dhcpd/dhcpd.spec@c10fb90893b9
dhcpd/dhcpd.spec
Thu, 04 Oct 2012 20:30:05 +0200
- author
- Michael Schloh von Bennewitz <michael@schloh.com>
- date
- Thu, 04 Oct 2012 20:30:05 +0200
- changeset 715
- c10fb90893b9
- parent 686
- 8402f4294f85
- permissions
- -rw-r--r--
Correct out of date build configuration, porting to Solaris 11 network
link infrastructure and new libpcap logic. This additionally allows for
device drivers in subdirectories of /dev. Correct packaged nmap
personalities and signatures to work out of the box. Finally, hack
arpd logic to properly close sockets and quit on TERM by repeating
signaling in the run command script. Sadly, all this fails to correct
the run time behaviour of honeyd which fails to bind to the IP layer.
1 ##
2 ## dhcpd.spec -- OpenPKG RPM Package Specification
3 ## Copyright (c) 2000-2011 OpenPKG Foundation e.V. <http://openpkg.net/>
4 ##
5 ## Permission to use, copy, modify, and distribute this software for
6 ## any purpose with or without fee is hereby granted, provided that
7 ## the above copyright notice and this permission notice appear in all
8 ## copies.
9 ##
10 ## THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
11 ## WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
12 ## MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
13 ## IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
14 ## CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
15 ## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
16 ## LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
17 ## USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
18 ## ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
19 ## OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
20 ## OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
21 ## SUCH DAMAGE.
22 ##
24 # package version
25 %define V_opkg 4.2.4
26 %define V_dist 4.2.4
28 # package information
29 Name: dhcpd
30 Summary: DHCP Daemon
31 URL: http://www.isc.org/products/DHCP/
32 Vendor: Internet Software Consortium
33 Packager: OpenPKG Foundation e.V.
34 Distribution: OpenPKG Community
35 Class: BASE
36 Group: DHCP
37 License: ISC/BSD
38 Version: %{V_opkg}
39 Release: 20120800
41 # package options
42 %option with_fsl yes
44 # list of sources
45 Source0: ftp://ftp.isc.org/isc/dhcp/dhcp-%{V_dist}/dhcp-%{V_dist}.tar.gz
46 Source1: dhcpd.conf
47 Source2: rc.dhcpd
48 Source3: fsl.dhcpd
49 Patch0: dhcpd.patch
51 # build information
52 BuildPreReq: OpenPKG, openpkg >= 20100101, make
53 PreReq: OpenPKG, openpkg >= 20100101
54 BuildPreReq: openssl
55 PreReq: openssl
56 %if "%{with_fsl}" == "yes"
57 BuildPreReq: fsl
58 PreReq: fsl
59 %endif
61 %description
62 This is the ISC DHCP daemon reference implementation.
64 %track
65 prog dhcpd = {
66 version = %{V_dist}
67 url = ftp://ftp.isc.org/isc/dhcp/
68 regex = dhcp-(\d+\.\d+\.\d+)
69 }
71 %prep
72 %setup -q -n dhcp-%{V_dist}
73 %patch -p0
75 %build
76 # configure program
77 %{l_shtool} subst \
78 -e 's;^[^#]*\(#define[^_]*_PATH_DHCPD_PID[^"]*\).*;\1 "%{l_prefix}/var/dhcpd/run/dhcpd.pid";' \
79 -e 's;^[^#]*\(#define[^_]*_PATH_DHCPD_DB[^"]*\).*;\1 "%{l_prefix}/var/dhcpd/db/dhcpd.leases";' \
80 -e 's;^[^#]*\(#define[^_]*_PATH_DHCPD_CONF[^"]*\).*;\1 "%{l_prefix}/etc/dhcpd/dhcpd.conf";' \
81 includes/site.h
82 confopts=''
83 case "%{l_platform -t}" in
84 *-sunos5.11 )
85 confopts='--enable-use-sockets --enable-ipv4-pktinfo'
86 ;;
87 esac
88 CC="%{l_cc}" \
89 CFLAGS="%{l_cflags -O}" \
90 CPPFLAGS="%{l_cppflags} -DNOMINUM" \
91 LDFLAGS="%{l_ldflags} %{l_fsl_ldflags}" \
92 LIBS="%{l_fsl_libs}" \
93 ./configure \
94 --prefix=%{l_prefix} \
95 --mandir=%{l_prefix}/man \
96 --sysconfdir=%{l_prefix}/etc/dhcpd \
97 --localstatedir=%{l_prefix}/var/dhcpd \
98 $confopts \
99 --with-srv-lease-file=%{l_prefix}/var/dhcpd/db/dhcpd.leases \
100 --with-cli-lease-file=%{l_prefix}/var/dhcpd/db/dhclient.leases \
101 --with-srv-pid-file=%{l_prefix}/var/dhcpd/run/dhcpd.pid \
102 --with-cli-pid-file=%{l_prefix}/var/dhcpd/run/dhclient.pid \
103 --with-relay-pid-file=%{l_prefix}/var/dhcpd/run/dhrelay.pid
105 # build program
106 %{l_make} %{l_mflags -O}
108 %install
109 # install program
110 %{l_make} %{l_mflags} install DESTDIR=$RPM_BUILD_ROOT
112 # install default configuration
113 %{l_shtool} install -c -m 644 \
114 %{SOURCE dhcpd.conf} \
115 $RPM_BUILD_ROOT%{l_prefix}/etc/dhcpd/dhcpd.conf
117 # post-adjust and strip down installation
118 rm -f $RPM_BUILD_ROOT%{l_prefix}/sbin/dhclient-script
119 rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man8/dhclient-script.8
120 strip $RPM_BUILD_ROOT%{l_prefix}/bin/* 2>/dev/null || true
121 strip $RPM_BUILD_ROOT%{l_prefix}/sbin/* 2>/dev/null || true
123 # install run-command script
124 %{l_shtool} mkdir -f -p -m 755 \
125 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
126 %{l_shtool} install -c -m 755 %{l_value -s -a} \
127 %{SOURCE rc.dhcpd} $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/
129 # install OSSP fsl configuration
130 %{l_shtool} mkdir -f -p -m 755 $RPM_BUILD_ROOT%{l_prefix}/etc/fsl
131 %{l_shtool} install -c -m 644 %{l_value -s -a} \
132 %{SOURCE fsl.dhcpd} \
133 $RPM_BUILD_ROOT%{l_prefix}/etc/fsl/
135 # create run-time directories
136 %{l_shtool} mkdir -f -p -m 755 \
137 $RPM_BUILD_ROOT%{l_prefix}/var/dhcpd/db \
138 $RPM_BUILD_ROOT%{l_prefix}/var/dhcpd/run \
139 $RPM_BUILD_ROOT%{l_prefix}/var/dhcpd/log
141 # determine installation files
142 %{l_rpmtool} files -v -ofiles -r$RPM_BUILD_ROOT \
143 %{l_files_std} \
144 '%config %{l_prefix}/etc/fsl/fsl.dhcpd' \
145 '%config %{l_prefix}/etc/dhcpd/*'
147 %files -f files
149 %clean
151 %post
152 if [ $1 -eq 1 ]; then
153 # display final hints on initial installation
154 ( echo "Before starting DHCP daemon, please set the configuration variable"
155 echo "\"dhcpd_if\" in $RPM_INSTALL_PREFIX/etc/rc.conf to the name of the"
156 echo "used network interface."
157 ) | %{l_rpmtool} msg -b -t notice
158 fi
160 # after upgrade, restart service
161 [ $1 -eq 2 ] || exit 0
162 eval `%{l_rc} dhcpd status 2>/dev/null`
163 [ ".$dhcpd_active" = .yes ] && %{l_rc} dhcpd restart
164 exit 0
166 %preun
167 # before erase, stop service and remove log files
168 [ $1 -eq 0 ] || exit 0
169 %{l_rc} dhcpd stop 2>/dev/null
170 rm -f $RPM_INSTALL_PREFIX/var/dhcpd/db/* >/dev/null 2>&1 || true
171 rm -f $RPM_INSTALL_PREFIX/var/dhcpd/run/* >/dev/null 2>&1 || true
172 exit 0
