dhcpd/dhcpd.conf@c10fb90893b9
dhcpd/dhcpd.conf
Thu, 04 Oct 2012 20:30:05 +0200
- author
- Michael Schloh von Bennewitz <michael@schloh.com>
- date
- Thu, 04 Oct 2012 20:30:05 +0200
- changeset 715
- c10fb90893b9
- permissions
- -rw-r--r--
Correct out of date build configuration, porting to Solaris 11 network
link infrastructure and new libpcap logic. This additionally allows for
device drivers in subdirectories of /dev. Correct packaged nmap
personalities and signatures to work out of the box. Finally, hack
arpd logic to properly close sockets and quit on TERM by repeating
signaling in the run command script. Sadly, all this fails to correct
the run time behaviour of honeyd which fails to bind to the IP layer.
1 ##
2 ## dhcpd.conf -- ISC DHCP Daemon Configuration
3 ##
5 # Options applicable to all subnets
6 option domain-name "example.com";
7 authoritative;
8 default-lease-time 600;
9 max-lease-time 7200;
10 ddns-update-style none;
11 use-host-decl-names on;
13 # Define some non-standard options
14 option freebsd-swappath code 128 = text;
15 option freebsd-rootopts code 130 = text;
16 option freebsd-swapopts code 131 = text;
18 # Test drive using loopback
19 subnet 127.0.0.0 netmask 255.0.0.0 {
20 }
22 # Define a particular sample subnet
23 subnet 192.168.1.0 netmask 255.255.255.0 {
25 # Options applicable to this particular subnet
26 option broadcast-address 192.168.1.255;
27 option subnet-mask 255.255.255.0;
28 option routers 192.168.1.1;
29 option domain-name-servers 192.168.1.2;
31 # Dynamic DNS (DDNS) Updating
32 ddns-updates off;
33 ddns-domainname "example.com";
34 ddns-rev-domainname "in-addr.arpa";
36 # Pool of known clients (i.e. MAC known but IP not specified)
37 pool {
38 range 192.168.1.100 192.168.1.149;
39 min-lease-time 600; # 10min
40 default-lease-time 43200; # 12hour
41 max-lease-time 86400; # 24hour
42 deny unknown clients;
43 }
45 # Pool of unknown clients (i.e. MAC not known)
46 pool {
47 range 192.168.1.150 192.168.1.199;
48 min-lease-time 300; # 5min
49 default-lease-time 3600; # 1hour
50 max-lease-time 10800; # 3hour
51 allow unknown clients;
52 }
53 }
55 # The list of clients we explicitly configure
56 group {
57 # Just assign a fixed IP address for machine "quux1"
58 host quux1 {
59 hardware ethernet 01:02:03:00:00:01;
60 fixed-address 192.168.1.3;
61 }
63 # Provide full boot information for a FreeBSD diskless client "quux2":
64 # On the server, create a 32MB swapfile /dlc/fs/swap/swap.192.168.1.4
65 # with `dd if=/dev/zero of=swap.192.168.1.4 bs=1m count=32' and the
66 # filesystem /dlc/fs/quux2 with `cd /usr/src; make buildworld; make
67 # installworld DESTDIR=/dlc/fs/quux2'. Then use Etherboot for booting.
68 host quux2 {
69 hardware ethernet 01:02:03:00:00:02;
70 fixed-address 192.168.1.4;
71 next-server 192.168.1.2;
72 option tftp-server-name "192.168.1.2";
73 filename "kernel.quux";
74 always-reply-rfc1048 on;
75 option root-path "192.168.1.2:/dlc/fs/quux2";
76 option freebsd-rootopts "rw,noatime";
77 option swap-server 192.168.1.2;
78 option freebsd-swappath "192.168.1.2:/dlc/fs/swap";
79 option freebsd-swapopts "sw";
80 }
81 }
83 # The list of clients we know, but which get IP addresses from pool
84 group {
85 host quux3 { hardware ethernet 01:02:03:00:00:03; }
86 host quux4 { hardware ethernet 01:02:03:00:00:04; }
87 }
