OpenPKG Specs: asterisk/asterisk.conf@f29abea29121

     1 ;;

     2 ;;  asterisk.conf -- Asterisk main configuration file

     3 ;;

     5 ;[directories]

     6 ; Make sure these directories have the right permissions if not

     7 ; running Asterisk as root

     9 ; Where the configuration files (except for this one) are located

    10 ;astetcdir => /etc/asterisk

    12 ; Where the Asterisk loadable modules are located

    13 ;astmoddir => /usr/lib/asterisk/modules

    15 ; Where additional 'library' elements (scripts, etc.) are located

    16 ;astvarlibdir => /var/lib/asterisk

    18 ; Where AGI scripts/programs are located

    19 ;astagidir => /var/lib/asterisk/agi-bin

    21 ; Where spool directories are located

    22 ; Voicemail, monitor, dictation and other apps will create files here

    23 ; and outgoing call files (used with pbx_spool) must be placed here

    24 ;astspooldir => /var/spool/asterisk

    26 ; Where the Asterisk process ID (pid) file should be created

    27 ;astrundir => /var/run/asterisk

    29 ; Where the Asterisk log files should be created

    30 ;astlogdir => /var/log/asterisk

    33 ;[options]

    34 ;Under "options" you can enter configuration options

    35 ;that you also can set with command line options

    37 ;verbose = 0					; Verbosity level for logging (-v)

    38 ;debug = 3					; Debug: "No" or value (1-4)

    39 ;nofork=yes | no					; Background execution disabled (-f)

    40 ;alwaysfork=yes | no				; Always background, even with -v or -d (-F)

    41 ;console= yes | no				; Console mode (-c)

    42 ;highpriority = yes | no				; Execute with high priority (-p)

    43 ;initcrypto = yes | no				; Initialize crypto at startup (-i)

    44 ;nocolor = yes | no				; Disable ANSI colors (-n)

    45 ;dumpcore = yes | no				; Dump core on failure (-g)

    46 ;quiet = yes | no				; Run quietly (-q)

    47 ;timestamp = yes | no				; Force timestamping in CLI verbose output (-T)

    48 ;runuser = asterisk				; User to run asterisk as (-U) NOTE: will require changes to

    49 						; directory and device permissions

    50 ;rungroup = asterisk				; Group to run asterisk as (-G)

    51 ;internal_timing = yes | no			; Enable internal timing support (-I)

    53 ;These options have no command line equivalent

    54 ;cache_record_files = yes | no			; Cache record() files in another directory until completion

    55 ;record_cache_dir = <dir>

    56 ;transcode_via_sln = yes | no 			; Build transcode paths via SLINEAR

    57 ;transmit_silence_during_record = yes | no	; send SLINEAR silence while channel is being recorded

    58 ;maxload = 1.0					; The maximum load average we accept calls for

    59 ;maxcalls = 255					; The maximum number of concurrent calls you want to allow

    60 ;execincludes = yes | no 			; Allow #exec entries in configuration files

    61 ;dontwarn = yes | no				; Don't over-inform the Asterisk sysadm, he's a guru

    62 ;systemname = <a_string>				; System name. Used to prefix CDR uniqueid and to fill ${SYSTEMNAME}

    63 ;languageprefix = yes | no			; Should language code be last component of sound file name or first?

    64 	       	       				; when off, sound files are searched as <path>/<lang>/<file>

    65 						; when on, sound files are search as <lang>/<path>/<file>

    66 						; (only affects relative paths for sound files)

    68 ;[files]

    69 ; Changing the following lines may compromise your security

    70 ; Asterisk.ctl is the pipe that is used to connect the remote CLI

    71 ; (asterisk -r) to Asterisk. Changing these settings change the

    72 ; permissions and ownership of this file.

    73 ; The file is created when Asterisk starts, in the "astrundir" above.

    75 ;astctlpermissions = 0660

    76 ;astctlowner = root

    77 ;astctlgroup = asterisk

    78 ;astctl = asterisk.ctl

OpenPKG Specs / file revision