• file
• revisions
• annotate
• diff
• comparison
• raw

openpkg/openpkg.spec@c10fb90893b9 (annotated)

openpkg/openpkg.spec

Thu, 04 Oct 2012 20:30:05 +0200

author

Michael Schloh von Bennewitz <michael@schloh.com>

date

Thu, 04 Oct 2012 20:30:05 +0200

changeset 715

c10fb90893b9

parent 570

d7167d2b16f4

permissions

-rw-r--r--

Correct out of date build configuration, porting to Solaris 11 network
link infrastructure and new libpcap logic. This additionally allows for
device drivers in subdirectories of /dev. Correct packaged nmap
personalities and signatures to work out of the box. Finally, hack
arpd logic to properly close sockets and quit on TERM by repeating
signaling in the run command script. Sadly, all this fails to correct
the run time behaviour of honeyd which fails to bind to the IP layer.

michael@13	1	##
michael@13	2	## openpkg.spec -- OpenPKG RPM Package Specification
michael@428	3	## Copyright (c) 2000-2012 OpenPKG GmbH <http://openpkg.com/>
michael@13	4	##
michael@428	5	## This software is property of the OpenPKG GmbH, DE MUC HRB 160208.
michael@428	6	## All rights reserved. Licenses which grant limited permission to use,
michael@428	7	## copy, modify and distribute this software are available from the
michael@428	8	## OpenPKG GmbH.
michael@13	9	##
michael@428	10	## THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED
michael@13	11	## WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
michael@13	12	## MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
michael@13	13	## IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
michael@13	14	## CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
michael@13	15	## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
michael@13	16	## LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
michael@13	17	## USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
michael@13	18	## ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
michael@13	19	## OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
michael@13	20	## OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
michael@13	21	## SUCH DAMAGE.
michael@13	22	##
michael@13	23
michael@13	24	# NOTICE: This OpenPKG RPM specification is _very_ special, because
michael@13	25	# it is used both for bootstrapping OpenPKG with its OpenPKG RPM and
michael@13	26	# for regular builds of OpenPKG RPM in order to upgrade an existing
michael@13	27	# installation. For this it has to interact correctly with the
michael@13	28	# "openpkg.boot" script. See the documentation in the file "README"
michael@13	29	# and the source of the companion script "openpkg.boot" for details,
michael@13	30	# but do not touch anything here until you are 100% sure about what
michael@13	31	# you are doing. In short: This script is allowed to use only a very
michael@13	32	# restricted subset of the OpenPKG RPM functionality!
michael@13	33
michael@13	34	# BUILD REQUIREMENTS:
michael@13	35	# o any sh(1)
michael@13	36	# o any tar(1)
michael@13	37	# o any make(1)
michael@13	38	# o any cc(1)
michael@13	39
michael@13	40	# the used software versions
michael@428	41	%define V_rpm_major 5.1
michael@428	42	%define V_rpm_minor 9
michael@428	43	%define V_popt 1.16
michael@428	44	%define V_lua 5.1.4
michael@428	45	%define V_sqlite 3.6.17
michael@428	46	%define V_zlib 1.2.7
michael@428	47	%define V_bzip2 1.0.6
michael@428	48	%define V_beecrypt 4.2.1
michael@428	49	%define V_curl 7.26.0
michael@428	50	%define V_pcre 8.31
michael@428	51	%define V_make 3.82
michael@428	52	%define V_gzip 1.5
michael@428	53	%define V_patch 2.6.1
michael@428	54	%define V_tar 1.26
michael@428	55	%define V_bash 4.2
michael@428	56	%define V_bash_pl 29
michael@428	57	%define V_uuid 1.6.2
michael@428	58	%define V_config 20120627
michael@428	59	%define V_perl 5.16.0
michael@428	60	%define V_openssl 1.0.1c
michael@428	61	%define V_xz 5.0.4
michael@428	62	%define V_shtool 2.0.8
michael@428	63	%define V_libarchive 3.0.3
michael@428	64	%define V_diffutils 3.2
michael@428	65	%define V_svs 1.1.0
michael@13	66
michael@13	67	# package information
michael@13	68	Name: openpkg
michael@428	69	Summary: OpenPKG Framework
michael@428	70	URL: http://openpkg.org/
michael@428	71	Vendor: OpenPKG GmbH
michael@428	72	Packager: OpenPKG GmbH
michael@428	73	Distribution: OpenPKG
michael@428	74	Class: BOOT
michael@13	75	Group: Bootstrapping
michael@428	76	License: Proprietary, Open Source
michael@428	77	Version: 4.6.7
michael@429	78	Release: 20120800
michael@13	79
michael@428	80	# list of pristine upstream sources
michael@250	81	Source0: ftp://ftp.gnu.org/gnu/patch/patch-%{V_patch}.tar.gz
michael@13	82	Source1: ftp://ftp.cwru.edu/pub/bash/bash-%{V_bash}.tar.gz
michael@13	83	Source2: ftp://ftp.gnu.org/gnu/make/make-%{V_make}.tar.gz
michael@13	84	Source3: ftp://ftp.gnu.org/gnu/tar/tar-%{V_tar}.tar.gz
michael@428	85	Source4: http://download.openpkg.org/components/versioned/config/config-%{V_config}.tar.gz
michael@428	86	Source5: http://download.openpkg.org/components/derived/gzip/gzip-%{V_gzip}.tar
michael@428	87	Source6: http://download.openpkg.org/components/derived/perl/perl-%{V_perl}-mini.tar.gz
michael@428	88	Source7: http://rpm5.org/files/rpm/rpm-%{V_rpm_major}/rpm-%{V_rpm_major}.%{V_rpm_minor}.tar.gz
michael@428	89	Source8: ftp://ftp.openssl.org/source/openssl-%{V_openssl}.tar.gz
michael@428	90	Source9: ftp://ftp.ossp.org/pkg/lib/uuid/uuid-%{V_uuid}.tar.gz
michael@428	91	Source10: http://curl.haxx.se/download/curl-%{V_curl}.tar.gz
michael@428	92	Source11: http://switch.dl.sourceforge.net/beecrypt/beecrypt-%{V_beecrypt}.tar.gz
michael@428	93	Source12: http://www.bzip.org/%{V_bzip2}/bzip2-%{V_bzip2}.tar.gz
michael@428	94	Source13: http://www.zlib.net/zlib-%{V_zlib}.tar.gz
michael@428	95	Source14: http://rpm5.org/files/popt/popt-%{V_popt}.tar.gz
michael@428	96	Source15: http://www.sqlite.org/sqlite-%{V_sqlite}.tar.gz
michael@428	97	Source16: ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-%{V_pcre}.tar.gz
michael@428	98	Source17: http://libarchive.googlecode.com/files/libarchive-%{V_libarchive}.tar.gz
michael@428	99	Source18: ftp://ftp.gnu.org/gnu/diffutils/diffutils-%{V_diffutils}.tar.gz
michael@428	100	Source19: ftp://ftp.ossp.org/pkg/tool/svs/svs-%{V_svs}.tar.gz
michael@428	101	Source20: http://tukaani.org/xz/xz-%{V_xz}.tar.gz
michael@428	102
michael@428	103	# list of local patches against pristine upstream sources
michael@13	104	Source100: bash.patch
michael@428	105	Source101: bash.patch.vendor
michael@428	106	Source102: beecrypt.patch
michael@428	107	Source103: make.patch
michael@428	108	Source104: openssl.patch
michael@428	109	Source105: perl.patch
michael@428	110	Source106: tar.patch
michael@428	111	Source107: rpm.patch
michael@428	112	Source108: popt.patch
michael@428	113	Source109: sqlite.patch
michael@428	114	Source110: curl.patch
michael@428	115	Source111: pcre.patch
michael@428	116	Source112: diffutils.patch
michael@428	117	Source113: libarchive.patch
michael@428	118	Source114: patch.strnlen.c
michael@428	119	Source115: patch.Makefile.in
michael@428	120	Source116: xz.patch
michael@428	121	Source117: zlib.patch
michael@428	122
michael@428	123	# list of local sources
michael@428	124	Source200: README
michael@428	125	Source201: etc.prereq.sh
michael@428	126	Source202: etc.usrgrp.sh
michael@428	127	Source203: etc.wrapbin.sh
michael@428	128	Source204: etc.wrapsrc.sh
michael@428	129	Source205: dot.bash_login
michael@428	130	Source206: dot.bashrc
michael@428	131	Source207: dot.lsyncrc
michael@428	132	Source208: local.README
michael@428	133	Source209: lsync
michael@428	134	Source210: lsync.8
michael@428	135	Source211: lsync.pod
michael@428	136	Source212: man.sh
michael@428	137	Source213: openpkg.1
michael@428	138	Source214: openpkg.boot
michael@428	139	Source215: openpkg.com.pgp
michael@428	140	Source216: openpkg.net.pgp
michael@428	141	Source217: openpkg.org.pgp
michael@428	142	Source218: openpkg.pod
michael@428	143	Source219: openpkg.sh
michael@428	144	Source220: rc
michael@428	145	Source221: rc.8
michael@428	146	Source222: rc.conf
michael@428	147	Source223: rc.func
michael@428	148	Source224: rc.openpkg
michael@428	149	Source225: rc.pod
michael@428	150	Source226: release.8
michael@428	151	Source227: release.pod
michael@428	152	Source228: release.sh
michael@428	153	Source229: root.README
michael@428	154	Source230: rpm-config.8
michael@428	155	Source231: rpm-config.pod
michael@428	156	Source232: rpm-config.sh
michael@428	157	Source233: rpmdb
michael@428	158	Source234: rpmtool
michael@428	159	Source235: rpmtool.8
michael@428	160	Source236: rpmtool.pod
michael@428	161	Source237: shtool
michael@428	162	Source238: shtool.sh
michael@428	163	Source239: uuid.8
michael@428	164	Source240: uuid.pod
michael@428	165	Source241: uuid.sh
michael@428	166	Source242: rpmmacros
michael@428	167	Source243: rpmpopt
michael@428	168	Source244: curl.sh
michael@428	169	Source245: index.pl
michael@428	170	Source246: index.8
michael@428	171	Source247: index.pod
michael@428	172	Source248: build.pl
michael@428	173	Source249: build.8
michael@428	174	Source250: build.pod
michael@428	175	Source251: makeproxy.pl
michael@428	176	Source252: makeproxy.8
michael@428	177	Source253: lint-fsl.pl
michael@428	178	Source254: lint-rc.pl
michael@428	179	Source255: lint-rpm.pl
michael@428	180	Source256: lint-spec.pl
michael@428	181	Source257: dev.pl
michael@428	182	Source258: dev.8
michael@428	183	Source259: dev.pod
michael@428	184	Source260: openpkg.mk
michael@428	185	Source261: openpkg.c
michael@428	186	Source262: Makefile
michael@428	187	Source263: mutex.c
michael@428	188	Source264: mutex.mk
michael@428	189	Source265: register.sh
michael@428	190	Source266: register.pod
michael@428	191	Source267: register.8
michael@428	192	Source268: rpm.sh
michael@428	193	Source269: license.lua
michael@428	194	Source270: license-BOOT.txt
michael@428	195	Source271: license-COMMUNITY.txt
michael@428	196	Source272: license-EVAL.txt
michael@428	197	Source273: license-EXAMPLE.txt
michael@428	198	Source274: license-PROMO.txt
michael@428	199	Source275: license-RECOVERY.txt
michael@428	200	Source276: license.sh
michael@428	201	Source277: license.pod
michael@428	202	Source278: license.8
michael@428	203	Source279: rpmlua
michael@428	204	Source280: sea.sh
michael@428	205	Source281: sea.pod
michael@428	206	Source282: sea.8
michael@428	207	Source283: stack.sh
michael@428	208	Source284: stack.pod
michael@428	209	Source285: stack.8
michael@428	210	Source286: search.pl
michael@428	211	Source287: search.pod
michael@428	212	Source288: search.8
michael@428	213	Source289: mirror.pl
michael@428	214	Source290: mirror.pod
michael@428	215	Source291: mirror.8
michael@13	216
michael@13	217	# build information
michael@13	218	BuildRoot: %{l_buildroot}
michael@13	219	AutoReq: no
michael@13	220	AutoReqProv: no
michael@428	221	Provides: %{l_prefix}
michael@13	222	Provides: OpenPKG
michael@428	223	Provides: openpkg = %{release}-%{release}
michael@13	224
michael@13	225	%description
michael@444	226	This is the OpenPKG Framework, the so called "bootstrap" package
michael@444	227	of OpenPKG. OpenPKG is a cross platform, self contained, RPM based
michael@428	228	software packaging solution, targeting the flexible building of
michael@428	229	software stacks on Unix platforms. The RPM Package Manager (RPM)
michael@428	230	is the underlying, sophisticated and portable package management
michael@428	231	tool which drives the automated building, installation, management
michael@428	232	and deinstallation of all Unix software components in an OpenPKG
michael@428	233	software stack.
michael@13	234
michael@428	235	This OpenPKG package contains the following individual
michael@428	236	software components (individual licenses listed in brackets):
michael@428	237	OpenPKG Framework %(echo "%{version}" | awk '{ printf("%%-7s", $1); }') [Proprietary]
michael@428	238	rpm5.org RPM %(echo "%{V_rpm_major}.%{V_rpm_minor}" | awk '{ printf("%%-7s", $1); }') [LGPL]
michael@428	239	rpm5.org POPT %(echo "%{V_popt}" | awk '{ printf("%%-7s", $1); }') [LGPL]
michael@428	240	BeeCrypt %(echo "%{V_beecrypt}" | awk '{ printf("%%-7s", $1); }') [LGPL]
michael@428	241	Lua %(echo "%{V_lua}" | awk '{ printf("%%-7s", $1); }') [MIT]
michael@444	242	SQLite %(echo "%{V_sqlite}" | awk '{ printf("%%-7s", $1); }') [Public Domain]
michael@428	243	PCRE %(echo "%{V_pcre}" | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
michael@428	244	ZLib %(echo "%{V_zlib}" | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
michael@428	245	XZ %(echo "%{V_xz}" | awk '{ printf("%%-7s", $1); }') [PD/LGPL/GPL]
michael@428	246	GNU Bzip2 %(echo "%{V_bzip2}" | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
michael@428	247	GNU Gzip %(echo "%{V_gzip}" | awk '{ printf("%%-7s", $1); }') [GPL]
michael@428	248	GNU Tar %(echo "%{V_tar}" | awk '{ printf("%%-7s", $1); }') [GPL]
michael@428	249	GNU Patch %(echo "%{V_patch}" | awk '{ printf("%%-7s", $1); }') [GPL]
michael@428	250	GNU Shtool %(echo "%{V_shtool}" | awk '{ printf("%%-7s", $1); }') [GPL]
michael@428	251	GNU Make %(echo "%{V_make}" | awk '{ printf("%%-7s", $1); }') [GPL]
michael@428	252	GNU Bash %(echo "%{V_bash}.%{V_bash_pl}" | awk '{ printf("%%-7s", $1); }') [GPL]
michael@428	253	GNU DiffUtils %(echo "%{V_diffutils}" | awk '{ printf("%%-7s", $1); }') [GPL]
michael@428	254	BSD libarchive %(echo "%{V_libarchive}" | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
michael@428	255	OSSP uuid %(echo "%{V_uuid}" | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
michael@428	256	OSSP svs %(echo "%{V_svs}" | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
michael@428	257	cURL %(echo "%{V_curl}" | awk '{ printf("%%-7s", $1); }') [BSD/MIT]
michael@428	258	OpenSSL %(echo "%{V_openssl}" | awk '{ printf("%%-7s", $1); }') [BSD]
michael@428	259	Perl %(echo "%{V_perl}" | awk '{ printf("%%-7s", $1); }') [Artistic]
michael@13	260
michael@13	261	%track
michael@13	262	prog openpkg:bash = {
michael@13	263	version = %{V_bash}
michael@13	264	url = ftp://ftp.cwru.edu/pub/bash/
michael@13	265	regex = bash-(__VER__)\.tar\.gz
michael@13	266	}
michael@13	267	prog openpkg:bzip2 = {
michael@13	268	version = %{V_bzip2}
michael@13	269	url = http://www.bzip.org/downloads.html
michael@13	270	regex = bzip2-(__VER__)\.tar\.gz
michael@13	271	}
michael@13	272	prog openpkg:curl = {
michael@13	273	version = %{V_curl}
michael@13	274	url = http://curl.haxx.se/download/
michael@13	275	regex = curl-(__VER__)\.tar\.gz
michael@13	276	}
michael@428	277	prog openpkg:pcre = {
michael@428	278	version = %{V_pcre}
michael@428	279	url = ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/
michael@428	280	regex = pcre-(__VER__)\.tar\.gz
michael@428	281	}
michael@13	282	prog openpkg:gzip = {
michael@13	283	version = %{V_gzip}
michael@13	284	url = ftp://ftp.gnu.org/gnu/gzip/
michael@13	285	regex = gzip-(__VER__)\.tar(\.gz)?
michael@13	286	}
michael@13	287	prog openpkg:make = {
michael@13	288	version = %{V_make}
michael@13	289	url = ftp://ftp.gnu.org/gnu/make/
michael@13	290	regex = make-(__VER__)\.tar\.gz
michael@13	291	}
michael@13	292	prog openpkg:patch = {
michael@13	293	version = %{V_patch}
michael@428	294	url = ftp://ftp.gnu.org/gnu/patch/
michael@13	295	regex = patch-(__VER__)\.tar\.gz
michael@13	296	}
michael@428	297	prog openpkg:popt = {
michael@428	298	version = %{V_popt}
michael@428	299	url = http://rpm5.org/files/popt/
michael@428	300	regex = popt-(\d+\.\d+)\.tar\.gz
michael@428	301	}
michael@13	302	prog openpkg:rpm = {
michael@428	303	version = %{V_rpm_major}.%{V_rpm_minor}
michael@428	304	url = http://rpm5.org/files/rpm/rpm-%{V_rpm_major}/
michael@428	305	regex = rpm-(\d+\.\d+[.ab]\d+)\.tar\.gz
michael@13	306	}
michael@13	307	prog openpkg:tar = {
michael@13	308	version = %{V_tar}
michael@13	309	url = ftp://ftp.gnu.org/gnu/tar/
michael@13	310	regex = tar-(__VER__)\.tar\.gz
michael@13	311	}
michael@13	312	prog openpkg:zlib = {
michael@13	313	version = %{V_zlib}
michael@13	314	url = http://www.zlib.net/
michael@13	315	regex = zlib-(__VER__)\.tar\.gz
michael@13	316	}
michael@428	317	prog openpkg:diffutils = {
michael@428	318	version = %{V_diffutils}
michael@428	319	url = ftp://alpha.gnu.org/gnu/diffutils/
michael@428	320	regex = diffutils-(__VER__)\.tar\.gz
michael@428	321	}
michael@428	322	prog openpkg:libarchive = {
michael@428	323	version = %{V_libarchive}
michael@428	324	url = http://code.google.com/p/libarchive/downloads/list
michael@428	325	regex = libarchive-(__VER__)\.tar\.gz
michael@428	326	}
michael@13	327	prog openpkg:uuid = {
michael@13	328	version = %{V_uuid}
michael@13	329	url = ftp://ftp.ossp.org/pkg/lib/uuid/
michael@13	330	regex = uuid-(__VER__)\.tar\.gz
michael@13	331	}
michael@428	332	prog openpkg:svs = {
michael@428	333	version = %{V_svs}
michael@428	334	url = ftp://ftp.ossp.org/pkg/tool/svs/
michael@428	335	regex = svs-(__VER__)\.tar\.gz
michael@428	336	}
michael@13	337	prog openpkg:config = {
michael@13	338	version = %{V_config}
michael@428	339	url = http://download.openpkg.org/components/versioned/config/
michael@13	340	regex = config-(__VER__)\.tar\.gz
michael@13	341	}
michael@13	342	prog openpkg:beecrypt = {
michael@13	343	version = %{V_beecrypt}
michael@428	344	url = http://sourceforge.net/project/showfiles.php?group_id=8924&package_id=9007
michael@13	345	regex = beecrypt-(__VER__)\.tar\.gz
michael@13	346	}
michael@13	347	prog openpkg:perl = {
michael@13	348	version = %{V_perl}
michael@428	349	url = http://download.openpkg.org/components/derived/perl/
michael@13	350	regex = perl-(__VER__)-mini\.tar\.gz
michael@13	351	}
michael@13	352	prog openpkg:openssl = {
michael@13	353	version = %{V_openssl}
michael@13	354	url = ftp://ftp.openssl.org/source/
michael@13	355	regex = openssl-(\d+\.\d+\.\d+[a-z]?)\.tar\.gz
michael@13	356	}
michael@428	357	prog openpkg:lua = {
michael@428	358	version = %{V_lua}
michael@428	359	url = http://www.lua.org/download.html
michael@428	360	regex = lua-(\d+\.\d+\.\d+)\.tar\.gz
michael@13	361	}
michael@428	362	prog openpkg:sqlite = {
michael@428	363	version = %{V_sqlite}
michael@428	364	url = http://www.sqlite.org/download.html
michael@428	365	regex = sqlite-(\d+\.\d+\.\d+(?:\.\d+)?)\.tar\.gz
michael@428	366	}
michael@428	367	prog openpkg:xz = {
michael@428	368	version = %{V_xz}
michael@428	369	url = http://tukaani.org/xz/
michael@428	370	regex = xz-(\d+\.\d+\.\d+)\.tar\.gz
michael@13	371	}
michael@13	372
michael@13	373	%prep
michael@13	374	# skip in bootstrap phase 2 (see openpkg.boot)
michael@13	375	[ ".$OPENPKG_BOOT" = .1 ] && exit 0
michael@13	376
michael@13	377	# switch into a temporary build area
michael@13	378	rm -rf openpkg-%{version}
michael@13	379	mkdir openpkg-%{version}
michael@13	380	cd openpkg-%{version}
michael@13	381	rm -f .buildenv
michael@13	382	touch .buildenv
michael@13	383
michael@13	384	# provide a bootstrap alternative to %{SOURCE xxx} because else
michael@13	385	# it is not possible to upgrade a newer OpenPKG RPM with an older
michael@13	386	# OpenPKG RPM.
michael@13	387	echo >>.buildenv 'SOURCE () {'
michael@13	388	echo >>.buildenv ' if [ -f "%{_specdir}/$1" ]; then'
michael@13	389	echo >>.buildenv ' echo "%{_specdir}/$1"'
michael@13	390	echo >>.buildenv ' else'
michael@13	391	echo >>.buildenv ' echo "%{_sourcedir}/$1"'
michael@13	392	echo >>.buildenv ' fi'
michael@13	393	echo >>.buildenv '}'
michael@13	394	echo >>.buildenv 'VERBOSE () {'
michael@13	395	echo >>.buildenv ' if [ -f "%{_specdir}/rpmtool" ]; then'
michael@13	396	echo >>.buildenv ' echo "$*" | sh %{_specdir}/rpmtool msg'
michael@13	397	echo >>.buildenv ' else'
michael@13	398	echo >>.buildenv ' echo "$*" | sh %{_sourcedir}/rpmtool msg'
michael@13	399	echo >>.buildenv ' fi'
michael@13	400	echo >>.buildenv '}'
michael@13	401	. ./.buildenv
michael@13	402
michael@13	403	# display verbosity header
michael@13	404	set +x; VERBOSE "PREPARATION: Determine Build Tool Paths"; set -x
michael@13	405
michael@13	406	# determine path to shtool
michael@13	407	shtool=`SOURCE shtool`
michael@13	408	echo "shtool=$shtool" >>./.buildenv
michael@13	409
michael@13	410	# determine development tools
michael@13	411	# - bootstrapping: %{l_xxx} is set via sed(1)
michael@13	412	# - upgrading new: %{l_xxx} is set via rpmmacros
michael@13	413	# - upgrading old: %{l_xxx} is not set at all
michael@13	414
michael@13	415	# manually make sure tar(1) is available
michael@13	416	l_tar=""; export l_tar
michael@13	417	[ ".%{?l_tar:set}" = .set ] && l_tar="%{l_tar}"
michael@13	418	[ ".%{?use_tar:set}" = .set ] && l_tar="%{use_tar}"
michael@13	419	if [ ".$l_tar" = . ]; then
michael@13	420	l_tar=`sh $shtool path gtar tar`
michael@13	421	if [ ".$l_tar" = . ]; then
michael@13	422	echo "openpkg: prerequisite tool \`gtar' or \`tar' not found"
michael@13	423	exit 1
michael@13	424	fi
michael@13	425	fi
michael@13	426	echo "l_tar=\"$l_tar\"; export l_tar" >>.buildenv
michael@13	427
michael@13	428	# manually make sure make(1) is available
michael@13	429	l_make=""; export l_make
michael@13	430	[ ".%{?l_make:set}" = .set ] && l_make="%{l_make}"
michael@13	431	[ ".%{?use_make:set}" = .set ] && l_make="%{use_make}"
michael@13	432	if [ ".$l_make" = . ]; then
michael@13	433	l_make=`sh $shtool path gmake make`
michael@13	434	if [ ".$l_make" = . ]; then
michael@13	435	echo "openpkg: prerequisite tool \`gmake' or \`make' not found"
michael@13	436	exit 1
michael@13	437	fi
michael@13	438	fi
michael@13	439	echo "l_make=\"$l_make\"; export l_make" >>.buildenv
michael@13	440
michael@13	441	# manually make sure cc(1) is available
michael@13	442	l_cc=""; export l_cc
michael@13	443	[ ".%{?l_cc:set}" = .set ] && l_cc="%{l_cc}"
michael@13	444	[ ".%{?use_cc:set}" = .set ] && l_cc="%{use_cc}"
michael@13	445	if [ ".$l_cc" = . ]; then
michael@13	446	l_cc=`sh $shtool path gcc cc`
michael@13	447	if [ ".$l_cc" = . ]; then
michael@13	448	echo "openpkg: prerequisite tool \`gcc' or \`cc' not found"
michael@13	449	exit 1
michael@13	450	fi
michael@13	451	fi
michael@13	452	echo "l_cc=\"$l_cc\"; export l_cc" >>.buildenv
michael@13	453
michael@13	454	# manually make sure ar(1) is available
michael@13	455	l_ar=""; export l_ar
michael@13	456	[ ".%{?l_ar:set}" = .set ] && l_ar="%{l_ar}"
michael@13	457	[ ".%{?use_ar:set}" = .set ] && l_ar="%{use_ar}"
michael@13	458	if [ ".$l_ar" = . ]; then
michael@13	459	l_ar=`sh $shtool path ar`
michael@13	460	if [ ".$l_ar" = . ]; then
michael@13	461	echo "openpkg: prerequisite tool \`ar' not found"
michael@13	462	exit 1
michael@13	463	fi
michael@13	464	fi
michael@13	465	echo "l_ar=\"$l_ar\"; export l_ar" >>.buildenv
michael@13	466
michael@13	467	# manually make sure ld(1) is available
michael@13	468	l_ld=""; export l_ld
michael@13	469	[ ".%{?l_ld:set}" = .set ] && l_ld="%{l_ld}"
michael@13	470	[ ".%{?use_ld:set}" = .set ] && l_ld="%{use_ld}"
michael@13	471	if [ ".$l_ld" = . ]; then
michael@13	472	l_ld=`sh $shtool path ld`
michael@13	473	if [ ".$l_ld" = . ]; then
michael@13	474	echo "openpkg: prerequisite tool \`ld' not found"
michael@13	475	exit 1
michael@13	476	fi
michael@13	477	fi
michael@13	478	echo "l_ld=\"$l_ld\"; export l_ld" >>.buildenv
michael@13	479
michael@13	480	# manually make sure as(1) is available
michael@13	481	l_as=""; export l_as
michael@13	482	[ ".%{?l_as:set}" = .set ] && l_as="%{l_as}"
michael@13	483	[ ".%{?use_as:set}" = .set ] && l_as="%{use_as}"
michael@13	484	if [ ".$l_as" = . ]; then
michael@13	485	l_as=`sh $shtool path as`
michael@13	486	if [ ".$l_as" = . ]; then
michael@13	487	echo "openpkg: prerequisite tool \`as' not found"
michael@13	488	exit 1
michael@13	489	fi
michael@13	490	fi
michael@13	491	echo "l_as=\"$l_as\"; export l_as" >>.buildenv
michael@13	492
michael@13	493	# manually make sure strip(1) is available or use a null replacement
michael@13	494	l_strip=""; export l_strip
michael@13	495	[ ".%{?l_strip:set}" = .set ] && l_strip="%{l_strip}"
michael@13	496	[ ".%{?use_strip:set}" = .set ] && l_strip="%{use_strip}"
michael@13	497	if [ ".$l_strip" = . ]; then
michael@13	498	l_strip=`sh $shtool path strip ls`
michael@13	499	if [ ".$l_strip" = . ]; then
michael@13	500	echo "openpkg: prerequisite tool \`strip' not found"
michael@13	501	exit 1
michael@13	502	fi
michael@13	503	fi
michael@13	504	echo "l_strip=\"$l_strip\"; export l_strip" >>.buildenv
michael@13	505
michael@428	506	# determine path to etc.usrgrp.sh script
michael@428	507	usrgrp=`SOURCE etc.usrgrp.sh`
michael@13	508	echo "usrgrp=$usrgrp; export usrgrp" >>./.buildenv
michael@13	509
michael@13	510	# display verbosity header
michael@13	511	set +x; VERBOSE "PREPARATION: Determine OpenPKG User/Group Name/Id Pairs"; set -x
michael@13	512
michael@13	513	# determine user/group name/id pairs
michael@13	514	# - bootstrapping: %{l_[smrn]{usr,grp}} is set via sed(1)
michael@13	515	# - upgrading new: %{l_[smrn]{usr,grp}} is set via rpmmacros
michael@13	516	# - upgrading old: %{l_[smrn]{usr,grp}} is not set at all
michael@13	517	susr=""; [ ".%{?l_susr:set}" = .set ] && susr="%{l_susr}"
michael@13	518	sgrp=""; [ ".%{?l_sgrp:set}" = .set ] && sgrp="%{l_sgrp}"
michael@13	519	musr=""; [ ".%{?l_musr:set}" = .set ] && musr="%{l_musr}"
michael@13	520	mgrp=""; [ ".%{?l_mgrp:set}" = .set ] && mgrp="%{l_mgrp}"
michael@13	521	rusr=""; [ ".%{?l_rusr:set}" = .set ] && rusr="%{l_rusr}"
michael@13	522	rgrp=""; [ ".%{?l_rgrp:set}" = .set ] && rgrp="%{l_rgrp}"
michael@13	523	nusr=""; [ ".%{?l_nusr:set}" = .set ] && nusr="%{l_nusr}"
michael@13	524	ngrp=""; [ ".%{?l_ngrp:set}" = .set ] && ngrp="%{l_ngrp}"
michael@13	525	# corresponding ids
michael@13	526	suid=""; [ ".%{?l_suid:set}" = .set ] && suid="%{l_suid}"
michael@13	527	sgid=""; [ ".%{?l_sgid:set}" = .set ] && sgid="%{l_sgid}"
michael@13	528	muid=""; [ ".%{?l_muid:set}" = .set ] && muid="%{l_muid}"
michael@13	529	mgid=""; [ ".%{?l_mgid:set}" = .set ] && mgid="%{l_mgid}"
michael@13	530	ruid=""; [ ".%{?l_ruid:set}" = .set ] && ruid="%{l_ruid}"
michael@13	531	rgid=""; [ ".%{?l_rgid:set}" = .set ] && rgid="%{l_rgid}"
michael@13	532	nuid=""; [ ".%{?l_nuid:set}" = .set ] && nuid="%{l_nuid}"
michael@13	533	ngid=""; [ ".%{?l_ngid:set}" = .set ] && ngid="%{l_ngid}"
michael@13	534	# compat:
michael@13	535	usr=""; [ ".%{?l_fsusr:set}" = .set ] && usr="%{l_fsusr}"
michael@13	536	grp=""; [ ".%{?l_fsgrp:set}" = .set ] && grp="%{l_fsgrp}"
michael@13	537	eval `sh $usrgrp \
michael@13	538	--usr="$usr" --grp="$grp" \
michael@13	539	--susr="$susr" --sgrp="$sgrp" \
michael@13	540	--musr="$musr" --mgrp="$mgrp" \
michael@13	541	--rusr="$rusr" --rgrp="$rgrp" \
michael@13	542	--nusr="$nusr" --ngrp="$ngrp" \
michael@13	543	--suid="$suid" --sgid="$sgid" \
michael@13	544	--muid="$muid" --mgid="$mgid" \
michael@13	545	--ruid="$ruid" --rgid="$rgid" \
michael@13	546	--nuid="$nuid" --ngid="$ngid"`
michael@13	547	echo "susr=\"$susr\"; export susr" >>.buildenv
michael@13	548	echo "sgrp=\"$sgrp\"; export sgrp" >>.buildenv
michael@13	549	echo "musr=\"$musr\"; export musr" >>.buildenv
michael@13	550	echo "mgrp=\"$mgrp\"; export mgrp" >>.buildenv
michael@13	551	echo "rusr=\"$rusr\"; export rusr" >>.buildenv
michael@13	552	echo "rgrp=\"$rgrp\"; export rgrp" >>.buildenv
michael@13	553	echo "nusr=\"$nusr\"; export nusr" >>.buildenv
michael@13	554	echo "ngrp=\"$ngrp\"; export ngrp" >>.buildenv
michael@13	555	echo "suid=\"$suid\"; export suid" >>.buildenv
michael@13	556	echo "sgid=\"$sgid\"; export sgid" >>.buildenv
michael@13	557	echo "muid=\"$muid\"; export muid" >>.buildenv
michael@13	558	echo "mgid=\"$mgid\"; export mgid" >>.buildenv
michael@13	559	echo "ruid=\"$ruid\"; export ruid" >>.buildenv
michael@13	560	echo "rgid=\"$rgid\"; export rgid" >>.buildenv
michael@13	561	echo "nuid=\"$nuid\"; export nuid" >>.buildenv
michael@13	562	echo "ngid=\"$ngid\"; export ngid" >>.buildenv
michael@13	563
michael@13	564	# display verbosity header
michael@13	565	set +x; VERBOSE "PREPARATION: Determine OpenPKG Instance Environment"; set -x
michael@13	566
michael@13	567	# determine installation location id
michael@13	568	if [ ".%{?l_tag_fmt:set}" = .set ]; then
michael@13	569	tag="%{l_tag_fmt}"
michael@13	570	else
michael@13	571	tag="<compat>"
michael@13	572	fi
michael@13	573	echo "tag=\"$tag\"; export tag" >>.buildenv
michael@13	574
michael@13	575	# determine platform id
michael@13	576	s=`(uname -s) 2>/dev/null` || s='Unknown'
michael@13	577	r=`(uname -r) 2>/dev/null` || r='0.0'
michael@13	578	plid="${s}/${r}"
michael@13	579	echo "plid=\"$plid\"; export plid" >>.buildenv
michael@13	580
michael@444	581	# determine platform specific build environment
michael@13	582	case $plid in
michael@13	583	FreeBSD/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
michael@13	584	NetBSD/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
michael@13	585	Linux/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
michael@13	586	SunOS/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
michael@13	587	UnixWare/*) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
michael@13	588	AIX/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
michael@13	589	Darwin/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
michael@13	590	OSF1/V5.* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
michael@13	591	HP-UX/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
michael@13	592	IRIX*/6.* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
michael@428	593	CYGWIN*/* ) l_build_path="/bin:/usr/bin:/usr/sbin" ;;
michael@13	594	* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
michael@13	595	esac
michael@13	596	case $plid in
michael@13	597	FreeBSD/* ) l_build_ldlp="/lib:/usr/lib" ;;
michael@13	598	NetBSD/* ) l_build_ldlp="/lib:/usr/lib" ;;
michael@13	599	Linux/* ) l_build_ldlp="/lib:/usr/lib" ;;
michael@13	600	SunOS/* ) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
michael@13	601	UnixWare/*) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
michael@13	602	AIX/* ) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
michael@13	603	Darwin/* ) l_build_ldlp="/usr/lib" ;;
michael@13	604	OSF1/V5.* ) l_build_ldlp="/usr/lib" ;;
michael@13	605	HP-UX/* ) l_build_ldlp="/usr/lib" ;;
michael@13	606	IRIX*/6.* ) l_build_ldlp="/usr/lib" ;;
michael@428	607	CYGWIN*/* ) l_build_ldlp="/lib:/usr/lib" ;;
michael@13	608	* ) l_build_ldlp="/usr/lib" ;;
michael@13	609	esac
michael@13	610	case $plid in
michael@13	611	* ) l_build_ulim=":" ;;
michael@13	612	esac
michael@13	613	echo "l_build_path=\"$l_build_path\"; export l_build_path" >>.buildenv
michael@13	614	echo "l_build_ldlp=\"$l_build_ldlp\"; export l_build_ldlp" >>.buildenv
michael@13	615	echo "l_build_ulim=\"$l_build_ulim\"; export l_build_ulim" >>.buildenv
michael@13	616
michael@428	617	# ACTIVATE AGAIN AFTER ALL 4.2.5 VERSIONS WERE UPGRADED TO AT LEAST 4.2.7
michael@428	618	# determine status of unprivileged operation
michael@428	619	if [ ".%{?l_unprivileged:set}" = .set ]; then
michael@428	620	l_unprivileged="%{l_unprivileged}"
michael@428	621	else
michael@428	622	l_unprivileged="no"
michael@428	623	fi
michael@428	624	echo "l_unprivileged=\"$l_unprivileged\"; export l_unprivileged" >>.buildenv
michael@428	625
michael@13	626	# display verbosity header
michael@13	627	set +x; VERBOSE "PREPARATION: Build GNU gzip (Compression Tool)"; set -x
michael@13	628
michael@13	629	# bootstrap GNU zip tool
michael@13	630	${l_tar} xf `SOURCE gzip-%{V_gzip}.tar` 2>/dev/null || true
michael@13	631	( cd gzip-%{V_gzip}
michael@428	632	( echo "ac_cv_prog_cc_g=no"
michael@428	633	echo "ac_cv_header_getopt_h=no"
michael@428	634	) >config.cache
michael@13	635	case $plid in
michael@13	636	Darwin/* ) echo "gzip_cv_assembler=no" >>config.cache ;;
michael@13	637	esac
michael@13	638	CC="${l_cc}" \
michael@13	639	GREP="grep" \
michael@13	640	./configure \
michael@13	641	--cache-file=./config.cache
michael@13	642	${l_make} || exit $?
michael@13	643	( mv gzip ..; ${l_make} clean || true; mv ../gzip . ) || exit $?
michael@13	644	) || exit $?
michael@13	645	l_gzip="`pwd`/gzip-%{V_gzip}/gzip"; export l_gzip
michael@13	646	echo "l_gzip=\"$l_gzip\"; export l_gzip" >>.buildenv
michael@13	647
michael@13	648	# display verbosity header
michael@13	649	set +x; VERBOSE "PREPARATION: Unpack GNU configuration guessing utilities"; set -x
michael@13	650
michael@13	651	# unpack GNU config.guess
michael@13	652	${l_gzip} -dc `SOURCE config-%{V_config}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	653
michael@13	654	# display verbosity header
michael@13	655	set +x; VERBOSE "PREPARATION: Build GNU patch (Source Patching Tool)"; set -x
michael@13	656
michael@13	657	# bootstrap GNU patch tool
michael@13	658	${l_gzip} -dc `SOURCE patch-%{V_patch}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	659	( cd patch-%{V_patch}
michael@428	660	chmod a+x install-sh
michael@428	661	echo '#!' >update-version.sh
michael@428	662	cp `SOURCE patch.Makefile.in` Makefile.in
michael@428	663	cp `SOURCE patch.strnlen.c` gl/lib/strnlen.c
michael@13	664	( echo 'ac_cv_func_setmode=${ac_cv_func_setmode=no}'
michael@13	665	echo 'ac_cv_prog_cc_g=no'
michael@13	666	false=`sh $shtool path false`
michael@13	667	echo "ac_cv_path_ed_PROGRAM=\${ac_cv_path_ed_PROGRAM=$false}"
michael@13	668	) >config.cache
michael@13	669	CC="${l_cc}" \
michael@13	670	./configure \
michael@13	671	--cache-file=./config.cache \
michael@428	672	--enable-merge \
michael@13	673	--disable-largefile
michael@13	674	${l_make} || exit $?
michael@250	675	( mv src/patch ..; ${l_make} clean || true; mv ../patch . ) || exit $?
michael@13	676	) || exit $?
michael@13	677	l_patch="`pwd`/patch-%{V_patch}/patch"; export l_patch
michael@428	678	case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
michael@428	679	*-cygwin* )
michael@428	680	# Cygwin under Windows Vista dislikes executables with
michael@428	681	# "patch" in the same and would require a "*.manifest"
michael@428	682	# file applied with the "mt.exe" from the "Windows
michael@428	683	# Software Development Kit (SDK)" in order to escape from
michael@428	684	# UAC. An easy alternative is to just rename the file to a
michael@428	685	# different name.
michael@428	686	mv patch-%{V_patch}/patch patch-%{V_patch}/pitch
michael@428	687	l_patch="`pwd`/patch-%{V_patch}/pitch"
michael@428	688	;;
michael@428	689	esac
michael@13	690	echo "l_patch=\"$l_patch\"; export l_patch" >>.buildenv
michael@13	691
michael@13	692	# display verbosity header
michael@13	693	set +x; VERBOSE "BUILD: Build GNU tar (Archiving Tool)"; set -x
michael@13	694
michael@13	695	# build GNU tar tool
michael@13	696	${l_gzip} -dc `SOURCE tar-%{V_tar}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	697	( cd tar-%{V_tar}
michael@13	698	${l_patch} -p0 <`SOURCE tar.patch`
michael@13	699	( echo 'am_cv_func_iconv=no'
michael@13	700	echo 'am_cv_lib_iconv=no'
michael@13	701	echo 'ac_cv_lib_iconv_iconv=no'
michael@13	702	echo 'ac_cv_header_iconv_h=no'
michael@13	703	echo 'ac_cv_type_iconv_t=no'
michael@13	704	) >config.cache
michael@13	705	CC="${l_cc}" \
michael@13	706	MAKEINFO="true" \
michael@13	707	GREP="grep" \
michael@428	708	FORCE_UNSAFE_CONFIGURE=1 \
michael@13	709	./configure \
michael@13	710	--cache-file=./config.cache \
michael@13	711	--prefix=%{l_prefix} \
michael@428	712	--with-gzip=%{l_prefix}/lib/openpkg/gzip \
michael@428	713	--with-bzip2=%{l_prefix}/lib/openpkg/bzip2 \
michael@13	714	--disable-nls
michael@13	715	${l_make} || exit $?
michael@13	716	( mv src/tar ..; ${l_make} clean || true; mv ../tar . ) || exit $?
michael@13	717	) || exit $?
michael@13	718	l_tar="`pwd`/tar-%{V_tar}/tar"; export l_tar
michael@13	719	echo "l_tar=\"$l_tar\"; export l_tar" >>.buildenv
michael@13	720
michael@13	721	# display verbosity header
michael@13	722	set +x; VERBOSE "PREPARATION: Unpack Distribution Tarballs"; set -x
michael@13	723
michael@13	724	# unpack distribution tarballs
michael@428	725	${l_gzip} -dc `SOURCE rpm-%{V_rpm_major}.%{V_rpm_minor}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@428	726	${l_gzip} -dc `SOURCE popt-%{V_popt}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@428	727	${l_gzip} -dc `SOURCE sqlite-%{V_sqlite}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	728	${l_gzip} -dc `SOURCE zlib-%{V_zlib}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	729	${l_gzip} -dc `SOURCE bzip2-%{V_bzip2}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@428	730	${l_gzip} -dc `SOURCE xz-%{V_xz}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	731	${l_gzip} -dc `SOURCE curl-%{V_curl}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@428	732	${l_gzip} -dc `SOURCE pcre-%{V_pcre}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	733	${l_gzip} -dc `SOURCE make-%{V_make}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	734	${l_gzip} -dc `SOURCE bash-%{V_bash}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	735	${l_gzip} -dc `SOURCE uuid-%{V_uuid}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	736	${l_gzip} -dc `SOURCE beecrypt-%{V_beecrypt}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	737	${l_gzip} -dc `SOURCE perl-%{V_perl}-mini.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	738	${l_gzip} -dc `SOURCE openssl-%{V_openssl}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@428	739	${l_gzip} -dc `SOURCE libarchive-%{V_libarchive}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@428	740	${l_gzip} -dc `SOURCE diffutils-%{V_diffutils}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@428	741	${l_gzip} -dc `SOURCE svs-%{V_svs}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
michael@13	742
michael@13	743	# update config.guess/config.sub
michael@428	744	for dir in curl-%{V_curl} make-%{V_make} bash-%{V_bash}/support; do
michael@13	745	chmod u+w $dir/config.guess $dir/config.sub >/dev/null 2>&1 || true
michael@13	746	cp config/config.guess $dir/
michael@13	747	cp config/config.sub $dir/
michael@13	748	done
michael@13	749
michael@13	750	# display verbosity header
michael@13	751	set +x; VERBOSE "PREPARATION: Apply OpenPKG Patches to Distributions"; set -x
michael@13	752
michael@13	753	# apply OpenPKG patches to distribution trees
michael@428	754	( cd rpm-%{V_rpm_major}.%{V_rpm_minor}
michael@428	755	sed -e "s;@l_prefix@;%{l_prefix};g" <`SOURCE rpm.patch` | ${l_patch} -p0
michael@13	756	) || exit $?
michael@13	757	( cd make-%{V_make}
michael@13	758	${l_patch} -p0 <`SOURCE make.patch`
michael@13	759	) || exit $?
michael@13	760	( cd bash-%{V_bash}
michael@13	761	${l_patch} -p0 <`SOURCE bash.patch`
michael@428	762	${l_patch} -p0 <`SOURCE bash.patch.vendor`
michael@13	763	sleep 1
michael@13	764	touch y.tab.[ch]
michael@13	765	touch configure config.h.in
michael@13	766	) || exit $?
michael@13	767	( cd beecrypt-%{V_beecrypt}
michael@13	768	${l_patch} -p0 <`SOURCE beecrypt.patch`
michael@13	769	) || exit $?
michael@13	770	( cd perl-%{V_perl}
michael@13	771	${l_patch} -p0 <`SOURCE perl.patch`
michael@13	772	) || exit $?
michael@13	773	( cd openssl-%{V_openssl}
michael@13	774	${l_patch} -p0 <`SOURCE openssl.patch`
michael@13	775	) || exit $?
michael@428	776	( cd popt-%{V_popt}
michael@428	777	${l_patch} -p0 <`SOURCE popt.patch`
michael@428	778	) || exit $?
michael@428	779	( cd sqlite-%{V_sqlite}
michael@428	780	${l_patch} -p0 <`SOURCE sqlite.patch`
michael@428	781	) || exit $?
michael@428	782	( cd curl-%{V_curl}
michael@428	783	${l_patch} -p0 <`SOURCE curl.patch`
michael@428	784	) || exit $?
michael@428	785	( cd pcre-%{V_pcre}
michael@428	786	${l_patch} -p0 <`SOURCE pcre.patch`
michael@428	787	) || exit $?
michael@428	788	( cd diffutils-%{V_diffutils}
michael@428	789	${l_patch} -p0 <`SOURCE diffutils.patch`
michael@428	790	) || exit $?
michael@428	791	( cd libarchive-%{V_libarchive}
michael@428	792	${l_patch} -p0 <`SOURCE libarchive.patch`
michael@428	793	) || exit $?
michael@428	794	( cd zlib-%{V_zlib}
michael@428	795	${l_patch} -p0 <`SOURCE zlib.patch`
michael@428	796	) || exit $?
michael@428	797	( cd xz-%{V_xz}
michael@428	798	${l_patch} -p0 <`SOURCE xz.patch`
michael@428	799	) || exit $?
michael@13	800
michael@13	801	# display verbosity header
michael@13	802	set +x; VERBOSE "PREPARATION: Build GNU make (Build Tool)"; set -x
michael@13	803
michael@13	804	# bootstrap GNU make tool
michael@13	805	( cd make-%{V_make}
michael@13	806	CC="${l_cc}" \
michael@13	807	./configure \
michael@13	808	--without-libiconv-prefix \
michael@13	809	--without-libintl-prefix \
michael@13	810	--disable-nls \
michael@13	811	--disable-largefile
michael@13	812	${l_make}
michael@13	813	( mv make ..; ${l_make} clean || true; mv ../make . ) || exit $?
michael@13	814	) || exit $?
michael@13	815	l_make="`pwd`/make-%{V_make}/make"; export l_make
michael@13	816	echo "l_make=\"$l_make\"; export l_make" >>.buildenv
michael@13	817
michael@13	818	%build
michael@13	819	# skip in bootstrap phase 2 (see openpkg.boot)
michael@13	820	[ ".$OPENPKG_BOOT" = .1 ] && exit 0
michael@13	821
michael@13	822	# switch into a temporary build area
michael@13	823	cd openpkg-%{version}
michael@13	824	. ./.buildenv
michael@13	825
michael@13	826	# display verbosity header
michael@444	827	set +x; VERBOSE "BUILD: Build GNU bash (Bourne-again Shell)"; set -x
michael@13	828
michael@13	829	# build GNU bash tool
michael@13	830	( cd bash-%{V_bash}
michael@13	831	sh $shtool subst \
michael@13	832	-e 's;@l_openpkg_release@;OpenPKG;' \
michael@13	833	version.c
michael@444	834	( # force disabled wide character support
michael@13	835	echo "ac_cv_header_wchar_h=no"
michael@13	836	echo "ac_cv_header_wctype_h=no"
michael@13	837	echo "ac_cv_func_mbsrtowcs=no"
michael@13	838	# force disabled internationalization support
michael@13	839	echo "ac_cv_header_libintl_h=no"
michael@13	840	echo "ac_cv_func_gettext=no"
michael@13	841	echo "ac_cv_func_textdomain=no"
michael@13	842	echo "ac_cv_func_bindtextdomain=no"
michael@13	843	echo "ac_cv_lib_intl_bindtextdomain=no"
michael@13	844	# disable building with debug symbols
michael@13	845	echo "ac_cv_prog_cc_g=no"
michael@13	846	) >config.cache
michael@428	847	AUTOCONF="true"
michael@428	848	export AUTOCONF
michael@428	849	CC="${l_cc}"
michael@428	850	export CC
michael@428	851	case "$plid" in
michael@472	852	Darwin/* ) LDFLAGS="-Wl,-search_paths_first" ;;
michael@428	853	esac
michael@13	854	./configure \
michael@13	855	--cache-file=./config.cache \
michael@13	856	--prefix=%{l_prefix} \
michael@13	857	--without-curses \
michael@13	858	--without-gnu-malloc \
michael@13	859	--disable-nls
michael@13	860	${l_make} || exit $?
michael@13	861	( mv bash ..; ${l_make} clean || true; mv ../bash . ) || exit $?
michael@13	862	) || exit $?
michael@13	863
michael@13	864	# display verbosity header
michael@13	865	set +x; VERBOSE "BUILD: Build GNU bzip2 (Compression Library)"; set -x
michael@13	866
michael@13	867	# build BZIP2 library
michael@13	868	( cd bzip2-%{V_bzip2}
michael@472	869	${l_make} CC="${l_cc}" CFLAGS="-O" libbz2.a bzip2 || exit $?
michael@13	870	( echo "# libbz2.la - a libtool library file"
michael@13	871	echo "# Generated by ltmain.sh - GNU libtool x.x.x"
michael@13	872	echo "dlname=''"
michael@13	873	echo "library_names=''"
michael@13	874	echo "old_library='libbz2.a'"
michael@13	875	echo "dependency_libs=''"
michael@13	876	echo "current=0"
michael@13	877	echo "age=0"
michael@13	878	echo "revision=0"
michael@13	879	echo "installed=no"
michael@13	880	echo "dlopen=''"
michael@13	881	echo "dlpreopen=''"
michael@13	882	echo "libdir='%{l_prefix}'"
michael@13	883	) >libbz2.la
michael@13	884	ln -s . .libs
michael@13	885	) || exit $?
michael@13	886
michael@13	887	# display verbosity header
michael@13	888	set +x; VERBOSE "BUILD: Build Zlib (Compression Library)"; set -x
michael@13	889
michael@13	890	# build ZLIB library
michael@13	891	( cd zlib-%{V_zlib}
michael@472	892	CC="${l_cc}" CFLAGS="-O" ./configure
michael@13	893	${l_make} CC="${l_cc}" libz.a || exit $? # intentionally do not pass CFLAGS here
michael@13	894	) || exit $?
michael@13	895
michael@13	896	# display verbosity header
michael@428	897	set +x; VERBOSE "BUILD: Build XZ (Compression Library)"; set -x
michael@428	898
michael@428	899	# build XZ library
michael@428	900	( cd xz-%{V_xz}
michael@428	901	opts=""
michael@428	902	case "$plid" in
michael@428	903	Darwin/* ) opts="--disable-assembler" ;;
michael@428	904	esac
michael@428	905	CC="${l_cc}" \
michael@472	906	CFLAGS="-O" \
michael@428	907	./configure \
michael@428	908	--prefix=%{l_prefix} \
michael@429	909	--libdir="%{l_prefix}/lib" \
michael@428	910	--mandir=%{l_prefix}/man \
michael@428	911	--without-libiconv-prefix \
michael@428	912	--without-libintl-prefix \
michael@428	913	--disable-nls \
michael@428	914	--disable-shared \
michael@428	915	$opts
michael@428	916	${l_make} || exit $?
michael@428	917	) || exit $?
michael@428	918
michael@428	919	# display verbosity header
michael@13	920	set +x; VERBOSE "BUILD: Build OSSP uuid (UUID Generation Tool)"; set -x
michael@13	921
michael@13	922	# build OSSP uuid tool
michael@13	923	( cd uuid-%{V_uuid}
michael@13	924	CC="${l_cc}" \
michael@472	925	CFLAGS="-O" \
michael@13	926	GREP="grep" \
michael@13	927	./configure \
michael@13	928	--prefix=%{l_prefix} \
michael@13	929	--disable-shared
michael@13	930	${l_make} || exit $?
michael@13	931	) || exit $?
michael@13	932
michael@13	933	# display verbosity header
michael@13	934	set +x; VERBOSE "BUILD: Build Perl (Programming Language)"; set -x
michael@13	935
michael@13	936	# build Perl tool
michael@13	937	( cd perl-%{V_perl}
michael@13	938	chmod -R u+w .
michael@13	939	sh $shtool subst \
michael@13	940	-e 's;\(.*for thislib in $libswanted.*\);libswanted=`echo " $libswanted " | sed -e "s/ bind / /g" -e "s/ db / /g" -e "s/ gdbm / /g" -e "s/ iconv / /g"`\; \1;' \
michael@13	941	-e 's;package=perl5;package=perl;' \
michael@13	942	Configure
michael@13	943	sh $shtool subst \
michael@13	944	-e 's; */usr/local/lib;;' \
michael@13	945	hints/freebsd.sh hints/netbsd.sh
michael@13	946	libdirs=""
michael@13	947	for dir in %{l_prefix}/lib /lib64 /usr/lib64 /lib /usr/lib /usr/ccs/lib; do
michael@13	948	[ -d $dir ] && libdirs="$libdirs $dir"
michael@13	949	done
michael@13	950	./Configure \
michael@13	951	-d -e -s \
michael@13	952	-Dprefix=%{l_prefix} \
michael@13	953	-Dvendorprefix=%{l_prefix} \
michael@13	954	-Dinstallprefix=%{l_prefix} \
michael@13	955	-Dinstallstyle="lib/perl5" \
michael@13	956	-Dman1dir=%{l_prefix}/man/man1 \
michael@13	957	-Dman3dir=%{l_prefix}/man/man3 \
michael@13	958	-Dcc="${l_cc}" -Uoptimize \
michael@13	959	-Dlocincpth="%{l_prefix}/include" \
michael@13	960	-Dloclibpth="%{l_prefix}/lib" \
michael@652	961	-Dlibs="-lm" \
michael@13	962	-Dldflags="-L""%{l_prefix}/lib" \
michael@13	963	-Dlibpth="$libdirs" \
michael@13	964	-Dglibpth="$libdirs" \
michael@13	965	-Dscriptdir="%{l_prefix}/bin" \
michael@13	966	-Uinstallusrbinperl \
michael@13	967	-Adefine:useshrplib='false' \
michael@13	968	-Ui_malloc -Ui_iconv -Ui_db
michael@428	969	case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
michael@428	970	*-cygwin* ) miniperl="miniperl.exe" ;;
michael@428	971	* ) miniperl="miniperl" ;;
michael@428	972	esac
michael@428	973	${l_make} $miniperl || exit $?
michael@13	974	rm -f *.o >/dev/null 2>&1 || true
michael@13	975	) || exit $?
michael@13	976	l_perl="`pwd`/perl-%{V_perl}/miniperl"; export l_perl
michael@13	977	echo "l_perl=\"$l_perl\"; export l_perl" >>.buildenv
michael@13	978
michael@13	979	# display verbosity header
michael@13	980	set +x; VERBOSE "BUILD: Build OpenSSL (Crypography and SSL/TLS Toolkit)"; set -x
michael@13	981
michael@13	982	# build OpenSSL toolkit
michael@13	983	( cd openssl-%{V_openssl}
michael@13	984	sh $shtool subst \
michael@472	985	-e 's;-m64 *;;g' \
michael@472	986	-e 's;-xarch=amd64 *;;g' \
michael@13	987	-e 's;-m486;-march=i486;g' \
michael@13	988	-e 's;BN_LLONG *;;' \
michael@13	989	Configure
michael@13	990	sh $shtool subst \
michael@13	991	-e 's;test "$OSTYPE" = msdosdjgpp;true;' \
michael@13	992	util/point.sh
michael@13	993	sh $shtool subst \
michael@13	994	-e "1s;^.*\$;#!$l_perl;" \
michael@13	995	Configure `find . -name "*.pl" -print`
michael@13	996	opts=""
michael@13	997	case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
michael@13	998	*-solaris* ) opts="-lnsl -lsocket" ;;
michael@13	999	esac
michael@13	1000	case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
michael@13	1001	amd64-* ) opts="$opts -fPIC" ;;
michael@13	1002	ia64-* ) opts="$opts -fPIC" ;;
michael@13	1003	sparc64-freebsd* ) opts="$opts -fPIC" ;;
michael@13	1004	esac
michael@13	1005	CC="${l_cc}" \
michael@13	1006	PERL="${l_perl}" \
michael@13	1007	./config \
michael@13	1008	--prefix=%{l_prefix} \
michael@13	1009	no-asm no-shared no-dso \
michael@13	1010	no-zlib no-idea no-threads no-krb5 no-hw \
michael@13	1011	$opts
michael@13	1012	${l_make} CC="${l_cc}" build_libs build_apps || exit $?
michael@13	1013	( mkdir lib; cd lib; ln -s ../lib*.a . ) || exit $?
michael@13	1014	) || exit $?
michael@13	1015
michael@428	1016	# build BSD libarchive
michael@428	1017	( cd libarchive-%{V_libarchive}
michael@438	1018	sh $shtool subst \
michael@438	1019	-e 's;\(AM_CFLAGS =\) -Wall;\1;' \
michael@438	1020	Makefile.in
michael@428	1021	CC="${l_cc}" \
michael@472	1022	CFLAGS="-O -D_POSIX_PTHREAD_SEMANTICS" \
michael@428	1023	CPPFLAGS="-I`pwd`/../zlib-%{V_zlib} -I`pwd`/../bzip2-%{V_bzip2} -I`pwd`/../xz-%{V_xz}/src/liblzma/api -I`pwd`/../openssl-%{V_openssl}/include" \
michael@472	1024	LDFLAGS="-L`pwd`/../zlib-%{V_zlib} -L`pwd`/../bzip2-%{V_bzip2} -L`pwd`/../xz-%{V_xz}/src/liblzma/.libs -L`pwd`/../openssl-%{V_openssl}" \
michael@428	1025	GREP="grep" \
michael@428	1026	./configure \
michael@428	1027	--prefix=%{l_prefix} \
michael@429	1028	--libdir="%{l_prefix}/lib" \
michael@428	1029	--enable-bsdtar \
michael@428	1030	--enable-bsdcpio \
michael@428	1031	--with-zlib \
michael@428	1032	--with-bz2lib \
michael@428	1033	--with-lzma \
michael@428	1034	--without-lzmadec \
michael@428	1035	--with-openssl \
michael@428	1036	--without-xml2 \
michael@428	1037	--without-expat \
michael@428	1038	--without-iconv \
michael@428	1039	--disable-shared
michael@428	1040	${l_make} || exit $?
michael@428	1041	( mv bsdcpio bsdtar ..; ${l_make} clean || true; mv ../bsdcpio ../bsdtar . ) || exit $?
michael@428	1042	) || exit $?
michael@428	1043
michael@428	1044	# build GNU diffutils
michael@428	1045	( cd diffutils-%{V_diffutils}
michael@428	1046	CC="${l_cc}" \
michael@472	1047	CFLAGS="-O" \
michael@428	1048	./configure \
michael@428	1049	--prefix=%{l_prefix} \
michael@428	1050	--disable-nls
michael@439	1051	touch man/diff.1 man/diff3.1 && ${l_make} || exit $?
michael@428	1052	( mv src/diff src/diff3 src/sdiff src/cmp ..
michael@428	1053	${l_make} clean || true
michael@428	1054	mv ../diff ../diff3 ../sdiff ../cmp .
michael@428	1055	) || exit $?
michael@428	1056	) || exit $?
michael@428	1057
michael@13	1058	# display verbosity header
michael@13	1059	set +x; VERBOSE "BUILD: Build cURL (URL Fetching Tool)"; set -x
michael@13	1060
michael@13	1061	# build cURL tool
michael@13	1062	( cd curl-%{V_curl}
michael@13	1063	( echo 'ac_cv_header_openssl_engine_h=no'
michael@13	1064	echo 'lt_cv_prog_compiler_c_o_F77=no'
michael@13	1065	echo 'lt_cv_sys_max_cmd_len=100'
michael@13	1066	) >config.cache
michael@13	1067	CC="${l_cc}" \
michael@472	1068	CFLAGS="-I`pwd`/../zlib-%{V_zlib}" \
michael@13	1069	CPPFLAGS="-I`pwd`/../zlib-%{V_zlib}" \
michael@472	1070	LDFLAGS="-L`pwd`/../zlib-%{V_zlib}" \
michael@13	1071	GREP="grep" \
michael@13	1072	./configure \
michael@13	1073	--cache-file=./config.cache \
michael@429	1074	--libdir="%{l_prefix}/lib" \
michael@13	1075	--without-libidn \
michael@13	1076	--disable-shared \
michael@13	1077	--disable-thread \
michael@13	1078	--disable-ipv6 \
michael@13	1079	--disable-ldap \
michael@13	1080	--with-zlib=`pwd`/../zlib-%{V_zlib} \
michael@13	1081	--with-ssl=`pwd`/../openssl-%{V_openssl} \
michael@13	1082	--with-ca-bundle=%{l_prefix}/etc/openpkg/openpkg.x509
michael@13	1083	${l_make} || exit $?
michael@428	1084	mv src/curl ..; ${l_make} clean || true; mv ../curl .
michael@428	1085	) || exit $?
michael@428	1086
michael@428	1087	# build PCRE library
michael@428	1088	( cd pcre-%{V_pcre}
michael@428	1089	CC="${l_cc}" \
michael@472	1090	CFLAGS="-O" \
michael@428	1091	GREP="grep" \
michael@428	1092	./configure \
michael@428	1093	--disable-cpp \
michael@428	1094	--disable-utf8 \
michael@428	1095	--disable-shared
michael@428	1096	${l_make} || exit $?
michael@13	1097	) || exit $?
michael@13	1098
michael@13	1099	# display verbosity header
michael@13	1100	set +x; VERBOSE "BUILD: Build BeeCrypt (Cryptography Library)"; set -x
michael@13	1101
michael@13	1102	# build BeeCrypt library
michael@13	1103	( cd beecrypt-%{V_beecrypt}
michael@13	1104	sh $shtool subst \
michael@13	1105	-e 's;^[ ][ ]*#;#;' \
michael@428	1106	aes.c base64.c blockmode.c blowfish.c entropy.c fips186.c md4.c md5.c \
michael@428	1107	mp.c mtprng.c ripemd128.c ripemd160.c ripemd256.c ripemd320.c rsa.c \
michael@428	1108	sha1.c sha224.c sha256.c sha2k64.c sha384.c sha512.c timestamp.c
michael@13	1109	sh $shtool subst \
michael@13	1110	-e 's;cppglue\.lo;;g' \
michael@13	1111	-e 's;cppglue\.cxx;;g' \
michael@13	1112	-e '/^CXX = /s;@CXX@;@CC@;g' \
michael@13	1113	Makefile.in
michael@13	1114	( echo 'ac_cv_have_dev_dsp=no'
michael@13	1115	echo 'ac_cv_have_dev_audio=no'
michael@13	1116	echo 'ac_cv_func_gettimeofday=yes'
michael@13	1117	echo 'bc_cv_as_noexecstack=no'
michael@13	1118	) >config.cache
michael@13	1119	CC="${l_cc}" \
michael@472	1120	CFLAGS="-O" \
michael@13	1121	./configure \
michael@13	1122	--cache-file=./config.cache \
michael@13	1123	--prefix=%{l_prefix} \
michael@429	1124	--libdir="%{l_prefix}/lib" \
michael@428	1125	--with-cpu=none \
michael@428	1126	--with-arch=none \
michael@13	1127	--without-cplusplus \
michael@13	1128	--without-java \
michael@13	1129	--without-python \
michael@428	1130	--disable-expert-mode \
michael@428	1131	--disable-aio \
michael@428	1132	--disable-openmp \
michael@13	1133	--disable-threads \
michael@13	1134	--disable-shared
michael@13	1135	${l_make} || exit $?
michael@13	1136	cp .libs/libbeecrypt.a .
michael@13	1137	) || exit $?
michael@13	1138
michael@13	1139	# display verbosity header
michael@428	1140	set +x; VERBOSE "BUILD: Build POPT (Option Parsing Library)"; set -x
michael@428	1141
michael@428	1142	# build POPT library
michael@428	1143	( cd popt-%{V_popt}
michael@428	1144	CC="${l_cc}" \
michael@472	1145	CFLAGS="-O" \
michael@428	1146	CPPFLAGS="-DOPENPKG -DPOPT_fprintf=fprintf" \
michael@428	1147	GREP="grep" \
michael@428	1148	./configure \
michael@428	1149	--prefix=%{l_prefix} \
michael@429	1150	--libdir="%{l_prefix}/lib" \
michael@428	1151	--disable-shared \
michael@428	1152	--with-included-gettext \
michael@428	1153	--without-libintl-prefix \
michael@428	1154	--without-libiconv-prefix \
michael@428	1155	--disable-nls
michael@428	1156	${l_make}
michael@428	1157	) || exit $?
michael@428	1158
michael@428	1159	# display verbosity header
michael@428	1160	set +x; VERBOSE "BUILD: Build SQLite (RDBMS Library)"; set -x
michael@428	1161
michael@428	1162	# build SQLite library
michael@428	1163	( cd sqlite-%{V_sqlite}
michael@428	1164	CC="${l_cc}" \
michael@472	1165	CFLAGS="-O" \
michael@428	1166	LIBS="-lm" \
michael@428	1167	GREP="grep" \
michael@428	1168	./configure \
michael@428	1169	--prefix=%{l_prefix} \
michael@429	1170	--libdir="%{l_prefix}/lib" \
michael@428	1171	--disable-threadsafe \
michael@428	1172	--disable-readline \
michael@428	1173	--disable-debug \
michael@428	1174	--disable-amalgamation \
michael@428	1175	--disable-tcl \
michael@428	1176	--disable-shared
michael@428	1177	${l_make}
michael@428	1178	) || exit $?
michael@428	1179
michael@428	1180	# display verbosity header
michael@13	1181	set +x; VERBOSE "BUILD: Build RPM (RPM Package Manager)"; set -x
michael@13	1182
michael@13	1183	# build RPM
michael@13	1184	( br=`pwd`
michael@428	1185	cd rpm-%{V_rpm_major}.%{V_rpm_minor}
michael@13	1186
michael@436	1187	# remove unused and undefined methods
michael@436	1188	sh $shtool subst \
michael@436	1189	-e 's;^\(#include *<[^>][^>]*>\);/*\1*/;g' \
michael@436	1190	rpmconstant/rpmconstant.h
michael@436	1191
michael@470	1192	# Avoid bugs causing 'fatal problems'
michael@470	1193	sh $shtool subst \
michael@470	1194	-e 's;\(rc = INTEGRITY\)_ERROR;\1_OK;g' \
michael@470	1195	-e 's;integrity_check_message("%s\\n", result);((void)0);g' \
michael@470	1196	rpmqv.c
michael@470	1197
michael@435	1198	# provide nonstandard constructs
michael@435	1199	cat > nonstandard.h <<EOF
michael@435	1200	/* MSvB: define missing nonstandard GCC builtin extensions */
michael@435	1201	#ifndef __GNUC__
michael@435	1202	#define __builtin_expect(e,n) (e)
michael@435	1203	#endif /* ifndef __GNUC__ */
michael@435	1204	EOF
michael@435	1205
michael@13	1206	# cheat GNU Autoconf
michael@13	1207	( echo 'ac_cv_path_MSGFMT=:'
michael@13	1208	echo 'ac_cv_path_GMSGFMT=:'
michael@13	1209	echo 'ac_cv_path_XGETTEXT=:'
michael@13	1210	echo 'ac_cv_path_MSGMERGE=:'
michael@13	1211	echo "ac_cv_header_getopt_h=no"
michael@428	1212	echo "ac_cv_lib_gz_gzread=no"
michael@13	1213	) >config.cache
michael@13	1214
michael@428	1215	# use miniperl
michael@428	1216	PERL="${l_perl}"
michael@428	1217	export PERL
michael@13	1218
michael@13	1219	# set build tool flags
michael@13	1220	CC="${l_cc}"
michael@472	1221	CFLAGS=""
michael@428	1222	CPPFLAGS="-DRPM_VENDOR_OPENPKG"
michael@472	1223	LDFLAGS=""
michael@428	1224	LIBS=""
michael@428	1225	LIBS="$LIBS -lm"
michael@428	1226	export CC
michael@428	1227	export CFLAGS
michael@428	1228	export CPPFLAGS
michael@428	1229	export LDFLAGS
michael@428	1230	export LIBS
michael@13	1231
michael@428	1232	# special platform workarounds
michael@428	1233	GREP="grep"
michael@428	1234	export GREP
michael@428	1235
michael@428	1236	# determine POPT option, RPM macros and Lua script file paths
michael@428	1237	RPMPOPT="%{l_prefix}/lib/openpkg/rpmpopt"
michael@428	1238	RPMPOPT="$RPMPOPT:%{l_prefix}/etc/openpkg/rpmpopt"
michael@428	1239	RPMPOPT="$RPMPOPT:%{l_prefix}/etc/openpkg/rpmpopt.d/*"
michael@428	1240	RPMPOPT="$RPMPOPT:~/.openpkg/rpmpopt"
michael@428	1241	RPMPOPT="$RPMPOPT:@../../.openpkg/rpmpopt"
michael@428	1242	RPMPOPT="$RPMPOPT:@../.openpkg/rpmpopt"
michael@428	1243	RPMPOPT="$RPMPOPT:@./.openpkg/rpmpopt"
michael@428	1244	RPMMACROS="%{l_prefix}/lib/openpkg/rpmmacros"
michael@428	1245	RPMMACROS="$RPMMACROS:%{l_prefix}/etc/openpkg/rpmmacros"
michael@428	1246	RPMMACROS="$RPMMACROS:%{l_prefix}/etc/openpkg/rpmmacros.d/*"
michael@428	1247	RPMMACROS="$RPMMACROS:~/.openpkg/rpmmacros"
michael@428	1248	RPMMACROS="$RPMMACROS:@../../.openpkg/rpmmacros"
michael@428	1249	RPMMACROS="$RPMMACROS:@../.openpkg/rpmmacros"
michael@428	1250	RPMMACROS="$RPMMACROS:@./.openpkg/rpmmacros"
michael@428	1251	RPMLUA="%{l_prefix}/lib/openpkg/rpmlua"
michael@428	1252	RPMLUA="$RPMLUA:%{l_prefix}/etc/openpkg/rpmlua"
michael@428	1253	RPMLUA="$RPMLUA:%{l_prefix}/etc/openpkg/rpmlua.d/*"
michael@428	1254	RPMLUA="$RPMLUA:~/.openpkg/rpmlua"
michael@428	1255	RPMLUA="$RPMLUA:@../../.openpkg/rpmlua"
michael@428	1256	RPMLUA="$RPMLUA:@../.openpkg/rpmlua"
michael@428	1257	RPMLUA="$RPMLUA:@./.openpkg/rpmlua"
michael@428	1258
michael@428	1259	# parametrize integrity checking framework
michael@13	1260	sh $shtool subst \
michael@428	1261	-e "s;0000000000000000000000000000000000000000;7D121A8FC05DC18A4329E9EF67042EC961B7AE34;" \
michael@428	1262	-e "s;0\\.0\\.0;0.9.0;" \
michael@428	1263	rpmqv.c
michael@428	1264
michael@428	1265	# disable building of any tests
michael@428	1266	# (mainly because those would fail because of integrity checking anyway)
michael@13	1267	sh $shtool subst \
michael@428	1268	-e 's;tools scripts tests doc;tools scripts doc;' \
michael@333	1269	Makefile.in
michael@13	1270
michael@428	1271	# configure program
michael@428	1272	./configure \
michael@13	1273	--cache-file=./config.cache \
michael@13	1274	--prefix=%{l_prefix} \
michael@429	1275	--libdir="%{l_prefix}/lib" \
michael@428	1276	--mandir="%{l_prefix}/man" \
michael@428	1277	--includedir="%{l_prefix}/include/openpkg" \
michael@428	1278	--with-name="OpenPKG RPM" \
michael@428	1279	--with-path-cfg="%{l_prefix}/etc/openpkg" \
michael@428	1280	--with-path-rpmpopt="$RPMPOPT" \
michael@428	1281	--with-path-macros="$RPMMACROS" \
michael@428	1282	--with-path-rpmlua="$RPMLUA" \
michael@428	1283	--with-path-lib="%{l_prefix}/lib/openpkg" \
michael@428	1284	--with-path-locale="%{l_prefix}/share/openpkg/locale" \
michael@428	1285	--with-path-database="%{l_prefix}/RPM/DB" \
michael@428	1286	--with-path-sources="%{l_prefix}/RPM" \
michael@428	1287	--with-bugreport="openpkg-users@openpkg.org" \
michael@428	1288	--with-beecrypt="$br/beecrypt-%{V_beecrypt}" \
michael@428	1289	--with-openssl="$br/openssl-%{V_openssl}" \
michael@428	1290	--with-zlib="$br/zlib-%{V_zlib}" \
michael@428	1291	--with-bzip2="$br/bzip2-%{V_bzip2}" \
michael@428	1292	--with-popt="$br/popt-%{V_popt}" \
michael@428	1293	--with-sqlite="$br/sqlite-%{V_sqlite}" \
michael@428	1294	--with-pcre="$br/pcre-%{V_pcre}" \
michael@428	1295	--with-uuid="$br/uuid-%{V_uuid}" \
michael@428	1296	--with-lua="internal" \
michael@428	1297	--with-db="internal" \
michael@428	1298	--without-db-rpc \
michael@428	1299	--without-db-largefile \
michael@428	1300	--with-db-tools-integrated \
michael@428	1301	--with-db-mutex="UNIX/fcntl" \
michael@428	1302	--without-file \
michael@428	1303	--without-neon \
michael@428	1304	--without-pthreads \
michael@428	1305	--without-libelf \
michael@428	1306	--without-selinux \
michael@428	1307	--without-perl \
michael@13	1308	--without-python \
michael@13	1309	--without-apidocs \
michael@428	1310	--disable-build-warnings \
michael@428	1311	--disable-build-extlibdep \
michael@428	1312	--disable-build-intlibdep \
michael@428	1313	--disable-build-lafiles \
michael@13	1314	--disable-shared \
michael@13	1315	--disable-rpath \
michael@13	1316	--disable-nls
michael@13	1317
michael@428	1318	# build program
michael@13	1319	${l_make}
michael@13	1320	) || exit $?
michael@13	1321
michael@13	1322	# display verbosity header
michael@444	1323	set +x; VERBOSE "BUILD: Build OpenPKG Frontend (Setuid Wrapper)"; set -x
michael@13	1324
michael@13	1325	# build "openpkg" executable
michael@428	1326	${l_make} -f `SOURCE openpkg.mk` \
michael@13	1327	CC="${l_cc}" \
michael@13	1328	OPENPKG_PREFIX="%{l_prefix}" \
michael@13	1329	OPENPKG_SUSR="%{l_susr}" \
michael@428	1330	OPENPKG_MUSR="%{l_musr}" \
michael@428	1331	OPENPKG_DOT_C="`SOURCE openpkg.c`"
michael@428	1332
michael@428	1333	# display verbosity header
michael@428	1334	set +x; VERBOSE "BUILD: Build OpenPKG Mutual Exclusion (MutEx) Utility"; set -x
michael@428	1335
michael@428	1336	# build "mutex" executable
michael@428	1337	${l_make} -f `SOURCE mutex.mk` \
michael@428	1338	CC="${l_cc}" \
michael@428	1339	CPPFLAGS="-Ipopt-%{V_popt}" \
michael@472	1340	LDFLAGS="-Lpopt-%{V_popt} -Lpopt-%{V_popt}/.libs" \
michael@428	1341	MUTEX_DOT_C="`SOURCE mutex.c`"
michael@13	1342
michael@13	1343	%install
michael@13	1344	# skip in bootstrap phase 2 (see openpkg.boot)
michael@13	1345	[ ".$OPENPKG_BOOT" = .1 ] && exit 0
michael@13	1346
michael@13	1347	# switch into a temporary build area
michael@13	1348	cd openpkg-%{version}
michael@13	1349	. ./.buildenv
michael@13	1350
michael@13	1351	# display verbosity header
michael@13	1352	set +x; VERBOSE "INSTALL: Create Installation Filesystem Hierarchy"; set -x
michael@13	1353
michael@13	1354	# create installation hierarchy
michael@13	1355	rm -rf $RPM_BUILD_ROOT
michael@13	1356	sh $shtool mkdir -f -p -m 755 $RPM_BUILD_ROOT%{l_prefix}
michael@13	1357	for dir in bin etc include info lib libexec man sbin share var cgi pub local; do
michael@13	1358	test -d $RPM_BUILD_ROOT%{l_prefix}/$dir || \
michael@13	1359	mkdir $RPM_BUILD_ROOT%{l_prefix}/$dir
michael@13	1360	done
michael@13	1361	for i in 1 2 3 4 5 6 7 8 9; do
michael@13	1362	test -d $RPM_BUILD_ROOT%{l_prefix}/man/man$i || \
michael@13	1363	mkdir $RPM_BUILD_ROOT%{l_prefix}/man/man$i
michael@13	1364	test -d $RPM_BUILD_ROOT%{l_prefix}/man/cat$i || \
michael@13	1365	mkdir $RPM_BUILD_ROOT%{l_prefix}/man/cat$i
michael@13	1366	done
michael@13	1367	for dir in PKG bin etc include info lib man sbin; do
michael@13	1368	test -d $RPM_BUILD_ROOT%{l_prefix}/local/$dir || \
michael@13	1369	mkdir $RPM_BUILD_ROOT%{l_prefix}/local/$dir
michael@13	1370	done
michael@13	1371	for i in 1 2 3 4 5 6 7 8 9; do
michael@13	1372	test -d $RPM_BUILD_ROOT%{l_prefix}/local/man/man$i || \
michael@13	1373	mkdir $RPM_BUILD_ROOT%{l_prefix}/local/man/man$i
michael@13	1374	test -d $RPM_BUILD_ROOT%{l_prefix}/local/man/cat$i || \
michael@13	1375	mkdir $RPM_BUILD_ROOT%{l_prefix}/local/man/cat$i
michael@13	1376	done
michael@13	1377	test -d $RPM_BUILD_ROOT%{l_prefix}/RPM || \
michael@13	1378	mkdir $RPM_BUILD_ROOT%{l_prefix}/RPM
michael@428	1379	for dir in SRC PKG DB TR TMP; do
michael@13	1380	test -d $RPM_BUILD_ROOT%{l_prefix}/RPM/$dir || \
michael@13	1381	mkdir $RPM_BUILD_ROOT%{l_prefix}/RPM/$dir
michael@13	1382	done
michael@13	1383	mkdir $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg
michael@13	1384
michael@13	1385	# display verbosity header
michael@13	1386	set +x; VERBOSE "INSTALL: Installation of RPM"; set -x
michael@13	1387
michael@13	1388	# install RPM into installation hierarchy
michael@428	1389	( cd rpm-%{V_rpm_major}.%{V_rpm_minor}
michael@428	1390	${l_make} install DESTDIR="$RPM_BUILD_ROOT"
michael@428	1391	cp lua/rpmlua $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/lua
michael@428	1392	chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/lua
michael@13	1393	) || exit $?
michael@13	1394
michael@444	1395	# postadjust RPM installation
michael@428	1396	mv $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/macros \
michael@428	1397	$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmmacros
michael@428	1398
michael@13	1399	# display verbosity header
michael@13	1400	set +x; VERBOSE "INSTALL: Install Additional Files"; set -x
michael@13	1401
michael@13	1402	# add additional development files
michael@428	1403	cp rpm-%{V_rpm_major}.%{V_rpm_minor}/rpmio/glob.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
michael@428	1404	cp zlib-%{V_zlib}/zlib.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
michael@428	1405	cp zlib-%{V_zlib}/zconf.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
michael@13	1406	cp zlib-%{V_zlib}/libz.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmz.a
michael@428	1407	cp bzip2-%{V_bzip2}/bzlib.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
michael@13	1408	cp bzip2-%{V_bzip2}/libbz2.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmbz2.a
michael@428	1409	cp beecrypt-%{V_beecrypt}/include/beecrypt/beecrypt.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
michael@13	1410	cp beecrypt-%{V_beecrypt}/libbeecrypt.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmbeecrypt.a
michael@428	1411	cp popt-%{V_popt}/popt.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
michael@428	1412	cp popt-%{V_popt}/.libs/libpopt.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmpopt.a
michael@428	1413	cp sqlite-%{V_sqlite}/sqlite3.h $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm/
michael@428	1414	cp sqlite-%{V_sqlite}/.libs/libsqlite3.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmsqlite3.a
michael@13	1415
michael@13	1416	# display verbosity header
michael@444	1417	set +x; VERBOSE "INSTALL: Postadjust Installation"; set -x
michael@13	1418
michael@13	1419	# move C API into custom locations
michael@13	1420	mv $RPM_BUILD_ROOT%{l_prefix}/lib/librpm* \
michael@13	1421	$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/
michael@428	1422	mv $RPM_BUILD_ROOT%{l_prefix}/lib/pkgconfig/rpm.pc \
michael@428	1423	$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/
michael@428	1424	# FIXME: does the rpm.pc really work this way?
michael@13	1425
michael@13	1426	# move rpm tool to custom location
michael@13	1427	mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpm \
michael@13	1428	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
michael@13	1429	mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpm.8 \
michael@13	1430	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm.8
michael@428	1431	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm >/dev/null 2>&1 || true
michael@13	1432
michael@13	1433	# move rpm2cpio tool to custom location
michael@13	1434	mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpm2cpio \
michael@13	1435	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm2cpio
michael@13	1436	mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpm2cpio.8 \
michael@13	1437	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm2cpio.8
michael@428	1438	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm2cpio >/dev/null 2>&1 || true
michael@13	1439
michael@428	1440	# move rpmconstant tool to custom location
michael@428	1441	mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpmconstant \
michael@428	1442	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmconstant
michael@428	1443	mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmconstant.8 \
michael@428	1444	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmconstant.8
michael@428	1445	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmconstant >/dev/null 2>&1 || true
michael@428	1446
michael@428	1447	# move rpmcache tool to custom location
michael@428	1448	mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpmcache \
michael@428	1449	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmcache
michael@428	1450	mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmcache.8 \
michael@428	1451	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmcache.8
michael@428	1452	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmcache >/dev/null 2>&1 || true
michael@428	1453
michael@428	1454	# move rpmgrep tool to custom location
michael@428	1455	mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpmgrep \
michael@428	1456	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmgrep
michael@428	1457	mv $RPM_BUILD_ROOT%{l_prefix}/man/man1/rpmgrep.1 \
michael@428	1458	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmgrep.1
michael@428	1459	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmgrep >/dev/null 2>&1 || true
michael@428	1460
michael@428	1461	# move manual pages to custom location
michael@428	1462	mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmdeps.8 \
michael@428	1463	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmdeps.8
michael@428	1464	mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmgraph.8 \
michael@428	1465	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmgraph.8
michael@13	1466	mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmbuild.8 \
michael@13	1467	$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmbuild.8
michael@13	1468
michael@13	1469	# display verbosity header
michael@13	1470	set +x; VERBOSE "INSTALL: Stripping Down Installation"; set -x
michael@13	1471
michael@13	1472	# strip RPM installation
michael@13	1473	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/bin/* \
michael@13	1474	$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/* >/dev/null 2>&1 || true
michael@428	1475	for file in rpmbuild gendiff; do
michael@13	1476	rm -f $RPM_BUILD_ROOT%{l_prefix}/bin/$file >/dev/null 2>&1 || true
michael@13	1477	done
michael@428	1478	for dir in RPMS SRPMS SPEC SOURCES BUILD; do
michael@428	1479	rm -rf $RPM_BUILD_ROOT%{l_prefix}/RPM/$dir >/dev/null 2>&1 || true
michael@428	1480	done
michael@13	1481	rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man1/* >/dev/null 2>&1 || true
michael@13	1482	rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man3/* >/dev/null 2>&1 || true
michael@13	1483	rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/lib*.la >/dev/null 2>&1 || true
michael@428	1484	rm -rf $RPM_BUILD_ROOT%{l_prefix}/lib/pkgconfig >/dev/null 2>&1 || true
michael@13	1485	for file in \
michael@428	1486	brp-compress brp-python-bytecompile brp-java-gcjcompile brp-strip brp-strip-comment-note \
michael@428	1487	brp-nobuildrootpath brp-strip-shared brp-strip-static-archive brp-sparc64-linux check-files \
michael@428	1488	cross-build executabledeps.sh find-debuginfo.sh find-lang.sh find-prov.pl find-req.pl \
michael@428	1489	find-provides.perl find-requires.perl getpo.sh http.req javadeps.sh libtooldeps.sh mono-find-provides \
michael@428	1490	mono-find-requires osgideps.pl pkgconfigdeps.sh perldeps.pl perl.prov perl.req pythondeps.sh \
michael@428	1491	php.prov php.req rpmdb_loadcvt rpm.daily rpm.log rpm.xinetd symclash.py symclash.sh tgpg u_pkg.sh \
michael@428	1492	vpkg-provides.sh vpkg-provides2.sh install-sh mkinstalldirs; do
michael@428	1493	rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$file >/dev/null 2>&1 || true
michael@428	1494	done
michael@428	1495	for file in \
michael@428	1496	db_archive db_checkpoint db_deadlock db_dump db_hotbackup db_load \
michael@428	1497	db_printlog db_recover db_stat db_upgrade db_verify; do
michael@13	1498	rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$file >/dev/null 2>&1 || true
michael@13	1499	done
michael@13	1500
michael@13	1501	# display verbosity header
michael@13	1502	set +x; VERBOSE "INSTALL: Install Additional Tools"; set -x
michael@13	1503
michael@13	1504	# install lsync tool
michael@13	1505	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1506	<`SOURCE lsync` \
michael@13	1507	>$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync
michael@13	1508	chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync
michael@13	1509	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1510	<`SOURCE dot.lsyncrc` \
michael@13	1511	>$RPM_BUILD_ROOT%{l_prefix}/local/.lsyncrc
michael@13	1512	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1513	<`SOURCE lsync.8` \
michael@13	1514	>$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync.8
michael@13	1515
michael@13	1516	# install rpm-config tool
michael@13	1517	( l_prefix="%{l_prefix}"
michael@13	1518	l_cc="%{l_cc}"
michael@13	1519	l_cflags=""
michael@13	1520	l_cppflags="-DOPENPKG -I${l_prefix}/include/openpkg/rpm -I${l_prefix}/include/openpkg"
michael@13	1521	l_ldflags="-L${l_prefix}/lib/openpkg"
michael@428	1522	l_libs="-lrpmbuild -lrpm -lrpmio -lrpmdb -lrpmmisc -lrpmsqlite3 -lrpmpopt -lrpmbeecrypt -lrpmbz2 -lrpmz"
michael@13	1523	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1524	-e "s:@l_cc@:$l_cc:g" \
michael@13	1525	-e "s:@l_cflags@:$l_cflags:g" \
michael@13	1526	-e "s:@l_cppflags@:$l_cppflags:g" \
michael@13	1527	-e "s:@l_ldflags@:$l_ldflags:g" \
michael@13	1528	-e "s:@l_libs@:$l_libs:g" \
michael@428	1529	-e "s:@l_version@:%{V_rpm_major}.%{V_rpm_minor}:g" \
michael@13	1530	<`SOURCE rpm-config.sh` \
michael@13	1531	>$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config
michael@13	1532	) || exit $?
michael@13	1533	chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config
michael@428	1534	sed -e "s:RPM_VERSION:%{V_rpm_major}.%{V_rpm_minor}:g" \
michael@13	1535	<`SOURCE rpm-config.8` \
michael@13	1536	>$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config.8
michael@13	1537
michael@13	1538	# install OpenPKG registry commands
michael@428	1539	mv $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm \
michael@428	1540	$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpm
michael@428	1541	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@428	1542	`SOURCE rpm.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
michael@428	1543	chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
michael@428	1544	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@428	1545	`SOURCE register.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register
michael@428	1546	chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register
michael@428	1547	cp `SOURCE register.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register.8
michael@13	1548
michael@428	1549	# allow GNU shtool to be called as "openpkg shtool" from external, too.
michael@428	1550	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@428	1551	`SOURCE shtool.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/shtool.sh
michael@428	1552	chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/shtool.sh
michael@428	1553
michael@428	1554	# install OpenPKG tool chain command subset
michael@428	1555	cp `SOURCE curl.sh` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/curl.sh
michael@428	1556	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/curl.sh
michael@428	1557	cp `SOURCE build.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.pl
michael@428	1558	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.pl
michael@428	1559	cp `SOURCE build.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.8
michael@428	1560	cp `SOURCE index.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/index.pl
michael@428	1561	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/index.pl
michael@428	1562	cp `SOURCE index.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/index.8
michael@428	1563	cp `SOURCE search.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/search.pl
michael@428	1564	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/search.pl
michael@428	1565	cp `SOURCE search.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/search.8
michael@428	1566	cp `SOURCE mirror.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/mirror.pl
michael@428	1567	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/mirror.pl
michael@428	1568	cp `SOURCE mirror.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/mirror.8
michael@428	1569	cp `SOURCE makeproxy.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/makeproxy.pl
michael@428	1570	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/makeproxy.pl
michael@428	1571	cp `SOURCE makeproxy.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/makeproxy.8
michael@428	1572	cp `SOURCE lint-fsl.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-fsl.pl
michael@428	1573	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-fsl.pl
michael@428	1574	cp `SOURCE lint-rc.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-rc.pl
michael@428	1575	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-rc.pl
michael@428	1576	cp `SOURCE lint-rpm.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-rpm.pl
michael@428	1577	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-rpm.pl
michael@428	1578	cp `SOURCE lint-spec.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-spec.pl
michael@428	1579	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lint-spec.pl
michael@428	1580	cp `SOURCE dev.pl` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/dev.pl
michael@428	1581	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/dev.pl
michael@428	1582	cp `SOURCE dev.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/dev.8
michael@428	1583	cp `SOURCE sea.sh` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/sea.sh
michael@428	1584	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/sea.sh
michael@428	1585	cp `SOURCE sea.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/sea.8
michael@428	1586	cp `SOURCE stack.sh` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/stack.sh
michael@428	1587	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/stack.sh
michael@428	1588	cp `SOURCE stack.8` $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/stack.8
michael@13	1589
michael@13	1590	# install RPM extension
michael@13	1591	( cd perl-%{V_perl}
michael@13	1592	cp miniperl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/miniperl
michael@13	1593	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/miniperl
michael@13	1594	) || exit $?
michael@13	1595	( cd openssl-%{V_openssl}
michael@13	1596	cp apps/openssl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openssl
michael@13	1597	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openssl
michael@13	1598	) || exit $?
michael@13	1599	( cd curl-%{V_curl}
michael@428	1600	cp curl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/curl
michael@13	1601	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/curl
michael@13	1602	) || exit $?
michael@13	1603	( cd bzip2-%{V_bzip2}
michael@13	1604	cp bzip2 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bzip2
michael@13	1605	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bzip2
michael@13	1606	) || exit $?
michael@13	1607	( cd gzip-%{V_gzip}
michael@13	1608	cp gzip $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/gzip
michael@13	1609	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/gzip
michael@13	1610	) || exit $?
michael@428	1611	( cd xz-%{V_xz}
michael@428	1612	cp src/xz/xz $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/xz
michael@428	1613	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/xz
michael@428	1614	) || exit $?
michael@13	1615	( cd patch-%{V_patch}
michael@13	1616	cp patch $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/patch
michael@13	1617	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/patch
michael@13	1618	) || exit $?
michael@13	1619	( cd tar-%{V_tar}
michael@13	1620	cp tar $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/tar
michael@13	1621	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/tar
michael@13	1622	) || exit $?
michael@13	1623	( cd bash-%{V_bash}
michael@13	1624	cp bash $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bash
michael@13	1625	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bash
michael@13	1626	) || exit $?
michael@13	1627	( cd uuid-%{V_uuid}
michael@13	1628	cp uuid $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/uuid
michael@13	1629	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/uuid
michael@13	1630	) || exit $?
michael@428	1631	( cd sqlite-%{V_sqlite}
michael@428	1632	cp sqlite3 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/sqlite3
michael@428	1633	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/sqlite3
michael@428	1634	) || exit $?
michael@428	1635	( cd libarchive-%{V_libarchive}
michael@428	1636	cp bsdcpio $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bsdcpio
michael@428	1637	cp bsdtar $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bsdtar
michael@428	1638	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bsdcpio
michael@428	1639	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bsdtar
michael@428	1640	) || exit $?
michael@428	1641	( cd diffutils-%{V_diffutils}
michael@428	1642	${l_strip} diff diff3 sdiff cmp
michael@428	1643	cp diff diff3 sdiff cmp $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/
michael@428	1644	) || exit $?
michael@428	1645	( cd svs-%{V_svs}
michael@428	1646	sed -e "s;/bin/sh;%{l_prefix}/lib/openpkg/bash;" \
michael@428	1647	-e "s;^\( *\)\(diff \);\1%{l_prefix}/lib/openpkg/\2;" \
michael@428	1648	<svs.sh >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/svs
michael@428	1649	chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/svs
michael@428	1650	cp svs.1 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/svs.1
michael@428	1651	) || exit $?
michael@13	1652	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@13	1653	-e "s;@l_musr@;%{l_musr};g" \
michael@13	1654	-e "s;@l_mgrp@;%{l_mgrp};g" \
michael@13	1655	<`SOURCE uuid.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid
michael@13	1656	chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid
michael@13	1657	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@13	1658	<`SOURCE uuid.8` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid.8
michael@13	1659	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@13	1660	<`SOURCE release.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release
michael@13	1661	chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release
michael@13	1662	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@13	1663	<`SOURCE release.8` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release.8
michael@13	1664	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@13	1665	-e "s;@l_musr@;%{l_musr};g" \
michael@13	1666	-e "s;@l_mgrp@;%{l_mgrp};g" \
michael@13	1667	<`SOURCE rpmdb` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmdb
michael@13	1668	chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmdb
michael@13	1669	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1670	<`SOURCE rpmtool` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmtool
michael@13	1671	chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmtool
michael@428	1672	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@428	1673	-e "s;@l_musr@;%{l_musr};g" \
michael@428	1674	-e "s;@l_mgrp@;%{l_mgrp};g" \
michael@428	1675	<`SOURCE license.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/license
michael@428	1676	chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/license
michael@428	1677	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@428	1678	<`SOURCE license.8` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/license.8
michael@13	1679
michael@13	1680	# install OpenPKG tool chain execution frontend and execution wrapper
michael@428	1681	cp openpkg $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
michael@13	1682	${l_strip} $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
michael@13	1683	chmod 4775 $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
michael@13	1684	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@13	1685	<`SOURCE openpkg.sh` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openpkg
michael@13	1686	chmod 755 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openpkg
michael@13	1687	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1688	<`SOURCE openpkg.1` \
michael@13	1689	>$RPM_BUILD_ROOT%{l_prefix}/man/man1/openpkg.1
michael@13	1690
michael@13	1691	# install more OpenPKG tool chain commands
michael@13	1692	sed -e "s;@l_prefix@;%{l_prefix};g" \
michael@13	1693	<`SOURCE man.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/man
michael@13	1694	chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/man
michael@13	1695
michael@428	1696	# install OpenPKG mutex utility
michael@428	1697	cp mutex $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/mutex
michael@428	1698
michael@13	1699	# install an own copy of shtool
michael@13	1700	cp $shtool $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/shtool
michael@13	1701	chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/shtool
michael@13	1702
michael@13	1703	# display verbosity header
michael@13	1704	set +x; VERBOSE "INSTALL: Install Configuration Files"; set -x
michael@13	1705
michael@13	1706	# install a few README files
michael@13	1707	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1708	<`SOURCE root.README` \
michael@13	1709	>$RPM_BUILD_ROOT%{l_prefix}/README
michael@13	1710	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1711	<`SOURCE local.README` \
michael@13	1712	>$RPM_BUILD_ROOT%{l_prefix}/local/README
michael@13	1713
michael@13	1714	# install Bash environment
michael@13	1715	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1716	<`SOURCE dot.bashrc` \
michael@13	1717	>$RPM_BUILD_ROOT%{l_prefix}/.bashrc
michael@13	1718	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1719	<`SOURCE dot.bash_login` \
michael@13	1720	>$RPM_BUILD_ROOT%{l_prefix}/.bash_login
michael@13	1721
michael@444	1722	# install Runcommand files
michael@13	1723	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1724	-e "s:@l_susr@:%{l_susr}:g" \
michael@13	1725	-e "s:@l_musr@:%{l_musr}:g" \
michael@13	1726	<`SOURCE rc` \
michael@13	1727	>$RPM_BUILD_ROOT%{l_prefix}/etc/rc
michael@13	1728	chmod 755 $RPM_BUILD_ROOT%{l_prefix}/etc/rc
michael@13	1729	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1730	<`SOURCE rc.conf` \
michael@13	1731	>$RPM_BUILD_ROOT%{l_prefix}/etc/rc.conf
michael@13	1732	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.conf
michael@13	1733	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1734	<`SOURCE rc.func` \
michael@13	1735	>$RPM_BUILD_ROOT%{l_prefix}/etc/rc.func
michael@13	1736	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.func
michael@13	1737	mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
michael@13	1738	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1739	-e "s:@l_musr@:%{l_musr}:g" \
michael@13	1740	<`SOURCE rc.openpkg` \
michael@13	1741	>$RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/rc.openpkg
michael@13	1742	chmod 755 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/rc.openpkg
michael@13	1743	( echo "#!/bin/sh"
michael@13	1744	echo "exec %{l_prefix}/etc/rc \${1+\"\$@\"}"
michael@13	1745	) >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc
michael@13	1746	chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc
michael@13	1747	ln $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc \
michael@13	1748	$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rc
michael@13	1749	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1750	<`SOURCE rc.8` \
michael@13	1751	>$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc.8
michael@13	1752
michael@13	1753	# create configuration directory
michael@13	1754	test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg || \
michael@13	1755	mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg
michael@13	1756
michael@13	1757	# install platform identification file
michael@13	1758	sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-any-%<sp>" \
michael@13	1759	>$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/platform
michael@13	1760	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/platform
michael@13	1761
michael@13	1762	# install UUID configuration file (ghost)
michael@13	1763	touch $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/uuid
michael@13	1764	chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/uuid
michael@13	1765
michael@13	1766	# install registry configuration files (ghost)
michael@13	1767	touch \
michael@13	1768	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.conf \
michael@13	1769	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.prep \
michael@13	1770	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.tran \
michael@13	1771	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.util
michael@13	1772	chmod 644 \
michael@13	1773	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.conf \
michael@13	1774	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.prep \
michael@13	1775	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.tran \
michael@13	1776	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.util
michael@13	1777
michael@13	1778	# install default managers configuration file
michael@13	1779	( echo "##"
michael@13	1780	echo "## managers -- OpenPKG Instance Managers"
michael@13	1781	echo "##"
michael@13	1782	echo ""
michael@13	1783	echo "%{l_susr}"
michael@13	1784	echo "%{l_musr}"
michael@13	1785	echo ""
michael@13	1786	) >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/managers
michael@13	1787
michael@428	1788	# install default release information file
michael@428	1789	release_tag=""
michael@428	1790	release_url=""
michael@428	1791	l_stack=""; [ ".%{?l_stack:set}" = .set ] && l_stack="%{l_stack}"
michael@428	1792	case "$l_stack" in
michael@428	1793	http: | https: | ftp: | file: )
michael@428	1794	release_url="$l_stack"
michael@428	1795	;;
michael@428	1796	[a-zA-Z]* )
michael@428	1797	release_tag="$l_stack"
michael@428	1798	;;
michael@428	1799	esac
michael@428	1800	( echo "##"
michael@428	1801	echo "## release -- OpenPKG Release Information"
michael@428	1802	echo "##"
michael@428	1803	echo ""
michael@428	1804	echo "TAG=$release_tag"
michael@428	1805	echo "URL=$release_url"
michael@428	1806	echo ""
michael@428	1807	) >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/release
michael@428	1808
michael@13	1809	# install overriding RPM configuration files
michael@13	1810	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1811	<`SOURCE rpmpopt` \
michael@428	1812	>$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmpopt
michael@13	1813	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@13	1814	-e "s:@l_prefix_static@:%{l_prefix}:g" \
michael@13	1815	-e "s;@l_build_path@;$l_build_path;g" \
michael@13	1816	-e "s;@l_build_ldlp@;$l_build_ldlp;g" \
michael@13	1817	-e "s;@l_build_ulim@;$l_build_ulim;g" \
michael@428	1818	-e "s;@l_unprivileged@;$l_unprivileged;g" \
michael@13	1819	-e "s:@TAG@:$tag:g" \
michael@13	1820	-e "s:@SUSR@:$susr:g" \
michael@13	1821	-e "s:@SGRP@:$sgrp:g" \
michael@13	1822	-e "s:@MUSR@:$musr:g" \
michael@13	1823	-e "s:@MGRP@:$mgrp:g" \
michael@13	1824	-e "s:@RUSR@:$rusr:g" \
michael@13	1825	-e "s:@RGRP@:$rgrp:g" \
michael@13	1826	-e "s:@NUSR@:$nusr:g" \
michael@13	1827	-e "s:@NGRP@:$ngrp:g" \
michael@13	1828	<`SOURCE rpmmacros` \
michael@13	1829	>$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmmacros
michael@428	1830	sed -e "s:@l_prefix@:%{l_prefix}:g" \
michael@428	1831	<`SOURCE rpmlua` \
michael@428	1832	>$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmlua
michael@13	1833	cp `SOURCE openpkg.org.pgp` \
michael@13	1834	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.org.pgp
michael@13	1835	cp `SOURCE openpkg.com.pgp` \
michael@13	1836	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.com.pgp
michael@13	1837	cp `SOURCE openpkg.net.pgp` \
michael@13	1838	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.net.pgp
michael@13	1839
michael@428	1840	# install license data
michael@428	1841	test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d || \
michael@428	1842	mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d
michael@428	1843	cp `SOURCE license-BOOT.txt` \
michael@428	1844	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/BOOT
michael@428	1845	cp `SOURCE license-COMMUNITY.txt` \
michael@428	1846	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/COMMUNITY
michael@428	1847	cp `SOURCE license-EVAL.txt` \
michael@428	1848	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/EVAL
michael@428	1849	cp `SOURCE license-EXAMPLE.txt` \
michael@428	1850	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/EXAMPLE
michael@428	1851	cp `SOURCE license-PROMO.txt` \
michael@428	1852	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/PROMO
michael@428	1853	cp `SOURCE license-RECOVERY.txt` \
michael@428	1854	$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license.d/RECOVERY
michael@428	1855	cp `SOURCE license.lua` \
michael@428	1856	$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/license.lua
michael@428	1857	touch $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/license
michael@428	1858
michael@428	1859	# provide directories for easy overriding of RPM configuration files
michael@428	1860	test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmmacros.d || \
michael@428	1861	mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmmacros.d
michael@428	1862	test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmpopt.d || \
michael@428	1863	mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmpopt.d
michael@428	1864	test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmlua.d || \
michael@428	1865	mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmlua.d
michael@428	1866
michael@13	1867	# display verbosity header
michael@13	1868	set +x; VERBOSE "INSTALL: Done. Thank you for flying OpenPKG..."; set -x
michael@13	1869
michael@13	1870	%files
michael@13	1871	%defattr(-,%{?l_musr}%{!?l_musr:%{l_fsusr}},%{?l_mgrp}%{!?l_mgrp:%{l_fsgrp}})
michael@13	1872	%{l_prefix}/README
michael@13	1873	%config(noreplace) %{l_prefix}/.bashrc
michael@13	1874	%config(noreplace) %{l_prefix}/.bash_login
michael@13	1875	%dir %{l_prefix}/RPM
michael@13	1876	%dir %{l_prefix}/RPM/SRC
michael@13	1877	%dir %{l_prefix}/RPM/PKG
michael@428	1878	%dir %{l_prefix}/RPM/TR
michael@13	1879	%dir %{l_prefix}/RPM/DB
michael@13	1880	%dir %{l_prefix}/RPM/TMP
michael@13	1881	%dir %{l_prefix}/cgi
michael@13	1882	%dir %{l_prefix}/bin
michael@13	1883	%attr(4755,%{l_susr},%{l_mgrp}) %{l_prefix}/bin/openpkg
michael@13	1884	%dir %{l_prefix}/etc
michael@13	1885	%{l_prefix}/etc/rc
michael@13	1886	%config(noreplace) %{l_prefix}/etc/rc.conf
michael@13	1887	%{l_prefix}/etc/rc.func
michael@13	1888	%dir %{l_prefix}/etc/rc.d
michael@13	1889	%{l_prefix}/etc/rc.d/rc.openpkg
michael@13	1890	%dir %{l_prefix}/etc/openpkg
michael@428	1891	%ghost %{l_prefix}/etc/openpkg/license
michael@428	1892	%dir %{l_prefix}/etc/openpkg/license.d
michael@428	1893	%{l_prefix}/etc/openpkg/license.d/BOOT
michael@428	1894	%{l_prefix}/etc/openpkg/license.d/COMMUNITY
michael@428	1895	%{l_prefix}/etc/openpkg/license.d/EVAL
michael@428	1896	%{l_prefix}/etc/openpkg/license.d/EXAMPLE
michael@428	1897	%{l_prefix}/etc/openpkg/license.d/PROMO
michael@428	1898	%{l_prefix}/etc/openpkg/license.d/RECOVERY
michael@13	1899	%ghost %{l_prefix}/etc/openpkg/uuid
michael@428	1900	%config %{l_prefix}/etc/openpkg/release
michael@13	1901	%config %{l_prefix}/etc/openpkg/platform
michael@13	1902	%config %{l_prefix}/etc/openpkg/rpmmacros
michael@428	1903	%config %{l_prefix}/etc/openpkg/rpmpopt
michael@428	1904	%config %{l_prefix}/etc/openpkg/rpmlua
michael@428	1905	%dir %{l_prefix}/etc/openpkg/rpmmacros.d
michael@428	1906	%dir %{l_prefix}/etc/openpkg/rpmpopt.d
michael@428	1907	%dir %{l_prefix}/etc/openpkg/rpmlua.d
michael@13	1908	%ghost %{l_prefix}/etc/openpkg/register.conf
michael@13	1909	%ghost %{l_prefix}/etc/openpkg/register.prep
michael@13	1910	%ghost %{l_prefix}/etc/openpkg/register.tran
michael@13	1911	%ghost %{l_prefix}/etc/openpkg/register.util
michael@13	1912	%config %attr(664,%{l_musr},%{l_mgrp}) %{l_prefix}/etc/openpkg/managers
michael@13	1913	%{l_prefix}/etc/openpkg/openpkg.org.pgp
michael@13	1914	%{l_prefix}/etc/openpkg/openpkg.com.pgp
michael@13	1915	%{l_prefix}/etc/openpkg/openpkg.net.pgp
michael@13	1916	%dir %{l_prefix}/include
michael@13	1917	%dir %{l_prefix}/include/openpkg
michael@13	1918	%dir %{l_prefix}/include/openpkg/rpm
michael@13	1919	%{l_prefix}/include/openpkg/rpm/argv.h
michael@13	1920	%{l_prefix}/include/openpkg/rpm/beecrypt.h
michael@13	1921	%{l_prefix}/include/openpkg/rpm/bzlib.h
michael@13	1922	%{l_prefix}/include/openpkg/rpm/db.h
michael@428	1923	%{l_prefix}/include/openpkg/rpm/envvar.h
michael@428	1924	%{l_prefix}/include/openpkg/rpm/fs.h
michael@13	1925	%{l_prefix}/include/openpkg/rpm/fts.h
michael@13	1926	%{l_prefix}/include/openpkg/rpm/glob.h
michael@428	1927	%{l_prefix}/include/openpkg/rpm/mire.h
michael@13	1928	%{l_prefix}/include/openpkg/rpm/misc.h
michael@428	1929	%{l_prefix}/include/openpkg/rpm/pkgio.h
michael@13	1930	%{l_prefix}/include/openpkg/rpm/popt.h
michael@428	1931	%{l_prefix}/include/openpkg/rpm/rpm4compat.h
michael@13	1932	%{l_prefix}/include/openpkg/rpm/rpmal.h
michael@428	1933	%{l_prefix}/include/openpkg/rpm/rpmbc.h
michael@13	1934	%{l_prefix}/include/openpkg/rpm/rpmbuild.h
michael@428	1935	%{l_prefix}/include/openpkg/rpm/rpmcb.h
michael@13	1936	%{l_prefix}/include/openpkg/rpm/rpmcli.h
michael@428	1937	%{l_prefix}/include/openpkg/rpm/rpmconstant.h
michael@428	1938	%{l_prefix}/include/openpkg/rpm/rpmdav.h
michael@13	1939	%{l_prefix}/include/openpkg/rpm/rpmdb.h
michael@13	1940	%{l_prefix}/include/openpkg/rpm/rpmds.h
michael@428	1941	%{l_prefix}/include/openpkg/rpm/rpmevr.h
michael@13	1942	%{l_prefix}/include/openpkg/rpm/rpmfc.h
michael@13	1943	%{l_prefix}/include/openpkg/rpm/rpmfi.h
michael@428	1944	%{l_prefix}/include/openpkg/rpm/rpmgc.h
michael@428	1945	%{l_prefix}/include/openpkg/rpm/rpmgi.h
michael@13	1946	%{l_prefix}/include/openpkg/rpm/rpmhash.h
michael@428	1947	%{l_prefix}/include/openpkg/rpm/rpmio-stub.h
michael@13	1948	%{l_prefix}/include/openpkg/rpm/rpmio.h
michael@428	1949	%{l_prefix}/include/openpkg/rpm/rpmiotypes.h
michael@428	1950	%{l_prefix}/include/openpkg/rpm/rpmku.h
michael@13	1951	%{l_prefix}/include/openpkg/rpm/rpmlib.h
michael@13	1952	%{l_prefix}/include/openpkg/rpm/rpmlog.h
michael@13	1953	%{l_prefix}/include/openpkg/rpm/rpmmacro.h
michael@428	1954	%{l_prefix}/include/openpkg/rpm/rpmmg.h
michael@428	1955	%{l_prefix}/include/openpkg/rpm/rpmns.h
michael@428	1956	%{l_prefix}/include/openpkg/rpm/rpmnss.h
michael@13	1957	%{l_prefix}/include/openpkg/rpm/rpmpgp.h
michael@13	1958	%{l_prefix}/include/openpkg/rpm/rpmps.h
michael@13	1959	%{l_prefix}/include/openpkg/rpm/rpmspec.h
michael@428	1960	%{l_prefix}/include/openpkg/rpm/rpmsq.h
michael@428	1961	%{l_prefix}/include/openpkg/rpm/rpmssl.h
michael@13	1962	%{l_prefix}/include/openpkg/rpm/rpmsw.h
michael@428	1963	%{l_prefix}/include/openpkg/rpm/rpmsx.h
michael@428	1964	%{l_prefix}/include/openpkg/rpm/rpmtag.h
michael@13	1965	%{l_prefix}/include/openpkg/rpm/rpmte.h
michael@13	1966	%{l_prefix}/include/openpkg/rpm/rpmts.h
michael@13	1967	%{l_prefix}/include/openpkg/rpm/rpmurl.h
michael@428	1968	%{l_prefix}/include/openpkg/rpm/rpmuuid.h
michael@428	1969	%{l_prefix}/include/openpkg/rpm/rpmversion.h
michael@428	1970	%{l_prefix}/include/openpkg/rpm/rpmwf.h
michael@428	1971	%{l_prefix}/include/openpkg/rpm/rpmxar.h
michael@428	1972	%{l_prefix}/include/openpkg/rpm/rpmzlog.h
michael@428	1973	%{l_prefix}/include/openpkg/rpm/signature.h
michael@428	1974	%{l_prefix}/include/openpkg/rpm/sqlite3.h
michael@13	1975	%{l_prefix}/include/openpkg/rpm/ugid.h
michael@428	1976	%{l_prefix}/include/openpkg/rpm/yarn.h
michael@13	1977	%{l_prefix}/include/openpkg/rpm/zconf.h
michael@13	1978	%{l_prefix}/include/openpkg/rpm/zlib.h
michael@13	1979	%dir %{l_prefix}/info
michael@13	1980	%dir %{l_prefix}/lib
michael@13	1981	%dir %{l_prefix}/lib/openpkg
michael@13	1982	%{l_prefix}/lib/openpkg/bash
michael@428	1983	%{l_prefix}/lib/openpkg/bsdcpio
michael@428	1984	%{l_prefix}/lib/openpkg/bsdtar
michael@13	1985	%{l_prefix}/lib/openpkg/bzip2
michael@13	1986	%{l_prefix}/lib/openpkg/curl
michael@428	1987	%{l_prefix}/lib/openpkg/db_tool
michael@428	1988	%{l_prefix}/lib/openpkg/cmp
michael@428	1989	%{l_prefix}/lib/openpkg/diff
michael@428	1990	%{l_prefix}/lib/openpkg/diff3
michael@428	1991	%{l_prefix}/lib/openpkg/sdiff
michael@13	1992	%{l_prefix}/lib/openpkg/gzip
michael@13	1993	%{l_prefix}/lib/openpkg/librpm.a
michael@13	1994	%{l_prefix}/lib/openpkg/librpmbeecrypt.a
michael@13	1995	%{l_prefix}/lib/openpkg/librpmbuild.a
michael@13	1996	%{l_prefix}/lib/openpkg/librpmbz2.a
michael@13	1997	%{l_prefix}/lib/openpkg/librpmdb.a
michael@13	1998	%{l_prefix}/lib/openpkg/librpmio.a
michael@428	1999	%{l_prefix}/lib/openpkg/librpmmisc.a
michael@13	2000	%{l_prefix}/lib/openpkg/librpmpopt.a
michael@428	2001	%{l_prefix}/lib/openpkg/librpmsqlite3.a
michael@13	2002	%{l_prefix}/lib/openpkg/librpmz.a
michael@428	2003	%{l_prefix}/lib/openpkg/license.lua
michael@13	2004	%{l_prefix}/lib/openpkg/miniperl
michael@428	2005	%{l_prefix}/lib/openpkg/mutex
michael@13	2006	%{l_prefix}/lib/openpkg/openpkg
michael@13	2007	%{l_prefix}/lib/openpkg/openssl
michael@13	2008	%{l_prefix}/lib/openpkg/patch
michael@13	2009	%{l_prefix}/lib/openpkg/rc
michael@13	2010	%{l_prefix}/lib/openpkg/rpm
michael@428	2011	%{l_prefix}/lib/openpkg/rpm.pc
michael@13	2012	%{l_prefix}/lib/openpkg/rpmdb
michael@428	2013	%{l_prefix}/lib/openpkg/rpmdeps
michael@428	2014	%{l_prefix}/lib/openpkg/lua
michael@428	2015	%{l_prefix}/lib/openpkg/rpmmacros
michael@13	2016	%{l_prefix}/lib/openpkg/rpmpopt
michael@13	2017	%{l_prefix}/lib/openpkg/rpmtool
michael@13	2018	%{l_prefix}/lib/openpkg/shtool
michael@428	2019	%{l_prefix}/lib/openpkg/sqlite3
michael@13	2020	%{l_prefix}/lib/openpkg/tar
michael@13	2021	%{l_prefix}/lib/openpkg/uuid
michael@428	2022	%{l_prefix}/lib/openpkg/xz
michael@13	2023	%dir %{l_prefix}/libexec
michael@13	2024	%dir %{l_prefix}/libexec/openpkg
michael@13	2025	%{l_prefix}/libexec/openpkg/build.8
michael@13	2026	%{l_prefix}/libexec/openpkg/build.pl
michael@13	2027	%{l_prefix}/libexec/openpkg/curl.sh
michael@428	2028	%{l_prefix}/libexec/openpkg/dev.8
michael@428	2029	%{l_prefix}/libexec/openpkg/dev.pl
michael@428	2030	%{l_prefix}/libexec/openpkg/index.8
michael@428	2031	%{l_prefix}/libexec/openpkg/index.pl
michael@428	2032	%{l_prefix}/libexec/openpkg/license
michael@428	2033	%{l_prefix}/libexec/openpkg/license.8
michael@13	2034	%{l_prefix}/libexec/openpkg/lsync
michael@13	2035	%{l_prefix}/libexec/openpkg/lsync.8
michael@428	2036	%{l_prefix}/libexec/openpkg/lint-fsl.pl
michael@428	2037	%{l_prefix}/libexec/openpkg/lint-rc.pl
michael@428	2038	%{l_prefix}/libexec/openpkg/lint-rpm.pl
michael@428	2039	%{l_prefix}/libexec/openpkg/lint-spec.pl
michael@428	2040	%{l_prefix}/libexec/openpkg/makeproxy.8
michael@428	2041	%{l_prefix}/libexec/openpkg/makeproxy.pl
michael@13	2042	%{l_prefix}/libexec/openpkg/man
michael@428	2043	%{l_prefix}/libexec/openpkg/mirror.8
michael@428	2044	%{l_prefix}/libexec/openpkg/mirror.pl
michael@13	2045	%{l_prefix}/libexec/openpkg/rc
michael@13	2046	%{l_prefix}/libexec/openpkg/rc.8
michael@13	2047	%{l_prefix}/libexec/openpkg/register
michael@13	2048	%{l_prefix}/libexec/openpkg/register.8
michael@13	2049	%{l_prefix}/libexec/openpkg/release
michael@13	2050	%{l_prefix}/libexec/openpkg/release.8
michael@13	2051	%{l_prefix}/libexec/openpkg/rpm
michael@13	2052	%{l_prefix}/libexec/openpkg/rpm-config
michael@13	2053	%{l_prefix}/libexec/openpkg/rpm-config.8
michael@13	2054	%{l_prefix}/libexec/openpkg/rpm.8
michael@428	2055	%{l_prefix}/libexec/openpkg/rpmconstant
michael@428	2056	%{l_prefix}/libexec/openpkg/rpmconstant.8
michael@13	2057	%{l_prefix}/libexec/openpkg/rpm2cpio
michael@13	2058	%{l_prefix}/libexec/openpkg/rpm2cpio.8
michael@13	2059	%{l_prefix}/libexec/openpkg/rpmbuild.8
michael@428	2060	%{l_prefix}/libexec/openpkg/rpmcache
michael@428	2061	%{l_prefix}/libexec/openpkg/rpmcache.8
michael@428	2062	%{l_prefix}/libexec/openpkg/rpmdeps.8
michael@428	2063	%{l_prefix}/libexec/openpkg/rpmgraph.8
michael@428	2064	%{l_prefix}/libexec/openpkg/rpmgrep
michael@428	2065	%{l_prefix}/libexec/openpkg/rpmgrep.1
michael@428	2066	%{l_prefix}/libexec/openpkg/sea.8
michael@428	2067	%{l_prefix}/libexec/openpkg/sea.sh
michael@428	2068	%{l_prefix}/libexec/openpkg/search.8
michael@428	2069	%{l_prefix}/libexec/openpkg/search.pl
michael@428	2070	%{l_prefix}/libexec/openpkg/stack.8
michael@428	2071	%{l_prefix}/libexec/openpkg/stack.sh
michael@428	2072	%{l_prefix}/libexec/openpkg/shtool.sh
michael@428	2073	%{l_prefix}/libexec/openpkg/svs
michael@428	2074	%{l_prefix}/libexec/openpkg/svs.1
michael@13	2075	%{l_prefix}/libexec/openpkg/uuid
michael@13	2076	%{l_prefix}/libexec/openpkg/uuid.8
michael@13	2077	%dir %{l_prefix}/man
michael@13	2078	%dir %{l_prefix}/man/man1
michael@13	2079	%dir %{l_prefix}/man/man2
michael@13	2080	%dir %{l_prefix}/man/man3
michael@13	2081	%dir %{l_prefix}/man/man4
michael@13	2082	%dir %{l_prefix}/man/man5
michael@13	2083	%dir %{l_prefix}/man/man6
michael@13	2084	%dir %{l_prefix}/man/man7
michael@13	2085	%dir %{l_prefix}/man/man8
michael@13	2086	%dir %{l_prefix}/man/man9
michael@13	2087	%dir %{l_prefix}/man/cat1
michael@13	2088	%dir %{l_prefix}/man/cat2
michael@13	2089	%dir %{l_prefix}/man/cat3
michael@13	2090	%dir %{l_prefix}/man/cat4
michael@13	2091	%dir %{l_prefix}/man/cat5
michael@13	2092	%dir %{l_prefix}/man/cat6
michael@13	2093	%dir %{l_prefix}/man/cat7
michael@13	2094	%dir %{l_prefix}/man/cat8
michael@13	2095	%dir %{l_prefix}/man/cat9
michael@13	2096	%{l_prefix}/man/man1/openpkg.1
michael@13	2097	%dir %{l_prefix}/sbin
michael@13	2098	%dir %{l_prefix}/pub
michael@13	2099	%dir %{l_prefix}/share
michael@13	2100	%dir %{l_prefix}/var
michael@13	2101	%dir %{l_prefix}/local
michael@13	2102	%{l_prefix}/local/README
michael@13	2103	%{l_prefix}/local/.lsyncrc
michael@13	2104	%dir %{l_prefix}/local/PKG
michael@13	2105	%dir %{l_prefix}/local/bin
michael@13	2106	%dir %{l_prefix}/local/etc
michael@13	2107	%dir %{l_prefix}/local/include
michael@13	2108	%dir %{l_prefix}/local/info
michael@13	2109	%dir %{l_prefix}/local/lib
michael@13	2110	%dir %{l_prefix}/local/man
michael@13	2111	%dir %{l_prefix}/local/man/man1
michael@13	2112	%dir %{l_prefix}/local/man/man2
michael@13	2113	%dir %{l_prefix}/local/man/man3
michael@13	2114	%dir %{l_prefix}/local/man/man4
michael@13	2115	%dir %{l_prefix}/local/man/man5
michael@13	2116	%dir %{l_prefix}/local/man/man6
michael@13	2117	%dir %{l_prefix}/local/man/man7
michael@13	2118	%dir %{l_prefix}/local/man/man8
michael@13	2119	%dir %{l_prefix}/local/man/man9
michael@13	2120	%dir %{l_prefix}/local/man/cat1
michael@13	2121	%dir %{l_prefix}/local/man/cat2
michael@13	2122	%dir %{l_prefix}/local/man/cat3
michael@13	2123	%dir %{l_prefix}/local/man/cat4
michael@13	2124	%dir %{l_prefix}/local/man/cat5
michael@13	2125	%dir %{l_prefix}/local/man/cat6
michael@13	2126	%dir %{l_prefix}/local/man/cat7
michael@13	2127	%dir %{l_prefix}/local/man/cat8
michael@13	2128	%dir %{l_prefix}/local/man/cat9
michael@13	2129	%dir %{l_prefix}/local/sbin
michael@13	2130
michael@13	2131	%clean
michael@13	2132	# skip in bootstrap phase 2 (see openpkg.boot)
michael@13	2133	[ ".$OPENPKG_BOOT" = .1 ] && exit 0
michael@13	2134
michael@13	2135	# cleanup build area
michael@13	2136	rm -rf openpkg-%{version} >/dev/null 2>&1 || true
michael@13	2137
michael@13	2138	# cleanup installation area
michael@13	2139	rm -rf $RPM_BUILD_ROOT >/dev/null 2>&1 || true
michael@13	2140
michael@13	2141	%pre
michael@13	2142	# always performed for upgrades and because it doesn't harm!
michael@13	2143	# [ ".$1" != .1 ] && exit 0
michael@13	2144
michael@13	2145	# this procedure is only usable with root privileges
michael@444	2146	# (for nonroot installations it is not required at all)
michael@13	2147	cusr=`(id -un) 2>/dev/null ||\
michael@13	2148	(id | sed -e 's;^[^(]*(\([^)]*\)).*;\1;') 2>/dev/null ||\
michael@13	2149	(whoami) 2>/dev/null ||\
michael@13	2150	(who am i | cut "-d " -f1) 2>/dev/null ||\
michael@13	2151	echo $LOGNAME`
michael@13	2152
michael@13	2153	# determine runtime details (for both inside and outside RPM!!)
michael@428	2154	# - bootstrapping: $xxx is set from etc.wrapbin.sh
michael@13	2155	# - upgrading new: %{l_[smrn]{usr,grp}} is set via rpmmacros
michael@13	2156	# - upgrading old: %{l_[smrn]{usr,grp}} is not set at all
michael@13	2157	[ ".$susr" = . ] && susr="%{?l_susr}%{!?l_susr:root}"
michael@13	2158	[ ".$sgrp" = . ] && sgrp="%{?l_sgrp}%{!?l_sgrp:wheel}"
michael@13	2159	[ ".$musr" = . ] && musr="%{?l_musr}%{!?l_musr:%{l_fsusr}}"
michael@13	2160	[ ".$mgrp" = . ] && mgrp="%{?l_mgrp}%{!?l_mgrp:%{l_fsgrp}}"
michael@13	2161	[ ".$rusr" = . ] && rusr="%{?l_rusr}%{!?l_rusr:%{l_fsusr}-r}"
michael@13	2162	[ ".$rgrp" = . ] && rgrp="%{?l_rgrp}%{!?l_rgrp:%{l_fsgrp}-r}"
michael@13	2163	[ ".$nusr" = . ] && nusr="%{?l_nusr}%{!?l_nusr:%{l_fsusr}-n}"
michael@13	2164	[ ".$ngrp" = . ] && ngrp="%{?l_ngrp}%{!?l_ngrp:%{l_fsgrp}-n}"
michael@13	2165	[ ".$suid" = . ] && suid="%{?l_suid}"
michael@13	2166	[ ".$sgid" = . ] && sgid="%{?l_sgid}"
michael@13	2167	[ ".$muid" = . ] && muid="%{?l_muid}"
michael@13	2168	[ ".$mgid" = . ] && mgid="%{?l_mgid}"
michael@13	2169	[ ".$ruid" = . ] && ruid="%{?l_ruid}"
michael@13	2170	[ ".$rgid" = . ] && rgid="%{?l_rgid}"
michael@13	2171	[ ".$nuid" = . ] && nuid="%{?l_nuid}"
michael@13	2172	[ ".$ngid" = . ] && ngid="%{?l_ngid}"
michael@13	2173
michael@13	2174	# if any of these optional params are not used we won't have a
michael@13	2175	# corresponding macro either, so make use of one conditionally
michael@13	2176	[ ".$suid" = . ] && [ ".%{?l_suid:set}" = .set ] && suid="%{?l_suid}"
michael@13	2177	[ ".$sgid" = . ] && [ ".%{?l_sgid:set}" = .set ] && sgid="%{?l_sgid}"
michael@13	2178	[ ".$muid" = . ] && [ ".%{?l_muid:set}" = .set ] && muid="%{?l_muid}"
michael@13	2179	[ ".$mgid" = . ] && [ ".%{?l_mgid:set}" = .set ] && mgid="%{?l_mgid}"
michael@13	2180	[ ".$ruid" = . ] && [ ".%{?l_ruid:set}" = .set ] && ruid="%{?l_ruid}"
michael@13	2181	[ ".$rgid" = . ] && [ ".%{?l_rgid:set}" = .set ] && rgid="%{?l_rgid}"
michael@13	2182	[ ".$nuid" = . ] && [ ".%{?l_nuid:set}" = .set ] && nuid="%{?l_nuid}"
michael@13	2183	[ ".$ngid" = . ] && [ ".%{?l_ngid:set}" = .set ] && ngid="%{?l_ngid}"
michael@13	2184
michael@13	2185	# determine prefix
michael@13	2186	[ ".$prefix" = . ] && prefix="%{l_prefix}"
michael@13	2187	prefix=`echo "$prefix" | sed -e 's;//*;/;g' -e 's;/$;;'`
michael@13	2188
michael@444	2189	# Preflight check before update to make sure that the currently
michael@428	2190	# activated license is still valid. This is done just be friendly
michael@428	2191	# to people and to not too easily shoot theirself into the foot
michael@428	2192	# by blindly upgrading and then having to recognize that the new
michael@428	2193	# OpenPKG Framework is no longer covered by the old license.
michael@428	2194	if [ ".$1" = .2 ]; then
michael@428	2195	( OPENPKG_FRAMEWORK_RELEASE="%{release}"
michael@428	2196	export OPENPKG_FRAMEWORK_RELEASE
michael@428	2197	# LATER:
michael@428	2198	# $prefix/bin/openpkg rpm -q openpkg >/dev/null 2>&1 || exit $?
michael@428	2199	# if [ $? -ne 0 ]; then
michael@428	2200	# NOW:
michael@428	2201	output="`$prefix/bin/openpkg rpm -q openpkg 2>&1 | grep 'ENVIRONMENT ANOMALY'`"
michael@428	2202	if [ ".$output" != . ]; then
michael@428	2203	id="`($prefix/bin/openpkg license active) 2>/dev/null`"
michael@428	2204	[ ".$id" = . ] && id="UNKNOWN"
michael@428	2205	( echo "Attention, your currently active license \"$id\" does"
michael@428	2206	echo "not allow you to use this newer version of the OpenPKG Framework!"
michael@444	2207	echo "We cancel this update to prevent you from a runtime failure."
michael@428	2208	echo "Please first upgrade to a newer license with the command:"
michael@428	2209	echo " \$ $prefix/bin/openpkg license update $id <file>"
michael@428	2210	) | $prefix/lib/openpkg/rpmtool msg -b -t error
michael@428	2211	exit 42
michael@428	2212	fi
michael@428	2213	) || exit $?
michael@428	2214	fi
michael@428	2215
michael@13	2216	# register instance in presence file
michael@13	2217	presence="/etc/openpkg"
michael@13	2218	exists=`cat $presence 2>/dev/null | egrep "^ *${prefix} *\$"`
michael@13	2219	if [ ".$exists" = . ]; then
michael@13	2220	( umask 022
michael@13	2221	echo "${prefix}" >>$presence
michael@13	2222	) 2>/dev/null || true
michael@13	2223	fi
michael@13	2224
michael@13	2225	# determine user/group ids
michael@13	2226	for class in s m r n; do
michael@13	2227	eval "xusr=\"\$${class}usr\""
michael@13	2228	eval "xgrp=\"\$${class}grp\""
michael@13	2229	eval "xuid=\"\$${class}uid\""
michael@13	2230	eval "xgid=\"\$${class}gid\""
michael@13	2231	if [ ".$xuid" = . ]; then
michael@428	2232	case "$plid" in
michael@428	2233	Darwin/10.[1-9]* | Darwin/1[1-9].* )
michael@428	2234	xuid=`dscl . -read "/users/${xusr}" UniqueID 2>/dev/null | awk '{ print $2; }'`
michael@428	2235	;;
michael@428	2236	* )
michael@428	2237	xuid=`(getent passwd "${xusr}"; \
michael@428	2238	grep "^${xusr}:" /etc/passwd; \
michael@428	2239	ypmatch "${xusr}" passwd; \
michael@428	2240	nismatch "${xusr}" passwd; \
michael@428	2241	nidump passwd . | grep "^${xusr}:") 2>/dev/null | \
michael@428	2242	sed -e 'q' | awk -F: '{ print $3; }'`
michael@428	2243	;;
michael@428	2244	esac
michael@13	2245	if [ ".$xuid" = . ]; then
michael@13	2246	# seek for a reasonably uid/gid pair
michael@13	2247	xuid=1000
michael@13	2248	ok=0
michael@13	2249	while [ ".$ok" = .0 ]; do
michael@13	2250	eval "u_exists=\$u_exists_$xuid"
michael@13	2251	if [ ".$u_exists" = . ]; then
michael@428	2252	case "$plid" in
michael@428	2253	Darwin/10.[1-9]* | Darwin/1[1-9].* )
michael@428	2254	u_exists=`dscl . -search /users UniqueID "$xuid" 2>/dev/null`
michael@428	2255	;;
michael@428	2256	* )
michael@428	2257	u_exists=`(getent passwd; cat /etc/passwd; ypcat passwd; niscat passwd; nidump passwd .) 2>/dev/null |\
michael@428	2258	grep "^[^:]*:[^:]*:$xuid:"`
michael@428	2259	;;
michael@428	2260	esac
michael@13	2261	fi
michael@13	2262	eval "g_exists=\$g_exists_$xuid"
michael@13	2263	if [ ".$g_exists" = . ]; then
michael@428	2264	case "$plid" in
michael@428	2265	Darwin/10.[1-9]* | Darwin/1[1-9].* )
michael@428	2266	g_exists=`dscl . -search /groups PrimaryGroupID "$xuid" 2>/dev/null`
michael@428	2267	;;
michael@428	2268	* )
michael@428	2269	g_exists=`(getent group; cat /etc/group; ypcat group; niscat group; nidump group .) 2>/dev/null |\
michael@428	2270	grep "^[^:]*:[^:]*:$xuid:"`
michael@428	2271	esac
michael@13	2272	fi
michael@13	2273	if [ ".$u_exists" = . -a ".$g_exists" = . ]; then
michael@13	2274	ok=1
michael@13	2275	break
michael@13	2276	fi
michael@13	2277	xuid=`expr $xuid + 1`
michael@13	2278	done
michael@13	2279	eval "u_exists_$xuid=yes"
michael@13	2280	eval "g_exists_$xuid=yes"
michael@13	2281	fi
michael@13	2282	fi
michael@13	2283	if [ ".$xgid" = . ]; then
michael@13	2284	xgid=`(getent group "${xgrp}"; \
michael@13	2285	grep "^${xgrp}:" /etc/group; \
michael@13	2286	ypmatch "${xgrp}" group; \
michael@13	2287	nismatch "${xgrp}" group; \
michael@428	2288	nidump group . | grep "^${xgrp}:"; \
michael@428	2289	dscl . -read "/groups/${xgrp}" | grep RecordName) 2>/dev/null | \
michael@13	2290	sed -e 'q' | awk -F: '{ print $3; }'`
michael@13	2291	if [ ".$xgid" = . ]; then
michael@13	2292	xgid="$xuid"
michael@13	2293	fi
michael@13	2294	fi
michael@13	2295	eval "${class}uid=\"$xuid\""
michael@13	2296	eval "${class}gid=\"$xgid\""
michael@13	2297	done
michael@13	2298
michael@13	2299	# determine platform id
michael@13	2300	s=`(uname -s) 2>/dev/null` || s='Unknown'
michael@13	2301	r=`(uname -r) 2>/dev/null` || r='0.0'
michael@13	2302	plid="${s}/${r}"
michael@13	2303
michael@13	2304	# add entry to /etc/shells
michael@13	2305	shell="${prefix}/lib/openpkg/bash"
michael@13	2306	if [ -f /etc/shells ]; then
michael@13	2307	exists=`cat /etc/shells 2>/dev/null | grep "^$shell"`
michael@13	2308	if [ ".$exists" = . ]; then
michael@13	2309	if [ ".$cusr" != ".root" ]; then
michael@13	2310	echo "openpkg:WARNING: skipping addition of $shell to /etc/shells" 1>&2
michael@444	2311	echo "openpkg:WARNING: (would require root privileges)" 1>&2
michael@13	2312	else
michael@13	2313	echo "${shell}" >>/etc/shells
michael@13	2314	fi
michael@13	2315	fi
michael@13	2316	fi
michael@13	2317
michael@13	2318	# clear pending deferred actions
michael@13	2319	rm -f %{l_prefix}.pre-group-process.sh %{l_prefix}.pre-post-process.sh >/dev/null 2>&1
michael@13	2320
michael@13	2321	# create the hierarchy user/group
michael@13	2322	for req in "superuser:${susr}:${suid}:${sgrp}:${sgid}" \
michael@13	2323	"management:${musr}:${muid}:${mgrp}:${mgid}" \
michael@13	2324	"restricted:${rusr}:${ruid}:${rgrp}:${rgid}" \
michael@444	2325	"nonprivileged:${nusr}:${nuid}:${ngrp}:${ngid}"; do
michael@13	2326	# split request into class/usr/uid/grp/gid
michael@13	2327	OIFS="$IFS"; IFS=":"; set -- $req; IFS="$OIFS"
michael@13	2328	class="$1"; usr="$2"; uid="$3"; grp="$4"; gid="$5"
michael@13	2329
michael@13	2330	# check whether user already exists
michael@13	2331	exists=`(getent passwd "$usr"; \
michael@13	2332	grep "^$usr:" /etc/passwd; \
michael@13	2333	ypmatch "$usr" passwd; \
michael@13	2334	nismatch "$usr" passwd; \
michael@428	2335	nidump passwd . | grep "^$usr:"; \
michael@428	2336	dscl . -read "/users/$usr" | grep RecordName) 2>/dev/null | \
michael@13	2337	sed -e 'q'`
michael@13	2338	if [ ".$exists" = . ]; then
michael@13	2339	if [ ".$cusr" != ".root" ]; then
michael@13	2340	echo "openpkg:WARNING: skipping creation of OpenPKG $class user $usr" 1>&2
michael@444	2341	echo "openpkg:WARNING: (would require root privileges)" 1>&2
michael@13	2342	else
michael@13	2343	# add entry to passwd database
michael@13	2344	realname="${prefix} OpenPKG ($class)"
michael@13	2345	case "$plid" in
michael@13	2346	FreeBSD/* | NetBSD/* )
michael@13	2347	file=/etc/master.passwd
michael@13	2348	entry="${usr}:*:${uid}:${gid}::0:0:${realname}:${prefix}:${shell}"
michael@13	2349	update="(PATH=\$PATH:/usr/sbin; pwd_mkdb -p /etc/master.passwd)"
michael@13	2350	;;
michael@13	2351	Linux/* )
michael@13	2352	file=/etc/passwd
michael@13	2353	entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
michael@13	2354	update="(PATH=\$PATH:/usr/sbin; pwconv)"
michael@13	2355	;;
michael@13	2356	SunOS/5.* | UnixWare/* )
michael@13	2357	file=/etc/passwd
michael@13	2358	entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
michael@13	2359	update="(PATH=\$PATH:/usr/sbin; pwconv)"
michael@13	2360	;;
michael@13	2361	AIX/* )
michael@13	2362	# intentionally do nothing here
michael@13	2363	:
michael@13	2364	;;
michael@13	2365	OSF1/V5.* )
michael@13	2366	file=/etc/passwd
michael@13	2367	entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
michael@13	2368	update="(PATH=\$PATH:/usr/sbin; mkpasswd /etc/passwd)"
michael@13	2369	;;
michael@13	2370	HP-UX/* )
michael@13	2371	file=/etc/passwd
michael@13	2372	entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
michael@13	2373	update=":"
michael@13	2374	;;
michael@13	2375	Darwin/* )
michael@13	2376	# intentionally do nothing here
michael@13	2377	:
michael@13	2378	;;
michael@13	2379	IRIX*/6.* )
michael@13	2380	file=/etc/passwd
michael@13	2381	entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
michael@13	2382	if [ -f /etc/shadow ]
michael@13	2383	then update="(PATH=\$PATH:/sbin; pwconv)"
michael@13	2384	else update=":"
michael@13	2385	fi
michael@13	2386	;;
michael@428	2387	CYGWIN*/* )
michael@428	2388	file=/etc/passwd
michael@428	2389	entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
michael@428	2390	update=":"
michael@428	2391	;;
michael@13	2392	esac
michael@13	2393	case "$plid" in
michael@428	2394	Darwin/10.[1-9]* | Darwin/1[1-9].* )
michael@428	2395	dscl . -create "/users/${usr}"
michael@428	2396	dscl . -create "/users/${usr}" Password "*"
michael@428	2397	dscl . -create "/users/${usr}" UniqueID "${uid}"
michael@428	2398	dscl . -create "/users/${usr}" PrimaryGroupID "${gid}"
michael@428	2399	dscl . -create "/users/${usr}" RealName "${realname}"
michael@428	2400	dscl . -create "/users/${usr}" NFSHomeDirectory "${prefix}"
michael@428	2401	dscl . -create "/users/${usr}" UserShell "${shell}"
michael@428	2402	;;
michael@13	2403	Darwin/* )
michael@13	2404	niutil -create . "/users/${usr}"
michael@13	2405	niutil -createprop . "/users/${usr}" passwd "*"
michael@13	2406	niutil -createprop . "/users/${usr}" uid "${uid}"
michael@13	2407	niutil -createprop . "/users/${usr}" gid "${gid}"
michael@13	2408	niutil -createprop . "/users/${usr}" realname "${realname}"
michael@13	2409	niutil -createprop . "/users/${usr}" home "${prefix}"
michael@13	2410	niutil -createprop . "/users/${usr}" shell "${shell}"
michael@13	2411	;;
michael@13	2412	AIX/* )
michael@13	2413	mkuser id="${uid}" gecos="${realname}" home="${prefix}" "${usr}"
michael@13	2414	cp /etc/security/login.cfg /etc/security/login.cfg.bak && \
michael@13	2415	sed -e "/^usw:/,/^[^ ]/s;\\( *shells =.*\\) *\$;\\1,$shell;" \
michael@13	2416	</etc/security/login.cfg.bak >/etc/security/login.cfg && \
michael@13	2417	rm -f /etc/security/login.cfg.bak >/dev/null 2>&1
michael@13	2418	# defer both the setting of the primary group and the shell,
michael@13	2419	# as they do not exist at this stage of processing.
michael@13	2420	echo "chuser pgrp=\"${grp}\" \"${usr}\"" >>%{l_prefix}.pre-group-process.sh
michael@13	2421	echo "chuser shell=\"${shell}\" \"${usr}\"" >>%{l_prefix}.pre-post-process.sh
michael@13	2422	;;
michael@13	2423	* )
michael@13	2424	cp $file $file.bak && \
michael@13	2425	(grep -v '^+:' $file.bak; echo $entry; grep '^+:' $file.bak) >$file
michael@13	2426	rm -f $file.bak >/dev/null 2>&1
michael@13	2427	eval $update
michael@13	2428	[ $? -ne 0 ] && exit $?
michael@13	2429	;;
michael@13	2430	esac
michael@13	2431	fi
michael@13	2432	fi
michael@13	2433
michael@13	2434	# check whether group already exists
michael@13	2435	exists=`(getent group "$grp"; \
michael@13	2436	grep "^$grp:" /etc/group; \
michael@13	2437	ypmatch "$grp" group; \
michael@13	2438	nismatch "$grp" group; \
michael@428	2439	nidump group . | grep "^$grp:"; \
michael@428	2440	dscl . -read "/groups/$grp" | grep RecordName) 2>/dev/null | \
michael@13	2441	sed -e 'q'`
michael@13	2442	if [ ".$exists" = . ]; then
michael@13	2443	if [ ".$cusr" != ".root" ]; then
michael@13	2444	echo "openpkg:WARNING: skipping creation of OpenPKG $class group $grp" 1>&2
michael@444	2445	echo "openpkg:WARNING: (would require root privileges)" 1>&2
michael@13	2446	else
michael@13	2447	case "$plid" in
michael@428	2448	Darwin/10.[1-9]* | Darwin/1[1-9].* )
michael@428	2449	dscl . -create "/groups/${grp}"
michael@428	2450	dscl . -create "/groups/${grp}" Password "*"
michael@428	2451	dscl . -create "/groups/${grp}" PrimaryGroupID "${gid}"
michael@428	2452	dscl . -create "/groups/${grp}" GroupMembership "${usr}"
michael@428	2453	;;
michael@13	2454	Darwin/* )
michael@13	2455	niutil -create . "/groups/${grp}"
michael@13	2456	niutil -createprop . "/groups/${grp}" gid "${gid}"
michael@13	2457	niutil -createprop . "/groups/${grp}" users "${usr}"
michael@13	2458	;;
michael@13	2459	AIX/* )
michael@13	2460	mkgroup id="${gid}" users="${usr}" "${grp}"
michael@13	2461	;;
michael@13	2462	* )
michael@13	2463	# add entry to group database
michael@13	2464	file=/etc/group
michael@13	2465	entry="${grp}:*:${gid}:${usr}"
michael@13	2466	cp $file $file.bak && \
michael@13	2467	(grep -v '^+:' $file.bak; echo $entry; grep '^+:' $file.bak) >$file
michael@13	2468	rm -f $file.bak >/dev/null 2>&1
michael@13	2469	;;
michael@13	2470	esac
michael@13	2471	fi
michael@13	2472	fi
michael@13	2473	done
michael@13	2474
michael@13	2475	# optional group processing (deferred adjustment of primary group)
michael@13	2476	if [ -f %{l_prefix}.pre-group-process.sh ]; then
michael@13	2477	sh %{l_prefix}.pre-group-process.sh
michael@13	2478	rm -f %{l_prefix}.pre-group-process.sh
michael@13	2479	fi
michael@13	2480
michael@13	2481	# invalidate passwd and group tables from Name Service Cache Daemon to
michael@13	2482	# ensure chown/chgrp works immediately after pwconv on Linux and Solaris
michael@13	2483	if [ -x /usr/sbin/nscd ]; then
michael@13	2484	/usr/sbin/nscd -i passwd >/dev/null 2>&1 || true
michael@428	2485	/usr/sbin/nscd -i group >/dev/null 2>&1 || true
michael@13	2486	fi
michael@13	2487
michael@13	2488	# create the startup/shutdown transfer script
michael@428	2489	name_old="`echo "$prefix" | sed -e 's;/;;g'`"
michael@428	2490	name="openpkg-`echo "$prefix" | sed -e 's;[^a-zA-Z0-9];;g'`"
michael@13	2491	if [ ".$cusr" != ".root" ]; then
michael@444	2492	echo "openpkg:WARNING: skipping creation of system runcommand hooks" 1>&2
michael@444	2493	echo "openpkg:WARNING: (would require root privileges)" 1>&2
michael@13	2494	else
michael@13	2495	case "$plid" in
michael@13	2496	FreeBSD/* )
michael@428	2497	if [ -f /etc/rc.d/${name_old} ]; then
michael@428	2498	rm -f /etc/rc.d/${name_old}
michael@428	2499	fi
michael@428	2500	if [ ! -f /etc/rc.d/${name} ]; then
michael@13	2501	# install transfer script
michael@428	2502	rm -f /etc/rc.d/${name} >/dev/null 2>&1
michael@13	2503	( echo "#!/bin/sh"
michael@13	2504	echo "##"
michael@428	2505	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@13	2506	echo "##"
michael@13	2507	echo ""
michael@428	2508	echo "# PROVIDE: ${name}"
michael@13	2509	echo "# REQUIRE: LOGIN"
michael@13	2510	echo "# KEYWORD: shutdown"
michael@13	2511	echo ""
michael@13	2512	echo ". /etc/rc.subr"
michael@13	2513	echo ""
michael@13	2514	echo "name=\"openpkg_${name}\""
michael@13	2515	echo "start_cmd=\"openpkg_rc_all start\""
michael@13	2516	echo "stop_cmd=\"openpkg_rc_all stop\""
michael@13	2517	echo "restart_cmd=\"openpkg_rc_all stop start\""
michael@13	2518	echo ""
michael@13	2519	echo "openpkg_rc_all () {"
michael@428	2520	echo " if [ -f ${prefix}/bin/openpkg ]; then"
michael@428	2521	echo " ${prefix}/bin/openpkg rc all \"\$@\""
michael@13	2522	echo " fi"
michael@13	2523	echo "}"
michael@13	2524	echo ""
michael@13	2525	echo "load_rc_config \$name"
michael@13	2526	echo "run_rc_command \"\$1\""
michael@13	2527	echo ""
michael@428	2528	) >/etc/rc.d/${name}
michael@428	2529	chmod 755 /etc/rc.d/${name}
michael@13	2530	fi
michael@13	2531	;;
michael@13	2532	NetBSD/* )
michael@428	2533	if [ -f /etc/rc.d/${name_old} ]; then
michael@428	2534	rm -f /etc/rc.d/${name_old}
michael@428	2535	fi
michael@13	2536	if [ ! -f /etc/rc.d/${name} ]; then
michael@13	2537	( echo "#!/bin/sh"
michael@13	2538	echo "##"
michael@13	2539	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@13	2540	echo "##"
michael@13	2541	echo "## PROVIDE: ${name}"
michael@13	2542	echo "## REQUIRE: DAEMON LOGIN NETWORK SERVERS"
michael@13	2543	echo "##"
michael@13	2544	echo ""
michael@428	2545	echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
michael@13	2546	echo "case \$1 in"
michael@428	2547	echo " start ) exec ${prefix}/bin/openpkg rc all start ;;"
michael@428	2548	echo " stop ) exec ${prefix}/bin/openpkg rc all stop ;;"
michael@428	2549	echo " restart ) exec ${prefix}/bin/openpkg rc all stop start ;;"
michael@13	2550	echo " status ) ;;"
michael@13	2551	echo "esac"
michael@13	2552	) >/etc/rc.d/${name}
michael@13	2553	chmod 755 /etc/rc.d/${name}
michael@13	2554	fi
michael@13	2555	;;
michael@13	2556	Linux/* )
michael@13	2557	if [ -f /etc/gentoo-release ]; then
michael@428	2558	if [ -f /etc/init.d/${name_old} ]; then
michael@428	2559	rm -f /etc/init.d/${name_old}
michael@428	2560	fi
michael@428	2561	if [ ! -f /etc/init.d/${name} ]; then
michael@13	2562	# install transfer script
michael@13	2563	( echo "#!/sbin/runscript"
michael@13	2564	echo "##"
michael@428	2565	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@13	2566	echo "##"
michael@13	2567	echo ""
michael@13	2568	echo "depend() {"
michael@13	2569	echo " after *"
michael@13	2570	echo "}"
michael@13	2571	echo ""
michael@13	2572	echo "checkconfig() {"
michael@428	2573	echo " [ -f ${prefix}/bin/openpkg ] || return 1"
michael@13	2574	echo " case $1 in"
michael@428	2575	echo " start ) exec ${prefix}/bin/openpkg rc all start ;;"
michael@428	2576	echo " stop ) exec ${prefix}/bin/openpkg rc all stop ;;"
michael@13	2577	echo " esac"
michael@13	2578	echo "}"
michael@13	2579	echo ""
michael@13	2580	echo "start() {"
michael@13	2581	echo " checkconfig || return 1"
michael@13	2582	echo " ebegin "Starting OpenPKG ${prefix} hierarchy""
michael@428	2583	echo " exec ${prefix}/bin/openpkg rc all start"
michael@13	2584	echo " eend 0"
michael@13	2585	echo "}"
michael@13	2586	echo ""
michael@13	2587	echo "stop() {"
michael@13	2588	echo " checkconfig || return 1"
michael@13	2589	echo " ebegin "Stopping OpenPKG ${prefix} hierarchy""
michael@428	2590	echo " exec ${prefix}/bin/openpkg rc all stop"
michael@13	2591	echo " eend 0"
michael@13	2592	echo "}"
michael@428	2593	) >/etc/init.d/${name}
michael@428	2594	chmod 755 /etc/init.d/${name}
michael@428	2595	/sbin/rc-update add ${name} default
michael@428	2596	fi
michael@428	2597	elif [ -f /etc/redhat-release ]; then
michael@428	2598	sroot=/etc/rc.d/init.d
michael@428	2599	if [ ! -f $sroot/${name} ]; then
michael@428	2600	# install transfer script
michael@428	2601	( echo "#!/bin/sh"
michael@428	2602	echo "##"
michael@428	2603	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@428	2604	echo "##"
michael@428	2605	echo ""
michael@428	2606	echo "# chkconfig: 2345 99 00"
michael@428	2607	echo "# description: OpenPKG ${prefix}"
michael@428	2608	echo ""
michael@428	2609	echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
michael@428	2610	echo "case \$1 in"
michael@428	2611	echo " start ) exec ${prefix}/bin/openpkg rc all start ;;"
michael@428	2612	echo " stop ) exec ${prefix}/bin/openpkg rc all stop ;;"
michael@428	2613	echo "esac"
michael@428	2614	) >$sroot/${name}
michael@428	2615	chmod 755 $sroot/${name}
michael@428	2616	# activate script
michael@428	2617	/sbin/chkconfig --add ${name}
michael@428	2618	/sbin/chkconfig ${name} on
michael@13	2619	fi
michael@13	2620	else
michael@13	2621	# sroot: script root directory
michael@13	2622	# lroot: link root directory
michael@13	2623	if [ -f /etc/debian_version ]; then
michael@13	2624	sroot=/etc/init.d
michael@428	2625	lroot=/etc/rc%%d.d
michael@428	2626	elif [ -f /etc/mandrake-release ]; then
michael@13	2627	sroot=/etc/rc.d/init.d
michael@428	2628	lroot=/etc/rc.d/rc%%d.d
michael@13	2629	elif [ -f /etc/SuSE-release ]; then
michael@13	2630	sroot=/etc/init.d
michael@428	2631	lroot=/etc/init.d/rc%%d.d
michael@13	2632	elif [ -f /etc/slackware-version ]; then
michael@13	2633	sroot=/etc/rc.d
michael@428	2634	lroot=/etc/rc.d/rc%%d.d
michael@13	2635	name="rc.${name}"
michael@13	2636	for i in 0 1 2 3 4 5 6; do
michael@428	2637	l=`echo $lroot | sed -e "s;%%d;$i;"`
michael@13	2638	if [ ! -d $l ]; then
michael@13	2639	mkdir $l 2>&1 || true
michael@13	2640	fi
michael@13	2641	done
michael@13	2642	else
michael@13	2643	echo "WARNING: you are not running one of the supported standard" 1>&2
michael@13	2644	echo "WARNING: Linux platforms (Debian, RedHat, Mandrake, SuSE, Gentoo)." 1>&2
michael@13	2645	echo "WARNING: Guessing the location of the system init scripts!" 1>&2
michael@13	2646	sroot=""
michael@13	2647	lroot=""
michael@13	2648	for sr in /etc/rc.d/init.d /etc/init.d /sbin/init.d; do
michael@13	2649	if [ -d $sr ]; then
michael@13	2650	sroot="$sr"
michael@13	2651	break
michael@13	2652	fi
michael@13	2653	done
michael@13	2654	for lr in /etc/rc.d/rc2.d /etc/rc2.d /sbin/init.d/rc2.d; do
michael@13	2655	if [ -d $lr ]; then
michael@428	2656	lroot="`echo $lr | sed -e 's;2;%%d;'`"
michael@13	2657	break
michael@13	2658	fi
michael@13	2659	done
michael@13	2660	if [ ".$sroot" = . -o ".$lroot" = . ]; then
michael@13	2661	echo "ERROR: Failed to guess the location of the system init scripts!" 1>&2
michael@13	2662	exit 1
michael@13	2663	fi
michael@13	2664	fi
michael@428	2665	if [ -f $sroot/${name_old} ]; then
michael@428	2666	rm -f $sroot/${name_old}
michael@428	2667	fi
michael@13	2668	if [ ! -f $sroot/${name} ]; then
michael@13	2669	# install transfer script
michael@13	2670	( echo "#!/bin/sh"
michael@13	2671	echo "##"
michael@13	2672	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@13	2673	echo "##"
michael@13	2674	echo ""
michael@428	2675	echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
michael@13	2676	echo "case \$1 in"
michael@428	2677	echo " start ) exec ${prefix}/bin/openpkg rc all start ;;"
michael@428	2678	echo " stop ) exec ${prefix}/bin/openpkg rc all stop ;;"
michael@13	2679	echo "esac"
michael@13	2680	) >$sroot/${name}
michael@13	2681	chmod 755 $sroot/${name}
michael@13	2682	# create corresponding symbolic links
michael@13	2683	for i in 2 3 4 5; do
michael@428	2684	ln -s $sroot/${name} `echo $lroot | sed -e "s;%%d;$i;"`/S99${name}
michael@13	2685	done
michael@13	2686	for i in 0 1 6; do
michael@428	2687	ln -s $sroot/${name} `echo $lroot | sed -e "s;%%d;$i;"`/K00${name}
michael@13	2688	done
michael@13	2689	fi
michael@13	2690	fi
michael@13	2691	;;
michael@437	2692	SunOS/5.1* )
michael@443	2693	suname="`echo "$prefix" | sed -e 's;[^a-zA-Z0-9];;g'`"
michael@449	2694	svcdir=/`[ -d /lib/svc/manifest ] && echo lib || echo var`
michael@449	2695	if [ ! -d /${svcdir}/svc/manifest/openpkg ]; then
michael@449	2696	mkdir /${svcdir}/svc/manifest/openpkg
michael@437	2697	fi
michael@449	2698	if [ ! -f /${svcdir}/svc/manifest/openpkg/${suname}.xml ]; then
michael@437	2699	# install SMF manifest
michael@437	2700	( echo "<?xml version=\"1.0\"?>"
michael@437	2701	echo "<!DOCTYPE service_bundle SYSTEM \"/usr/share/lib/xml/dtd/service_bundle.dtd.1\">"
michael@443	2702	echo "<service_bundle type='manifest' name='OpenPKG:${suname}'>"
michael@437	2703	echo " <service"
michael@443	2704	echo " name='openpkg/${suname}'"
michael@437	2705	echo " type='service'"
michael@437	2706	echo " version='1'>"
michael@449	2707	echo " <create_default_instance enabled='false' />"
michael@437	2708	echo " <single_instance />"
michael@437	2709	echo " <dependency"
michael@437	2710	echo " name='filesystem'"
michael@437	2711	echo " type='service'"
michael@437	2712	echo " grouping='require_all'"
michael@437	2713	echo " restart_on='none'>"
michael@437	2714	echo " <service_fmri value='svc:/system/filesystem/local' />"
michael@437	2715	echo " </dependency>"
michael@437	2716	echo " <dependency"
michael@437	2717	echo " name='name-services'"
michael@437	2718	echo " type='service'"
michael@437	2719	echo " grouping='require_all'"
michael@437	2720	echo " restart_on='none'>"
michael@437	2721	echo " <service_fmri value='svc:/milestone/name-services' />"
michael@437	2722	echo " </dependency>"
michael@437	2723	echo " <dependency"
michael@437	2724	echo " name='multi-user-server'"
michael@437	2725	echo " type='service'"
michael@437	2726	echo " grouping='require_all'"
michael@437	2727	echo " restart_on='none'>"
michael@437	2728	echo " <service_fmri value='svc:/milestone/multi-user-server' />"
michael@437	2729	echo " </dependency>"
michael@437	2730	echo " <dependency"
michael@437	2731	echo " name='network'"
michael@437	2732	echo " type='service'"
michael@437	2733	echo " grouping='require_all'"
michael@437	2734	echo " restart_on='none'>"
michael@437	2735	echo " <service_fmri value='svc:/milestone/network' />"
michael@437	2736	echo " </dependency>"
michael@437	2737	echo " <exec_method"
michael@437	2738	echo " type='method'"
michael@437	2739	echo " name='start'"
michael@437	2740	echo " exec='${prefix}/etc/rc all start'"
michael@437	2741	echo " timeout_seconds='180'>"
michael@437	2742	echo " <method_context>"
michael@437	2743	echo " <method_credential user='root' group='root' />"
michael@437	2744	echo " </method_context>"
michael@437	2745	echo " </exec_method>"
michael@437	2746	echo " <exec_method"
michael@437	2747	echo " type='method'"
michael@449	2748	echo " name='refresh'"
michael@449	2749	echo " exec='${prefix}/etc/rc all restart'"
michael@449	2750	echo " timeout_seconds='270'>"
michael@449	2751	echo " <method_context>"
michael@449	2752	echo " <method_credential user='root' group='root' />"
michael@449	2753	echo " </method_context>"
michael@449	2754	echo " </exec_method>"
michael@449	2755	echo " <exec_method"
michael@449	2756	echo " type='method'"
michael@437	2757	echo " name='stop'"
michael@437	2758	echo " exec='${prefix}/etc/rc all stop'"
michael@437	2759	echo " timeout_seconds='180'>"
michael@437	2760	echo " </exec_method>"
michael@437	2761	echo " <property_group name='startd' type='framework'>"
michael@437	2762	echo " <propval"
michael@437	2763	echo " name='ignore_error'"
michael@437	2764	echo " type='astring'"
michael@437	2765	echo " value='core,signal' />"
michael@437	2766	echo " </property_group>"
michael@437	2767	echo " <property_group name='startd' type='framework'>"
michael@437	2768	echo " <propval"
michael@437	2769	echo " name='duration'"
michael@437	2770	echo " type='astring'"
michael@437	2771	echo " value='transient' />"
michael@437	2772	echo " </property_group>"
michael@437	2773	echo " <property_group name='general' type='framework'>"
michael@437	2774	echo " <propval"
michael@437	2775	echo " name='action_authorization'"
michael@437	2776	echo " type='astring'"
michael@443	2777	echo " value='solaris.smf.manage.openpkg.${suname}' />"
michael@437	2778	echo " </property_group>"
michael@437	2779	echo " <stability value='Unstable' />"
michael@437	2780	echo " <template>"
michael@437	2781	echo " <common_name>"
michael@437	2782	echo " <loctext xml:lang='C'>OpenPKG Instance ${prefix}</loctext>"
michael@437	2783	echo " </common_name>"
michael@437	2784	echo " </template>"
michael@437	2785	echo " </service>"
michael@437	2786	echo "</service_bundle>"
michael@449	2787	) >/${svcdir}/svc/manifest/openpkg/${suname}.xml
michael@448	2788	/usr/sbin/svcadm restart svc:/system/manifest-import
michael@449	2789	( echo "/usr/sbin/svcadm enable svc:/openpkg/${suname}:default"
michael@437	2790	) >%{l_prefix}.pre-post-process.sh
michael@437	2791	fi
michael@437	2792	;;
michael@428	2793	SunOS/5.* )
michael@428	2794	if [ -f /etc/init.d/${name_old} ]; then
michael@428	2795	rm -f /etc/init.d/${name_old}
michael@329	2796	fi
michael@13	2797	if [ ! -f /etc/init.d/${name} ]; then
michael@13	2798	# install transfer script
michael@13	2799	( echo "#!/bin/sh"
michael@13	2800	echo "##"
michael@13	2801	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@13	2802	echo "##"
michael@13	2803	echo ""
michael@428	2804	echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
michael@13	2805	echo "case \$1 in"
michael@428	2806	echo " start ) exec ${prefix}/bin/openpkg rc all start ;;"
michael@428	2807	echo " stop ) exec ${prefix}/bin/openpkg rc all stop ;;"
michael@13	2808	echo "esac"
michael@13	2809	) >/etc/init.d/${name}
michael@13	2810	chmod 755 /etc/init.d/${name}
michael@13	2811	# create corresponding symbolic links
michael@13	2812	( cd /etc
michael@13	2813	ln init.d/${name} rc3.d/S99${name}
michael@13	2814	ln init.d/${name} rc0.d/K00${name}
michael@13	2815	ln init.d/${name} rc1.d/K00${name}
michael@13	2816	) || exit $?
michael@13	2817	fi
michael@13	2818	;;
michael@13	2819	UnixWare/* )
michael@428	2820	if [ -f /etc/init.d/${name_old} ]; then
michael@428	2821	rm -f /etc/init.d/${name_old}
michael@428	2822	fi
michael@13	2823	if [ ! -f /etc/init.d/${name} ]; then
michael@13	2824	# install transfer script
michael@13	2825	( echo "#!/bin/sh"
michael@13	2826	echo "##"
michael@13	2827	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@13	2828	echo "##"
michael@13	2829	echo ""
michael@428	2830	echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
michael@13	2831	echo "case \$1 in"
michael@428	2832	echo " start ) exec ${prefix}/bin/openpkg rc all start ;;"
michael@428	2833	echo " stop ) exec ${prefix}/bin/openpkg rc all stop ;;"
michael@13	2834	echo "esac"
michael@13	2835	) >/etc/init.d/${name}
michael@13	2836	chmod 755 /etc/init.d/${name}
michael@13	2837	# create corresponding symbolic links
michael@13	2838	( cd /etc
michael@13	2839	ln init.d/${name} rc2.d/S99${name}
michael@13	2840	ln init.d/${name} rc0.d/K00${name}
michael@13	2841	ln init.d/${name} rc1.d/K00${name}
michael@13	2842	) || exit $?
michael@13	2843	fi
michael@13	2844	;;
michael@13	2845	AIX/* )
michael@428	2846	if [ -f /etc/rc.d/init.d/${name_old} ]; then
michael@428	2847	rm -f /etc/rc.d/init.d/${name_old}
michael@428	2848	fi
michael@13	2849	if [ ! -f /etc/rc.d/init.d/${name} ]; then
michael@13	2850	# install transfer script
michael@13	2851	( echo "#!/bin/sh"
michael@13	2852	echo "##"
michael@13	2853	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@13	2854	echo "##"
michael@13	2855	echo ""
michael@428	2856	echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
michael@13	2857	echo "case \$1 in"
michael@428	2858	echo " start ) exec ${prefix}/bin/openpkg rc all start ;;"
michael@428	2859	echo " stop ) exec ${prefix}/bin/openpkg rc all stop ;;"
michael@13	2860	echo "esac"
michael@13	2861	) >/etc/rc.d/init.d/${name}
michael@13	2862	chmod 755 /etc/rc.d/init.d/${name}
michael@13	2863	# create corresponding symbolic links
michael@13	2864	( cd /etc/rc.d
michael@13	2865	ln -s ../init.d/${name} rc2.d/S99${name}
michael@13	2866	) || exit $?
michael@13	2867	fi
michael@13	2868	;;
michael@13	2869	OSF1/V5.* )
michael@428	2870	if [ -f /sbin/init.d/${name_old} ]; then
michael@428	2871	rm -f /sbin/init.d/${name_old}
michael@428	2872	fi
michael@13	2873	if [ ! -f /sbin/init.d/${name} ]; then
michael@13	2874	# install transfer script
michael@13	2875	( echo "#!/bin/sh"
michael@13	2876	echo "##"
michael@13	2877	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@13	2878	echo "##"
michael@13	2879	echo ""
michael@428	2880	echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
michael@13	2881	echo "case \$1 in"
michael@428	2882	echo " start ) exec ${prefix}/bin/openpkg rc all start ;;"
michael@428	2883	echo " stop ) exec ${prefix}/bin/openpkg rc all stop ;;"
michael@13	2884	echo "esac"
michael@13	2885	) >/sbin/init.d/${name}
michael@13	2886	chmod 755 /sbin/init.d/${name}
michael@13	2887	# create corresponding symbolic links
michael@13	2888	( cd /sbin
michael@13	2889	ln -s ../init.d/${name} rc3.d/S99${name}
michael@13	2890	ln -s ../init.d/${name} rc0.d/K00${name}
michael@13	2891	) || exit $?
michael@13	2892	fi
michael@13	2893	;;
michael@13	2894	HP-UX/* )
michael@428	2895	if [ -f /sbin/init.d/${name_old} ]; then
michael@428	2896	rm -f /sbin/init.d/${name_old}
michael@428	2897	fi
michael@13	2898	if [ ! -f /sbin/init.d/${name} ]; then
michael@13	2899	# install transfer script
michael@13	2900	( echo "#!/bin/sh"
michael@13	2901	echo "##"
michael@13	2902	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@13	2903	echo "##"
michael@13	2904	echo ""
michael@428	2905	echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
michael@13	2906	echo "case \$1 in"
michael@428	2907	echo " start ) exec ${prefix}/bin/openpkg rc all start ;;"
michael@428	2908	echo " stop ) exec ${prefix}/bin/openpkg rc all stop ;;"
michael@13	2909	echo "esac"
michael@13	2910	) >/sbin/init.d/${name}
michael@13	2911	chmod 755 /sbin/init.d/${name}
michael@13	2912	# create corresponding symbolic links
michael@13	2913	( cd /sbin
michael@13	2914	ln -s ../init.d/${name} rc2.d/S900${name}
michael@13	2915	ln -s ../init.d/${name} rc1.d/K100${name}
michael@13	2916	) || exit $?
michael@13	2917	fi
michael@13	2918	;;
michael@13	2919	Darwin/* )
michael@428	2920	if [ -d /Library/StartupItems/${name_old} ]; then
michael@428	2921	rm -rf /Library/StartupItems/${name_old}
michael@428	2922	fi
michael@428	2923	darwin_rc_dir="/Library/StartupItems/${name}"
michael@13	2924	if [ ! -d ${darwin_rc_dir} ]; then
michael@428	2925	mkdir -p ${darwin_rc_dir}
michael@13	2926	fi
michael@13	2927
michael@13	2928	# make sure hierarchy is activated in /etc/hostconfig
michael@13	2929	# FIXME: cs: simple and bad code here without any detection of existing entries
michael@428	2930	darwin_rc_var="`echo ${name} | sed -e 's;-;_;g' | tr '[a-z]' '[A-Z]'`"
michael@428	2931	echo "${darwin_rc_var}=-YES-" >>/etc/hostconfig
michael@13	2932
michael@13	2933	# install transfer script
michael@13	2934	if [ ! -f ${darwin_rc_dir}/${name} ]; then
michael@13	2935	rm -f ${darwin_rc_dir}/${name} >/dev/null 2>&1
michael@13	2936	( echo "#!/bin/sh"
michael@13	2937	echo "##"
michael@13	2938	echo "## ${darwin_rc_dir}/${name}"
michael@428	2939	echo "## -- startup transfer script for OpenPKG ${prefix} hierarchy"
michael@13	2940	echo "##"
michael@13	2941	echo ""
michael@428	2942	echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
michael@13	2943	echo ""
michael@13	2944	echo ". /etc/rc.common"
michael@13	2945	echo ""
michael@428	2946	echo "if [ \"\${${darwin_rc_var}:=-NO-}\" = \"-YES-\" ]; then"
michael@13	2947	echo " ConsoleMessage \"OpenPKG ${prefix} hierarchy\""
michael@428	2948	echo " ${prefix}/bin/openpkg rc all start"
michael@13	2949	echo "fi"
michael@13	2950	) >${darwin_rc_dir}/${name}
michael@13	2951	chmod 755 ${darwin_rc_dir}/${name}
michael@13	2952	fi
michael@428	2953
michael@13	2954	# install startup parameter list
michael@13	2955	if [ ! -f ${darwin_rc_dir}/StartupParameters.plist ]; then
michael@13	2956	rm -f ${darwin_rc_dir}/StartupParameters.plist >/dev/null 2>&1
michael@13	2957	( echo "{"
michael@13	2958	echo " Description = \"OpenPKG ${prefix} hierarchy\";"
michael@13	2959	echo " Provides = (\"OpenPKG ${prefix}\");"
michael@13	2960	echo " Requires = (\"Disks\", \"Network Configuration\", \"Resolver\");"
michael@13	2961	echo " Uses = (\"Cron\");"
michael@13	2962	echo " OrderPreference = \"Last\";"
michael@13	2963	echo " Messages ="
michael@13	2964	echo " {"
michael@13	2965	echo " start = \"Starting OpenPKG ${prefix} hierarchy\";"
michael@13	2966	echo " stop = \"Stopping OpenPKG ${prefix} hierarchy\";"
michael@13	2967	echo " };"
michael@13	2968	echo "}"
michael@13	2969	) >${darwin_rc_dir}/StartupParameters.plist
michael@13	2970	chmod 644 ${darwin_rc_dir}/StartupParameters.plist
michael@13	2971	fi
michael@13	2972	;;
michael@13	2973	IRIX*/6.* )
michael@428	2974	if [ -f /etc/init.d/${name_old} ]; then
michael@428	2975	rm -f /etc/init.d/${name_old}
michael@428	2976	fi
michael@13	2977	if [ ! -f /etc/init.d/${name} ]; then
michael@13	2978	# install transfer script
michael@13	2979	( echo "#!/bin/sh"
michael@13	2980	echo "##"
michael@13	2981	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@13	2982	echo "##"
michael@13	2983	echo ""
michael@428	2984	echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
michael@13	2985	echo "case \$1 in"
michael@428	2986	echo " start ) exec ${prefix}/bin/openpkg rc all start ;;"
michael@428	2987	echo " stop ) exec ${prefix}/bin/openpkg rc all stop ;;"
michael@13	2988	echo "esac"
michael@13	2989	) >/etc/init.d/${name}
michael@13	2990	chmod 755 /etc/init.d/${name}
michael@13	2991	# create corresponding links
michael@13	2992	( cd /etc
michael@13	2993	ln -f init.d/${name} rc2.d/S99${name}
michael@13	2994	ln -f init.d/${name} rc0.d/K00${name}
michael@13	2995	) || exit $?
michael@13	2996	fi
michael@13	2997	;;
michael@428	2998	CYGWIN*/* )
michael@428	2999	if [ -f /etc/rc.d/init.d/${name_old} ]; then
michael@428	3000	rm -f /etc/rc.d/init.d/${name_old}
michael@428	3001	fi
michael@428	3002	if [ ! -f /etc/rc.d/init.d/${name} ]; then
michael@428	3003	# install transfer script
michael@428	3004	( echo "#!/bin/sh"
michael@428	3005	echo "##"
michael@428	3006	echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
michael@428	3007	echo "##"
michael@428	3008	echo ""
michael@428	3009	echo "test -f /etc/rc.d/init.d/functions && . /etc/rc.d/init.d/functions"
michael@428	3010	echo "test -f /etc/sysconfig/network && . /etc/sysconfig/network"
michael@428	3011	echo "[ ! -f ${prefix}/bin/openpkg ] && exit 0"
michael@428	3012	echo "case \$1 in"
michael@428	3013	echo " start ) exec ${prefix}/bin/openpkg rc all start ;;"
michael@428	3014	echo " stop ) exec ${prefix}/bin/openpkg rc all stop ;;"
michael@428	3015	echo "esac"
michael@428	3016	) >/etc/rc.d/init.d/${name}
michael@428	3017	chmod 755 /etc/rc.d/init.d/${name}
michael@428	3018	# create corresponding symbolic links
michael@428	3019	( cd /etc/rc.d
michael@428	3020	ln -s ../init.d/${name} rc2.d/S90${name}
michael@428	3021	ln -s ../init.d/${name} rc1.d/K10${name}
michael@428	3022	) || exit $?
michael@428	3023	fi
michael@428	3024	;;
michael@13	3025	esac
michael@13	3026	fi
michael@13	3027
michael@13	3028	# create the cron transfer entries
michael@13	3029	if [ ".$cusr" != ".root" ]; then
michael@13	3030	echo "openpkg:WARNING: skipping creation of system cron hooks" 1>&2
michael@13	3031	echo "openpkg:WARNING: (would require root-privileges)" 1>&2
michael@13	3032	else
michael@13	3033	case "$plid" in
michael@428	3034	FreeBSD/* | Linux/* )
michael@13	3035	if [ -f /etc/slackware-version ]; then
michael@428	3036	exists=`crontab -l | egrep "($prefix/bin/openpkg|$prefix/etc/rc)"`
michael@13	3037	if [ ".$exists" = . ]; then
michael@13	3038	EDITOR=/tmp/vipw.$$
michael@13	3039	VISUAL="$EDITOR"
michael@13	3040	export EDITOR
michael@13	3041	export VISUAL
michael@13	3042	( echo "#!/bin/sh"
michael@13	3043	echo "( echo \"# <OpenPKG prefix=$prefix pkg=openpkg>\""
michael@13	3044	echo " echo \"# chronological tasks of ${prefix} OpenPKG hierarchy\""
michael@428	3045	echo " echo \"0 0 1 * * [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron monthly\""
michael@428	3046	echo " echo \"0 0 * * 0 [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron weekly\""
michael@428	3047	echo " echo \"0 0 * * * [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron daily\""
michael@428	3048	echo " echo \"0 * * * * [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron hourly\""
michael@428	3049	echo " echo \"0,15,30,45 * * * * [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron quarterly\""
michael@13	3050	echo " echo \"# </OpenPKG>\""
michael@13	3051	echo ") >>\$1"
michael@13	3052	) >$EDITOR
michael@13	3053	chmod a+x $EDITOR
michael@13	3054	( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
michael@13	3055	rm -f $EDITOR
michael@13	3056	fi
michael@13	3057	else
michael@428	3058	exists=`egrep "($prefix/bin/openpkg|$prefix/etc/rc)" /etc/crontab`
michael@13	3059	if [ ".$exists" = . ]; then
michael@13	3060	( echo "# <OpenPKG prefix=$prefix pkg=openpkg>"
michael@13	3061	echo "# chronological tasks of ${prefix} OpenPKG hierarchy"
michael@428	3062	echo "0 0 1 * * root [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron monthly"
michael@428	3063	echo "0 0 * * 0 root [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron weekly"
michael@428	3064	echo "0 0 * * * root [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron daily"
michael@428	3065	echo "0 * * * * root [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron hourly"
michael@428	3066	echo "*/15 * * * * root [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron quarterly"
michael@13	3067	echo "# </OpenPKG>"
michael@13	3068	) >>/etc/crontab
michael@13	3069	fi
michael@13	3070	fi
michael@13	3071	;;
michael@428	3072	SunOS/5.* | OSF1/V5.* | NetBSD/* | HP-UX/* | UnixWare/* | AIX/* | CYGWIN*/* | Darwin/* )
michael@428	3073	exists=`crontab -l | egrep "($prefix/bin/openpkg|$prefix/etc/rc)"`
michael@13	3074	if [ ".$exists" = . ]; then
michael@13	3075	EDITOR=/tmp/vipw.$$
michael@13	3076	VISUAL="$EDITOR"
michael@13	3077	export EDITOR
michael@13	3078	export VISUAL
michael@13	3079	( echo "#!/bin/sh"
michael@13	3080	echo "( echo \"# <OpenPKG prefix=$prefix pkg=openpkg>\""
michael@13	3081	echo " echo \"# chronological tasks of ${prefix} OpenPKG hierarchy\""
michael@461	3082	echo " echo \"0 0 1 * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc cron monthly\""
michael@461	3083	echo " echo \"0 0 * * 0 [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc cron weekly\""
michael@461	3084	echo " echo \"0 0 * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc cron daily\""
michael@461	3085	echo " echo \"0 * * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc cron hourly\""
michael@461	3086	echo " echo \"0,15,30,45 * * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc cron quarterly\""
michael@13	3087	echo " echo \"# </OpenPKG>\""
michael@13	3088	echo ") >>\$1"
michael@13	3089	) >$EDITOR
michael@13	3090	chmod a+x $EDITOR
michael@13	3091	( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
michael@13	3092	rm -f $EDITOR
michael@13	3093	fi
michael@13	3094	;;
michael@13	3095	IRIX*/6.* )
michael@428	3096	exists=`crontab -l | egrep "($prefix/bin/openpkg|$prefix/etc/rc)"`
michael@13	3097	if [ ".$exists" = . ]; then
michael@13	3098	( crontab -l
michael@13	3099	echo "# <OpenPKG prefix=$prefix pkg=openpkg>"
michael@13	3100	echo "# chronological tasks of ${prefix} OpenPKG hierarchy"
michael@428	3101	echo "0 0 1 * * [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron monthly"
michael@428	3102	echo "0 0 * * 0 [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron weekly"
michael@428	3103	echo "0 0 * * * [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron daily"
michael@428	3104	echo "0 * * * * [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron hourly"
michael@428	3105	echo "0,15,30,45 * * * * [ -f ${prefix}/bin/openpkg ] && ${prefix}/bin/openpkg rc cron quarterly"
michael@13	3106	echo "# </OpenPKG>"
michael@13	3107	) | /usr/bin/crontab || exit $?
michael@13	3108	fi
michael@13	3109	;;
michael@13	3110	esac
michael@13	3111	fi
michael@13	3112
michael@13	3113	# remember what OpenPKG RPM version was installed, so we can
michael@13	3114	# correctly upgrade the RPM database in the %post section (see below).
michael@13	3115	if [ -d ${prefix}/RPM/DB ]; then
michael@13	3116	if [ -x "${prefix}/bin/openpkg" -a -x "${prefix}/libexec/openpkg/rpm" ]; then
michael@428	3117	# OpenPKG >= 2.0
michael@13	3118	rpm="${prefix}/bin/openpkg rpm"
michael@13	3119	else
michael@13	3120	# OpenPKG 1.x
michael@13	3121	rpm="${prefix}/bin/rpm"
michael@13	3122	fi
michael@13	3123	rm -f ${prefix}/RPM/DB/.version >/dev/null 2>&1 || true
michael@428	3124	$rpm --version 2>/dev/null |\
michael@13	3125	sed -e 's;^;X;' \
michael@13	3126	-e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*$;\1;' \
michael@13	3127	-e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\).*$;\1;' \
michael@428	3128	-e 's;^X.*$;0.0;' \
michael@13	3129	>${prefix}/RPM/DB/.version
michael@13	3130	fi
michael@13	3131
michael@13	3132	%post
michael@570	3133	# optional postprocessing from "pre" section
michael@13	3134	if [ -f %{l_prefix}.pre-post-process.sh ]; then
michael@13	3135	sh %{l_prefix}.pre-post-process.sh
michael@13	3136	rm -f %{l_prefix}.pre-post-process.sh
michael@13	3137	fi
michael@13	3138
michael@13	3139	# update or initially create OpenPKG UUID configuration
michael@13	3140	%{l_prefix}/bin/openpkg uuid update >/dev/null 2>&1 || true
michael@13	3141
michael@428	3142	# when upgrading from RPM 4 to RPM 5 there will be no
michael@428	3143	# initial license at all, so create one
michael@428	3144	if [ ! -f %{l_prefix}/etc/openpkg/license ]; then
michael@428	3145	echo "BOOT" >%{l_prefix}/etc/openpkg/license
michael@428	3146	( chown %{l_musr}:%{l_mgrp} %{l_prefix}/etc/openpkg/license
michael@428	3147	chmod 644 %{l_prefix}/etc/openpkg/license
michael@428	3148	) >/dev/null 2>&1 || true
michael@428	3149	fi
michael@428	3150
michael@428	3151	# finally switch from a possibly active BOOT license to EVAL license
michael@428	3152	# (notice: this is really the earliest time we can switch because the
michael@428	3153	# previous command had to create the <prefix>/etc/openpkg/uuid first!)
michael@428	3154	if [ ".`cat %{l_prefix}/etc/openpkg/license`" = ".BOOT" ]; then
michael@428	3155	echo "EVAL" >%{l_prefix}/etc/openpkg/license
michael@428	3156	fi
michael@428	3157
michael@13	3158	# determine new and old OpenPKG RPM version
michael@428	3159	V_rpm_new="%{V_rpm_major}.%{V_rpm_minor}"
michael@13	3160	if [ -f %{l_prefix}/RPM/DB/.version ]; then
michael@13	3161	V_rpm_old="`cat %{l_prefix}/RPM/DB/.version`"
michael@13	3162	rm -f %{l_prefix}/RPM/DB/.version >/dev/null 2>&1 || true
michael@13	3163	else
michael@428	3164	V_rpm_old="0.0"
michael@13	3165	fi
michael@13	3166
michael@13	3167	# make sure all RPM database files are present and that their
michael@13	3168	# attributes are correct, etc. This is not a database rebuild
michael@13	3169	# operation, so this is fully harmless and can be done always.
michael@428	3170	%{l_prefix}/lib/openpkg/rpmdb --quiet --fixate >/dev/null 2>&1 || true
michael@13	3171
michael@13	3172	# check RPM database for upgrade requirements
michael@13	3173	if [ ".$1" = .2 -a ".$V_rpm_old" != ".$V_rpm_new" ]; then
michael@13	3174	# RPM 4.0/4.1 does not allow concurrent database access, so we
michael@13	3175	# cannot upgrade the database immediately from here (because
michael@13	3176	# we are still running within the execution context of the
michael@13	3177	# old RPM which in turn has the database locked) and instead
michael@13	3178	# have to just drop a note to the administrator about database
michael@428	3179	# upgrading. RPM >= 4.2 in general allows concurrent database
michael@13	3180	# access, but the whole stuff is too risky here, too.
michael@13	3181	( echo "You are upgrading the OpenPKG bootstrap from a previous"
michael@13	3182	echo "RPM $V_rpm_old based version to this RPM $V_rpm_new based"
michael@428	3183	echo "version. The RPM database in %{l_prefix}/RPM/DB/ can be"
michael@428	3184	echo "reused, but you first have to upgrade it as soon as"
michael@428	3185	echo "possible to the latest format files by executing:"
michael@13	3186	echo " \$ %{l_prefix}/bin/openpkg rpm --db-rebuild"
michael@13	3187	echo "In case of problems with the RPM database you can always"
michael@13	3188	echo "execute the command:"
michael@13	3189	echo " \$ %{l_prefix}/bin/openpkg rpm --db-cleanup"
michael@13	3190	) | %{l_prefix}/lib/openpkg/rpmtool msg -b -t warn
michael@13	3191	fi
michael@13	3192
michael@13	3193	# system command overriding support
michael@13	3194	# ATTENTION: THIS BETTER SHOULD BE REPLACED WITH A MORE GENERIC
michael@13	3195	# BUILD COMMAND OVERRIDE SOLUTION!
michael@13	3196	if [ ! -d %{l_prefix}/lib/openpkg/override ]; then
michael@13	3197	mkdir %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
michael@13	3198	fi
michael@13	3199	chown %{l_musr}:%{l_mgrp} %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
michael@13	3200	case "`cat %{l_prefix}/etc/openpkg/platform`" in
michael@13	3201	*-*-debian* | *-*-ubuntu* )
michael@13	3202	# FIXME: Evil hack to workaround build problems under Debian
michael@13	3203	# (at least 3.1) (and similar platforms) where a Debian
michael@13	3204	# install-info(8) exists which is both API and functionally
michael@13	3205	# incompatible to the de-facto standardized install-info(8)
michael@13	3206	# command from GNU Texinfo.
michael@13	3207	if [ ! -f %{l_prefix}/lib/openpkg/override/install-info ]; then
michael@13	3208	( echo "#!/bin/sh"
michael@13	3209	echo "echo 'OpenPKG: NOTICE: install-info(8) command execution overridden'"
michael@13	3210	echo "exit 0"
michael@13	3211	) >%{l_prefix}/lib/openpkg/override/install-info
michael@13	3212	chmod 775 %{l_prefix}/lib/openpkg/override/install-info
michael@13	3213	fi
michael@13	3214	;;
michael@13	3215	*-*-macosx* | *-*-darwin* )
michael@13	3216	# FIXME: Evil hack to workaround the fact that Mac OS X'
michael@13	3217	# linker by default prefers the /usr/lib libraries and does
michael@13	3218	# not honor the -L options the way one would expect it.
michael@13	3219	gcc="`%{l_prefix}/lib/openpkg/shtool path gcc`"
michael@13	3220	cc="`%{l_prefix}/lib/openpkg/shtool path cc`"
michael@13	3221	ld="`%{l_prefix}/lib/openpkg/shtool path ld`"
michael@13	3222	if [ ".$gcc" != . -a ! -f %{l_prefix}/lib/openpkg/override/gcc ]; then
michael@13	3223	( echo "#!/bin/sh"
michael@13	3224	echo "case \" \$* \" in"
michael@13	3225	echo " *\" -c \"* | *\" -E \"* ) exec $gcc \"\$@\" ;;"
michael@13	3226	echo " * ) exec $gcc -Wl,-search_paths_first \"\$@\" ;;"
michael@13	3227	echo "esac"
michael@13	3228	) >%{l_prefix}/lib/openpkg/override/gcc
michael@13	3229	chmod 775 %{l_prefix}/lib/openpkg/override/gcc
michael@13	3230	fi
michael@13	3231	if [ ".$cc" != . -a ! -f %{l_prefix}/lib/openpkg/override/cc ]; then
michael@13	3232	( echo "#!/bin/sh"
michael@13	3233	echo "case \" \$* \" in"
michael@13	3234	echo " *\" -c \"* | *\" -E \"* ) exec $gcc \"\$@\" ;;"
michael@13	3235	echo " * ) exec $cc -Wl,-search_paths_first \"\$@\" ;;"
michael@13	3236	echo "esac"
michael@13	3237	) >%{l_prefix}/lib/openpkg/override/cc
michael@13	3238	chmod 775 %{l_prefix}/lib/openpkg/override/cc
michael@13	3239	fi
michael@13	3240	if [ ".$ld" != . -a ! -f %{l_prefix}/lib/openpkg/override/ld ]; then
michael@13	3241	( echo "#!/bin/sh"
michael@13	3242	echo "exec $ld -search_paths_first \"\$@\""
michael@13	3243	) >%{l_prefix}/lib/openpkg/override/ld
michael@13	3244	chmod 775 %{l_prefix}/lib/openpkg/override/ld
michael@13	3245	fi
michael@13	3246	;;
michael@13	3247	esac
michael@13	3248
michael@428	3249	# special support for fully unprivileged environments
michael@428	3250	# where we cannot switch the user at all with su(1),
michael@428	3251	# so we provide a dummy su(1) override command.
michael@428	3252	if [ ".%{l_unprivileged}" = ".yes" ]; then
michael@428	3253	( echo "#!/bin/sh"
michael@428	3254	echo "while [ \$# -gt 0 ]; do"
michael@428	3255	echo " case \"\$1\" in"
michael@428	3256	echo " - | -* ) shift ;;"
michael@428	3257	echo " * ) shift; break ;;"
michael@428	3258	echo " esac"
michael@428	3259	echo "done"
michael@428	3260	echo "exec /bin/sh \${1+\"\$@\"}"
michael@428	3261	) >%{l_prefix}/lib/openpkg/override/su
michael@428	3262	chmod 775 %{l_prefix}/lib/openpkg/override/su
michael@428	3263	fi
michael@428	3264
michael@13	3265	# FIXME: hack to workaround problems in environments with too few
michael@13	3266	# development tools. ATTENTION: see one paragraph above.
michael@13	3267	if [ ! -d %{l_prefix}/lib/openpkg/fallback ]; then
michael@13	3268	mkdir %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
michael@13	3269	fi
michael@13	3270	chown %{l_musr}:%{l_mgrp} %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
michael@13	3271
michael@428	3272	# cruel platform hack
michael@428	3273	case "`cat %{l_prefix}/etc/openpkg/platform`" in
michael@428	3274	*-*-cygwin* )
michael@428	3275	# Cygwin under Windows Vista dislikes executables with
michael@428	3276	# "patch" in the same and would require a "*.manifest"
michael@428	3277	# file applied with the "mt.exe" from the "Windows
michael@428	3278	# Software Development Kit (SDK)" in order to escape from
michael@428	3279	# UAC. An easy alternative is to just rename the file to a
michael@428	3280	# different name.
michael@428	3281	cp %{l_prefix}/lib/openpkg/patch \
michael@428	3282	%{l_prefix}/lib/openpkg/pitch
michael@428	3283	%{l_prefix}/lib/openpkg/shtool subst \
michael@428	3284	-e 's;openpkg/patch;openpkg/pitch;g' \
michael@428	3285	%{l_prefix}/etc/openpkg/rpmmacros
michael@428	3286	;;
michael@428	3287	esac
michael@428	3288
michael@428	3289	# print license
michael@428	3290	( echo ""
michael@428	3291	echo "NOTICE: Proprietary components of the OpenPKG Framework are covered"
michael@428	3292	echo "by the following terms and conditions and require a valid run-time"
michael@428	3293	echo "license, issued by the OpenPKG GmbH. An initial license, which allows"
michael@428	3294	echo "30 days of free use for evaluation purposes, is already pre-installed."
michael@428	3295	echo "Please go to http://openpkg.com/go/framework-license to obtain"
michael@428	3296	echo "your permanent license."
michael@428	3297	echo ""
michael@428	3298	%{l_prefix}/bin/openpkg --license
michael@428	3299	echo "______________________________________________________________________________"
michael@428	3300	echo ""
michael@428	3301	echo "NOTICE: Open Source components of the OpenPKG Framework are covered"
michael@428	3302	echo "by various standard Open Source distribution licenses, including"
michael@428	3303	echo "the MIT, BSD, LGPL, GPL, Public-Domain and Artistic licenses."
michael@428	3304	echo "They all allow you the use of those components free of charge."
michael@428	3305	echo "See http://www.opensource.org/licenses for more details."
michael@428	3306	echo ""
michael@428	3307	) | %{l_prefix}/lib/openpkg/rpmtool msg -b -t notice
michael@428	3308
michael@428	3309	# register package with central OpenPKG registry
michael@428	3310	( nohup %{l_prefix}/bin/openpkg register \
michael@428	3311	</dev/null >/dev/null 2>&1 &
michael@428	3312	) </dev/null >/dev/null 2>&1 || true
michael@13	3313
michael@13	3314	%preun
michael@13	3315	[ ".$1" != .0 ] && exit 0
michael@13	3316
michael@13	3317	# remove override files
michael@13	3318	if [ -d %{l_prefix}/lib/openpkg/override ]; then
michael@13	3319	rm -rf %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
michael@13	3320	fi
michael@13	3321
michael@13	3322	# remove fallback files
michael@13	3323	if [ -d %{l_prefix}/lib/openpkg/fallback ]; then
michael@13	3324	rm -rf %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
michael@13	3325	fi
michael@13	3326
michael@13	3327	# remove files which are not RPM controlled
michael@13	3328	rm -rf %{l_prefix}/RPM/TMP/* %{l_prefix}/RPM/TMP/.[a-z]* >/dev/null 2>&1 || true
michael@13	3329	rm -rf %{l_prefix}/RPM/SRC/* %{l_prefix}/RPM/SRC/.[a-z]* >/dev/null 2>&1 || true
michael@13	3330	rm -rf %{l_prefix}/RPM/PKG/* %{l_prefix}/RPM/PKG/.[a-z]* >/dev/null 2>&1 || true
michael@428	3331	rm -rf %{l_prefix}/RPM/TR/* %{l_prefix}/RPM/TR/.[a-z]* >/dev/null 2>&1 || true
michael@13	3332	rm -rf %{l_prefix}/RPM/DB/* %{l_prefix}/RPM/DB/.[a-z]* >/dev/null 2>&1 || true
michael@13	3333
michael@13	3334	# The following code usually would be done in a %postun section.
michael@13	3335	# But because we already had to remove the database in this %preun
michael@13	3336	# section (see the 'rm' commands above) in order to make RPM happy
michael@13	3337	# inside its own removal procedure, RPM would no longer find the
michael@13	3338	# %postun script (because it's recorded in the database files). So
michael@13	3339	# we have to perform the procedure already in this %preun script.
michael@13	3340	# except for the removal of the top-level directory it does not
michael@13	3341	# matter. But the top-level directory can only be removed after
michael@13	3342	# the RPM removal procedure took place, so we play a little delay
michael@13	3343	# trick below.
michael@13	3344
michael@13	3345	# determine current user
michael@13	3346	cusr=`(id -un) 2>/dev/null ||\
michael@13	3347	(id | sed -e 's;^[^(]*(\([^)]*\)).*;\1;') 2>/dev/null ||\
michael@13	3348	(whoami) 2>/dev/null ||\
michael@13	3349	(who am i | cut "-d " -f1) 2>/dev/null ||\
michael@13	3350	echo $LOGNAME`
michael@13	3351
michael@13	3352	# determine runtime details (for both inside and outside RPM!!)
michael@13	3353	user="%{l_musr}"
michael@13	3354	group="%{l_mgrp}"
michael@13	3355	prefix="%{l_prefix}"
michael@13	3356	prefix=`echo "$prefix" | sed -e 's;//*;/;g' -e 's;/$;;'`
michael@13	3357
michael@13	3358	# determine platform id
michael@13	3359	s=`(uname -s) 2>/dev/null` || s='Unknown'
michael@13	3360	r=`(uname -r) 2>/dev/null` || r='0.0'
michael@13	3361	plid="${s}/${r}"
michael@13	3362
michael@13	3363	# unregister instance in presence file
michael@13	3364	presence="/etc/openpkg"
michael@13	3365	exists=`cat $presence 2>/dev/null | egrep "^ *${prefix} *\$"`
michael@13	3366	if [ ".$exists" != . ]; then
michael@13	3367	if [ ".$cusr" != ".root" ]; then
michael@13	3368	echo "openpkg:WARNING: skipping unregistering of $prefix in $presence" 1>&2
michael@13	3369	echo "openpkg:WARNING: (would require root-privileges)" 1>&2
michael@13	3370	else
michael@13	3371	cp $presence $presence.bak && \
michael@13	3372	egrep -v "^ *${prefix} *\$" $presence.bak >$presence
michael@13	3373	rm -f $presence.bak >/dev/null 2>&1
michael@13	3374	if [ ".`cat $presence`" = . ]; then
michael@13	3375	rm -f $presence >/dev/null 2>&1
michael@13	3376	fi
michael@13	3377	fi
michael@13	3378	fi
michael@13	3379
michael@13	3380	# remove entry in /etc/shells
michael@13	3381	shell="${prefix}/lib/openpkg/bash"
michael@13	3382	exists=`cat /etc/shells 2>/dev/null | grep "^$shell"`
michael@13	3383	if [ ".$exists" != . ]; then
michael@13	3384	if [ ".$cusr" != ".root" ]; then
michael@13	3385	echo "openpkg:WARNING: skipping deletion of $shell from /etc/shells" 1>&2
michael@13	3386	echo "openpkg:WARNING: (would require root-privileges)" 1>&2
michael@13	3387	else
michael@13	3388	cp /etc/shells /etc/shells.bak && \
michael@13	3389	grep -v "^${shell}" /etc/shells.bak >/etc/shells
michael@13	3390	rm -f /etc/shells.bak >/dev/null 2>&1
michael@13	3391	fi
michael@13	3392	fi
michael@13	3393
michael@13	3394	# remove the hierarchy user/group
michael@13	3395	for req in "super-user:%{l_susr}:%{l_suid}:%{l_sgrp}:%{l_sgid}" \
michael@13	3396	"management:%{l_musr}:%{l_muid}:%{l_mgrp}:%{l_mgid}" \
michael@13	3397	"restricted:%{l_rusr}:%{l_ruid}:%{l_rgrp}:%{l_rgid}" \
michael@13	3398	"non-privileged:%{l_nusr}:%{l_nuid}:%{l_ngrp}:%{l_ngid}"; do
michael@13	3399	# split request into class/usr/uid/grp/gid
michael@13	3400	OIFS="$IFS"; IFS=":"; set -- $req; IFS="$OIFS"
michael@13	3401	class="$1"; usr="$2"; uid="$3"; grp="$4"; gid="$5"
michael@13	3402
michael@13	3403	# check whether user already exists
michael@13	3404	exists=`(getent passwd "$usr"; \
michael@13	3405	grep "^$usr:" /etc/passwd; \
michael@13	3406	ypmatch "$usr" passwd; \
michael@13	3407	nismatch "$usr" passwd; \
michael@428	3408	nidump passwd . | grep "^$usr:"; \
michael@428	3409	dscl . -read "/users/$usr" | grep RecordName) 2>/dev/null | \
michael@13	3410	sed -e 'q'`
michael@13	3411	if [ ".$exists" != . ]; then
michael@13	3412	if [ ".$cusr" != ".root" ]; then
michael@13	3413	echo "openpkg:WARNING: skipping deletion of OpenPKG $class user $usr" 1>&2
michael@13	3414	echo "openpkg:WARNING: (would require root-privileges)" 1>&2
michael@13	3415	elif [ ".$usr" = ".root" ]; then
michael@13	3416	echo "openpkg:WARNING: skipping deletion of OpenPKG $class user $usr" 1>&2
michael@13	3417	echo "openpkg:WARNING: (would remove system standard user)" 1>&2
michael@13	3418	else
michael@13	3419	case "$plid" in
michael@13	3420	FreeBSD/* | NetBSD/* )
michael@13	3421	cp /etc/master.passwd /etc/master.passwd.bak && \
michael@13	3422	grep -v "^${usr}:" /etc/master.passwd.bak >/etc/master.passwd
michael@13	3423	( PATH="$PATH:/usr/sbin"; pwd_mkdb -p /etc/master.passwd ) || exit $?
michael@13	3424	rm -f /etc/master.passwd.bak >/dev/null 2>&1
michael@13	3425	;;
michael@13	3426	Linux/* | SunOS/5.* | UnixWare/* )
michael@13	3427	cp /etc/passwd /etc/passwd.bak && \
michael@13	3428	grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
michael@13	3429	( PATH="$PATH:/usr/sbin"; pwconv ) || exit $?
michael@13	3430	rm -f /etc/passwd.bak >/dev/null 2>&1
michael@13	3431	;;
michael@13	3432	AIX/* )
michael@13	3433	rmuser -p "${usr}"
michael@13	3434	cp /etc/security/login.cfg /etc/security/login.cfg.bak && \
michael@13	3435	sed -e "/^usw:/,/^[^ ]/s;\\( *shells =.*\\),$shell\\(.*\\)\$;\\1\\2;" \
michael@13	3436	</etc/security/login.cfg.bak >/etc/security/login.cfg && \
michael@13	3437	rm -f /etc/security/login.cfg.bak >/dev/null 2>&1
michael@13	3438	;;
michael@13	3439	OSF1/V5.* )
michael@13	3440	cp /etc/passwd /etc/passwd.bak && \
michael@13	3441	grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
michael@13	3442	( PATH="$PATH:/usr/sbin"; mkpasswd /etc/passwd ) || exit $?
michael@13	3443	rm -f /etc/passwd.bak >/dev/null 2>&1
michael@13	3444	;;
michael@13	3445	HP-UX/* )
michael@13	3446	cp /etc/passwd /etc/passwd.bak && \
michael@13	3447	grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
michael@13	3448	rm -f /etc/passwd.bak >/dev/null 2>&1
michael@13	3449	;;
michael@428	3450	Darwin/10.[1-9]* | Darwin/1[1-9].* )
michael@428	3451	dscl . -delete "/users/${usr}"
michael@428	3452	;;
michael@13	3453	Darwin/* )
michael@13	3454	niutil -destroy . "/users/${usr}"
michael@13	3455	;;
michael@13	3456	IRIX*/6.* )
michael@13	3457	cp /etc/passwd /etc/passwd.bak && \
michael@13	3458	grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
michael@13	3459	if [ -f /etc/shadow ]
michael@13	3460	then ( PATH="$PATH:/usr/sbin"; pwconv ) || exit $?
michael@13	3461	fi
michael@13	3462	rm -f /etc/passwd.bak >/dev/null 2>&1
michael@13	3463	;;
michael@428	3464	CYGWIN*/* )
michael@428	3465	cp /etc/passwd /etc/passwd.bak && \
michael@428	3466	grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
michael@428	3467	rm -f /etc/passwd.bak >/dev/null 2>&1
michael@428	3468	;;
michael@13	3469	esac
michael@13	3470	fi
michael@13	3471	fi
michael@13	3472
michael@13	3473	# check whether group already exists
michael@13	3474	exists=`(getent group "$grp"; \
michael@13	3475	grep "^$grp:" /etc/group; \
michael@13	3476	ypmatch "$grp" group; \
michael@13	3477	nismatch "$grp" group; \
michael@428	3478	nidump group . | grep "^$grp:"; \
michael@428	3479	dscl . -read "/groups/$grp" | grep RecordName) 2>/dev/null | \
michael@13	3480	sed -e 'q'`
michael@13	3481	if [ ".$exists" != . ]; then
michael@13	3482	if [ ".$cusr" != ".root" ]; then
michael@13	3483	echo "openpkg:WARNING: skipping deletion of OpenPKG $class group $grp" 1>&2
michael@13	3484	echo "openpkg:WARNING: (would require root-privileges)" 1>&2
michael@13	3485	elif [ ".$usr" = ".root" ] || [ ".$grp" = ".root" ] || [ ".$grp" = ".wheel" ]; then
michael@13	3486	echo "openpkg:WARNING: skipping deletion of OpenPKG $class group $grp" 1>&2
michael@13	3487	echo "openpkg:WARNING: (would remove system standard group)" 1>&2
michael@13	3488	else
michael@13	3489	case "$plid" in
michael@428	3490	Darwin/10.[1-9]* | Darwin/1[1-9].* )
michael@428	3491	dscl . -delete "/groups/${grp}"
michael@428	3492	;;
michael@13	3493	Darwin/* )
michael@13	3494	niutil -destroy . "/groups/${grp}"
michael@13	3495	;;
michael@13	3496	AIX/* )
michael@13	3497	rmgroup "${grp}"
michael@13	3498	;;
michael@13	3499	* )
michael@13	3500	cp /etc/group /etc/group.bak && \
michael@13	3501	grep -v "^${grp}:" /etc/group.bak >/etc/group
michael@13	3502	rm -f /etc/group.bak >/dev/null 2>&1
michael@13	3503	;;
michael@13	3504	esac
michael@13	3505	fi
michael@13	3506	fi
michael@13	3507	done
michael@13	3508
michael@13	3509	# invalidate passwd and group tables from Name Service Cache Daemon to
michael@13	3510	# ensure chown/chgrp works immediately after pwconv on Linux and Solaris
michael@13	3511	if [ -x /usr/sbin/nscd ]; then
michael@13	3512	/usr/sbin/nscd -i passwd >/dev/null 2>&1 || true
michael@13	3513	/usr/sbin/nscd -i group >/dev/null 2>&1 || true
michael@13	3514	fi
michael@13	3515
michael@13	3516	# remove the startup/shutdown transfer scripts
michael@443	3517	name="openpkg-`echo "$prefix" | sed -e 's;[^a-zA-Z0-9];;g'`"
michael@13	3518	if [ ".$cusr" != ".root" ]; then
michael@444	3519	echo "openpkg:WARNING: skipping deletion of system runcommand hooks" 1>&2
michael@444	3520	echo "openpkg:WARNING: (would require root privileges)" 1>&2
michael@13	3521	else
michael@13	3522	case "$plid" in
michael@13	3523	FreeBSD/* )
michael@428	3524	rm -f /etc/rc.d/${name} >/dev/null 2>&1
michael@13	3525	;;
michael@13	3526	NetBSD/* )
michael@13	3527	rm -f /etc/rc.d/${name} >/dev/null 2>&1
michael@13	3528	;;
michael@13	3529	Linux/* )
michael@13	3530	if [ -f /etc/gentoo-release ]; then
michael@428	3531	/sbin/rc-update del ${name} >/dev/null 2>&1
michael@428	3532	rm -f /etc/init.d/${name} >/dev/null 2>&1
michael@428	3533	elif [ -f /etc/redhat-release ]; then
michael@428	3534	/sbin/chkconfig ${name} off >/dev/null 2>&1
michael@428	3535	/sbin/chkconfig --del ${name} >/dev/null 2>&1
michael@428	3536	rm -f /etc/rc.d/init.d/${name} >/dev/null 2>&1
michael@13	3537	else
michael@13	3538	# sroot: script root directory
michael@13	3539	# lroot: link root directory
michael@13	3540	if [ -f /etc/debian_version ]; then
michael@13	3541	sroot=/etc/init.d
michael@428	3542	lroot=/etc/rc%%d.d
michael@428	3543	elif [ -f /etc/mandrake-release ]; then
michael@13	3544	sroot=/etc/rc.d/init.d
michael@428	3545	lroot=/etc/rc.d/rc%%d.d
michael@13	3546	elif [ -f /etc/SuSE-release ]; then
michael@13	3547	sroot=/etc/init.d
michael@428	3548	lroot=/etc/init.d/rc%%d.d
michael@13	3549	elif [ -f /etc/slackware-version ]; then
michael@13	3550	sroot=/etc/rc.d
michael@428	3551	lroot=/etc/rc.d/rc%%d.d
michael@13	3552	name="rc.${name}"
michael@13	3553	else
michael@13	3554	echo "WARNING: you are not running one of the supported standard" 1>&2
michael@13	3555	echo "WARNING: Linux platforms (Debian, RedHat, Mandrake, SuSE, Gentoo)." 1>&2
michael@13	3556	echo "WARNING: Guessing the location of the system init scripts!" 1>&2
michael@13	3557	sroot=""
michael@13	3558	lroot=""
michael@13	3559	for sr in /etc/rc.d/init.d /etc/init.d /sbin/init.d; do
michael@13	3560	if [ -d $sr ]; then
michael@13	3561	sroot="$sr"
michael@13	3562	break
michael@13	3563	fi
michael@13	3564	done
michael@13	3565	for lr in /etc/rc.d/rc2.d /etc/rc2.d /sbin/init.d/rc2.d; do
michael@13	3566	if [ -d $lr ]; then
michael@428	3567	lroot="`echo $lr | sed -e 's;2;%%d;'`"
michael@13	3568	break
michael@13	3569	fi
michael@13	3570	done
michael@13	3571	if [ ".$sroot" = . -o ".$lroot" = . ]; then
michael@13	3572	echo "ERROR: Failed to guess the location of the system init scripts!" 1>&2
michael@13	3573	exit 1
michael@13	3574	fi
michael@13	3575	fi
michael@13	3576	rm -f ${sroot}/${name} >/dev/null 2>&1
michael@13	3577	for i in 2 3 4 5; do
michael@428	3578	rm -f `echo $lroot | sed -e "s;%%d;$i;"`/S99${name} >/dev/null 2>&1
michael@13	3579	done
michael@13	3580	for i in 0 1 6; do
michael@428	3581	rm -f `echo $lroot | sed -e "s;%%d;$i;"`/K00${name} >/dev/null 2>&1
michael@13	3582	done
michael@13	3583	if [ -f /etc/slackware-version ]; then
michael@13	3584	for i in 0 1 2 3 4 5 6; do
michael@428	3585	l=`echo $lroot | sed -e "s;%%d;$i;"`
michael@13	3586	if [ -d $l ]; then
michael@13	3587	rmdir $l >/dev/null 2>&1 || true
michael@13	3588	fi
michael@13	3589	done
michael@13	3590	fi
michael@13	3591	fi
michael@13	3592	;;
michael@437	3593	SunOS/5.1* )
michael@443	3594	suname="`echo "$prefix" | sed -e 's;[^a-zA-Z0-9];;g'`"
michael@449	3595	svcdir=/`[ -d /lib/svc/manifest ] && echo lib || echo var`
michael@449	3596	/usr/sbin/svcadm disable svc:/openpkg/${suname}:default; sleep 2
michael@449	3597	rm -f /${svcdir}/svc/manifest/openpkg/${suname}.xml >/dev/null 2>&1
michael@449	3598	rmdir /${svcdir}/svc/manifest/openpkg >/dev/null 2>&1 || true
michael@449	3599	/usr/sbin/svcadm restart svc:/system/manifest-import
michael@437	3600	;;
michael@13	3601	SunOS/5.* )
michael@13	3602	rm -f /etc/init.d/${name} >/dev/null 2>&1
michael@13	3603	rm -f /etc/rc3.d/S99${name} >/dev/null 2>&1
michael@13	3604	rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
michael@13	3605	rm -f /etc/rc1.d/K00${name} >/dev/null 2>&1
michael@13	3606	;;
michael@13	3607	UnixWare/* )
michael@13	3608	rm -f /etc/init.d/${name} >/dev/null 2>&1
michael@13	3609	rm -f /etc/rc2.d/S99${name} >/dev/null 2>&1
michael@13	3610	rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
michael@13	3611	rm -f /etc/rc1.d/K00${name} >/dev/null 2>&1
michael@13	3612	;;
michael@13	3613	AIX/* )
michael@13	3614	rm -f /etc/rc.d/init.d/${name} >/dev/null 2>&1
michael@13	3615	rm -f /etc/rc.d/rc2.d/S99${name} >/dev/null 2>&1
michael@13	3616	;;
michael@13	3617	OSF1/V5.* )
michael@13	3618	rm -f /sbin/init.d/${name} >/dev/null 2>&1
michael@13	3619	rm -f /sbin/rc3.d/S99${name} >/dev/null 2>&1
michael@13	3620	rm -f /sbin/rc0.d/K00${name} >/dev/null 2>&1
michael@13	3621	;;
michael@13	3622	HP-UX/* )
michael@13	3623	rm -f /sbin/init.d/${name} >/dev/null 2>&1
michael@13	3624	rm -f /etc/rc2.d/S900${name} >/dev/null 2>&1
michael@13	3625	rm -f /etc/rc1.d/K100${name} >/dev/null 2>&1
michael@13	3626	;;
michael@13	3627	Darwin/* )
michael@428	3628	darwin_rc_var="`echo ${name} | sed -e 's;-;_;g' | tr '[a-z]' '[A-Z]'`"
michael@13	3629	cp /etc/hostconfig /etc/hostconfig.bak && \
michael@428	3630	grep -v "^${darwin_rc_var}=" /etc/hostconfig.bak >/etc/hostconfig
michael@13	3631	rm -f /etc/hostconfig.bak >/dev/null 2>&1
michael@428	3632	rm -rf /Library/StartupItems/${name} >/dev/null 2>&1
michael@13	3633	;;
michael@13	3634	IRIX*/6.* )
michael@13	3635	rm -f /etc/init.d/${name} >/dev/null 2>&1
michael@13	3636	rm -f /etc/rc2.d/S99${name} >/dev/null 2>&1
michael@13	3637	rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
michael@13	3638	;;
michael@428	3639	CYGWIN*/* )
michael@428	3640	rm -f /etc/rc.d/init.d/${name} >/dev/null 2>&1
michael@428	3641	rm -f /etc/rc.d/rc2.d/S90${name} >/dev/null 2>&1
michael@428	3642	rm -f /etc/rc.d/rc1.d/K10${name} >/dev/null 2>&1
michael@428	3643	;;
michael@13	3644	esac
michael@13	3645	fi
michael@13	3646
michael@13	3647	# remove the cron transfer entries
michael@13	3648	if [ ".$cusr" != ".root" ]; then
michael@13	3649	echo "openpkg:WARNING: skipping deletion of system cron hooks" 1>&2
michael@13	3650	echo "openpkg:WARNING: (would require root-privileges)" 1>&2
michael@13	3651	else
michael@13	3652	case "$plid" in
michael@428	3653	FreeBSD/* | Linux/* )
michael@13	3654	if [ -f /etc/slackware-version ]; then
michael@13	3655	EDITOR=/tmp/vipw.$$
michael@13	3656	VISUAL="$EDITOR"
michael@13	3657	export EDITOR
michael@13	3658	export VISUAL
michael@13	3659	p=`echo $prefix | sed -e 's;/;\\\\\\\\/;g'`
michael@13	3660	( echo "cp \$1 \$1.bak"
michael@13	3661	echo "cat \$1.bak | sed -e \"/<OpenPKG prefix=$p pkg=openpkg>/,/<\\\\/OpenPKG>/d\" >\$1"
michael@13	3662	echo "rm -f \$1.bak"
michael@13	3663	) >$EDITOR
michael@13	3664	chmod a+x $EDITOR
michael@13	3665	( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
michael@13	3666	rm -f $EDITOR
michael@13	3667	else
michael@13	3668	exists=`grep "<OpenPKG prefix=$prefix pkg=openpkg>" /etc/crontab`
michael@13	3669	if [ ".$exists" != . ]; then
michael@13	3670	p=`echo $prefix | sed -e 's;/;\\\\/;g'`
michael@13	3671	cp /etc/crontab /etc/crontab.bak
michael@13	3672	cat /etc/crontab.bak |\
michael@13	3673	sed -e "/<OpenPKG prefix=$p pkg=openpkg>/,/<\\/OpenPKG>/d" \
michael@13	3674	>/etc/crontab
michael@13	3675	rm -f /etc/crontab.bak >/dev/null 2>&1
michael@13	3676	fi
michael@13	3677	fi
michael@13	3678	;;
michael@428	3679	SunOS/5.* | OSF1/V5.* | NetBSD/* | HP-UX/* | UnixWare/* | AIX/* | CYGWIN*/* | Darwin/* )
michael@13	3680	EDITOR=/tmp/vipw.$$
michael@13	3681	VISUAL="$EDITOR"
michael@13	3682	export EDITOR
michael@13	3683	export VISUAL
michael@13	3684	p=`echo $prefix | sed -e 's;/;\\\\\\\\/;g'`
michael@13	3685	( echo "cp \$1 \$1.bak"
michael@13	3686	echo "cat \$1.bak | sed -e \"/<OpenPKG prefix=$p pkg=openpkg>/,/<\\\\/OpenPKG>/d\" >\$1"
michael@13	3687	echo "rm -f \$1.bak"
michael@13	3688	) >$EDITOR
michael@13	3689	chmod a+x $EDITOR
michael@13	3690	( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
michael@13	3691	rm -f $EDITOR
michael@13	3692	;;
michael@13	3693	IRIX*/6.* )
michael@13	3694	p=`echo $prefix | sed -e 's;/;\\\\\\/;g'`
michael@13	3695	( crontab -l |
michael@13	3696	sed -e "/<OpenPKG prefix=$p pkg=openpkg>/,/<\/OpenPKG>/d"
michael@13	3697	) | /usr/bin/crontab || exit $?
michael@13	3698	;;
michael@13	3699	esac
michael@13	3700	fi
michael@13	3701
michael@13	3702	# delayed removal of top-level directory.
michael@13	3703	( sleep 2
michael@428	3704	rm -rf %{l_prefix}/RPM/PKG/* >/dev/null 2>&1 || true
michael@428	3705	rm -rf %{l_prefix}/RPM/SRC/* >/dev/null 2>&1 || true
michael@428	3706	rm -rf %{l_prefix}/RPM/CACHE/* >/dev/null 2>&1 || true
michael@428	3707	rm -rf %{l_prefix}/RPM/TMP/* %{l_prefix}/RPM/TMP/.[a-z]* >/dev/null 2>&1 || true
michael@13	3708	rm -rf %{l_prefix}/RPM/DB/* %{l_prefix}/RPM/DB/.[a-z]* >/dev/null 2>&1 || true
michael@13	3709	rmdir %{l_prefix}/RPM/DB >/dev/null 2>&1 || true
michael@13	3710	rmdir %{l_prefix}/RPM >/dev/null 2>&1 || true
michael@13	3711	rmdir %{l_prefix} >/dev/null 2>&1 || true
michael@13	3712	) </dev/null >/dev/null 2>/dev/null &
michael@13	3713