgrp; export usrgrp" >>./.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Determine OpenPKG User/Group Name/Id Pairs"; set -x
     #   determine user/group name/id pairs
     #   - bootstrapping: %{l_[smrn]{usr,grp}} is set via sed(1)
     #   - upgrading new: %{l_[smrn]{usr,grp}} is set via rpmmacros
     #   - upgrading old: %{l_[smrn]{usr,grp}} is not set at all
     susr=""; [ ".%{?l_susr:set}"  = .set ] && susr="%{l_susr}"
     sgrp=""; [ ".%{?l_sgrp:set}"  = .set ] && sgrp="%{l_sgrp}"
     musr=""; [ ".%{?l_musr:set}"  = .set ] && musr="%{l_musr}"
     mgrp=""; [ ".%{?l_mgrp:set}"  = .set ] && mgrp="%{l_mgrp}"
     rusr=""; [ ".%{?l_rusr:set}"  = .set ] && rusr="%{l_rusr}"
     rgrp=""; [ ".%{?l_rgrp:set}"  = .set ] && rgrp="%{l_rgrp}"
     nusr=""; [ ".%{?l_nusr:set}"  = .set ] && nusr="%{l_nusr}"
     ngrp=""; [ ".%{?l_ngrp:set}"  = .set ] && ngrp="%{l_ngrp}"
     #   corresponding ids
     suid=""; [ ".%{?l_suid:set}"  = .set ] && suid="%{l_suid}"
     sgid=""; [ ".%{?l_sgid:set}"  = .set ] && sgid="%{l_sgid}"
     muid=""; [ ".%{?l_muid:set}"  = .set ] && muid="%{l_muid}"
     mgid=""; [ ".%{?l_mgid:set}"  = .set ] && mgid="%{l_mgid}"
     ruid=""; [ ".%{?l_ruid:set}"  = .set ] && ruid="%{l_ruid}"
     rgid=""; [ ".%{?l_rgid:set}"  = .set ] && rgid="%{l_rgid}"
     nuid=""; [ ".%{?l_nuid:set}"  = .set ] && nuid="%{l_nuid}"
     ngid=""; [ ".%{?l_ngid:set}"  = .set ] && ngid="%{l_ngid}"
     #   compat:
     usr="";  [ ".%{?l_fsusr:set}" = .set ] && usr="%{l_fsusr}"
     grp="";  [ ".%{?l_fsgrp:set}" = .set ] && grp="%{l_fsgrp}"
     eval `sh $usrgrp \
           --usr="$usr" --grp="$grp" \
           --susr="$susr" --sgrp="$sgrp" \
           --musr="$musr" --mgrp="$mgrp" \
           --rusr="$rusr" --rgrp="$rgrp" \
           --nusr="$nusr" --ngrp="$ngrp" \
           --suid="$suid" --sgid="$sgid" \
           --muid="$muid" --mgid="$mgid" \
           --ruid="$ruid" --rgid="$rgid" \
           --nuid="$nuid" --ngid="$ngid"`
     echo "susr=\"$susr\"; export susr" >>.buildenv
     echo "sgrp=\"$sgrp\"; export sgrp" >>.buildenv
     echo "musr=\"$musr\"; export musr" >>.buildenv
     echo "mgrp=\"$mgrp\"; export mgrp" >>.buildenv
     echo "rusr=\"$rusr\"; export rusr" >>.buildenv
     echo "rgrp=\"$rgrp\"; export rgrp" >>.buildenv
     echo "nusr=\"$nusr\"; export nusr" >>.buildenv
     echo "ngrp=\"$ngrp\"; export ngrp" >>.buildenv
     echo "suid=\"$suid\"; export suid" >>.buildenv
     echo "sgid=\"$sgid\"; export sgid" >>.buildenv
     echo "muid=\"$muid\"; export muid" >>.buildenv
     echo "mgid=\"$mgid\"; export mgid" >>.buildenv
     echo "ruid=\"$ruid\"; export ruid" >>.buildenv
     echo "rgid=\"$rgid\"; export rgid" >>.buildenv
     echo "nuid=\"$nuid\"; export nuid" >>.buildenv
     echo "ngid=\"$ngid\"; export ngid" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Determine OpenPKG Instance Environment"; set -x
     #   determine installation location id
     if [ ".%{?l_tag_fmt:set}" = .set ]; then
         tag="%{l_tag_fmt}"
     else
         tag="<compat>"
     fi
     echo "tag=\"$tag\"; export tag" >>.buildenv
     #   determine platform id
     s=`(uname -s) 2>/dev/null` || s='Unknown'
     r=`(uname -r) 2>/dev/null` || r='0.0'
     plid="${s}/${r}"
     echo "plid=\"$plid\"; export plid" >>.buildenv
     #   determine platform-specific build environment
     case $plid in
         FreeBSD/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         NetBSD/*  ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         Linux/*   ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         SunOS/*   ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
         UnixWare/*) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
         AIX/*     ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
         Darwin/*  ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         OSF1/V5.* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         HP-UX/*   ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         IRIX*/6.* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
         *         ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
     esac
     case $plid in
         FreeBSD/* ) l_build_ldlp="/lib:/usr/lib" ;;
         NetBSD/*  ) l_build_ldlp="/lib:/usr/lib" ;;
         Linux/*   ) l_build_ldlp="/lib:/usr/lib" ;;
         SunOS/*   ) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
         UnixWare/*) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
         AIX/*     ) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
         Darwin/*  ) l_build_ldlp="/usr/lib" ;;
         OSF1/V5.* ) l_build_ldlp="/usr/lib" ;;
         HP-UX/*   ) l_build_ldlp="/usr/lib" ;;
         IRIX*/6.* ) l_build_ldlp="/usr/lib" ;;
         *         ) l_build_ldlp="/usr/lib" ;;
     esac
     case $plid in
         *         ) l_build_ulim=":" ;;
     esac
     echo "l_build_path=\"$l_build_path\"; export l_build_path" >>.buildenv
     echo "l_build_ldlp=\"$l_build_ldlp\"; export l_build_ldlp" >>.buildenv
     echo "l_build_ulim=\"$l_build_ulim\"; export l_build_ulim" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Build GNU gzip (Compression Tool)"; set -x
     #   bootstrap GNU zip tool
     ${l_tar} xf `SOURCE gzip-%{V_gzip}.tar` 2>/dev/null || true
     ${l_tar} xf `SOURCE gzip-%{V_gzip}-openpkg-r%{V_gzip_r}.tar` 2>/dev/null || true
     ( cd gzip-%{V_gzip}
       echo "ac_cv_prog_cc_g=no" >config.cache
       case $plid in
           Darwin/* ) echo "gzip_cv_assembler=no" >>config.cache ;;
       esac
       CC="${l_cc}" \
       GREP="grep" \
       MAKE="${l_make}" \
       ./configure \
           --cache-file=./config.cache
       ${l_make} || exit $?
       ( mv gzip ..; ${l_make} clean || true; mv ../gzip . ) || exit $?
     ) || exit $?
     l_gzip="`pwd`/gzip-%{V_gzip}/gzip"; export l_gzip
     echo "l_gzip=\"$l_gzip\"; export l_gzip" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Unpack GNU configuration guessing utilities"; set -x
     #   unpack GNU config.guess
     ${l_gzip} -dc `SOURCE config-%{V_config}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Build GNU patch (Source Patching Tool)"; set -x
     #   bootstrap GNU patch tool
     ${l_gzip} -dc `SOURCE patch-%{V_patch}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
     ( cd patch-%{V_patch}
       chmod u+w config.guess config.sub >/dev/null 2>&1 || true
       cp ../config/config.guess .
       cp ../config/config.sub   .
       ( echo 'ac_cv_func_setmode=${ac_cv_func_setmode=no}'
         echo 'ac_cv_prog_cc_g=no'
         false=`sh $shtool path false`
         echo "ac_cv_path_ed_PROGRAM=\${ac_cv_path_ed_PROGRAM=$false}"
       ) >config.cache
       CC="${l_cc}" \
       GREP="grep" \
       ./configure \
           --cache-file=./config.cache \
           --disable-largefile
       ${l_make} || exit $?
       ( mv src/patch ..; ${l_make} clean || true; mv ../patch . ) || exit $?
     ) || exit $?
     l_patch="`pwd`/patch-%{V_patch}/patch"; export l_patch
     echo "l_patch=\"$l_patch\"; export l_patch" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build GNU tar (Archiving Tool)"; set -x
     #   build GNU tar tool
     ${l_gzip} -dc `SOURCE tar-%{V_tar}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
     ( cd tar-%{V_tar}
       ${l_patch} -p0 <`SOURCE tar.patch`
       ( echo 'am_cv_func_iconv=no'
         echo 'am_cv_lib_iconv=no'
         echo 'ac_cv_lib_iconv_iconv=no'
         echo 'ac_cv_header_iconv_h=no'
         echo 'ac_cv_type_iconv_t=no'
       ) >config.cache
       CC="${l_cc}" \
       MAKE="${l_make}" \
       MAKEINFO="true" \
       GREP="grep" \
       ./configure \
           --cache-file=./config.cache \
           --prefix=%{l_prefix} \
           --disable-nls
       ${l_make} || exit $?
       ( mv src/tar ..; ${l_make} clean || true; mv ../tar . ) || exit $?
     ) || exit $?
     l_tar="`pwd`/tar-%{V_tar}/tar"; export l_tar
     echo "l_tar=\"$l_tar\"; export l_tar" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Unpack Distribution Tarballs"; set -x
     #   unpack distribution tarballs
     ${l_gzip} -dc `SOURCE rpm-%{V_rpm}.tar.gz`                        | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE zlib-%{V_zlib}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE bzip2-%{V_bzip2}.tar.gz`                    | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE curl-%{V_curl}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE make-%{V_make}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE bash-%{V_bash}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE uuid-%{V_uuid}.tar.gz`                      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE beecrypt-%{V_beecrypt}.tar.gz`              | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE openpkg-registry-%{V_registry}.tar.gz`      | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE perl-%{V_perl}-mini.tar.gz`                 | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE openssl-%{V_openssl}.tar.gz`                | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE openpkg-tools-%{V_tools}.tar.gz`            | ${l_tar} xf - 2>/dev/null || true
     ${l_gzip} -dc `SOURCE openpkg-executable-%{V_exec}.tar.gz`        | ${l_tar} xf - 2>/dev/null || true
     #   update config.guess/config.sub
     for dir in rpm-%{V_rpm} rpm-%{V_rpm}/popt beecrypt-%{V_beecrypt} \
                curl-%{V_curl} make-%{V_make} bash-%{V_bash}/support; do
         chmod u+w $dir/config.guess $dir/config.sub >/dev/null 2>&1 || true
         cp config/config.guess $dir/
         cp config/config.sub   $dir/
     done
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Apply OpenPKG Patches to Distributions"; set -x
     #   apply OpenPKG patches to distribution trees
     ( cd rpm-%{V_rpm}
       sed -e "s;@l_prefix@;%{l_prefix};g" <`SOURCE rpm.patch.bugfix`  | ${l_patch} -p0
       sed -e "s;@l_prefix@;%{l_prefix};g" <`SOURCE rpm.patch.feature` | ${l_patch} -p0
       sed -e "s;@l_prefix@;%{l_prefix};g" <`SOURCE rpm.patch.porting` | ${l_patch} -p0
       sed -e "s;@l_prefix@;%{l_prefix};g" <`SOURCE rpm.patch.regen`   | ${l_patch} -p0
       rm -rf db/docs # just reduce disk size of source tree
     ) || exit $?
     ( cd make-%{V_make}
       ${l_patch} -p0 <`SOURCE make.patch`
     ) || exit $?
     ( cd bash-%{V_bash}
       ${l_patch} -p0 <`SOURCE bash.patch`
       sleep 1
       touch y.tab.[ch]
       touch configure config.h.in
     ) || exit $?
     ( cd beecrypt-%{V_beecrypt}
       ${l_patch} -p0 <`SOURCE beecrypt.patch`
     ) || exit $?
     ( cd perl-%{V_perl}
       ${l_patch} -p0 <`SOURCE perl.patch`
     ) || exit $?
     ( cd openssl-%{V_openssl}
       ${l_patch} -p0 <`SOURCE openssl.patch`
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "PREPARATION: Build GNU make (Build Tool)"; set -x
     #   bootstrap GNU make tool
     ( cd make-%{V_make}
       CC="${l_cc}" \
       GREP="grep" \
       ./configure \
           --without-libiconv-prefix \
           --without-libintl-prefix \
           --disable-nls \
           --disable-largefile
       ${l_make}
       ( mv make ..; ${l_make} clean || true; mv ../make . ) || exit $?
     ) || exit $?
     l_make="`pwd`/make-%{V_make}/make"; export l_make
     echo "l_make=\"$l_make\"; export l_make" >>.buildenv
 %build
     #   skip in bootstrap phase 2 (see openpkg.boot)
     [ ".$OPENPKG_BOOT" = .1 ] && exit 0
     #   switch into a temporary build area
     cd openpkg-%{version}
     . ./.buildenv
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build GNU bash (Bourne-Again Shell)"; set -x
     #   build GNU bash tool
     ( cd bash-%{V_bash}
       sh $shtool subst \
           -e 's;@l_openpkg_release@;OpenPKG;' \
           version.c
       ( #   force disabled wide-character support
         echo "ac_cv_header_wchar_h=no"
         echo "ac_cv_header_wctype_h=no"
         echo "ac_cv_func_mbsrtowcs=no"
         #   force disabled internationalization support
         echo "ac_cv_header_libintl_h=no"
         echo "ac_cv_func_gettext=no"
         echo "ac_cv_func_textdomain=no"
         echo "ac_cv_func_bindtextdomain=no"
         echo "ac_cv_lib_intl_bindtextdomain=no"
         #   disable building with debug symbols
         echo "ac_cv_prog_cc_g=no"
       ) >config.cache
       AUTOCONF="true" \
       CC="${l_cc}" \
       MAKE="${l_make}" \
       ./configure \
           --cache-file=./config.cache \
           --prefix=%{l_prefix} \
           --without-curses \
           --without-gnu-malloc \
           --disable-nls
       ${l_make} || exit $?
       ( mv bash ..; ${l_make} clean || true; mv ../bash . ) || exit $?
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build GNU bzip2 (Compression Library)"; set -x
     #   build BZIP2 library
     ( cd bzip2-%{V_bzip2}
       ${l_make} CC="${l_cc}" CFLAGS="-O" libbz2.a bzip2 || exit $?
       ( echo "# libbz2.la - a libtool library file"
         echo "# Generated by ltmain.sh - GNU libtool x.x.x"
         echo "dlname=''"
         echo "library_names=''"
         echo "old_library='libbz2.a'"
         echo "dependency_libs=''"
         echo "current=0"
         echo "age=0"
         echo "revision=0"
         echo "installed=no"
         echo "dlopen=''"
         echo "dlpreopen=''"
         echo "libdir='%{l_prefix}'"
       ) >libbz2.la
       ln -s . .libs
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build Zlib (Compression Library)"; set -x
     #   build ZLIB library
     ( cd zlib-%{V_zlib}
       CC="${l_cc}" CFLAGS="-O" ./configure
       ${l_make} CC="${l_cc}" libz.a || exit $? # intentionally do not pass CFLAGS here
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build OSSP uuid (UUID Generation Tool)"; set -x
     #   build OSSP uuid tool
     ( cd uuid-%{V_uuid}
       CC="${l_cc}" \
       CFLAGS="-O" \
       GREP="grep" \
       ./configure \
         --prefix=%{l_prefix} \
         --disable-shared
       ${l_make} || exit $?
       ( mv uuid ..; ${l_make} clean || true; mv ../uuid . ) || exit $?
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build Perl (Programming Language)"; set -x
     #   build Perl tool
     ( cd perl-%{V_perl}
       chmod -R u+w .
       sh $shtool subst \
           -e 's;\(.*for thislib in $libswanted.*\);libswanted=`echo " $libswanted " | sed -e "s/ bind / /g" -e "s/ db / /g" -e "s/ gdbm / /g" -e "s/ iconv / /g"`\; \1;' \
           -e 's;package=perl5;package=perl;' \
           Configure
       sh $shtool subst \
           -e 's; */usr/local/lib;;' \
           hints/freebsd.sh hints/netbsd.sh
       libdirs=""
       for dir in %{l_prefix}/lib /lib64 /usr/lib64 /lib /usr/lib /usr/ccs/lib; do
           [ -d $dir ] && libdirs="$libdirs $dir"
       done
       loclibs=""
       case `(uname -s) 2>/dev/null` in
           Linux ) loclibs="-lm -lrt" ;;
       esac
       PATH=$PATH:`echo "${l_make}" | sed -e 's;\(.*\)/[^/][^/]*$;\1;'` \
       ./Configure \
           -d -e -s \
           -Dprefix=%{l_prefix} \
           -Dvendorprefix=%{l_prefix} \
           -Dinstallprefix=%{l_prefix} \
           -Dinstallstyle="lib/perl5" \
           -Dman1dir=%{l_prefix}/man/man1 \
           -Dman3dir=%{l_prefix}/man/man3 \
           -Dcc="${l_cc}" -Uoptimize \
           -Dlocincpth="%{l_prefix}/include" \
           -Dloclibpth="%{l_prefix}/lib" \
           -Dldflags="-L""%{l_prefix}/lib" \
           -Dlibpth="$libdirs" \
           -Dglibpth="$libdirs" \
           -Dlibs="$loclibs" \
           -Dscriptdir="%{l_prefix}/bin" \
           -Uinstallusrbinperl \
           -Adefine:useshrplib='false' \
           -Ui_malloc -Ui_iconv -Ui_db
       ${l_make} miniperl || exit $?
       rm -f *.o >/dev/null 2>&1 || true
     ) || exit $?
     l_perl="`pwd`/perl-%{V_perl}/miniperl"; export l_perl
     echo "l_perl=\"$l_perl\"; export l_perl" >>.buildenv
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build OpenSSL (Crypography and SSL/TLS Toolkit)"; set -x
     #   build OpenSSL toolkit
     ( cd openssl-%{V_openssl}
       sh $shtool subst \
           -e 's;-m486;-march=i486;g' \
           -e 's;BN_LLONG *;;' \
           Configure
       sh $shtool subst \
           -e 's;test "$OSTYPE" = msdosdjgpp;true;' \
           util/point.sh
       sh $shtool subst \
           -e "1s;^.*\$;#!$l_perl;" \
           Configure `find . -name "*.pl" -print`
       opts=""
       case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
           *-solaris*       ) opts="-lnsl -lsocket" ;;
       esac
       case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
           amd64-*          ) opts="$opts -fPIC" ;;
           ia64-*           ) opts="$opts -fPIC" ;;
           sparc64-freebsd* ) opts="$opts -fPIC" ;;
       esac
       CC="${l_cc}" \
       PERL="${l_perl}" \
       ./config \
           --prefix=%{l_prefix} \
           no-asm no-shared no-dso \
           no-zlib no-idea no-threads no-krb5 no-hw \
           $opts
       ${l_make} CC="${l_cc}" build_libs build_apps || exit $?
       ( mkdir lib; cd lib; ln -s ../lib*.a . ) || exit $?
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build cURL (URL Fetching Tool)"; set -x
     #   build cURL tool
     ( cd curl-%{V_curl}
       sh $shtool subst \
           -e '/LINENO: error: C[+]* preprocessor/{N;N;N;N;s/.*/:/;}' \
           configure
       ( echo 'ac_cv_header_openssl_engine_h=no'
         echo 'lt_cv_prog_compiler_c_o_F77=no'
         echo 'lt_cv_sys_max_cmd_len=100'
       ) >config.cache
       CC="${l_cc}" \
       MAKE="${l_make}" \
       CFLAGS="-I`pwd`/../zlib-%{V_zlib}" \
       CPPFLAGS="-I`pwd`/../zlib-%{V_zlib}" \
       LDFLAGS="-L`pwd`/../zlib-%{V_zlib}" \
       GREP="grep" \
       ./configure \
           --cache-file=./config.cache \
           --without-libidn \
           --disable-shared \
           --disable-thread \
           --disable-ipv6 \
           --disable-ldap \
           --with-zlib=`pwd`/../zlib-%{V_zlib} \
           --with-ssl=`pwd`/../openssl-%{V_openssl} \
           --with-ca-bundle=%{l_prefix}/etc/openpkg/openpkg.x509
       ${l_make} || exit $?
       ( mv src/curl ..; ${l_make} clean || true; mv ../curl ./src ) || exit $?
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build BeeCrypt (Cryptography Library)"; set -x
     #   build BeeCrypt library
     ( cd beecrypt-%{V_beecrypt}
       sh $shtool subst \
           -e 's;^[ 	][ 	]*#;#;' \
           aes.c base64.c blowfish.c entropy.c fips186.c fips186.h md5.c \
           md5.h mp.c mtprng.c mtprng.h sha1.c sha1.h sha256.c sha256.h timestamp.c
       sh $shtool subst \
          -e 's;cppglue\.lo;;g' \
          -e 's;cppglue\.cxx;;g' \
          -e '/^CXX = /s;@CXX@;@CC@;g' \
          Makefile.in
       sh $shtool subst \
           -e '/LINENO: error: C[+]* preprocessor/{N;N;N;N;s/.*/:/;}' \
           configure
       ( echo 'ac_cv_have_dev_dsp=no'
         echo 'ac_cv_have_dev_audio=no'
         echo 'ac_cv_func_gettimeofday=yes'
         echo 'bc_cv_as_noexecstack=no'
       ) >config.cache
       CC="${l_cc}" \
       MAKE="${l_make}" \
       CFLAGS="-O" \
       ./configure \
         --cache-file=./config.cache \
         --prefix=%{l_prefix} \
         --without-cplusplus \
         --without-java \
         --without-python \
         --with-cpu=none \
         --with-arch=none \
         --disable-threads \
         --disable-shared
       ${l_make} || exit $?
       cp .libs/libbeecrypt.a .
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build RPM (RPM Package Manager)"; set -x
     #   build RPM
     ( br=`pwd`
       cd rpm-%{V_rpm}
       #   remove object files accidentally distributed with the RPM tarball
       rm -f db/build_unix/*.o
       rm -f db/build_unix/*.lo
       #   remove embedded zlib (we are linking with an external one)
       rm -rf zlib
       #   kill Linux-based preconfigured DB header, to allow the Makefiles to
       #   symlink to it the header that is configured for the current system.
       rm -f rpmdb/db.h
       #   make sure we do not trigger Autoconf/Automake tools
       touch configure
       touch config.h.in
       #   disable running of any Autoconf/Automake tools
       ACLOCAL=true
       AUTOCONF=true
       AUTOMAKE=true
       AUTOHEADER=true
       MAKEINFO=true
       AMTAR=true
       export ACLOCAL AUTOMAKE AUTOHEADER MAKEINFO AMTAR
       #   cheat GNU Autoconf
       ( echo 'ac_cv_path_MSGFMT=:'
         echo 'ac_cv_path_GMSGFMT=:'
         echo 'ac_cv_path_XGETTEXT=:'
         echo 'ac_cv_path_MSGMERGE=:'
         echo "ac_cv_path_MKDIR='%{l_prefix}/lib/openpkg/shtool mkdir -f -p -m 755'"
         echo "ac_cv_path___MKDIR='%{l_prefix}/lib/openpkg/shtool mkdir -f -p -m 755'"
         echo "ac_cv_path___PYTHON=true"
         echo "ac_cv_path___DOXYGEN=true"
         echo "acl_cv_rpath=no"
         echo "ac_cv_header_getopt_h=no"
       ) >config.cache
       #   provide platform identification
       os_name=`(uname -s) 2>/dev/null` || os_name='Unknown'
       os_name=`echo "${os_name}" |\
                sed -e 's;[^a-zA-Z0-9];;g' |\
                tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
       #   set build tool flags
       CC="${l_cc}"
       CPPFLAGS="-DOPENPKG -DOPENPKG_${os_name} -I$br/zlib-%{V_zlib} -I$br/bzip2-%{V_bzip2} -I$br/beecrypt-%{V_beecrypt}"
       CFLAGS="$CPPFLAGS"
       LDFLAGS="-L$br/zlib-%{V_zlib} -L$br/bzip2-%{V_bzip2} -L$br/beecrypt-%{V_beecrypt}"
       LIBS="$LDFLAGS -lz -lbz2 -lbeecrypt"
       case $os_name in
            SUNOS* ) LIBS="$LIBS -lresolv" ;;
            IRIX*  ) LIBS="$LIBS -lgen" ;;
       esac
       export CC CPPFLAGS CFLAGS LDFLAGS LIBS
       #   adjust for BeeCrypt 4.0
       sh $shtool subst \
           -e 's;beecrypt\.api\.h;beecrypt.h;g' \
           rpmio/rpmio_internal.h
       sh $shtool subst \
           -e 's;\(rsavrfy(\)\(&dig->rsa_pk\);\1\2.n, \2.e;g' \
           lib/signature.c
       sh $shtool subst \
           -e 's;\(^LIBS =\)[ \t]*;\1 -ldb;' \
           -e 's;\(^rpmdb_[^_][^_]*_LDFLAGS =\)[ \t]*;\1 -L$(top_srcdir)/db3;g' \
           rpmdb/Makefile.in
       sh $shtool subst \
           -e 's;\(^myLDFLAGS =\);\1 -L$(top_srcdir)/db3;' \
           Makefile.in
       #   configure the package
       MAKE="${l_make}" \
       sh ./configure \
           --cache-file=./config.cache \
           --prefix=%{l_prefix} \
           --with-db \
           --with-glob \
           --without-python \
           --without-apidocs \
           --disable-shared \
           --disable-rpath \
           --disable-nls
       #   deny automatic dependency calculations
       rm -f find-provides find-requires
       ln -s autodeps/none find-provides
       ln -s autodeps/none find-requires
       #   build the package
       ${l_make}
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "BUILD: Build OpenPKG Frontend (Set-UID Wrapper)"; set -x
     #   build "openpkg" executable
     ( cd openpkg-executable-%{V_exec}
       ${l_make} \
           CC="${l_cc}" \
           OPENPKG_PREFIX="%{l_prefix}" \
           OPENPKG_SUSR="%{l_susr}" \
           OPENPKG_MUSR="%{l_musr}"
     ) || exit $?
 %install
     #   skip in bootstrap phase 2 (see openpkg.boot)
     [ ".$OPENPKG_BOOT" = .1 ] && exit 0
     #   switch into a temporary build area
     cd openpkg-%{version}
     . ./.buildenv
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Create Installation Filesystem Hierarchy"; set -x
     #   create installation hierarchy
     rm -rf $RPM_BUILD_ROOT
     sh $shtool mkdir -f -p -m 755 $RPM_BUILD_ROOT%{l_prefix}
     for dir in bin etc include info lib libexec man sbin share var cgi pub local; do
         test -d $RPM_BUILD_ROOT%{l_prefix}/$dir || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/$dir
     done
     for i in 1 2 3 4 5 6 7 8 9; do
         test -d $RPM_BUILD_ROOT%{l_prefix}/man/man$i || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/man/man$i
         test -d $RPM_BUILD_ROOT%{l_prefix}/man/cat$i || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/man/cat$i
     done
     for dir in PKG bin etc include info lib man sbin; do
         test -d $RPM_BUILD_ROOT%{l_prefix}/local/$dir || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/local/$dir
     done
     for i in 1 2 3 4 5 6 7 8 9; do
         test -d $RPM_BUILD_ROOT%{l_prefix}/local/man/man$i || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/local/man/man$i
         test -d $RPM_BUILD_ROOT%{l_prefix}/local/man/cat$i || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/local/man/cat$i
     done
     test -d $RPM_BUILD_ROOT%{l_prefix}/RPM || \
     mkdir $RPM_BUILD_ROOT%{l_prefix}/RPM
     for dir in SRC PKG DB TMP; do
         test -d $RPM_BUILD_ROOT%{l_prefix}/RPM/$dir || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/RPM/$dir
     done
     mkdir $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg
     mkdir $RPM_BUILD_ROOT%{l_prefix}/include/openpkg
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Installation of RPM"; set -x
     #   install RPM into installation hierarchy
     ( cd rpm-%{V_rpm}
       DESTDIR="$RPM_BUILD_ROOT"
       export DESTDIR
       ${l_make} install
     ) || exit $?
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Install Additional Files"; set -x
     #   add additional development files
     cp rpm-%{V_rpm}/misc/glob.h $RPM_BUILD_ROOT%{l_prefix}/include/rpm/
     cp zlib-%{V_zlib}/zlib.h $RPM_BUILD_ROOT%{l_prefix}/include/rpm/
     cp zlib-%{V_zlib}/zconf.h $RPM_BUILD_ROOT%{l_prefix}/include/rpm/
     cp zlib-%{V_zlib}/libz.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmz.a
     cp bzip2-%{V_bzip2}/bzlib.h $RPM_BUILD_ROOT%{l_prefix}/include/rpm/
     cp bzip2-%{V_bzip2}/libbz2.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmbz2.a
     cp beecrypt-%{V_beecrypt}/beecrypt.h $RPM_BUILD_ROOT%{l_prefix}/include/rpm/
     cp beecrypt-%{V_beecrypt}/libbeecrypt.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmbeecrypt.a
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Post-Adjust Installation"; set -x
     #   post-adjust RPM installation (namespace-clean POPT inclusion)
     mv $RPM_BUILD_ROOT%{l_prefix}/lib/libpopt.a \
        $RPM_BUILD_ROOT%{l_prefix}/lib/librpmpopt.a
     mv $RPM_BUILD_ROOT%{l_prefix}/include/popt.h \
        $RPM_BUILD_ROOT%{l_prefix}/include/rpm/popt.h
     #   move C API into custom locations
     mv $RPM_BUILD_ROOT%{l_prefix}/include/rpm \
        $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm
     mv $RPM_BUILD_ROOT%{l_prefix}/lib/librpm* \
        $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/
     #   move rpm tool to custom location
     mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpm \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
     mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpm.8 \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm.8
     #   move rpm2cpio tool to custom location
     mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpm2cpio \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm2cpio
     mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpm2cpio.8 \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm2cpio.8
     #   replace symlinks with hardlinks
     for entry in rpme:rpmi rpmt:rpmb rpmu:rpmi rpmv:rpmq; do
         eval `echo $entry | sed -e 's/^\(.*\):\(.*\)$/dst=\1; src=\2/'`
         rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$dst
         ln $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$src \
            $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$dst
     done
     rm -f $RPM_BUILD_ROOT%{l_prefix}/bin/rpmbuild
     ln $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmb \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmbuild
     mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmbuild.8 \
        $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmbuild.8
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Stripping Down Installation"; set -x
     #   strip RPM installation
     ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/bin/* \
           $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/* >/dev/null 2>&1 || true
     for dir in man/ja man/pl man/ru man/sk src; do
         rm -rf $RPM_BUILD_ROOT%{l_prefix}/$dir >/dev/null 2>&1 || true
     done
     rm -rf $RPM_BUILD_ROOT/var >/dev/null 2>&1 || true
     for file in rpme rpmi rpmsign rpmu rpmverify rpmquery gendiff; do
         rm -f $RPM_BUILD_ROOT%{l_prefix}/bin/$file >/dev/null 2>&1 || true
     done
     rm -rf $RPM_BUILD_ROOT%{l_prefix}/share/* >/dev/null 2>&1 || true
     rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man1/* >/dev/null 2>&1 || true
     rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man3/* >/dev/null 2>&1 || true
     rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/rpmpopt >/dev/null 2>&1 || true
     rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/rpmrc >/dev/null 2>&1 || true
     rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/lib*.la >/dev/null 2>&1 || true
     rm -rf $RPM_BUILD_ROOT%{l_prefix}/var/lib >/dev/null 2>&1 || true
     for file in \
         u_pkg.sh vpkg-provides.sh vpkg-provides2.sh rpmdiff.cgi rpmdiff \
         mkinstalldirs magic.prov magic.req http.req getpo.sh \
         get_magic.pl find-provides find-requires find-requires.perl \
         find-req.pl find-provides.perl find-prov.pl find-lang.sh \
         cpanflute convertrpmrc.sh check-prereqs rpmputtext rpmgettext \
         brp-compress brp-redhat brp-sparc64-linux brp-strip \
         brp-strip-shared brp-strip-comment-note rpmrc \
         config.guess config.sub check-files; do
         rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$file >/dev/null 2>&1 || true
     done
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Install Additional Tools"; set -x
     #   install lsync tool
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE lsync` \
         >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE dot.lsyncrc` \
         >$RPM_BUILD_ROOT%{l_prefix}/local/.lsyncrc
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE lsync.8` \
         >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync.8
     #   install rpm-config tool
     ( l_prefix="%{l_prefix}"
       l_cc="%{l_cc}"
       l_cflags=""
       l_cppflags="-DOPENPKG -I${l_prefix}/include/openpkg/rpm -I${l_prefix}/include/openpkg"
       l_ldflags="-L${l_prefix}/lib/openpkg"
       l_libs="-lrpmbuild -lrpm -lrpmio -lrpmdb -lrpmpopt -lrpmbeecrypt -lrpmbz2 -lrpmz"
       sed -e "s:@l_prefix@:%{l_prefix}:g" \
           -e "s:@l_cc@:$l_cc:g" \
           -e "s:@l_cflags@:$l_cflags:g" \
           -e "s:@l_cppflags@:$l_cppflags:g" \
           -e "s:@l_ldflags@:$l_ldflags:g" \
           -e "s:@l_libs@:$l_libs:g" \
           -e "s:@l_version@:%{V_rpm}:g" \
           <`SOURCE rpm-config.sh` \
           >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config
     ) || exit $?
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config
     sed -e "s:RPM_VERSION:%{V_rpm}:g" \
         <`SOURCE rpm-config.8` \
         >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config.8
     #   install OpenPKG registry commands
     ( cd openpkg-registry-%{V_registry}
       mv  $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm \
           $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpm
       sed -e "s;@l_prefix@;%{l_prefix};g" \
           rpm.sh >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
       chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
       sed -e "s;@l_prefix@;%{l_prefix};g" \
           register.sh >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register
       chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register
       cp register.8 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register.8
     ) || exit $?
     #   install OpenPKG Tool Chain command subset
     ( cd openpkg-tools-%{V_tools}
       cp cmd/curl.sh $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/curl.sh
       cp cmd/build.pl $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.pl
       chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.pl
       cp cmd/build.8 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.8
     ) || exit $?
     #   install RPM extension
     ( cd rpm-%{V_rpm}
       cp file/file $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/file
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/file
     ) || exit $?
     ( cd perl-%{V_perl}
       cp miniperl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/miniperl
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/miniperl
     ) || exit $?
     ( cd openssl-%{V_openssl}
       cp apps/openssl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openssl
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openssl
     ) || exit $?
     ( cd curl-%{V_curl}
       cp src/curl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/curl
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/curl
     ) || exit $?
     ( cd bzip2-%{V_bzip2}
       cp bzip2 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bzip2
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bzip2
     ) || exit $?
     ( cd gzip-%{V_gzip}
       cp gzip $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/gzip
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/gzip
     ) || exit $?
     ( cd patch-%{V_patch}
       cp patch $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/patch
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/patch
     ) || exit $?
     ( cd tar-%{V_tar}
       cp tar $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/tar
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/tar
     ) || exit $?
     ( cd bash-%{V_bash}
       cp bash $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bash
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bash
     ) || exit $?
     ( cd uuid-%{V_uuid}
       cp uuid $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/uuid
       ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/uuid
     ) || exit $?
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         -e "s;@l_musr@;%{l_musr};g" \
         -e "s;@l_mgrp@;%{l_mgrp};g" \
         <`SOURCE uuid.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE uuid.8` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid.8
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE release.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE release.8` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release.8
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         -e "s;@l_musr@;%{l_musr};g" \
         -e "s;@l_mgrp@;%{l_mgrp};g" \
         <`SOURCE rpmdb` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmdb
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmdb
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rpmtool` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmtool
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmtool
     #   install OpenPKG tool chain execution frontend and execution wrapper
     cp openpkg-executable-%{V_exec}/openpkg $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
     ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
     chmod 4775 $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE openpkg.sh` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openpkg
     chmod 755 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openpkg
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE openpkg.1` \
         >$RPM_BUILD_ROOT%{l_prefix}/man/man1/openpkg.1
     #   install more OpenPKG tool chain commands
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE install.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/install
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/install
     sed -e "s;@l_prefix@;%{l_prefix};g" \
         <`SOURCE man.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/man
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/man
     #   install an own copy of shtool
     cp $shtool $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/shtool
     chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/shtool
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Install Configuration Files"; set -x
     #   install a few README files
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE root.README` \
         >$RPM_BUILD_ROOT%{l_prefix}/README
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE local.README` \
         >$RPM_BUILD_ROOT%{l_prefix}/local/README
     #   install Bash environment
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE dot.bashrc` \
         >$RPM_BUILD_ROOT%{l_prefix}/.bashrc
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE dot.bash_login` \
         >$RPM_BUILD_ROOT%{l_prefix}/.bash_login
     #   install Run-Command files
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         -e "s:@l_susr@:%{l_susr}:g" \
         -e "s:@l_musr@:%{l_musr}:g" \
         <`SOURCE rc` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/rc
     chmod 755 $RPM_BUILD_ROOT%{l_prefix}/etc/rc
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rc.conf` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/rc.conf
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.conf
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rc.func` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/rc.func
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.func
     mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         -e "s:@l_musr@:%{l_musr}:g" \
         <`SOURCE rc.openpkg` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/rc.openpkg
     chmod 755 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/rc.openpkg
     ( echo "#!/bin/sh"
       echo "exec %{l_prefix}/etc/rc \${1+\"\$@\"}"
     ) >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc
     chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc
     ln  $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc \
         $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rc
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rc.8` \
         >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc.8
     #   create configuration directory
     test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg || \
         mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg
     #   install platform identification file
     sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-any-%<sp>" \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/platform
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/platform
     #   install UUID configuration file (ghost)
     touch $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/uuid
     chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/uuid
     #   install registry configuration files (ghost)
     touch \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.conf \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.prep \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.tran \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.util
     chmod 644 \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.conf \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.prep \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.tran \
         $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.util
     #   install default managers configuration file
     ( echo "##"
       echo "##  managers -- OpenPKG Instance Managers"
       echo "##"
       echo ""
       echo "%{l_susr}"
       echo "%{l_musr}"
       echo ""
     ) >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/managers
     #   install overriding RPM configuration files
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rpmpopt` \
         >>$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmpopt
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         <`SOURCE rpmrc` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmrc
     sed -e "s:@l_prefix@:%{l_prefix}:g" \
         -e "s:@l_prefix_static@:%{l_prefix}:g" \
         -e "s;@l_build_path@;$l_build_path;g" \
         -e "s;@l_build_ldlp@;$l_build_ldlp;g" \
         -e "s;@l_build_ulim@;$l_build_ulim;g" \
         -e "s:@TAG@:$tag:g" \
         -e "s:@SUSR@:$susr:g" \
         -e "s:@SGRP@:$sgrp:g" \
         -e "s:@MUSR@:$musr:g" \
         -e "s:@MGRP@:$mgrp:g" \
         -e "s:@RUSR@:$rusr:g" \
         -e "s:@RGRP@:$rgrp:g" \
         -e "s:@NUSR@:$nusr:g" \
         -e "s:@NGRP@:$ngrp:g" \
         <`SOURCE rpmmacros` \
         >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmmacros
     cp `SOURCE openpkg.org.pgp` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.org.pgp
     cp `SOURCE openpkg.com.pgp` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.com.pgp
     cp `SOURCE openpkg.net.pgp` \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.net.pgp
     #   display verbosity header
     set +x; VERBOSE "INSTALL: Done. Thank you for flying OpenPKG..."; set -x
 %files
     %defattr(-,%{?l_musr}%{!?l_musr:%{l_fsusr}},%{?l_mgrp}%{!?l_mgrp:%{l_fsgrp}})
     %{l_prefix}/README
     %config(noreplace) %{l_prefix}/.bashrc
     %config(noreplace) %{l_prefix}/.bash_login
     %dir %{l_prefix}/RPM
     %dir %{l_prefix}/RPM/SRC
     %dir %{l_prefix}/RPM/PKG
     %dir %{l_prefix}/RPM/DB
     %dir %{l_prefix}/RPM/TMP
     %dir %{l_prefix}/cgi
     %dir %{l_prefix}/bin
     %attr(4755,%{l_susr},%{l_mgrp}) %{l_prefix}/bin/openpkg
     %dir %{l_prefix}/etc
     %{l_prefix}/etc/rc
     %config(noreplace) %{l_prefix}/etc/rc.conf
     %{l_prefix}/etc/rc.func
     %dir %{l_prefix}/etc/rc.d
     %{l_prefix}/etc/rc.d/rc.openpkg
     %dir %{l_prefix}/etc/openpkg
     %ghost %{l_prefix}/etc/openpkg/uuid
     %config %{l_prefix}/etc/openpkg/platform
     %config %{l_prefix}/etc/openpkg/rpmmacros
     %config %{l_prefix}/etc/openpkg/rpmrc
     %ghost %{l_prefix}/etc/openpkg/register.conf
     %ghost %{l_prefix}/etc/openpkg/register.prep
     %ghost %{l_prefix}/etc/openpkg/register.tran
     %ghost %{l_prefix}/etc/openpkg/register.util
     %config %attr(664,%{l_musr},%{l_mgrp}) %{l_prefix}/etc/openpkg/managers
     %{l_prefix}/etc/openpkg/openpkg.org.pgp
     %{l_prefix}/etc/openpkg/openpkg.com.pgp
     %{l_prefix}/etc/openpkg/openpkg.net.pgp
     %dir %{l_prefix}/include
     %dir %{l_prefix}/include/openpkg
     %dir %{l_prefix}/include/openpkg/rpm
     %{l_prefix}/include/openpkg/rpm/argv.h
     %{l_prefix}/include/openpkg/rpm/beecrypt.h
     %{l_prefix}/include/openpkg/rpm/bzlib.h
     %{l_prefix}/include/openpkg/rpm/db.h
     %{l_prefix}/include/openpkg/rpm/fts.h
     %{l_prefix}/include/openpkg/rpm/glob.h
     %{l_prefix}/include/openpkg/rpm/hdrinline.h
     %{l_prefix}/include/openpkg/rpm/header.h
     %{l_prefix}/include/openpkg/rpm/misc.h
     %{l_prefix}/include/openpkg/rpm/popt.h
     %{l_prefix}/include/openpkg/rpm/rpmal.h
     %{l_prefix}/include/openpkg/rpm/rpmbuild.h
     %{l_prefix}/include/openpkg/rpm/rpmcli.h
     %{l_prefix}/include/openpkg/rpm/rpmdb.h
     %{l_prefix}/include/openpkg/rpm/rpmds.h
     %{l_prefix}/include/openpkg/rpm/rpmerr.h
     %{l_prefix}/include/openpkg/rpm/rpmfc.h
     %{l_prefix}/include/openpkg/rpm/rpmfi.h
     %{l_prefix}/include/openpkg/rpm/rpmfile.h
     %{l_prefix}/include/openpkg/rpm/rpmhash.h
     %{l_prefix}/include/openpkg/rpm/rpmio.h
     %{l_prefix}/include/openpkg/rpm/rpmlib.h
     %{l_prefix}/include/openpkg/rpm/rpmlog.h
     %{l_prefix}/include/openpkg/rpm/rpmmacro.h
     %{l_prefix}/include/openpkg/rpm/rpmmessages.h
     %{l_prefix}/include/openpkg/rpm/rpmpgp.h
     %{l_prefix}/include/openpkg/rpm/rpmps.h
     %{l_prefix}/include/openpkg/rpm/rpmspec.h
     %{l_prefix}/include/openpkg/rpm/rpmsw.h
     %{l_prefix}/include/openpkg/rpm/rpmte.h
     %{l_prefix}/include/openpkg/rpm/rpmts.h
     %{l_prefix}/include/openpkg/rpm/rpmurl.h
     %{l_prefix}/include/openpkg/rpm/stringbuf.h
     %{l_prefix}/include/openpkg/rpm/ugid.h
     %{l_prefix}/include/openpkg/rpm/zconf.h
     %{l_prefix}/include/openpkg/rpm/zlib.h
     %dir %{l_prefix}/info
     %dir %{l_prefix}/lib
     %dir %{l_prefix}/lib/openpkg
     %{l_prefix}/lib/openpkg/bash
     %{l_prefix}/lib/openpkg/bzip2
     %{l_prefix}/lib/openpkg/curl
     %{l_prefix}/lib/openpkg/file
     %{l_prefix}/lib/openpkg/gzip
     %{l_prefix}/lib/openpkg/librpm.a
     %{l_prefix}/lib/openpkg/librpmbeecrypt.a
     %{l_prefix}/lib/openpkg/librpmbuild.a
     %{l_prefix}/lib/openpkg/librpmbz2.a
     %{l_prefix}/lib/openpkg/librpmdb.a
     %{l_prefix}/lib/openpkg/librpmio.a
     %{l_prefix}/lib/openpkg/librpmpopt.a
     %{l_prefix}/lib/openpkg/librpmz.a
     %{l_prefix}/lib/openpkg/macros
     %{l_prefix}/lib/openpkg/magic
     %{l_prefix}/lib/openpkg/magic.mgc
     %{l_prefix}/lib/openpkg/magic.mime
     %{l_prefix}/lib/openpkg/magic.mime.mgc
     %{l_prefix}/lib/openpkg/miniperl
     %{l_prefix}/lib/openpkg/openpkg
     %{l_prefix}/lib/openpkg/openssl
     %{l_prefix}/lib/openpkg/patch
     %{l_prefix}/lib/openpkg/rc
     %{l_prefix}/lib/openpkg/rpm
     %{l_prefix}/lib/openpkg/rpmb
     %{l_prefix}/lib/openpkg/rpmd
     %{l_prefix}/lib/openpkg/rpmdb
     %{l_prefix}/lib/openpkg/rpmdb_dump
     %{l_prefix}/lib/openpkg/rpmdb_load
     %{l_prefix}/lib/openpkg/rpmdb_verify
     %{l_prefix}/lib/openpkg/rpme
     %{l_prefix}/lib/openpkg/rpmi
     %{l_prefix}/lib/openpkg/rpmk
     %{l_prefix}/lib/openpkg/rpmpopt
     %{l_prefix}/lib/openpkg/rpmq
     %{l_prefix}/lib/openpkg/rpmt
     %{l_prefix}/lib/openpkg/rpmtool
     %{l_prefix}/lib/openpkg/rpmu
     %{l_prefix}/lib/openpkg/rpmv
     %{l_prefix}/lib/openpkg/shtool
     %{l_prefix}/lib/openpkg/tar
     %{l_prefix}/lib/openpkg/uuid
     %dir %{l_prefix}/libexec
     %dir %{l_prefix}/libexec/openpkg
     %{l_prefix}/libexec/openpkg/build.8
     %{l_prefix}/libexec/openpkg/build.pl
     %{l_prefix}/libexec/openpkg/curl.sh
     %{l_prefix}/libexec/openpkg/install
     %{l_prefix}/libexec/openpkg/lsync
     %{l_prefix}/libexec/openpkg/lsync.8
     %{l_prefix}/libexec/openpkg/man
     %{l_prefix}/libexec/openpkg/rc
     %{l_prefix}/libexec/openpkg/rc.8
     %{l_prefix}/libexec/openpkg/register
     %{l_prefix}/libexec/openpkg/register.8
     %{l_prefix}/libexec/openpkg/release
     %{l_prefix}/libexec/openpkg/release.8
     %{l_prefix}/libexec/openpkg/rpm
     %{l_prefix}/libexec/openpkg/rpm-config
     %{l_prefix}/libexec/openpkg/rpm-config.8
     %{l_prefix}/libexec/openpkg/rpm.8
     %{l_prefix}/libexec/openpkg/rpm2cpio
     %{l_prefix}/libexec/openpkg/rpm2cpio.8
     %{l_prefix}/libexec/openpkg/rpmbuild
     %{l_prefix}/libexec/openpkg/rpmbuild.8
     %{l_prefix}/libexec/openpkg/uuid
     %{l_prefix}/libexec/openpkg/uuid.8
     %dir %{l_prefix}/man
     %dir %{l_prefix}/man/man1
     %dir %{l_prefix}/man/man2
     %dir %{l_prefix}/man/man3
     %dir %{l_prefix}/man/man4
     %dir %{l_prefix}/man/man5
     %dir %{l_prefix}/man/man6
     %dir %{l_prefix}/man/man7
     %dir %{l_prefix}/man/man8
     %dir %{l_prefix}/man/man9
     %dir %{l_prefix}/man/cat1
     %dir %{l_prefix}/man/cat2
     %dir %{l_prefix}/man/cat3
     %dir %{l_prefix}/man/cat4
     %dir %{l_prefix}/man/cat5
     %dir %{l_prefix}/man/cat6
     %dir %{l_prefix}/man/cat7
     %dir %{l_prefix}/man/cat8
     %dir %{l_prefix}/man/cat9
     %{l_prefix}/man/man1/openpkg.1
     %dir %{l_prefix}/sbin
     %dir %{l_prefix}/pub
     %dir %{l_prefix}/share
     %dir %{l_prefix}/var
     %dir %{l_prefix}/local
     %{l_prefix}/local/README
     %{l_prefix}/local/.lsyncrc
     %dir %{l_prefix}/local/PKG
     %dir %{l_prefix}/local/bin
     %dir %{l_prefix}/local/etc
     %dir %{l_prefix}/local/include
     %dir %{l_prefix}/local/info
     %dir %{l_prefix}/local/lib
     %dir %{l_prefix}/local/man
     %dir %{l_prefix}/local/man/man1
     %dir %{l_prefix}/local/man/man2
     %dir %{l_prefix}/local/man/man3
     %dir %{l_prefix}/local/man/man4
     %dir %{l_prefix}/local/man/man5
     %dir %{l_prefix}/local/man/man6
     %dir %{l_prefix}/local/man/man7
     %dir %{l_prefix}/local/man/man8
     %dir %{l_prefix}/local/man/man9
     %dir %{l_prefix}/local/man/cat1
     %dir %{l_prefix}/local/man/cat2
     %dir %{l_prefix}/local/man/cat3
     %dir %{l_prefix}/local/man/cat4
     %dir %{l_prefix}/local/man/cat5
     %dir %{l_prefix}/local/man/cat6
     %dir %{l_prefix}/local/man/cat7
     %dir %{l_prefix}/local/man/cat8
     %dir %{l_prefix}/local/man/cat9
     %dir %{l_prefix}/local/sbin
 %clean
     #   skip in bootstrap phase 2 (see openpkg.boot)
     [ ".$OPENPKG_BOOT" = .1 ] && exit 0
     #   cleanup build area
     rm -rf openpkg-%{version} >/dev/null 2>&1 || true
     #   cleanup installation area
     rm -rf $RPM_BUILD_ROOT >/dev/null 2>&1 || true
 %pre
     #   always performed for upgrades and because it doesn't harm!
     #   [ ".$1" != .1 ] && exit 0
     #   this procedure is only usable with root privileges
     #   (for non-root installations it is not required at all)
     cusr=`(id -un) 2>/dev/null ||\
           (id | sed -e 's;^[^(]*(\([^)]*\)).*;\1;') 2>/dev/null ||\
           (whoami) 2>/dev/null ||\
           (who am i | cut "-d " -f1) 2>/dev/null ||\
           echo $LOGNAME`
     #   determine runtime details (for both inside and outside RPM!!)
     #   - bootstrapping: $xxx is set from aux.wrapbin.sh
     #   - upgrading new: %{l_[smrn]{usr,grp}} is set via rpmmacros
     #   - upgrading old: %{l_[smrn]{usr,grp}} is not set at all
     [ ".$susr" = . ] && susr="%{?l_susr}%{!?l_susr:root}"
     [ ".$sgrp" = . ] && sgrp="%{?l_sgrp}%{!?l_sgrp:wheel}"
     [ ".$musr" = . ] && musr="%{?l_musr}%{!?l_musr:%{l_fsusr}}"
     [ ".$mgrp" = . ] && mgrp="%{?l_mgrp}%{!?l_mgrp:%{l_fsgrp}}"
     [ ".$rusr" = . ] && rusr="%{?l_rusr}%{!?l_rusr:%{l_fsusr}-r}"
     [ ".$rgrp" = . ] && rgrp="%{?l_rgrp}%{!?l_rgrp:%{l_fsgrp}-r}"
     [ ".$nusr" = . ] && nusr="%{?l_nusr}%{!?l_nusr:%{l_fsusr}-n}"
     [ ".$ngrp" = . ] && ngrp="%{?l_ngrp}%{!?l_ngrp:%{l_fsgrp}-n}"
     [ ".$suid" = . ] && suid="%{?l_suid}"
     [ ".$sgid" = . ] && sgid="%{?l_sgid}"
     [ ".$muid" = . ] && muid="%{?l_muid}"
     [ ".$mgid" = . ] && mgid="%{?l_mgid}"
     [ ".$ruid" = . ] && ruid="%{?l_ruid}"
     [ ".$rgid" = . ] && rgid="%{?l_rgid}"
     [ ".$nuid" = . ] && nuid="%{?l_nuid}"
     [ ".$ngid" = . ] && ngid="%{?l_ngid}"
     #   if any of these optional params are not used we won't have a
     #   corresponding macro either, so make use of one conditionally
     [ ".$suid" = . ] && [ ".%{?l_suid:set}" = .set ] && suid="%{?l_suid}"
     [ ".$sgid" = . ] && [ ".%{?l_sgid:set}" = .set ] && sgid="%{?l_sgid}"
     [ ".$muid" = . ] && [ ".%{?l_muid:set}" = .set ] && muid="%{?l_muid}"
     [ ".$mgid" = . ] && [ ".%{?l_mgid:set}" = .set ] && mgid="%{?l_mgid}"
     [ ".$ruid" = . ] && [ ".%{?l_ruid:set}" = .set ] && ruid="%{?l_ruid}"
     [ ".$rgid" = . ] && [ ".%{?l_rgid:set}" = .set ] && rgid="%{?l_rgid}"
     [ ".$nuid" = . ] && [ ".%{?l_nuid:set}" = .set ] && nuid="%{?l_nuid}"
     [ ".$ngid" = . ] && [ ".%{?l_ngid:set}" = .set ] && ngid="%{?l_ngid}"
     #   determine prefix
     [ ".$prefix" = . ] && prefix="%{l_prefix}"
     prefix=`echo "$prefix" | sed -e 's;//*;/;g' -e 's;/$;;'`
     #   register instance in presence file
     presence="/etc/openpkg"
     exists=`cat $presence 2>/dev/null | egrep "^ *${prefix} *\$"`
     if [ ".$exists" = . ]; then
         ( umask 022
           echo "${prefix}" >>$presence
         ) 2>/dev/null || true
     fi
     #   determine user/group ids
     for class in s m r n; do
         eval "xusr=\"\$${class}usr\""
         eval "xgrp=\"\$${class}grp\""
         eval "xuid=\"\$${class}uid\""
         eval "xgid=\"\$${class}gid\""
         if [ ".$xuid" = . ]; then
             xuid=`(getent passwd "${xusr}"; \
                    grep "^${xusr}:" /etc/passwd; \
                    ypmatch "${xusr}" passwd; \
                    nismatch "${xusr}" passwd; \
                    nidump passwd . | grep "^${xusr}:") 2>/dev/null | \
                    sed -e 'q' | awk -F: '{ print $3; }'`
             if [ ".$xuid" = . ]; then
                 #   seek for a reasonably uid/gid pair
                 xuid=1000
                 ok=0
                 while [ ".$ok" = .0 ]; do
                     eval "u_exists=\$u_exists_$xuid"
                     if [ ".$u_exists" = . ]; then
                         u_exists=`(getent passwd; cat /etc/passwd; ypcat passwd; niscat passwd; nidump passwd .) 2>/dev/null |\
                                   grep "^[^:]*:[^:]*:$xuid:"`
                     fi
                     eval "g_exists=\$g_exists_$xuid"
                     if [ ".$g_exists" = . ]; then
                         g_exists=`(getent group; cat /etc/group; ypcat group; niscat group; nidump group .) 2>/dev/null |\
                                   grep "^[^:]*:[^:]*:$xuid:"`
                     fi
                     if [ ".$u_exists" = . -a ".$g_exists" = . ]; then
                         ok=1
                         break
                     fi
                     xuid=`expr $xuid + 1`
                 done
                 eval "u_exists_$xuid=yes"
                 eval "g_exists_$xuid=yes"
             fi
         fi
         if [ ".$xgid" = . ]; then
             xgid=`(getent group "${xgrp}"; \
                   grep "^${xgrp}:" /etc/group; \
                   ypmatch "${xgrp}" group; \
                   nismatch "${xgrp}" group; \
                   nidump group . | grep "^${xgrp}:") 2>/dev/null | \
                   sed -e 'q' | awk -F: '{ print $3; }'`
             if [ ".$xgid" = . ]; then
                 xgid="$xuid"
             fi
         fi
         eval "${class}uid=\"$xuid\""
         eval "${class}gid=\"$xgid\""
     done
     #   determine platform id
     s=`(uname -s) 2>/dev/null` || s='Unknown'
     r=`(uname -r) 2>/dev/null` || r='0.0'
     plid="${s}/${r}"
     #   add entry to /etc/shells
     shell="${prefix}/lib/openpkg/bash"
     if [ -f /etc/shells ]; then
         exists=`cat /etc/shells 2>/dev/null | grep "^$shell"`
         if [ ".$exists" = . ]; then
             if [ ".$cusr" != ".root" ]; then
                 echo "openpkg:WARNING: skipping addition of $shell to /etc/shells" 1>&2
                 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
             else
                 echo "${shell}" >>/etc/shells
             fi
         fi
     fi
     #   clear pending deferred actions
     rm -f %{l_prefix}.pre-group-process.sh %{l_prefix}.pre-post-process.sh >/dev/null 2>&1
     #   create the hierarchy user/group
     for req in "superuser:${susr}:${suid}:${sgrp}:${sgid}" \
                "management:${musr}:${muid}:${mgrp}:${mgid}" \
                "restricted:${rusr}:${ruid}:${rgrp}:${rgid}" \
                "non-privileged:${nusr}:${nuid}:${ngrp}:${ngid}"; do
         #   split request into class/usr/uid/grp/gid
         OIFS="$IFS"; IFS=":"; set -- $req; IFS="$OIFS"
         class="$1"; usr="$2"; uid="$3"; grp="$4"; gid="$5"
         #   check whether user already exists
         exists=`(getent passwd "$usr"; \
                  grep "^$usr:" /etc/passwd; \
                  ypmatch "$usr" passwd; \
                  nismatch "$usr" passwd; \
                  nidump passwd . | grep "^$usr:") 2>/dev/null | \
                  sed -e 'q'`
         if [ ".$exists" = . ]; then
             if [ ".$cusr" != ".root" ]; then
                 echo "openpkg:WARNING: skipping creation of OpenPKG $class user $usr" 1>&2
                 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
             else
                 #   add entry to passwd database
                 realname="${prefix} OpenPKG ($class)"
                 case "$plid" in
                     FreeBSD/* | NetBSD/* )
                         file=/etc/master.passwd
                         entry="${usr}:*:${uid}:${gid}::0:0:${realname}:${prefix}:${shell}"
                         update="(PATH=\$PATH:/usr/sbin; pwd_mkdb -p /etc/master.passwd)"
                         ;;
                     Linux/* )
                         file=/etc/passwd
                         entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
                         update="(PATH=\$PATH:/usr/sbin; pwconv)"
                         ;;
                     SunOS/5.* | UnixWare/* )
                         file=/etc/passwd
                         entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
                         update="(PATH=\$PATH:/usr/sbin; pwconv)"
                         ;;
                     AIX/* )
                         #   intentionally do nothing here
                         :
                         ;;
                     OSF1/V5.* )
                         file=/etc/passwd
                         entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
                         update="(PATH=\$PATH:/usr/sbin; mkpasswd /etc/passwd)"
                         ;;
                     HP-UX/* )
                         file=/etc/passwd
                         entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
                         update=":"
                         ;;
                     Darwin/* )
                         #   intentionally do nothing here
                         :
                         ;;
                     IRIX*/6.* )
                         file=/etc/passwd
                         entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
                         if   [ -f /etc/shadow ]
                         then update="(PATH=\$PATH:/sbin; pwconv)"
                         else update=":"
                         fi
                         ;;
                 esac
                 case "$plid" in
                     Darwin/* )
                         niutil -create     . "/users/${usr}"
                         niutil -createprop . "/users/${usr}" passwd   "*"
                         niutil -createprop . "/users/${usr}" uid      "${uid}"
                         niutil -createprop . "/users/${usr}" gid      "${gid}"
                         niutil -createprop . "/users/${usr}" realname "${realname}"
                         niutil -createprop . "/users/${usr}" home     "${prefix}"
                         niutil -createprop . "/users/${usr}" shell    "${shell}"
                         ;;
                     AIX/* )
                         mkuser id="${uid}" gecos="${realname}" home="${prefix}" "${usr}"
                         cp /etc/security/login.cfg /etc/security/login.cfg.bak && \
                         sed -e "/^usw:/,/^[^ ]/s;\\( *shells =.*\\) *\$;\\1,$shell;" \
                             </etc/security/login.cfg.bak >/etc/security/login.cfg && \
                         rm -f /etc/security/login.cfg.bak >/dev/null 2>&1
                         #   defer both the setting of the primary group and the shell,
                         #   as they do not exist at this stage of processing.
                         echo "chuser pgrp=\"${grp}\" \"${usr}\"" >>%{l_prefix}.pre-group-process.sh
                         echo "chuser shell=\"${shell}\" \"${usr}\"" >>%{l_prefix}.pre-post-process.sh
                         ;;
                     * )
                         cp $file $file.bak && \
                         (grep -v '^+:' $file.bak; echo $entry; grep '^+:' $file.bak) >$file
                         rm -f $file.bak >/dev/null 2>&1
                         eval $update
                         [ $? -ne 0 ] && exit $?
                         ;;
                 esac
             fi
         fi
         #   check whether group already exists
         exists=`(getent group "$grp"; \
                 grep "^$grp:" /etc/group; \
                 ypmatch "$grp" group; \
                 nismatch "$grp" group; \
                 nidump group . | grep "^$grp:") 2>/dev/null | \
                 sed -e 'q'`
         if [ ".$exists" = . ]; then
             if [ ".$cusr" != ".root" ]; then
                 echo "openpkg:WARNING: skipping creation of OpenPKG $class group $grp" 1>&2
                 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
             else
                 case "$plid" in
                     Darwin/* )
                         niutil -create     . "/groups/${grp}"
                         niutil -createprop . "/groups/${grp}" gid   "${gid}"
                         niutil -createprop . "/groups/${grp}" users "${usr}"
                         ;;
                     AIX/* )
                         mkgroup id="${gid}" users="${usr}" "${grp}"
                         ;;
                     * )
                         #   add entry to group database
                         file=/etc/group
                         entry="${grp}:*:${gid}:${usr}"
                         cp $file $file.bak && \
                         (grep -v '^+:' $file.bak; echo $entry; grep '^+:' $file.bak) >$file
                         rm -f $file.bak >/dev/null 2>&1
                     ;;
                 esac
             fi
         fi
     done
     #   optional group processing (deferred adjustment of primary group)
     if [ -f %{l_prefix}.pre-group-process.sh ]; then
         sh %{l_prefix}.pre-group-process.sh
         rm -f %{l_prefix}.pre-group-process.sh
     fi
     #   invalidate passwd and group tables from Name Service Cache Daemon to
     #   ensure chown/chgrp works immediately after pwconv on Linux and Solaris
     if [ -x /usr/sbin/nscd ]; then
         /usr/sbin/nscd -i passwd >/dev/null 2>&1 || true
         /usr/sbin/nscd -i group >/dev/null 2>&1 || true
     fi
     #   create the startup/shutdown transfer script
     name=`echo "$prefix" | sed -e 's;/;;g'`
     if [ ".$cusr" != ".root" ]; then
         echo "openpkg:WARNING: skipping creation of system run-command hooks" 1>&2
         echo "openpkg:WARNING: (would require root-privileges)" 1>&2
     else
         case "$plid" in
             FreeBSD/* )
                 if [ ! -f /etc/rc.d/openpkg-${name} ]; then
                     #   install transfer script
                     rm -f /etc/rc.d/openpkg-${name} >/dev/null 2>&1
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  openpkg-${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "# PROVIDE: openpkg-${name}"
                       echo "# REQUIRE: LOGIN"
                       echo "# KEYWORD: shutdown"
                       echo ""
                       echo ". /etc/rc.subr"
                       echo ""
                       echo "name=\"openpkg_${name}\""
                       echo "start_cmd=\"openpkg_rc_all start\""
                       echo "stop_cmd=\"openpkg_rc_all stop\""
                       echo "restart_cmd=\"openpkg_rc_all stop start\""
                       echo ""
                       echo "openpkg_rc_all () {"
                       echo "    if [ -f ${prefix}/etc/rc ]; then"
                       echo "        ${prefix}/etc/rc all \"\$@\""
                       echo "    fi"
                       echo "}"
                       echo ""
                       echo "load_rc_config \$name"
                       echo "run_rc_command \"\$1\""
                       echo ""
                     ) >/etc/rc.d/openpkg-${name}
                     chmod 755 /etc/rc.d/openpkg-${name}
                 fi
                 ;;
             NetBSD/* )
                 if [ ! -f /etc/rc.d/${name} ]; then
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo "##  PROVIDE: ${name}"
                       echo "##  REQUIRE: DAEMON LOGIN NETWORK SERVERS"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
                       echo "case \$1 in"
                       echo "    start   ) exec ${prefix}/etc/rc all start ;;"
                       echo "    stop    ) exec ${prefix}/etc/rc all stop  ;;"
                       echo "    restart ) exec ${prefix}/etc/rc all stop start ;;"
                       echo "    status  ) ;;"
                       echo "esac"
                     ) >/etc/rc.d/${name}
                     chmod 755 /etc/rc.d/${name}
                 fi
                 ;;
             Linux/* )
                 if [ -f /etc/gentoo-release ]; then
                     if [ ! -f /etc/init.d/openpkg-${name} ]; then
                         #   install transfer script
                         ( echo "#!/sbin/runscript"
                           echo "##"
                           echo "##  openpkg-${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                           echo "##"
                           echo ""
                           echo "depend() {"
                           echo "    after *"
                           echo "}"
                           echo ""
                           echo "checkconfig() {"
                           echo "    [ -f ${prefix}/etc/rc ] || return 1"
                           echo "    case $1 in"
                           echo "        start ) exec ${prefix}/etc/rc all start ;;"
                           echo "        stop  ) exec ${prefix}/etc/rc all stop  ;;"
                           echo "    esac"
                           echo "}"
                           echo ""
                           echo "start() {"
                           echo "    checkconfig || return 1"
                           echo "    ebegin "Starting OpenPKG ${prefix} hierarchy""
                           echo "    exec ${prefix}/etc/rc all start"
                           echo "    eend 0"
                           echo "}"
                           echo ""
                           echo "stop() {"
                           echo "    checkconfig || return 1"
                           echo "    ebegin "Stopping OpenPKG ${prefix} hierarchy""
                           echo "    exec ${prefix}/etc/rc all stop"
                           echo "    eend 0"
                           echo "}"
                         ) >/etc/init.d/openpkg-${name}
                         chmod 755 /etc/init.d/openpkg-${name}
                         /sbin/rc-update add openpkg-${name} default
                     fi
                 else
                     #   sroot: script root directory
                     #   lroot: link   root directory
                     if [ -f /etc/debian_version ]; then
                         sroot=/etc/init.d
                         lroot=/etc/rc%d.d
                     elif [ -f /etc/redhat-release -o -f /etc/mandrake-release ]; then
                         sroot=/etc/rc.d/init.d
                         lroot=/etc/rc.d/rc%d.d
                     elif [ -f /etc/SuSE-release ]; then
                         sroot=/etc/init.d
                         lroot=/etc/init.d/rc%d.d
                     elif [ -f /etc/slackware-version ]; then
                         sroot=/etc/rc.d
                         lroot=/etc/rc.d/rc%d.d
                         name="rc.${name}"
                         for i in 0 1 2 3 4 5 6; do
                             l=`echo $lroot | sed -e "s;%d;$i;"`
                             if [ ! -d $l ]; then
                                 mkdir $l 2>&1 || true
                             fi
                         done
                     else
                         echo "WARNING: you are not running one of the supported standard" 1>&2
                         echo "WARNING: Linux platforms (Debian, RedHat, Mandrake, SuSE, Gentoo)."   1>&2
                         echo "WARNING: Guessing the location of the system init scripts!" 1>&2
                         sroot=""
                         lroot=""
                         for sr in /etc/rc.d/init.d /etc/init.d /sbin/init.d; do
                             if [ -d $sr ]; then
                                 sroot="$sr"
                                 break
                             fi
                         done
                         for lr in /etc/rc.d/rc2.d /etc/rc2.d /sbin/init.d/rc2.d; do
                             if [ -d $lr ]; then
                                 lroot="`echo $lr | sed -e 's;2;%d;'`"
                                 break
                             fi
                         done
                         if [ ".$sroot" = . -o ".$lroot" = . ]; then
                             echo "ERROR: Failed to guess the location of the system init scripts!" 1>&2
                             exit 1
                         fi
                     fi
                     if [ ! -f $sroot/${name} ]; then
                         #   install transfer script
                         ( echo "#!/bin/sh"
                           echo "##"
                           echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                           echo "##"
                           echo ""
                           echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
                           echo "case \$1 in"
                           echo "    start ) exec ${prefix}/etc/rc all start ;;"
                           echo "    stop  ) exec ${prefix}/etc/rc all stop  ;;"
                           echo "esac"
                         ) >$sroot/${name}
                         chmod 755 $sroot/${name}
                         #   create corresponding symbolic links
                         for i in 2 3 4 5; do
                             ln -s $sroot/${name} `echo $lroot | sed -e "s;%d;$i;"`/S99${name}
                         done
                         for i in 0 1 6; do
                             ln -s $sroot/${name} `echo $lroot | sed -e "s;%d;$i;"`/K00${name}
                         done
                     fi
                 fi
                 ;;
             SunOS/5.1* )
                 if [ ! -d /var/svc/manifest/openpkg ]; then
                     mkdir /var/svc/manifest/openpkg
                 fi
                 if [ ! -f /var/svc/manifest/openpkg/${name}.xml ]; then
                     #   install SMF manifest
                     ( echo "<?xml version=\"1.0\"?>"
                       echo "<!DOCTYPE service_bundle SYSTEM \"/usr/share/lib/xml/dtd/service_bundle.dtd.1\">"
                       echo "<service_bundle type='manifest' name='OpenPKG:${name}'>"
                       echo "    <service"
                       echo "        name='openpkg/${name}'"
                       echo "        type='service'"
                       echo "        version='1'>"
                       echo "        <single_instance />"
                       echo "        <dependency"
                       echo "            name='filesystem'"
                       echo "            type='service'"
                       echo "            grouping='require_all'"
                       echo "            restart_on='none'>"
                       echo "            <service_fmri value='svc:/system/filesystem/local' />"
                       echo "        </dependency>"
                       echo "        <dependency"
                       echo "            name='name-services'"
                       echo "            type='service'"
                       echo "            grouping='require_all'"
                       echo "            restart_on='none'>"
                       echo "            <service_fmri value='svc:/milestone/name-services' />"
                       echo "        </dependency>"
                       echo "        <dependency"
                       echo "            name='multi-user-server'"
                       echo "            type='service'"
                       echo "            grouping='require_all'"
                       echo "            restart_on='none'>"
                       echo "            <service_fmri value='svc:/milestone/multi-user-server' />"
                       echo "        </dependency>"
                       echo "        <dependency"
                       echo "            name='network'"
                       echo "            type='service'"
                       echo "            grouping='require_all'"
                       echo "            restart_on='none'>"
                       echo "            <service_fmri value='svc:/milestone/network' />"
                       echo "        </dependency>"
                       echo "        <exec_method"
                       echo "            type='method'"
                       echo "            name='start'"
                       echo "            exec='${prefix}/etc/rc all start'"
                       echo "            timeout_seconds='180'>"
                       echo "            <method_context>"
                       echo "                <method_credential user='root' group='root' />"
                       echo "            </method_context>"
                       echo "        </exec_method>"
                       echo "        <exec_method"
                       echo "            type='method'"
                       echo "            name='stop'"
                       echo "            exec='${prefix}/etc/rc all stop'"
                       echo "            timeout_seconds='180'>"
                       echo "        </exec_method>"
                       echo "        <property_group name='startd' type='framework'>"
                       echo "            <propval"
                       echo "                name='ignore_error'"
                       echo "                type='astring'"
                       echo "                value='core,signal' />"
                       echo "        </property_group>"
                       echo "        <property_group name='startd' type='framework'>"
                       echo "            <propval"
                       echo "                name='duration'"
                       echo "                type='astring'"
                       echo "                value='transient' />"
                       echo "        </property_group>"
                       echo "        <property_group name='general' type='framework'>"
                       echo "            <propval"
                       echo "                name='action_authorization'"
                       echo "                type='astring'"
                       echo "                value='solaris.smf.manage.openpkg.${name}' />"
                       echo "        </property_group>"
                       echo "        <instance name='default' enabled='false' />"
                       echo "        <stability value='Unstable' />"
                       echo "        <template>"
                       echo "            <common_name>"
                       echo "                <loctext xml:lang='C'>OpenPKG Instance ${prefix}</loctext>"
                       echo "            </common_name>"
                       echo "        </template>"
                       echo "    </service>"
                       echo "</service_bundle>"
                     ) >/var/svc/manifest/openpkg/${name}.xml
                     chmod 644 /var/svc/manifest/openpkg/${name}.xml
                     /usr/sbin/svccfg import /var/svc/manifest/openpkg/${name}.xml
                     ( echo "/usr/sbin/svcadm enable \"svc:/openpkg/${name}:default\""
                     ) >%{l_prefix}.pre-post-process.sh
                 fi
                 ;;
             SunOS/5.* )
                 if [ ! -f /etc/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/etc/rc all start ;;"
                       echo "    stop  ) exec ${prefix}/etc/rc all stop  ;;"
                       echo "esac"
                     ) >/etc/init.d/${name}
                     chmod 755 /etc/init.d/${name}
                     #   create corresponding symbolic links
                     ( cd /etc
                       ln init.d/${name} rc3.d/S99${name}
                       ln init.d/${name} rc0.d/K00${name}
                       ln init.d/${name} rc1.d/K00${name}
                     ) || exit $?
                 fi
                 ;;
             UnixWare/* )
                 if [ ! -f /etc/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/etc/rc all start ;;"
                       echo "    stop  ) exec ${prefix}/etc/rc all stop  ;;"
                       echo "esac"
                     ) >/etc/init.d/${name}
                     chmod 755 /etc/init.d/${name}
                     #   create corresponding symbolic links
                     ( cd /etc
                       ln init.d/${name} rc2.d/S99${name}
                       ln init.d/${name} rc0.d/K00${name}
                       ln init.d/${name} rc1.d/K00${name}
                     ) || exit $?
                 fi
                 ;;
             AIX/* )
                 if [ ! -f /etc/rc.d/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/etc/rc all start ;;"
                       echo "    stop  ) exec ${prefix}/etc/rc all stop  ;;"
                       echo "esac"
                     ) >/etc/rc.d/init.d/${name}
                     chmod 755 /etc/rc.d/init.d/${name}
                     #   create corresponding symbolic links
                     ( cd /etc/rc.d
                       ln -s ../init.d/${name} rc2.d/S99${name}
                     ) || exit $?
                 fi
                 ;;
             OSF1/V5.* )
                 if [ ! -f /sbin/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/etc/rc all start ;;"
                       echo "    stop  ) exec ${prefix}/etc/rc all stop  ;;"
                       echo "esac"
                     ) >/sbin/init.d/${name}
                     chmod 755 /sbin/init.d/${name}
                     #   create corresponding symbolic links
                     ( cd /sbin
                       ln -s ../init.d/${name} rc3.d/S99${name}
                       ln -s ../init.d/${name} rc0.d/K00${name}
                     ) || exit $?
                 fi
                 ;;
             HP-UX/* )
                 if [ ! -f /sbin/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/etc/rc all start ;;"
                       echo "    stop  ) exec ${prefix}/etc/rc all stop  ;;"
                       echo "esac"
                     ) >/sbin/init.d/${name}
                     chmod 755 /sbin/init.d/${name}
                     #   create corresponding symbolic links
                     ( cd /sbin
                       ln -s ../init.d/${name} rc2.d/S900${name}
                       ln -s ../init.d/${name} rc1.d/K100${name}
                     ) || exit $?
                 fi
                 ;;
             Darwin/* )
                 darwin_rc_dir="/System/Library/StartupItems/${name}"
                 if [ ! -d ${darwin_rc_dir} ]; then
                     mkdir ${darwin_rc_dir}
                 fi
                 #   make sure hierarchy is activated in /etc/hostconfig
                 #   FIXME: cs: simple and bad code here without any detection of existing entries
                 echo "OPENPKG_${name}=-YES-" >>/etc/hostconfig
                 #   install transfer script
                 if [ ! -f ${darwin_rc_dir}/${name} ]; then
                     rm -f ${darwin_rc_dir}/${name} >/dev/null 2>&1
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${darwin_rc_dir}/${name}"
                       echo "##      -- startup transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
                       echo ""
                       echo ". /etc/rc.common"
                       echo ""
                       echo "if [ \"\${OPENPKG_${name}:=-NO-}\" = \"-YES-\" ]; then"
                       echo "    ConsoleMessage \"OpenPKG ${prefix} hierarchy\""
                       echo "    ${prefix}/etc/rc all start"
                       echo "fi"
                     ) >${darwin_rc_dir}/${name}
                     chmod 755 ${darwin_rc_dir}/${name}
                 fi
                 #   install startup parameter list
                 if [ ! -f ${darwin_rc_dir}/StartupParameters.plist ]; then
                     rm -f ${darwin_rc_dir}/StartupParameters.plist >/dev/null 2>&1
                     ( echo "{"
                       echo "  Description     = \"OpenPKG ${prefix} hierarchy\";"
                       echo "  Provides        = (\"OpenPKG ${prefix}\");"
                       echo "  Requires        = (\"Disks\", \"Network Configuration\", \"Resolver\");"
                       echo "  Uses            = (\"Cron\");"
                       echo "  OrderPreference = \"Last\";"
                       echo "  Messages ="
                       echo "  {"
                       echo "    start = \"Starting OpenPKG ${prefix} hierarchy\";"
                       echo "    stop  = \"Stopping OpenPKG ${prefix} hierarchy\";"
                       echo "  };"
                       echo "}"
                     ) >${darwin_rc_dir}/StartupParameters.plist
                     chmod 644 ${darwin_rc_dir}/StartupParameters.plist
                 fi
                 ;;
             IRIX*/6.* )
                 if [ ! -f /etc/init.d/${name} ]; then
                     #   install transfer script
                     ( echo "#!/bin/sh"
                       echo "##"
                       echo "##  ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
                       echo "##"
                       echo ""
                       echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
                       echo "case \$1 in"
                       echo "    start ) exec ${prefix}/etc/rc all start ;;"
                       echo "    stop  ) exec ${prefix}/etc/rc all stop  ;;"
                       echo "esac"
                     ) >/etc/init.d/${name}
                     chmod 755 /etc/init.d/${name}
                     #   create corresponding links
                     ( cd /etc
                       ln -f init.d/${name} rc2.d/S99${name}
                       ln -f init.d/${name} rc0.d/K00${name}
                     ) || exit $?
                 fi
                 ;;
         esac
     fi
     #   create the cron transfer entries
     if [ ".$cusr" != ".root" ]; then
         echo "openpkg:WARNING: skipping creation of system cron hooks" 1>&2
         echo "openpkg:WARNING: (would require root-privileges)" 1>&2
     else
         case "$plid" in
             FreeBSD/* | Linux/* | Darwin/* )
                 if [ -f /etc/slackware-version ]; then
                     exists=`crontab -l | grep "$prefix/etc/rc"`
                     if [ ".$exists" = . ]; then
                         EDITOR=/tmp/vipw.$$
                         VISUAL="$EDITOR"
                         export EDITOR
                         export VISUAL
                         ( echo "#!/bin/sh"
                           echo "(   echo \"# <OpenPKG prefix=$prefix pkg=openpkg>\""
                           echo "    echo \"# chronological tasks of ${prefix} OpenPKG hierarchy\""
                           echo "    echo \"0          0  1  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all monthly\""
                           echo "    echo \"0          0  *  *  0  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all weekly\""
                           echo "    echo \"0          0  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all daily\""
                           echo "    echo \"0          *  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all hourly\""
                           echo "    echo \"0,15,30,45 *  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all quarterly\""
                           echo "    echo \"# </OpenPKG>\""
                           echo ") >>\$1"
                         ) >$EDITOR
                         chmod a+x $EDITOR
                         ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
                         rm -f $EDITOR
                     fi
                 else
                     exists=`grep "$prefix/etc/rc" /etc/crontab`
                     if [ ".$exists" = . ]; then
                         ( echo "# <OpenPKG prefix=$prefix pkg=openpkg>"
                           echo "# chronological tasks of ${prefix} OpenPKG hierarchy"
                           echo "0    0  1  *  *  root  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all monthly"
                           echo "0    0  *  *  0  root  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all weekly"
                           echo "0    0  *  *  *  root  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all daily"
                           echo "0    *  *  *  *  root  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all hourly"
                           echo "*/15 *  *  *  *  root  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all quarterly"
                           echo "# </OpenPKG>"
                         ) >>/etc/crontab
                     fi
                 fi
                 ;;
             SunOS/5.* | OSF1/V5.* | NetBSD/* | HP-UX/* | UnixWare/* | AIX/* )
                 exists=`crontab -l | grep "$prefix/etc/rc"`
                 if [ ".$exists" = . ]; then
                     EDITOR=/tmp/vipw.$$
                     VISUAL="$EDITOR"
                     export EDITOR
                     export VISUAL
                     ( echo "#!/bin/sh"
                       echo "(   echo \"# <OpenPKG prefix=$prefix pkg=openpkg>\""
                       echo "    echo \"# chronological tasks of ${prefix} OpenPKG hierarchy\""
                       echo "    echo \"0          0  1  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all monthly\""
                       echo "    echo \"0          0  *  *  0  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all weekly\""
                       echo "    echo \"0          0  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all daily\""
                       echo "    echo \"0          *  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all hourly\""
                       echo "    echo \"0,15,30,45 *  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all quarterly\""
                       echo "    echo \"# </OpenPKG>\""
                       echo ") >>\$1"
                     ) >$EDITOR
                     chmod a+x $EDITOR
                     ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
                     rm -f $EDITOR
                 fi
                 ;;
             IRIX*/6.* )
                 exists=`crontab -l | grep "$prefix/etc/rc"`
                 if [ ".$exists" = . ]; then
                     ( crontab -l
                       echo "# <OpenPKG prefix=$prefix pkg=openpkg>"
                       echo "# chronological tasks of ${prefix} OpenPKG hierarchy"
                       echo "0          0  1  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all monthly"
                       echo "0          0  *  *  0  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all weekly"
                       echo "0          0  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all daily"
                       echo "0          *  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all hourly"
                       echo "0,15,30,45 *  *  *  *  [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all quarterly"
                       echo "# </OpenPKG>"
                     ) | /usr/bin/crontab || exit $?
                 fi
                 ;;
         esac
     fi
     #   remember what OpenPKG RPM version was installed, so we can
     #   correctly upgrade the RPM database in the %post section (see below).
     if [ -d ${prefix}/RPM/DB ]; then
         if [ -x "${prefix}/bin/openpkg" -a -x "${prefix}/libexec/openpkg/rpm" ]; then
             #   OpenPKG 2.0
             rpm="${prefix}/bin/openpkg rpm"
         else
             #   OpenPKG 1.x
             rpm="${prefix}/bin/rpm"
         fi
         rm -f ${prefix}/RPM/DB/.version >/dev/null 2>&1 || true
         $rpm --version |\
             sed -e 's;^;X;' \
                 -e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*$;\1;' \
                 -e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\).*$;\1;' \
                 -e 's;^X.*$;4.0;' \
                 >${prefix}/RPM/DB/.version
     fi
 %post
     #   optional post-processing from "pre" section
     if [ -f %{l_prefix}.pre-post-process.sh ]; then
         sh %{l_prefix}.pre-post-process.sh
         rm -f %{l_prefix}.pre-post-process.sh
     fi
     #   update or initially create OpenPKG UUID configuration
     %{l_prefix}/bin/openpkg uuid update >/dev/null 2>&1 || true
     #   determine new and old OpenPKG RPM version
     V_rpm_new="%{V_rpm}"
     if [ -f %{l_prefix}/RPM/DB/.version ]; then
         V_rpm_old="`cat %{l_prefix}/RPM/DB/.version`"
         rm -f %{l_prefix}/RPM/DB/.version >/dev/null 2>&1 || true
     else
         V_rpm_old="4.0"
     fi
     #   make sure all RPM database files are present and that their
     #   attributes are correct, etc. This is not a database rebuild
     #   operation, so this is fully harmless and can be done always.
     %{l_prefix}/lib/openpkg/rpmdb --quiet --fixate
     #   check RPM database for upgrade requirements
     if [ ".$1" = .2 -a ".$V_rpm_old" != ".$V_rpm_new" ]; then
         #   RPM 4.0/4.1 does not allow concurrent database access, so we
         #   cannot upgrade the database immediately from here (because
         #   we are still running within the execution context of the
         #   old RPM which in turn has the database locked) and instead
         #   have to just drop a note to the administrator about database
         #   upgrading. RPM 4.2 in general allows concurrent database
         #   access, but the whole stuff is too risky here, too.
         ( echo "You are upgrading the OpenPKG bootstrap from a previous"
           echo "RPM $V_rpm_old based version to this RPM $V_rpm_new based"
           echo "version. The RPM database in %{l_prefix}/RPM/DB/ can still"
           echo "be used, but it is strongly recommended to upgrade it as"
           echo "soon as possible to the latest Berkeley-DB format files by"
           echo "executing the command:"
           echo "    \$ %{l_prefix}/bin/openpkg rpm --db-rebuild"
           echo "In case of problems with the RPM database you can always"
           echo "execute the command:"
           echo "    \$ %{l_prefix}/bin/openpkg rpm --db-cleanup"
         ) | %{l_prefix}/lib/openpkg/rpmtool msg -b -t warn
     fi
     #   system command overriding support
     #   ATTENTION: THIS BETTER SHOULD BE REPLACED WITH A MORE GENERIC
     #   BUILD COMMAND OVERRIDE SOLUTION!
     if [ ! -d %{l_prefix}/lib/openpkg/override ]; then
         mkdir %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
     fi
     chown %{l_musr}:%{l_mgrp} %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
     case "`cat %{l_prefix}/etc/openpkg/platform`" in
         *-*-debian* | *-*-ubuntu* )
             #   FIXME: Evil hack to workaround build problems under Debian
             #   (at least 3.1) (and similar platforms) where a Debian
             #   install-info(8) exists which is both API and functionally
             #   incompatible to the de-facto standardized install-info(8)
             #   command from GNU Texinfo.
             if [ ! -f %{l_prefix}/lib/openpkg/override/install-info ]; then
                 ( echo "#!/bin/sh"
                   echo "echo 'OpenPKG: NOTICE: install-info(8) command execution overridden'"
                   echo "exit 0"
                 ) >%{l_prefix}/lib/openpkg/override/install-info
                 chmod 775 %{l_prefix}/lib/openpkg/override/install-info
             fi
             ;;
         *-*-macosx* | *-*-darwin* )
             #   FIXME: Evil hack to workaround the fact that Mac OS X'
             #   linker by default prefers the /usr/lib libraries and does
             #   not honor the -L options the way one would expect it.
             gcc="`%{l_prefix}/lib/openpkg/shtool path gcc`"
             cc="`%{l_prefix}/lib/openpkg/shtool path cc`"
             ld="`%{l_prefix}/lib/openpkg/shtool path ld`"
             if [ ".$gcc" != . -a ! -f %{l_prefix}/lib/openpkg/override/gcc ]; then
                 ( echo "#!/bin/sh"
                   echo "case \" \$* \" in"
                   echo "    *\" -c \"* | *\" -E \"* ) exec $gcc \"\$@\" ;;"
                   echo "    * ) exec $gcc -Wl,-search_paths_first \"\$@\" ;;"
                   echo "esac"
                 ) >%{l_prefix}/lib/openpkg/override/gcc
                 chmod 775 %{l_prefix}/lib/openpkg/override/gcc
             fi
             if [ ".$cc" != . -a ! -f %{l_prefix}/lib/openpkg/override/cc ]; then
                 ( echo "#!/bin/sh"
                   echo "case \" \$* \" in"
                   echo "    *\" -c \"* | *\" -E \"* ) exec $gcc \"\$@\" ;;"
                   echo "    * ) exec $cc -Wl,-search_paths_first \"\$@\" ;;"
                   echo "esac"
                 ) >%{l_prefix}/lib/openpkg/override/cc
                 chmod 775 %{l_prefix}/lib/openpkg/override/cc
             fi
             if [ ".$ld" != . -a ! -f %{l_prefix}/lib/openpkg/override/ld ]; then
                 ( echo "#!/bin/sh"
                   echo "exec $ld -search_paths_first \"\$@\""
                 ) >%{l_prefix}/lib/openpkg/override/ld
                 chmod 775 %{l_prefix}/lib/openpkg/override/ld
             fi
             ;;
     esac
     #   FIXME: hack to workaround problems in environments with too few
     #   development tools. ATTENTION: see one paragraph above.
     if [ ! -d %{l_prefix}/lib/openpkg/fallback ]; then
         mkdir %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
     fi
     chown %{l_musr}:%{l_mgrp} %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
     #   check for "openpkg" executable from the OpenPKG Community series
     #   print license if not OSS, otherwise register with openpkg.org
     community_version=`%{l_prefix}/bin/openpkg --license 2>/dev/null | \
         sed -e 'q' | egrep '[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*-C'`
     if [ ".$community_version" = . ]; then
         ( echo ""
           echo "NOTICE: This OpenPKG bootstrap package is based on an \"openpkg\""
           echo "executable which is covered by the following terms of use:"
           echo "______________________________________________________________________________"
           echo ""
           %{l_prefix}/bin/openpkg --license | sed -e '1d'
         ) | %{l_prefix}/lib/openpkg/rpmtool msg -b -t notice
     else
         %{l_prefix}/bin/openpkg register </dev/null >/dev/null 2>&1 || true
     fi
 %preun
     [ ".$1" != .0 ] && exit 0
     #   remove override files
     if [ -d %{l_prefix}/lib/openpkg/override ]; then
         rm -rf %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
     fi
     #   remove fallback files
     if [ -d %{l_prefix}/lib/openpkg/fallback ]; then
         rm -rf %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
     fi
     #   remove files which are not RPM controlled
     rm -rf %{l_prefix}/RPM/TMP/* %{l_prefix}/RPM/TMP/.[a-z]* >/dev/null 2>&1 || true
     rm -rf %{l_prefix}/RPM/SRC/* %{l_prefix}/RPM/SRC/.[a-z]* >/dev/null 2>&1 || true
     rm -rf %{l_prefix}/RPM/PKG/* %{l_prefix}/RPM/PKG/.[a-z]* >/dev/null 2>&1 || true
     rm -rf %{l_prefix}/RPM/DB/*  %{l_prefix}/RPM/DB/.[a-z]*  >/dev/null 2>&1 || true
     #   The following code usually would be done in a %postun section.
     #   But because we already had to remove the database in this %preun
     #   section (see the 'rm' commands above) in order to make RPM happy
     #   inside its own removal procedure, RPM would no longer find the
     #   %postun script (because it's recorded in the database files). So
     #   we have to perform the procedure already in this %preun script.
     #   except for the removal of the top-level directory it does not
     #   matter. But the top-level directory can only be removed after
     #   the RPM removal procedure took place, so we play a little delay
     #   trick below.
     #   determine current user
     cusr=`(id -un) 2>/dev/null ||\
           (id | sed -e 's;^[^(]*(\([^)]*\)).*;\1;') 2>/dev/null ||\
           (whoami) 2>/dev/null ||\
           (who am i | cut "-d " -f1) 2>/dev/null ||\
           echo $LOGNAME`
     #   determine runtime details (for both inside and outside RPM!!)
     user="%{l_musr}"
     group="%{l_mgrp}"
     prefix="%{l_prefix}"
     prefix=`echo "$prefix" | sed -e 's;//*;/;g' -e 's;/$;;'`
     #   determine platform id
     s=`(uname -s) 2>/dev/null` || s='Unknown'
     r=`(uname -r) 2>/dev/null` || r='0.0'
     plid="${s}/${r}"
     #   unregister instance in presence file
     presence="/etc/openpkg"
     exists=`cat $presence 2>/dev/null | egrep "^ *${prefix} *\$"`
     if [ ".$exists" != . ]; then
         if [ ".$cusr" != ".root" ]; then
             echo "openpkg:WARNING: skipping unregistering of $prefix in $presence" 1>&2
             echo "openpkg:WARNING: (would require root-privileges)" 1>&2
         else
             cp $presence $presence.bak && \
             egrep -v "^ *${prefix} *\$" $presence.bak >$presence
             rm -f $presence.bak >/dev/null 2>&1
             if [ ".`cat $presence`" = . ]; then
                 rm -f $presence >/dev/null 2>&1
             fi
         fi
     fi
     #   remove entry in /etc/shells
     shell="${prefix}/lib/openpkg/bash"
     exists=`cat /etc/shells 2>/dev/null | grep "^$shell"`
     if [ ".$exists" != . ]; then
         if [ ".$cusr" != ".root" ]; then
             echo "openpkg:WARNING: skipping deletion of $shell from /etc/shells" 1>&2
             echo "openpkg:WARNING: (would require root-privileges)" 1>&2
         else
             cp /etc/shells /etc/shells.bak && \
             grep -v "^${shell}" /etc/shells.bak >/etc/shells
             rm -f /etc/shells.bak >/dev/null 2>&1
         fi
     fi
     #   remove the hierarchy user/group
     for req in "super-user:%{l_susr}:%{l_suid}:%{l_sgrp}:%{l_sgid}" \
                "management:%{l_musr}:%{l_muid}:%{l_mgrp}:%{l_mgid}" \
                "restricted:%{l_rusr}:%{l_ruid}:%{l_rgrp}:%{l_rgid}" \
                "non-privileged:%{l_nusr}:%{l_nuid}:%{l_ngrp}:%{l_ngid}"; do
         #   split request into class/usr/uid/grp/gid
         OIFS="$IFS"; IFS=":"; set -- $req; IFS="$OIFS"
         class="$1"; usr="$2"; uid="$3"; grp="$4"; gid="$5"
         #   check whether user already exists
         exists=`(getent passwd "$usr"; \
                  grep "^$usr:" /etc/passwd; \
                  ypmatch "$usr" passwd; \
                  nismatch "$usr" passwd; \
                  nidump passwd . | grep "^$usr:") 2>/dev/null | \
                  sed -e 'q'`
         if [ ".$exists" != . ]; then
             if [ ".$cusr" != ".root" ]; then
                 echo "openpkg:WARNING: skipping deletion of OpenPKG $class user $usr" 1>&2
                 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
             elif [ ".$usr" = ".root" ]; then
                 echo "openpkg:WARNING: skipping deletion of OpenPKG $class user $usr" 1>&2
                 echo "openpkg:WARNING: (would remove system standard user)" 1>&2
             else
                 case "$plid" in
                     FreeBSD/* | NetBSD/* )
                         cp /etc/master.passwd /etc/master.passwd.bak && \
                         grep -v "^${usr}:" /etc/master.passwd.bak >/etc/master.passwd
                         ( PATH="$PATH:/usr/sbin"; pwd_mkdb -p /etc/master.passwd ) || exit $?
                         rm -f /etc/master.passwd.bak >/dev/null 2>&1
                         ;;
                     Linux/* | SunOS/5.* | UnixWare/* )
                         cp /etc/passwd /etc/passwd.bak && \
                         grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
                         ( PATH="$PATH:/usr/sbin"; pwconv ) || exit $?
                         rm -f /etc/passwd.bak >/dev/null 2>&1
                         ;;
                     AIX/* )
                         rmuser -p "${usr}"
                         cp /etc/security/login.cfg /etc/security/login.cfg.bak && \
                         sed -e "/^usw:/,/^[^ ]/s;\\( *shells =.*\\),$shell\\(.*\\)\$;\\1\\2;" \
                             </etc/security/login.cfg.bak >/etc/security/login.cfg && \
                         rm -f /etc/security/login.cfg.bak >/dev/null 2>&1
                         ;;
                     OSF1/V5.* )
                         cp /etc/passwd /etc/passwd.bak && \
                         grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
                         ( PATH="$PATH:/usr/sbin"; mkpasswd /etc/passwd ) || exit $?
                         rm -f /etc/passwd.bak >/dev/null 2>&1
                         ;;
                     HP-UX/* )
                         cp /etc/passwd /etc/passwd.bak && \
                         grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
                         rm -f /etc/passwd.bak >/dev/null 2>&1
                         ;;
                     Darwin/* )
                         niutil -destroy . "/users/${usr}"
                         ;;
                     IRIX*/6.* )
                         cp /etc/passwd /etc/passwd.bak && \
                         grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
                         if   [ -f /etc/shadow ]
                         then ( PATH="$PATH:/usr/sbin"; pwconv ) || exit $?
                         fi
                         rm -f /etc/passwd.bak >/dev/null 2>&1
                         ;;
                 esac
             fi
         fi
         #   check whether group already exists
         exists=`(getent group "$grp"; \
                 grep "^$grp:" /etc/group; \
                 ypmatch "$grp" group; \
                 nismatch "$grp" group; \
                 nidump group . | grep "^$grp:") 2>/dev/null | \
                 sed -e 'q'`
         if [ ".$exists" != . ]; then
             if [ ".$cusr" != ".root" ]; then
                 echo "openpkg:WARNING: skipping deletion of OpenPKG $class group $grp" 1>&2
                 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
             elif [ ".$usr" = ".root" ] || [ ".$grp" = ".root" ] || [ ".$grp" = ".wheel" ]; then
                 echo "openpkg:WARNING: skipping deletion of OpenPKG $class group $grp" 1>&2
                 echo "openpkg:WARNING: (would remove system standard group)" 1>&2
             else
                 case "$plid" in
                     Darwin/* )
                         niutil -destroy . "/groups/${grp}"
                         ;;
                     AIX/* )
                         rmgroup "${grp}"
                         ;;
                     * )
                         cp /etc/group /etc/group.bak && \
                         grep -v "^${grp}:" /etc/group.bak >/etc/group
                         rm -f /etc/group.bak >/dev/null 2>&1
                         ;;
                 esac
             fi
         fi
     done
     #   invalidate passwd and group tables from Name Service Cache Daemon to
     #   ensure chown/chgrp works immediately after pwconv on Linux and Solaris
     if [ -x /usr/sbin/nscd ]; then
         /usr/sbin/nscd -i passwd >/dev/null 2>&1 || true
         /usr/sbin/nscd -i group >/dev/null 2>&1 || true
     fi
     #   remove the startup/shutdown transfer scripts
     name=`echo "$prefix" | sed -e 's;/;;g'`
     if [ ".$cusr" != ".root" ]; then
         echo "openpkg:WARNING: skipping deletion of system run-command hooks" 1>&2
         echo "openpkg:WARNING: (would require root-privileges)" 1>&2
     else
         case "$plid" in
             FreeBSD/* )
                 rm -f /etc/rc.d/openpkg-${name} >/dev/null 2>&1
                 ;;
             NetBSD/* )
                 rm -f /etc/rc.d/${name} >/dev/null 2>&1
                 ;;
             Linux/* )
                 if [ -f /etc/gentoo-release ]; then
                     /sbin/rc-update del openpkg-${name} >/dev/null 2>&1
                     rm -f /etc/init.d/openpkg-${name}   >/dev/null 2>&1
                 else
                     #   sroot: script root directory
                     #   lroot: link   root directory
                     if [ -f /etc/debian_version ]; then
                         sroot=/etc/init.d
                         lroot=/etc/rc%d.d
                     elif [ -f /etc/redhat-release -o -f /etc/mandrake-release ]; then
                         sroot=/etc/rc.d/init.d
                         lroot=/etc/rc.d/rc%d.d
                     elif [ -f /etc/SuSE-release ]; then
                         sroot=/etc/init.d
                         lroot=/etc/init.d/rc%d.d
                     elif [ -f /etc/slackware-version ]; then
                         sroot=/etc/rc.d
                         lroot=/etc/rc.d/rc%d.d
                         name="rc.${name}"
                     else
                         echo "WARNING: you are not running one of the supported standard" 1>&2
                         echo "WARNING: Linux platforms (Debian, RedHat, Mandrake, SuSE, Gentoo)."   1>&2
                         echo "WARNING: Guessing the location of the system init scripts!" 1>&2
                         sroot=""
                         lroot=""
                         for sr in /etc/rc.d/init.d /etc/init.d /sbin/init.d; do
                             if [ -d $sr ]; then
                                 sroot="$sr"
                                 break
                             fi
                         done
                         for lr in /etc/rc.d/rc2.d /etc/rc2.d /sbin/init.d/rc2.d; do
                             if [ -d $lr ]; then
                                 lroot="`echo $lr | sed -e 's;2;%d;'`"
                                 break
                             fi
                         done
                         if [ ".$sroot" = . -o ".$lroot" = . ]; then
                             echo "ERROR: Failed to guess the location of the system init scripts!" 1>&2
                             exit 1
                         fi
                     fi
                     rm -f ${sroot}/${name} >/dev/null 2>&1
                     for i in 2 3 4 5; do
                         rm -f `echo $lroot | sed -e "s;%d;$i;"`/S99${name} >/dev/null 2>&1
                     done
                     for i in 0 1 6; do
                         rm -f `echo $lroot | sed -e "s;%d;$i;"`/K00${name} >/dev/null 2>&1
                     done
                     if [ -f /etc/slackware-version ]; then
                         for i in 0 1 2 3 4 5 6; do
                             l=`echo $lroot | sed -e "s;%d;$i;"`
                             if [ -d $l ]; then
                                 rmdir $l >/dev/null 2>&1 || true
                             fi
                         done
                     fi
                 fi
                 ;;
             SunOS/5.1* )
                 /usr/sbin/svcadm disable "svc:/openpkg/${name}:default"; sleep 2
                 /usr/sbin/svccfg delete -f "svc:/openpkg/${name}:default" >/dev/null 2>&1 || true
                 rm -f /var/svc/manifest/openpkg/${name}.xml >/dev/null 2>&1
                 rmdir /var/svc/manifest/openpkg >/dev/null 2>&1 || true
                 ;;
             SunOS/5.* )
                 rm -f /etc/init.d/${name} >/dev/null 2>&1
                 rm -f /etc/rc3.d/S99${name} >/dev/null 2>&1
                 rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
                 rm -f /etc/rc1.d/K00${name} >/dev/null 2>&1
                 ;;
             UnixWare/* )
                 rm -f /etc/init.d/${name} >/dev/null 2>&1
                 rm -f /etc/rc2.d/S99${name} >/dev/null 2>&1
                 rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
                 rm -f /etc/rc1.d/K00${name} >/dev/null 2>&1
                 ;;
             AIX/* )
                 rm -f /etc/rc.d/init.d/${name} >/dev/null 2>&1
                 rm -f /etc/rc.d/rc2.d/S99${name} >/dev/null 2>&1
                 ;;
             OSF1/V5.* )
                 rm -f /sbin/init.d/${name} >/dev/null 2>&1
                 rm -f /sbin/rc3.d/S99${name} >/dev/null 2>&1
                 rm -f /sbin/rc0.d/K00${name} >/dev/null 2>&1
                 ;;
             HP-UX/* )
                 rm -f /sbin/init.d/${name} >/dev/null 2>&1
                 rm -f /etc/rc2.d/S900${name} >/dev/null 2>&1
                 rm -f /etc/rc1.d/K100${name} >/dev/null 2>&1
                 ;;
             Darwin/* )
                 cp /etc/hostconfig /etc/hostconfig.bak && \
                 grep -v "^OPENPKG_${name}=" /etc/hostconfig.bak >/etc/hostconfig
                 rm -f /etc/hostconfig.bak >/dev/null 2>&1
                 rm -rf /System/Library/StartupItems/${name} >/dev/null 2>&1
                 ;;
             IRIX*/6.* )
                 rm -f /etc/init.d/${name} >/dev/null 2>&1
                 rm -f /etc/rc2.d/S99${name} >/dev/null 2>&1
                 rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
                 ;;
         esac
     fi
     #   remove the cron transfer entries
     if [ ".$cusr" != ".root" ]; then
         echo "openpkg:WARNING: skipping deletion of system cron hooks" 1>&2
         echo "openpkg:WARNING: (would require root-privileges)" 1>&2
     else
         case "$plid" in
             FreeBSD/* | Linux/* | Darwin/* )
                 if [ -f /etc/slackware-version ]; then
                     EDITOR=/tmp/vipw.$$
                     VISUAL="$EDITOR"
                     export EDITOR
                     export VISUAL
                     p=`echo $prefix | sed -e 's;/;\\\\\\\\/;g'`
                     ( echo "cp \$1 \$1.bak"
                       echo "cat \$1.bak | sed -e \"/<OpenPKG prefix=$p pkg=openpkg>/,/<\\\\/OpenPKG>/d\" >\$1"
                       echo "rm -f \$1.bak"
                     ) >$EDITOR
                     chmod a+x $EDITOR
                     ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
                     rm -f $EDITOR
                 else
                     exists=`grep "<OpenPKG prefix=$prefix pkg=openpkg>" /etc/crontab`
                     if [ ".$exists" != . ]; then
                         p=`echo $prefix | sed -e 's;/;\\\\/;g'`
                         cp /etc/crontab /etc/crontab.bak
                         cat /etc/crontab.bak |\
                         sed -e "/<OpenPKG prefix=$p pkg=openpkg>/,/<\\/OpenPKG>/d" \
                         >/etc/crontab
                         rm -f /etc/crontab.bak >/dev/null 2>&1
                     fi
                 fi
                 ;;
             SunOS/5.* | OSF1/V5.* | NetBSD/* | HP-UX/* | UnixWare/* | AIX/* )
                 EDITOR=/tmp/vipw.$$
                 VISUAL="$EDITOR"
                 export EDITOR
                 export VISUAL
                 p=`echo $prefix | sed -e 's;/;\\\\\\\\/;g'`
                 ( echo "cp \$1 \$1.bak"
                   echo "cat \$1.bak | sed -e \"/<OpenPKG prefix=$p pkg=openpkg>/,/<\\\\/OpenPKG>/d\" >\$1"
                   echo "rm -f \$1.bak"
                 ) >$EDITOR
                 chmod a+x $EDITOR
                 ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
                 rm -f $EDITOR
                 ;;
             IRIX*/6.* )
                 p=`echo $prefix | sed -e 's;/;\\\\\\/;g'`
                 ( crontab -l |
                   sed -e "/<OpenPKG prefix=$p pkg=openpkg>/,/<\/OpenPKG>/d"
                 ) | /usr/bin/crontab || exit $?
                 ;;
         esac
     fi
     #   delayed removal of top-level directory.
     ( sleep 2
       rm -rf %{l_prefix}/RPM/DB/* %{l_prefix}/RPM/DB/.[a-z]* >/dev/null 2>&1 || true
       rmdir %{l_prefix}/RPM/DB >/dev/null 2>&1 || true
       rmdir %{l_prefix}/RPM >/dev/null 2>&1 || true
       rmdir %{l_prefix} >/dev/null 2>&1 || true
     ) </dev/null >/dev/null 2>/dev/null &

OpenPKG Specs / annotate

openpkg/openpkg.spec@b8e8f9dbbfd3 (annotated)

openpkg/openpkg.spec