comparison: asterisk/manager.conf
asterisk/manager.conf
- changeset 281
- acad5c9dea5f
equal
deleted
inserted
replaced
| -1:000000000000 | 0:27ae95af578d |
|---|---|
| 1 ; | |
| 2 ; AMI - The Asterisk Manager Interface | |
| 3 ; | |
| 4 ; Third party application call management support and PBX event supervision | |
| 5 ; | |
| 6 ; This configuration file is read every time someone logs in | |
| 7 ; | |
| 8 ; Use the "manager list commands" at the CLI to list available manager commands | |
| 9 ; and their authorization levels. | |
| 10 ; | |
| 11 ; "manager show command <command>" will show a help text. | |
| 12 ; | |
| 13 ; ---------------------------- SECURITY NOTE ------------------------------- | |
| 14 ; Note that you should not enable the AMI on a public IP address. If needed, | |
| 15 ; block this TCP port with iptables (or another FW software) and reach it | |
| 16 ; with IPsec, SSH, or SSL vpn tunnel. You can also make the manager | |
| 17 ; interface available over http if Asterisk's http server is enabled in | |
| 18 ; http.conf and if both "enabled" and "webenabled" are set to yes in | |
| 19 ; this file. Both default to no. httptimeout provides the maximum | |
| 20 ; timeout in seconds before a web based session is discarded. The | |
| 21 ; default is 60 seconds. | |
| 22 ; | |
| 23 ;[general] | |
| 24 ;displaysystemname = yes | |
| 25 ;enabled = no | |
| 26 ;webenabled = yes | |
| 27 ;port = 5038 | |
| 28 | |
| 29 ;httptimeout = 60 | |
| 30 ; a) httptimeout sets the Max-Age of the http cookie | |
| 31 ; b) httptimeout is the amount of time the webserver waits | |
| 32 ; on a action=waitevent request (actually its httptimeout-10) | |
| 33 ; c) httptimeout is also the amount of time the webserver keeps | |
| 34 ; a http session alive after completing a successful action | |
| 35 | |
| 36 ;bindaddr = 0.0.0.0 | |
| 37 ;displayconnects = yes | |
| 38 ; | |
| 39 ; Add a Unix epoch timestamp to events (not action responses) | |
| 40 ; | |
| 41 ;timestampevents = yes | |
| 42 | |
| 43 ;[mark] | |
| 44 ;secret = mysecret | |
| 45 ;deny=0.0.0.0/0.0.0.0 | |
| 46 ;permit=209.16.236.73/255.255.255.0 | |
| 47 ; | |
| 48 ; If the device connected via this user accepts input slowly, | |
| 49 ; the timeout for writes to it can be increased to keep it | |
| 50 ; from being disconnected (value is in milliseconds) | |
| 51 ; | |
| 52 ; writetimeout = 100 | |
| 53 ; | |
| 54 ; Authorization for various classes | |
| 55 ;read = system,call,log,verbose,command,agent,user,config | |
| 56 ;write = system,call,log,verbose,command,agent,user,config |
