diff -r 3be96a4c8c18 -r f29abea29121 asterisk/manager.conf --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/asterisk/manager.conf Mon Apr 27 12:19:05 2009 +0200 @@ -0,0 +1,56 @@ +; +; AMI - The Asterisk Manager Interface +; +; Third party application call management support and PBX event supervision +; +; This configuration file is read every time someone logs in +; +; Use the "manager list commands" at the CLI to list available manager commands +; and their authorization levels. +; +; "manager show command " will show a help text. +; +; ---------------------------- SECURITY NOTE ------------------------------- +; Note that you should not enable the AMI on a public IP address. If needed, +; block this TCP port with iptables (or another FW software) and reach it +; with IPsec, SSH, or SSL vpn tunnel. You can also make the manager +; interface available over http if Asterisk's http server is enabled in +; http.conf and if both "enabled" and "webenabled" are set to yes in +; this file. Both default to no. httptimeout provides the maximum +; timeout in seconds before a web based session is discarded. The +; default is 60 seconds. +; +;[general] +;displaysystemname = yes +;enabled = no +;webenabled = yes +;port = 5038 + +;httptimeout = 60 +; a) httptimeout sets the Max-Age of the http cookie +; b) httptimeout is the amount of time the webserver waits +; on a action=waitevent request (actually its httptimeout-10) +; c) httptimeout is also the amount of time the webserver keeps +; a http session alive after completing a successful action + +;bindaddr = 0.0.0.0 +;displayconnects = yes +; +; Add a Unix epoch timestamp to events (not action responses) +; +;timestampevents = yes + +;[mark] +;secret = mysecret +;deny=0.0.0.0/0.0.0.0 +;permit=209.16.236.73/255.255.255.0 +; +; If the device connected via this user accepts input slowly, +; the timeout for writes to it can be increased to keep it +; from being disconnected (value is in milliseconds) +; +; writetimeout = 100 +; +; Authorization for various classes +;read = system,call,log,verbose,command,agent,user,config +;write = system,call,log,verbose,command,agent,user,config