OpenPKG Specs: clamav/clamav.spec@c10fb90893b9 (annotated)

clamav/clamav.spec@c10fb90893b9 (annotated)

clamav/clamav.spec

Thu, 04 Oct 2012 20:30:05 +0200

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Thu, 04 Oct 2012 20:30:05 +0200
changeset 715: c10fb90893b9
parent 498: c6b0e6c7f67d
permissions: -rw-r--r--

Correct out of date build configuration, porting to Solaris 11 network
link infrastructure and new libpcap logic. This additionally allows for
device drivers in subdirectories of /dev. Correct packaged nmap
personalities and signatures to work out of the box. Finally, hack
arpd logic to properly close sockets and quit on TERM by repeating
signaling in the run command script. Sadly, all this fails to correct
the run time behaviour of honeyd which fails to bind to the IP layer.

 ##
 ##  clamav.spec -- OpenPKG RPM Package Specification
 ##  Copyright (c) 2000-2009 OpenPKG Foundation e.V. <http://openpkg.net/>
 ##
 ##  Permission to use, copy, modify, and distribute this software for
 ##  any purpose with or without fee is hereby granted, provided that
 ##  the above copyright notice and this permission notice appear in all
 ##  copies.
 ##
 ##  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
 ##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 ##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 ##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
 ##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 ##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 ##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 ##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 ##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 ##  SUCH DAMAGE.
 ##
 # MSvB FIXME:
 # MSvB FIXME: Problem with logging to syslog instead of FSL...
 # MSvB FIXME:
 # MSvB FIXME: Oct  2 10:15:47 host.name.tld clamav-milter[25958]: [ID 909925 user.error] ClamAV: thread_create() failed: 11, try again
 # MSvB FIXME: Oct  2 10:17:28 host.name.tld last message repeated 1 time
 # MSvB FIXME:
 #   package information
 Name:         clamav
 Summary:      Clam Antivirus
 URL:          http://www.clamav.net/
 Vendor:       Tomasz Kojm
 Packager:     OpenPKG Foundation e.V.
 Distribution: OpenPKG Community
 Class:        EVAL
 Group:        AntiVirus
 License:      GPL
 Version:      0.97.5
 Release:      20120800
 #   package options
 %option       with_milter  no
 #   list of sources
 Source0:      http://switch.dl.sourceforge.net/clamav/clamav-%{version}.tar.gz
 Source1:      rc.clamav
 Patch0:       clamav.patch
 #   build information
 BuildPreReq:  OpenPKG, openpkg >= 20100101, gcc, bzip2, pkgconfig, bc
 PreReq:       OpenPKG, openpkg >= 20100101
 BuildPreReq:  zlib, bzip2, curl, gmp, libiconv, openssl
 PreReq:       zlib, bzip2, curl, gmp, libiconv, openssl
 %if "%{with_milter}" == "yes"
 BuildPreReq:  milter
 PreReq:       milter
 %endif
 %description
     Clam AntiVirus is an anti-virus toolkit for UNIX. The main
     purpose of this software is the integration with mail servers
     (attachment scanning). The package provides a flexible and scalable
     multi-threaded daemon, a command line scanner, and a tool for
     automatic updating via Internet. The programs are based on a shared
     library distributed with the Clam AntiVirus package, which you can
     use with your own software. The virus database is based on the virus
     database from OpenAntiVirus, but contains additional signatures.
 %track
     prog clamav = {
         version   = %{version}
         url       = http://sourceforge.net/projects/clamav/files/
         regex     = clamav-(\d+\.\d+(\.\d+)*)\.tar\.gz
     }
 %prep
     %setup -q
     %patch -p0
     %{l_shtool} subst \
         -e 's;lib\(milter/mfapi.h\);\1;' \
         configure
     %{l_shtool} subst \
         -e 's;test -s  *\(.*\)  *-a -s;test -e \1 -a -e;' \
         database/Makefile.in
 %build
     #   configure package
     CC="%{l_cc}" \
     CFLAGS="%{l_cflags -O}" \
     CPPFLAGS="%{l_cppflags}" \
     LDFLAGS="%{l_ldflags}" \
     GREP="grep" \
     ./configure \
         --prefix=%{l_prefix} \
         --libdir=%{l_prefix}/lib \
         --mandir=%{l_prefix}/man \
         --sysconfdir=%{l_prefix}/etc/clamav \
         --with-zlib=%{l_prefix} \
         --with-libcurl \
         --with-user=%{l_rusr} \
         --with-group=%{l_rgrp} \
         --without-tcpwrappers \
         --disable-clamav \
         --disable-clamuko \
         --disable-urandom \
         --disable-cr \
 %if "%{with_milter}" == "yes"
         --enable-milter \
         --with-sendmail=/dev/null \
 %else
         --disable-milter \
 %endif
         --disable-unrar \
         --disable-shared
     #   build package
     %{l_make} %{l_mflags -O}
 %install
     #   perform standard package installation
     %{l_make} %{l_mflags} install DESTDIR="$RPM_BUILD_ROOT"
     #   install default configuration
     %{l_shtool} mkdir -f -p -m 755 \
         $RPM_BUILD_ROOT%{l_prefix}/etc/clamav
     %{l_shtool} install -c -m 644 \
         -e 's;^\(Example\);#\1;' \
         -e 's;^#\(LogFile\) /.*;\1 %{l_prefix}/var/clamav/clamd.log;' \
         -e 's;^#\(LogTime.*\);\1;' \
         -e 's;^#\(PidFile\).*;\1 %{l_prefix}/var/clamav/clamd.pid;' \
         -e 's;^\(LocalSocket\).*;\1 %{l_prefix}/var/clamav/clamd.sock;' \
         -e 's;^#\(FixStaleSocket.*\);\1;' \
         -e 's;^#\(DatabaseDirectory\).*;\1 %{l_prefix}/share/clamav;' \
         -e 's;^#\(User\).*;\1 %{l_rusr};' \
         etc/clamd.conf \
         $RPM_BUILD_ROOT%{l_prefix}/etc/clamav/
     %{l_shtool} install -c -m 644 \
         -e 's;^\(Example\);#\1;' \
         -e 's;^#\(DatabaseDirectory\).*;\1 %{l_prefix}/share/clamav;' \
         -e 's;^#\(UpdateLogFile\).*;\1 %{l_prefix}/var/clamav/freshclam.log;' \
         -e 's;^#\(NotifyClamd\).*;\1 %{l_prefix}/etc/clamav/clamd.conf;' \
         etc/freshclam.conf \
         $RPM_BUILD_ROOT%{l_prefix}/etc/clamav/
     #   install run-command script
     %{l_shtool} mkdir -f -p -m 755 \
         $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
     %{l_shtool} install -c -m 755 %{l_value -s -a} \
         %{SOURCE rc.clamav} $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/
     #   strip-down installation hierarchy
     strip $RPM_BUILD_ROOT%{l_prefix}/bin/*  >/dev/null 2>&1 || true
     strip $RPM_BUILD_ROOT%{l_prefix}/sbin/* >/dev/null 2>&1 || true
 %if "%{with_milter}" == "no"
     rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man8/clamav-milter.8
 %endif
     #   create additional installation directory
     %{l_shtool} mkdir -f -p -m 755 \
         $RPM_BUILD_ROOT%{l_prefix}/var/clamav
     #   determine installation files
     %{l_rpmtool} files -v -ofiles -r$RPM_BUILD_ROOT \
         %{l_files_std} \
         '%config %{l_prefix}/etc/clamav/*.conf' \
         '%attr(755,%{l_rusr},%{l_mgrp}) %{l_prefix}/var/clamav' \
         '%attr(755,%{l_rusr},%{l_mgrp}) %{l_prefix}/share/clamav'
 %files -f files
 %clean
 %pre
     #   before upgrade, save status and stop service
     [ $1 -eq 2 ] || exit 0
     eval `%{l_rc} clamav status 2>/dev/null | tee %{l_tmpfile}`
     %{l_rc} clamav stop 2>/dev/null
     exit 0
 %post
     if [ $1 -eq 2 ]; then
         #   after upgrade, restore status
         eval `cat %{l_tmpfile}`; rm -f %{l_tmpfile}
         [ ".$clamav_active" = .yes ] && %{l_rc} clamav start
     fi
     exit 0
 %preun
     #   before erase, stop service and remove log files
     [ $1 -eq 0 ] || exit 0
     %{l_rc} clamav stop 2>/dev/null
     rm -f $RPM_INSTALL_PREFIX/var/clamav/*.log* >/dev/null 2>&1 || true
     exit 0

OpenPKG Specs / annotate

clamav/clamav.spec@c10fb90893b9 (annotated)

clamav/clamav.spec