OpenPKG Specs / file comparison

comparison: openpkg/openssl.patch

openpkg/openssl.patch

changeset 228
19b611159e28
child 428
f880f219c566
equal deleted inserted replaced
-1:000000000000 0:f28754fc20ec
1 Index: Configure
2 --- Configure.orig 2007-09-16 14:24:17 +0200
3 +++ Configure 2007-10-17 12:14:14 +0200
4 @@ -6,7 +6,6 @@
5 ##
6
7 require 5.000;
8 -use strict;
9
10 # see INSTALL for instructions.
11
12 @@ -34,6 +33,7 @@
13 # (Default: KRB5_DIR/include)
14 # --with-krb5-flavor Declare what flavor of Kerberos 5 is used. Currently
15 # supported values are "MIT" and "Heimdal". A value is required.
16 +# --with-cc compiler to use for $CC (useful if cc is a disguised gcc)
17 #
18 # --test-sanity Make a number of sanity checks on the data in this file.
19 # This is a debugging tool for OpenSSL developers.
20 @@ -113,6 +113,7 @@
21 #$bits2="THIRTY_TWO_BIT ";
22 my $bits1="THIRTY_TWO_BIT ";
23 my $bits2="SIXTY_FOUR_BIT ";
24 +my $ccarg;
25
26 my $x86_elf_asm="x86cpuid-elf.o:bn86-elf.o co86-elf.o:dx86-elf.o yx86-elf.o:ax86-elf.o:bx86-elf.o:mx86-elf.o:sx86-elf.o s512sse2-elf.o:cx86-elf.o:rx86-elf.o:rm86-elf.o:r586-elf.o";
27 my $x86_coff_asm="x86cpuid-cof.o:bn86-cof.o co86-cof.o:dx86-cof.o yx86-cof.o:ax86-cof.o:bx86-cof.o:mx86-cof.o:sx86-cof.o s512sse2-cof.o:cx86-cof.o:rx86-cof.o:rm86-cof.o:r586-cof.o";
28 @@ -402,8 +403,8 @@
29
30 #### IBM's AIX.
31 "aix3-cc", "cc:-O -DB_ENDIAN -qmaxmem=16384::(unknown):AIX::BN_LLONG RC4_CHAR:::",
32 -"aix-gcc", "gcc:-O -DB_ENDIAN::-D_THREAD_SAFE:AIX::BN_LLONG RC4_CHAR::aix_ppc32.o::::::::::dlfcn:aix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 32",
33 -"aix64-gcc","gcc:-maix64 -O -DB_ENDIAN::-D_THREAD_SAFE:AIX::SIXTY_FOUR_BIT_LONG RC4_CHAR::aix_ppc64.o::::::::::dlfcn:aix-shared::-maix64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X64",
34 +"aix-gcc", "gcc:-O -DB_ENDIAN::-D_THREAD_SAFE:AIX::BN_LLONG RC4_CHAR::aix_ppc32.o::::::::::dlfcn:aix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::",
35 +"aix64-gcc","gcc:-maix64 -O -DB_ENDIAN::-D_THREAD_SAFE:AIX::SIXTY_FOUR_BIT_LONG RC4_CHAR::aix_ppc64.o::::::::::dlfcn:aix-shared::-maix64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::",
36 # Below targets assume AIX 5. Idea is to effectively disregard $OBJECT_MODE
37 # at build time. $OBJECT_MODE is respected at ./config stage!
38 "aix-cc", "cc:-q32 -O -DB_ENDIAN -qmaxmem=16384 -qro -qroconst::-qthreaded:AIX::BN_LLONG RC4_CHAR::aix_ppc32.o::::::::::dlfcn:aix-shared::-q32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 32",
39 @@ -697,6 +698,10 @@
40 {
41 exit(&test_sanity());
42 }
43 + elsif (/^--with-cc=(.*)$/)
44 + {
45 + $ccarg=$1
46 + }
47 elsif (/^reconfigure/ || /^reconf/)
48 {
49 if (open(IN,"<$Makefile"))
50 @@ -949,7 +954,7 @@
51 print "IsMK1MF=$IsMK1MF\n";
52
53 my @fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
54 -my $cc = $fields[$idx_cc];
55 +my $cc = $ccarg ? $ccarg : $fields[$idx_cc];
56 my $cflags = $fields[$idx_cflags];
57 my $unistd = $fields[$idx_unistd];
58 my $thread_cflag = $fields[$idx_thread_cflag];
59 Index: config
60 --- config.orig 2007-08-01 13:21:35 +0200
61 +++ config 2007-10-17 12:13:48 +0200
62 @@ -401,9 +401,9 @@
63
64 # figure out if gcc is available and if so we use it otherwise
65 # we fallback to whatever cc does on the system
66 -GCCVER=`(gcc -dumpversion) 2>/dev/null`
67 +GCCVER=`(gcc -dumpversion 2>/dev/null && exit; cc --version 2>/dev/null | grep GCC >/dev/null && cc -dumpversion )`
68 if [ "$GCCVER" != "" ]; then
69 - CC=gcc
70 + CC=cc; gcc -dumpversion >/dev/null 2>&1 && CC=gcc
71 # then strip off whatever prefix egcs prepends the number with...
72 # Hopefully, this will work for any future prefixes as well.
73 GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
74 @@ -412,8 +412,10 @@
75 # major and minor version numbers.
76 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
77 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
78 + SUFFIX=gcc
79 else
80 CC=cc
81 + SUFFIX=cc
82 fi
83 GCCVER=${GCCVER:-0}
84 if [ "$SYSTEM" = "HP-UX" ];then
85 @@ -422,7 +424,7 @@
86 if [ $GCCVER -ge 30 ]; then
87 # PA64 support only came in with gcc 3.0.x.
88 # We check if the preprocessor symbol __LP64__ is defined...
89 - if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
90 + if echo "__LP64__" | $CC -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
91 : # __LP64__ has slipped through, it therefore is not defined
92 else
93 GCC_BITS="64"
94 @@ -433,13 +435,14 @@
95 if [ $GCCVER -ge 30 ]; then
96 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
97 # to be working, at the very least 'make test' passes...
98 - if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
99 + if $CC -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
100 GCC_ARCH="-m64"
101 else
102 GCC_ARCH="-m32"
103 fi
104 fi
105 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
106 + if [ $GCCVER -eq 0 ]; then
107 CCVER=`(cc -V 2>&1) 2>/dev/null | \
108 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
109 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
110 @@ -452,6 +455,7 @@
111 sleep 5
112 fi
113 fi
114 + fi
115 fi
116
117 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
118 @@ -469,6 +473,7 @@
119
120 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
121 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
122 + (gcc) 2>&1 | grep -iv "not found" > /dev/null && CC=gcc
123 fi
124
125 CCVER=${CCVER:-0}
126 @@ -488,7 +493,7 @@
127 if [ $CPU -ge 4000 ]; then
128 options="$options -mips2"
129 fi
130 - OUT="irix-$CC"
131 + OUT="irix-$SUFFIX"
132 ;;
133 mips3-sgi-irix)
134 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
135 @@ -498,11 +503,11 @@
136 #else
137 # options="$options -mips3"
138 #fi
139 - OUT="irix-mips3-$CC"
140 + OUT="irix-mips3-$SUFFIX"
141 ;;
142 mips4-sgi-irix64)
143 echo "WARNING! If you wish to build 64-bit library, then you have to"
144 - echo " invoke './Configure irix64-mips4-$CC' *manually*."
145 + echo " invoke './Configure irix64-mips4-$SUFFIX' *manually*."
146 if [ "$TEST" = "false" -a -t 1 ]; then
147 echo " You have about 5 seconds to press Ctrl-C to abort."
148 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
149 @@ -514,7 +519,7 @@
150 #else
151 # options="$options -mips3"
152 #fi
153 - OUT="irix-mips3-$CC"
154 + OUT="irix-mips3-$SUFFIX"
155 ;;
156 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
157 ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
158 @@ -522,10 +527,10 @@
159 alpha-*-linux2)
160 ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
161 case ${ISA:-generic} in
162 - *[678]) OUT="linux-alpha+bwx-$CC" ;;
163 - *) OUT="linux-alpha-$CC" ;;
164 + *[678]) OUT="linux-alpha+bwx-$SUFFIX" ;;
165 + *) OUT="linux-alpha-$SUFFIX" ;;
166 esac
167 - if [ "$CC" = "gcc" ]; then
168 + if [ $GCCVER -gt 0 ]; then
169 case ${ISA:-generic} in
170 EV5|EV45) options="$options -mcpu=ev5";;
171 EV56|PCA56) options="$options -mcpu=ev56";;
172 @@ -592,7 +597,7 @@
173 s390x-*-linux2) OUT="linux-generic64"; options="$options -DB_ENDIAN" ;;
174 x86_64-*-linux?) OUT="linux-x86_64" ;;
175 *86-*-linux2) OUT="linux-elf"
176 - if [ "$GCCVER" -gt 28 ]; then
177 + if [ $GCCVER -gt 28 ]; then
178 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
179 options="$options -march=pentium"
180 fi
181 @@ -606,17 +611,17 @@
182 *-*-linux1) OUT="linux-aout" ;;
183 *-*-linux2) OUT="linux-generic32" ;;
184 sun4[uv]*-*-solaris2)
185 - OUT="solaris-sparcv9-$CC"
186 + OUT="solaris-sparcv9-$SUFFIX"
187 ISA64=`(isalist) 2>/dev/null | grep sparcv9`
188 if [ "$ISA64" != "" ]; then
189 - if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
190 + if [ $GCCVER -eq 0 -a $CCVER -ge 50 ]; then
191 echo "WARNING! If you wish to build 64-bit library, then you have to"
192 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
193 if [ "$TEST" = "false" -a -t 1 ]; then
194 echo " You have about 5 seconds to press Ctrl-C to abort."
195 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
196 fi
197 - elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
198 + elif [ $GCCVER -gt 0 -a "$GCC_ARCH" = "-m64" ]; then
199 # $GCC_ARCH denotes default ABI chosen by compiler driver
200 # (first one found on the $PATH). I assume that user
201 # expects certain consistency with the rest of his builds
202 @@ -639,21 +644,21 @@
203 fi
204 fi
205 ;;
206 - sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
207 - sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
208 - sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
209 + sun4m-*-solaris2) OUT="solaris-sparcv8-$SUFFIX" ;;
210 + sun4d-*-solaris2) OUT="solaris-sparcv8-$SUFFIX" ;;
211 + sun4*-*-solaris2) OUT="solaris-sparcv7-$SUFFIX" ;;
212 *86*-*-solaris2)
213 ISA64=`(isalist) 2>/dev/null | grep amd64`
214 - if [ "$ISA64" != "" ]; then
215 - OUT="solaris64-x86_64-$CC"
216 + if [ "$ISA64" != "" -a $GCCVER -gt 0 -a "$GCC_ARCH" = "-m64" ]; then
217 + OUT="solaris64-x86_64-$SUFFIX"
218 else
219 - OUT="solaris-x86-$CC"
220 + OUT="solaris-x86-$SUFFIX"
221 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then
222 options="$options no-sse2"
223 fi
224 fi
225 ;;
226 - *-*-sunos4) OUT="sunos-$CC" ;;
227 + *-*-sunos4) OUT="sunos-$SUFFIX" ;;
228
229 *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
230 alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
231 @@ -677,7 +682,7 @@
232 *-*-osf) OUT="osf1-alpha-cc" ;;
233 *-*-tru64) OUT="tru64-alpha-cc" ;;
234 *-*-[Uu]nix[Ww]are7)
235 - if [ "$CC" = "gcc" ]; then
236 + if [ $GCCVER -gt 0 ]; then
237 OUT="unixware-7-gcc" ; options="$options no-sse2"
238 else
239 OUT="unixware-7" ; options="$options no-sse2 -D__i386__"
240 @@ -688,12 +693,12 @@
241 *-*-vos)
242 options="$options no-threads no-shared no-asm no-dso"
243 EXE=".pm"
244 - OUT="vos-$CC" ;;
245 + OUT="vos-$SUFFIX" ;;
246 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
247 RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
248 *-siemens-sysv4) OUT="SINIX" ;;
249 *-hpux1*)
250 - if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
251 + if [ $GCCVER -gt 0 -a $GCC_BITS = "64" ]; then
252 OUT="hpux64-parisc2-gcc"
253 fi
254 KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
255 @@ -711,8 +716,8 @@
256 fi
257 OUT="hpux64-ia64-cc"
258 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
259 - OUT=${OUT:-"hpux-parisc2-${CC}"}
260 - if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
261 + OUT=${OUT:-"hpux-parisc2-${SUFFIX}"}
262 + if [ $KERNEL_BITS -eq 64 -a $GCCVER -eq 0 ]; then
263 echo "WARNING! If you wish to build 64-bit library then you have to"
264 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
265 if [ "$TEST" = "false" -a -t 1 ]; then
266 @@ -721,19 +726,19 @@
267 fi
268 fi
269 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
270 - OUT="hpux-parisc-${CC}"
271 + OUT="hpux-parisc-${SUFFIX}"
272 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
273 - OUT="hpux-parisc-${CC}"
274 + OUT="hpux-parisc-${SUFFIX}"
275 else # Motorola(?) CPU
276 - OUT="hpux-$CC"
277 + OUT="hpux-$SUFFIX"
278 fi
279 options="$options -D_REENTRANT" ;;
280 - *-hpux) OUT="hpux-parisc-$CC" ;;
281 + *-hpux) OUT="hpux-parisc-$SUFFIX" ;;
282 *-aix)
283 KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
284 KERNEL_BITS=${KERNEL_BITS:-32}
285 OBJECT_MODE=${OBJECT_MODE:-32}
286 - if [ "$CC" = "gcc" ]; then
287 + if [ $GCCVER -gt 0 ]; then
288 OUT="aix-gcc"
289 elif [ $OBJECT_MODE -eq 64 ]; then
290 echo 'Your $OBJECT_MODE was found to be set to 64'
291 @@ -828,7 +833,7 @@
292 #fi
293
294 if [ -z "$OUT" ]; then
295 - OUT="$CC"
296 + OUT="$SUFFIX"
297 fi
298
299 if [ ".$PERL" = . ] ; then
300 @@ -860,9 +865,9 @@
301 # compiler for the platform ... in which case we add it on
302 # the end ... otherwise we leave it off
303
304 -$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
305 +$PERL ./Configure LIST | grep "$OUT-$SUFFIX" > /dev/null
306 if [ $? = "0" ]; then
307 - OUT="$OUT-$CC"
308 + OUT="$OUT-$SUFFIX"
309 fi
310
311 OUT="$PREFIX$OUT"
312 @@ -872,9 +877,9 @@
313 echo Configuring for $OUT
314
315 if [ "$TEST" = "true" ]; then
316 - echo $PERL ./Configure $OUT $options
317 + echo $PERL ./Configure $OUT --with-cc=$CC $options
318 else
319 - $PERL ./Configure $OUT $options
320 + $PERL ./Configure $OUT --with-cc=$CC $options
321 fi
322 else
323 echo "This system ($OUT) is not supported. See file INSTALL for details."
324 Index: crypto/objects/obj_dat.pl
325 --- crypto/objects/obj_dat.pl.orig 2005-08-29 01:20:47 +0200
326 +++ crypto/objects/obj_dat.pl 2007-10-17 12:13:48 +0200
327 @@ -1,9 +1,5 @@
328 #!/usr/local/bin/perl
329
330 -# fixes bug in floating point emulation on sparc64 when
331 -# this script produces off-by-one output on sparc64
332 -use integer;
333 -
334 sub obj_cmp
335 {
336 local(@a,@b,$_,$r);
337 Index: util/mklink.pl
338 --- util/mklink.pl.orig 2006-02-09 13:28:30 +0100
339 +++ util/mklink.pl 2007-10-17 12:13:48 +0200
340 @@ -15,13 +15,12 @@
341 # Apart from this, this script should be able to handle even the most
342 # pathological cases.
343
344 -use Cwd;
345 -
346 my $from = shift;
347 my @files = @ARGV;
348
349 my @from_path = split(/[\\\/]/, $from);
350 -my $pwd = getcwd();
351 +my $pwd = `pwd`;
352 +$pwd =~ s/\n$//s;
353 chomp($pwd);
354 my @pwd_path = split(/[\\\/]/, $pwd);
355

Mercurial Repository: OpenPKG Specs

Europalab SCM Repository Server

mercurial