The Tor Browser: toolkit/crashreporter/google-breakpad/android/run-checks.sh@129ffea94266 (annotated)

toolkit/crashreporter/google-breakpad/android/run-checks.sh@129ffea94266 (annotated)

toolkit/crashreporter/google-breakpad/android/run-checks.sh

Sat, 03 Jan 2015 20:18:00 +0100

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Sat, 03 Jan 2015 20:18:00 +0100
branch: TOR_BUG_3246
changeset 7: 129ffea94266
permissions: -rwxr-xr-x

Conditionally enable double key logic according to:
private browsing mode or privacy.thirdparty.isolate preference and
implement in GetCookieStringCommon and FindCookie where it counts...
With some reservations of how to convince FindCookie users to test
condition and pass a nullptr when disabling double key logic.

 #!/bin/sh
 # Copyright (c) 2012 Google Inc.
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are
 # met:
 #
 #     * Redistributions of source code must retain the above copyright
 # notice, this list of conditions and the following disclaimer.
 #     * Redistributions in binary form must reproduce the above
 # copyright notice, this list of conditions and the following disclaimer
 # in the documentation and/or other materials provided with the
 # distribution.
 #     * Neither the name of Google Inc. nor the names of its
 # contributors may be used to endorse or promote products derived from
 # this software without specific prior written permission.
 #
 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 # Sanitize the environment
 export LANG=C
 export LC_ALL=C
 if [ "$BASH_VERSION" ]; then
   set -o posix
 fi
 PROGDIR=$(dirname "$0")
 PROGDIR=$(cd "$PROGDIR" && pwd)
 PROGNAME=$(basename "$0")
 . $PROGDIR/common-functions.sh
 DEFAULT_ABI="armeabi"
 VALID_ABIS="armeabi armeabi-v7a x86 mips"
 ABI=
 ADB=
 ALL_TESTS=
 ENABLE_M32=
 HELP=
 HELP_ALL=
 NDK_DIR=
 NO_CLEANUP=
 NO_DEVICE=
 NUM_JOBS=$(get_core_count)
 TMPDIR=
 for opt do
   # The following extracts the value if the option is like --name=<value>.
   optarg=$(expr -- $opt : '^--[^=]*=\(.*\)$')
   case $opt in
     --abi=*) ABI=$optarg;;
     --adb=*) ADB=$optarg;;
     --all-tests) ALL_TESTS=true;;
     --enable-m32) ENABLE_M32=true;;
     --help|-h|-?) HELP=TRUE;;
     --help-all) HELP_ALL=true;;
     --jobs=*) NUM_JOBS=$optarg;;
     --ndk-dir=*) NDK_DIR=$optarg;;
     --tmp-dir=*) TMPDIR=$optarg;;
     --no-cleanup) NO_CLEANUP=true;;
     --no-device) NO_DEVICE=true;;
     --quiet) decrease_verbosity;;
     --verbose) increase_verbosity;;
     -*) panic "Invalid option '$opt', see --help for details.";;
     *) panic "This script doesn't take any parameters. See --help for details."
        ;;
   esac
 done
 if [ "$HELP" -o "$HELP_ALL" ]; then
   echo "\
   Usage: $PROGNAME [options]
   This script is used to check that your Google Breakpad source tree can
   be properly built for Android, and that the client library and host tools
   work properly together.
 "
   if [ "$HELP_ALL" ]; then
     echo "\
   In more details, this script will:
   - Rebuild the host version of Google Breakpad in a temporary
     directory (with the Auto-tools based build system).
   - Rebuild the Android client library with the Google Breakpad build
     system (using autotools/configure). This requires that you define
     ANDROID_NDK_ROOT in your environment to point to a valid Android NDK
     installation directory, or use the --ndk-dir=<path> option.
   - Rebuild the Android client library and a test crashing program with the
     Android NDK build system (ndk-build).
   - Require an Android device connected to your machine, and the 'adb'
     tool in your path. They are used to:
       - Install and  run a test crashing program.
       - Extract the corresponding minidump from the device.
       - Dump the symbols from the test program on the host with 'dump_syms'
       - Generate a stack trace with 'minidump_stackwalk'
       - Check the stack trace content for valid source file locations.
     You can however skip this requirement and only test the builds by using
     the --no-device flag.
     By default, all generated files will be created in a temporary directory
     that is removed when the script completion. If you want to inspect the
     files, use the --no-cleanup option.
     Finally, use --verbose to increase the verbosity level, this will help
     you see which exact commands are being issues and their result. Use the
     flag twice for even more output. Use --quiet to decrease verbosity
     instead and run the script silently.
     If you have a device connected, the script will probe it to determine
     its primary CPU ABI, and build the test program for it. You can however
     use the --abi=<name> option to override this (this can be useful to check
     the secondary ABI, e.g. using --abi=armeabi to check that such a program
     works correctly on an ARMv7-A device).
     If you don't have a device connected, the test program will be built (but
     not run) with the default '$DEFAULT_ABI' ABI. Again, you can use
     --abi=<name> to override this. Valid ABI names are:
         $VALID_ABIS
     The script will only run the client library unit test on the device
     by default. You can use --all-tests to also build and run the unit
     tests for the Breakpad tools and processor, but be warned that this
     adds several minutes of testing time. --all-tests will also run the
     host unit tests suite.
 "
   fi  # HELP_ALL
   echo "\
   Valid options:
       --help|-h|-?     Display this message.
       --help-all       Display extended help.
       --enable-m32     Build 32-bit version of host tools.
       --abi=<name>     Specify target CPU ABI [auto-detected].
       --jobs=<count>   Run <count> build tasks in parallel [$NUM_JOBS].
       --ndk-dir=<path> Specify NDK installation directory.
       --tmp-dir=<path> Specify temporary directory (will be wiped-out).
       --adb=<path>     Specify adb program path.
       --no-cleanup     Don't remove temporary directory after completion.
       --no-device      Do not try to detect devices, nor run crash test.
       --all-tests      Run all unit tests (i.e. tools and processor ones too).
       --verbose        Increase verbosity.
       --quiet          Decrease verbosity."
   exit 0
 fi
 TESTAPP_DIR=$PROGDIR/sample_app
 # Select NDK install directory.
 if [ -z "$NDK_DIR" ]; then
   if [ -z "$ANDROID_NDK_ROOT" ]; then
     panic "Please define ANDROID_NDK_ROOT in your environment, or use \
 --ndk-dir=<path>."
   fi
   NDK_DIR="$ANDROID_NDK_ROOT"
   log "Found NDK directory: $NDK_DIR"
 else
   log "Using NDK directory: $NDK_DIR"
 fi
 # Small sanity check.
 NDK_BUILD="$NDK_DIR/ndk-build"
 if [ ! -f "$NDK_BUILD" ]; then
   panic "Your NDK directory is not valid (missing ndk-build): $NDK_DIR"
 fi
 # Ensure the temporary directory is deleted on exit, except if the --no-cleanup
 # option is used.
 clean_tmpdir () {
   if [ "$TMPDIR" ]; then
     if [ -z "$NO_CLEANUP" ]; then
       log "Cleaning up: $TMPDIR"
       rm -rf "$TMPDIR"
     else
       dump "Temporary directory contents preserved: $TMPDIR"
     fi
   fi
   exit "$@"
 }
 atexit clean_tmpdir
 # If --tmp-dir=<path> is not used, create a temporary directory.
 # Otherwise, start by cleaning up the user-provided path.
 if [ -z "$TMPDIR" ]; then
   TMPDIR=$(mktemp -d /tmp/$PROGNAME.XXXXXXXX)
   fail_panic "Can't create temporary directory!"
   log "Using temporary directory: $TMPDIR"
 else
   if [ ! -d "$TMPDIR" ]; then
     mkdir -p "$TMPDIR"
     fail_panic "Can't create temporary directory: $TMPDIR"
   else
     log "Cleaning up temporary directory: $TMPDIR"
     rm -rf "$TMPDIR"/*
     fail_panic "Cannot cleanup temporary directory!"
   fi
 fi
 if [ -z "$NO_DEVICE" ]; then
   if ! adb_check_device $ADB; then
     echo "$(adb_get_error)"
     echo "Use --no-device to build the code without running any tests."
     exit 1
   fi
 fi
 BUILD_LOG="$TMPDIR/build.log"
 RUN_LOG="$TMPDIR/run.log"
 CRASH_LOG="$TMPDIR/crash.log"
 set_run_log "$RUN_LOG"
 TMPHOST="$TMPDIR/host-local"
 cd "$TMPDIR"
 # Build host version of the tools
 dump "Building host binaries."
 CONFIGURE_FLAGS=
 if [ "$ENABLE_M32" ]; then
   CONFIGURE_FLAGS="$CONFIGURE_FLAGS --enable-m32"
 fi
 (
   run mkdir "$TMPDIR/build-host" &&
   run cd "$TMPDIR/build-host" &&
   run2 "$PROGDIR/../configure" --prefix="$TMPHOST" $CONFIGURE_FLAGS &&
   run2 make -j$NUM_JOBS install
 )
 fail_panic "Can't build host binaries!"
 if [ "$ALL_TESTS" ]; then
   dump "Running host unit tests."
   (
     run cd "$TMPDIR/build-host" &&
     run2 make -j$NUM_JOBS check
   )
   fail_panic "Host unit tests failed!!"
 fi
 TMPBIN=$TMPHOST/bin
 # Generate a stand-alone NDK toolchain
 # Extract CPU ABI and architecture from device, if any.
 if adb_check_device; then
   DEVICE_ABI=$(adb_shell getprop ro.product.cpu.abi)
   DEVICE_ABI2=$(adb_shell getprop ro.product.cpu.abi2)
   if [ -z "$DEVICE_ABI" ]; then
     panic "Can't extract ABI from connected device!"
   fi
   if [ "$DEVICE_ABI2" ]; then
     dump "Found device ABIs: $DEVICE_ABI $DEVICE_ABI2"
   else
     dump "Found device ABI: $DEVICE_ABI"
     DEVICE_ABI2=$DEVICE_ABI
   fi
   # If --abi=<name> is used, check that the device supports it.
   if [ "$ABI" -a "$DEVICE_ABI" != "$ABI" -a "$DEVICE_ABI2" != "$ABI" ]; then
     dump  "ERROR: Device ABI(s) do not match --abi command-line value ($ABI)!"
     panic "Please use --no-device to skip device tests."
   fi
   if [ -z "$ABI" ]; then
     ABI=$DEVICE_ABI
     dump "Using CPU ABI: $ABI (device)"
   else
     dump "Using CPU ABI: $ABI (command-line)"
   fi
 else
   if [ -z "$ABI" ]; then
     # No device connected, choose default ABI
     ABI=$DEFAULT_ABI
     dump "Using CPU ABI: $ABI (default)"
   else
     dump "Using CPU ABI: $ABI (command-line)"
   fi
 fi
 # Check the ABI value
 VALID=
 for VALID_ABI in $VALID_ABIS; do
   if [ "$ABI" = "$VALID_ABI" ]; then
     VALID=true
     break
   fi
 done
 if [ -z "$VALID" ]; then
   panic "Unknown CPU ABI '$ABI'. Valid values are: $VALID_ABIS"
 fi
 # Extract architecture name from ABI
 case $ABI in
   armeabi*) ARCH=arm;;
   *) ARCH=$ABI;;
 esac
 # Extract GNU configuration name
 case $ARCH in
   arm)
     GNU_CONFIG=arm-linux-androideabi
     ;;
   x86)
     GNU_CONFIG=i686-linux-android
     ;;
   *)
     GNU_CONFIG="$ARCH-linux-android"
     ;;
 esac
 # Generate standalone NDK toolchain installation
 NDK_STANDALONE="$TMPDIR/ndk-$ARCH-toolchain"
 echo "Generating NDK standalone toolchain installation"
 mkdir -p "$NDK_STANDALONE"
 # NOTE: The --platform=android-9 is required to provide <regex.h> for GTest.
 run "$NDK_DIR/build/tools/make-standalone-toolchain.sh" \
       --arch="$ARCH" \
       --platform=android-9 \
       --install-dir="$NDK_STANDALONE"
 fail_panic "Can't generate standalone NDK toolchain installation!"
 # Rebuild the client library, processor and tools with the auto-tools based
 # build system. Even though it's not going to be used, this checks that this
 # still works correctly.
 echo "Building full Android binaries with configure/make"
 TMPTARGET="$TMPDIR/target-local"
 (
   PATH="$NDK_STANDALONE/bin:$PATH"
   run mkdir "$TMPTARGET" &&
   run mkdir "$TMPDIR"/build-target &&
   run cd "$TMPDIR"/build-target &&
   run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
                                --host="$GNU_CONFIG" &&
   run2 make -j$NUM_JOBS install
 )
 fail_panic "Could not rebuild Android binaries!"
 # Build and/or run unit test suite.
 # If --no-device is used, only rebuild it, otherwise, run in on the
 # connected device.
 if [ "$NO_DEVICE" ]; then
   ACTION="Building"
   # This is a trick to force the Makefile to ignore running the scripts.
   TESTS_ENVIRONMENT="TESTS_ENVIRONMENT=true"
 else
   ACTION="Running"
   TESTS_ENVIRONMENT=
 fi
 (
   PATH="$NDK_STANDALONE/bin:$PATH"
   run cd "$TMPDIR"/build-target &&
   # Reconfigure to only run the client unit test suite.
   # This one should _never_ fail.
   dump "$ACTION Android client library unit tests."
   run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
                                --host="$GNU_CONFIG" \
                                --disable-tools \
                                --disable-processor &&
   run make -j$NUM_JOBS check $TESTS_ENVIRONMENT || exit $?
   if [ "$ALL_TESTS" ]; then
     dump "$ACTION Tools and processor unit tests."
     # Reconfigure to run the processor and tools tests.
     # Most of these fail for now, so do not worry about it.
     run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
                                  --host="$GNU_CONFIG" &&
     run make -j$NUM_JOBS check $TESTS_ENVIRONMENT
     if [ $? != 0 ]; then
       dump "Tools and processor unit tests failed as expected. \
 Use --verbose for results."
     fi
   fi
 )
 fail_panic "Client library unit test suite failed!"
 # Copy sources to temporary directory
 PROJECT_DIR=$TMPDIR/project
 dump "Copying test program sources to: $PROJECT_DIR"
 run cp -r "$TESTAPP_DIR" "$PROJECT_DIR" &&
 run rm -rf "$PROJECT_DIR/obj" &&
 run rm -rf "$PROJECT_DIR/libs"
 fail_panic "Could not copy test program sources to: $PROJECT_DIR"
 # Build the test program with ndk-build.
 dump "Building test program with ndk-build"
 export NDK_MODULE_PATH="$PROGDIR"
 NDK_BUILD_FLAGS="-j$NUM_JOBS"
 if verbosity_is_higher_than 1; then
   NDK_BUILD_FLAGS="$NDK_BUILD_FLAGS NDK_LOG=1 V=1"
 fi
 run "$NDK_DIR/ndk-build" -C "$PROJECT_DIR" $NDK_BUILD_FLAGS APP_ABI=$ABI
 fail_panic "Can't build test program!"
 # Unless --no-device was used, stop right here if ADB isn't in the path,
 # or there is no connected device.
 if [ "$NO_DEVICE" ]; then
   dump "Done. Please connect a device to run all tests!"
   clean_exit 0
 fi
 # Push the program to the device.
 TESTAPP=test_google_breakpad
 TESTAPP_FILE="$PROJECT_DIR/libs/$ABI/test_google_breakpad"
 if [ ! -f "$TESTAPP_FILE" ]; then
   panic "Device requires '$ABI' binaries. None found!"
 fi
 # Run the program there
 dump "Installing test program on device"
 DEVICE_TMP=/data/local/tmp
 adb_push "$TESTAPP_FILE" "$DEVICE_TMP/"
 fail_panic "Cannot push test program to device!"
 dump "Running test program on device"
 adb_shell cd "$DEVICE_TMP" "&&" ./$TESTAPP > "$CRASH_LOG" 2>/dev/null
 if [ $? = 0 ]; then
   panic "Test program did *not* crash as expected!"
 fi
 if verbosity_is_higher_than 0; then
   echo -n "Crash log: "
   cat "$CRASH_LOG"
 fi
 # Extract minidump from device
 MINIDUMP_NAME=$(awk '$1 == "Dump" && $2 == "path:" { print $3; }' "$CRASH_LOG")
 MINIDUMP_NAME=$(basename "$MINIDUMP_NAME")
 if [ -z "$MINIDUMP_NAME" ]; then
   panic "Test program didn't write minidump properly!"
 fi
 dump "Extracting minidump: $MINIDUMP_NAME"
 adb_pull "$DEVICE_TMP/$MINIDUMP_NAME" .
 fail_panic "Can't extract minidump!"
 dump "Parsing test program symbols"
 if verbosity_is_higher_than 1; then
   log "COMMAND: $TMPBIN/dump_syms \
                 $PROJECT_DIR/obj/local/$ABI/$TESTAPP >$TESTAPP.sym"
 fi
 "$TMPBIN/dump_syms" "$PROJECT_DIR/obj/local/$ABI/$TESTAPP" > $TESTAPP.sym
 fail_panic "dump_syms doesn't work!"
 VERSION=$(awk '$1 == "MODULE" { print $4; }' $TESTAPP.sym)
 dump "Found module version: $VERSION"
 if [ -z "$VERSION" ]; then
   echo "ERROR: Can't find proper module version from symbol dump!"
   head -n5 $TESTAPP.sym
   clean_exit 1
 fi
 run mkdir -p "$TMPDIR/symbols/$TESTAPP/$VERSION"
 run mv $TESTAPP.sym "$TMPDIR/symbols/$TESTAPP/$VERSION/"
 dump "Generating stack trace"
 # Don't use 'run' to be able to send stdout and stderr to two different files.
 log "COMMAND: $TMPBIN/minidump_stackwalk $MINIDUMP_NAME symbols"
 "$TMPBIN/minidump_stackwalk" $MINIDUMP_NAME \
                              "$TMPDIR/symbols" \
                              > "$BUILD_LOG" 2>>"$RUN_LOG"
 fail_panic "minidump_stackwalk doesn't work!"
 dump "Checking stack trace content"
 if verbosity_is_higher_than 1; then
   cat "$BUILD_LOG"
 fi
 # The generated stack trace should look like the following:
 #
 # Thread 0 (crashed)
 #  0  test_google_breakpad!crash [test_breakpad.cpp : 17 + 0x4]
 #      r4 = 0x00015530    r5 = 0xbea2cbe4    r6 = 0xffffff38    r7 = 0xbea2cb5c
 #      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
 #      sp = 0xbea2cb50    lr = 0x00009025    pc = 0x00008f84
 #     Found by: given as instruction pointer in context
 #  1  test_google_breakpad!main [test_breakpad.cpp : 25 + 0x3]
 #      r4 = 0x00015530    r5 = 0xbea2cbe4    r6 = 0xffffff38    r7 = 0xbea2cb5c
 #      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
 #      sp = 0xbea2cb50    pc = 0x00009025
 #     Found by: call frame info
 #  2  libc.so + 0x164e5
 #      r4 = 0x00008f64    r5 = 0xbea2cc34    r6 = 0x00000001    r7 = 0xbea2cc3c
 #      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
 #      sp = 0xbea2cc18    pc = 0x400c34e7
 #     Found by: call frame info
 # ...
 #
 # The most important part for us is ensuring that the source location could
 # be extracted, so look at the 'test_breakpad.cpp' references here.
 #
 # First, extract all the lines with test_google_breakpad! in them, and
 # dump the corresponding crash location.
 #
 # Note that if the source location can't be extracted, the second field
 # will only be 'test_google_breakpad' without the exclamation mark.
 #
 LOCATIONS=$(awk '$2 ~ "^test_google_breakpad!.*" { print $3; }' "$BUILD_LOG")
 if [ -z "$LOCATIONS" ]; then
   if verbosity_is_lower_than 1; then
     cat "$BUILD_LOG"
   fi
   panic "No source location found in stack trace!"
 fi
 # Now check that they all match "[<source file>"
 BAD_LOCATIONS=
 for LOCATION in $LOCATIONS; do
   case $LOCATION in
     # Escape the opening bracket, or some shells like Dash will not
     # match them properly.
     \[*.cpp|\[*.cc|\[*.h) # These are valid source locations in our executable
       ;;
     *) # Everything else is not!
       BAD_LOCATIONS="$BAD_LOCATIONS $LOCATION"
       ;;
   esac
 done
 if [ "$BAD_LOCATIONS" ]; then
   dump "ERROR: Generated stack trace doesn't contain valid source locations:"
   cat "$BUILD_LOG"
   echo "Bad locations are: $BAD_LOCATIONS"
   exit 1
 fi
 echo "All clear! Congratulations."

The Tor Browser / annotate

toolkit/crashreporter/google-breakpad/android/run-checks.sh@129ffea94266 (annotated)

toolkit/crashreporter/google-breakpad/android/run-checks.sh