The Tor Browser: comparison netwerk/protocol/http/SpdySession31.cpp

--1:000000000000
+:61ef6315407c
+/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* vim: set sw=2 ts=8 et tw=80 : */
+/* This Source Code Form is subject to the terms of the Mozilla Public
+* License, v. 2.0. If a copy of the MPL was not distributed with this
+* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+// HttpLog.h should generally be included first
+#include "HttpLog.h"
+// Log on level :5, instead of default :4.
+#undef LOG
+#define LOG(args) LOG5(args)
+#undef LOG_ENABLED
+#define LOG_ENABLED() LOG5_ENABLED()
+#include "mozilla/Telemetry.h"
+#include "mozilla/Preferences.h"
+#include "nsHttp.h"
+#include "nsHttpHandler.h"
+#include "nsHttpConnection.h"
+#include "nsILoadGroup.h"
+#include "prprf.h"
+#include "prnetdb.h"
+#include "SpdyPush31.h"
+#include "SpdySession31.h"
+#include "SpdyStream31.h"
+#include "SpdyZlibReporter.h"
+#include <algorithm>
+#ifdef DEBUG
+// defined by the socket transport service while active
+extern PRThread *gSocketThread;
+#endif
+namespace mozilla {
+namespace net {
+// SpdySession31 has multiple inheritance of things that implement
+// nsISupports, so this magic is taken from nsHttpPipeline that
+// implements some of the same abstract classes.
+NS_IMPL_ADDREF(SpdySession31)
+NS_IMPL_RELEASE(SpdySession31)
+NS_INTERFACE_MAP_BEGIN(SpdySession31)
+NS_INTERFACE_MAP_ENTRY_AMBIGUOUS(nsISupports, nsAHttpConnection)
+NS_INTERFACE_MAP_END
+SpdySession31::SpdySession31(nsAHttpTransaction *aHttpTransaction,
+nsISocketTransport *aSocketTransport,
+int32_t firstPriority)
+: mSocketTransport(aSocketTransport),
+mSegmentReader(nullptr),
+mSegmentWriter(nullptr),
+mNextStreamID(1),
+mConcurrentHighWater(0),
+mDownstreamState(BUFFERING_FRAME_HEADER),
+mInputFrameBufferSize(kDefaultBufferSize),
+mInputFrameBufferUsed(0),
+mInputFrameDataLast(false),
+mInputFrameDataStream(nullptr),
+mNeedsCleanup(nullptr),
+mShouldGoAway(false),
+mClosed(false),
+mCleanShutdown(false),
+mDataPending(false),
+mGoAwayID(0),
+mMaxConcurrent(kDefaultMaxConcurrent),
+mConcurrent(0),
+mServerPushedResources(0),
+mServerInitialStreamWindow(kDefaultRwin),
+mLocalSessionWindow(kDefaultRwin),
+mRemoteSessionWindow(kDefaultRwin),
+mOutputQueueSize(kDefaultQueueSize),
+mOutputQueueUsed(0),
+mOutputQueueSent(0),
+mLastReadEpoch(PR_IntervalNow()),
+mPingSentEpoch(0),
+mNextPingID(1)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+static uint64_t sSerial;
+mSerial = ++sSerial;
+LOG3(("SpdySession31::SpdySession31 %p transaction 1 = %p serial=0x%X\n",
+this, aHttpTransaction, mSerial));
+mConnection = aHttpTransaction->Connection();
+mInputFrameBuffer = new char[mInputFrameBufferSize];
+mOutputQueueBuffer = new char[mOutputQueueSize];
+zlibInit();
+mPushAllowance = gHttpHandler->SpdyPushAllowance();
+mSendingChunkSize = gHttpHandler->SpdySendingChunkSize();
+GenerateSettings();
+if (!aHttpTransaction->IsNullTransaction())
+AddStream(aHttpTransaction, firstPriority);
+mLastDataReadEpoch = mLastReadEpoch;
+mPingThreshold = gHttpHandler->SpdyPingThreshold();
+}
+PLDHashOperator
+SpdySession31::ShutdownEnumerator(nsAHttpTransaction *key,
+nsAutoPtr<SpdyStream31> &stream,
+void *closure)
+{
+SpdySession31 *self = static_cast<SpdySession31 *>(closure);
+// On a clean server hangup the server sets the GoAwayID to be the ID of
+// the last transaction it processed. If the ID of stream in the
+// local stream is greater than that it can safely be restarted because the
+// server guarantees it was not partially processed. Streams that have not
+// registered an ID haven't actually been sent yet so they can always be
+// restarted.
+if (self->mCleanShutdown &&
+(stream->StreamID() > self->mGoAwayID || !stream->HasRegisteredID()))
+self->CloseStream(stream, NS_ERROR_NET_RESET); // can be restarted
+else
+self->CloseStream(stream, NS_ERROR_ABORT);
+return PL_DHASH_NEXT;
+}
+PLDHashOperator
+SpdySession31::GoAwayEnumerator(nsAHttpTransaction *key,
+nsAutoPtr<SpdyStream31> &stream,
+void *closure)
+{
+SpdySession31 *self = static_cast<SpdySession31 *>(closure);
+// these streams were not processed by the server and can be restarted.
+// Do that after the enumerator completes to avoid the risk of
+// a restart event re-entrantly modifying this hash. Be sure not to restart
+// a pushed (even numbered) stream
+if ((stream->StreamID() > self->mGoAwayID && (stream->StreamID() & 1)) ||
+!stream->HasRegisteredID()) {
+self->mGoAwayStreamsToRestart.Push(stream);
+}
+return PL_DHASH_NEXT;
+}
+SpdySession31::~SpdySession31()
+{
+LOG3(("SpdySession31::~SpdySession31 %p mDownstreamState=%X",
+this, mDownstreamState));
+inflateEnd(&mDownstreamZlib);
+deflateEnd(&mUpstreamZlib);
+mStreamTransactionHash.Enumerate(ShutdownEnumerator, this);
+Telemetry::Accumulate(Telemetry::SPDY_PARALLEL_STREAMS, mConcurrentHighWater);
+Telemetry::Accumulate(Telemetry::SPDY_REQUEST_PER_CONN, (mNextStreamID - 1) / 2);
+Telemetry::Accumulate(Telemetry::SPDY_SERVER_INITIATED_STREAMS,
+mServerPushedResources);
+}
+void
+SpdySession31::LogIO(SpdySession31 *self, SpdyStream31 *stream, const char *label,
+const char *data, uint32_t datalen)
+{
+if (!LOG4_ENABLED())
+return;
+LOG4(("SpdySession31::LogIO %p stream=%p id=0x%X [%s]",
+self, stream, stream ? stream->StreamID() : 0, label));
+// Max line is (16 * 3) + 10(prefix) + newline + null
+char linebuf[128];
+uint32_t index;
+char *line = linebuf;
+linebuf[127] = 0;
+for (index = 0; index < datalen; ++index) {
+if (!(index % 16)) {
+if (index) {
+*line = 0;
+LOG4(("%s", linebuf));
+}
+line = linebuf;
+PR_snprintf(line, 128, "%08X: ", index);
+line += 10;
+}
+PR_snprintf(line, 128 - (line - linebuf), "%02X ",
+((unsigned char *)data)[index]);
+line += 3;
+}
+if (index) {
+*line = 0;
+LOG4(("%s", linebuf));
+}
+}
+bool
+SpdySession31::RoomForMoreConcurrent()
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+return (mConcurrent < mMaxConcurrent);
+}
+bool
+SpdySession31::RoomForMoreStreams()
+{
+if (mNextStreamID + mStreamTransactionHash.Count() * 2 > kMaxStreamID)
+return false;
+return !mShouldGoAway;
+}
+PRIntervalTime
+SpdySession31::IdleTime()
+{
+return PR_IntervalNow() - mLastDataReadEpoch;
+}
+uint32_t
+SpdySession31::ReadTimeoutTick(PRIntervalTime now)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+MOZ_ASSERT(mNextPingID & 1, "Ping Counter Not Odd");
+LOG(("SpdySession31::ReadTimeoutTick %p delta since last read %ds\n",
+this, PR_IntervalToSeconds(now - mLastReadEpoch)));
+if (!mPingThreshold)
+return UINT32_MAX;
+if ((now - mLastReadEpoch) < mPingThreshold) {
+// recent activity means ping is not an issue
+if (mPingSentEpoch)
+mPingSentEpoch = 0;
+return PR_IntervalToSeconds(mPingThreshold) -
+PR_IntervalToSeconds(now - mLastReadEpoch);
+}
+if (mPingSentEpoch) {
+LOG(("SpdySession31::ReadTimeoutTick %p handle outstanding ping\n", this));
+if ((now - mPingSentEpoch) >= gHttpHandler->SpdyPingTimeout()) {
+LOG(("SpdySession31::ReadTimeoutTick %p Ping Timer Exhaustion\n",
+this));
+mPingSentEpoch = 0;
+Close(NS_ERROR_NET_TIMEOUT);
+return UINT32_MAX;
+}
+return 1; // run the tick aggressively while ping is outstanding
+}
+LOG(("SpdySession31::ReadTimeoutTick %p generating ping 0x%X\n",
+this, mNextPingID));
+if (mNextPingID == 0xffffffff) {
+LOG(("SpdySession31::ReadTimeoutTick %p cannot form ping - ids exhausted\n",
+this));
+return UINT32_MAX;
+}
+mPingSentEpoch = PR_IntervalNow();
+if (!mPingSentEpoch)
+mPingSentEpoch = 1; // avoid the 0 sentinel value
+GeneratePing(mNextPingID);
+mNextPingID += 2;
+ResumeRecv(); // read the ping reply
+// Check for orphaned push streams. This looks expensive, but generally the
+// list is empty.
+SpdyPushedStream31 *deleteMe;
+TimeStamp timestampNow;
+do {
+deleteMe = nullptr;
+for (uint32_t index = mPushedStreams.Length();
+index > 0 ; --index) {
+SpdyPushedStream31 *pushedStream = mPushedStreams[index - 1];
+if (timestampNow.IsNull())
+timestampNow = TimeStamp::Now(); // lazy initializer
+// if spdy finished, but not connected, and its been like that for too long..
+// cleanup the stream..
+if (pushedStream->IsOrphaned(timestampNow))
+{
+LOG3(("SpdySession31 Timeout Pushed Stream %p 0x%X\n",
+this, pushedStream->StreamID()));
+deleteMe = pushedStream;
+break; // don't CleanupStream() while iterating this vector
+}
+}
+if (deleteMe)
+CleanupStream(deleteMe, NS_ERROR_ABORT, RST_CANCEL);
+} while (deleteMe);
+if (mNextPingID == 0xffffffff) {
+LOG(("SpdySession31::ReadTimeoutTick %p "
+"ping ids exhausted marking goaway\n", this));
+mShouldGoAway = true;
+}
+return 1; // run the tick aggressively while ping is outstanding
+}
+uint32_t
+SpdySession31::RegisterStreamID(SpdyStream31 *stream, uint32_t aNewID)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+MOZ_ASSERT(mNextStreamID < 0xfffffff0,
+"should have stopped admitting streams");
+MOZ_ASSERT(!(aNewID & 1),
+"0 for autoassign pull, otherwise explicit even push assignment");
+if (!aNewID) {
+// auto generate a new pull stream ID
+aNewID = mNextStreamID;
+MOZ_ASSERT(aNewID & 1, "pull ID must be odd.");
+mNextStreamID += 2;
+}
+LOG3(("SpdySession31::RegisterStreamID session=%p stream=%p id=0x%X "
+"concurrent=%d",this, stream, aNewID, mConcurrent));
+// We've used up plenty of ID's on this session. Start
+// moving to a new one before there is a crunch involving
+// server push streams or concurrent non-registered submits
+if (aNewID >= kMaxStreamID)
+mShouldGoAway = true;
+// integrity check
+if (mStreamIDHash.Get(aNewID)) {
+LOG3(("   New ID already present\n"));
+MOZ_ASSERT(false, "New ID already present in mStreamIDHash");
+mShouldGoAway = true;
+return kDeadStreamID;
+}
+mStreamIDHash.Put(aNewID, stream);
+return aNewID;
+}
+bool
+SpdySession31::AddStream(nsAHttpTransaction *aHttpTransaction,
+int32_t aPriority)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+// integrity check
+if (mStreamTransactionHash.Get(aHttpTransaction)) {
+LOG3(("   New transaction already present\n"));
+MOZ_ASSERT(false, "AddStream duplicate transaction pointer");
+return false;
+}
+aHttpTransaction->SetConnection(this);
+SpdyStream31 *stream = new SpdyStream31(aHttpTransaction, this, aPriority);
+LOG3(("SpdySession31::AddStream session=%p stream=%p NextID=0x%X (tentative)",
+this, stream, mNextStreamID));
+mStreamTransactionHash.Put(aHttpTransaction, stream);
+if (RoomForMoreConcurrent()) {
+LOG3(("SpdySession31::AddStream %p stream %p activated immediately.",
+this, stream));
+ActivateStream(stream);
+}
+else {
+LOG3(("SpdySession31::AddStream %p stream %p queued.", this, stream));
+mQueuedStreams.Push(stream);
+}
+if (!(aHttpTransaction->Caps() & NS_HTTP_ALLOW_KEEPALIVE)) {
+LOG3(("SpdySession31::AddStream %p transaction %p forces keep-alive off.\n",
+this, aHttpTransaction));
+DontReuse();
+}
+return true;
+}
+void
+SpdySession31::ActivateStream(SpdyStream31 *stream)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+MOZ_ASSERT(!stream->StreamID() || (stream->StreamID() & 1),
+"Do not activate pushed streams");
+++mConcurrent;
+if (mConcurrent > mConcurrentHighWater)
+mConcurrentHighWater = mConcurrent;
+LOG3(("SpdySession31::AddStream %p activating stream %p Currently %d "
+"streams in session, high water mark is %d",
+this, stream, mConcurrent, mConcurrentHighWater));
+mReadyForWrite.Push(stream);
+SetWriteCallbacks();
+// Kick off the SYN transmit without waiting for the poll loop
+// This won't work for stream id=1 because there is no segment reader
+// yet.
+if (mSegmentReader) {
+uint32_t countRead;
+ReadSegments(nullptr, kDefaultBufferSize, &countRead);
+}
+}
+void
+SpdySession31::ProcessPending()
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+while (RoomForMoreConcurrent()) {
+SpdyStream31 *stream = static_cast<SpdyStream31 *>(mQueuedStreams.PopFront());
+if (!stream)
+return;
+LOG3(("SpdySession31::ProcessPending %p stream %p activated from queue.",
+this, stream));
+ActivateStream(stream);
+}
+}
+nsresult
+SpdySession31::NetworkRead(nsAHttpSegmentWriter *writer, char *buf,
+uint32_t count, uint32_t *countWritten)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+if (!count) {
+*countWritten = 0;
+return NS_OK;
+}
+nsresult rv = writer->OnWriteSegment(buf, count, countWritten);
+if (NS_SUCCEEDED(rv) && *countWritten > 0)
+mLastReadEpoch = PR_IntervalNow();
+return rv;
+}
+void
+SpdySession31::SetWriteCallbacks()
+{
+if (mConnection && (GetWriteQueueSize() || mOutputQueueUsed))
+mConnection->ResumeSend();
+}
+void
+SpdySession31::RealignOutputQueue()
+{
+mOutputQueueUsed -= mOutputQueueSent;
+memmove(mOutputQueueBuffer.get(),
+mOutputQueueBuffer.get() + mOutputQueueSent,
+mOutputQueueUsed);
+mOutputQueueSent = 0;
+}
+void
+SpdySession31::FlushOutputQueue()
+{
+if (!mSegmentReader || !mOutputQueueUsed)
+return;
+nsresult rv;
+uint32_t countRead;
+uint32_t avail = mOutputQueueUsed - mOutputQueueSent;
+rv = mSegmentReader->
+OnReadSegment(mOutputQueueBuffer.get() + mOutputQueueSent, avail,
+&countRead);
+LOG3(("SpdySession31::FlushOutputQueue %p sz=%d rv=%x actual=%d",
+this, avail, rv, countRead));
+// Dont worry about errors on write, we will pick this up as a read error too
+if (NS_FAILED(rv))
+return;
+if (countRead == avail) {
+mOutputQueueUsed = 0;
+mOutputQueueSent = 0;
+return;
+}
+mOutputQueueSent += countRead;
+// If the output queue is close to filling up and we have sent out a good
+// chunk of data from the beginning then realign it.
+if ((mOutputQueueSent >= kQueueMinimumCleanup) &&
+((mOutputQueueSize - mOutputQueueUsed) < kQueueTailRoom)) {
+RealignOutputQueue();
+}
+}
+void
+SpdySession31::DontReuse()
+{
+mShouldGoAway = true;
+if (!mStreamTransactionHash.Count())
+Close(NS_OK);
+}
+uint32_t
+SpdySession31::GetWriteQueueSize()
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+return mReadyForWrite.GetSize();
+}
+void
+SpdySession31::ChangeDownstreamState(enum stateType newState)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+LOG3(("SpdyStream31::ChangeDownstreamState() %p from %X to %X",
+this, mDownstreamState, newState));
+mDownstreamState = newState;
+}
+void
+SpdySession31::ResetDownstreamState()
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+LOG3(("SpdyStream31::ResetDownstreamState() %p", this));
+ChangeDownstreamState(BUFFERING_FRAME_HEADER);
+if (mInputFrameDataLast && mInputFrameDataStream) {
+mInputFrameDataLast = false;
+if (!mInputFrameDataStream->RecvdFin()) {
+LOG3(("  SetRecvdFin id=0x%x\n", mInputFrameDataStream->StreamID()));
+mInputFrameDataStream->SetRecvdFin(true);
+DecrementConcurrent(mInputFrameDataStream);
+}
+}
+mInputFrameBufferUsed = 0;
+mInputFrameDataStream = nullptr;
+}
+template<typename T> void
+SpdySession31::EnsureBuffer(nsAutoArrayPtr<T> &buf,
+uint32_t newSize,
+uint32_t preserve,
+uint32_t &objSize)
+{
+if (objSize >= newSize)
+return;
+// Leave a little slop on the new allocation - add 2KB to
+// what we need and then round the result up to a 4KB (page)
+// boundary.
+objSize = (newSize + 2048 + 4095) & ~4095;
+static_assert(sizeof(T) == 1, "sizeof(T) must be 1");
+nsAutoArrayPtr<T> tmp(new T[objSize]);
+memcpy(tmp, buf, preserve);
+buf = tmp;
+}
+// Instantiate supported templates explicitly.
+template void
+SpdySession31::EnsureBuffer(nsAutoArrayPtr<char> &buf,
+uint32_t newSize,
+uint32_t preserve,
+uint32_t &objSize);
+template void
+SpdySession31::EnsureBuffer(nsAutoArrayPtr<uint8_t> &buf,
+uint32_t newSize,
+uint32_t preserve,
+uint32_t &objSize);
+void
+SpdySession31::DecrementConcurrent(SpdyStream31 *aStream)
+{
+uint32_t id = aStream->StreamID();
+if (id && !(id & 0x1))
+return; // pushed streams aren't counted in concurrent limit
+MOZ_ASSERT(mConcurrent);
+--mConcurrent;
+LOG3(("DecrementConcurrent %p id=0x%X concurrent=%d\n",
+this, id, mConcurrent));
+ProcessPending();
+}
+void
+SpdySession31::zlibInit()
+{
+mDownstreamZlib.zalloc = SpdyZlibReporter::Alloc;
+mDownstreamZlib.zfree = SpdyZlibReporter::Free;
+mDownstreamZlib.opaque = Z_NULL;
+inflateInit(&mDownstreamZlib);
+mUpstreamZlib.zalloc = SpdyZlibReporter::Alloc;
+mUpstreamZlib.zfree = SpdyZlibReporter::Free;
+mUpstreamZlib.opaque = Z_NULL;
+// mixing carte blanche compression with tls subjects us to traffic
+// analysis attacks
+deflateInit(&mUpstreamZlib, Z_NO_COMPRESSION);
+deflateSetDictionary(&mUpstreamZlib,
+SpdyStream31::kDictionary,
+sizeof(SpdyStream31::kDictionary));
+}
+// Need to decompress some data in order to keep the compression
+// context correct, but we really don't care what the result is
+nsresult
+SpdySession31::UncompressAndDiscard(uint32_t offset,
+uint32_t blockLen)
+{
+char *blockStart = mInputFrameBuffer + offset;
+unsigned char trash[2048];
+mDownstreamZlib.avail_in = blockLen;
+mDownstreamZlib.next_in = reinterpret_cast<unsigned char *>(blockStart);
+bool triedDictionary = false;
+do {
+mDownstreamZlib.next_out = trash;
+mDownstreamZlib.avail_out = sizeof(trash);
+int zlib_rv = inflate(&mDownstreamZlib, Z_NO_FLUSH);
+if (zlib_rv == Z_NEED_DICT) {
+if (triedDictionary) {
+LOG3(("SpdySession31::UncompressAndDiscard %p Dictionary Error\n", this));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+triedDictionary = true;
+inflateSetDictionary(&mDownstreamZlib, SpdyStream31::kDictionary,
+sizeof(SpdyStream31::kDictionary));
+}
+if (zlib_rv == Z_DATA_ERROR)
+return NS_ERROR_ILLEGAL_VALUE;
+if (zlib_rv == Z_MEM_ERROR)
+return NS_ERROR_FAILURE;
+}
+while (mDownstreamZlib.avail_in);
+return NS_OK;
+}
+void
+SpdySession31::GeneratePing(uint32_t aID)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+LOG3(("SpdySession31::GeneratePing %p 0x%X\n", this, aID));
+EnsureBuffer(mOutputQueueBuffer, mOutputQueueUsed + 12,
+mOutputQueueUsed, mOutputQueueSize);
+char *packet = mOutputQueueBuffer.get() + mOutputQueueUsed;
+mOutputQueueUsed += 12;
+packet[0] = kFlag_Control;
+packet[1] = kVersion;
+packet[2] = 0;
+packet[3] = CONTROL_TYPE_PING;
+packet[4] = 0;                                  /* flags */
+packet[5] = 0;
+packet[6] = 0;
+packet[7] = 4;                                  /* length */
+aID = PR_htonl(aID);
+memcpy(packet + 8, &aID, 4);
+LogIO(this, nullptr, "Generate Ping", packet, 12);
+FlushOutputQueue();
+}
+void
+SpdySession31::GenerateRstStream(uint32_t aStatusCode, uint32_t aID)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+LOG3(("SpdySession31::GenerateRst %p 0x%X %d\n", this, aID, aStatusCode));
+EnsureBuffer(mOutputQueueBuffer, mOutputQueueUsed + 16,
+mOutputQueueUsed, mOutputQueueSize);
+char *packet = mOutputQueueBuffer.get() + mOutputQueueUsed;
+mOutputQueueUsed += 16;
+packet[0] = kFlag_Control;
+packet[1] = kVersion;
+packet[2] = 0;
+packet[3] = CONTROL_TYPE_RST_STREAM;
+packet[4] = 0;                                  /* flags */
+packet[5] = 0;
+packet[6] = 0;
+packet[7] = 8;                                  /* length */
+aID = PR_htonl(aID);
+memcpy(packet + 8, &aID, 4);
+aStatusCode = PR_htonl(aStatusCode);
+memcpy(packet + 12, &aStatusCode, 4);
+LogIO(this, nullptr, "Generate Reset", packet, 16);
+FlushOutputQueue();
+}
+void
+SpdySession31::GenerateGoAway(uint32_t aStatusCode)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+LOG3(("SpdySession31::GenerateGoAway %p code=%X\n", this, aStatusCode));
+EnsureBuffer(mOutputQueueBuffer, mOutputQueueUsed + 16,
+mOutputQueueUsed, mOutputQueueSize);
+char *packet = mOutputQueueBuffer.get() + mOutputQueueUsed;
+mOutputQueueUsed += 16;
+memset(packet, 0, 16);
+packet[0] = kFlag_Control;
+packet[1] = kVersion;
+packet[3] = CONTROL_TYPE_GOAWAY;
+packet[7] = 8;                                  /* data length */
+// last-good-stream-id are bytes 8-11, when we accept server push this will
+// need to be set non zero
+// bytes 12-15 are the status code.
+aStatusCode = PR_htonl(aStatusCode);
+memcpy(packet + 12, &aStatusCode, 4);
+LogIO(this, nullptr, "Generate GoAway", packet, 16);
+FlushOutputQueue();
+}
+void
+SpdySession31::GenerateSettings()
+{
+uint32_t sessionWindowBump = ASpdySession::kInitialRwin - kDefaultRwin;
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+LOG3(("SpdySession31::GenerateSettings %p\n", this));
+// sized for 3 settings and a session window update to follow
+static const uint32_t maxDataLen = 4 + 3 * 8 + 16;
+EnsureBuffer(mOutputQueueBuffer, mOutputQueueUsed + 8 + maxDataLen,
+mOutputQueueUsed, mOutputQueueSize);
+char *packet = mOutputQueueBuffer.get() + mOutputQueueUsed;
+memset(packet, 0, 8 + maxDataLen);
+packet[0] = kFlag_Control;
+packet[1] = kVersion;
+packet[3] = CONTROL_TYPE_SETTINGS;
+uint8_t numberOfEntries = 0;
+// entries need to be listed in order by ID
+// 1st entry is bytes 12 to 19
+// 2nd entry is bytes 20 to 27
+// 3rd entry is bytes 28 to 35
+if (!gHttpHandler->AllowPush()) {
+// announcing that we accept 0 incoming streams is done to
+// disable server push
+packet[15 + 8 * numberOfEntries] = SETTINGS_TYPE_MAX_CONCURRENT;
+// The value portion of the setting pair is already initialized to 0
+numberOfEntries++;
+}
+nsRefPtr<nsHttpConnectionInfo> ci;
+uint32_t cwnd = 0;
+GetConnectionInfo(getter_AddRefs(ci));
+if (ci)
+cwnd = gHttpHandler->ConnMgr()->GetSpdyCWNDSetting(ci);
+if (cwnd) {
+packet[12 + 8 * numberOfEntries] = PERSISTED_VALUE;
+packet[15 + 8 * numberOfEntries] = SETTINGS_TYPE_CWND;
+LOG(("SpdySession31::GenerateSettings %p sending CWND %u\n", this, cwnd));
+cwnd = PR_htonl(cwnd);
+memcpy(packet + 16 + 8 * numberOfEntries, &cwnd, 4);
+numberOfEntries++;
+}
+// Advertise the Push RWIN and on each client SYN_STREAM pipeline
+// a window update with it in order to use larger initial windows with pulled
+// streams.
+packet[15 + 8 * numberOfEntries] = SETTINGS_TYPE_INITIAL_WINDOW;
+uint32_t rwin = PR_htonl(mPushAllowance);
+memcpy(packet + 16 + 8 * numberOfEntries, &rwin, 4);
+numberOfEntries++;
+uint32_t dataLen = 4 + 8 * numberOfEntries;
+mOutputQueueUsed += 8 + dataLen;
+packet[7] = dataLen;
+packet[11] = numberOfEntries;
+LogIO(this, nullptr, "Generate Settings", packet, 8 + dataLen);
+if (kDefaultRwin >= ASpdySession::kInitialRwin)
+goto generateSettings_complete;
+// send a window update for the session (Stream 0) for something large
+sessionWindowBump = PR_htonl(sessionWindowBump);
+mLocalSessionWindow = ASpdySession::kInitialRwin;
+packet = mOutputQueueBuffer.get() + mOutputQueueUsed;
+mOutputQueueUsed += 16;
+packet[0] = kFlag_Control;
+packet[1] = kVersion;
+packet[3] = CONTROL_TYPE_WINDOW_UPDATE;
+packet[7] = 8; // 8 data bytes after 8 byte header
+// 8 to 11 stay 0 bytes for id = 0
+memcpy(packet + 12, &sessionWindowBump, 4);
+LOG3(("Session Window increase at start of session %p %u\n",
+this, PR_ntohl(sessionWindowBump)));
+LogIO(this, nullptr, "Session Window Bump ", packet, 16);
+generateSettings_complete:
+FlushOutputQueue();
+}
+// perform a bunch of integrity checks on the stream.
+// returns true if passed, false (plus LOG and ABORT) if failed.
+bool
+SpdySession31::VerifyStream(SpdyStream31 *aStream, uint32_t aOptionalID = 0)
+{
+// This is annoying, but at least it is O(1)
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+#ifndef DEBUG
+// Only do the real verification in debug builds
+return true;
+#endif
+if (!aStream)
+return true;
+uint32_t test = 0;
+do {
+if (aStream->StreamID() == kDeadStreamID)
+break;
+nsAHttpTransaction *trans = aStream->Transaction();
+test++;
+if (!trans)
+break;
+test++;
+if (mStreamTransactionHash.Get(trans) != aStream)
+break;
+if (aStream->StreamID()) {
+SpdyStream31 *idStream = mStreamIDHash.Get(aStream->StreamID());
+test++;
+if (idStream != aStream)
+break;
+if (aOptionalID) {
+test++;
+if (idStream->StreamID() != aOptionalID)
+break;
+}
+}
+// tests passed
+return true;
+} while (0);
+LOG(("SpdySession31 %p VerifyStream Failure %p stream->id=0x%X "
+"optionalID=0x%X trans=%p test=%d\n",
+this, aStream, aStream->StreamID(),
+aOptionalID, aStream->Transaction(), test));
+MOZ_ASSERT(false, "VerifyStream");
+return false;
+}
+void
+SpdySession31::CleanupStream(SpdyStream31 *aStream, nsresult aResult,
+rstReason aResetCode)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+LOG3(("SpdySession31::CleanupStream %p %p 0x%X %X\n",
+this, aStream, aStream ? aStream->StreamID() : 0, aResult));
+if (!aStream) {
+return;
+}
+SpdyPushedStream31 *pushSource = nullptr;
+if (NS_SUCCEEDED(aResult) && aStream->DeferCleanupOnSuccess()) {
+LOG(("SpdySession31::CleanupStream 0x%X deferred\n", aStream->StreamID()));
+return;
+}
+if (!VerifyStream(aStream)) {
+LOG(("SpdySession31::CleanupStream failed to verify stream\n"));
+return;
+}
+pushSource = aStream->PushSource();
+if (!aStream->RecvdFin() && aStream->StreamID()) {
+LOG3(("Stream had not processed recv FIN, sending RST code %X\n",
+aResetCode));
+GenerateRstStream(aResetCode, aStream->StreamID());
+DecrementConcurrent(aStream);
+}
+CloseStream(aStream, aResult);
+// Remove the stream from the ID hash table and, if an even id, the pushed
+// table too.
+uint32_t id = aStream->StreamID();
+if (id > 0) {
+mStreamIDHash.Remove(id);
+if (!(id & 1))
+mPushedStreams.RemoveElement(aStream);
+}
+RemoveStreamFromQueues(aStream);
+// removing from the stream transaction hash will
+// delete the SpdyStream31 and drop the reference to
+// its transaction
+mStreamTransactionHash.Remove(aStream->Transaction());
+if (mShouldGoAway && !mStreamTransactionHash.Count())
+Close(NS_OK);
+if (pushSource) {
+pushSource->SetDeferCleanupOnSuccess(false);
+CleanupStream(pushSource, aResult, aResetCode);
+}
+}
+static void RemoveStreamFromQueue(SpdyStream31 *aStream, nsDeque &queue)
+{
+uint32_t size = queue.GetSize();
+for (uint32_t count = 0; count < size; ++count) {
+SpdyStream31 *stream = static_cast<SpdyStream31 *>(queue.PopFront());
+if (stream != aStream)
+queue.Push(stream);
+}
+}
+void
+SpdySession31::RemoveStreamFromQueues(SpdyStream31 *aStream)
+{
+RemoveStreamFromQueue(aStream, mReadyForWrite);
+RemoveStreamFromQueue(aStream, mQueuedStreams);
+RemoveStreamFromQueue(aStream, mReadyForRead);
+}
+void
+SpdySession31::CloseStream(SpdyStream31 *aStream, nsresult aResult)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+LOG3(("SpdySession31::CloseStream %p %p 0x%x %X\n",
+this, aStream, aStream->StreamID(), aResult));
+// Check if partial frame reader
+if (aStream == mInputFrameDataStream) {
+LOG3(("Stream had active partial read frame on close"));
+ChangeDownstreamState(DISCARDING_DATA_FRAME);
+mInputFrameDataStream = nullptr;
+}
+RemoveStreamFromQueues(aStream);
+// Send the stream the close() indication
+aStream->Close(aResult);
+}
+nsresult
+SpdySession31::HandleSynStream(SpdySession31 *self)
+{
+MOZ_ASSERT(self->mFrameControlType == CONTROL_TYPE_SYN_STREAM);
+if (self->mInputFrameDataSize < 18) {
+LOG3(("SpdySession31::HandleSynStream %p SYN_STREAM too short data=%d",
+self, self->mInputFrameDataSize));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+uint32_t streamID =
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[2]);
+uint32_t associatedID =
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[3]);
+uint8_t flags = reinterpret_cast<uint8_t *>(self->mInputFrameBuffer.get())[4];
+LOG3(("SpdySession31::HandleSynStream %p recv SYN_STREAM (push) "
+"for ID 0x%X associated with 0x%X.\n",
+self, streamID, associatedID));
+if (streamID & 0x01) {                   // test for odd stream ID
+LOG3(("SpdySession31::HandleSynStream %p recvd SYN_STREAM id must be even.",
+self));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+// confirm associated-to
+nsresult rv = self->SetInputFrameDataStream(associatedID);
+if (NS_FAILED(rv))
+return rv;
+SpdyStream31 *associatedStream = self->mInputFrameDataStream;
+++(self->mServerPushedResources);
+// Anytime we start using the high bit of stream ID (either client or server)
+// begin to migrate to a new session.
+if (streamID >= kMaxStreamID)
+self->mShouldGoAway = true;
+bool resetStream = true;
+SpdyPushCache *cache = nullptr;
+if (!(flags & kFlag_Data_UNI)) {
+// pushed streams require UNIDIRECTIONAL flag
+LOG3(("SpdySession31::HandleSynStream %p ID %0x%X associated ID 0x%X failed.\n",
+self, streamID, associatedID));
+self->GenerateRstStream(RST_PROTOCOL_ERROR, streamID);
+} else if (!associatedID) {
+// associated stream 0 will never find a match, but the spec requires a
+// PROTOCOL_ERROR in this specific case
+LOG3(("SpdySession31::HandleSynStream %p associated ID of 0 failed.\n", self));
+self->GenerateRstStream(RST_PROTOCOL_ERROR, streamID);
+} else if (!gHttpHandler->AllowPush()) {
+// MAX_CONCURRENT_STREAMS of 0 in settings should have disabled push,
+// but some servers are buggy about that.. or the config could have
+// been updated after the settings frame was sent. In both cases just
+// reject the pushed stream as refused
+LOG3(("SpdySession31::HandleSynStream Push Recevied when Disabled\n"));
+self->GenerateRstStream(RST_REFUSED_STREAM, streamID);
+} else if (!associatedStream) {
+LOG3(("SpdySession31::HandleSynStream %p lookup associated ID failed.\n", self));
+self->GenerateRstStream(RST_INVALID_STREAM, streamID);
+} else {
+nsILoadGroupConnectionInfo *loadGroupCI = associatedStream->LoadGroupConnectionInfo();
+if (loadGroupCI) {
+loadGroupCI->GetSpdyPushCache(&cache);
+if (!cache) {
+cache = new SpdyPushCache();
+if (!cache || NS_FAILED(loadGroupCI->SetSpdyPushCache(cache))) {
+delete cache;
+cache = nullptr;
+}
+}
+}
+if (!cache) {
+// this is unexpected, but we can handle it just be refusing the push
+LOG3(("SpdySession31::HandleSynStream Push Recevied without loadgroup cache\n"));
+self->GenerateRstStream(RST_REFUSED_STREAM, streamID);
+}
+else {
+resetStream = false;
+}
+}
+if (resetStream) {
+// Need to decompress the headers even though we aren't using them yet in
+// order to keep the compression context consistent for other syn_reply frames
+rv = self->UncompressAndDiscard(18, self->mInputFrameDataSize - 10);
+if (NS_FAILED(rv)) {
+LOG(("SpdySession31::HandleSynStream uncompress failed\n"));
+return rv;
+}
+self->ResetDownstreamState();
+return NS_OK;
+}
+// Create the buffering transaction and push stream
+nsRefPtr<SpdyPush31TransactionBuffer> transactionBuffer =
+new SpdyPush31TransactionBuffer();
+transactionBuffer->SetConnection(self);
+SpdyPushedStream31 *pushedStream =
+new SpdyPushedStream31(transactionBuffer, self,
+associatedStream, streamID);
+// ownership of the pushed stream is by the transaction hash, just as it
+// is for a client initiated stream. Errors that aren't fatal to the
+// whole session must call cleanupStream() after this point in order
+// to remove the stream from that hash.
+self->mStreamTransactionHash.Put(transactionBuffer, pushedStream);
+self->mPushedStreams.AppendElement(pushedStream);
+// The pushed stream is unidirectional so it is fully open immediately
+pushedStream->SetFullyOpen();
+// Uncompress the response headers into a stream specific buffer, leaving them
+// in spdy format for the time being.
+rv = pushedStream->Uncompress(&self->mDownstreamZlib,
+self->mInputFrameBuffer + 18,
+self->mInputFrameDataSize - 10);
+if (NS_FAILED(rv)) {
+LOG(("SpdySession31::HandleSynStream uncompress failed\n"));
+return rv;
+}
+if (self->RegisterStreamID(pushedStream, streamID) == kDeadStreamID) {
+LOG(("SpdySession31::HandleSynStream registerstreamid failed\n"));
+return NS_ERROR_FAILURE;
+}
+// Fake the request side of the pushed HTTP transaction. Sets up hash
+// key and origin
+uint32_t notUsed;
+pushedStream->ReadSegments(nullptr, 1, &notUsed);
+nsAutoCString key;
+if (!pushedStream->GetHashKey(key)) {
+LOG(("SpdySession31::HandleSynStream one of :host :scheme :path missing from push\n"));
+self->CleanupStream(pushedStream, NS_ERROR_FAILURE, RST_INVALID_STREAM);
+self->ResetDownstreamState();
+return NS_OK;
+}
+if (!associatedStream->Origin().Equals(pushedStream->Origin())) {
+LOG(("SpdySession31::HandleSynStream pushed stream mismatched origin\n"));
+self->CleanupStream(pushedStream, NS_ERROR_FAILURE, RST_INVALID_STREAM);
+self->ResetDownstreamState();
+return NS_OK;
+}
+if (!cache->RegisterPushedStreamSpdy31(key, pushedStream)) {
+LOG(("SpdySession31::HandleSynStream registerPushedStream Failed\n"));
+self->CleanupStream(pushedStream, NS_ERROR_FAILURE, RST_INVALID_STREAM);
+self->ResetDownstreamState();
+return NS_OK;
+}
+self->ResetDownstreamState();
+return NS_OK;
+}
+nsresult
+SpdySession31::SetInputFrameDataStream(uint32_t streamID)
+{
+mInputFrameDataStream = mStreamIDHash.Get(streamID);
+if (VerifyStream(mInputFrameDataStream, streamID))
+return NS_OK;
+LOG(("SpdySession31::SetInputFrameDataStream failed to verify 0x%X\n",
+streamID));
+mInputFrameDataStream = nullptr;
+return NS_ERROR_UNEXPECTED;
+}
+nsresult
+SpdySession31::HandleSynReply(SpdySession31 *self)
+{
+MOZ_ASSERT(self->mFrameControlType == CONTROL_TYPE_SYN_REPLY);
+if (self->mInputFrameDataSize < 4) {
+LOG3(("SpdySession31::HandleSynReply %p SYN REPLY too short data=%d",
+self, self->mInputFrameDataSize));
+// A framing error is a session wide error that cannot be recovered
+return NS_ERROR_ILLEGAL_VALUE;
+}
+LOG3(("SpdySession31::HandleSynReply %p lookup via streamID in syn_reply.\n",
+self));
+uint32_t streamID =
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[2]);
+nsresult rv = self->SetInputFrameDataStream(streamID);
+if (NS_FAILED(rv))
+return rv;
+if (!self->mInputFrameDataStream) {
+// Cannot find stream. We can continue the SPDY session, but we need to
+// uncompress the header block to maintain the correct compression context
+LOG3(("SpdySession31::HandleSynReply %p lookup streamID in syn_reply "
+"0x%X failed. NextStreamID = 0x%X\n",
+self, streamID, self->mNextStreamID));
+if (streamID >= self->mNextStreamID)
+self->GenerateRstStream(RST_INVALID_STREAM, streamID);
+rv = self->UncompressAndDiscard(12, self->mInputFrameDataSize - 4);
+if (NS_FAILED(rv)) {
+LOG(("SpdySession31::HandleSynReply uncompress failed\n"));
+// this is fatal to the session
+return rv;
+}
+self->ResetDownstreamState();
+return NS_OK;
+}
+// Uncompress the headers into a stream specific buffer, leaving them in
+// spdy format for the time being. Make certain to do this
+// step before any error handling that might abort the stream but not
+// the session becuase the session compression context will become
+// inconsistent if all of the compressed data is not processed.
+rv = self->mInputFrameDataStream->Uncompress(&self->mDownstreamZlib,
+self->mInputFrameBuffer + 12,
+self->mInputFrameDataSize - 4);
+if (NS_FAILED(rv)) {
+LOG(("SpdySession31::HandleSynReply uncompress failed\n"));
+return rv;
+}
+if (self->mInputFrameDataStream->GetFullyOpen()) {
+// "If an endpoint receives multiple SYN_REPLY frames for the same active
+// stream ID, it MUST issue a stream error (Section 2.4.2) with the error
+// code STREAM_IN_USE."
+//
+// "STREAM_ALREADY_CLOSED. The endpoint received a data or SYN_REPLY
+// frame for a stream which is half closed."
+//
+// If the stream is open then just RST_STREAM with STREAM_IN_USE
+// If the stream is half closed then RST_STREAM with STREAM_ALREADY_CLOSED
+// abort the session
+//
+LOG3(("SpdySession31::HandleSynReply %p dup SYN_REPLY for 0x%X"
+" recvdfin=%d", self, self->mInputFrameDataStream->StreamID(),
+self->mInputFrameDataStream->RecvdFin()));
+self->CleanupStream(self->mInputFrameDataStream, NS_ERROR_ALREADY_OPENED,
+self->mInputFrameDataStream->RecvdFin() ?
+RST_STREAM_ALREADY_CLOSED : RST_STREAM_IN_USE);
+self->ResetDownstreamState();
+return NS_OK;
+}
+self->mInputFrameDataStream->SetFullyOpen();
+self->mInputFrameDataLast = self->mInputFrameBuffer[4] & kFlag_Data_FIN;
+self->mInputFrameDataStream->UpdateTransportReadEvents(self->mInputFrameDataSize);
+self->mLastDataReadEpoch = self->mLastReadEpoch;
+if (self->mInputFrameBuffer[4] & ~kFlag_Data_FIN) {
+LOG3(("SynReply %p had undefined flag set 0x%X\n", self, streamID));
+self->CleanupStream(self->mInputFrameDataStream, NS_ERROR_ILLEGAL_VALUE,
+RST_PROTOCOL_ERROR);
+self->ResetDownstreamState();
+return NS_OK;
+}
+if (!self->mInputFrameDataLast) {
+// don't process the headers yet as there could be more coming from HEADERS
+// frames
+self->ResetDownstreamState();
+return NS_OK;
+}
+rv = self->ResponseHeadersComplete();
+if (rv == NS_ERROR_ILLEGAL_VALUE) {
+LOG3(("SpdySession31::HandleSynReply %p PROTOCOL_ERROR detected 0x%X\n",
+self, streamID));
+self->CleanupStream(self->mInputFrameDataStream, rv, RST_PROTOCOL_ERROR);
+self->ResetDownstreamState();
+rv = NS_OK;
+}
+return rv;
+}
+// ResponseHeadersComplete() returns NS_ERROR_ILLEGAL_VALUE when the stream
+// should be reset with a PROTOCOL_ERROR, NS_OK when the SYN_REPLY was
+// fine, and any other error is fatal to the session.
+nsresult
+SpdySession31::ResponseHeadersComplete()
+{
+LOG3(("SpdySession31::ResponseHeadersComplete %p for 0x%X fin=%d",
+this, mInputFrameDataStream->StreamID(), mInputFrameDataLast));
+// The spdystream needs to see flattened http headers
+// Uncompressed spdy format headers currently live in
+// SpdyStream31::mDecompressBuffer - convert that to HTTP format in
+// mFlatHTTPResponseHeaders via ConvertHeaders()
+mFlatHTTPResponseHeadersOut = 0;
+nsresult rv = mInputFrameDataStream->ConvertHeaders(mFlatHTTPResponseHeaders);
+if (NS_FAILED(rv))
+return rv;
+ChangeDownstreamState(PROCESSING_COMPLETE_HEADERS);
+return NS_OK;
+}
+nsresult
+SpdySession31::HandleRstStream(SpdySession31 *self)
+{
+MOZ_ASSERT(self->mFrameControlType == CONTROL_TYPE_RST_STREAM);
+if (self->mInputFrameDataSize != 8) {
+LOG3(("SpdySession31::HandleRstStream %p RST_STREAM wrong length data=%d",
+self, self->mInputFrameDataSize));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+uint8_t flags = reinterpret_cast<uint8_t *>(self->mInputFrameBuffer.get())[4];
+uint32_t streamID =
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[2]);
+self->mDownstreamRstReason =
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[3]);
+LOG3(("SpdySession31::HandleRstStream %p RST_STREAM Reason Code %u ID %x "
+"flags %x", self, self->mDownstreamRstReason, streamID, flags));
+if (flags != 0) {
+LOG3(("SpdySession31::HandleRstStream %p RST_STREAM with flags is illegal",
+self));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+if (self->mDownstreamRstReason == RST_INVALID_STREAM ||
+self->mDownstreamRstReason == RST_STREAM_IN_USE ||
+self->mDownstreamRstReason == RST_FLOW_CONTROL_ERROR) {
+// basically just ignore this
+LOG3(("SpdySession31::HandleRstStream %p No Reset Processing Needed.\n"));
+self->ResetDownstreamState();
+return NS_OK;
+}
+nsresult rv = self->SetInputFrameDataStream(streamID);
+if (!self->mInputFrameDataStream) {
+if (NS_FAILED(rv))
+LOG(("SpdySession31::HandleRstStream %p lookup streamID for RST Frame "
+"0x%X failed reason = %d :: VerifyStream Failed\n", self, streamID,
+self->mDownstreamRstReason));
+LOG3(("SpdySession31::HandleRstStream %p lookup streamID for RST Frame "
+"0x%X failed reason = %d", self, streamID,
+self->mDownstreamRstReason));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+self->ChangeDownstreamState(PROCESSING_CONTROL_RST_STREAM);
+return NS_OK;
+}
+PLDHashOperator
+SpdySession31::UpdateServerRwinEnumerator(nsAHttpTransaction *key,
+nsAutoPtr<SpdyStream31> &stream,
+void *closure)
+{
+int32_t delta = *(static_cast<int32_t *>(closure));
+stream->UpdateRemoteWindow(delta);
+return PL_DHASH_NEXT;
+}
+nsresult
+SpdySession31::HandleSettings(SpdySession31 *self)
+{
+MOZ_ASSERT(self->mFrameControlType == CONTROL_TYPE_SETTINGS);
+if (self->mInputFrameDataSize < 4) {
+LOG3(("SpdySession31::HandleSettings %p SETTINGS wrong length data=%d",
+self, self->mInputFrameDataSize));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+uint32_t numEntries =
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[2]);
+// Ensure frame is large enough for supplied number of entries
+// Each entry is 8 bytes, frame data is reduced by 4 to account for
+// the NumEntries value.
+if ((self->mInputFrameDataSize - 4) < (numEntries * 8)) {
+LOG3(("SpdySession31::HandleSettings %p SETTINGS wrong length data=%d",
+self, self->mInputFrameDataSize));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+LOG3(("SpdySession31::HandleSettings %p SETTINGS Control Frame with %d entries",
+self, numEntries));
+for (uint32_t index = 0; index < numEntries; ++index) {
+unsigned char *setting = reinterpret_cast<unsigned char *>
+(self->mInputFrameBuffer.get()) + 12 + index * 8;
+uint32_t flags = setting[0];
+uint32_t id = PR_ntohl(reinterpret_cast<uint32_t *>(setting)[0]) & 0xffffff;
+uint32_t value =  PR_ntohl(reinterpret_cast<uint32_t *>(setting)[1]);
+LOG3(("Settings ID %d, Flags %X, Value %d", id, flags, value));
+switch (id)
+{
+case SETTINGS_TYPE_UPLOAD_BW:
+Telemetry::Accumulate(Telemetry::SPDY_SETTINGS_UL_BW, value);
+break;
+case SETTINGS_TYPE_DOWNLOAD_BW:
+Telemetry::Accumulate(Telemetry::SPDY_SETTINGS_DL_BW, value);
+break;
+case SETTINGS_TYPE_RTT:
+Telemetry::Accumulate(Telemetry::SPDY_SETTINGS_RTT, value);
+break;
+case SETTINGS_TYPE_MAX_CONCURRENT:
+self->mMaxConcurrent = value;
+Telemetry::Accumulate(Telemetry::SPDY_SETTINGS_MAX_STREAMS, value);
+break;
+case SETTINGS_TYPE_CWND:
+if (flags & PERSIST_VALUE)
+{
+nsRefPtr<nsHttpConnectionInfo> ci;
+self->GetConnectionInfo(getter_AddRefs(ci));
+if (ci)
+gHttpHandler->ConnMgr()->ReportSpdyCWNDSetting(ci, value);
+}
+Telemetry::Accumulate(Telemetry::SPDY_SETTINGS_CWND, value);
+break;
+case SETTINGS_TYPE_DOWNLOAD_RETRANS_RATE:
+Telemetry::Accumulate(Telemetry::SPDY_SETTINGS_RETRANS, value);
+break;
+case SETTINGS_TYPE_INITIAL_WINDOW:
+Telemetry::Accumulate(Telemetry::SPDY_SETTINGS_IW, value >> 10);
+{
+int32_t delta = value - self->mServerInitialStreamWindow;
+self->mServerInitialStreamWindow = value;
+// do not use SETTINGS to adjust the session window.
+// we need to add the delta to all open streams (delta can be negative)
+self->mStreamTransactionHash.Enumerate(UpdateServerRwinEnumerator,
+&delta);
+}
+break;
+default:
+break;
+}
+}
+self->ResetDownstreamState();
+return NS_OK;
+}
+nsresult
+SpdySession31::HandleNoop(SpdySession31 *self)
+{
+MOZ_ASSERT(self->mFrameControlType == CONTROL_TYPE_NOOP);
+// Should not be receiving noop frames in spdy/3, so we'll just
+// make a log and ignore it
+LOG3(("SpdySession31::HandleNoop %p NOP.", self));
+self->ResetDownstreamState();
+return NS_OK;
+}
+nsresult
+SpdySession31::HandlePing(SpdySession31 *self)
+{
+MOZ_ASSERT(self->mFrameControlType == CONTROL_TYPE_PING);
+if (self->mInputFrameDataSize != 4) {
+LOG3(("SpdySession31::HandlePing %p PING had wrong amount of data %d",
+self, self->mInputFrameDataSize));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+uint32_t pingID =
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[2]);
+LOG3(("SpdySession31::HandlePing %p PING ID 0x%X.", self, pingID));
+if (pingID & 0x01) {
+// presumably a reply to our timeout ping
+self->mPingSentEpoch = 0;
+}
+else {
+// Servers initiate even numbered pings, go ahead and echo it back
+self->GeneratePing(pingID);
+}
+self->ResetDownstreamState();
+return NS_OK;
+}
+nsresult
+SpdySession31::HandleGoAway(SpdySession31 *self)
+{
+MOZ_ASSERT(self->mFrameControlType == CONTROL_TYPE_GOAWAY);
+if (self->mInputFrameDataSize != 8) {
+LOG3(("SpdySession31::HandleGoAway %p GOAWAY had wrong amount of data %d",
+self, self->mInputFrameDataSize));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+self->mShouldGoAway = true;
+self->mGoAwayID =
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[2]);
+self->mCleanShutdown = true;
+// Find streams greater than the last-good ID and mark them for deletion
+// in the mGoAwayStreamsToRestart queue with the GoAwayEnumerator. The
+// underlying transaction can be restarted.
+self->mStreamTransactionHash.Enumerate(GoAwayEnumerator, self);
+// Process the streams marked for deletion and restart.
+uint32_t size = self->mGoAwayStreamsToRestart.GetSize();
+for (uint32_t count = 0; count < size; ++count) {
+SpdyStream31 *stream =
+static_cast<SpdyStream31 *>(self->mGoAwayStreamsToRestart.PopFront());
+self->CloseStream(stream, NS_ERROR_NET_RESET);
+if (stream->HasRegisteredID())
+self->mStreamIDHash.Remove(stream->StreamID());
+self->mStreamTransactionHash.Remove(stream->Transaction());
+}
+// Queued streams can also be deleted from this session and restarted
+// in another one. (they were never sent on the network so they implicitly
+// are not covered by the last-good id.
+size = self->mQueuedStreams.GetSize();
+for (uint32_t count = 0; count < size; ++count) {
+SpdyStream31 *stream =
+static_cast<SpdyStream31 *>(self->mQueuedStreams.PopFront());
+self->CloseStream(stream, NS_ERROR_NET_RESET);
+self->mStreamTransactionHash.Remove(stream->Transaction());
+}
+LOG3(("SpdySession31::HandleGoAway %p GOAWAY Last-Good-ID 0x%X status 0x%X "
+"live streams=%d\n", self, self->mGoAwayID,
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[3]),
+self->mStreamTransactionHash.Count()));
+self->ResetDownstreamState();
+return NS_OK;
+}
+nsresult
+SpdySession31::HandleHeaders(SpdySession31 *self)
+{
+MOZ_ASSERT(self->mFrameControlType == CONTROL_TYPE_HEADERS);
+if (self->mInputFrameDataSize < 4) {
+LOG3(("SpdySession31::HandleHeaders %p HEADERS had wrong amount of data %d",
+self, self->mInputFrameDataSize));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+uint32_t streamID =
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[2]);
+LOG3(("SpdySession31::HandleHeaders %p HEADERS for Stream 0x%X.\n",
+self, streamID));
+nsresult rv = self->SetInputFrameDataStream(streamID);
+if (NS_FAILED(rv))
+return rv;
+if (!self->mInputFrameDataStream) {
+LOG3(("SpdySession31::HandleHeaders %p lookup streamID 0x%X failed.\n",
+self, streamID));
+if (streamID >= self->mNextStreamID)
+self->GenerateRstStream(RST_INVALID_STREAM, streamID);
+rv = self->UncompressAndDiscard(12, self->mInputFrameDataSize - 4);
+if (NS_FAILED(rv)) {
+LOG(("SpdySession31::HandleHeaders uncompress failed\n"));
+// this is fatal to the session
+return rv;
+}
+self->ResetDownstreamState();
+return NS_OK;
+}
+// Uncompress the headers into local buffers in the SpdyStream, leaving
+// them in spdy format for the time being. Make certain to do this
+// step before any error handling that might abort the stream but not
+// the session becuase the session compression context will become
+// inconsistent if all of the compressed data is not processed.
+rv = self->mInputFrameDataStream->Uncompress(&self->mDownstreamZlib,
+self->mInputFrameBuffer + 12,
+self->mInputFrameDataSize - 4);
+if (NS_FAILED(rv)) {
+LOG(("SpdySession31::HandleHeaders uncompress failed\n"));
+return rv;
+}
+self->mInputFrameDataLast = self->mInputFrameBuffer[4] & kFlag_Data_FIN;
+self->mInputFrameDataStream->
+UpdateTransportReadEvents(self->mInputFrameDataSize);
+self->mLastDataReadEpoch = self->mLastReadEpoch;
+if (self->mInputFrameBuffer[4] & ~kFlag_Data_FIN) {
+LOG3(("Headers %p had undefined flag set 0x%X\n", self, streamID));
+self->CleanupStream(self->mInputFrameDataStream, NS_ERROR_ILLEGAL_VALUE,
+RST_PROTOCOL_ERROR);
+self->ResetDownstreamState();
+return NS_OK;
+}
+if (!self->mInputFrameDataLast) {
+// don't process the headers yet as there could be more HEADERS frames
+self->ResetDownstreamState();
+return NS_OK;
+}
+rv = self->ResponseHeadersComplete();
+if (rv == NS_ERROR_ILLEGAL_VALUE) {
+LOG3(("SpdySession31::HanndleHeaders %p PROTOCOL_ERROR detected 0x%X\n",
+self, streamID));
+self->CleanupStream(self->mInputFrameDataStream, rv, RST_PROTOCOL_ERROR);
+self->ResetDownstreamState();
+rv = NS_OK;
+}
+return rv;
+}
+PLDHashOperator
+SpdySession31::RestartBlockedOnRwinEnumerator(nsAHttpTransaction *key,
+nsAutoPtr<SpdyStream31> &stream,
+void *closure)
+{
+SpdySession31 *self = static_cast<SpdySession31 *>(closure);
+MOZ_ASSERT(self->mRemoteSessionWindow > 0);
+if (!stream->BlockedOnRwin() || stream->RemoteWindow() <= 0)
+return PL_DHASH_NEXT;
+self->mReadyForWrite.Push(stream);
+self->SetWriteCallbacks();
+return PL_DHASH_NEXT;
+}
+nsresult
+SpdySession31::HandleWindowUpdate(SpdySession31 *self)
+{
+MOZ_ASSERT(self->mFrameControlType == CONTROL_TYPE_WINDOW_UPDATE);
+if (self->mInputFrameDataSize < 8) {
+LOG3(("SpdySession31::HandleWindowUpdate %p Window Update wrong length %d\n",
+self, self->mInputFrameDataSize));
+return NS_ERROR_ILLEGAL_VALUE;
+}
+uint32_t delta =
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[3]);
+delta &= 0x7fffffff;
+uint32_t streamID =
+PR_ntohl(reinterpret_cast<uint32_t *>(self->mInputFrameBuffer.get())[2]);
+streamID &= 0x7fffffff;
+LOG3(("SpdySession31::HandleWindowUpdate %p len=%d for Stream 0x%X.\n",
+self, delta, streamID));
+// ID of 0 is a session window update
+if (streamID) {
+nsresult rv = self->SetInputFrameDataStream(streamID);
+if (NS_FAILED(rv))
+return rv;
+if (!self->mInputFrameDataStream) {
+LOG3(("SpdySession31::HandleWindowUpdate %p lookup streamID 0x%X failed.\n",
+self, streamID));
+if (streamID >= self->mNextStreamID)
+self->GenerateRstStream(RST_INVALID_STREAM, streamID);
+self->ResetDownstreamState();
+return NS_OK;
+}
+self->mInputFrameDataStream->UpdateRemoteWindow(delta);
+} else {
+int64_t oldRemoteWindow = self->mRemoteSessionWindow;
+self->mRemoteSessionWindow += delta;
+if ((oldRemoteWindow <= 0) && (self->mRemoteSessionWindow > 0)) {
+LOG3(("SpdySession31::HandleWindowUpdate %p restart session window\n",
+self));
+self->mStreamTransactionHash.Enumerate(RestartBlockedOnRwinEnumerator, self);
+}
+}
+self->ResetDownstreamState();
+return NS_OK;
+}
+nsresult
+SpdySession31::HandleCredential(SpdySession31 *self)
+{
+MOZ_ASSERT(self->mFrameControlType == CONTROL_TYPE_CREDENTIAL);
+// These aren't used yet. Just ignore the frame.
+LOG3(("SpdySession31::HandleCredential %p NOP.", self));
+self->ResetDownstreamState();
+return NS_OK;
+}
+//-----------------------------------------------------------------------------
+// nsAHttpTransaction. It is expected that nsHttpConnection is the caller
+// of these methods
+//-----------------------------------------------------------------------------
+void
+SpdySession31::OnTransportStatus(nsITransport* aTransport,
+nsresult aStatus,
+uint64_t aProgress)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+switch (aStatus) {
+// These should appear only once, deliver to the first
+// transaction on the session.
+case NS_NET_STATUS_RESOLVING_HOST:
+case NS_NET_STATUS_RESOLVED_HOST:
+case NS_NET_STATUS_CONNECTING_TO:
+case NS_NET_STATUS_CONNECTED_TO:
+{
+SpdyStream31 *target = mStreamIDHash.Get(1);
+nsAHttpTransaction *transaction = target ? target->Transaction() : nullptr;
+if (transaction)
+transaction->OnTransportStatus(aTransport, aStatus, aProgress);
+break;
+}
+default:
+// The other transport events are ignored here because there is no good
+// way to map them to the right transaction in spdy. Instead, the events
+// are generated again from the spdy code and passed directly to the
+// correct transaction.
+// NS_NET_STATUS_SENDING_TO:
+// This is generated by the socket transport when (part) of
+// a transaction is written out
+//
+// There is no good way to map it to the right transaction in spdy,
+// so it is ignored here and generated separately when the SYN_STREAM
+// is sent from SpdyStream31::TransmitFrame
+// NS_NET_STATUS_WAITING_FOR:
+// Created by nsHttpConnection when the request has been totally sent.
+// There is no good way to map it to the right transaction in spdy,
+// so it is ignored here and generated separately when the same
+// condition is complete in SpdyStream31 when there is no more
+// request body left to be transmitted.
+// NS_NET_STATUS_RECEIVING_FROM
+// Generated in spdysession whenever we read a data frame or a syn_reply
+// that can be attributed to a particular stream/transaction
+break;
+}
+}
+// ReadSegments() is used to write data to the network. Generally, HTTP
+// request data is pulled from the approriate transaction and
+// converted to SPDY data. Sometimes control data like window-update are
+// generated instead.
+nsresult
+SpdySession31::ReadSegments(nsAHttpSegmentReader *reader,
+uint32_t count,
+uint32_t *countRead)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+MOZ_ASSERT(!mSegmentReader || !reader || (mSegmentReader == reader),
+"Inconsistent Write Function Callback");
+if (reader)
+mSegmentReader = reader;
+nsresult rv;
+*countRead = 0;
+LOG3(("SpdySession31::ReadSegments %p", this));
+SpdyStream31 *stream = static_cast<SpdyStream31 *>(mReadyForWrite.PopFront());
+if (!stream) {
+LOG3(("SpdySession31 %p could not identify a stream to write; suspending.",
+this));
+FlushOutputQueue();
+SetWriteCallbacks();
+return NS_BASE_STREAM_WOULD_BLOCK;
+}
+LOG3(("SpdySession31 %p will write from SpdyStream31 %p 0x%X "
+"block-input=%d block-output=%d\n", this, stream, stream->StreamID(),
+stream->RequestBlockedOnRead(), stream->BlockedOnRwin()));
+rv = stream->ReadSegments(this, count, countRead);
+// Not every permutation of stream->ReadSegents produces data (and therefore
+// tries to flush the output queue) - SENDING_FIN_STREAM can be an example
+// of that. But we might still have old data buffered that would be good
+// to flush.
+FlushOutputQueue();
+// Allow new server reads - that might be data or control information
+// (e.g. window updates or http replies) that are responses to these writes
+ResumeRecv();
+if (stream->RequestBlockedOnRead()) {
+// We are blocked waiting for input - either more http headers or
+// any request body data. When more data from the request stream
+// becomes available the httptransaction will call conn->ResumeSend().
+LOG3(("SpdySession31::ReadSegments %p dealing with block on read", this));
+// call readsegments again if there are other streams ready
+// to run in this session
+if (GetWriteQueueSize())
+rv = NS_OK;
+else
+rv = NS_BASE_STREAM_WOULD_BLOCK;
+SetWriteCallbacks();
+return rv;
+}
+if (NS_FAILED(rv)) {
+LOG3(("SpdySession31::ReadSegments %p returning FAIL code %X",
+this, rv));
+if (rv != NS_BASE_STREAM_WOULD_BLOCK)
+CleanupStream(stream, rv, RST_CANCEL);
+return rv;
+}
+if (*countRead > 0) {
+LOG3(("SpdySession31::ReadSegments %p stream=%p countread=%d",
+this, stream, *countRead));
+mReadyForWrite.Push(stream);
+SetWriteCallbacks();
+return rv;
+}
+if (stream->BlockedOnRwin()) {
+LOG3(("SpdySession31 %p will stream %p 0x%X suspended for flow control\n",
+this, stream, stream->StreamID()));
+return NS_BASE_STREAM_WOULD_BLOCK;
+}
+LOG3(("SpdySession31::ReadSegments %p stream=%p stream send complete",
+this, stream));
+// call readsegments again if there are other streams ready
+// to go in this session
+SetWriteCallbacks();
+return rv;
+}
+// WriteSegments() is used to read data off the socket. Generally this is
+// just the SPDY frame header and from there the appropriate SPDYStream
+// is identified from the Stream-ID. The http transaction associated with
+// that read then pulls in the data directly, which it will feed to
+// OnWriteSegment(). That function will gateway it into http and feed
+// it to the appropriate transaction.
+// we call writer->OnWriteSegment via NetworkRead() to get a spdy header..
+// and decide if it is data or control.. if it is control, just deal with it.
+// if it is data, identify the spdy stream
+// call stream->WriteSegments which can call this::OnWriteSegment to get the
+// data. It always gets full frames if they are part of the stream
+nsresult
+SpdySession31::WriteSegments(nsAHttpSegmentWriter *writer,
+uint32_t count,
+uint32_t *countWritten)
+{
+typedef nsresult  (*Control_FX) (SpdySession31 *self);
+static const Control_FX sControlFunctions[] =
+{
+nullptr,
+SpdySession31::HandleSynStream,
+SpdySession31::HandleSynReply,
+SpdySession31::HandleRstStream,
+SpdySession31::HandleSettings,
+SpdySession31::HandleNoop,
+SpdySession31::HandlePing,
+SpdySession31::HandleGoAway,
+SpdySession31::HandleHeaders,
+SpdySession31::HandleWindowUpdate,
+SpdySession31::HandleCredential
+};
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+nsresult rv;
+*countWritten = 0;
+if (mClosed)
+return NS_ERROR_FAILURE;
+SetWriteCallbacks();
+// If there are http transactions attached to a push stream with filled buffers
+// trigger that data pump here. This only reads from buffers (not the network)
+// so mDownstreamState doesn't matter.
+SpdyStream31 *pushConnectedStream =
+static_cast<SpdyStream31 *>(mReadyForRead.PopFront());
+if (pushConnectedStream) {
+LOG3(("SpdySession31::WriteSegments %p processing pushed stream 0x%X\n",
+this, pushConnectedStream->StreamID()));
+mSegmentWriter = writer;
+rv = pushConnectedStream->WriteSegments(this, count, countWritten);
+mSegmentWriter = nullptr;
+// The pipe in nsHttpTransaction rewrites CLOSED error codes into OK
+// so we need this check to determine the truth.
+if (NS_SUCCEEDED(rv) && !*countWritten &&
+pushConnectedStream->PushSource() &&
+pushConnectedStream->PushSource()->GetPushComplete()) {
+rv = NS_BASE_STREAM_CLOSED;
+}
+if (rv == NS_BASE_STREAM_CLOSED) {
+CleanupStream(pushConnectedStream, NS_OK, RST_CANCEL);
+rv = NS_OK;
+}
+// if we return OK to nsHttpConnection it will use mSocketInCondition
+// to determine whether to schedule more reads, incorrectly
+// assuming that nsHttpConnection::OnSocketWrite() was called.
+if (NS_SUCCEEDED(rv) || rv == NS_BASE_STREAM_WOULD_BLOCK) {
+rv = NS_BASE_STREAM_WOULD_BLOCK;
+ResumeRecv();
+}
+return rv;
+}
+// We buffer all control frames and act on them in this layer.
+// We buffer the first 8 bytes of data frames (the header) but
+// the actual data is passed through unprocessed.
+if (mDownstreamState == BUFFERING_FRAME_HEADER) {
+// The first 8 bytes of every frame is header information that
+// we are going to want to strip before passing to http. That is
+// true of both control and data packets.
+MOZ_ASSERT(mInputFrameBufferUsed < 8,
+"Frame Buffer Used Too Large for State");
+rv = NetworkRead(writer, mInputFrameBuffer + mInputFrameBufferUsed,
+8 - mInputFrameBufferUsed, countWritten);
+if (NS_FAILED(rv)) {
+LOG3(("SpdySession31 %p buffering frame header read failure %x\n",
+this, rv));
+// maybe just blocked reading from network
+if (rv == NS_BASE_STREAM_WOULD_BLOCK)
+rv = NS_OK;
+return rv;
+}
+LogIO(this, nullptr, "Reading Frame Header",
+mInputFrameBuffer + mInputFrameBufferUsed, *countWritten);
+mInputFrameBufferUsed += *countWritten;
+if (mInputFrameBufferUsed < 8)
+{
+LOG3(("SpdySession31::WriteSegments %p "
+"BUFFERING FRAME HEADER incomplete size=%d",
+this, mInputFrameBufferUsed));
+return rv;
+}
+// For both control and data frames the second 32 bit word of the header
+// is 8-flags, 24-length. (network byte order)
+mInputFrameDataSize =
+PR_ntohl(reinterpret_cast<uint32_t *>(mInputFrameBuffer.get())[1]);
+mInputFrameDataSize &= 0x00ffffff;
+mInputFrameDataRead = 0;
+if (mInputFrameBuffer[0] & kFlag_Control) {
+EnsureBuffer(mInputFrameBuffer, mInputFrameDataSize + 8, 8,
+mInputFrameBufferSize);
+ChangeDownstreamState(BUFFERING_CONTROL_FRAME);
+// The first 32 bit word of the header is
+// 1 ctrl - 15 version - 16 type
+uint16_t version =
+PR_ntohs(reinterpret_cast<uint16_t *>(mInputFrameBuffer.get())[0]);
+version &= 0x7fff;
+mFrameControlType =
+PR_ntohs(reinterpret_cast<uint16_t *>(mInputFrameBuffer.get())[1]);
+LOG3(("SpdySession31::WriteSegments %p - Control Frame Identified "
+"type %d version %d data len %d",
+this, mFrameControlType, version, mInputFrameDataSize));
+if (mFrameControlType >= CONTROL_TYPE_LAST ||
+mFrameControlType <= CONTROL_TYPE_FIRST)
+return NS_ERROR_ILLEGAL_VALUE;
+if (version != kVersion)
+return NS_ERROR_ILLEGAL_VALUE;
+}
+else {
+ChangeDownstreamState(PROCESSING_DATA_FRAME);
+Telemetry::Accumulate(Telemetry::SPDY_CHUNK_RECVD,
+mInputFrameDataSize >> 10);
+mLastDataReadEpoch = mLastReadEpoch;
+uint32_t streamID =
+PR_ntohl(reinterpret_cast<uint32_t *>(mInputFrameBuffer.get())[0]);
+rv = SetInputFrameDataStream(streamID);
+if (NS_FAILED(rv)) {
+LOG(("SpdySession31::WriteSegments %p lookup streamID 0x%X failed. "
+"probably due to verification.\n", this, streamID));
+return rv;
+}
+if (!mInputFrameDataStream) {
+LOG3(("SpdySession31::WriteSegments %p lookup streamID 0x%X failed. "
+"Next = 0x%X", this, streamID, mNextStreamID));
+if (streamID >= mNextStreamID)
+GenerateRstStream(RST_INVALID_STREAM, streamID);
+ChangeDownstreamState(DISCARDING_DATA_FRAME);
+}
+else if (mInputFrameDataStream->RecvdFin()) {
+LOG3(("SpdySession31::WriteSegments %p streamID 0x%X "
+"Data arrived for already server closed stream.\n",
+this, streamID));
+GenerateRstStream(RST_STREAM_ALREADY_CLOSED, streamID);
+ChangeDownstreamState(DISCARDING_DATA_FRAME);
+}
+else if (!mInputFrameDataStream->RecvdData()) {
+LOG3(("SpdySession31 %p First Data Frame Flushes Headers stream 0x%X\n",
+this, streamID));
+mInputFrameDataStream->SetRecvdData(true);
+rv = ResponseHeadersComplete();
+if (rv == NS_ERROR_ILLEGAL_VALUE) {
+LOG3(("SpdySession31 %p PROTOCOL_ERROR detected 0x%X\n",
+this, streamID));
+CleanupStream(mInputFrameDataStream, rv, RST_PROTOCOL_ERROR);
+ChangeDownstreamState(DISCARDING_DATA_FRAME);
+}
+else {
+mDataPending = true;
+}
+}
+mInputFrameDataLast = (mInputFrameBuffer[4] & kFlag_Data_FIN);
+LOG3(("Start Processing Data Frame. "
+"Session=%p Stream ID 0x%X Stream Ptr %p Fin=%d Len=%d",
+this, streamID, mInputFrameDataStream, mInputFrameDataLast,
+mInputFrameDataSize));
+UpdateLocalRwin(mInputFrameDataStream, mInputFrameDataSize);
+}
+}
+if (mDownstreamState == PROCESSING_CONTROL_RST_STREAM) {
+if (mDownstreamRstReason == RST_REFUSED_STREAM)
+rv = NS_ERROR_NET_RESET;            //we can retry this 100% safely
+else if (mDownstreamRstReason == RST_CANCEL ||
+mDownstreamRstReason == RST_PROTOCOL_ERROR ||
+mDownstreamRstReason == RST_INTERNAL_ERROR ||
+mDownstreamRstReason == RST_UNSUPPORTED_VERSION)
+rv = NS_ERROR_NET_INTERRUPT;
+else if (mDownstreamRstReason == RST_FRAME_TOO_LARGE)
+rv = NS_ERROR_FILE_TOO_BIG;
+else
+rv = NS_ERROR_ILLEGAL_VALUE;
+if (mDownstreamRstReason != RST_REFUSED_STREAM &&
+mDownstreamRstReason != RST_CANCEL)
+mShouldGoAway = true;
+// mInputFrameDataStream is reset by ChangeDownstreamState
+SpdyStream31 *stream = mInputFrameDataStream;
+ResetDownstreamState();
+LOG3(("SpdySession31::WriteSegments cleanup stream on recv of rst "
+"session=%p stream=%p 0x%X\n", this, stream,
+stream ? stream->StreamID() : 0));
+CleanupStream(stream, rv, RST_CANCEL);
+return NS_OK;
+}
+if (mDownstreamState == PROCESSING_DATA_FRAME ||
+mDownstreamState == PROCESSING_COMPLETE_HEADERS) {
+// The cleanup stream should only be set while stream->WriteSegments is
+// on the stack and then cleaned up in this code block afterwards.
+MOZ_ASSERT(!mNeedsCleanup, "cleanup stream set unexpectedly");
+mNeedsCleanup = nullptr;                     /* just in case */
+mSegmentWriter = writer;
+rv = mInputFrameDataStream->WriteSegments(this, count, countWritten);
+mSegmentWriter = nullptr;
+mLastDataReadEpoch = mLastReadEpoch;
+if (SoftStreamError(rv)) {
+// This will happen when the transaction figures out it is EOF, generally
+// due to a content-length match being made. Return OK from this function
+// otherwise the whole session would be torn down.
+SpdyStream31 *stream = mInputFrameDataStream;
+// if we were doing PROCESSING_COMPLETE_HEADERS need to pop the state
+// back to PROCESSING_DATA_FRAME where we came from
+mDownstreamState = PROCESSING_DATA_FRAME;
+if (mInputFrameDataRead == mInputFrameDataSize)
+ResetDownstreamState();
+LOG3(("SpdySession31::WriteSegments session=%p stream=%p 0x%X "
+"needscleanup=%p. cleanup stream based on "
+"stream->writeSegments returning code %X\n",
+this, stream, stream ? stream->StreamID() : 0,
+mNeedsCleanup, rv));
+CleanupStream(stream, NS_OK, RST_CANCEL);
+MOZ_ASSERT(!mNeedsCleanup, "double cleanup out of data frame");
+mNeedsCleanup = nullptr;                     /* just in case */
+return NS_OK;
+}
+if (mNeedsCleanup) {
+LOG3(("SpdySession31::WriteSegments session=%p stream=%p 0x%X "
+"cleanup stream based on mNeedsCleanup.\n",
+this, mNeedsCleanup, mNeedsCleanup ? mNeedsCleanup->StreamID() : 0));
+CleanupStream(mNeedsCleanup, NS_OK, RST_CANCEL);
+mNeedsCleanup = nullptr;
+}
+if (NS_FAILED(rv)) {
+LOG3(("SpdySession31 %p data frame read failure %x\n", this, rv));
+// maybe just blocked reading from network
+if (rv == NS_BASE_STREAM_WOULD_BLOCK)
+rv = NS_OK;
+}
+return rv;
+}
+if (mDownstreamState == DISCARDING_DATA_FRAME) {
+char trash[4096];
+uint32_t count = std::min(4096U, mInputFrameDataSize - mInputFrameDataRead);
+if (!count) {
+ResetDownstreamState();
+ResumeRecv();
+return NS_BASE_STREAM_WOULD_BLOCK;
+}
+rv = NetworkRead(writer, trash, count, countWritten);
+if (NS_FAILED(rv)) {
+LOG3(("SpdySession31 %p discard frame read failure %x\n", this, rv));
+// maybe just blocked reading from network
+if (rv == NS_BASE_STREAM_WOULD_BLOCK)
+rv = NS_OK;
+return rv;
+}
+LogIO(this, nullptr, "Discarding Frame", trash, *countWritten);
+mInputFrameDataRead += *countWritten;
+if (mInputFrameDataRead == mInputFrameDataSize)
+ResetDownstreamState();
+return rv;
+}
+MOZ_ASSERT(mDownstreamState == BUFFERING_CONTROL_FRAME);
+if (mDownstreamState != BUFFERING_CONTROL_FRAME) {
+// this cannot happen
+return NS_ERROR_UNEXPECTED;
+}
+MOZ_ASSERT(mInputFrameBufferUsed == 8,
+"Frame Buffer Header Not Present");
+rv = NetworkRead(writer, mInputFrameBuffer + 8 + mInputFrameDataRead,
+mInputFrameDataSize - mInputFrameDataRead, countWritten);
+if (NS_FAILED(rv)) {
+LOG3(("SpdySession31 %p buffering control frame read failure %x\n",
+this, rv));
+// maybe just blocked reading from network
+if (rv == NS_BASE_STREAM_WOULD_BLOCK)
+rv = NS_OK;
+return rv;
+}
+LogIO(this, nullptr, "Reading Control Frame",
+mInputFrameBuffer + 8 + mInputFrameDataRead, *countWritten);
+mInputFrameDataRead += *countWritten;
+if (mInputFrameDataRead != mInputFrameDataSize)
+return NS_OK;
+// This check is actually redundant, the control type was previously
+// checked to make sure it was in range, but we will check it again
+// at time of use to make sure a regression doesn't creep in.
+if (mFrameControlType >= CONTROL_TYPE_LAST ||
+mFrameControlType <= CONTROL_TYPE_FIRST)
+{
+MOZ_ASSERT(false, "control type out of range");
+return NS_ERROR_ILLEGAL_VALUE;
+}
+rv = sControlFunctions[mFrameControlType](this);
+MOZ_ASSERT(NS_FAILED(rv) ||
+mDownstreamState != BUFFERING_CONTROL_FRAME,
+"Control Handler returned OK but did not change state");
+if (mShouldGoAway && !mStreamTransactionHash.Count())
+Close(NS_OK);
+return rv;
+}
+void
+SpdySession31::UpdateLocalStreamWindow(SpdyStream31 *stream,
+uint32_t bytes)
+{
+if (!stream) // this is ok - it means there was a data frame for a rst stream
+return;
+stream->DecrementLocalWindow(bytes);
+// If this data packet was not for a valid or live stream then there
+// is no reason to mess with the flow control
+if (stream->RecvdFin())
+return;
+// Don't necessarily ack every data packet. Only do it
+// after a significant amount of data.
+uint64_t unacked = stream->LocalUnAcked();
+int64_t  localWindow = stream->LocalWindow();
+LOG3(("SpdySession31::UpdateLocalStreamWindow this=%p id=0x%X newbytes=%u "
+"unacked=%llu localWindow=%lld\n",
+this, stream->StreamID(), bytes, unacked, localWindow));
+if (!unacked)
+return;
+if ((unacked < kMinimumToAck) && (localWindow > kEmergencyWindowThreshold))
+return;
+if (!stream->HasSink()) {
+LOG3(("SpdySession31::UpdateLocalStreamWindow %p 0x%X Pushed Stream Has No Sink\n",
+this, stream->StreamID()));
+return;
+}
+// Generate window updates directly out of spdysession instead of the stream
+// in order to avoid queue delays in getting the 'ACK' out.
+uint32_t toack = (unacked <= 0x7fffffffU) ? unacked : 0x7fffffffU;
+LOG3(("SpdySession31::UpdateLocalStreamWindow Ack this=%p id=0x%X acksize=%d\n",
+this, stream->StreamID(), toack));
+stream->IncrementLocalWindow(toack);
+// room for this packet needs to be ensured before calling this function
+static const uint32_t dataLen = 8;
+char *packet = mOutputQueueBuffer.get() + mOutputQueueUsed;
+mOutputQueueUsed += 8 + dataLen;
+MOZ_ASSERT(mOutputQueueUsed <= mOutputQueueSize);
+memset(packet, 0, 8 + dataLen);
+packet[0] = kFlag_Control;
+packet[1] = kVersion;
+packet[3] = CONTROL_TYPE_WINDOW_UPDATE;
+packet[7] = dataLen;
+uint32_t id = PR_htonl(stream->StreamID());
+memcpy(packet + 8, &id, 4);
+toack = PR_htonl(toack);
+memcpy(packet + 12, &toack, 4);
+LogIO(this, stream, "Stream Window Update", packet, 8 + dataLen);
+// dont flush here, this write can commonly be coalesced with a
+// session window update to immediately follow.
+}
+void
+SpdySession31::UpdateLocalSessionWindow(uint32_t bytes)
+{
+if (!bytes)
+return;
+mLocalSessionWindow -= bytes;
+LOG3(("SpdySession31::UpdateLocalSessionWindow this=%p newbytes=%u "
+"localWindow=%lld\n", this, bytes, mLocalSessionWindow));
+// Don't necessarily ack every data packet. Only do it
+// after a significant amount of data.
+if ((mLocalSessionWindow > (ASpdySession::kInitialRwin - kMinimumToAck)) &&
+(mLocalSessionWindow > kEmergencyWindowThreshold))
+return;
+// Only send max 31 bits of window updates at a time.
+uint64_t toack64 = ASpdySession::kInitialRwin - mLocalSessionWindow;
+uint32_t toack = (toack64 <= 0x7fffffffU) ? toack64 : 0x7fffffffU;
+LOG3(("SpdySession31::UpdateLocalSessionWindow Ack this=%p acksize=%u\n",
+this, toack));
+mLocalSessionWindow += toack;
+// room for this packet needs to be ensured before calling this function
+static const uint32_t dataLen = 8;
+char *packet = mOutputQueueBuffer.get() + mOutputQueueUsed;
+mOutputQueueUsed += 8 + dataLen;
+MOZ_ASSERT(mOutputQueueUsed <= mOutputQueueSize);
+memset(packet, 0, 8 + dataLen);
+packet[0] = kFlag_Control;
+packet[1] = kVersion;
+packet[3] = CONTROL_TYPE_WINDOW_UPDATE;
+packet[7] = dataLen;
+// packet 8-11 is ID and left at 0 for session ID
+toack = PR_htonl(toack);
+memcpy(packet + 12, &toack, 4);
+LogIO(this, nullptr, "Session Window Update", packet, 8 + dataLen);
+// dont flush here, this write can commonly be coalesced with others
+}
+void
+SpdySession31::UpdateLocalRwin(SpdyStream31 *stream,
+uint32_t bytes)
+{
+// make sure there is room for 2 window updates even though
+// we may not generate any.
+EnsureBuffer(mOutputQueueBuffer, mOutputQueueUsed + (16 *2),
+mOutputQueueUsed, mOutputQueueSize);
+UpdateLocalStreamWindow(stream, bytes);
+UpdateLocalSessionWindow(bytes);
+FlushOutputQueue();
+}
+void
+SpdySession31::Close(nsresult aReason)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+if (mClosed)
+return;
+LOG3(("SpdySession31::Close %p %X", this, aReason));
+mClosed = true;
+mStreamTransactionHash.Enumerate(ShutdownEnumerator, this);
+mStreamIDHash.Clear();
+mStreamTransactionHash.Clear();
+uint32_t goAwayReason;
+if (NS_SUCCEEDED(aReason)) {
+goAwayReason = OK;
+} else if (aReason == NS_ERROR_ILLEGAL_VALUE) {
+goAwayReason = PROTOCOL_ERROR;
+} else {
+goAwayReason = INTERNAL_ERROR;
+}
+GenerateGoAway(goAwayReason);
+mConnection = nullptr;
+mSegmentReader = nullptr;
+mSegmentWriter = nullptr;
+}
+void
+SpdySession31::CloseTransaction(nsAHttpTransaction *aTransaction,
+nsresult aResult)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+LOG3(("SpdySession31::CloseTransaction %p %p %x", this, aTransaction, aResult));
+// Generally this arrives as a cancel event from the connection manager.
+// need to find the stream and call CleanupStream() on it.
+SpdyStream31 *stream = mStreamTransactionHash.Get(aTransaction);
+if (!stream) {
+LOG3(("SpdySession31::CloseTransaction %p %p %x - not found.",
+this, aTransaction, aResult));
+return;
+}
+LOG3(("SpdySession31::CloseTranscation probably a cancel. "
+"this=%p, trans=%p, result=%x, streamID=0x%X stream=%p",
+this, aTransaction, aResult, stream->StreamID(), stream));
+CleanupStream(stream, aResult, RST_CANCEL);
+ResumeRecv();
+}
+//-----------------------------------------------------------------------------
+// nsAHttpSegmentReader
+//-----------------------------------------------------------------------------
+nsresult
+SpdySession31::OnReadSegment(const char *buf,
+uint32_t count,
+uint32_t *countRead)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+nsresult rv;
+// If we can release old queued data then we can try and write the new
+// data directly to the network without using the output queue at all
+if (mOutputQueueUsed)
+FlushOutputQueue();
+if (!mOutputQueueUsed && mSegmentReader) {
+// try and write directly without output queue
+rv = mSegmentReader->OnReadSegment(buf, count, countRead);
+if (rv == NS_BASE_STREAM_WOULD_BLOCK)
+*countRead = 0;
+else if (NS_FAILED(rv))
+return rv;
+if (*countRead < count) {
+uint32_t required = count - *countRead;
+// assuming a commitment() happened, this ensurebuffer is a nop
+// but just in case the queuesize is too small for the required data
+// call ensurebuffer().
+EnsureBuffer(mOutputQueueBuffer, required, 0, mOutputQueueSize);
+memcpy(mOutputQueueBuffer.get(), buf + *countRead, required);
+mOutputQueueUsed = required;
+}
+*countRead = count;
+return NS_OK;
+}
+// At this point we are going to buffer the new data in the output
+// queue if it fits. By coalescing multiple small submissions into one larger
+// buffer we can get larger writes out to the network later on.
+// This routine should not be allowed to fill up the output queue
+// all on its own - at least kQueueReserved bytes are always left
+// for other routines to use - but this is an all-or-nothing function,
+// so if it will not all fit just return WOULD_BLOCK
+if ((mOutputQueueUsed + count) > (mOutputQueueSize - kQueueReserved))
+return NS_BASE_STREAM_WOULD_BLOCK;
+memcpy(mOutputQueueBuffer.get() + mOutputQueueUsed, buf, count);
+mOutputQueueUsed += count;
+*countRead = count;
+FlushOutputQueue();
+return NS_OK;
+}
+nsresult
+SpdySession31::CommitToSegmentSize(uint32_t count, bool forceCommitment)
+{
+if (mOutputQueueUsed)
+FlushOutputQueue();
+// would there be enough room to buffer this if needed?
+if ((mOutputQueueUsed + count) <= (mOutputQueueSize - kQueueReserved))
+return NS_OK;
+// if we are using part of our buffers already, try again later unless
+// forceCommitment is set.
+if (mOutputQueueUsed && !forceCommitment)
+return NS_BASE_STREAM_WOULD_BLOCK;
+if (mOutputQueueUsed) {
+// normally we avoid the memmove of RealignOutputQueue, but we'll try
+// it if forceCommitment is set before growing the buffer.
+RealignOutputQueue();
+// is there enough room now?
+if ((mOutputQueueUsed + count) <= (mOutputQueueSize - kQueueReserved))
+return NS_OK;
+}
+// resize the buffers as needed
+EnsureBuffer(mOutputQueueBuffer, mOutputQueueUsed + count + kQueueReserved,
+mOutputQueueUsed, mOutputQueueSize);
+MOZ_ASSERT((mOutputQueueUsed + count) <= (mOutputQueueSize - kQueueReserved),
+"buffer not as large as expected");
+return NS_OK;
+}
+//-----------------------------------------------------------------------------
+// nsAHttpSegmentWriter
+//-----------------------------------------------------------------------------
+nsresult
+SpdySession31::OnWriteSegment(char *buf,
+uint32_t count,
+uint32_t *countWritten)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+nsresult rv;
+if (!mSegmentWriter) {
+// the only way this could happen would be if Close() were called on the
+// stack with WriteSegments()
+return NS_ERROR_FAILURE;
+}
+if (mDownstreamState == PROCESSING_DATA_FRAME) {
+if (mInputFrameDataLast &&
+mInputFrameDataRead == mInputFrameDataSize) {
+*countWritten = 0;
+SetNeedsCleanup();
+return NS_BASE_STREAM_CLOSED;
+}
+count = std::min(count, mInputFrameDataSize - mInputFrameDataRead);
+rv = NetworkRead(mSegmentWriter, buf, count, countWritten);
+if (NS_FAILED(rv))
+return rv;
+LogIO(this, mInputFrameDataStream, "Reading Data Frame",
+buf, *countWritten);
+mInputFrameDataRead += *countWritten;
+mInputFrameDataStream->UpdateTransportReadEvents(*countWritten);
+if ((mInputFrameDataRead == mInputFrameDataSize) && !mInputFrameDataLast)
+ResetDownstreamState();
+return rv;
+}
+if (mDownstreamState == PROCESSING_COMPLETE_HEADERS) {
+if (mFlatHTTPResponseHeaders.Length() == mFlatHTTPResponseHeadersOut &&
+mInputFrameDataLast) {
+*countWritten = 0;
+SetNeedsCleanup();
+return NS_BASE_STREAM_CLOSED;
+}
+count = std::min(count,
+mFlatHTTPResponseHeaders.Length() -
+mFlatHTTPResponseHeadersOut);
+memcpy(buf,
+mFlatHTTPResponseHeaders.get() + mFlatHTTPResponseHeadersOut,
+count);
+mFlatHTTPResponseHeadersOut += count;
+*countWritten = count;
+if (mFlatHTTPResponseHeaders.Length() == mFlatHTTPResponseHeadersOut) {
+if (mDataPending) {
+// Now ready to process data frames - pop PROCESING_DATA_FRAME back onto
+// the stack because receipt of that first data frame triggered the
+// response header processing
+mDataPending = false;
+ChangeDownstreamState(PROCESSING_DATA_FRAME);
+}
+else if (!mInputFrameDataLast) {
+// If more frames are expected in this stream, then reset the state so they can be
+// handled. Otherwise (e.g. a 0 length response with the fin on the SYN_REPLY)
+// stay in PROCESSING_COMPLETE_HEADERS state so the SetNeedsCleanup() code above can
+// cleanup the stream.
+ResetDownstreamState();
+}
+}
+return NS_OK;
+}
+return NS_ERROR_UNEXPECTED;
+}
+void
+SpdySession31::SetNeedsCleanup()
+{
+LOG3(("SpdySession31::SetNeedsCleanup %p - recorded downstream fin of "
+"stream %p 0x%X", this, mInputFrameDataStream,
+mInputFrameDataStream->StreamID()));
+// This will result in Close() being called
+MOZ_ASSERT(!mNeedsCleanup, "mNeedsCleanup unexpectedly set");
+mNeedsCleanup = mInputFrameDataStream;
+ResetDownstreamState();
+}
+void
+SpdySession31::ConnectPushedStream(SpdyStream31 *stream)
+{
+mReadyForRead.Push(stream);
+ForceRecv();
+}
+nsresult
+SpdySession31::BufferOutput(const char *buf,
+uint32_t count,
+uint32_t *countRead)
+{
+nsAHttpSegmentReader *old = mSegmentReader;
+mSegmentReader = nullptr;
+nsresult rv = OnReadSegment(buf, count, countRead);
+mSegmentReader = old;
+return rv;
+}
+//-----------------------------------------------------------------------------
+// Modified methods of nsAHttpConnection
+//-----------------------------------------------------------------------------
+void
+SpdySession31::TransactionHasDataToWrite(nsAHttpTransaction *caller)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+LOG3(("SpdySession31::TransactionHasDataToWrite %p trans=%p", this, caller));
+// a trapped signal from the http transaction to the connection that
+// it is no longer blocked on read.
+SpdyStream31 *stream = mStreamTransactionHash.Get(caller);
+if (!stream || !VerifyStream(stream)) {
+LOG3(("SpdySession31::TransactionHasDataToWrite %p caller %p not found",
+this, caller));
+return;
+}
+LOG3(("SpdySession31::TransactionHasDataToWrite %p ID is 0x%X\n",
+this, stream->StreamID()));
+mReadyForWrite.Push(stream);
+}
+void
+SpdySession31::TransactionHasDataToWrite(SpdyStream31 *stream)
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+LOG3(("SpdySession31::TransactionHasDataToWrite %p stream=%p ID=%x",
+this, stream, stream->StreamID()));
+mReadyForWrite.Push(stream);
+SetWriteCallbacks();
+}
+bool
+SpdySession31::IsPersistent()
+{
+return true;
+}
+nsresult
+SpdySession31::TakeTransport(nsISocketTransport **,
+nsIAsyncInputStream **,
+nsIAsyncOutputStream **)
+{
+MOZ_ASSERT(false, "TakeTransport of SpdySession31");
+return NS_ERROR_UNEXPECTED;
+}
+nsHttpConnection *
+SpdySession31::TakeHttpConnection()
+{
+MOZ_ASSERT(false, "TakeHttpConnection of SpdySession31");
+return nullptr;
+}
+uint32_t
+SpdySession31::CancelPipeline(nsresult reason)
+{
+// we don't pipeline inside spdy, so this isn't an issue
+return 0;
+}
+nsAHttpTransaction::Classifier
+SpdySession31::Classification()
+{
+if (!mConnection)
+return nsAHttpTransaction::CLASS_GENERAL;
+return mConnection->Classification();
+}
+//-----------------------------------------------------------------------------
+// unused methods of nsAHttpTransaction
+// We can be sure of this because SpdySession31 is only constructed in
+// nsHttpConnection and is never passed out of that object
+//-----------------------------------------------------------------------------
+void
+SpdySession31::SetConnection(nsAHttpConnection *)
+{
+// This is unexpected
+MOZ_ASSERT(false, "SpdySession31::SetConnection()");
+}
+void
+SpdySession31::GetSecurityCallbacks(nsIInterfaceRequestor **)
+{
+// This is unexpected
+MOZ_ASSERT(false, "SpdySession31::GetSecurityCallbacks()");
+}
+void
+SpdySession31::SetProxyConnectFailed()
+{
+MOZ_ASSERT(false, "SpdySession31::SetProxyConnectFailed()");
+}
+bool
+SpdySession31::IsDone()
+{
+return !mStreamTransactionHash.Count();
+}
+nsresult
+SpdySession31::Status()
+{
+MOZ_ASSERT(false, "SpdySession31::Status()");
+return NS_ERROR_UNEXPECTED;
+}
+uint32_t
+SpdySession31::Caps()
+{
+MOZ_ASSERT(false, "SpdySession31::Caps()");
+return 0;
+}
+void
+SpdySession31::SetDNSWasRefreshed()
+{
+}
+uint64_t
+SpdySession31::Available()
+{
+MOZ_ASSERT(false, "SpdySession31::Available()");
+return 0;
+}
+nsHttpRequestHead *
+SpdySession31::RequestHead()
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+MOZ_ASSERT(false,
+"SpdySession31::RequestHead() "
+"should not be called after SPDY is setup");
+return nullptr;
+}
+uint32_t
+SpdySession31::Http1xTransactionCount()
+{
+return 0;
+}
+// used as an enumerator by TakeSubTransactions()
+static PLDHashOperator
+TakeStream(nsAHttpTransaction *key,
+nsAutoPtr<SpdyStream31> &stream,
+void *closure)
+{
+nsTArray<nsRefPtr<nsAHttpTransaction> > *list =
+static_cast<nsTArray<nsRefPtr<nsAHttpTransaction> > *>(closure);
+list->AppendElement(key);
+// removing the stream from the hash will delete the stream
+// and drop the transaction reference the hash held
+return PL_DHASH_REMOVE;
+}
+nsresult
+SpdySession31::TakeSubTransactions(
+nsTArray<nsRefPtr<nsAHttpTransaction> > &outTransactions)
+{
+// Generally this cannot be done with spdy as transactions are
+// started right away.
+LOG3(("SpdySession31::TakeSubTransactions %p\n", this));
+if (mConcurrentHighWater > 0)
+return NS_ERROR_ALREADY_OPENED;
+LOG3(("   taking %d\n", mStreamTransactionHash.Count()));
+mStreamTransactionHash.Enumerate(TakeStream, &outTransactions);
+return NS_OK;
+}
+nsresult
+SpdySession31::AddTransaction(nsAHttpTransaction *)
+{
+// This API is meant for pipelining, SpdySession31's should be
+// extended with AddStream()
+MOZ_ASSERT(false,
+"SpdySession31::AddTransaction() should not be called");
+return NS_ERROR_NOT_IMPLEMENTED;
+}
+uint32_t
+SpdySession31::PipelineDepth()
+{
+return IsDone() ? 0 : 1;
+}
+nsresult
+SpdySession31::SetPipelinePosition(int32_t position)
+{
+// This API is meant for pipelining, SpdySession31's should be
+// extended with AddStream()
+MOZ_ASSERT(false,
+"SpdySession31::SetPipelinePosition() should not be called");
+return NS_ERROR_NOT_IMPLEMENTED;
+}
+int32_t
+SpdySession31::PipelinePosition()
+{
+return 0;
+}
+//-----------------------------------------------------------------------------
+// Pass through methods of nsAHttpConnection
+//-----------------------------------------------------------------------------
+nsAHttpConnection *
+SpdySession31::Connection()
+{
+MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
+return mConnection;
+}
+nsresult
+SpdySession31::OnHeadersAvailable(nsAHttpTransaction *transaction,
+nsHttpRequestHead *requestHead,
+nsHttpResponseHead *responseHead,
+bool *reset)
+{
+return mConnection->OnHeadersAvailable(transaction,
+requestHead,
+responseHead,
+reset);
+}
+bool
+SpdySession31::IsReused()
+{
+return mConnection->IsReused();
+}
+nsresult
+SpdySession31::PushBack(const char *buf, uint32_t len)
+{
+return mConnection->PushBack(buf, len);
+}
+} // namespace mozilla::net
+} // namespace mozilla

The Tor Browser / file comparison

comparison: netwerk/protocol/http/SpdySession31.cpp

netwerk/protocol/http/SpdySession31.cpp