michael@13: #!@l_prefix@/lib/openpkg/bash --noprofile
michael@13: ##
michael@428: ## rc -- OpenPKG Run-Command Processor
michael@428: ## Copyright (c) 2000-2012 OpenPKG GmbH
michael@13: ##
michael@428: ## This software is property of the OpenPKG GmbH, DE MUC HRB 160208.
michael@428: ## All rights reserved. Licenses which grant limited permission to use,
michael@428: ## copy, modify and distribute this software are available from the
michael@428: ## OpenPKG GmbH.
michael@13: ##
michael@428: ## THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED
michael@13: ## WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
michael@13: ## MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
michael@13: ## IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
michael@13: ## CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
michael@13: ## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
michael@13: ## LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
michael@13: ## USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
michael@13: ## ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
michael@13: ## OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
michael@13: ## OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
michael@13: ## SUCH DAMAGE.
michael@13: ##
michael@13:
michael@13: ##
michael@13: ## configuration
michael@13: ##
michael@13:
michael@13: # program name, version and date
michael@13: progname="rc"
michael@428: progvers="1.2.1"
michael@428: progdate="2007-12-27"
michael@13:
michael@13: # path to OpenPKG instance
michael@13: prefix="@l_prefix@"
michael@13:
michael@13: # path to GNU bash and GNU shtool
michael@13: bash="$prefix/lib/openpkg/bash"
michael@13: shtool="$prefix/lib/openpkg/shtool"
michael@13:
michael@13: # path to rc.d, rc.conf and rc.func
michael@13: rcdir="$prefix/etc/rc.d"
michael@13: rcconf="$prefix/etc/rc.conf"
michael@13: rcfunc="$prefix/etc/rc.func"
michael@13:
michael@13: # helper variables
michael@13: NL="
michael@13: "
michael@13:
michael@13: ##
michael@428: ## temporary file handling
michael@428: ##
michael@428:
michael@428: # establish secure temporary directory
michael@428: i=0
michael@428: while [ $i -lt 10 ]; do
michael@428: tmpdir="/tmp/rc-`date '+%Y%m%d%H%M%S'`-$$"
michael@428: (umask 022; mkdir $tmpdir >/dev/null 2>&1) && break
michael@428: i=$(($i + 1))
michael@428: sleep 1
michael@428: done
michael@428: if [ $i -eq 10 ]; then
michael@428: echo "openpkg:rc:ERROR: unable to establish secure temporary directory" 1>&2
michael@428: exit 1
michael@428: fi
michael@428: declare -r tmpdir
michael@428: cleanup () {
michael@428: if [ ".$tmpdir" != . ]; then
michael@428: if [ -d $tmpdir ]; then
michael@428: rm -rf $tmpdir >/dev/null 2>&1 || true
michael@428: fi
michael@428: fi
michael@428: }
michael@428: trap "cleanup; trap - EXIT INT ABRT QUIT TERM" EXIT INT ABRT QUIT TERM
michael@428:
michael@428: # determine reasonable temporary files
michael@428: tmpfile="$tmpdir/rc.tmp"
michael@428: outfile="$tmpdir/rc.out"
michael@428: errfile="$tmpdir/rc.err"
michael@428: allfile="$tmpdir/rc.all"
michael@428: deffile="$tmpdir/rc.def"
michael@428:
michael@428: # initialize files
michael@428: cp /dev/null $deffile
michael@428:
michael@428: ##
michael@13: ## command line option parsing
michael@13: ##
michael@13:
michael@13: # default parameters
michael@13: silent=0
michael@13: verbose=0
michael@13: debug=0
michael@13: help=0
michael@13: keep=0
michael@13: print=0
michael@13: eval=0
michael@13: config=0
michael@13: query=0
michael@13:
michael@13: # iterate over argument line
michael@13: while [ $# -gt 0 ]; do
michael@428: case "$1" in
michael@13: -s|--silent ) silent=1 ;;
michael@13: -v|--verbose ) verbose=1 ;;
michael@13: -d|--debug ) debug=1 ;;
michael@13: -h|--help ) help="Usage" ;;
michael@13: -k|--keep ) keep=1 ;;
michael@13: -p|--print ) print=1 ;;
michael@13: -e|--eval ) eval=1 ;;
michael@13: -c|--config ) config=1 ;;
michael@13: -q|--query ) query=1 ;;
michael@428: -D|--define ) echo "@$2" | \
michael@428: sed -e "s;';\\\\';g" | \
michael@428: sed -e "s;^@\\([a-z][a-zA-Z0-9_]*\\)=\\(.*\\)\$;\1='\2';" \
michael@428: -e "s;^@.*;;" >>$deffile; shift ;;
michael@428: -* ) help="Invalid option \`$1'"; break ;;
michael@428: * ) break ;;
michael@13: esac
michael@13: shift
michael@13: done
michael@13:
michael@13: # display error or usage message
michael@13: if [ ".$help" != .0 ]; then
michael@13: if [ ".$help" != ".Usage" ]; then
michael@13: echo "$progname:ERROR: $help" 1>&2
michael@13: fi
michael@13: echo "Usage: $progname [-s|--silent] [-v|--verbose] [-d|--debug] [-k|--keep] [-h|--help]" 1>&2
michael@428: echo " [-p|--print] [-e|--eval] [-c|--config] [-q|--query] [-D|--define =]" 1>&2
michael@13: echo " [ ...]" 1>&2
michael@13: if [ ".$help" != ".Usage" ]; then
michael@13: exit 1
michael@13: else
michael@13: exit 0
michael@13: fi
michael@13: fi
michael@13:
michael@13: # determine a reasonable default silent/verbose situation in case
michael@13: # nothing was explicitly specified or a conflicting situation was
michael@13: # specified. Else is silent either disabled by default or was
michael@13: # explicitly enabled.
michael@13: if [ $silent -eq $verbose ]; then
michael@13: if [ -t 2 ]; then
michael@13: # stdout connected to a terminal device, so no need to be silent
michael@13: silent=0
michael@13: else
michael@13: # stdout NOT connected to a terminal device, so be silent
michael@13: silent=1
michael@13: fi
michael@13: fi
michael@13:
michael@471: # extend runtime environment with local OpenPKG tools (shtool, rpmtool, etc)
michael@13: PATH_ORIG="$PATH"
michael@428: PATH="$prefix/lib/openpkg/fallback:$PATH"
michael@13: PATH="$prefix/bin:$PATH"
michael@13: PATH="$prefix/sbin:$PATH"
michael@13: PATH="$prefix/lib/openpkg:$PATH"
michael@428: PATH="$prefix/lib/openpkg/override:$PATH"
michael@13:
michael@13: # handle --query option
michael@13: if [ ".$query" = .1 ]; then
michael@13: # suck in all %config sections of all scripts
michael@471: # (rc.openpkg is special: has to be first and requires preinclusion of rc.conf)
michael@13: touch $tmpfile
michael@13: sed <$rcdir/rc.openpkg >>$tmpfile -e "1,/^%config/d" -e '/^%.*/,$d'
michael@13: echo ". $rcconf" >>$tmpfile
michael@428: echo ". $deffile" >>$tmpfile
michael@13: scripts=`/bin/ls $rcdir/rc.* | sed -e "s;^$rcdir/rc\.;;" | egrep -v '^openpkg$'`
michael@13: for s_name in $scripts; do
michael@13: sed <$rcdir/rc.$s_name >>$tmpfile -e "1,/^%config/d" -e '/^%.*/,$d'
michael@13: done
michael@13: . $tmpfile
michael@13:
michael@13: # apply override values to get effective values
michael@13: . $rcconf
michael@428: . $deffile
michael@13:
michael@13: # display variable value
michael@13: for var in $*; do
michael@13: eval "echo \${$var}"
michael@13: done
michael@13:
michael@13: # stop processing immediately
michael@13: exit 0
michael@13: fi
michael@13:
michael@13: # handle --config option
michael@13: if [ ".$config" = .1 ]; then
michael@13: # suck in all %config sections of all scripts
michael@471: # (rc.openpkg is special: has to be first and requires preinclusion of rc.conf)
michael@13: touch $tmpfile
michael@13: sed <$rcdir/rc.openpkg >>$tmpfile -e "1,/^%config/d" -e '/^%.*/,$d'
michael@13: echo ". $rcconf" >>$tmpfile
michael@428: echo ". $deffile" >>$tmpfile
michael@13: scripts=`/bin/ls $rcdir/rc.* | sed -e "s;^$rcdir/rc\.;;" | egrep -v '^openpkg$'`
michael@13: for s_name in $scripts; do
michael@13: sed <$rcdir/rc.$s_name >>$tmpfile -e "1,/^%config/d" -e '/^%.*/,$d'
michael@13: done
michael@13: . $tmpfile
michael@13:
michael@13: # remember default values
michael@13: vars=""
michael@13: OIFS="$IFS"; IFS="$NL"
michael@13: for assign in `egrep '[ ]*[a-zA-Z_][a-zA-Z_0-9]*=' $tmpfile | sort`; do
michael@13: var=`echo "$assign" | sed -e 's;^[ ]*\([a-zA-Z_][a-zA-Z_0-9]*\)=.*;\1;'`
michael@13: vars="$vars $var"
michael@13: eval "${var}_def=\"\$$var\""
michael@13: done
michael@13: IFS="$OIFS"
michael@13:
michael@13: # apply override values to get effective values
michael@13: . $rcconf
michael@428: . $deffile
michael@13:
michael@13: # determine how to print in bold mode in case output
michael@13: # is connected to a terminal device
michael@13: if [ -t 1 ]; then
michael@13: begin_bold=`$shtool echo -e '%B'`
michael@13: end_bold=`$shtool echo -e '%b'`
michael@13: else
michael@13: begin_bold=""
michael@13: end_bold=""
michael@13: fi
michael@13:
michael@13: # iterate over all variables and display name, default and effective value
michael@13: echo "${begin_bold}Configuration Variable Effective Value Default Value${end_bold}"
michael@13: echo "------------------------ ------------------------- -- -------------------------"
michael@13: for var in . $vars; do
michael@13: test ".$var" = .. && continue
michael@13: eval "val=\"\$$var\""
michael@13: eval "def=\"\$${var}_def\""
michael@13: tag="!="
michael@13: begin="$begin_bold"
michael@13: end="$end_bold"
michael@13: if [ ".$val" = ".$def" ]; then
michael@13: tag="=="
michael@13: begin=""
michael@13: end=""
michael@13: fi
michael@13: printf "%s%-24s %-25s %s %-25s%s\n" "$begin" "$var" "\"$val\"" "$tag" "\"$def\"" "$end"
michael@13: done
michael@13:
michael@13: # stop processing immediately
michael@13: exit 0
michael@13: fi
michael@13:
michael@13: # determine script(s) to use and make sure they exist
michael@13: if [ $# -lt 1 ]; then
michael@13: echo "openpkg:rc:ERROR: no package and command(s) specified" 1>&2
michael@13: exit 1
michael@13: fi
michael@13: if [ $# -lt 2 ]; then
michael@13: echo "openpkg:rc:ERROR: no command(s) specified for package" 1>&2
michael@13: exit 1
michael@13: fi
michael@13: scripts="${1/*rc./}"
michael@13: shift
michael@13: isall=0
michael@428: if [ ".$scripts" = ".cron" ]; then
michael@428: # "cron" is an "all" with a random delay (to ensure that multiple
michael@428: # OpenPKG instances do not all startup at exactly the same time)
michael@428: # plus a mutex lock to ensure that multiple OpenPKG cron tasks of
michael@428: # the same OpenPKG instance do not stumble over each other).
michael@428:
michael@428: # determine delay range and timeout
michael@428: case "${1-quarterly}" in
michael@428: monthly ) delay=1800; timeout=28800 ;; # 30m / 8h
michael@428: weekly ) delay=1800; timeout=14400 ;; # 30m / 4h
michael@428: daily ) delay=900; timeout=7200 ;; # 15m / 2h
michael@428: hourly ) delay=600; timeout=3600 ;; # 5m / 1h
michael@428: quarterly|* ) delay=30; timeout=900 ;; # 30s / 15m
michael@428: esac
michael@428:
michael@471: # apply random runtime delay
michael@428: # (hint: $RANDOM is a random value 0..32767)
michael@428: sleep $(( ($RANDOM * $delay) / 32767 ))
michael@428:
michael@471: # wrap ourself for mutual exclusion runtime
michael@428: # and then perform the "all" command
michael@428: cleanup
michael@428: exec $prefix/lib/openpkg/mutex \
michael@428: -t $timeout $prefix/RPM/TMP/openpkg-rc-cron.mutex \
michael@428: sh -c "exec $0 all $*" || exit $?
michael@428: fi
michael@13: if [ ".$scripts" = ".all" ]; then
michael@13: isall=1
michael@13: . $rcconf
michael@428: . $deffile
michael@13: case "$openpkg_rc_all" in
michael@13: [Nn][Oo] | [Ff][Aa][Ll][Ss][Ee] | [Oo][Ff][Ff] | 0 ) exit 0 ;;
michael@13: esac
michael@13: scripts=`/bin/ls $rcdir/rc.* | sed -e "s;^$rcdir/rc\.;;"`
michael@428:
michael@428: # the "all" target is usually called from system startup scripts,
michael@428: # and we really want to ensure that no potentially corrupt
michael@428: # (because of an unclean shutdown of the system) RPM DB journal
michael@428: # files are staying around and preventing the startup of the
michael@428: # OpenPKG instance. When called manually it also doesn't hurt to
michael@428: # cleanup.
michael@428: rm -f $prefix/RPM/DB/__db.* >/dev/null 2>&1 || true
michael@13: else
michael@13: if [ ! -f "$rcdir/rc.$scripts" ]; then
michael@13: echo "openpkg:rc:ERROR: package \"$scripts\" not found" 1>&2
michael@13: exit 1
michael@13: fi
michael@13: fi
michael@13:
michael@471: # determine current runtime user
michael@13: user=`(id -un) 2>/dev/null ||\
michael@13: (id | sed -e 's;^[^(]*(\([^)]*\)).*;\1;') 2>/dev/null ||\
michael@13: (whoami) 2>/dev/null ||\
michael@13: (who am i | cut "-d " -f1) 2>/dev/null ||\
michael@13: echo ${LOGNAME:-${USER}}`
michael@13: if [ ".$user" = . ]; then
michael@13: echo "openpkg:rc:ERROR: unable to determine current username" 1>&2
michael@13: exit 1
michael@13: fi
michael@13:
michael@469: # Avoid handing control to OpenPKG binary logic until
michael@469: # the binary is is ready for prime time on all platforms.
michael@471: ## just call OpenPKG RPM to let it once perform the runtime integrity checks
michael@469: #$prefix/bin/openpkg rpm -q openpkg >/dev/null || exit $?
michael@428:
michael@13: # iterate over the specified commands
michael@13: rv=0
michael@13: cmds="$*"
michael@13: for cmd in $cmds; do
michael@13: # create "all outputs" file for execution operation (i.e. not --print and --eval)
michael@13: if [ ".$print" = .0 -a ".$eval" = .0 ]; then
michael@13: rm -f $allfile
michael@13: touch $allfile
michael@13: fi
michael@13:
michael@13: # find scripts which contain the command and determine
michael@13: # their individual user/priority settings
michael@13: list=''
michael@13: for s_name in $scripts; do
michael@13: enable=yes
michael@13:
michael@13: # check for upgraded package with unresolved configuration file conflicts
michael@13: if [ -d "$prefix/etc/$s_name" -a ".$eval" != .1 ]; then
michael@13: if [ ".`(find $prefix/etc/$s_name -type f -print; find $prefix/etc/$s_name -type l -print) 2>/dev/null | egrep -v '.*/\.(snap|snapshot)/.*' | egrep '.*\.rpm(new|orig|save)$'`" != . ]; then
michael@13: case "$cmd" in
michael@13: start|restart ) type="ERROR" ;;
michael@13: * ) type="WARNING" ;;
michael@13: esac
michael@13: echo "openpkg:rc:${type}: package \"$s_name\" has unresolved configuration file conflicts" 1>&2
michael@13: echo "openpkg:rc:${type}: indicated by \"*.rpm(new|orig|save)\" files in or below the" 1>&2
michael@13: echo "openpkg:rc:${type}: directory \"$prefix/etc/$s_name\". Please resolve first!" 1>&2
michael@13: if [ ".$type" = .ERROR ]; then
michael@13: continue
michael@13: fi
michael@13: fi
michael@13: fi
michael@13:
michael@13: # check whether command exists in script at all
michael@13: cmdline=`grep "^%$cmd" $rcdir/rc.$s_name | sed -e "s;^%$cmd[^ ].*;;"`
michael@13: if [ ".$cmdline" != . ]; then
michael@13: # parse local command options
michael@13: cmdopts=`echo "$cmdline" | sed -e "s;^%$cmd *;;"`
michael@13: s_user=$user
michael@13: s_prio=500
michael@13: s_output=no
michael@13: set -- $cmdopts
michael@13: prev=''
michael@13: for opt
michael@13: do
michael@13: if [ ".$prev" != . ]; then
michael@13: opt="$prev$opt"
michael@13: prev=''
michael@13: fi
michael@13: case $opt in
michael@13: -*=* ) arg=${opt/-*=/} ;;
michael@13: -[a-zA-Z]* ) arg=${opt/-[a-zA-Z0-9]/} ;;
michael@13: *) arg='' ;;
michael@13: esac
michael@13: case $opt in
michael@13: -u|-p ) prev=$opt ;;
michael@13: -e|--enable ) enable=yes ;;
michael@13: -d|--disable ) enable=no ;;
michael@13: -o|--output ) s_output=yes ;;
michael@13: -u*|--user=* ) s_user=$arg ;;
michael@13: -p*|--prio=* ) s_prio=$arg ;;
michael@13: * ) echo "openpkg:rc:WARNING: invalid local option \"$opt\" in \"$rcdir/rc.$s_name:%$cmd\""; break ;;
michael@13: esac
michael@13: shift
michael@13: done
michael@13:
michael@13: # sanity check: is operation supported by current environment?
michael@13: if [ ".$s_user" != ".$user" -a ".$user" != ".root" -a ".$print" = .0 ]; then
michael@13: echo "openpkg:rc:ERROR: $s_name:%$cmd: require root privileges to run as user \"$s_user\"" 1>&2
michael@13: exit 1
michael@13: fi
michael@13:
michael@13: # skip this script if script is disabled
michael@13: if [ ".$enable" != .yes ]; then
michael@13: continue
michael@13: fi
michael@13:
michael@13: # accumulate the determined information
michael@13: list="$list,$s_prio:$s_name:$s_user:$s_output"
michael@13: else
michael@13: # command not found in script
michael@13: if [ ".$isall" = .0 ]; then
michael@13: echo "openpkg:rc:ERROR: $s_name: command \"$cmd\" not found" 1>&2
michael@13: exit 1
michael@13: fi
michael@13: fi
michael@13: done
michael@13:
michael@471: # if operating on all scripts, complain if a nonstandard command
michael@13: # was used and it was not found in any(!) script at all. The
michael@13: # standard commands are accepted to perform no operation if no
michael@13: # packages are currently installed which provide such commands.
michael@13: if [ ".$list" = . -a ".$isall" = .1 ]; then
michael@13: case "$cmd" in
michael@13: start|stop|monthly|weekly|daily|hourly|quarterly )
michael@13: ;;
michael@13: * )
michael@13: echo "openpkg:rc:ERROR: command \"$cmd\" not found in any script" 1>&2
michael@13: rv=1
michael@13: break
michael@13: ;;
michael@13: esac
michael@13: fi
michael@13:
michael@13: # generate global (loop invariant) header for script in case of
michael@13: # --print and --eval (for the execution approach we cannot do
michael@13: # this, because there a new script is generated from scratch for
michael@13: # each package.
michael@13: if [ ".$print" = .1 -o ".$eval" = .1 ]; then
michael@13: rm -f $tmpfile
michael@13: touch $tmpfile
michael@13:
michael@13: # generate: optionally enable shell debugging
michael@13: if [ ".$debug" = .1 ]; then
michael@13: echo "set -x" >>$tmpfile
michael@13: fi
michael@13:
michael@471: # generate: inclusion of the runcommand helper functions
michael@13: echo ". $rcfunc" >>$tmpfile
michael@13:
michael@13: # generate: all %config sections of all(!) scripts. We cannot
michael@13: # just include those which have the current command in it
michael@13: # because by design all command scripts see the %config
michael@13: # section of all(!) scripts. Because of $openpkg_rc_def the
michael@13: # variable, we place the %config section of "openpkg" to the front.
michael@471: # And we have to extra preinclude the rc.conf to allow
michael@13: # rc.conf to override the default of $openpkg_rc_def, too.
michael@13: sed <$rcdir/rc.openpkg >>$tmpfile -e "1,/^%config/d" -e '/^%.*/,$d'
michael@13: echo ". $rcconf" >>$tmpfile
michael@428: echo ". $deffile" >>$tmpfile
michael@13: l_scripts=`/bin/ls $rcdir/rc.* | sed -e "s;^$rcdir/rc\.;;" | egrep -v '^openpkg$'`
michael@13: for l_name in $l_scripts; do
michael@13: sed <$rcdir/rc.$l_name >>$tmpfile -e "1,/^%config/d" -e '/^%.*/,$d'
michael@13: done
michael@13:
michael@13: # generate: inclusion of the application of override variables
michael@13: echo ". $rcconf" >>$tmpfile
michael@428: echo ". $deffile" >>$tmpfile
michael@13:
michael@13: # for --eval redirect stderr and stdout (but remember stdout)
michael@13: # (let stderr pass unfiltered in case of debug mode)
michael@13: if [ ".$eval" = .1 ]; then
michael@13: if [ ".$debug" = .1 ]; then
michael@13: echo "exec 3<&1- 1>/dev/null" >>$tmpfile
michael@13: else
michael@13: echo "exec 3<&1- 1>/dev/null 2>/dev/null" >>$tmpfile
michael@13: fi
michael@13: fi
michael@13: fi
michael@13:
michael@13: # iterate over all packages (in priority order!) where the command
michael@13: # was found in order to execute, print, or evaluate their scripts
michael@13: verbose_pos=0
michael@13: for entry in `echo $list | tr ',' '\012' | sort -n`; do
michael@13: [ ".$entry" = . ] && continue
michael@13:
michael@471: # redetermine the script name, script and whether to print output
michael@13: eval `echo $entry | sed -e 's%^[0-9]*:\(.*\):\(.*\):\(.*\)$%s_name="\1"; s_user="\2"; s_output="\3";%'`
michael@13:
michael@13: # display verbose progress message parts
michael@13: if [ ".$print" = .0 -a ".$eval" = .0 -a ".$silent" = .0 ]; then
michael@13: # line break if we already have output more than 70
michael@13: # characters (notice that usually already more characters
michael@13: # where printed, because of the name of the last script)
michael@13: if [ $verbose_pos -gt 70 ]; then
michael@13: verbose_pos=0
michael@13: echo "" 1>&2
michael@13: fi
michael@13:
michael@13: # display verbose message parts: prefix (on first), separator and package
michael@13: if [ $verbose_pos -eq 0 ]; then
michael@13: output=$(printf "OpenPKG: %s: " "$cmd")
michael@13: echo -n "$output" 1>&2
michael@13: verbose_pos=$(($verbose_pos + ${#output}))
michael@13: output_prefix=""
michael@13: else
michael@13: output_prefix=", "
michael@13: fi
michael@13: output=$(printf "%s%s" "$output_prefix" "$s_name")
michael@13: echo -n "$output" 1>&2
michael@13: verbose_pos=$(($verbose_pos + ${#output}))
michael@13: fi
michael@13:
michael@13: # now operate on the particular script
michael@13: if [ ".$print" = .1 ]; then
michael@13: # special case: under --print we just add the %common and
michael@13: # command scripts to the generated output script and do
michael@13: # not execute anything at this point.
michael@13: sed <$rcdir/rc.$s_name >>$tmpfile -e "1,/^%common/d" -e '/^%.*/,$d'
michael@13: sed <$rcdir/rc.$s_name >>$tmpfile -e "1,/^%$cmd/d" -e '/^%.*/,$d'
michael@13: elif [ ".$eval" = .1 ]; then
michael@13: # special case: under --eval we just add the %common and
michael@13: # command scripts to the generated output script and do
michael@13: # not execute anything at this point. Additionally, we
michael@471: # emulate a real subshell environment.
michael@13: sed <$rcdir/rc.$s_name >>$tmpfile -e "1,/^%common/d" -e '/^%.*/,$d'
michael@13: echo "while [ 1 ]; do" >>$tmpfile
michael@13: sed <$rcdir/rc.$s_name >>$tmpfile -e "1,/^%$cmd/d" -e '/^%.*/,$d' \
michael@13: -e 's/^exit[^;]*/break 99/' -e 's/\([^a-zA-Z0-9_]\)exit[^;]*/\1break 99/g' \
michael@13: -e 's/^return[^;]*/break 99/' -e 's/\([^a-zA-Z0-9_]\)return[^;]*/\1break 99/g'
michael@13: echo "break" >>$tmpfile
michael@13: echo "done" >>$tmpfile
michael@13: else
michael@13: # the regular case of executing the command script directly
michael@13:
michael@13: # prepare temporary files
michael@13: rm -f $tmpfile $outfile $errfile
michael@13: (umask 077; touch $tmpfile $outfile $errfile)
michael@13:
michael@13: # generate: optionally enable shell debugging
michael@13: if [ ".$debug" = .1 ]; then
michael@13: echo "set -x" >>$tmpfile
michael@13: fi
michael@13:
michael@471: # generate: inclusion of the runcommand helper functions
michael@13: echo ". $rcfunc" >>$tmpfile
michael@13:
michael@13: # generate: all %config sections of all(!) scripts. We cannot
michael@13: # just include those which have the current command in it
michael@13: # because by design all command scripts see the %config
michael@13: # section of all(!) scripts. Because of $openpkg_rc_def the
michael@13: # variable, we place the %config section of "openpkg" to the front.
michael@471: # And we have to extra preinclude the rc.conf to allow
michael@13: # rc.conf to override the default of $openpkg_rc_def, too.
michael@13: sed <$rcdir/rc.openpkg >>$tmpfile -e "1,/^%config/d" -e '/^%.*/,$d'
michael@13: echo ". $rcconf" >>$tmpfile
michael@428: echo ". $deffile" >>$tmpfile
michael@13: l_scripts=`/bin/ls $rcdir/rc.* | sed -e "s;^$rcdir/rc\.;;" | egrep -v '^openpkg$'`
michael@13: for l_name in $l_scripts; do
michael@13: sed <$rcdir/rc.$l_name >>$tmpfile -e "1,/^%config/d" -e '/^%.*/,$d'
michael@13: done
michael@13:
michael@13: # generate: inclusion of the application of override variables
michael@13: echo ". $rcconf" >>$tmpfile
michael@428: echo ". $deffile" >>$tmpfile
michael@13:
michael@13: # generate: %common section and particular command section
michael@13: sed <$rcdir/rc.$s_name >>$tmpfile -e "1,/^%common/d" -e '/^%.*/,$d'
michael@13: sed <$rcdir/rc.$s_name >>$tmpfile -e "1,/^%$cmd/d" -e '/^%.*/,$d'
michael@13:
michael@13: # execute the generated script with GNU Bash
michael@13: if [ ".$user" != ".$s_user" ]; then
michael@13: # execute as different user
michael@13: if [ ".$verbose" = .1 ]; then
michael@13: echo "openpkg:rc:NOTICE: $prefix:$s_name:%$cmd: executing as user $s_user"
michael@13: fi
michael@13: if [ ".$user" = ".@l_susr@" -a ".@l_susr@" = ".root" ]; then
michael@13: chown $s_user $tmpfile
michael@13: if [ ".$debug" = .1 ]; then
michael@13: su - $s_user -c "PATH=\"$PATH\"; $bash $tmpfile" >$outfile
michael@13: rc=$?
michael@13: else
michael@13: su - $s_user -c "PATH=\"$PATH\"; $bash $tmpfile" >$outfile 2>$errfile
michael@13: rc=$?
michael@13: fi
michael@13: elif [ ".@l_susr@" != ".root" ]; then
michael@13: # do not complain if we would not have any chance
michael@13: # at all to switch the user because we are running
michael@471: # in a unprivileged instance. Else we would just
michael@13: # trash the mailbox of the user receiving the
michael@471: # output of periodic runcommands.
michael@13: rc=0
michael@13: else
michael@13: echo "openpkg:rc:WARNING: $prefix:$s_name:%$cmd: require root privileges to run as user \"$s_user\"" 1>&2
michael@13: rc=1
michael@13: fi
michael@13: else
michael@13: # execute as current user
michael@13: if [ ".$verbose" = .1 ]; then
michael@13: echo "openpkg:rc:NOTICE: $prefix:$s_name:%$cmd: executing as user $user"
michael@13: fi
michael@13: if [ ".$debug" = .1 ]; then
michael@13: $bash $tmpfile >$outfile
michael@13: rc=$?
michael@13: else
michael@13: $bash $tmpfile >$outfile 2>$errfile
michael@13: rc=$?
michael@13: fi
michael@13: fi
michael@13: if [ $rc -ne 0 ]; then
michael@13: if [ ".$silent" = .0 ]; then
michael@13: # indicate failure of execution on verbose message line
michael@13: echo ":FAILED" 1>&2
michael@13: verbose_pos=0
michael@13: fi
michael@13: # give details of execution failure
michael@13: ( echo "openpkg:rc:WARNING: $prefix:$s_name:%$cmd: failed with return code $rc"
michael@13: if [ ".`cat $outfile $errfile`" != . ]; then
michael@13: echo "openpkg:rc:NOTICE: output from stdout/stderr is following:"
michael@13: echo "+----------------------------------------------------------------------"
michael@13: cat $outfile $errfile | sed -e 's;^;| ;'
michael@13: echo "+----------------------------------------------------------------------"
michael@13: else
michael@13: echo "openpkg:rc:NOTICE: no output occurred on stdout/stderr"
michael@13: fi
michael@13: ) 1>&2
michael@13:
michael@13: # enforce global return value
michael@13: rv=1
michael@13: else
michael@13: # give details of execution success in case verbose operation is requested
michael@13: if [ ".$verbose" = .1 ]; then
michael@13: ( echo "openpkg:rc:NOTICE: $prefix:$s_name:%$cmd: succeeded with return code $rc"
michael@13: if [ ".`cat $outfile $errfile`" != . ]; then
michael@13: echo "openpkg:rc:NOTICE: output from stdout/stderr is following:"
michael@13: echo "+----------------------------------------------------------------------"
michael@13: cat $outfile $errfile | sed -e 's;^;| ;'
michael@13: echo "+----------------------------------------------------------------------"
michael@13: else
michael@13: echo "openpkg:rc:NOTICE: no output occurred on stdout/stderr"
michael@13: fi
michael@13: ) 1>&2
michael@13: fi
michael@13: if [ ".$s_output" = .yes ]; then
michael@13: # accumulate script output for later display
michael@13: cat $outfile >>$allfile
michael@13: fi
michael@13: fi
michael@13: fi
michael@13: done
michael@13:
michael@471: # postprocessing for each command
michael@13: if [ ".$print" = .1 ]; then
michael@13: # for --print just print the resulting script to stdout
michael@13: cat $tmpfile
michael@13: elif [ ".$eval" = .1 ]; then
michael@13: # finish generation of temporary script by restoring stdout
michael@13: # and printing the exported environment variables into a format
michael@13: # suitable for evaluation by the callers shell.
michael@13: echo "exec 1<&3-" >>$tmpfile
michael@13: echo "unset PWD SHLVL" >>$tmpfile
michael@13: echo "env |\\" >>$tmpfile
michael@13: echo "egrep '^[A-Z_][A-Z0-9_]*=.' |\\" >>$tmpfile
michael@13: echo "sed -e '/^_=/d' -e 's/\\\\/\\\\\\\\/g' -e 's/\"/\\\\\"/g' \\" >>$tmpfile
michael@13: case $SHELL in
michael@13: csh|*/csh|tcsh|*/tcsh )
michael@13: echo "-e 's/^\\([^=]*\\)=\\(.*\\)\$/setenv \\1 \"\\2\"/'" >>$tmpfile
michael@13: ;;
michael@13: * )
michael@13: echo "-e 's/^\\([^=]*\\)=\\(.*\\)\$/\\1=\"\\2\"; export \\1/'" >>$tmpfile
michael@13: ;;
michael@13: esac
michael@13:
michael@13: # prepare temporary files
michael@13: rm -f $outfile $errfile
michael@13: touch $outfile $errfile
michael@13:
michael@13: # now replace temporary script with its output
michael@13: # by executing it and capturing its output
michael@13: # (let stderr pass unfiltered in case of debug mode)
michael@13: if [ ".$debug" = .1 ]; then
michael@13: env -i \
michael@13: HOME="$HOME" \
michael@13: USER="$USER" \
michael@13: LOGNAME="$LOGNAME" \
michael@13: TERM="$TERM" \
michael@13: PATH="$PATH_ORIG" \
michael@13: MANPATH="$MANPATH" \
michael@13: INFOPATH="$INFOPATH" \
michael@13: LD_LIBRARY_PATH="$LD_LIBRARY_PATH" \
michael@13: $bash --norc --noprofile --posix \
michael@13: $tmpfile >$outfile
michael@13: else
michael@13: env -i \
michael@13: HOME="$HOME" \
michael@13: USER="$USER" \
michael@13: LOGNAME="$LOGNAME" \
michael@13: TERM="$TERM" \
michael@13: PATH="$PATH_ORIG" \
michael@13: MANPATH="$MANPATH" \
michael@13: INFOPATH="$INFOPATH" \
michael@13: LD_LIBRARY_PATH="$LD_LIBRARY_PATH" \
michael@13: $bash --norc --noprofile --posix \
michael@13: $tmpfile >$outfile 2>/dev/null
michael@13: fi
michael@13: cp $outfile $tmpfile
michael@13:
michael@13: # for --eval we cannot just print the resulting script because
michael@471: # not all Bourne Shell implementations like to "eval" large
michael@471: # multiline outputs. Hence we output a little one liner which
michael@13: # "sources" the script instead and cleans up.
michael@13: case $SHELL in
michael@13: csh|*/csh|tcsh|*/tcsh )
michael@13: echo "source $tmpfile; rm -rf $tmpdir 2>/dev/null || true"
michael@13: ;;
michael@13: * )
michael@13: echo ". $tmpfile; rm -rf $tmpdir 2>/dev/null || true"
michael@13: ;;
michael@13: esac
michael@13: else
michael@13: # for the execution situation just make sure we
michael@13: # terminate the verbose message output.
michael@13: if [ ".$silent" = .0 -a $verbose_pos -gt 0 ]; then
michael@13: echo "." 1>&2
michael@13: fi
michael@13:
michael@13: # additionally, if a script wants its output to be displayed,
michael@13: # now do it. In case there was no such request, do not bother
michael@13: # -- we then just output an empty file and so can avoid an
michael@13: # extra test surrounding the next command.
michael@13: cat $allfile
michael@13: fi
michael@13: done
michael@13:
michael@13: # cleanup temporary files except the result script in
michael@13: # case of --eval (which is then removed by the caller).
michael@13: # keep those files for debugging purposes if requested.
michael@13: if [ ".$keep" = .0 ]; then
michael@13: rm -f $outfile $errfile $allfile >/dev/null 2>&1 || true
michael@13: if [ ".$eval" = .0 ]; then
michael@13: rm -f $tmpfile >/dev/null 2>&1 || true
michael@13: rm -rf $tmpdir >/dev/null 2>&1 || true
michael@13: fi
michael@13: fi
michael@13:
michael@13: # now clean the exit trap and exit with the global return value
michael@13: # indicating to the caller whether all scripts were executed
michael@13: # successfully or at least one failed.
michael@13: trap - EXIT
michael@13: exit $rv
michael@13: