OpenPKG Specs / file comparison

comparison: openpkg/openpkg.spec

openpkg/openpkg.spec

changeset 13
cb59d6afeb61
child 14
0cd2ee160ef5
equal deleted inserted replaced
-1:000000000000 0:bea8b578e51d
1 ##
2 ## openpkg.spec -- OpenPKG RPM Package Specification
3 ## Copyright (c) 2000-2007 OpenPKG Foundation e.V. <http://openpkg.net/>
4 ## Copyright (c) 2000-2007 Ralf S. Engelschall <http://engelschall.com/>
5 ##
6 ## Permission to use, copy, modify, and distribute this software for
7 ## any purpose with or without fee is hereby granted, provided that
8 ## the above copyright notice and this permission notice appear in all
9 ## copies.
10 ##
11 ## THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
12 ## WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
13 ## MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
14 ## IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
15 ## CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
16 ## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
17 ## LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
18 ## USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
19 ## ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
20 ## OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
21 ## OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
22 ## SUCH DAMAGE.
23 ##
24
25 # NOTICE: This OpenPKG RPM specification is _very_ special, because
26 # it is used both for bootstrapping OpenPKG with its OpenPKG RPM and
27 # for regular builds of OpenPKG RPM in order to upgrade an existing
28 # installation. For this it has to interact correctly with the
29 # "openpkg.boot" script. See the documentation in the file "README"
30 # and the source of the companion script "openpkg.boot" for details,
31 # but do not touch anything here until you are 100% sure about what
32 # you are doing. In short: This script is allowed to use only a very
33 # restricted subset of the OpenPKG RPM functionality!
34
35 # BUILD REQUIREMENTS:
36 # o any sh(1)
37 # o any tar(1)
38 # o any make(1)
39 # o any cc(1)
40
41 # the package version/release
42 %define V_openpkg 20071227
43
44 # the used software versions
45 %define V_rpm 4.2.1
46 %define V_zlib 1.2.3
47 %define V_bzip2 1.0.4
48 %define V_beecrypt 4.1.2
49 %define V_curl 7.17.1
50 %define V_make 3.81
51 %define V_gzip 1.3.12
52 %define V_gzip_r 1.13
53 %define V_patch 2.5.9
54 %define V_tar 1.19
55 %define V_bash 3.2
56 %define V_uuid 1.6.0
57 %define V_config 20060923
58 %define V_registry 1.1.3
59 %define V_perl 5.10.0
60 %define V_openssl 0.9.8g
61 %define V_tools 1.4.5
62 %define V_exec 2.0.1-C
63
64 # package information
65 Name: openpkg
66 Summary: OpenPKG Bootstrap
67 URL: http://www.openpkg.org/
68 Vendor: OpenPKG
69 Packager: OpenPKG Foundation e.V.
70 Distribution: OpenPKG Community
71 Class: CORE
72 Group: Bootstrapping
73 License: MIT/BSD/LGPL/GPL
74 Version: %{V_openpkg}
75 Release: %{V_openpkg}
76
77 # list of sources
78 Source0: ftp://alpha.gnu.org/gnu/patch/patch-%{V_patch}.tar.gz
79 Source1: ftp://ftp.cwru.edu/pub/bash/bash-%{V_bash}.tar.gz
80 Source2: ftp://ftp.gnu.org/gnu/make/make-%{V_make}.tar.gz
81 Source3: ftp://ftp.gnu.org/gnu/tar/tar-%{V_tar}.tar.gz
82 Source4: ftp://ftp.openpkg.org/sources/CPY/config/config-%{V_config}.tar.gz
83 Source5: ftp://ftp.openpkg.org/sources/CPY/openpkg-registry/openpkg-registry-%{V_registry}.tar.gz
84 Source6: ftp://ftp.openpkg.org/sources/CPY/openpkg-tools/openpkg-tools-%{V_tools}.tar.gz
85 Source7: ftp://ftp.openpkg.org/sources/CPY/openpkg/gzip-%{V_gzip}-openpkg-r%{V_gzip_r}.tar
86 Source8: ftp://ftp.openpkg.org/sources/CPY/openpkg/gzip-%{V_gzip}.tar
87 Source9: ftp://ftp.openpkg.org/sources/CPY/openpkg/openpkg-executable-%{V_exec}.tar.gz
88 Source10: ftp://ftp.openpkg.org/sources/CPY/openpkg/rpm-%{V_rpm}.tar.gz
89 Source11: ftp://ftp.openpkg.org/sources/CPY/perl/perl-%{V_perl}-mini.tar.gz
90 Source12: ftp://ftp.openssl.org/source/openssl-%{V_openssl}.tar.gz
91 Source13: ftp://ftp.ossp.org/pkg/lib/uuid/uuid-%{V_uuid}.tar.gz
92 Source14: http://curl.haxx.se/download/curl-%{V_curl}.tar.gz
93 Source15: http://switch.dl.sourceforge.net/beecrypt/beecrypt-%{V_beecrypt}.tar.gz
94 Source16: http://www.bzip.org/%{V_bzip2}/bzip2-%{V_bzip2}.tar.gz
95 Source17: http://www.zlib.net/zlib-%{V_zlib}.tar.gz
96 Source100: bash.patch
97 Source101: beecrypt.patch
98 Source102: make.patch
99 Source103: openssl.patch
100 Source104: perl.patch
101 Source105: tar.patch
102 Source106: rpm.patch.bugfix
103 Source107: rpm.patch.feature
104 Source108: rpm.patch.porting
105 Source109: rpm.patch.regen
106 Source200: HISTORY
107 Source201: README
108 Source202: aux.prereq.sh
109 Source203: aux.usrgrp.sh
110 Source204: aux.wrapbin.sh
111 Source205: aux.wrapsrc.sh
112 Source206: dot.bash_login
113 Source207: dot.bashrc
114 Source208: dot.lsyncrc
115 Source209: install.sh
116 Source210: local.README
117 Source211: lsync
118 Source212: lsync.8
119 Source213: lsync.pod
120 Source214: man.sh
121 Source215: openpkg.1
122 Source216: openpkg.boot
123 Source217: openpkg.com.pgp
124 Source218: openpkg.net.pgp
125 Source219: openpkg.org.pgp
126 Source220: openpkg.pod
127 Source221: openpkg.sh
128 Source222: pod2man.sh
129 Source223: rc
130 Source224: rc.8
131 Source225: rc.conf
132 Source226: rc.func
133 Source227: rc.openpkg
134 Source228: rc.pod
135 Source229: release.8
136 Source230: release.pod
137 Source231: release.sh
138 Source232: root.README
139 Source233: rpm-config.8
140 Source234: rpm-config.pod
141 Source235: rpm-config.sh
142 Source236: rpmdb
143 Source237: rpmtool
144 Source238: rpmtool.8
145 Source239: rpmtool.pod
146 Source240: shtool
147 Source241: uuid.8
148 Source242: uuid.pod
149 Source243: uuid.sh
150 Source244: rpmmacros
151 Source245: rpmpopt
152 Source246: rpmrc
153
154 # build information
155 Prefix: %{l_prefix}
156 BuildRoot: %{l_buildroot}
157 AutoReq: no
158 AutoReqProv: no
159 Provides: OpenPKG
160
161 %description
162 This is the bootstrap package for the RPM-based Unix Software
163 Package Hierarchy OpenPKG. The RPM Package Manager (RPM) is a
164 sophisticated and portable package manager for Unix platforms,
165 which supports automated building, installation, management and
166 deinstallation of Unix software. RPM was originally designed and
167 implemented for the RedHat Linux operating system where it manages
168 every file on the whole system. OpenPKG uses RPM only for managing
169 the files in a particular filesystem hierarchy dedicated to the
170 installation of third-party software packages provided by the
171 OpenPKG project.
172
173 The OpenPKG bootstrap package includes the following software:
174 RPM %{V_rpm}, ZLib %{V_zlib}, GNU Bzip2 %{V_bzip2},
175 GNU Gzip %{V_gzip}, GNU Tar %{V_tar}, GNU Patch %{V_patch},
176 GNU Make %{V_make}, GNU Bash %{V_bash}, cURL %{V_curl},
177 OSSP uuid %{V_uuid}, BeeCrypt %{V_beecrypt},
178 OpenSSL %{V_openssl}, Perl %{V_perl}
179
180 %track
181 prog openpkg:bash = {
182 version = %{V_bash}
183 url = ftp://ftp.cwru.edu/pub/bash/
184 regex = bash-(__VER__)\.tar\.gz
185 }
186 prog openpkg:bzip2 = {
187 version = %{V_bzip2}
188 url = http://www.bzip.org/downloads.html
189 regex = bzip2-(__VER__)\.tar\.gz
190 }
191 prog openpkg:curl = {
192 version = %{V_curl}
193 url = http://curl.haxx.se/download/
194 regex = curl-(__VER__)\.tar\.gz
195 }
196 prog openpkg:gzip = {
197 comment = "rse: intentionally tracked at gnu.org, although fetched from openpkg.org because of uncompression"
198 version = %{V_gzip}
199 url = ftp://ftp.gnu.org/gnu/gzip/
200 regex = gzip-(__VER__)\.tar(\.gz)?
201 }
202 prog openpkg:gzip_r = {
203 version = %{V_gzip_r}
204 url = ftp://ftp.openpkg.org/sources/CPY/openpkg/
205 regex = gzip-%{V_gzip}-openpkg-r(__VER__)\.tar
206 }
207 prog openpkg:make = {
208 version = %{V_make}
209 url = ftp://ftp.gnu.org/gnu/make/
210 regex = make-(__VER__)\.tar\.gz
211 }
212 prog openpkg:patch = {
213 disabled
214 comment = "rse: directory missing after GNU.org security issues"
215 version = %{V_patch}
216 url = ftp://alpha.gnu.org/gnu/patch/
217 regex = patch-(__VER__)\.tar\.gz
218 }
219 prog openpkg:rpm = {
220 disabled
221 comment = "rse: we have a .src.rpm extracted .tar.gz, because there is still no tarball for 4.2.1"
222 version = %{V_rpm}
223 url = ftp://ftp.rpm.org/pub/rpm/dist/rpm-4.2.x/
224 regex = rpm-(4\.2\.\d+)\.tar\.gz
225 }
226 prog openpkg:tar = {
227 version = %{V_tar}
228 url = ftp://ftp.gnu.org/gnu/tar/
229 regex = tar-(__VER__)\.tar\.gz
230 }
231 prog openpkg:zlib = {
232 version = %{V_zlib}
233 url = http://www.zlib.net/
234 regex = zlib-(__VER__)\.tar\.gz
235 }
236 prog openpkg:uuid = {
237 version = %{V_uuid}
238 url = ftp://ftp.ossp.org/pkg/lib/uuid/
239 regex = uuid-(__VER__)\.tar\.gz
240 }
241 prog openpkg:config = {
242 version = %{V_config}
243 url = ftp://ftp.openpkg.org/sources/CPY/config/
244 regex = config-(__VER__)\.tar\.gz
245 }
246 prog openpkg:beecrypt = {
247 version = %{V_beecrypt}
248 url = http://prdownloads.sourceforge.net/beecrypt/
249 regex = beecrypt-(__VER__)\.tar\.gz
250 }
251 prog openpkg:registry = {
252 version = %{V_registry}
253 url = ftp://ftp.openpkg.org/sources/CPY/openpkg-registry/
254 regex = openpkg-registry-(__VER__)\.tar\.gz
255 }
256 prog openpkg:perl = {
257 version = %{V_perl}
258 url = ftp://ftp.openpkg.org/sources/CPY/perl/
259 regex = perl-(__VER__)-mini\.tar\.gz
260 }
261 prog openpkg:openssl = {
262 version = %{V_openssl}
263 url = ftp://ftp.openssl.org/source/
264 regex = openssl-(\d+\.\d+\.\d+[a-z]?)\.tar\.gz
265 }
266 prog openpkg:openpkg-tools = {
267 version = %{V_tools}
268 url = ftp://ftp.openpkg.org/sources/CPY/openpkg-tools/
269 regex = openpkg-tools-(__VER__)\.tar\.gz
270 }
271 prog openpkg:openpkg-executable = {
272 version = %{V_exec}
273 url = ftp://ftp.openpkg.org/sources/CPY/openpkg/
274 regex = openpkg-executable-(__VER__-C)\.tar\.gz
275 }
276
277 %prep
278 # skip in bootstrap phase 2 (see openpkg.boot)
279 [ ".$OPENPKG_BOOT" = .1 ] && exit 0
280
281 # switch into a temporary build area
282 rm -rf openpkg-%{version}
283 mkdir openpkg-%{version}
284 cd openpkg-%{version}
285 rm -f .buildenv
286 touch .buildenv
287
288 # provide a bootstrap alternative to %{SOURCE xxx} because else
289 # it is not possible to upgrade a newer OpenPKG RPM with an older
290 # OpenPKG RPM.
291 echo >>.buildenv 'SOURCE () {'
292 echo >>.buildenv ' if [ -f "%{_specdir}/$1" ]; then'
293 echo >>.buildenv ' echo "%{_specdir}/$1"'
294 echo >>.buildenv ' else'
295 echo >>.buildenv ' echo "%{_sourcedir}/$1"'
296 echo >>.buildenv ' fi'
297 echo >>.buildenv '}'
298 echo >>.buildenv 'VERBOSE () {'
299 echo >>.buildenv ' if [ -f "%{_specdir}/rpmtool" ]; then'
300 echo >>.buildenv ' echo "$*" | sh %{_specdir}/rpmtool msg'
301 echo >>.buildenv ' else'
302 echo >>.buildenv ' echo "$*" | sh %{_sourcedir}/rpmtool msg'
303 echo >>.buildenv ' fi'
304 echo >>.buildenv '}'
305 . ./.buildenv
306
307 # display verbosity header
308 set +x; VERBOSE "PREPARATION: Determine Build Tool Paths"; set -x
309
310 # determine path to shtool
311 shtool=`SOURCE shtool`
312 echo "shtool=$shtool" >>./.buildenv
313
314 # determine development tools
315 # - bootstrapping: %{l_xxx} is set via sed(1)
316 # - upgrading new: %{l_xxx} is set via rpmmacros
317 # - upgrading old: %{l_xxx} is not set at all
318
319 # manually make sure tar(1) is available
320 l_tar=""; export l_tar
321 [ ".%{?l_tar:set}" = .set ] && l_tar="%{l_tar}"
322 [ ".%{?use_tar:set}" = .set ] && l_tar="%{use_tar}"
323 if [ ".$l_tar" = . ]; then
324 l_tar=`sh $shtool path gtar tar`
325 if [ ".$l_tar" = . ]; then
326 echo "openpkg: prerequisite tool \`gtar' or \`tar' not found"
327 exit 1
328 fi
329 fi
330 echo "l_tar=\"$l_tar\"; export l_tar" >>.buildenv
331
332 # manually make sure make(1) is available
333 l_make=""; export l_make
334 [ ".%{?l_make:set}" = .set ] && l_make="%{l_make}"
335 [ ".%{?use_make:set}" = .set ] && l_make="%{use_make}"
336 if [ ".$l_make" = . ]; then
337 l_make=`sh $shtool path gmake make`
338 if [ ".$l_make" = . ]; then
339 echo "openpkg: prerequisite tool \`gmake' or \`make' not found"
340 exit 1
341 fi
342 fi
343 echo "l_make=\"$l_make\"; export l_make" >>.buildenv
344
345 # manually make sure cc(1) is available
346 l_cc=""; export l_cc
347 [ ".%{?l_cc:set}" = .set ] && l_cc="%{l_cc}"
348 [ ".%{?use_cc:set}" = .set ] && l_cc="%{use_cc}"
349 if [ ".$l_cc" = . ]; then
350 l_cc=`sh $shtool path gcc cc`
351 if [ ".$l_cc" = . ]; then
352 echo "openpkg: prerequisite tool \`gcc' or \`cc' not found"
353 exit 1
354 fi
355 fi
356 echo "l_cc=\"$l_cc\"; export l_cc" >>.buildenv
357
358 # manually make sure ar(1) is available
359 l_ar=""; export l_ar
360 [ ".%{?l_ar:set}" = .set ] && l_ar="%{l_ar}"
361 [ ".%{?use_ar:set}" = .set ] && l_ar="%{use_ar}"
362 if [ ".$l_ar" = . ]; then
363 l_ar=`sh $shtool path ar`
364 if [ ".$l_ar" = . ]; then
365 echo "openpkg: prerequisite tool \`ar' not found"
366 exit 1
367 fi
368 fi
369 echo "l_ar=\"$l_ar\"; export l_ar" >>.buildenv
370
371 # manually make sure ld(1) is available
372 l_ld=""; export l_ld
373 [ ".%{?l_ld:set}" = .set ] && l_ld="%{l_ld}"
374 [ ".%{?use_ld:set}" = .set ] && l_ld="%{use_ld}"
375 if [ ".$l_ld" = . ]; then
376 l_ld=`sh $shtool path ld`
377 if [ ".$l_ld" = . ]; then
378 echo "openpkg: prerequisite tool \`ld' not found"
379 exit 1
380 fi
381 fi
382 echo "l_ld=\"$l_ld\"; export l_ld" >>.buildenv
383
384 # manually make sure as(1) is available
385 l_as=""; export l_as
386 [ ".%{?l_as:set}" = .set ] && l_as="%{l_as}"
387 [ ".%{?use_as:set}" = .set ] && l_as="%{use_as}"
388 if [ ".$l_as" = . ]; then
389 l_as=`sh $shtool path as`
390 if [ ".$l_as" = . ]; then
391 echo "openpkg: prerequisite tool \`as' not found"
392 exit 1
393 fi
394 fi
395 echo "l_as=\"$l_as\"; export l_as" >>.buildenv
396
397 # manually make sure strip(1) is available or use a null replacement
398 l_strip=""; export l_strip
399 [ ".%{?l_strip:set}" = .set ] && l_strip="%{l_strip}"
400 [ ".%{?use_strip:set}" = .set ] && l_strip="%{use_strip}"
401 if [ ".$l_strip" = . ]; then
402 l_strip=`sh $shtool path strip ls`
403 if [ ".$l_strip" = . ]; then
404 echo "openpkg: prerequisite tool \`strip' not found"
405 exit 1
406 fi
407 fi
408 echo "l_strip=\"$l_strip\"; export l_strip" >>.buildenv
409
410 # determine path to aux.usrgrp.sh script
411 usrgrp=`SOURCE aux.usrgrp.sh`
412 echo "usrgrp=$usrgrp; export usrgrp" >>./.buildenv
413
414 # display verbosity header
415 set +x; VERBOSE "PREPARATION: Determine OpenPKG User/Group Name/Id Pairs"; set -x
416
417 # determine user/group name/id pairs
418 # - bootstrapping: %{l_[smrn]{usr,grp}} is set via sed(1)
419 # - upgrading new: %{l_[smrn]{usr,grp}} is set via rpmmacros
420 # - upgrading old: %{l_[smrn]{usr,grp}} is not set at all
421 susr=""; [ ".%{?l_susr:set}" = .set ] && susr="%{l_susr}"
422 sgrp=""; [ ".%{?l_sgrp:set}" = .set ] && sgrp="%{l_sgrp}"
423 musr=""; [ ".%{?l_musr:set}" = .set ] && musr="%{l_musr}"
424 mgrp=""; [ ".%{?l_mgrp:set}" = .set ] && mgrp="%{l_mgrp}"
425 rusr=""; [ ".%{?l_rusr:set}" = .set ] && rusr="%{l_rusr}"
426 rgrp=""; [ ".%{?l_rgrp:set}" = .set ] && rgrp="%{l_rgrp}"
427 nusr=""; [ ".%{?l_nusr:set}" = .set ] && nusr="%{l_nusr}"
428 ngrp=""; [ ".%{?l_ngrp:set}" = .set ] && ngrp="%{l_ngrp}"
429 # corresponding ids
430 suid=""; [ ".%{?l_suid:set}" = .set ] && suid="%{l_suid}"
431 sgid=""; [ ".%{?l_sgid:set}" = .set ] && sgid="%{l_sgid}"
432 muid=""; [ ".%{?l_muid:set}" = .set ] && muid="%{l_muid}"
433 mgid=""; [ ".%{?l_mgid:set}" = .set ] && mgid="%{l_mgid}"
434 ruid=""; [ ".%{?l_ruid:set}" = .set ] && ruid="%{l_ruid}"
435 rgid=""; [ ".%{?l_rgid:set}" = .set ] && rgid="%{l_rgid}"
436 nuid=""; [ ".%{?l_nuid:set}" = .set ] && nuid="%{l_nuid}"
437 ngid=""; [ ".%{?l_ngid:set}" = .set ] && ngid="%{l_ngid}"
438 # compat:
439 usr=""; [ ".%{?l_fsusr:set}" = .set ] && usr="%{l_fsusr}"
440 grp=""; [ ".%{?l_fsgrp:set}" = .set ] && grp="%{l_fsgrp}"
441 eval `sh $usrgrp \
442 --usr="$usr" --grp="$grp" \
443 --susr="$susr" --sgrp="$sgrp" \
444 --musr="$musr" --mgrp="$mgrp" \
445 --rusr="$rusr" --rgrp="$rgrp" \
446 --nusr="$nusr" --ngrp="$ngrp" \
447 --suid="$suid" --sgid="$sgid" \
448 --muid="$muid" --mgid="$mgid" \
449 --ruid="$ruid" --rgid="$rgid" \
450 --nuid="$nuid" --ngid="$ngid"`
451 echo "susr=\"$susr\"; export susr" >>.buildenv
452 echo "sgrp=\"$sgrp\"; export sgrp" >>.buildenv
453 echo "musr=\"$musr\"; export musr" >>.buildenv
454 echo "mgrp=\"$mgrp\"; export mgrp" >>.buildenv
455 echo "rusr=\"$rusr\"; export rusr" >>.buildenv
456 echo "rgrp=\"$rgrp\"; export rgrp" >>.buildenv
457 echo "nusr=\"$nusr\"; export nusr" >>.buildenv
458 echo "ngrp=\"$ngrp\"; export ngrp" >>.buildenv
459 echo "suid=\"$suid\"; export suid" >>.buildenv
460 echo "sgid=\"$sgid\"; export sgid" >>.buildenv
461 echo "muid=\"$muid\"; export muid" >>.buildenv
462 echo "mgid=\"$mgid\"; export mgid" >>.buildenv
463 echo "ruid=\"$ruid\"; export ruid" >>.buildenv
464 echo "rgid=\"$rgid\"; export rgid" >>.buildenv
465 echo "nuid=\"$nuid\"; export nuid" >>.buildenv
466 echo "ngid=\"$ngid\"; export ngid" >>.buildenv
467
468 # display verbosity header
469 set +x; VERBOSE "PREPARATION: Determine OpenPKG Instance Environment"; set -x
470
471 # determine installation location id
472 if [ ".%{?l_tag_fmt:set}" = .set ]; then
473 tag="%{l_tag_fmt}"
474 else
475 tag="<compat>"
476 fi
477 echo "tag=\"$tag\"; export tag" >>.buildenv
478
479 # determine platform id
480 s=`(uname -s) 2>/dev/null` || s='Unknown'
481 r=`(uname -r) 2>/dev/null` || r='0.0'
482 plid="${s}/${r}"
483 echo "plid=\"$plid\"; export plid" >>.buildenv
484
485 # determine platform-specific build environment
486 case $plid in
487 FreeBSD/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
488 NetBSD/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
489 Linux/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
490 SunOS/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
491 UnixWare/*) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
492 AIX/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin:/usr/ccs/bin" ;;
493 Darwin/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
494 OSF1/V5.* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
495 HP-UX/* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
496 IRIX*/6.* ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
497 * ) l_build_path="/bin:/sbin:/usr/bin:/usr/sbin" ;;
498 esac
499 case $plid in
500 FreeBSD/* ) l_build_ldlp="/lib:/usr/lib" ;;
501 NetBSD/* ) l_build_ldlp="/lib:/usr/lib" ;;
502 Linux/* ) l_build_ldlp="/lib:/usr/lib" ;;
503 SunOS/* ) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
504 UnixWare/*) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
505 AIX/* ) l_build_ldlp="/usr/lib:/usr/ccs/lib" ;;
506 Darwin/* ) l_build_ldlp="/usr/lib" ;;
507 OSF1/V5.* ) l_build_ldlp="/usr/lib" ;;
508 HP-UX/* ) l_build_ldlp="/usr/lib" ;;
509 IRIX*/6.* ) l_build_ldlp="/usr/lib" ;;
510 * ) l_build_ldlp="/usr/lib" ;;
511 esac
512 case $plid in
513 * ) l_build_ulim=":" ;;
514 esac
515 echo "l_build_path=\"$l_build_path\"; export l_build_path" >>.buildenv
516 echo "l_build_ldlp=\"$l_build_ldlp\"; export l_build_ldlp" >>.buildenv
517 echo "l_build_ulim=\"$l_build_ulim\"; export l_build_ulim" >>.buildenv
518
519 # display verbosity header
520 set +x; VERBOSE "PREPARATION: Build GNU gzip (Compression Tool)"; set -x
521
522 # bootstrap GNU zip tool
523 ${l_tar} xf `SOURCE gzip-%{V_gzip}.tar` 2>/dev/null || true
524 ${l_tar} xf `SOURCE gzip-%{V_gzip}-openpkg-r%{V_gzip_r}.tar` 2>/dev/null || true
525 ( cd gzip-%{V_gzip}
526 echo "ac_cv_prog_cc_g=no" >config.cache
527 case $plid in
528 Darwin/* ) echo "gzip_cv_assembler=no" >>config.cache ;;
529 esac
530 sh $shtool subst -e 's/futimens/gzip_&/' gzip.c lib/utimens.[ch]
531 CC="${l_cc}" \
532 GREP="grep" \
533 ./configure \
534 --cache-file=./config.cache
535 ${l_make} || exit $?
536 ( mv gzip ..; ${l_make} clean || true; mv ../gzip . ) || exit $?
537 ) || exit $?
538 l_gzip="`pwd`/gzip-%{V_gzip}/gzip"; export l_gzip
539 echo "l_gzip=\"$l_gzip\"; export l_gzip" >>.buildenv
540
541 # display verbosity header
542 set +x; VERBOSE "PREPARATION: Unpack GNU configuration guessing utilities"; set -x
543
544 # unpack GNU config.guess
545 ${l_gzip} -dc `SOURCE config-%{V_config}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
546
547 # display verbosity header
548 set +x; VERBOSE "PREPARATION: Build GNU patch (Source Patching Tool)"; set -x
549
550 # bootstrap GNU patch tool
551 ${l_gzip} -dc `SOURCE patch-%{V_patch}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
552 ( cd patch-%{V_patch}
553 chmod u+w config.guess config.sub >/dev/null 2>&1 || true
554 cp ../config/config.guess .
555 cp ../config/config.sub .
556 ( echo 'ac_cv_func_setmode=${ac_cv_func_setmode=no}'
557 echo 'ac_cv_prog_cc_g=no'
558 false=`sh $shtool path false`
559 echo "ac_cv_path_ed_PROGRAM=\${ac_cv_path_ed_PROGRAM=$false}"
560 ) >config.cache
561 CC="${l_cc}" \
562 ./configure \
563 --cache-file=./config.cache \
564 --disable-largefile
565 ${l_make} || exit $?
566 ( mv patch ..; ${l_make} clean || true; mv ../patch . ) || exit $?
567 ) || exit $?
568 l_patch="`pwd`/patch-%{V_patch}/patch"; export l_patch
569 echo "l_patch=\"$l_patch\"; export l_patch" >>.buildenv
570
571 # display verbosity header
572 set +x; VERBOSE "BUILD: Build GNU tar (Archiving Tool)"; set -x
573
574 # build GNU tar tool
575 ${l_gzip} -dc `SOURCE tar-%{V_tar}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
576 ( cd tar-%{V_tar}
577 ${l_patch} -p0 <`SOURCE tar.patch`
578 ( echo 'am_cv_func_iconv=no'
579 echo 'am_cv_lib_iconv=no'
580 echo 'ac_cv_lib_iconv_iconv=no'
581 echo 'ac_cv_header_iconv_h=no'
582 echo 'ac_cv_type_iconv_t=no'
583 ) >config.cache
584 CC="${l_cc}" \
585 MAKEINFO="true" \
586 GREP="grep" \
587 ./configure \
588 --cache-file=./config.cache \
589 --prefix=%{l_prefix} \
590 --disable-nls
591 ${l_make} || exit $?
592 ( mv src/tar ..; ${l_make} clean || true; mv ../tar . ) || exit $?
593 ) || exit $?
594 l_tar="`pwd`/tar-%{V_tar}/tar"; export l_tar
595 echo "l_tar=\"$l_tar\"; export l_tar" >>.buildenv
596
597 # display verbosity header
598 set +x; VERBOSE "PREPARATION: Unpack Distribution Tarballs"; set -x
599
600 # unpack distribution tarballs
601 ${l_gzip} -dc `SOURCE rpm-%{V_rpm}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
602 ${l_gzip} -dc `SOURCE zlib-%{V_zlib}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
603 ${l_gzip} -dc `SOURCE bzip2-%{V_bzip2}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
604 ${l_gzip} -dc `SOURCE curl-%{V_curl}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
605 ${l_gzip} -dc `SOURCE make-%{V_make}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
606 ${l_gzip} -dc `SOURCE bash-%{V_bash}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
607 ${l_gzip} -dc `SOURCE uuid-%{V_uuid}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
608 ${l_gzip} -dc `SOURCE beecrypt-%{V_beecrypt}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
609 ${l_gzip} -dc `SOURCE openpkg-registry-%{V_registry}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
610 ${l_gzip} -dc `SOURCE perl-%{V_perl}-mini.tar.gz` | ${l_tar} xf - 2>/dev/null || true
611 ${l_gzip} -dc `SOURCE openssl-%{V_openssl}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
612 ${l_gzip} -dc `SOURCE openpkg-tools-%{V_tools}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
613 ${l_gzip} -dc `SOURCE openpkg-executable-%{V_exec}.tar.gz` | ${l_tar} xf - 2>/dev/null || true
614
615 # update config.guess/config.sub
616 for dir in rpm-%{V_rpm} rpm-%{V_rpm}/popt beecrypt-%{V_beecrypt} \
617 curl-%{V_curl} make-%{V_make} bash-%{V_bash}/support; do
618 chmod u+w $dir/config.guess $dir/config.sub >/dev/null 2>&1 || true
619 cp config/config.guess $dir/
620 cp config/config.sub $dir/
621 done
622
623 # display verbosity header
624 set +x; VERBOSE "PREPARATION: Apply OpenPKG Patches to Distributions"; set -x
625
626 # apply OpenPKG patches to distribution trees
627 ( cd rpm-%{V_rpm}
628 sed -e "s;@l_prefix@;%{l_prefix};g" <`SOURCE rpm.patch.bugfix` | ${l_patch} -p0
629 sed -e "s;@l_prefix@;%{l_prefix};g" <`SOURCE rpm.patch.feature` | ${l_patch} -p0
630 sed -e "s;@l_prefix@;%{l_prefix};g" <`SOURCE rpm.patch.porting` | ${l_patch} -p0
631 sed -e "s;@l_prefix@;%{l_prefix};g" <`SOURCE rpm.patch.regen` | ${l_patch} -p0
632 rm -rf db/docs # just reduce disk size of source tree
633 ) || exit $?
634 ( cd make-%{V_make}
635 ${l_patch} -p0 <`SOURCE make.patch`
636 ) || exit $?
637 ( cd bash-%{V_bash}
638 ${l_patch} -p0 <`SOURCE bash.patch`
639 sleep 1
640 touch y.tab.[ch]
641 touch configure config.h.in
642 ) || exit $?
643 ( cd beecrypt-%{V_beecrypt}
644 ${l_patch} -p0 <`SOURCE beecrypt.patch`
645 ) || exit $?
646 ( cd perl-%{V_perl}
647 ${l_patch} -p0 <`SOURCE perl.patch`
648 ) || exit $?
649 ( cd openssl-%{V_openssl}
650 ${l_patch} -p0 <`SOURCE openssl.patch`
651 ) || exit $?
652
653 # display verbosity header
654 set +x; VERBOSE "PREPARATION: Build GNU make (Build Tool)"; set -x
655
656 # bootstrap GNU make tool
657 ( cd make-%{V_make}
658 CC="${l_cc}" \
659 ./configure \
660 --without-libiconv-prefix \
661 --without-libintl-prefix \
662 --disable-nls \
663 --disable-largefile
664 ${l_make}
665 ( mv make ..; ${l_make} clean || true; mv ../make . ) || exit $?
666 ) || exit $?
667 l_make="`pwd`/make-%{V_make}/make"; export l_make
668 echo "l_make=\"$l_make\"; export l_make" >>.buildenv
669
670 %build
671 # skip in bootstrap phase 2 (see openpkg.boot)
672 [ ".$OPENPKG_BOOT" = .1 ] && exit 0
673
674 # switch into a temporary build area
675 cd openpkg-%{version}
676 . ./.buildenv
677
678 # display verbosity header
679 set +x; VERBOSE "BUILD: Build GNU bash (Bourne-Again Shell)"; set -x
680
681 # build GNU bash tool
682 ( cd bash-%{V_bash}
683 sh $shtool subst \
684 -e 's;@l_openpkg_release@;OpenPKG;' \
685 version.c
686 ( # force disabled wide-character support
687 echo "ac_cv_header_wchar_h=no"
688 echo "ac_cv_header_wctype_h=no"
689 echo "ac_cv_func_mbsrtowcs=no"
690 # force disabled internationalization support
691 echo "ac_cv_header_libintl_h=no"
692 echo "ac_cv_func_gettext=no"
693 echo "ac_cv_func_textdomain=no"
694 echo "ac_cv_func_bindtextdomain=no"
695 echo "ac_cv_lib_intl_bindtextdomain=no"
696 # disable building with debug symbols
697 echo "ac_cv_prog_cc_g=no"
698 ) >config.cache
699 AUTOCONF="true" \
700 CC="${l_cc}"
701 ./configure \
702 --cache-file=./config.cache \
703 --prefix=%{l_prefix} \
704 --without-curses \
705 --without-gnu-malloc \
706 --disable-nls
707 ${l_make} || exit $?
708 ( mv bash ..; ${l_make} clean || true; mv ../bash . ) || exit $?
709 ) || exit $?
710
711 # display verbosity header
712 set +x; VERBOSE "BUILD: Build GNU bzip2 (Compression Library)"; set -x
713
714 # build BZIP2 library
715 ( cd bzip2-%{V_bzip2}
716 ${l_make} CC="${l_cc}" CFLAGS="-O" libbz2.a bzip2 || exit $?
717 ( echo "# libbz2.la - a libtool library file"
718 echo "# Generated by ltmain.sh - GNU libtool x.x.x"
719 echo "dlname=''"
720 echo "library_names=''"
721 echo "old_library='libbz2.a'"
722 echo "dependency_libs=''"
723 echo "current=0"
724 echo "age=0"
725 echo "revision=0"
726 echo "installed=no"
727 echo "dlopen=''"
728 echo "dlpreopen=''"
729 echo "libdir='%{l_prefix}'"
730 ) >libbz2.la
731 ln -s . .libs
732 ) || exit $?
733
734 # display verbosity header
735 set +x; VERBOSE "BUILD: Build Zlib (Compression Library)"; set -x
736
737 # build ZLIB library
738 ( cd zlib-%{V_zlib}
739 CC="${l_cc}" CFLAGS="-O" ./configure
740 ${l_make} CC="${l_cc}" libz.a || exit $? # intentionally do not pass CFLAGS here
741 ) || exit $?
742
743 # display verbosity header
744 set +x; VERBOSE "BUILD: Build OSSP uuid (UUID Generation Tool)"; set -x
745
746 # build OSSP uuid tool
747 ( cd uuid-%{V_uuid}
748 CC="${l_cc}" \
749 CFLAGS="-O" \
750 GREP="grep" \
751 ./configure \
752 --prefix=%{l_prefix} \
753 --disable-shared
754 ${l_make} || exit $?
755 ( mv uuid ..; ${l_make} clean || true; mv ../uuid . ) || exit $?
756 ) || exit $?
757
758 # display verbosity header
759 set +x; VERBOSE "BUILD: Build Perl (Programming Language)"; set -x
760
761 # build Perl tool
762 ( cd perl-%{V_perl}
763 chmod -R u+w .
764 sh $shtool subst \
765 -e 's;\(.*for thislib in $libswanted.*\);libswanted=`echo " $libswanted " | sed -e "s/ bind / /g" -e "s/ db / /g" -e "s/ gdbm / /g" -e "s/ iconv / /g"`\; \1;' \
766 -e 's;package=perl5;package=perl;' \
767 Configure
768 sh $shtool subst \
769 -e 's; */usr/local/lib;;' \
770 hints/freebsd.sh hints/netbsd.sh
771 libdirs=""
772 for dir in %{l_prefix}/lib /lib64 /usr/lib64 /lib /usr/lib /usr/ccs/lib; do
773 [ -d $dir ] && libdirs="$libdirs $dir"
774 done
775 ./Configure \
776 -d -e -s \
777 -Dprefix=%{l_prefix} \
778 -Dvendorprefix=%{l_prefix} \
779 -Dinstallprefix=%{l_prefix} \
780 -Dinstallstyle="lib/perl5" \
781 -Dman1dir=%{l_prefix}/man/man1 \
782 -Dman3dir=%{l_prefix}/man/man3 \
783 -Dcc="${l_cc}" -Uoptimize \
784 -Dlocincpth="%{l_prefix}/include" \
785 -Dloclibpth="%{l_prefix}/lib" \
786 -Dldflags="-L""%{l_prefix}/lib" \
787 -Dlibpth="$libdirs" \
788 -Dglibpth="$libdirs" \
789 -Dscriptdir="%{l_prefix}/bin" \
790 -Uinstallusrbinperl \
791 -Adefine:useshrplib='false' \
792 -Ui_malloc -Ui_iconv -Ui_db
793 ${l_make} miniperl || exit $?
794 rm -f *.o >/dev/null 2>&1 || true
795 ) || exit $?
796 l_perl="`pwd`/perl-%{V_perl}/miniperl"; export l_perl
797 echo "l_perl=\"$l_perl\"; export l_perl" >>.buildenv
798
799 # display verbosity header
800 set +x; VERBOSE "BUILD: Build OpenSSL (Crypography and SSL/TLS Toolkit)"; set -x
801
802 # build OpenSSL toolkit
803 ( cd openssl-%{V_openssl}
804 sh $shtool subst \
805 -e 's;-m486;-march=i486;g' \
806 -e 's;BN_LLONG *;;' \
807 Configure
808 sh $shtool subst \
809 -e 's;test "$OSTYPE" = msdosdjgpp;true;' \
810 util/point.sh
811 sh $shtool subst \
812 -e "1s;^.*\$;#!$l_perl;" \
813 Configure `find . -name "*.pl" -print`
814 opts=""
815 case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
816 *-solaris* ) opts="-lnsl -lsocket" ;;
817 esac
818 case `sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-%<sp>"` in
819 amd64-* ) opts="$opts -fPIC" ;;
820 ia64-* ) opts="$opts -fPIC" ;;
821 sparc64-freebsd* ) opts="$opts -fPIC" ;;
822 esac
823 CC="${l_cc}" \
824 PERL="${l_perl}" \
825 ./config \
826 --prefix=%{l_prefix} \
827 no-asm no-shared no-dso \
828 no-zlib no-idea no-threads no-krb5 no-hw \
829 $opts
830 ${l_make} CC="${l_cc}" build_libs build_apps || exit $?
831 ( mkdir lib; cd lib; ln -s ../lib*.a . ) || exit $?
832 ) || exit $?
833
834 # display verbosity header
835 set +x; VERBOSE "BUILD: Build cURL (URL Fetching Tool)"; set -x
836
837 # build cURL tool
838 ( cd curl-%{V_curl}
839 sh $shtool subst \
840 -e '/LINENO: error: C[+]* preprocessor/{N;N;N;N;s/.*/:/;}' \
841 configure
842 ( echo 'ac_cv_header_openssl_engine_h=no'
843 echo 'lt_cv_prog_compiler_c_o_F77=no'
844 echo 'lt_cv_sys_max_cmd_len=100'
845 ) >config.cache
846 CC="${l_cc}" \
847 CFLAGS="-I`pwd`/../zlib-%{V_zlib}" \
848 CPPFLAGS="-I`pwd`/../zlib-%{V_zlib}" \
849 LDFLAGS="-L`pwd`/../zlib-%{V_zlib}" \
850 GREP="grep" \
851 ./configure \
852 --cache-file=./config.cache \
853 --without-libidn \
854 --disable-shared \
855 --disable-thread \
856 --disable-ipv6 \
857 --disable-ldap \
858 --with-zlib=`pwd`/../zlib-%{V_zlib} \
859 --with-ssl=`pwd`/../openssl-%{V_openssl} \
860 --with-ca-bundle=%{l_prefix}/etc/openpkg/openpkg.x509
861 ${l_make} || exit $?
862 ( mv src/curl ..; ${l_make} clean || true; mv ../curl ./src ) || exit $?
863 ) || exit $?
864
865 # display verbosity header
866 set +x; VERBOSE "BUILD: Build BeeCrypt (Cryptography Library)"; set -x
867
868 # build BeeCrypt library
869 ( cd beecrypt-%{V_beecrypt}
870 sh $shtool subst \
871 -e 's;^[ ][ ]*#;#;' \
872 aes.c base64.c blowfish.c entropy.c fips186.c fips186.h md5.c \
873 md5.h mp.c mtprng.c mtprng.h sha1.c sha1.h sha256.c sha256.h timestamp.c
874 sh $shtool subst \
875 -e 's;cppglue\.lo;;g' \
876 -e 's;cppglue\.cxx;;g' \
877 -e '/^CXX = /s;@CXX@;@CC@;g' \
878 Makefile.in
879 sh $shtool subst \
880 -e '/LINENO: error: C[+]* preprocessor/{N;N;N;N;s/.*/:/;}' \
881 configure
882 ( echo 'ac_cv_have_dev_dsp=no'
883 echo 'ac_cv_have_dev_audio=no'
884 echo 'ac_cv_func_gettimeofday=yes'
885 echo 'bc_cv_as_noexecstack=no'
886 ) >config.cache
887 CC="${l_cc}" \
888 CFLAGS="-O" \
889 ./configure \
890 --cache-file=./config.cache \
891 --prefix=%{l_prefix} \
892 --without-cplusplus \
893 --without-java \
894 --without-python \
895 --with-cpu=none \
896 --with-arch=none \
897 --disable-threads \
898 --disable-shared
899 ${l_make} || exit $?
900 cp .libs/libbeecrypt.a .
901 ) || exit $?
902
903 # display verbosity header
904 set +x; VERBOSE "BUILD: Build RPM (RPM Package Manager)"; set -x
905
906 # build RPM
907 ( br=`pwd`
908 cd rpm-%{V_rpm}
909
910 # remove object files accidentally distributed with the RPM tarball
911 rm -f db/build_unix/*.o
912 rm -f db/build_unix/*.lo
913
914 # remove embedded zlib (we are linking with an external one)
915 rm -rf zlib
916
917 # kill Linux-based preconfigured DB header, to allow the Makefiles to
918 # symlink to it the header that is configured for the current system.
919 rm -f rpmdb/db.h
920
921 # make sure we do not trigger Autoconf/Automake tools
922 touch configure
923 touch config.h.in
924
925 # disable running of any Autoconf/Automake tools
926 ACLOCAL=true
927 AUTOCONF=true
928 AUTOMAKE=true
929 AUTOHEADER=true
930 MAKEINFO=true
931 AMTAR=true
932 export ACLOCAL AUTOMAKE AUTOHEADER MAKEINFO AMTAR
933
934 # cheat GNU Autoconf
935 ( echo 'ac_cv_path_MSGFMT=:'
936 echo 'ac_cv_path_GMSGFMT=:'
937 echo 'ac_cv_path_XGETTEXT=:'
938 echo 'ac_cv_path_MSGMERGE=:'
939 echo "ac_cv_path_MKDIR='%{l_prefix}/lib/openpkg/shtool mkdir -f -p -m 755'"
940 echo "ac_cv_path___MKDIR='%{l_prefix}/lib/openpkg/shtool mkdir -f -p -m 755'"
941 echo "ac_cv_path___PYTHON=true"
942 echo "ac_cv_path___DOXYGEN=true"
943 echo "acl_cv_rpath=no"
944 echo "ac_cv_header_getopt_h=no"
945 ) >config.cache
946
947 # provide platform identification
948 os_name=`(uname -s) 2>/dev/null` || os_name='Unknown'
949 os_name=`echo "${os_name}" |\
950 sed -e 's;[^a-zA-Z0-9];;g' |\
951 tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
952
953 # set build tool flags
954 CC="${l_cc}"
955 CPPFLAGS="-DOPENPKG -DOPENPKG_${os_name} -I$br/zlib-%{V_zlib} -I$br/bzip2-%{V_bzip2} -I$br/beecrypt-%{V_beecrypt}"
956 CFLAGS="$CPPFLAGS"
957 LDFLAGS="-L$br/zlib-%{V_zlib} -L$br/bzip2-%{V_bzip2} -L$br/beecrypt-%{V_beecrypt}"
958 LIBS="$LDFLAGS -lz -lbz2 -lbeecrypt"
959 case $os_name in
960 SUNOS* ) LIBS="$LIBS -lresolv" ;;
961 IRIX* ) LIBS="$LIBS -lgen" ;;
962 esac
963 export CC CPPFLAGS CFLAGS LDFLAGS LIBS
964
965 # adjust for BeeCrypt 4.0
966 sh $shtool subst \
967 -e 's;beecrypt\.api\.h;beecrypt.h;g' \
968 rpmio/rpmio_internal.h
969 sh $shtool subst \
970 -e 's;\(rsavrfy(\)\(&dig->rsa_pk\);\1\2.n, \2.e;g' \
971 lib/signature.c
972
973 # configure the package
974 sh ./configure \
975 --cache-file=./config.cache \
976 --prefix=%{l_prefix} \
977 --with-db \
978 --with-glob \
979 --without-python \
980 --without-apidocs \
981 --disable-shared \
982 --disable-rpath \
983 --disable-nls
984
985 # build the package
986 ${l_make}
987 ) || exit $?
988
989 # display verbosity header
990 set +x; VERBOSE "BUILD: Build OpenPKG Frontend (Set-UID Wrapper)"; set -x
991
992 # build "openpkg" executable
993 ( cd openpkg-executable-%{V_exec}
994 ${l_make} \
995 CC="${l_cc}" \
996 OPENPKG_PREFIX="%{l_prefix}" \
997 OPENPKG_SUSR="%{l_susr}" \
998 OPENPKG_MUSR="%{l_musr}"
999 ) || exit $?
1000
1001 %install
1002 # skip in bootstrap phase 2 (see openpkg.boot)
1003 [ ".$OPENPKG_BOOT" = .1 ] && exit 0
1004
1005 # switch into a temporary build area
1006 cd openpkg-%{version}
1007 . ./.buildenv
1008
1009 # display verbosity header
1010 set +x; VERBOSE "INSTALL: Create Installation Filesystem Hierarchy"; set -x
1011
1012 # create installation hierarchy
1013 rm -rf $RPM_BUILD_ROOT
1014 sh $shtool mkdir -f -p -m 755 $RPM_BUILD_ROOT%{l_prefix}
1015 for dir in bin etc include info lib libexec man sbin share var cgi pub local; do
1016 test -d $RPM_BUILD_ROOT%{l_prefix}/$dir || \
1017 mkdir $RPM_BUILD_ROOT%{l_prefix}/$dir
1018 done
1019 for i in 1 2 3 4 5 6 7 8 9; do
1020 test -d $RPM_BUILD_ROOT%{l_prefix}/man/man$i || \
1021 mkdir $RPM_BUILD_ROOT%{l_prefix}/man/man$i
1022 test -d $RPM_BUILD_ROOT%{l_prefix}/man/cat$i || \
1023 mkdir $RPM_BUILD_ROOT%{l_prefix}/man/cat$i
1024 done
1025 for dir in PKG bin etc include info lib man sbin; do
1026 test -d $RPM_BUILD_ROOT%{l_prefix}/local/$dir || \
1027 mkdir $RPM_BUILD_ROOT%{l_prefix}/local/$dir
1028 done
1029 for i in 1 2 3 4 5 6 7 8 9; do
1030 test -d $RPM_BUILD_ROOT%{l_prefix}/local/man/man$i || \
1031 mkdir $RPM_BUILD_ROOT%{l_prefix}/local/man/man$i
1032 test -d $RPM_BUILD_ROOT%{l_prefix}/local/man/cat$i || \
1033 mkdir $RPM_BUILD_ROOT%{l_prefix}/local/man/cat$i
1034 done
1035 test -d $RPM_BUILD_ROOT%{l_prefix}/RPM || \
1036 mkdir $RPM_BUILD_ROOT%{l_prefix}/RPM
1037 for dir in SRC PKG DB TMP; do
1038 test -d $RPM_BUILD_ROOT%{l_prefix}/RPM/$dir || \
1039 mkdir $RPM_BUILD_ROOT%{l_prefix}/RPM/$dir
1040 done
1041 mkdir $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg
1042 mkdir $RPM_BUILD_ROOT%{l_prefix}/include/openpkg
1043
1044 # display verbosity header
1045 set +x; VERBOSE "INSTALL: Installation of RPM"; set -x
1046
1047 # install RPM into installation hierarchy
1048 ( cd rpm-%{V_rpm}
1049 DESTDIR="$RPM_BUILD_ROOT"
1050 export DESTDIR
1051 ${l_make} install
1052 ) || exit $?
1053
1054 # display verbosity header
1055 set +x; VERBOSE "INSTALL: Install Additional Files"; set -x
1056
1057 # add additional development files
1058 cp rpm-%{V_rpm}/misc/glob.h $RPM_BUILD_ROOT%{l_prefix}/include/rpm/
1059 cp zlib-%{V_zlib}/zlib.h $RPM_BUILD_ROOT%{l_prefix}/include/rpm/
1060 cp zlib-%{V_zlib}/zconf.h $RPM_BUILD_ROOT%{l_prefix}/include/rpm/
1061 cp zlib-%{V_zlib}/libz.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmz.a
1062 cp bzip2-%{V_bzip2}/bzlib.h $RPM_BUILD_ROOT%{l_prefix}/include/rpm/
1063 cp bzip2-%{V_bzip2}/libbz2.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmbz2.a
1064 cp beecrypt-%{V_beecrypt}/beecrypt.h $RPM_BUILD_ROOT%{l_prefix}/include/rpm/
1065 cp beecrypt-%{V_beecrypt}/libbeecrypt.a $RPM_BUILD_ROOT%{l_prefix}/lib/librpmbeecrypt.a
1066
1067 # display verbosity header
1068 set +x; VERBOSE "INSTALL: Post-Adjust Installation"; set -x
1069
1070 # post-adjust RPM installation (namespace-clean POPT inclusion)
1071 mv $RPM_BUILD_ROOT%{l_prefix}/lib/libpopt.a \
1072 $RPM_BUILD_ROOT%{l_prefix}/lib/librpmpopt.a
1073 mv $RPM_BUILD_ROOT%{l_prefix}/include/popt.h \
1074 $RPM_BUILD_ROOT%{l_prefix}/include/rpm/popt.h
1075
1076 # move C API into custom locations
1077 mv $RPM_BUILD_ROOT%{l_prefix}/include/rpm \
1078 $RPM_BUILD_ROOT%{l_prefix}/include/openpkg/rpm
1079 mv $RPM_BUILD_ROOT%{l_prefix}/lib/librpm* \
1080 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/
1081
1082 # move rpm tool to custom location
1083 mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpm \
1084 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
1085 mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpm.8 \
1086 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm.8
1087
1088 # move rpm2cpio tool to custom location
1089 mv $RPM_BUILD_ROOT%{l_prefix}/bin/rpm2cpio \
1090 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm2cpio
1091 mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpm2cpio.8 \
1092 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm2cpio.8
1093
1094 # replace symlinks with hardlinks
1095 for entry in rpme:rpmi rpmt:rpmb rpmu:rpmi rpmv:rpmq; do
1096 eval `echo $entry | sed -e 's/^\(.*\):\(.*\)$/dst=\1; src=\2/'`
1097 rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$dst
1098 ln $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$src \
1099 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$dst
1100 done
1101 rm -f $RPM_BUILD_ROOT%{l_prefix}/bin/rpmbuild
1102 ln $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmb \
1103 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmbuild
1104 mv $RPM_BUILD_ROOT%{l_prefix}/man/man8/rpmbuild.8 \
1105 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpmbuild.8
1106
1107 # display verbosity header
1108 set +x; VERBOSE "INSTALL: Stripping Down Installation"; set -x
1109
1110 # strip RPM installation
1111 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/bin/* \
1112 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/* >/dev/null 2>&1 || true
1113 for dir in man/ja man/pl man/ru man/sk src; do
1114 rm -rf $RPM_BUILD_ROOT%{l_prefix}/$dir >/dev/null 2>&1 || true
1115 done
1116 rm -rf $RPM_BUILD_ROOT/var >/dev/null 2>&1 || true
1117 for file in rpme rpmi rpmsign rpmu rpmverify rpmquery gendiff; do
1118 rm -f $RPM_BUILD_ROOT%{l_prefix}/bin/$file >/dev/null 2>&1 || true
1119 done
1120 rm -rf $RPM_BUILD_ROOT%{l_prefix}/share/* >/dev/null 2>&1 || true
1121 rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man1/* >/dev/null 2>&1 || true
1122 rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man3/* >/dev/null 2>&1 || true
1123 rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/rpmpopt >/dev/null 2>&1 || true
1124 rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/rpmrc >/dev/null 2>&1 || true
1125 rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/lib*.la >/dev/null 2>&1 || true
1126 rm -rf $RPM_BUILD_ROOT%{l_prefix}/var/lib >/dev/null 2>&1 || true
1127 for file in \
1128 u_pkg.sh vpkg-provides.sh vpkg-provides2.sh rpmdiff.cgi rpmdiff \
1129 perl.prov perl.req mkinstalldirs magic.prov magic.req http.req \
1130 getpo.sh get_magic.pl find-provides find-requires \
1131 find-requires.perl find-req.pl find-provides.perl \
1132 find-prov.pl find-lang.sh cpanflute convertrpmrc.sh check-prereqs \
1133 rpmputtext rpmgettext brp-compress brp-redhat brp-sparc64-linux \
1134 brp-strip brp-strip-shared brp-strip-comment-note rpmrc \
1135 config.guess config.sub check-files; do
1136 rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/$file >/dev/null 2>&1 || true
1137 done
1138
1139 # display verbosity header
1140 set +x; VERBOSE "INSTALL: Install Additional Tools"; set -x
1141
1142 # install lsync tool
1143 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1144 <`SOURCE lsync` \
1145 >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync
1146 chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync
1147 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1148 <`SOURCE dot.lsyncrc` \
1149 >$RPM_BUILD_ROOT%{l_prefix}/local/.lsyncrc
1150 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1151 <`SOURCE lsync.8` \
1152 >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/lsync.8
1153
1154 # install rpm-config tool
1155 ( l_prefix="%{l_prefix}"
1156 l_cc="%{l_cc}"
1157 l_cflags=""
1158 l_cppflags="-DOPENPKG -I${l_prefix}/include/openpkg/rpm -I${l_prefix}/include/openpkg"
1159 l_ldflags="-L${l_prefix}/lib/openpkg"
1160 l_libs="-lrpmbuild -lrpm -lrpmio -lrpmdb -lrpmpopt -lrpmbeecrypt -lrpmbz2 -lrpmz"
1161 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1162 -e "s:@l_cc@:$l_cc:g" \
1163 -e "s:@l_cflags@:$l_cflags:g" \
1164 -e "s:@l_cppflags@:$l_cppflags:g" \
1165 -e "s:@l_ldflags@:$l_ldflags:g" \
1166 -e "s:@l_libs@:$l_libs:g" \
1167 -e "s:@l_version@:%{V_rpm}:g" \
1168 <`SOURCE rpm-config.sh` \
1169 >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config
1170 ) || exit $?
1171 chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config
1172 sed -e "s:RPM_VERSION:%{V_rpm}:g" \
1173 <`SOURCE rpm-config.8` \
1174 >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm-config.8
1175
1176 # install OpenPKG registry commands
1177 ( cd openpkg-registry-%{V_registry}
1178 mv $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm \
1179 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpm
1180 sed -e "s;@l_prefix@;%{l_prefix};g" \
1181 rpm.sh >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
1182 chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rpm
1183 sed -e "s;@l_prefix@;%{l_prefix};g" \
1184 register.sh >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register
1185 chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register
1186 cp register.8 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/register.8
1187 ) || exit $?
1188
1189 # install OpenPKG Tool Chain command subset
1190 ( cd openpkg-tools-%{V_tools}
1191 cp cmd/curl.sh $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/curl.sh
1192 cp cmd/build.pl $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.pl
1193 chmod 644 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.pl
1194 cp cmd/build.8 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/build.8
1195 ) || exit $?
1196
1197 # install RPM extension
1198 ( cd rpm-%{V_rpm}
1199 cp file/file $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/file
1200 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/file
1201 ) || exit $?
1202 ( cd perl-%{V_perl}
1203 cp miniperl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/miniperl
1204 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/miniperl
1205 ) || exit $?
1206 ( cd openssl-%{V_openssl}
1207 cp apps/openssl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openssl
1208 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openssl
1209 ) || exit $?
1210 ( cd curl-%{V_curl}
1211 cp src/curl $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/curl
1212 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/curl
1213 ) || exit $?
1214 ( cd bzip2-%{V_bzip2}
1215 cp bzip2 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bzip2
1216 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bzip2
1217 ) || exit $?
1218 ( cd gzip-%{V_gzip}
1219 cp gzip $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/gzip
1220 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/gzip
1221 ) || exit $?
1222 ( cd patch-%{V_patch}
1223 cp patch $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/patch
1224 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/patch
1225 ) || exit $?
1226 ( cd tar-%{V_tar}
1227 cp tar $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/tar
1228 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/tar
1229 ) || exit $?
1230 ( cd bash-%{V_bash}
1231 cp bash $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bash
1232 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/bash
1233 ) || exit $?
1234 ( cd uuid-%{V_uuid}
1235 cp uuid $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/uuid
1236 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/uuid
1237 ) || exit $?
1238 sed -e "s;@l_prefix@;%{l_prefix};g" \
1239 -e "s;@l_musr@;%{l_musr};g" \
1240 -e "s;@l_mgrp@;%{l_mgrp};g" \
1241 <`SOURCE uuid.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid
1242 chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid
1243 sed -e "s;@l_prefix@;%{l_prefix};g" \
1244 <`SOURCE uuid.8` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/uuid.8
1245 sed -e "s;@l_prefix@;%{l_prefix};g" \
1246 <`SOURCE release.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release
1247 chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release
1248 sed -e "s;@l_prefix@;%{l_prefix};g" \
1249 <`SOURCE release.8` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/release.8
1250 sed -e "s;@l_prefix@;%{l_prefix};g" \
1251 -e "s;@l_musr@;%{l_musr};g" \
1252 -e "s;@l_mgrp@;%{l_mgrp};g" \
1253 <`SOURCE rpmdb` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmdb
1254 chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmdb
1255 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1256 <`SOURCE rpmtool` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmtool
1257 chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmtool
1258
1259 # install OpenPKG tool chain execution frontend and execution wrapper
1260 cp openpkg-executable-%{V_exec}/openpkg $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
1261 ${l_strip} $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
1262 chmod 4775 $RPM_BUILD_ROOT%{l_prefix}/bin/openpkg
1263 sed -e "s;@l_prefix@;%{l_prefix};g" \
1264 <`SOURCE openpkg.sh` >$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openpkg
1265 chmod 755 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/openpkg
1266 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1267 <`SOURCE openpkg.1` \
1268 >$RPM_BUILD_ROOT%{l_prefix}/man/man1/openpkg.1
1269
1270 # install more OpenPKG tool chain commands
1271 sed -e "s;@l_prefix@;%{l_prefix};g" \
1272 <`SOURCE install.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/install
1273 chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/install
1274 sed -e "s;@l_prefix@;%{l_prefix};g" \
1275 <`SOURCE man.sh` >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/man
1276 chmod a+x $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/man
1277
1278 # install an own copy of shtool
1279 cp $shtool $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/shtool
1280 chmod a+x $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/shtool
1281
1282 # display verbosity header
1283 set +x; VERBOSE "INSTALL: Install Configuration Files"; set -x
1284
1285 # install a few README files
1286 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1287 <`SOURCE root.README` \
1288 >$RPM_BUILD_ROOT%{l_prefix}/README
1289 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1290 <`SOURCE local.README` \
1291 >$RPM_BUILD_ROOT%{l_prefix}/local/README
1292
1293 # install Bash environment
1294 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1295 <`SOURCE dot.bashrc` \
1296 >$RPM_BUILD_ROOT%{l_prefix}/.bashrc
1297 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1298 <`SOURCE dot.bash_login` \
1299 >$RPM_BUILD_ROOT%{l_prefix}/.bash_login
1300
1301 # install Run-Command files
1302 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1303 -e "s:@l_susr@:%{l_susr}:g" \
1304 -e "s:@l_musr@:%{l_musr}:g" \
1305 <`SOURCE rc` \
1306 >$RPM_BUILD_ROOT%{l_prefix}/etc/rc
1307 chmod 755 $RPM_BUILD_ROOT%{l_prefix}/etc/rc
1308 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1309 <`SOURCE rc.conf` \
1310 >$RPM_BUILD_ROOT%{l_prefix}/etc/rc.conf
1311 chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.conf
1312 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1313 <`SOURCE rc.func` \
1314 >$RPM_BUILD_ROOT%{l_prefix}/etc/rc.func
1315 chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.func
1316 mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
1317 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1318 -e "s:@l_musr@:%{l_musr}:g" \
1319 <`SOURCE rc.openpkg` \
1320 >$RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/rc.openpkg
1321 chmod 755 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/rc.openpkg
1322 ( echo "#!/bin/sh"
1323 echo "exec %{l_prefix}/etc/rc \${1+\"\$@\"}"
1324 ) >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc
1325 chmod 755 $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc
1326 ln $RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc \
1327 $RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rc
1328 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1329 <`SOURCE rc.8` \
1330 >$RPM_BUILD_ROOT%{l_prefix}/libexec/openpkg/rc.8
1331
1332 # create configuration directory
1333 test -d $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg || \
1334 mkdir $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg
1335
1336 # install platform identification file
1337 sh $shtool platform -n -L -S "" -C "+" -F "%<ap>-any-%<sp>" \
1338 >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/platform
1339 chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/platform
1340
1341 # install UUID configuration file (ghost)
1342 touch $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/uuid
1343 chmod 644 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/uuid
1344
1345 # install registry configuration files (ghost)
1346 touch \
1347 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.conf \
1348 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.prep \
1349 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.tran \
1350 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.util
1351 chmod 644 \
1352 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.conf \
1353 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.prep \
1354 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.tran \
1355 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/register.util
1356
1357 # install default managers configuration file
1358 ( echo "##"
1359 echo "## managers -- OpenPKG Instance Managers"
1360 echo "##"
1361 echo ""
1362 echo "%{l_susr}"
1363 echo "%{l_musr}"
1364 echo ""
1365 ) >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/managers
1366
1367 # install overriding RPM configuration files
1368 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1369 <`SOURCE rpmpopt` \
1370 >>$RPM_BUILD_ROOT%{l_prefix}/lib/openpkg/rpmpopt
1371 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1372 <`SOURCE rpmrc` \
1373 >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmrc
1374 sed -e "s:@l_prefix@:%{l_prefix}:g" \
1375 -e "s:@l_prefix_static@:%{l_prefix}:g" \
1376 -e "s;@l_build_path@;$l_build_path;g" \
1377 -e "s;@l_build_ldlp@;$l_build_ldlp;g" \
1378 -e "s;@l_build_ulim@;$l_build_ulim;g" \
1379 -e "s:@TAG@:$tag:g" \
1380 -e "s:@SUSR@:$susr:g" \
1381 -e "s:@SGRP@:$sgrp:g" \
1382 -e "s:@MUSR@:$musr:g" \
1383 -e "s:@MGRP@:$mgrp:g" \
1384 -e "s:@RUSR@:$rusr:g" \
1385 -e "s:@RGRP@:$rgrp:g" \
1386 -e "s:@NUSR@:$nusr:g" \
1387 -e "s:@NGRP@:$ngrp:g" \
1388 <`SOURCE rpmmacros` \
1389 >$RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/rpmmacros
1390 cp `SOURCE openpkg.org.pgp` \
1391 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.org.pgp
1392 cp `SOURCE openpkg.com.pgp` \
1393 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.com.pgp
1394 cp `SOURCE openpkg.net.pgp` \
1395 $RPM_BUILD_ROOT%{l_prefix}/etc/openpkg/openpkg.net.pgp
1396
1397 # display verbosity header
1398 set +x; VERBOSE "INSTALL: Done. Thank you for flying OpenPKG..."; set -x
1399
1400 %files
1401 %defattr(-,%{?l_musr}%{!?l_musr:%{l_fsusr}},%{?l_mgrp}%{!?l_mgrp:%{l_fsgrp}})
1402 %{l_prefix}/README
1403 %config(noreplace) %{l_prefix}/.bashrc
1404 %config(noreplace) %{l_prefix}/.bash_login
1405 %dir %{l_prefix}/RPM
1406 %dir %{l_prefix}/RPM/SRC
1407 %dir %{l_prefix}/RPM/PKG
1408 %dir %{l_prefix}/RPM/DB
1409 %dir %{l_prefix}/RPM/TMP
1410 %dir %{l_prefix}/cgi
1411 %dir %{l_prefix}/bin
1412 %attr(4755,%{l_susr},%{l_mgrp}) %{l_prefix}/bin/openpkg
1413 %dir %{l_prefix}/etc
1414 %{l_prefix}/etc/rc
1415 %config(noreplace) %{l_prefix}/etc/rc.conf
1416 %{l_prefix}/etc/rc.func
1417 %dir %{l_prefix}/etc/rc.d
1418 %{l_prefix}/etc/rc.d/rc.openpkg
1419 %dir %{l_prefix}/etc/openpkg
1420 %ghost %{l_prefix}/etc/openpkg/uuid
1421 %config %{l_prefix}/etc/openpkg/platform
1422 %config %{l_prefix}/etc/openpkg/rpmmacros
1423 %config %{l_prefix}/etc/openpkg/rpmrc
1424 %ghost %{l_prefix}/etc/openpkg/register.conf
1425 %ghost %{l_prefix}/etc/openpkg/register.prep
1426 %ghost %{l_prefix}/etc/openpkg/register.tran
1427 %ghost %{l_prefix}/etc/openpkg/register.util
1428 %config %attr(664,%{l_musr},%{l_mgrp}) %{l_prefix}/etc/openpkg/managers
1429 %{l_prefix}/etc/openpkg/openpkg.org.pgp
1430 %{l_prefix}/etc/openpkg/openpkg.com.pgp
1431 %{l_prefix}/etc/openpkg/openpkg.net.pgp
1432 %dir %{l_prefix}/include
1433 %dir %{l_prefix}/include/openpkg
1434 %dir %{l_prefix}/include/openpkg/rpm
1435 %{l_prefix}/include/openpkg/rpm/argv.h
1436 %{l_prefix}/include/openpkg/rpm/beecrypt.h
1437 %{l_prefix}/include/openpkg/rpm/bzlib.h
1438 %{l_prefix}/include/openpkg/rpm/db.h
1439 %{l_prefix}/include/openpkg/rpm/fts.h
1440 %{l_prefix}/include/openpkg/rpm/glob.h
1441 %{l_prefix}/include/openpkg/rpm/hdrinline.h
1442 %{l_prefix}/include/openpkg/rpm/header.h
1443 %{l_prefix}/include/openpkg/rpm/misc.h
1444 %{l_prefix}/include/openpkg/rpm/popt.h
1445 %{l_prefix}/include/openpkg/rpm/rpmal.h
1446 %{l_prefix}/include/openpkg/rpm/rpmbuild.h
1447 %{l_prefix}/include/openpkg/rpm/rpmcli.h
1448 %{l_prefix}/include/openpkg/rpm/rpmdb.h
1449 %{l_prefix}/include/openpkg/rpm/rpmds.h
1450 %{l_prefix}/include/openpkg/rpm/rpmerr.h
1451 %{l_prefix}/include/openpkg/rpm/rpmfc.h
1452 %{l_prefix}/include/openpkg/rpm/rpmfi.h
1453 %{l_prefix}/include/openpkg/rpm/rpmfile.h
1454 %{l_prefix}/include/openpkg/rpm/rpmhash.h
1455 %{l_prefix}/include/openpkg/rpm/rpmio.h
1456 %{l_prefix}/include/openpkg/rpm/rpmlib.h
1457 %{l_prefix}/include/openpkg/rpm/rpmlog.h
1458 %{l_prefix}/include/openpkg/rpm/rpmmacro.h
1459 %{l_prefix}/include/openpkg/rpm/rpmmessages.h
1460 %{l_prefix}/include/openpkg/rpm/rpmpgp.h
1461 %{l_prefix}/include/openpkg/rpm/rpmps.h
1462 %{l_prefix}/include/openpkg/rpm/rpmspec.h
1463 %{l_prefix}/include/openpkg/rpm/rpmsw.h
1464 %{l_prefix}/include/openpkg/rpm/rpmte.h
1465 %{l_prefix}/include/openpkg/rpm/rpmts.h
1466 %{l_prefix}/include/openpkg/rpm/rpmurl.h
1467 %{l_prefix}/include/openpkg/rpm/stringbuf.h
1468 %{l_prefix}/include/openpkg/rpm/ugid.h
1469 %{l_prefix}/include/openpkg/rpm/zconf.h
1470 %{l_prefix}/include/openpkg/rpm/zlib.h
1471 %dir %{l_prefix}/info
1472 %dir %{l_prefix}/lib
1473 %dir %{l_prefix}/lib/openpkg
1474 %{l_prefix}/lib/openpkg/bash
1475 %{l_prefix}/lib/openpkg/bzip2
1476 %{l_prefix}/lib/openpkg/curl
1477 %{l_prefix}/lib/openpkg/file
1478 %{l_prefix}/lib/openpkg/gzip
1479 %{l_prefix}/lib/openpkg/librpm.a
1480 %{l_prefix}/lib/openpkg/librpmbeecrypt.a
1481 %{l_prefix}/lib/openpkg/librpmbuild.a
1482 %{l_prefix}/lib/openpkg/librpmbz2.a
1483 %{l_prefix}/lib/openpkg/librpmdb.a
1484 %{l_prefix}/lib/openpkg/librpmio.a
1485 %{l_prefix}/lib/openpkg/librpmpopt.a
1486 %{l_prefix}/lib/openpkg/librpmz.a
1487 %{l_prefix}/lib/openpkg/macros
1488 %{l_prefix}/lib/openpkg/magic
1489 %{l_prefix}/lib/openpkg/magic.mgc
1490 %{l_prefix}/lib/openpkg/magic.mime
1491 %{l_prefix}/lib/openpkg/magic.mime.mgc
1492 %{l_prefix}/lib/openpkg/miniperl
1493 %{l_prefix}/lib/openpkg/openpkg
1494 %{l_prefix}/lib/openpkg/openssl
1495 %{l_prefix}/lib/openpkg/patch
1496 %{l_prefix}/lib/openpkg/rc
1497 %{l_prefix}/lib/openpkg/rpm
1498 %{l_prefix}/lib/openpkg/rpmb
1499 %{l_prefix}/lib/openpkg/rpmd
1500 %{l_prefix}/lib/openpkg/rpmdb
1501 %{l_prefix}/lib/openpkg/rpmdb_dump
1502 %{l_prefix}/lib/openpkg/rpmdb_load
1503 %{l_prefix}/lib/openpkg/rpmdb_verify
1504 %{l_prefix}/lib/openpkg/rpme
1505 %{l_prefix}/lib/openpkg/rpmi
1506 %{l_prefix}/lib/openpkg/rpmk
1507 %{l_prefix}/lib/openpkg/rpmpopt
1508 %{l_prefix}/lib/openpkg/rpmq
1509 %{l_prefix}/lib/openpkg/rpmt
1510 %{l_prefix}/lib/openpkg/rpmtool
1511 %{l_prefix}/lib/openpkg/rpmu
1512 %{l_prefix}/lib/openpkg/rpmv
1513 %{l_prefix}/lib/openpkg/shtool
1514 %{l_prefix}/lib/openpkg/tar
1515 %{l_prefix}/lib/openpkg/uuid
1516 %dir %{l_prefix}/libexec
1517 %dir %{l_prefix}/libexec/openpkg
1518 %{l_prefix}/libexec/openpkg/build.8
1519 %{l_prefix}/libexec/openpkg/build.pl
1520 %{l_prefix}/libexec/openpkg/curl.sh
1521 %{l_prefix}/libexec/openpkg/install
1522 %{l_prefix}/libexec/openpkg/lsync
1523 %{l_prefix}/libexec/openpkg/lsync.8
1524 %{l_prefix}/libexec/openpkg/man
1525 %{l_prefix}/libexec/openpkg/rc
1526 %{l_prefix}/libexec/openpkg/rc.8
1527 %{l_prefix}/libexec/openpkg/register
1528 %{l_prefix}/libexec/openpkg/register.8
1529 %{l_prefix}/libexec/openpkg/release
1530 %{l_prefix}/libexec/openpkg/release.8
1531 %{l_prefix}/libexec/openpkg/rpm
1532 %{l_prefix}/libexec/openpkg/rpm-config
1533 %{l_prefix}/libexec/openpkg/rpm-config.8
1534 %{l_prefix}/libexec/openpkg/rpm.8
1535 %{l_prefix}/libexec/openpkg/rpm2cpio
1536 %{l_prefix}/libexec/openpkg/rpm2cpio.8
1537 %{l_prefix}/libexec/openpkg/rpmbuild
1538 %{l_prefix}/libexec/openpkg/rpmbuild.8
1539 %{l_prefix}/libexec/openpkg/uuid
1540 %{l_prefix}/libexec/openpkg/uuid.8
1541 %dir %{l_prefix}/man
1542 %dir %{l_prefix}/man/man1
1543 %dir %{l_prefix}/man/man2
1544 %dir %{l_prefix}/man/man3
1545 %dir %{l_prefix}/man/man4
1546 %dir %{l_prefix}/man/man5
1547 %dir %{l_prefix}/man/man6
1548 %dir %{l_prefix}/man/man7
1549 %dir %{l_prefix}/man/man8
1550 %dir %{l_prefix}/man/man9
1551 %dir %{l_prefix}/man/cat1
1552 %dir %{l_prefix}/man/cat2
1553 %dir %{l_prefix}/man/cat3
1554 %dir %{l_prefix}/man/cat4
1555 %dir %{l_prefix}/man/cat5
1556 %dir %{l_prefix}/man/cat6
1557 %dir %{l_prefix}/man/cat7
1558 %dir %{l_prefix}/man/cat8
1559 %dir %{l_prefix}/man/cat9
1560 %{l_prefix}/man/man1/openpkg.1
1561 %dir %{l_prefix}/sbin
1562 %dir %{l_prefix}/pub
1563 %dir %{l_prefix}/share
1564 %dir %{l_prefix}/var
1565 %dir %{l_prefix}/local
1566 %{l_prefix}/local/README
1567 %{l_prefix}/local/.lsyncrc
1568 %dir %{l_prefix}/local/PKG
1569 %dir %{l_prefix}/local/bin
1570 %dir %{l_prefix}/local/etc
1571 %dir %{l_prefix}/local/include
1572 %dir %{l_prefix}/local/info
1573 %dir %{l_prefix}/local/lib
1574 %dir %{l_prefix}/local/man
1575 %dir %{l_prefix}/local/man/man1
1576 %dir %{l_prefix}/local/man/man2
1577 %dir %{l_prefix}/local/man/man3
1578 %dir %{l_prefix}/local/man/man4
1579 %dir %{l_prefix}/local/man/man5
1580 %dir %{l_prefix}/local/man/man6
1581 %dir %{l_prefix}/local/man/man7
1582 %dir %{l_prefix}/local/man/man8
1583 %dir %{l_prefix}/local/man/man9
1584 %dir %{l_prefix}/local/man/cat1
1585 %dir %{l_prefix}/local/man/cat2
1586 %dir %{l_prefix}/local/man/cat3
1587 %dir %{l_prefix}/local/man/cat4
1588 %dir %{l_prefix}/local/man/cat5
1589 %dir %{l_prefix}/local/man/cat6
1590 %dir %{l_prefix}/local/man/cat7
1591 %dir %{l_prefix}/local/man/cat8
1592 %dir %{l_prefix}/local/man/cat9
1593 %dir %{l_prefix}/local/sbin
1594
1595 %clean
1596 # skip in bootstrap phase 2 (see openpkg.boot)
1597 [ ".$OPENPKG_BOOT" = .1 ] && exit 0
1598
1599 # cleanup build area
1600 rm -rf openpkg-%{version} >/dev/null 2>&1 || true
1601
1602 # cleanup installation area
1603 rm -rf $RPM_BUILD_ROOT >/dev/null 2>&1 || true
1604
1605 %pre
1606 # always performed for upgrades and because it doesn't harm!
1607 # [ ".$1" != .1 ] && exit 0
1608
1609 # this procedure is only usable with root privileges
1610 # (for non-root installations it is not required at all)
1611 cusr=`(id -un) 2>/dev/null ||\
1612 (id | sed -e 's;^[^(]*(\([^)]*\)).*;\1;') 2>/dev/null ||\
1613 (whoami) 2>/dev/null ||\
1614 (who am i | cut "-d " -f1) 2>/dev/null ||\
1615 echo $LOGNAME`
1616
1617 # determine runtime details (for both inside and outside RPM!!)
1618 # - bootstrapping: $xxx is set from aux.wrapbin.sh
1619 # - upgrading new: %{l_[smrn]{usr,grp}} is set via rpmmacros
1620 # - upgrading old: %{l_[smrn]{usr,grp}} is not set at all
1621 [ ".$susr" = . ] && susr="%{?l_susr}%{!?l_susr:root}"
1622 [ ".$sgrp" = . ] && sgrp="%{?l_sgrp}%{!?l_sgrp:wheel}"
1623 [ ".$musr" = . ] && musr="%{?l_musr}%{!?l_musr:%{l_fsusr}}"
1624 [ ".$mgrp" = . ] && mgrp="%{?l_mgrp}%{!?l_mgrp:%{l_fsgrp}}"
1625 [ ".$rusr" = . ] && rusr="%{?l_rusr}%{!?l_rusr:%{l_fsusr}-r}"
1626 [ ".$rgrp" = . ] && rgrp="%{?l_rgrp}%{!?l_rgrp:%{l_fsgrp}-r}"
1627 [ ".$nusr" = . ] && nusr="%{?l_nusr}%{!?l_nusr:%{l_fsusr}-n}"
1628 [ ".$ngrp" = . ] && ngrp="%{?l_ngrp}%{!?l_ngrp:%{l_fsgrp}-n}"
1629 [ ".$suid" = . ] && suid="%{?l_suid}"
1630 [ ".$sgid" = . ] && sgid="%{?l_sgid}"
1631 [ ".$muid" = . ] && muid="%{?l_muid}"
1632 [ ".$mgid" = . ] && mgid="%{?l_mgid}"
1633 [ ".$ruid" = . ] && ruid="%{?l_ruid}"
1634 [ ".$rgid" = . ] && rgid="%{?l_rgid}"
1635 [ ".$nuid" = . ] && nuid="%{?l_nuid}"
1636 [ ".$ngid" = . ] && ngid="%{?l_ngid}"
1637
1638 # if any of these optional params are not used we won't have a
1639 # corresponding macro either, so make use of one conditionally
1640 [ ".$suid" = . ] && [ ".%{?l_suid:set}" = .set ] && suid="%{?l_suid}"
1641 [ ".$sgid" = . ] && [ ".%{?l_sgid:set}" = .set ] && sgid="%{?l_sgid}"
1642 [ ".$muid" = . ] && [ ".%{?l_muid:set}" = .set ] && muid="%{?l_muid}"
1643 [ ".$mgid" = . ] && [ ".%{?l_mgid:set}" = .set ] && mgid="%{?l_mgid}"
1644 [ ".$ruid" = . ] && [ ".%{?l_ruid:set}" = .set ] && ruid="%{?l_ruid}"
1645 [ ".$rgid" = . ] && [ ".%{?l_rgid:set}" = .set ] && rgid="%{?l_rgid}"
1646 [ ".$nuid" = . ] && [ ".%{?l_nuid:set}" = .set ] && nuid="%{?l_nuid}"
1647 [ ".$ngid" = . ] && [ ".%{?l_ngid:set}" = .set ] && ngid="%{?l_ngid}"
1648
1649 # determine prefix
1650 [ ".$prefix" = . ] && prefix="%{l_prefix}"
1651 prefix=`echo "$prefix" | sed -e 's;//*;/;g' -e 's;/$;;'`
1652
1653 # register instance in presence file
1654 presence="/etc/openpkg"
1655 exists=`cat $presence 2>/dev/null | egrep "^ *${prefix} *\$"`
1656 if [ ".$exists" = . ]; then
1657 ( umask 022
1658 echo "${prefix}" >>$presence
1659 ) 2>/dev/null || true
1660 fi
1661
1662 # determine user/group ids
1663 for class in s m r n; do
1664 eval "xusr=\"\$${class}usr\""
1665 eval "xgrp=\"\$${class}grp\""
1666 eval "xuid=\"\$${class}uid\""
1667 eval "xgid=\"\$${class}gid\""
1668 if [ ".$xuid" = . ]; then
1669 xuid=`(getent passwd "${xusr}"; \
1670 grep "^${xusr}:" /etc/passwd; \
1671 ypmatch "${xusr}" passwd; \
1672 nismatch "${xusr}" passwd; \
1673 nidump passwd . | grep "^${xusr}:") 2>/dev/null | \
1674 sed -e 'q' | awk -F: '{ print $3; }'`
1675 if [ ".$xuid" = . ]; then
1676 # seek for a reasonably uid/gid pair
1677 xuid=1000
1678 ok=0
1679 while [ ".$ok" = .0 ]; do
1680 eval "u_exists=\$u_exists_$xuid"
1681 if [ ".$u_exists" = . ]; then
1682 u_exists=`(getent passwd; cat /etc/passwd; ypcat passwd; niscat passwd; nidump passwd .) 2>/dev/null |\
1683 grep "^[^:]*:[^:]*:$xuid:"`
1684 fi
1685 eval "g_exists=\$g_exists_$xuid"
1686 if [ ".$g_exists" = . ]; then
1687 g_exists=`(getent group; cat /etc/group; ypcat group; niscat group; nidump group .) 2>/dev/null |\
1688 grep "^[^:]*:[^:]*:$xuid:"`
1689 fi
1690 if [ ".$u_exists" = . -a ".$g_exists" = . ]; then
1691 ok=1
1692 break
1693 fi
1694 xuid=`expr $xuid + 1`
1695 done
1696 eval "u_exists_$xuid=yes"
1697 eval "g_exists_$xuid=yes"
1698 fi
1699 fi
1700 if [ ".$xgid" = . ]; then
1701 xgid=`(getent group "${xgrp}"; \
1702 grep "^${xgrp}:" /etc/group; \
1703 ypmatch "${xgrp}" group; \
1704 nismatch "${xgrp}" group; \
1705 nidump group . | grep "^${xgrp}:") 2>/dev/null | \
1706 sed -e 'q' | awk -F: '{ print $3; }'`
1707 if [ ".$xgid" = . ]; then
1708 xgid="$xuid"
1709 fi
1710 fi
1711 eval "${class}uid=\"$xuid\""
1712 eval "${class}gid=\"$xgid\""
1713 done
1714
1715 # determine platform id
1716 s=`(uname -s) 2>/dev/null` || s='Unknown'
1717 r=`(uname -r) 2>/dev/null` || r='0.0'
1718 plid="${s}/${r}"
1719
1720 # add entry to /etc/shells
1721 shell="${prefix}/lib/openpkg/bash"
1722 if [ -f /etc/shells ]; then
1723 exists=`cat /etc/shells 2>/dev/null | grep "^$shell"`
1724 if [ ".$exists" = . ]; then
1725 if [ ".$cusr" != ".root" ]; then
1726 echo "openpkg:WARNING: skipping addition of $shell to /etc/shells" 1>&2
1727 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
1728 else
1729 echo "${shell}" >>/etc/shells
1730 fi
1731 fi
1732 fi
1733
1734 # clear pending deferred actions
1735 rm -f %{l_prefix}.pre-group-process.sh %{l_prefix}.pre-post-process.sh >/dev/null 2>&1
1736
1737 # create the hierarchy user/group
1738 for req in "superuser:${susr}:${suid}:${sgrp}:${sgid}" \
1739 "management:${musr}:${muid}:${mgrp}:${mgid}" \
1740 "restricted:${rusr}:${ruid}:${rgrp}:${rgid}" \
1741 "non-privileged:${nusr}:${nuid}:${ngrp}:${ngid}"; do
1742 # split request into class/usr/uid/grp/gid
1743 OIFS="$IFS"; IFS=":"; set -- $req; IFS="$OIFS"
1744 class="$1"; usr="$2"; uid="$3"; grp="$4"; gid="$5"
1745
1746 # check whether user already exists
1747 exists=`(getent passwd "$usr"; \
1748 grep "^$usr:" /etc/passwd; \
1749 ypmatch "$usr" passwd; \
1750 nismatch "$usr" passwd; \
1751 nidump passwd . | grep "^$usr:") 2>/dev/null | \
1752 sed -e 'q'`
1753 if [ ".$exists" = . ]; then
1754 if [ ".$cusr" != ".root" ]; then
1755 echo "openpkg:WARNING: skipping creation of OpenPKG $class user $usr" 1>&2
1756 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
1757 else
1758 # add entry to passwd database
1759 realname="${prefix} OpenPKG ($class)"
1760 case "$plid" in
1761 FreeBSD/* | NetBSD/* )
1762 file=/etc/master.passwd
1763 entry="${usr}:*:${uid}:${gid}::0:0:${realname}:${prefix}:${shell}"
1764 update="(PATH=\$PATH:/usr/sbin; pwd_mkdb -p /etc/master.passwd)"
1765 ;;
1766 Linux/* )
1767 file=/etc/passwd
1768 entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
1769 update="(PATH=\$PATH:/usr/sbin; pwconv)"
1770 ;;
1771 SunOS/5.* | UnixWare/* )
1772 file=/etc/passwd
1773 entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
1774 update="(PATH=\$PATH:/usr/sbin; pwconv)"
1775 ;;
1776 AIX/* )
1777 # intentionally do nothing here
1778 :
1779 ;;
1780 OSF1/V5.* )
1781 file=/etc/passwd
1782 entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
1783 update="(PATH=\$PATH:/usr/sbin; mkpasswd /etc/passwd)"
1784 ;;
1785 HP-UX/* )
1786 file=/etc/passwd
1787 entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
1788 update=":"
1789 ;;
1790 Darwin/* )
1791 # intentionally do nothing here
1792 :
1793 ;;
1794 IRIX*/6.* )
1795 file=/etc/passwd
1796 entry="${usr}:*:${uid}:${gid}:${realname}:${prefix}:${shell}"
1797 if [ -f /etc/shadow ]
1798 then update="(PATH=\$PATH:/sbin; pwconv)"
1799 else update=":"
1800 fi
1801 ;;
1802 esac
1803 case "$plid" in
1804 Darwin/* )
1805 niutil -create . "/users/${usr}"
1806 niutil -createprop . "/users/${usr}" passwd "*"
1807 niutil -createprop . "/users/${usr}" uid "${uid}"
1808 niutil -createprop . "/users/${usr}" gid "${gid}"
1809 niutil -createprop . "/users/${usr}" realname "${realname}"
1810 niutil -createprop . "/users/${usr}" home "${prefix}"
1811 niutil -createprop . "/users/${usr}" shell "${shell}"
1812 ;;
1813 AIX/* )
1814 mkuser id="${uid}" gecos="${realname}" home="${prefix}" "${usr}"
1815 cp /etc/security/login.cfg /etc/security/login.cfg.bak && \
1816 sed -e "/^usw:/,/^[^ ]/s;\\( *shells =.*\\) *\$;\\1,$shell;" \
1817 </etc/security/login.cfg.bak >/etc/security/login.cfg && \
1818 rm -f /etc/security/login.cfg.bak >/dev/null 2>&1
1819 # defer both the setting of the primary group and the shell,
1820 # as they do not exist at this stage of processing.
1821 echo "chuser pgrp=\"${grp}\" \"${usr}\"" >>%{l_prefix}.pre-group-process.sh
1822 echo "chuser shell=\"${shell}\" \"${usr}\"" >>%{l_prefix}.pre-post-process.sh
1823 ;;
1824 * )
1825 cp $file $file.bak && \
1826 (grep -v '^+:' $file.bak; echo $entry; grep '^+:' $file.bak) >$file
1827 rm -f $file.bak >/dev/null 2>&1
1828 eval $update
1829 [ $? -ne 0 ] && exit $?
1830 ;;
1831 esac
1832 fi
1833 fi
1834
1835 # check whether group already exists
1836 exists=`(getent group "$grp"; \
1837 grep "^$grp:" /etc/group; \
1838 ypmatch "$grp" group; \
1839 nismatch "$grp" group; \
1840 nidump group . | grep "^$grp:") 2>/dev/null | \
1841 sed -e 'q'`
1842 if [ ".$exists" = . ]; then
1843 if [ ".$cusr" != ".root" ]; then
1844 echo "openpkg:WARNING: skipping creation of OpenPKG $class group $grp" 1>&2
1845 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
1846 else
1847 case "$plid" in
1848 Darwin/* )
1849 niutil -create . "/groups/${grp}"
1850 niutil -createprop . "/groups/${grp}" gid "${gid}"
1851 niutil -createprop . "/groups/${grp}" users "${usr}"
1852 ;;
1853 AIX/* )
1854 mkgroup id="${gid}" users="${usr}" "${grp}"
1855 ;;
1856 * )
1857 # add entry to group database
1858 file=/etc/group
1859 entry="${grp}:*:${gid}:${usr}"
1860 cp $file $file.bak && \
1861 (grep -v '^+:' $file.bak; echo $entry; grep '^+:' $file.bak) >$file
1862 rm -f $file.bak >/dev/null 2>&1
1863 ;;
1864 esac
1865 fi
1866 fi
1867 done
1868
1869 # optional group processing (deferred adjustment of primary group)
1870 if [ -f %{l_prefix}.pre-group-process.sh ]; then
1871 sh %{l_prefix}.pre-group-process.sh
1872 rm -f %{l_prefix}.pre-group-process.sh
1873 fi
1874
1875 # invalidate passwd and group tables from Name Service Cache Daemon to
1876 # ensure chown/chgrp works immediately after pwconv on Linux and Solaris
1877 if [ -x /usr/sbin/nscd ]; then
1878 /usr/sbin/nscd -i passwd >/dev/null 2>&1 || true
1879 /usr/sbin/nscd -i group >/dev/null 2>&1 || true
1880 fi
1881
1882 # create the startup/shutdown transfer script
1883 name=`echo "$prefix" | sed -e 's;/;;g'`
1884 if [ ".$cusr" != ".root" ]; then
1885 echo "openpkg:WARNING: skipping creation of system run-command hooks" 1>&2
1886 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
1887 else
1888 case "$plid" in
1889 FreeBSD/* )
1890 if [ ! -f /etc/rc.d/openpkg-${name} ]; then
1891 # install transfer script
1892 rm -f /etc/rc.d/openpkg-${name} >/dev/null 2>&1
1893 ( echo "#!/bin/sh"
1894 echo "##"
1895 echo "## openpkg-${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
1896 echo "##"
1897 echo ""
1898 echo "# PROVIDE: openpkg-${name}"
1899 echo "# REQUIRE: LOGIN"
1900 echo "# KEYWORD: shutdown"
1901 echo ""
1902 echo ". /etc/rc.subr"
1903 echo ""
1904 echo "name=\"openpkg_${name}\""
1905 echo "start_cmd=\"openpkg_rc_all start\""
1906 echo "stop_cmd=\"openpkg_rc_all stop\""
1907 echo "restart_cmd=\"openpkg_rc_all stop start\""
1908 echo ""
1909 echo "openpkg_rc_all () {"
1910 echo " if [ -f ${prefix}/etc/rc ]; then"
1911 echo " ${prefix}/etc/rc all \"\$@\""
1912 echo " fi"
1913 echo "}"
1914 echo ""
1915 echo "load_rc_config \$name"
1916 echo "run_rc_command \"\$1\""
1917 echo ""
1918 ) >/etc/rc.d/openpkg-${name}
1919 chmod 755 /etc/rc.d/openpkg-${name}
1920 fi
1921 ;;
1922 NetBSD/* )
1923 if [ ! -f /etc/rc.d/${name} ]; then
1924 ( echo "#!/bin/sh"
1925 echo "##"
1926 echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
1927 echo "##"
1928 echo "## PROVIDE: ${name}"
1929 echo "## REQUIRE: DAEMON LOGIN NETWORK SERVERS"
1930 echo "##"
1931 echo ""
1932 echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
1933 echo "case \$1 in"
1934 echo " start ) exec ${prefix}/etc/rc all start ;;"
1935 echo " stop ) exec ${prefix}/etc/rc all stop ;;"
1936 echo " restart ) exec ${prefix}/etc/rc all stop start ;;"
1937 echo " status ) ;;"
1938 echo "esac"
1939 ) >/etc/rc.d/${name}
1940 chmod 755 /etc/rc.d/${name}
1941 fi
1942 ;;
1943 Linux/* )
1944 if [ -f /etc/gentoo-release ]; then
1945 if [ ! -f /etc/init.d/openpkg-${name} ]; then
1946 # install transfer script
1947 ( echo "#!/sbin/runscript"
1948 echo "##"
1949 echo "## openpkg-${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
1950 echo "##"
1951 echo ""
1952 echo "depend() {"
1953 echo " after *"
1954 echo "}"
1955 echo ""
1956 echo "checkconfig() {"
1957 echo " [ -f ${prefix}/etc/rc ] || return 1"
1958 echo " case $1 in"
1959 echo " start ) exec ${prefix}/etc/rc all start ;;"
1960 echo " stop ) exec ${prefix}/etc/rc all stop ;;"
1961 echo " esac"
1962 echo "}"
1963 echo ""
1964 echo "start() {"
1965 echo " checkconfig || return 1"
1966 echo " ebegin "Starting OpenPKG ${prefix} hierarchy""
1967 echo " exec ${prefix}/etc/rc all start"
1968 echo " eend 0"
1969 echo "}"
1970 echo ""
1971 echo "stop() {"
1972 echo " checkconfig || return 1"
1973 echo " ebegin "Stopping OpenPKG ${prefix} hierarchy""
1974 echo " exec ${prefix}/etc/rc all stop"
1975 echo " eend 0"
1976 echo "}"
1977 ) >/etc/init.d/openpkg-${name}
1978 chmod 755 /etc/init.d/openpkg-${name}
1979 /sbin/rc-update add openpkg-${name} default
1980 fi
1981 else
1982 # sroot: script root directory
1983 # lroot: link root directory
1984 if [ -f /etc/debian_version ]; then
1985 sroot=/etc/init.d
1986 lroot=/etc/rc%d.d
1987 elif [ -f /etc/redhat-release -o -f /etc/mandrake-release ]; then
1988 sroot=/etc/rc.d/init.d
1989 lroot=/etc/rc.d/rc%d.d
1990 elif [ -f /etc/SuSE-release ]; then
1991 sroot=/etc/init.d
1992 lroot=/etc/init.d/rc%d.d
1993 elif [ -f /etc/slackware-version ]; then
1994 sroot=/etc/rc.d
1995 lroot=/etc/rc.d/rc%d.d
1996 name="rc.${name}"
1997 for i in 0 1 2 3 4 5 6; do
1998 l=`echo $lroot | sed -e "s;%d;$i;"`
1999 if [ ! -d $l ]; then
2000 mkdir $l 2>&1 || true
2001 fi
2002 done
2003 else
2004 echo "WARNING: you are not running one of the supported standard" 1>&2
2005 echo "WARNING: Linux platforms (Debian, RedHat, Mandrake, SuSE, Gentoo)." 1>&2
2006 echo "WARNING: Guessing the location of the system init scripts!" 1>&2
2007 sroot=""
2008 lroot=""
2009 for sr in /etc/rc.d/init.d /etc/init.d /sbin/init.d; do
2010 if [ -d $sr ]; then
2011 sroot="$sr"
2012 break
2013 fi
2014 done
2015 for lr in /etc/rc.d/rc2.d /etc/rc2.d /sbin/init.d/rc2.d; do
2016 if [ -d $lr ]; then
2017 lroot="`echo $lr | sed -e 's;2;%d;'`"
2018 break
2019 fi
2020 done
2021 if [ ".$sroot" = . -o ".$lroot" = . ]; then
2022 echo "ERROR: Failed to guess the location of the system init scripts!" 1>&2
2023 exit 1
2024 fi
2025 fi
2026 if [ ! -f $sroot/${name} ]; then
2027 # install transfer script
2028 ( echo "#!/bin/sh"
2029 echo "##"
2030 echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
2031 echo "##"
2032 echo ""
2033 echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
2034 echo "case \$1 in"
2035 echo " start ) exec ${prefix}/etc/rc all start ;;"
2036 echo " stop ) exec ${prefix}/etc/rc all stop ;;"
2037 echo "esac"
2038 ) >$sroot/${name}
2039 chmod 755 $sroot/${name}
2040 # create corresponding symbolic links
2041 for i in 2 3 4 5; do
2042 ln -s $sroot/${name} `echo $lroot | sed -e "s;%d;$i;"`/S99${name}
2043 done
2044 for i in 0 1 6; do
2045 ln -s $sroot/${name} `echo $lroot | sed -e "s;%d;$i;"`/K00${name}
2046 done
2047 fi
2048 fi
2049 ;;
2050 SunOS/5.* )
2051 if [ ! -f /etc/init.d/${name} ]; then
2052 # install transfer script
2053 ( echo "#!/bin/sh"
2054 echo "##"
2055 echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
2056 echo "##"
2057 echo ""
2058 echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
2059 echo "case \$1 in"
2060 echo " start ) exec ${prefix}/etc/rc all start ;;"
2061 echo " stop ) exec ${prefix}/etc/rc all stop ;;"
2062 echo "esac"
2063 ) >/etc/init.d/${name}
2064 chmod 755 /etc/init.d/${name}
2065 # create corresponding symbolic links
2066 ( cd /etc
2067 ln init.d/${name} rc3.d/S99${name}
2068 ln init.d/${name} rc0.d/K00${name}
2069 ln init.d/${name} rc1.d/K00${name}
2070 ) || exit $?
2071 fi
2072 ;;
2073 UnixWare/* )
2074 if [ ! -f /etc/init.d/${name} ]; then
2075 # install transfer script
2076 ( echo "#!/bin/sh"
2077 echo "##"
2078 echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
2079 echo "##"
2080 echo ""
2081 echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
2082 echo "case \$1 in"
2083 echo " start ) exec ${prefix}/etc/rc all start ;;"
2084 echo " stop ) exec ${prefix}/etc/rc all stop ;;"
2085 echo "esac"
2086 ) >/etc/init.d/${name}
2087 chmod 755 /etc/init.d/${name}
2088 # create corresponding symbolic links
2089 ( cd /etc
2090 ln init.d/${name} rc2.d/S99${name}
2091 ln init.d/${name} rc0.d/K00${name}
2092 ln init.d/${name} rc1.d/K00${name}
2093 ) || exit $?
2094 fi
2095 ;;
2096 AIX/* )
2097 if [ ! -f /etc/rc.d/init.d/${name} ]; then
2098 # install transfer script
2099 ( echo "#!/bin/sh"
2100 echo "##"
2101 echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
2102 echo "##"
2103 echo ""
2104 echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
2105 echo "case \$1 in"
2106 echo " start ) exec ${prefix}/etc/rc all start ;;"
2107 echo " stop ) exec ${prefix}/etc/rc all stop ;;"
2108 echo "esac"
2109 ) >/etc/rc.d/init.d/${name}
2110 chmod 755 /etc/rc.d/init.d/${name}
2111 # create corresponding symbolic links
2112 ( cd /etc/rc.d
2113 ln -s ../init.d/${name} rc2.d/S99${name}
2114 ) || exit $?
2115 fi
2116 ;;
2117 OSF1/V5.* )
2118 if [ ! -f /sbin/init.d/${name} ]; then
2119 # install transfer script
2120 ( echo "#!/bin/sh"
2121 echo "##"
2122 echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
2123 echo "##"
2124 echo ""
2125 echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
2126 echo "case \$1 in"
2127 echo " start ) exec ${prefix}/etc/rc all start ;;"
2128 echo " stop ) exec ${prefix}/etc/rc all stop ;;"
2129 echo "esac"
2130 ) >/sbin/init.d/${name}
2131 chmod 755 /sbin/init.d/${name}
2132 # create corresponding symbolic links
2133 ( cd /sbin
2134 ln -s ../init.d/${name} rc3.d/S99${name}
2135 ln -s ../init.d/${name} rc0.d/K00${name}
2136 ) || exit $?
2137 fi
2138 ;;
2139 HP-UX/* )
2140 if [ ! -f /sbin/init.d/${name} ]; then
2141 # install transfer script
2142 ( echo "#!/bin/sh"
2143 echo "##"
2144 echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
2145 echo "##"
2146 echo ""
2147 echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
2148 echo "case \$1 in"
2149 echo " start ) exec ${prefix}/etc/rc all start ;;"
2150 echo " stop ) exec ${prefix}/etc/rc all stop ;;"
2151 echo "esac"
2152 ) >/sbin/init.d/${name}
2153 chmod 755 /sbin/init.d/${name}
2154 # create corresponding symbolic links
2155 ( cd /sbin
2156 ln -s ../init.d/${name} rc2.d/S900${name}
2157 ln -s ../init.d/${name} rc1.d/K100${name}
2158 ) || exit $?
2159 fi
2160 ;;
2161 Darwin/* )
2162 darwin_rc_dir="/System/Library/StartupItems/${name}"
2163 if [ ! -d ${darwin_rc_dir} ]; then
2164 mkdir ${darwin_rc_dir}
2165 fi
2166
2167 # make sure hierarchy is activated in /etc/hostconfig
2168 # FIXME: cs: simple and bad code here without any detection of existing entries
2169 echo "OPENPKG_${name}=-YES-" >>/etc/hostconfig
2170
2171 # install transfer script
2172 if [ ! -f ${darwin_rc_dir}/${name} ]; then
2173 rm -f ${darwin_rc_dir}/${name} >/dev/null 2>&1
2174 ( echo "#!/bin/sh"
2175 echo "##"
2176 echo "## ${darwin_rc_dir}/${name}"
2177 echo "## -- startup transfer script for OpenPKG ${prefix} hierarchy"
2178 echo "##"
2179 echo ""
2180 echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
2181 echo ""
2182 echo ". /etc/rc.common"
2183 echo ""
2184 echo "if [ \"\${OPENPKG_${name}:=-NO-}\" = \"-YES-\" ]; then"
2185 echo " ConsoleMessage \"OpenPKG ${prefix} hierarchy\""
2186 echo " ${prefix}/etc/rc all start"
2187 echo "fi"
2188 ) >${darwin_rc_dir}/${name}
2189 chmod 755 ${darwin_rc_dir}/${name}
2190 fi
2191 # install startup parameter list
2192 if [ ! -f ${darwin_rc_dir}/StartupParameters.plist ]; then
2193 rm -f ${darwin_rc_dir}/StartupParameters.plist >/dev/null 2>&1
2194 ( echo "{"
2195 echo " Description = \"OpenPKG ${prefix} hierarchy\";"
2196 echo " Provides = (\"OpenPKG ${prefix}\");"
2197 echo " Requires = (\"Disks\", \"Network Configuration\", \"Resolver\");"
2198 echo " Uses = (\"Cron\");"
2199 echo " OrderPreference = \"Last\";"
2200 echo " Messages ="
2201 echo " {"
2202 echo " start = \"Starting OpenPKG ${prefix} hierarchy\";"
2203 echo " stop = \"Stopping OpenPKG ${prefix} hierarchy\";"
2204 echo " };"
2205 echo "}"
2206 ) >${darwin_rc_dir}/StartupParameters.plist
2207 chmod 644 ${darwin_rc_dir}/StartupParameters.plist
2208 fi
2209 ;;
2210 IRIX*/6.* )
2211 if [ ! -f /etc/init.d/${name} ]; then
2212 # install transfer script
2213 ( echo "#!/bin/sh"
2214 echo "##"
2215 echo "## ${name} -- startup/shutdown transfer script for OpenPKG ${prefix} hierarchy"
2216 echo "##"
2217 echo ""
2218 echo "[ ! -f ${prefix}/etc/rc ] && exit 0"
2219 echo "case \$1 in"
2220 echo " start ) exec ${prefix}/etc/rc all start ;;"
2221 echo " stop ) exec ${prefix}/etc/rc all stop ;;"
2222 echo "esac"
2223 ) >/etc/init.d/${name}
2224 chmod 755 /etc/init.d/${name}
2225 # create corresponding links
2226 ( cd /etc
2227 ln -f init.d/${name} rc2.d/S99${name}
2228 ln -f init.d/${name} rc0.d/K00${name}
2229 ) || exit $?
2230 fi
2231 ;;
2232 esac
2233 fi
2234
2235 # create the cron transfer entries
2236 if [ ".$cusr" != ".root" ]; then
2237 echo "openpkg:WARNING: skipping creation of system cron hooks" 1>&2
2238 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
2239 else
2240 case "$plid" in
2241 FreeBSD/* | Linux/* | Darwin/* )
2242 if [ -f /etc/slackware-version ]; then
2243 exists=`crontab -l | grep "$prefix/etc/rc"`
2244 if [ ".$exists" = . ]; then
2245 EDITOR=/tmp/vipw.$$
2246 VISUAL="$EDITOR"
2247 export EDITOR
2248 export VISUAL
2249 ( echo "#!/bin/sh"
2250 echo "( echo \"# <OpenPKG prefix=$prefix pkg=openpkg>\""
2251 echo " echo \"# chronological tasks of ${prefix} OpenPKG hierarchy\""
2252 echo " echo \"0 0 1 * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all monthly\""
2253 echo " echo \"0 0 * * 0 [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all weekly\""
2254 echo " echo \"0 0 * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all daily\""
2255 echo " echo \"0 * * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all hourly\""
2256 echo " echo \"0,15,30,45 * * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all quarterly\""
2257 echo " echo \"# </OpenPKG>\""
2258 echo ") >>\$1"
2259 ) >$EDITOR
2260 chmod a+x $EDITOR
2261 ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
2262 rm -f $EDITOR
2263 fi
2264 else
2265 exists=`grep "$prefix/etc/rc" /etc/crontab`
2266 if [ ".$exists" = . ]; then
2267 ( echo "# <OpenPKG prefix=$prefix pkg=openpkg>"
2268 echo "# chronological tasks of ${prefix} OpenPKG hierarchy"
2269 echo "0 0 1 * * root [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all monthly"
2270 echo "0 0 * * 0 root [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all weekly"
2271 echo "0 0 * * * root [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all daily"
2272 echo "0 * * * * root [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all hourly"
2273 echo "*/15 * * * * root [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all quarterly"
2274 echo "# </OpenPKG>"
2275 ) >>/etc/crontab
2276 fi
2277 fi
2278 ;;
2279 SunOS/5.* | OSF1/V5.* | NetBSD/* | HP-UX/* | UnixWare/* | AIX/* )
2280 exists=`crontab -l | grep "$prefix/etc/rc"`
2281 if [ ".$exists" = . ]; then
2282 EDITOR=/tmp/vipw.$$
2283 VISUAL="$EDITOR"
2284 export EDITOR
2285 export VISUAL
2286 ( echo "#!/bin/sh"
2287 echo "( echo \"# <OpenPKG prefix=$prefix pkg=openpkg>\""
2288 echo " echo \"# chronological tasks of ${prefix} OpenPKG hierarchy\""
2289 echo " echo \"0 0 1 * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all monthly\""
2290 echo " echo \"0 0 * * 0 [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all weekly\""
2291 echo " echo \"0 0 * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all daily\""
2292 echo " echo \"0 * * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all hourly\""
2293 echo " echo \"0,15,30,45 * * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all quarterly\""
2294 echo " echo \"# </OpenPKG>\""
2295 echo ") >>\$1"
2296 ) >$EDITOR
2297 chmod a+x $EDITOR
2298 ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
2299 rm -f $EDITOR
2300 fi
2301 ;;
2302 IRIX*/6.* )
2303 exists=`crontab -l | grep "$prefix/etc/rc"`
2304 if [ ".$exists" = . ]; then
2305 ( crontab -l
2306 echo "# <OpenPKG prefix=$prefix pkg=openpkg>"
2307 echo "# chronological tasks of ${prefix} OpenPKG hierarchy"
2308 echo "0 0 1 * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all monthly"
2309 echo "0 0 * * 0 [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all weekly"
2310 echo "0 0 * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all daily"
2311 echo "0 * * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all hourly"
2312 echo "0,15,30,45 * * * * [ -f ${prefix}/etc/rc ] && ${prefix}/etc/rc all quarterly"
2313 echo "# </OpenPKG>"
2314 ) | /usr/bin/crontab || exit $?
2315 fi
2316 ;;
2317 esac
2318 fi
2319
2320 # remember what OpenPKG RPM version was installed, so we can
2321 # correctly upgrade the RPM database in the %post section (see below).
2322 if [ -d ${prefix}/RPM/DB ]; then
2323 if [ -x "${prefix}/bin/openpkg" -a -x "${prefix}/libexec/openpkg/rpm" ]; then
2324 # OpenPKG 2.0
2325 rpm="${prefix}/bin/openpkg rpm"
2326 else
2327 # OpenPKG 1.x
2328 rpm="${prefix}/bin/rpm"
2329 fi
2330 rm -f ${prefix}/RPM/DB/.version >/dev/null 2>&1 || true
2331 $rpm --version |\
2332 sed -e 's;^;X;' \
2333 -e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*$;\1;' \
2334 -e 's;^X[^0-9]*\([0-9][0-9]*\.[0-9][0-9]*\).*$;\1;' \
2335 -e 's;^X.*$;4.0;' \
2336 >${prefix}/RPM/DB/.version
2337 fi
2338
2339 %post
2340 # optional post-processing from "pre" section
2341 if [ -f %{l_prefix}.pre-post-process.sh ]; then
2342 sh %{l_prefix}.pre-post-process.sh
2343 rm -f %{l_prefix}.pre-post-process.sh
2344 fi
2345
2346 # update or initially create OpenPKG UUID configuration
2347 %{l_prefix}/bin/openpkg uuid update >/dev/null 2>&1 || true
2348
2349 # determine new and old OpenPKG RPM version
2350 V_rpm_new="%{V_rpm}"
2351 if [ -f %{l_prefix}/RPM/DB/.version ]; then
2352 V_rpm_old="`cat %{l_prefix}/RPM/DB/.version`"
2353 rm -f %{l_prefix}/RPM/DB/.version >/dev/null 2>&1 || true
2354 else
2355 V_rpm_old="4.0"
2356 fi
2357
2358 # make sure all RPM database files are present and that their
2359 # attributes are correct, etc. This is not a database rebuild
2360 # operation, so this is fully harmless and can be done always.
2361 %{l_prefix}/lib/openpkg/rpmdb --quiet --fixate
2362
2363 # check RPM database for upgrade requirements
2364 if [ ".$1" = .2 -a ".$V_rpm_old" != ".$V_rpm_new" ]; then
2365 # RPM 4.0/4.1 does not allow concurrent database access, so we
2366 # cannot upgrade the database immediately from here (because
2367 # we are still running within the execution context of the
2368 # old RPM which in turn has the database locked) and instead
2369 # have to just drop a note to the administrator about database
2370 # upgrading. RPM 4.2 in general allows concurrent database
2371 # access, but the whole stuff is too risky here, too.
2372 ( echo "You are upgrading the OpenPKG bootstrap from a previous"
2373 echo "RPM $V_rpm_old based version to this RPM $V_rpm_new based"
2374 echo "version. The RPM database in %{l_prefix}/RPM/DB/ can still"
2375 echo "be used, but it is strongly recommended to upgrade it as"
2376 echo "soon as possible to the latest Berkeley-DB format files by"
2377 echo "executing the command:"
2378 echo " \$ %{l_prefix}/bin/openpkg rpm --db-rebuild"
2379 echo "In case of problems with the RPM database you can always"
2380 echo "execute the command:"
2381 echo " \$ %{l_prefix}/bin/openpkg rpm --db-cleanup"
2382 ) | %{l_prefix}/lib/openpkg/rpmtool msg -b -t warn
2383 fi
2384
2385 # system command overriding support
2386 # ATTENTION: THIS BETTER SHOULD BE REPLACED WITH A MORE GENERIC
2387 # BUILD COMMAND OVERRIDE SOLUTION!
2388 if [ ! -d %{l_prefix}/lib/openpkg/override ]; then
2389 mkdir %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
2390 fi
2391 chown %{l_musr}:%{l_mgrp} %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
2392 case "`cat %{l_prefix}/etc/openpkg/platform`" in
2393 *-*-debian* | *-*-ubuntu* )
2394 # FIXME: Evil hack to workaround build problems under Debian
2395 # (at least 3.1) (and similar platforms) where a Debian
2396 # install-info(8) exists which is both API and functionally
2397 # incompatible to the de-facto standardized install-info(8)
2398 # command from GNU Texinfo.
2399 if [ ! -f %{l_prefix}/lib/openpkg/override/install-info ]; then
2400 ( echo "#!/bin/sh"
2401 echo "echo 'OpenPKG: NOTICE: install-info(8) command execution overridden'"
2402 echo "exit 0"
2403 ) >%{l_prefix}/lib/openpkg/override/install-info
2404 chmod 775 %{l_prefix}/lib/openpkg/override/install-info
2405 fi
2406 ;;
2407 *-*-macosx* | *-*-darwin* )
2408 # FIXME: Evil hack to workaround the fact that Mac OS X'
2409 # linker by default prefers the /usr/lib libraries and does
2410 # not honor the -L options the way one would expect it.
2411 gcc="`%{l_prefix}/lib/openpkg/shtool path gcc`"
2412 cc="`%{l_prefix}/lib/openpkg/shtool path cc`"
2413 ld="`%{l_prefix}/lib/openpkg/shtool path ld`"
2414 if [ ".$gcc" != . -a ! -f %{l_prefix}/lib/openpkg/override/gcc ]; then
2415 ( echo "#!/bin/sh"
2416 echo "case \" \$* \" in"
2417 echo " *\" -c \"* | *\" -E \"* ) exec $gcc \"\$@\" ;;"
2418 echo " * ) exec $gcc -Wl,-search_paths_first \"\$@\" ;;"
2419 echo "esac"
2420 ) >%{l_prefix}/lib/openpkg/override/gcc
2421 chmod 775 %{l_prefix}/lib/openpkg/override/gcc
2422 fi
2423 if [ ".$cc" != . -a ! -f %{l_prefix}/lib/openpkg/override/cc ]; then
2424 ( echo "#!/bin/sh"
2425 echo "case \" \$* \" in"
2426 echo " *\" -c \"* | *\" -E \"* ) exec $gcc \"\$@\" ;;"
2427 echo " * ) exec $cc -Wl,-search_paths_first \"\$@\" ;;"
2428 echo "esac"
2429 ) >%{l_prefix}/lib/openpkg/override/cc
2430 chmod 775 %{l_prefix}/lib/openpkg/override/cc
2431 fi
2432 if [ ".$ld" != . -a ! -f %{l_prefix}/lib/openpkg/override/ld ]; then
2433 ( echo "#!/bin/sh"
2434 echo "exec $ld -search_paths_first \"\$@\""
2435 ) >%{l_prefix}/lib/openpkg/override/ld
2436 chmod 775 %{l_prefix}/lib/openpkg/override/ld
2437 fi
2438 ;;
2439 esac
2440
2441 # FIXME: hack to workaround problems in environments with too few
2442 # development tools. ATTENTION: see one paragraph above.
2443 if [ ! -d %{l_prefix}/lib/openpkg/fallback ]; then
2444 mkdir %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
2445 fi
2446 chown %{l_musr}:%{l_mgrp} %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
2447
2448 # check for "openpkg" executable from the OpenPKG Community series
2449 # print license if not OSS, otherwise register with openpkg.org
2450 community_version=`%{l_prefix}/bin/openpkg --license 2>/dev/null | \
2451 sed -e 'q' | egrep '[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*-C'`
2452 if [ ".$community_version" = . ]; then
2453 ( echo ""
2454 echo "NOTICE: This OpenPKG bootstrap package is based on an \"openpkg\""
2455 echo "executable which is covered by the following terms of use:"
2456 echo "______________________________________________________________________________"
2457 echo ""
2458 %{l_prefix}/bin/openpkg --license | sed -e '1d'
2459 ) | %{l_prefix}/lib/openpkg/rpmtool msg -b -t notice
2460 else
2461 %{l_prefix}/bin/openpkg register </dev/null >/dev/null 2>&1 || true
2462 fi
2463
2464 %preun
2465 [ ".$1" != .0 ] && exit 0
2466
2467 # remove override files
2468 if [ -d %{l_prefix}/lib/openpkg/override ]; then
2469 rm -rf %{l_prefix}/lib/openpkg/override >/dev/null 2>&1 || true
2470 fi
2471
2472 # remove fallback files
2473 if [ -d %{l_prefix}/lib/openpkg/fallback ]; then
2474 rm -rf %{l_prefix}/lib/openpkg/fallback >/dev/null 2>&1 || true
2475 fi
2476
2477 # remove files which are not RPM controlled
2478 rm -rf %{l_prefix}/RPM/TMP/* %{l_prefix}/RPM/TMP/.[a-z]* >/dev/null 2>&1 || true
2479 rm -rf %{l_prefix}/RPM/SRC/* %{l_prefix}/RPM/SRC/.[a-z]* >/dev/null 2>&1 || true
2480 rm -rf %{l_prefix}/RPM/PKG/* %{l_prefix}/RPM/PKG/.[a-z]* >/dev/null 2>&1 || true
2481 rm -rf %{l_prefix}/RPM/DB/* %{l_prefix}/RPM/DB/.[a-z]* >/dev/null 2>&1 || true
2482
2483 # The following code usually would be done in a %postun section.
2484 # But because we already had to remove the database in this %preun
2485 # section (see the 'rm' commands above) in order to make RPM happy
2486 # inside its own removal procedure, RPM would no longer find the
2487 # %postun script (because it's recorded in the database files). So
2488 # we have to perform the procedure already in this %preun script.
2489 # except for the removal of the top-level directory it does not
2490 # matter. But the top-level directory can only be removed after
2491 # the RPM removal procedure took place, so we play a little delay
2492 # trick below.
2493
2494 # determine current user
2495 cusr=`(id -un) 2>/dev/null ||\
2496 (id | sed -e 's;^[^(]*(\([^)]*\)).*;\1;') 2>/dev/null ||\
2497 (whoami) 2>/dev/null ||\
2498 (who am i | cut "-d " -f1) 2>/dev/null ||\
2499 echo $LOGNAME`
2500
2501 # determine runtime details (for both inside and outside RPM!!)
2502 user="%{l_musr}"
2503 group="%{l_mgrp}"
2504 prefix="%{l_prefix}"
2505 prefix=`echo "$prefix" | sed -e 's;//*;/;g' -e 's;/$;;'`
2506
2507 # determine platform id
2508 s=`(uname -s) 2>/dev/null` || s='Unknown'
2509 r=`(uname -r) 2>/dev/null` || r='0.0'
2510 plid="${s}/${r}"
2511
2512 # unregister instance in presence file
2513 presence="/etc/openpkg"
2514 exists=`cat $presence 2>/dev/null | egrep "^ *${prefix} *\$"`
2515 if [ ".$exists" != . ]; then
2516 if [ ".$cusr" != ".root" ]; then
2517 echo "openpkg:WARNING: skipping unregistering of $prefix in $presence" 1>&2
2518 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
2519 else
2520 cp $presence $presence.bak && \
2521 egrep -v "^ *${prefix} *\$" $presence.bak >$presence
2522 rm -f $presence.bak >/dev/null 2>&1
2523 if [ ".`cat $presence`" = . ]; then
2524 rm -f $presence >/dev/null 2>&1
2525 fi
2526 fi
2527 fi
2528
2529 # remove entry in /etc/shells
2530 shell="${prefix}/lib/openpkg/bash"
2531 exists=`cat /etc/shells 2>/dev/null | grep "^$shell"`
2532 if [ ".$exists" != . ]; then
2533 if [ ".$cusr" != ".root" ]; then
2534 echo "openpkg:WARNING: skipping deletion of $shell from /etc/shells" 1>&2
2535 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
2536 else
2537 cp /etc/shells /etc/shells.bak && \
2538 grep -v "^${shell}" /etc/shells.bak >/etc/shells
2539 rm -f /etc/shells.bak >/dev/null 2>&1
2540 fi
2541 fi
2542
2543 # remove the hierarchy user/group
2544 for req in "super-user:%{l_susr}:%{l_suid}:%{l_sgrp}:%{l_sgid}" \
2545 "management:%{l_musr}:%{l_muid}:%{l_mgrp}:%{l_mgid}" \
2546 "restricted:%{l_rusr}:%{l_ruid}:%{l_rgrp}:%{l_rgid}" \
2547 "non-privileged:%{l_nusr}:%{l_nuid}:%{l_ngrp}:%{l_ngid}"; do
2548 # split request into class/usr/uid/grp/gid
2549 OIFS="$IFS"; IFS=":"; set -- $req; IFS="$OIFS"
2550 class="$1"; usr="$2"; uid="$3"; grp="$4"; gid="$5"
2551
2552 # check whether user already exists
2553 exists=`(getent passwd "$usr"; \
2554 grep "^$usr:" /etc/passwd; \
2555 ypmatch "$usr" passwd; \
2556 nismatch "$usr" passwd; \
2557 nidump passwd . | grep "^$usr:") 2>/dev/null | \
2558 sed -e 'q'`
2559 if [ ".$exists" != . ]; then
2560 if [ ".$cusr" != ".root" ]; then
2561 echo "openpkg:WARNING: skipping deletion of OpenPKG $class user $usr" 1>&2
2562 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
2563 elif [ ".$usr" = ".root" ]; then
2564 echo "openpkg:WARNING: skipping deletion of OpenPKG $class user $usr" 1>&2
2565 echo "openpkg:WARNING: (would remove system standard user)" 1>&2
2566 else
2567 case "$plid" in
2568 FreeBSD/* | NetBSD/* )
2569 cp /etc/master.passwd /etc/master.passwd.bak && \
2570 grep -v "^${usr}:" /etc/master.passwd.bak >/etc/master.passwd
2571 ( PATH="$PATH:/usr/sbin"; pwd_mkdb -p /etc/master.passwd ) || exit $?
2572 rm -f /etc/master.passwd.bak >/dev/null 2>&1
2573 ;;
2574 Linux/* | SunOS/5.* | UnixWare/* )
2575 cp /etc/passwd /etc/passwd.bak && \
2576 grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
2577 ( PATH="$PATH:/usr/sbin"; pwconv ) || exit $?
2578 rm -f /etc/passwd.bak >/dev/null 2>&1
2579 ;;
2580 AIX/* )
2581 rmuser -p "${usr}"
2582 cp /etc/security/login.cfg /etc/security/login.cfg.bak && \
2583 sed -e "/^usw:/,/^[^ ]/s;\\( *shells =.*\\),$shell\\(.*\\)\$;\\1\\2;" \
2584 </etc/security/login.cfg.bak >/etc/security/login.cfg && \
2585 rm -f /etc/security/login.cfg.bak >/dev/null 2>&1
2586 ;;
2587 OSF1/V5.* )
2588 cp /etc/passwd /etc/passwd.bak && \
2589 grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
2590 ( PATH="$PATH:/usr/sbin"; mkpasswd /etc/passwd ) || exit $?
2591 rm -f /etc/passwd.bak >/dev/null 2>&1
2592 ;;
2593 HP-UX/* )
2594 cp /etc/passwd /etc/passwd.bak && \
2595 grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
2596 rm -f /etc/passwd.bak >/dev/null 2>&1
2597 ;;
2598 Darwin/* )
2599 niutil -destroy . "/users/${usr}"
2600 ;;
2601 IRIX*/6.* )
2602 cp /etc/passwd /etc/passwd.bak && \
2603 grep -v "^${usr}:" /etc/passwd.bak >/etc/passwd
2604 if [ -f /etc/shadow ]
2605 then ( PATH="$PATH:/usr/sbin"; pwconv ) || exit $?
2606 fi
2607 rm -f /etc/passwd.bak >/dev/null 2>&1
2608 ;;
2609 esac
2610 fi
2611 fi
2612
2613 # check whether group already exists
2614 exists=`(getent group "$grp"; \
2615 grep "^$grp:" /etc/group; \
2616 ypmatch "$grp" group; \
2617 nismatch "$grp" group; \
2618 nidump group . | grep "^$grp:") 2>/dev/null | \
2619 sed -e 'q'`
2620 if [ ".$exists" != . ]; then
2621 if [ ".$cusr" != ".root" ]; then
2622 echo "openpkg:WARNING: skipping deletion of OpenPKG $class group $grp" 1>&2
2623 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
2624 elif [ ".$usr" = ".root" ] || [ ".$grp" = ".root" ] || [ ".$grp" = ".wheel" ]; then
2625 echo "openpkg:WARNING: skipping deletion of OpenPKG $class group $grp" 1>&2
2626 echo "openpkg:WARNING: (would remove system standard group)" 1>&2
2627 else
2628 case "$plid" in
2629 Darwin/* )
2630 niutil -destroy . "/groups/${grp}"
2631 ;;
2632 AIX/* )
2633 rmgroup "${grp}"
2634 ;;
2635 * )
2636 cp /etc/group /etc/group.bak && \
2637 grep -v "^${grp}:" /etc/group.bak >/etc/group
2638 rm -f /etc/group.bak >/dev/null 2>&1
2639 ;;
2640 esac
2641 fi
2642 fi
2643 done
2644
2645 # invalidate passwd and group tables from Name Service Cache Daemon to
2646 # ensure chown/chgrp works immediately after pwconv on Linux and Solaris
2647 if [ -x /usr/sbin/nscd ]; then
2648 /usr/sbin/nscd -i passwd >/dev/null 2>&1 || true
2649 /usr/sbin/nscd -i group >/dev/null 2>&1 || true
2650 fi
2651
2652 # remove the startup/shutdown transfer scripts
2653 name=`echo "$prefix" | sed -e 's;/;;g'`
2654 if [ ".$cusr" != ".root" ]; then
2655 echo "openpkg:WARNING: skipping deletion of system run-command hooks" 1>&2
2656 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
2657 else
2658 case "$plid" in
2659 FreeBSD/* )
2660 rm -f /etc/rc.d/openpkg-${name} >/dev/null 2>&1
2661 ;;
2662 NetBSD/* )
2663 rm -f /etc/rc.d/${name} >/dev/null 2>&1
2664 ;;
2665 Linux/* )
2666 if [ -f /etc/gentoo-release ]; then
2667 /sbin/rc-update del openpkg-${name} >/dev/null 2>&1
2668 rm -f /etc/init.d/openpkg-${name} >/dev/null 2>&1
2669 else
2670 # sroot: script root directory
2671 # lroot: link root directory
2672 if [ -f /etc/debian_version ]; then
2673 sroot=/etc/init.d
2674 lroot=/etc/rc%d.d
2675 elif [ -f /etc/redhat-release -o -f /etc/mandrake-release ]; then
2676 sroot=/etc/rc.d/init.d
2677 lroot=/etc/rc.d/rc%d.d
2678 elif [ -f /etc/SuSE-release ]; then
2679 sroot=/etc/init.d
2680 lroot=/etc/init.d/rc%d.d
2681 elif [ -f /etc/slackware-version ]; then
2682 sroot=/etc/rc.d
2683 lroot=/etc/rc.d/rc%d.d
2684 name="rc.${name}"
2685 else
2686 echo "WARNING: you are not running one of the supported standard" 1>&2
2687 echo "WARNING: Linux platforms (Debian, RedHat, Mandrake, SuSE, Gentoo)." 1>&2
2688 echo "WARNING: Guessing the location of the system init scripts!" 1>&2
2689 sroot=""
2690 lroot=""
2691 for sr in /etc/rc.d/init.d /etc/init.d /sbin/init.d; do
2692 if [ -d $sr ]; then
2693 sroot="$sr"
2694 break
2695 fi
2696 done
2697 for lr in /etc/rc.d/rc2.d /etc/rc2.d /sbin/init.d/rc2.d; do
2698 if [ -d $lr ]; then
2699 lroot="`echo $lr | sed -e 's;2;%d;'`"
2700 break
2701 fi
2702 done
2703 if [ ".$sroot" = . -o ".$lroot" = . ]; then
2704 echo "ERROR: Failed to guess the location of the system init scripts!" 1>&2
2705 exit 1
2706 fi
2707 fi
2708 rm -f ${sroot}/${name} >/dev/null 2>&1
2709 for i in 2 3 4 5; do
2710 rm -f `echo $lroot | sed -e "s;%d;$i;"`/S99${name} >/dev/null 2>&1
2711 done
2712 for i in 0 1 6; do
2713 rm -f `echo $lroot | sed -e "s;%d;$i;"`/K00${name} >/dev/null 2>&1
2714 done
2715 if [ -f /etc/slackware-version ]; then
2716 for i in 0 1 2 3 4 5 6; do
2717 l=`echo $lroot | sed -e "s;%d;$i;"`
2718 if [ -d $l ]; then
2719 rmdir $l >/dev/null 2>&1 || true
2720 fi
2721 done
2722 fi
2723 fi
2724 ;;
2725 SunOS/5.* )
2726 rm -f /etc/init.d/${name} >/dev/null 2>&1
2727 rm -f /etc/rc3.d/S99${name} >/dev/null 2>&1
2728 rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
2729 rm -f /etc/rc1.d/K00${name} >/dev/null 2>&1
2730 ;;
2731 UnixWare/* )
2732 rm -f /etc/init.d/${name} >/dev/null 2>&1
2733 rm -f /etc/rc2.d/S99${name} >/dev/null 2>&1
2734 rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
2735 rm -f /etc/rc1.d/K00${name} >/dev/null 2>&1
2736 ;;
2737 AIX/* )
2738 rm -f /etc/rc.d/init.d/${name} >/dev/null 2>&1
2739 rm -f /etc/rc.d/rc2.d/S99${name} >/dev/null 2>&1
2740 ;;
2741 OSF1/V5.* )
2742 rm -f /sbin/init.d/${name} >/dev/null 2>&1
2743 rm -f /sbin/rc3.d/S99${name} >/dev/null 2>&1
2744 rm -f /sbin/rc0.d/K00${name} >/dev/null 2>&1
2745 ;;
2746 HP-UX/* )
2747 rm -f /sbin/init.d/${name} >/dev/null 2>&1
2748 rm -f /etc/rc2.d/S900${name} >/dev/null 2>&1
2749 rm -f /etc/rc1.d/K100${name} >/dev/null 2>&1
2750 ;;
2751 Darwin/* )
2752 cp /etc/hostconfig /etc/hostconfig.bak && \
2753 grep -v "^OPENPKG_${name}=" /etc/hostconfig.bak >/etc/hostconfig
2754 rm -f /etc/hostconfig.bak >/dev/null 2>&1
2755 rm -rf /System/Library/StartupItems/${name} >/dev/null 2>&1
2756 ;;
2757 IRIX*/6.* )
2758 rm -f /etc/init.d/${name} >/dev/null 2>&1
2759 rm -f /etc/rc2.d/S99${name} >/dev/null 2>&1
2760 rm -f /etc/rc0.d/K00${name} >/dev/null 2>&1
2761 ;;
2762 esac
2763 fi
2764
2765 # remove the cron transfer entries
2766 if [ ".$cusr" != ".root" ]; then
2767 echo "openpkg:WARNING: skipping deletion of system cron hooks" 1>&2
2768 echo "openpkg:WARNING: (would require root-privileges)" 1>&2
2769 else
2770 case "$plid" in
2771 FreeBSD/* | Linux/* | Darwin/* )
2772 if [ -f /etc/slackware-version ]; then
2773 EDITOR=/tmp/vipw.$$
2774 VISUAL="$EDITOR"
2775 export EDITOR
2776 export VISUAL
2777 p=`echo $prefix | sed -e 's;/;\\\\\\\\/;g'`
2778 ( echo "cp \$1 \$1.bak"
2779 echo "cat \$1.bak | sed -e \"/<OpenPKG prefix=$p pkg=openpkg>/,/<\\\\/OpenPKG>/d\" >\$1"
2780 echo "rm -f \$1.bak"
2781 ) >$EDITOR
2782 chmod a+x $EDITOR
2783 ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
2784 rm -f $EDITOR
2785 else
2786 exists=`grep "<OpenPKG prefix=$prefix pkg=openpkg>" /etc/crontab`
2787 if [ ".$exists" != . ]; then
2788 p=`echo $prefix | sed -e 's;/;\\\\/;g'`
2789 cp /etc/crontab /etc/crontab.bak
2790 cat /etc/crontab.bak |\
2791 sed -e "/<OpenPKG prefix=$p pkg=openpkg>/,/<\\/OpenPKG>/d" \
2792 >/etc/crontab
2793 rm -f /etc/crontab.bak >/dev/null 2>&1
2794 fi
2795 fi
2796 ;;
2797 SunOS/5.* | OSF1/V5.* | NetBSD/* | HP-UX/* | UnixWare/* | AIX/* )
2798 EDITOR=/tmp/vipw.$$
2799 VISUAL="$EDITOR"
2800 export EDITOR
2801 export VISUAL
2802 p=`echo $prefix | sed -e 's;/;\\\\\\\\/;g'`
2803 ( echo "cp \$1 \$1.bak"
2804 echo "cat \$1.bak | sed -e \"/<OpenPKG prefix=$p pkg=openpkg>/,/<\\\\/OpenPKG>/d\" >\$1"
2805 echo "rm -f \$1.bak"
2806 ) >$EDITOR
2807 chmod a+x $EDITOR
2808 ( PATH="$PATH:/usr/bin"; crontab -e ) || exit $?
2809 rm -f $EDITOR
2810 ;;
2811 IRIX*/6.* )
2812 p=`echo $prefix | sed -e 's;/;\\\\\\/;g'`
2813 ( crontab -l |
2814 sed -e "/<OpenPKG prefix=$p pkg=openpkg>/,/<\/OpenPKG>/d"
2815 ) | /usr/bin/crontab || exit $?
2816 ;;
2817 esac
2818 fi
2819
2820 # delayed removal of top-level directory.
2821 ( sleep 2
2822 rm -rf %{l_prefix}/RPM/DB/* %{l_prefix}/RPM/DB/.[a-z]* >/dev/null 2>&1 || true
2823 rmdir %{l_prefix}/RPM/DB >/dev/null 2>&1 || true
2824 rmdir %{l_prefix}/RPM >/dev/null 2>&1 || true
2825 rmdir %{l_prefix} >/dev/null 2>&1 || true
2826 ) </dev/null >/dev/null 2>/dev/null &
2827

Mercurial Repository: OpenPKG Specs

Europalab SCM Repository Server

mercurial