OpenPKG Specs: openpkg/rpmdb@c10fb90893b9 (annotated)

openpkg/rpmdb@c10fb90893b9 (annotated)

openpkg/rpmdb

Thu, 04 Oct 2012 20:30:05 +0200

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Thu, 04 Oct 2012 20:30:05 +0200
changeset 715: c10fb90893b9
parent 13: cb59d6afeb61
permissions: -rw-r--r--

Correct out of date build configuration, porting to Solaris 11 network
link infrastructure and new libpcap logic. This additionally allows for
device drivers in subdirectories of /dev. Correct packaged nmap
personalities and signatures to work out of the box. Finally, hack
arpd logic to properly close sockets and quit on TERM by repeating
signaling in the run command script. Sadly, all this fails to correct
the run time behaviour of honeyd which fails to bind to the IP layer.

 #!@l_prefix@/lib/openpkg/bash
 ##
 ##  rpmdb -- OpenPKG RPM Database Administration Utility
 ##  Copyright (c) 2000-2012 OpenPKG GmbH <http://openpkg.com/>
 ##
 ##  This software is property of the OpenPKG GmbH, DE MUC HRB 160208.
 ##  All rights reserved. Licenses which grant limited permission to use,
 ##  copy, modify and distribute this software are available from the
 ##  OpenPKG GmbH.
 ##
 ##  THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED
 ##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 ##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 ##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
 ##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 ##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 ##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 ##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 ##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 ##  SUCH DAMAGE.
 ##
 #   program information
 progname="rpmdb"
 #   configuration defaults
 help=""
 prefix="@l_prefix@"
 dbpath=""
 dbapi=""
 tmpdir=""
 rpm=""
 musr="@l_musr@"
 mgrp="@l_mgrp@"
 mode=""
 force=no
 verbose=2
 ##
 ##  PARSE COMMAND LINE
 ##
 #   iterate over argument line
 args=""
 for opt
 do
     case $opt in
         -*=*) arg=`echo "$opt" | sed 's/^[-_a-zA-Z0-9]*=//'` ;;
            *) arg='' ;;
     esac
     case $opt in
         -h|--help      ) help="Usage"  ;;
         -B|--build     ) mode=build    ;;
         -M|--migrate   ) mode=migrate  ;;
         -R|--rebuild   ) mode=rebuild  ;;
         -C|--cleanup   ) mode=cleanup  ;;
         -F|--fixate    ) mode=fixate   ;;
         -L|--list      ) mode=list     ;;
         -f|--force     ) force=yes     ;;
         -q|--quiet     ) verbose=0     ;;
         -v|--verbose   ) verbose=`expr $verbose + 1` ;;
         --prefix=*     ) prefix=$arg   ;;
         --dbpath=*     ) dbpath=$arg   ;;
         --dblib=*      ) dblib=$arg    ;;
         --tmpdir=*     ) tmpdir=$arg   ;;
         --rpm=*        ) rpm=$arg      ;;
         --musr=*       ) musr=$arg     ;;
         --mgrp=*       ) mgrp=$arg     ;;
         --             ) ;;
         -*             ) help="Invalid option \`$opt'"; break ;;
         *              ) args="$args \"$opt\"" ;;
     esac
 done
 eval "set -- $args"
 #   make sure exactly one run-time mode is specified
 if [ ".$mode" = . ]; then
     help="No or invalid run-time mode specified"
 fi
 #   error or usage message
 if [ ".$help" != . ]; then
     if [ ".$help" != ".Usage" ]; then
         echo "$progname:ERROR: $help" 1>&2
     fi
     cat 1>&2 <<EOT
 $progname:USAGE: $progname [options]
   -h, --help        print usage message (this one)
   -B, --build       build new RPM database from scratch
   -M, --migrate     migrate RPM database to new format
   -R, --rebuild     rebuild new from old RPM database
   -C, --cleanup     cleanup existing RPM database
   -F, --fixate      fixate existing RPM database
   -L, --list        list all RPM database files
   -f, --force       operate in force mode (no save operations)
   -q, --quiet       operate in quiet mode (no verbose messages at all)
   -v, --verbose     operate in more verbose mode (increase verbose level)
   --prefix=PREFIX   use OpenPKG instance under PREFIX
   --dbpath=PATH     use OpenPKG RPM database under PATH
   --dblib=LIB       use OpenPKG RPM database backend library ("db" or "sqlite")
   --tmpdir=PATH     use OpenPKG temporary directory under PATH
   --rpm=PROG        use OpenPKG RPM executable PROG
   --musr=USERNAME   use OpenPKG management user USERNAME
   --mgrp=GROUPNAME  use OpenPKG management group GROUPNAME
 This is OpenPKG rpmdb, an RPM database administration utility, providing
 lower-level maintainance functions for the Berkeley-DB based RPM
 database. It allows building new RPM databases from scratch, rebuilding
 a new from an old RPM database (content dumping and reloading),
 cleaning up problems on an existing RPM database (removal of DB region
 files, etc) and fixating the files in an existing RPM database (file
 attributes).
 EOT
     if [ ".$help" != ".Usage" ]; then
         exit 2
     else
         exit 0
     fi
 fi
 #   delayed determination of variables
 if [ ".$dbpath" = . ]; then
     dbpath="$prefix/RPM/DB"
 fi
 if [ ".$dblib" = . ]; then
     dblib="${1-db}"
 fi
 if [ ".$tmpdir" = . ]; then
     tmpdir="$prefix/RPM/TMP"
 fi
 if [ ".$rpm" = . ]; then
     rpm="$prefix/bin/openpkg rpm"
 fi
 ##
 ##  DATABASE FILE INFORMATION
 ##
 dbfiles="
 :btree:Basenames
 :btree:Conflictname
 :temporary:Depends
 :btree:Dirnames
 :btree:Filedigests
 :btree:Filepaths
 :btree:Group
 :btree:Installtid
 :btree:Name
 :hash:Packagecolor
 :btree:Packages
 :btree:Providename
 :btree:Provideversion
 :hash:Pubkeys
 :btree:Requirename
 :btree:Requireversion
 :hash:Sha1header
 :hash:Sigmd5
 :btree:Triggername
 :btree:Obsoletename
 :btree:Nvra
 :btree:Sourcepkgid
 :btree:BuildEnvironment
 :region:__db.001
 :region:__db.002
 :region:__db.003
 :region:__db.004
 :region:__db.005
 :region:__db.006
 :region:__db.007
 :region:__db.008
 :region:__db.009
 :*:Basenames
 :*:Conflictname
 :temporary:Depends
 :*:Dirnames
 :*:Filedigests
 :*:Filepaths
 :*:Group
 :*:Installtid
 :*:Name
 :*:Packagecolor
 :*:Packages
 :*:Providename
 :*:Provideversion
 :*:Pubkeys
 :*:Requirename
 :*:Requireversion
 :*:Sha1header
 :*:Sigmd5
 :*:Triggername
 :*:Obsoletename
 :*:Nvra
 :*:Sourcepkgid
 :*:BuildEnvironment
 "
 ##
 ##  HELPER FUNCTIONS
 ##
 error () {
     echo "$progname:ERROR: $*" 1>&2
     exit 1
 }
 warning () {
     echo "$progname:WARNING: $*" 1>&2
 }
 verbose () {
     local level=$1
     shift
     if [ $level -le $verbose ]; then
         local lead=""
         case "$level" in
 ) lead="" ;;
 ) lead="" ;;
 ) lead="  " ;;
             * ) lead="    " ;;
         esac
         echo "$progname: $lead$*" 1>&2
     fi
 }
 rpmdb_version_load () {
     if [ -f $dbpath/VERSION ]; then
         eval `(. $dbpath/VERSION || exit $?; echo "DBAPI=\"$DBAPI\"; DBLIB=\"$DBLIB\"; DBVER=\"$DBVER\"")`
     fi
     if [ ".$DBAPI" = . ]; then DBAPI="3";     fi
     if [ ".$DBLIB" = . ]; then DBLIB="db";    fi
     if [ ".$DBVER" = . ]; then DBVER="4.1.2"; fi
 }
 rpmdb_version_save () {
     if [ ".$DBAPI" = .3 ]; then
         DBLIB="db"
         DBVER=`$rpmdb_load -V 2>&1 |\
             grep 'Berkeley DB [0-9][0-9]*\.[0-9][0-9]*' |\
             sed -e 's;^;X;' \
                 -e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*$;\1;' \
                 -e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\).*$;\1.0;' \
                 -e 's;^X.*$;0.0.0;'`
     elif [ ".$DBAPI" = .4 ]; then
         DBLIB="sqlite"
         DBVER=`$rpmdb_sqlite --version 2>&1 |\
             grep '^[0-9][0-9]*\.[0-9][0-9]*' |\
             sed -e 's;^;X;' \
                 -e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*$;\1;' \
                 -e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\).*$;\1.0;' \
                 -e 's;^X.*$;0.0.0;'`
     fi
     ( echo "DBAPI=$DBAPI"
       echo "DBLIB=$DBLIB"
       echo "DBVER=$DBVER"
     ) >$dbpath/VERSION.new || exit $?
     mv $dbpath/VERSION.new $dbpath/VERSION || exit $?
     chown $musr:$mgrp $dbpath/VERSION 2>/dev/null || true
     chmod 644 $dbpath/VERSION 2>/dev/null || true
 }
 rpm () {
     local opts="--define '_dbpath `echo $dbpath | sed -e 's;/*$;;' -e 's;$;/;'`'"
     opts="$opts --define '_repackage_all_erasures 0'"
     if [ ".$force" = .yes ]; then
         opts="$opts --define '__dbi_private yes'"
     fi
     verbose 3 "run: $rpm $opts $@"
     eval "$rpm $opts \"\$@\""
 }
 rpmdb_load="$prefix/lib/openpkg/db_tool load"
 rpmdb_dump="$prefix/lib/openpkg/db_tool dump"
 rpmdb_sqlite="$prefix/lib/openpkg/sqlite3"
 ##
 ##  RPM DATABASE OPERATIONS
 ##
 db_wait () {
     #   wait until RPM has released the database in case we are called
     #   asynchronously to RPM (especially important when upgrading from
     #   RPM 4.0 where concurrent access is still not possible)
     verbose 2 "waiting for RPM database to be available"
     local i=0
     while [ $i -lt 10 ]; do
         if $prefix/libexec/openpkg/rpm -q openpkg >/dev/null 2>&1; then
             break
         fi
         sleep 1
         i=`expr $i + 1`
     done
     if [ $i -eq 10 ]; then
         exit 1
     else
         exit 0
     fi
 }
 db_remove () {
     #   remove all known files
     verbose 2 "removing (possibly existing) old RPM database DB files"
     for dbfile in $dbfiles; do
         eval `echo $dbfile | sed -e 's/^\(.*\):\(.*\):\(.*\)$/dbapi="\1"; dbtype="\2"; dbfile="\3";/'`
         verbose 3 "removing database file: $dbpath/$dbfile ($dbapi:$dbtype)"
         rm -f $dbpath/$dbfile
     done
 }
 db_init () {
     #   perform official "initdb" operation
     verbose 2 "creating new RPM database (built-in RPM procedure)"
     rpm --initdb
     rpmdb_version_save
 }
 db_unbreak () {
     #   cleanup DB files
     verbose 2 "cleaning up RPM database DB files"
     for dbfile in $dbfiles; do
         eval `echo $dbfile | sed -e 's/^\(.*\):\(.*\):\(.*\)$/dbapi="\1"; dbtype="\2"; dbfile="\3";/'`
         if [ -f $dbpath/$dbfile ]; then
             if [ ".$dbapi" = .3 -a ".$dbtype" = .region ]; then
                 verbose 3 "cleaning up DB file: $dbpath/$dbfile ($dbapi:$dbtype)"
                 rm -f $dbpath/$dbfile || true
             elif [ ".$dbtype" = .temporary ]; then
                 verbose 3 "cleaning up DB file: $dbpath/$dbfile ($dbapi:$dbtype)"
                 rm -f $dbpath/$dbfile || true
             fi
         fi
     done
 }
 db_convert () {
     #   make sure all RPM database DB files have the correct type
     #   (as the type can be different during upgrading from RPM 4 to RPM 5)
     verbose 2 "making sure RPM database are of the correct type"
     for dbfile in $dbfiles; do
         eval `echo $dbfile | sed -e 's/^\(.*\):\(.*\):\(.*\)$/dbapi="\1"; dbtype="\2"; dbfile="\3";/'`
         if [ ".$dbapi" != ".$DBAPI" ]; then
             continue
         fi
         if [ -f $dbpath/$dbfile ]; then
             if [ ".$dbapi" = .3 ] && [ ".$dbtype" = .hash -o ".$dbtype" = .btree ]; then
                 dbtype_old="`$rpmdb_dump -h $tmpdir -r $dbpath/$dbfile | grep '^type=' | sed -e 'q' | sed -e 's/^type=//'`"
                 if [ ".$dbtype_old" != ".$dbtype" ]; then
                     verbose 3 "converting DB file: $dbpath/$dbfile ($dbtype_old -> $dbtype)"
                     rm -f $dbpath/$dbfile.new
                     $rpmdb_dump -h $tmpdir -r $dbpath/$dbfile |\
                     sed -e "s/^type=.*/type=$dbtype/" -e '/^h_nelem=.*/d' |\
                     $rpmdb_load -h $tmpdir $dbpath/$dbfile.new
                     if $rpmdb_dump -h $tmpdir -r $dbpath/$dbfile.new >/dev/null 2>&1; then
                         rm -f $dbpath/$dbfile
                         mv $dbpath/$dbfile.new $dbpath/$dbfile
                     else
                         warning "failed to convert RPM DB file \"$dbfile\""
                     fi
                 fi
             fi
         fi
     done
 }
 db_reload () {
     #   rebuilding new from old RPM database DB files by dumping and
     #   reloading their entire content
     verbose 2 "dumping and reloading RPM database DB file contents"
     for dbfile in $dbfiles; do
         eval `echo $dbfile | sed -e 's/^\(.*\):\(.*\):\(.*\)$/dbapi="\1"; dbtype="\2"; dbfile="\3";/'`
         if [ ".$dbapi" != ".$DBAPI" ]; then
             continue
         fi
         if [ -f $dbpath/$dbfile ]; then
             if [ ".$dbapi" = .3 ]; then
                 verbose 3 "dumping and reloading DB file: $dbpath/$dbfile ($dbtype)"
                 if [ ".$dbtype" = .hash -o ".$dbtype" = .btree ]; then
                     rm -f $dbpath/$dbfile.new
                     $rpmdb_dump -h $tmpdir -r $dbpath/$dbfile |\
                     $rpmdb_load -h $tmpdir $dbpath/$dbfile.new
                     if $rpmdb_dump -h $tmpdir -r $dbpath/$dbfile.new >/dev/null 2>&1; then
                         rm -f $dbpath/$dbfile
                         mv $dbpath/$dbfile.new $dbpath/$dbfile
                     else
                         warning "failed to reload RPM DB file \"$dbfile\""
                     fi
                 elif [ ".$dbtype" = .region ]; then
                     rm -f $dbpath/$dbfile || true
                 elif [ ".$dbtype" = .temporary ]; then
                     rm -f $dbpath/$dbfile || true
                 fi
             elif [ ".$dbapi" = .4 ]; then
                 verbose 3 "dumping and reloading DB file: $dbpath/$dbfile ($dbtype)"
                 rm -f $dbpath/$dbfile.new
                 $rpmdb_sqlite $dbpath/$dbfile .dump |\
                 $rpmdb_sqlite $dbpath/$dbfile.new
                 if $rpmdb_sqlite $dbpath/$dbfile.new >/dev/null 2>&1; then
                     rm -f $dbpath/$dbfile
                     mv $dbpath/$dbfile.new $dbpath/$dbfile
                 else
                     warning "failed to reload RPM DB file \"$dbfile\""
                 fi
             fi
         fi
     done
     rpmdb_version_save
 }
 db_migrate () {
     #   perform database migration
     if [ ".$1" != . ]; then
         dblib="$1"
     fi
     dbapi_old="$DBAPI"
     if [ ".$dblib" = .db ]; then
         dbapi_new="3"
     elif [ ".$dblib" = .sqlite ]; then
         dbapi_new="4"
     else
         error "unknown RPM database backend library \"$dblib\""
     fi
     if [ ".$dbapi_new" = ".$dbapi_old" ]; then
         error "RPM database already uses requested backend ($DBAPI:$DBLIB:$DBVER)"
     fi
     verbose 2 "migrating RPM database"
     rpm --rebuilddb --dbapi "$dbapi_old" --rebuilddbapi "$dbapi_new"
     verbose 3 "old RPM database format: $DBAPI:$DBLIB:$DBVER"
     DBAPI="$dbapi_new"
     rpmdb_version_save
     rpmdb_version_load
     verbose 3 "new RPM database format: $DBAPI:$DBLIB:$DBVER"
 }
 db_rebuild () {
     #   perform official "rebuilddb" operation
     verbose 2 "rebuilding RPM database (built-in RPM procedure)"
     rpm --rebuilddb
     rpmdb_version_save
 }
 db_operate () {
     #   perform some read/write operation on RPM database
     #   (we have no package available, but removing and reimporting
     #   the OpenPKG OpenPGP keys is a harmless thing and always possible)
     verbose 2 "performing read/write operation on RPM database"
     for spec in \
         openpkg.org.pgp:gpg-pubkey-63c4cb9f-3c591eda \
         openpkg.com.pgp:gpg-pubkey-61b7ae34-4544a6af \
         openpkg.net.pgp:gpg-pubkey-52197903-4544a74d \
     ; do
         eval `echo "$spec" | sed -e 's/^\(.*\):\(.*\)$/file="\1"; package="\2"/'`
         rpm -q $package >/dev/null 2>&1 && rpm -e $package --allmatches || true
         rpm -q $package >/dev/null 2>&1 || rpm --import $prefix/etc/openpkg/$file || true
     done
     rpm -qa >/dev/null 2>&1
 }
 db_fixate () {
     #   fix ownership and permissions of (especially newly created)
     #   RPM database files to make sure they are consistent
     verbose 2 "making sure RPM database files have consistent attributes"
     for dbfile in $dbfiles; do
         eval `echo $dbfile | sed -e 's/^\(.*\):\(.*\):\(.*\)$/dbapi="\1"; dbtype="\2"; dbfile="\3";/'`
         if [ ".$dbapi" != ".$DBAPI" ]; then
             continue
         fi
         verbose 3 "fixating DB file: $dbpath/$dbfile ($dbtype)"
         if [ -f $dbpath/$dbfile ]; then
             chown $musr:$mgrp $dbpath/$dbfile 2>/dev/null || true
             chmod 644 $dbpath/$dbfile 2>/dev/null || true
         fi
     done
     chown $musr:$mgrp $dbpath/VERSION 2>/dev/null || true
     chmod 644 $dbpath/VERSION 2>/dev/null || true
 }
 db_list () {
     #   list all database files
     for dbfile in $dbfiles; do
         eval `echo $dbfile | sed -e 's/^\(.*\):\(.*\):\(.*\)$/dbapi="\1"; dbtype="\2"; dbfile="\3";/'`
         if [ ".$dbapi" != ".$DBAPI" ]; then
             continue
         fi
         if [ ! -f "$dbpath/$dbfile" ]; then
             continue
         fi
         if [ $verbose -eq 0 ]; then
             echo "$dbfile"
         elif [ $verbose -eq 1 ]; then
             echo "$dbpath/$dbfile"
         elif [ $verbose -ge 2 ]; then
             echo "$dbpath/$dbfile ($dbtype)"
         fi
     done
 }
 ##
 ##  ENVIRONMENT CONSISTENCY CHECKS
 ##
 #   sanity check OpenPKG instance
 if [ ".$prefix" = . ]; then
     error "OpenPKG instance directory is empty"
 fi
 if [ ! -d $prefix ]; then
     error "OpenPKG instance directory \"$prefix\" not found"
 fi
 if [ ! -x $prefix/bin/openpkg ]; then
     error "OpenPKG instance directory \"$prefix\" not valid"
 fi
 #   sanity check OpenPKG RPM database
 if [ ".$dbpath" = . ]; then
     error "OpenPKG RPM database directory is empty"
 fi
 if [ ! -d $dbpath ]; then
     error "OpenPKG RPM database directory \"$dbpath\" not found"
 fi
 if [ ! -w $dbpath ]; then
     error "OpenPKG RPM database directory \"$dbpath\" not writable"
 fi
 #   load database information
 rpmdb_version_load
 ##
 ##  DISPATCH INTO COMMANDS
 ##
 case "$mode" in
     build )
         verbose 1 "BUILDING NEW RPM DATABASE FROM SCRATCH ($dbpath)"
         db_remove
         db_init
         db_fixate
         db_operate
         ;;
     migrate )
         verbose 1 "MIGRATING RPM DATABASE FORMAT ($dbpath)"
         db_unbreak
         db_convert
         db_migrate
         db_rebuild
         db_fixate
         db_operate
         ;;
     rebuild )
         verbose 1 "REBUILDING NEW FROM OLD RPM DATABASE ($dbpath)"
         db_unbreak
         db_convert
         db_reload
         db_rebuild
         db_fixate
         db_operate
         ;;
     cleanup )
         verbose 1 "CLEANING UP EXISTING RPM DATABASE ($dbpath)"
         db_unbreak
         db_convert
         db_rebuild
         db_fixate
         db_operate
         ;;
     fixate )
         verbose 1 "FIXATING EXISTING RPM DATABASE ($dbpath)"
         db_fixate
         ;;
     list )
         db_list
         ;;
 esac
 exit 0

OpenPKG Specs / annotate

openpkg/rpmdb@c10fb90893b9 (annotated)

openpkg/rpmdb