clamav/rc.clamav@c10fb90893b9
clamav/rc.clamav
Thu, 04 Oct 2012 20:30:05 +0200
- author
- Michael Schloh von Bennewitz <michael@schloh.com>
- date
- Thu, 04 Oct 2012 20:30:05 +0200
- changeset 715
- c10fb90893b9
- parent 233
- f5f6e93f3dc6
- permissions
- -rw-r--r--
Correct out of date build configuration, porting to Solaris 11 network
link infrastructure and new libpcap logic. This additionally allows for
device drivers in subdirectories of /dev. Correct packaged nmap
personalities and signatures to work out of the box. Finally, hack
arpd logic to properly close sockets and quit on TERM by repeating
signaling in the run command script. Sadly, all this fails to correct
the run time behaviour of honeyd which fails to bind to the IP layer.
1 #!@l_prefix@/bin/openpkg rc
2 ##
3 ## rc.clamav -- Run-Commands
4 ##
6 %config
7 clamav_enable="$openpkg_rc_def"
8 clamav_daemons="clamd clamav-milter"
9 clamav_clamd_flags=""
10 clamav_clamav_milter_flags=""
11 clamav_update="daily"
12 clamav_log_prolog="true"
13 clamav_log_epilog="true"
14 clamav_log_numfiles="10"
15 clamav_log_minsize="1M"
16 clamav_log_complevel="9"
18 %common
19 clamav_cfgfile="@l_prefix@/etc/clamav/clamd.conf"
20 clamav_milter_cfgfile="@l_prefix@/etc/clamav/clamav-milter.conf"
21 clamav_pidfile_clamd="@l_prefix@/var/clamav/clamd.pid"
22 clamav_pidfile_clamav_milter="@l_prefix@/var/clamav/clamav-milter.pid"
23 clamav_signal () {
24 [ -f $clamav_pidfile_clamd ] \
25 && kill -$1 `cat $clamav_pidfile_clamd`
26 local rc_clamav_clamd=$?
27 [ -f $clamav_pidfile_clamav_milter ] \
28 && kill -$1 `cat $clamav_pidfile_clamav_milter`
29 local rc_clamav_clamav_milter=$?
30 [ $rc_clamav_clamd -eq 0 \
31 -o $rc_clamav_clamav_milter -eq 0 ]
32 }
34 %status -u @l_rusr@ -o
35 clamav_usable="unknown"
36 clamav_active="no"
37 rcService clamav enable yes && \
38 clamav_signal 0 && clamav_active="yes"
39 echo "clamav_enable=\"$clamav_enable\""
40 echo "clamav_usable=\"$clamav_usable\""
41 echo "clamav_active=\"$clamav_active\""
43 %start -u @l_rusr@
44 rcService clamav enable yes || exit 0
45 rcService clamav active yes && exit 0
46 for daemon in $clamav_daemons; do
47 if [ ".$daemon" = ".clamd" ]; then
48 @l_prefix@/sbin/clamd \
49 --config-file=$clamav_cfgfile \
50 $clamav_clamd_flags
51 elif [ ".$daemon" = ".clamav-milter" -a -x @l_prefix@/sbin/clamav-milter ]; then
52 ( umask 002
53 @l_prefix@/sbin/clamav-milter \
54 --config-file=$clamav_milter_cfgfile \
55 $clamav_clamav_milter_flags
56 ) || exit $?
57 fi
58 done
60 %stop -u @l_rusr@
61 rcService clamav enable yes || exit 0
62 rcService clamav active no && exit 0
63 clamav_signal TERM
64 rm -f $clamav_pidfile_clamd 2>/dev/null || true
65 rm -f $clamav_pidfile_clamav_milter 2>/dev/null || true
67 %restart -u @l_rusr@
68 rcService clamav enable yes || exit 0
69 rcService clamav active no && exit 0
70 rc clamav stop
71 sleep 2
72 rc clamav start
74 %quarterly -u @l_rusr@
75 rcService clamav enable yes || exit 0
76 if [ ".$clamav_update" = .quarterly ]; then
77 @l_prefix@/bin/freshclam
78 if [ $? -ge 10 ]; then exit $?; fi
79 fi
81 %hourly -u @l_rusr@
82 rcService clamav enable yes || exit 0
83 if [ ".$clamav_update" = .hourly ]; then
84 @l_prefix@/bin/freshclam
85 if [ $? -ge 10 ]; then exit $?; fi
86 fi
88 %daily -u @l_rusr@
89 rcService clamav enable yes || exit 0
90 if [ ".$clamav_update" = .daily ]; then
91 @l_prefix@/bin/freshclam
92 if [ $? -ge 10 ]; then exit $?; fi
93 fi
94 logfiles=""
95 for daemon in freshclam $clamav_daemons; do
96 logfiles="$logfiles @l_prefix@/var/clamav/$daemon.log"
97 done
98 shtool rotate -f \
99 -n $clamav_log_numfiles -s $clamav_log_minsize -d \
100 -z $clamav_log_complevel -o @l_rusr@ -g @l_rgrp@ -m 644 \
101 -P "$clamav_log_prolog" \
102 -E "$clamav_log_epilog; rc clamav restart" \
103 $logfiles
105 %weekly -u @l_rusr@
106 rcService clamav enable yes || exit 0
107 if [ ".$clamav_update" = .weekly ]; then
108 @l_prefix@/bin/freshclam
109 if [ $? -ge 10 ]; then exit $?; fi
110 fi
