The Tor Browser / file revision

 # Generated from ltmain.m4sh.

 # ltmain.sh (GNU libtool) 2.2.6b

 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996

 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.

 # This is free software; see the source for copying conditions.  There is NO

 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

 # GNU Libtool is free software; you can redistribute it and/or modify

 # it under the terms of the GNU General Public License as published by

 # the Free Software Foundation; either version 2 of the License, or

 # (at your option) any later version.

 #

 # As a special exception to the GNU General Public License,

 # if you distribute this file as part of a program or library that

 # is built using GNU Libtool, you may include this file under the

 # same distribution terms that you use for the rest of that program.

 #

 # GNU Libtool is distributed in the hope that it will be useful, but

 # WITHOUT ANY WARRANTY; without even the implied warranty of

 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

 # General Public License for more details.

 #

 # You should have received a copy of the GNU General Public License

 # along with GNU Libtool; see the file COPYING.  If not, a copy

 # can be downloaded from http://www.gnu.org/licenses/gpl.html,

 # or obtained by writing to the Free Software Foundation, Inc.,

 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

 # Usage: $progname [OPTION]... [MODE-ARG]...

 #

 # Provide generalized library-building support services.

 #

 #     --config             show all configuration variables

 #     --debug              enable verbose shell tracing

 # -n, --dry-run            display commands without modifying any files

 #     --features           display basic configuration information and exit

 #     --mode=MODE          use operation mode MODE

 #     --preserve-dup-deps  don't remove duplicate dependency libraries

 #     --quiet, --silent    don't print informational messages

 #     --tag=TAG            use configuration variables from tag TAG

 # -v, --verbose            print informational messages (default)

 #     --version            print version information

 # -h, --help               print short or long help message

 #

 # MODE must be one of the following:

 #

 #       clean              remove files from the build directory

 #       compile            compile a source file into a libtool object

 #       execute            automatically set library path, then run a program

 #       finish             complete the installation of libtool libraries

 #       install            install libraries or executables

 #       link               create a library or an executable

 #       uninstall          remove libraries from an installed directory

 #

 # MODE-ARGS vary depending on the MODE.

 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.

 #

 # When reporting a bug, please describe a test case to reproduce it and

 # include the following information:

 #

 #       host-triplet:	$host

 #       shell:		$SHELL

 #       compiler:		$LTCC

 #       compiler flags:		$LTCFLAGS

 #       linker:		$LD (gnu? $with_gnu_ld)

 #       $progname:		(GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu1

 #       automake:		$automake_version

 #       autoconf:		$autoconf_version

 #

 # Report bugs to <bug-libtool@gnu.org>.

 PROGRAM=ltmain.sh

 PACKAGE=libtool

 VERSION="2.2.6b Debian-2.2.6b-2ubuntu1"

 TIMESTAMP=""

 package_revision=1.3017

 # Be Bourne compatible

 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then

   emulate sh

   NULLCMD=:

   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which

   # is contrary to our usage.  Disable this feature.

   alias -g '${1+"$@"}'='"$@"'

   setopt NO_GLOB_SUBST

 else

   case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac

 fi

 BIN_SH=xpg4; export BIN_SH # for Tru64

 DUALCASE=1; export DUALCASE # for MKS sh

 # NLS nuisances: We save the old values to restore during execute mode.

 # Only set LANG and LC_ALL to C if already set.

 # These must not be set unconditionally because not all systems understand

 # e.g. LANG=C (notably SCO).

 lt_user_locale=

 lt_safe_locale=

 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES

 do

   eval "if test \"\${$lt_var+set}\" = set; then

           save_$lt_var=\$$lt_var

           $lt_var=C

 	  export $lt_var

 	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"

 	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"

 	fi"

 done

 $lt_unset CDPATH

 : ${CP="cp -f"}

 : ${ECHO="echo"}

 : ${EGREP="/bin/grep -E"}

 : ${FGREP="/bin/grep -F"}

 : ${GREP="/bin/grep"}

 : ${LN_S="ln -s"}

 : ${MAKE="make"}

 : ${MKDIR="mkdir"}

 : ${MV="mv -f"}

 : ${RM="rm -f"}

 : ${SED="/bin/sed"}

 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}

 : ${Xsed="$SED -e 1s/^X//"}

 # Global variables:

 EXIT_SUCCESS=0

 EXIT_FAILURE=1

 EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.

 EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.

 exit_status=$EXIT_SUCCESS

 # Make sure IFS has a sensible default

 lt_nl='

 '

 IFS=" 	$lt_nl"

 dirname="s,/[^/]*$,,"

 basename="s,^.*/,,"

 # func_dirname_and_basename file append nondir_replacement

 # perform func_basename and func_dirname in a single function

 # call:

 #   dirname:  Compute the dirname of FILE.  If nonempty,

 #             add APPEND to the result, otherwise set result

 #             to NONDIR_REPLACEMENT.

 #             value returned in "$func_dirname_result"

 #   basename: Compute filename of FILE.

 #             value retuned in "$func_basename_result"

 # Implementation must be kept synchronized with func_dirname

 # and func_basename. For efficiency, we do not delegate to

 # those functions but instead duplicate the functionality here.

 func_dirname_and_basename ()

 {

   # Extract subdirectory from the argument.

   func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`

   if test "X$func_dirname_result" = "X${1}"; then

     func_dirname_result="${3}"

   else

     func_dirname_result="$func_dirname_result${2}"

   fi

   func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`

 }

 # Generated shell functions inserted here.

 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh

 # is ksh but when the shell is invoked as "sh" and the current value of

 # the _XPG environment variable is not equal to 1 (one), the special

 # positional parameter $0, within a function call, is the name of the

 # function.

 progpath="$0"

 # The name of this program:

 # In the unlikely event $progname began with a '-', it would play havoc with

 # func_echo (imagine progname=-n), so we prepend ./ in that case:

 func_dirname_and_basename "$progpath"

 progname=$func_basename_result

 case $progname in

   -*) progname=./$progname ;;

 esac

 # Make sure we have an absolute path for reexecution:

 case $progpath in

   [\\/]*|[A-Za-z]:\\*) ;;

   *[\\/]*)

      progdir=$func_dirname_result

      progdir=`cd "$progdir" && pwd`

      progpath="$progdir/$progname"

      ;;

   *)

      save_IFS="$IFS"

      IFS=:

      for progdir in $PATH; do

        IFS="$save_IFS"

        test -x "$progdir/$progname" && break

      done

      IFS="$save_IFS"

      test -n "$progdir" || progdir=`pwd`

      progpath="$progdir/$progname"

      ;;

 esac

 # Sed substitution that helps us do robust quoting.  It backslashifies

 # metacharacters that are still active within double-quoted strings.

 Xsed="${SED}"' -e 1s/^X//'

 sed_quote_subst='s/\([`"$\\]\)/\\\1/g'

 # Same as above, but do not quote variable references.

 double_quote_subst='s/\(["`\\]\)/\\\1/g'

 # Re-`\' parameter expansions in output of double_quote_subst that were

 # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'

 # in input to double_quote_subst, that '$' was protected from expansion.

 # Since each input `\' is now two `\'s, look for any number of runs of

 # four `\'s followed by two `\'s and then a '$'.  `\' that '$'.

 bs='\\'

 bs2='\\\\'

 bs4='\\\\\\\\'

 dollar='\$'

 sed_double_backslash="\

   s/$bs4/&\\

 /g

   s/^$bs2$dollar/$bs&/

   s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g

   s/\n//g"

 # Standard options:

 opt_dry_run=false

 opt_help=false

 opt_quiet=false

 opt_verbose=false

 opt_warning=:

 # func_echo arg...

 # Echo program name prefixed message, along with the current mode

 # name if it has been set yet.

 func_echo ()

 {

     $ECHO "$progname${mode+: }$mode: $*"

 }

 # func_verbose arg...

 # Echo program name prefixed message in verbose mode only.

 func_verbose ()

 {

     $opt_verbose && func_echo ${1+"$@"}

     # A bug in bash halts the script if the last line of a function

     # fails when set -e is in force, so we need another command to

     # work around that:

     :

 }

 # func_error arg...

 # Echo program name prefixed message to standard error.

 func_error ()

 {

     $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2

 }

 # func_warning arg...

 # Echo program name prefixed warning message to standard error.

 func_warning ()

 {

     $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2

     # bash bug again:

     :

 }

 # func_fatal_error arg...

 # Echo program name prefixed message to standard error, and exit.

 func_fatal_error ()

 {

     func_error ${1+"$@"}

     exit $EXIT_FAILURE

 }

 # func_fatal_help arg...

 # Echo program name prefixed message to standard error, followed by

 # a help hint, and exit.

 func_fatal_help ()

 {

     func_error ${1+"$@"}

     func_fatal_error "$help"

 }

 help="Try \`$progname --help' for more information."  ## default

 # func_grep expression filename

 # Check whether EXPRESSION matches any line of FILENAME, without output.

 func_grep ()

 {

     $GREP "$1" "$2" >/dev/null 2>&1

 }

 # func_mkdir_p directory-path

 # Make sure the entire path to DIRECTORY-PATH is available.

 func_mkdir_p ()

 {

     my_directory_path="$1"

     my_dir_list=

     if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then

       # Protect directory names starting with `-'

       case $my_directory_path in

         -*) my_directory_path="./$my_directory_path" ;;

       esac

       # While some portion of DIR does not yet exist...

       while test ! -d "$my_directory_path"; do

         # ...make a list in topmost first order.  Use a colon delimited

 	# list incase some portion of path contains whitespace.

         my_dir_list="$my_directory_path:$my_dir_list"

         # If the last portion added has no slash in it, the list is done

         case $my_directory_path in */*) ;; *) break ;; esac

         # ...otherwise throw away the child directory and loop

         my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`

       done

       my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`

       save_mkdir_p_IFS="$IFS"; IFS=':'

       for my_dir in $my_dir_list; do

 	IFS="$save_mkdir_p_IFS"

         # mkdir can fail with a `File exist' error if two processes

         # try to create one of the directories concurrently.  Don't

         # stop in that case!

         $MKDIR "$my_dir" 2>/dev/null || :

       done

       IFS="$save_mkdir_p_IFS"

       # Bail out if we (or some other process) failed to create a directory.

       test -d "$my_directory_path" || \

         func_fatal_error "Failed to create \`$1'"

     fi

 }

 # func_mktempdir [string]

 # Make a temporary directory that won't clash with other running

 # libtool processes, and avoids race conditions if possible.  If

 # given, STRING is the basename for that directory.

 func_mktempdir ()

 {

     my_template="${TMPDIR-/tmp}/${1-$progname}"

     if test "$opt_dry_run" = ":"; then

       # Return a directory name, but don't create it in dry-run mode

       my_tmpdir="${my_template}-$$"

     else

       # If mktemp works, use that first and foremost

       my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`

       if test ! -d "$my_tmpdir"; then

         # Failing that, at least try and use $RANDOM to avoid a race

         my_tmpdir="${my_template}-${RANDOM-0}$$"

         save_mktempdir_umask=`umask`

         umask 0077

         $MKDIR "$my_tmpdir"

         umask $save_mktempdir_umask

       fi

       # If we're not in dry-run mode, bomb out on failure

       test -d "$my_tmpdir" || \

         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"

     fi

     $ECHO "X$my_tmpdir" | $Xsed

 }

 # func_quote_for_eval arg

 # Aesthetically quote ARG to be evaled later.

 # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT

 # is double-quoted, suitable for a subsequent eval, whereas

 # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters

 # which are still active within double quotes backslashified.

 func_quote_for_eval ()

 {

     case $1 in

       *[\\\`\"\$]*)

 	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;

       *)

         func_quote_for_eval_unquoted_result="$1" ;;

     esac

     case $func_quote_for_eval_unquoted_result in

       # Double-quote args containing shell metacharacters to delay

       # word splitting, command substitution and and variable

       # expansion for a subsequent eval.

       # Many Bourne shells cannot handle close brackets correctly

       # in scan sets, so we specify it separately.

       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")

         func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""

         ;;

       *)

         func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"

     esac

 }

 # func_quote_for_expand arg

 # Aesthetically quote ARG to be evaled later; same as above,

 # but do not quote variable references.

 func_quote_for_expand ()

 {

     case $1 in

       *[\\\`\"]*)

 	my_arg=`$ECHO "X$1" | $Xsed \

 	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;

       *)

         my_arg="$1" ;;

     esac

     case $my_arg in

       # Double-quote args containing shell metacharacters to delay

       # word splitting and command substitution for a subsequent eval.

       # Many Bourne shells cannot handle close brackets correctly

       # in scan sets, so we specify it separately.

       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")

         my_arg="\"$my_arg\""

         ;;

     esac

     func_quote_for_expand_result="$my_arg"

 }

 # func_show_eval cmd [fail_exp]

 # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is

 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP

 # is given, then evaluate it.

 func_show_eval ()

 {

     my_cmd="$1"

     my_fail_exp="${2-:}"

     ${opt_silent-false} || {

       func_quote_for_expand "$my_cmd"

       eval "func_echo $func_quote_for_expand_result"

     }

     if ${opt_dry_run-false}; then :; else

       eval "$my_cmd"

       my_status=$?

       if test "$my_status" -eq 0; then :; else

 	eval "(exit $my_status); $my_fail_exp"

       fi

     fi

 }

 # func_show_eval_locale cmd [fail_exp]

 # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is

 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP

 # is given, then evaluate it.  Use the saved locale for evaluation.

 func_show_eval_locale ()

 {

     my_cmd="$1"

     my_fail_exp="${2-:}"

     ${opt_silent-false} || {

       func_quote_for_expand "$my_cmd"

       eval "func_echo $func_quote_for_expand_result"

     }

     if ${opt_dry_run-false}; then :; else

       eval "$lt_user_locale

 	    $my_cmd"

       my_status=$?

       eval "$lt_safe_locale"

       if test "$my_status" -eq 0; then :; else

 	eval "(exit $my_status); $my_fail_exp"

       fi

     fi

 }

 # func_version

 # Echo version message to standard output and exit.

 func_version ()

 {

     $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {

         s/^# //

 	s/^# *$//

         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/

         p

      }' < "$progpath"

      exit $?

 }

 # func_usage

 # Echo short help message to standard output and exit.

 func_usage ()

 {

     $SED -n '/^# Usage:/,/# -h/ {

         s/^# //

 	s/^# *$//

 	s/\$progname/'$progname'/

 	p

     }' < "$progpath"

     $ECHO

     $ECHO "run \`$progname --help | more' for full usage"

     exit $?

 }

 # func_help

 # Echo long help message to standard output and exit.

 func_help ()

 {

     $SED -n '/^# Usage:/,/# Report bugs to/ {

         s/^# //

 	s/^# *$//

 	s*\$progname*'$progname'*

 	s*\$host*'"$host"'*

 	s*\$SHELL*'"$SHELL"'*

 	s*\$LTCC*'"$LTCC"'*

 	s*\$LTCFLAGS*'"$LTCFLAGS"'*

 	s*\$LD*'"$LD"'*

 	s/\$with_gnu_ld/'"$with_gnu_ld"'/

 	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/

 	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/

 	p

      }' < "$progpath"

     exit $?

 }

 # func_missing_arg argname

 # Echo program name prefixed message to standard error and set global

 # exit_cmd.

 func_missing_arg ()

 {

     func_error "missing argument for $1"

     exit_cmd=exit

 }

 exit_cmd=:

 # Check that we have a working $ECHO.

 if test "X$1" = X--no-reexec; then

   # Discard the --no-reexec flag, and continue.

   shift

 elif test "X$1" = X--fallback-echo; then

   # Avoid inline document here, it may be left over

   :

 elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then

   # Yippee, $ECHO works!

   :

 else

   # Restart under the correct shell, and then maybe $ECHO will work.

   exec $SHELL "$progpath" --no-reexec ${1+"$@"}

 fi

 if test "X$1" = X--fallback-echo; then

   # used as fallback echo

   shift

   cat <<EOF

 $*

 EOF

   exit $EXIT_SUCCESS

 fi

 magic="%%%MAGIC variable%%%"

 magic_exe="%%%MAGIC EXE variable%%%"

 # Global variables.

 # $mode is unset

 nonopt=

 execute_dlfiles=

 preserve_args=

 lo2o="s/\\.lo\$/.${objext}/"

 o2lo="s/\\.${objext}\$/.lo/"

 extracted_archives=

 extracted_serial=0

 opt_dry_run=false

 opt_duplicate_deps=false

 opt_silent=false

 opt_debug=:

 # If this variable is set in any of the actions, the command in it

 # will be execed at the end.  This prevents here-documents from being

 # left over by shells.

 exec_cmd=

 # func_fatal_configuration arg...

 # Echo program name prefixed message to standard error, followed by

 # a configuration failure hint, and exit.

 func_fatal_configuration ()

 {

     func_error ${1+"$@"}

     func_error "See the $PACKAGE documentation for more information."

     func_fatal_error "Fatal configuration error."

 }

 # func_config

 # Display the configuration for all the tags in this script.

 func_config ()

 {

     re_begincf='^# ### BEGIN LIBTOOL'

     re_endcf='^# ### END LIBTOOL'

     # Default configuration.

     $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"

     # Now print the configurations for the tags.

     for tagname in $taglist; do

       $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"

     done

     exit $?

 }

 # func_features

 # Display the features supported by this script.

 func_features ()

 {

     $ECHO "host: $host"

     if test "$build_libtool_libs" = yes; then

       $ECHO "enable shared libraries"

     else

       $ECHO "disable shared libraries"

     fi

     if test "$build_old_libs" = yes; then

       $ECHO "enable static libraries"

     else

       $ECHO "disable static libraries"

     fi

     exit $?

 }

 # func_enable_tag tagname

 # Verify that TAGNAME is valid, and either flag an error and exit, or

 # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist

 # variable here.

 func_enable_tag ()

 {

   # Global variable:

   tagname="$1"

   re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"

   re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"

   sed_extractcf="/$re_begincf/,/$re_endcf/p"

   # Validate tagname.

   case $tagname in

     *[!-_A-Za-z0-9,/]*)

       func_fatal_error "invalid tag name: $tagname"

       ;;

   esac

   # Don't test for the "default" C tag, as we know it's

   # there but not specially marked.

   case $tagname in

     CC) ;;

     *)

       if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then

 	taglist="$taglist $tagname"

 	# Evaluate the configuration.  Be careful to quote the path

 	# and the sed script, to avoid splitting on whitespace, but

 	# also don't use non-portable quotes within backquotes within

 	# quotes we have to do it in 2 steps:

 	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`

 	eval "$extractedcf"

       else

 	func_error "ignoring unknown tag $tagname"

       fi

       ;;

   esac

 }

 # Parse options once, thoroughly.  This comes as soon as possible in

 # the script to make things like `libtool --version' happen quickly.

 {

   # Shorthand for --mode=foo, only valid as the first argument

   case $1 in

   clean|clea|cle|cl)

     shift; set dummy --mode clean ${1+"$@"}; shift

     ;;

   compile|compil|compi|comp|com|co|c)

     shift; set dummy --mode compile ${1+"$@"}; shift

     ;;

   execute|execut|execu|exec|exe|ex|e)

     shift; set dummy --mode execute ${1+"$@"}; shift

     ;;

   finish|finis|fini|fin|fi|f)

     shift; set dummy --mode finish ${1+"$@"}; shift

     ;;

   install|instal|insta|inst|ins|in|i)

     shift; set dummy --mode install ${1+"$@"}; shift

     ;;

   link|lin|li|l)

     shift; set dummy --mode link ${1+"$@"}; shift

     ;;

   uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)

     shift; set dummy --mode uninstall ${1+"$@"}; shift

     ;;

   esac

   # Parse non-mode specific arguments:

   while test "$#" -gt 0; do

     opt="$1"

     shift

     case $opt in

       --config)		func_config					;;

       --debug)		preserve_args="$preserve_args $opt"

 			func_echo "enabling shell trace mode"

 			opt_debug='set -x'

 			$opt_debug

 			;;

       -dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break

 			execute_dlfiles="$execute_dlfiles $1"

 			shift

 			;;

       --dry-run | -n)	opt_dry_run=:					;;

       --features)       func_features					;;

       --finish)		mode="finish"					;;

       --mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break

 			case $1 in

 			  # Valid mode arguments:

 			  clean)	;;

 			  compile)	;;

 			  execute)	;;

 			  finish)	;;

 			  install)	;;

 			  link)		;;

 			  relink)	;;

 			  uninstall)	;;

 			  # Catch anything else as an error

 			  *) func_error "invalid argument for $opt"

 			     exit_cmd=exit

 			     break

 			     ;;

 		        esac

 			mode="$1"

 			shift

 			;;

       --preserve-dup-deps)

 			opt_duplicate_deps=:				;;

       --quiet|--silent)	preserve_args="$preserve_args $opt"

 			opt_silent=:

 			;;

       --verbose| -v)	preserve_args="$preserve_args $opt"

 			opt_silent=false

 			;;

       --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break

 			preserve_args="$preserve_args $opt $1"

 			func_enable_tag "$1"	# tagname is set here

 			shift

 			;;

       # Separate optargs to long options:

       -dlopen=*|--mode=*|--tag=*)

 			func_opt_split "$opt"

 			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}

 			shift

 			;;

       -\?|-h)		func_usage					;;

       --help)		opt_help=:					;;

       --version)	func_version					;;

       -*)		func_fatal_help "unrecognized option \`$opt'"	;;

       *)		nonopt="$opt"

 			break

 			;;

     esac

   done

   case $host in

     *cygwin* | *mingw* | *pw32* | *cegcc*)

       # don't eliminate duplications in $postdeps and $predeps

       opt_duplicate_compiler_generated_deps=:

       ;;

     *)

       opt_duplicate_compiler_generated_deps=$opt_duplicate_deps

       ;;

   esac

   # Having warned about all mis-specified options, bail out if

   # anything was wrong.

   $exit_cmd $EXIT_FAILURE

 }

 # func_check_version_match

 # Ensure that we are using m4 macros, and libtool script from the same

 # release of libtool.

 func_check_version_match ()

 {

   if test "$package_revision" != "$macro_revision"; then

     if test "$VERSION" != "$macro_version"; then

       if test -z "$macro_version"; then

         cat >&2 <<_LT_EOF

 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the

 $progname: definition of this LT_INIT comes from an older release.

 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION

 $progname: and run autoconf again.

 _LT_EOF

       else

         cat >&2 <<_LT_EOF

 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the

 $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.

 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION

 $progname: and run autoconf again.

 _LT_EOF

       fi

     else

       cat >&2 <<_LT_EOF

 $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,

 $progname: but the definition of this LT_INIT comes from revision $macro_revision.

 $progname: You should recreate aclocal.m4 with macros from revision $package_revision

 $progname: of $PACKAGE $VERSION and run autoconf again.

 _LT_EOF

     fi

     exit $EXIT_MISMATCH

   fi

 }

 ## ----------- ##

 ##    Main.    ##

 ## ----------- ##

 $opt_help || {

   # Sanity checks first:

   func_check_version_match

   if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then

     func_fatal_configuration "not configured to build any kind of library"

   fi

   test -z "$mode" && func_fatal_error "error: you must specify a MODE."

   # Darwin sucks

   eval std_shrext=\"$shrext_cmds\"

   # Only execute mode is allowed to have -dlopen flags.

   if test -n "$execute_dlfiles" && test "$mode" != execute; then

     func_error "unrecognized option \`-dlopen'"

     $ECHO "$help" 1>&2

     exit $EXIT_FAILURE

   fi

   # Change the help message to a mode-specific one.

   generic_help="$help"

   help="Try \`$progname --help --mode=$mode' for more information."

 }

 # func_lalib_p file

 # True iff FILE is a libtool `.la' library or `.lo' object file.

 # This function is only a basic sanity check; it will hardly flush out

 # determined imposters.

 func_lalib_p ()

 {

     test -f "$1" &&

       $SED -e 4q "$1" 2>/dev/null \

         | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1

 }

 # func_lalib_unsafe_p file

 # True iff FILE is a libtool `.la' library or `.lo' object file.

 # This function implements the same check as func_lalib_p without

 # resorting to external programs.  To this end, it redirects stdin and

 # closes it afterwards, without saving the original file descriptor.

 # As a safety measure, use it only where a negative result would be

 # fatal anyway.  Works if `file' does not exist.

 func_lalib_unsafe_p ()

 {

     lalib_p=no

     if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then

 	for lalib_p_l in 1 2 3 4

 	do

 	    read lalib_p_line

 	    case "$lalib_p_line" in

 		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;

 	    esac

 	done

 	exec 0<&5 5<&-

     fi

     test "$lalib_p" = yes

 }

 # func_ltwrapper_script_p file

 # True iff FILE is a libtool wrapper script

 # This function is only a basic sanity check; it will hardly flush out

 # determined imposters.

 func_ltwrapper_script_p ()

 {

     func_lalib_p "$1"

 }

 # func_ltwrapper_executable_p file

 # True iff FILE is a libtool wrapper executable

 # This function is only a basic sanity check; it will hardly flush out

 # determined imposters.

 func_ltwrapper_executable_p ()

 {

     func_ltwrapper_exec_suffix=

     case $1 in

     *.exe) ;;

     *) func_ltwrapper_exec_suffix=.exe ;;

     esac

     $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1

 }

 # func_ltwrapper_scriptname file

 # Assumes file is an ltwrapper_executable

 # uses $file to determine the appropriate filename for a

 # temporary ltwrapper_script.

 func_ltwrapper_scriptname ()

 {

     func_ltwrapper_scriptname_result=""

     if func_ltwrapper_executable_p "$1"; then

 	func_dirname_and_basename "$1" "" "."

 	func_stripname '' '.exe' "$func_basename_result"

 	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"

     fi

 }

 # func_ltwrapper_p file

 # True iff FILE is a libtool wrapper script or wrapper executable

 # This function is only a basic sanity check; it will hardly flush out

 # determined imposters.

 func_ltwrapper_p ()

 {

     func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"

 }

 # func_execute_cmds commands fail_cmd

 # Execute tilde-delimited COMMANDS.

 # If FAIL_CMD is given, eval that upon failure.

 # FAIL_CMD may read-access the current command in variable CMD!

 func_execute_cmds ()

 {

     $opt_debug

     save_ifs=$IFS; IFS='~'

     for cmd in $1; do

       IFS=$save_ifs

       eval cmd=\"$cmd\"

       func_show_eval "$cmd" "${2-:}"

     done

     IFS=$save_ifs

 }

 # func_source file

 # Source FILE, adding directory component if necessary.

 # Note that it is not necessary on cygwin/mingw to append a dot to

 # FILE even if both FILE and FILE.exe exist: automatic-append-.exe

 # behavior happens only for exec(3), not for open(2)!  Also, sourcing

 # `FILE.' does not work on cygwin managed mounts.

 func_source ()

 {

     $opt_debug

     case $1 in

     */* | *\\*)	. "$1" ;;

     *)		. "./$1" ;;

     esac

 }

 # func_infer_tag arg

 # Infer tagged configuration to use if any are available and

 # if one wasn't chosen via the "--tag" command line option.

 # Only attempt this if the compiler in the base compile

 # command doesn't match the default compiler.

 # arg is usually of the form 'gcc ...'

 func_infer_tag ()

 {

     $opt_debug

     if test -n "$available_tags" && test -z "$tagname"; then

       CC_quoted=

       for arg in $CC; do

         func_quote_for_eval "$arg"

 	CC_quoted="$CC_quoted $func_quote_for_eval_result"

       done

       case $@ in

       # Blanks in the command may have been stripped by the calling shell,

       # but not from the CC environment variable when configure was run.

       " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;

       # Blanks at the start of $base_compile will cause this to fail

       # if we don't check for them as well.

       *)

 	for z in $available_tags; do

 	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then

 	    # Evaluate the configuration.

 	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"

 	    CC_quoted=

 	    for arg in $CC; do

 	      # Double-quote args containing other shell metacharacters.

 	      func_quote_for_eval "$arg"

 	      CC_quoted="$CC_quoted $func_quote_for_eval_result"

 	    done

 	    case "$@ " in

 	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)

 	      # The compiler in the base compile command matches

 	      # the one in the tagged configuration.

 	      # Assume this is the tagged configuration we want.

 	      tagname=$z

 	      break

 	      ;;

 	    esac

 	  fi

 	done

 	# If $tagname still isn't set, then no tagged configuration

 	# was found and let the user know that the "--tag" command

 	# line option must be used.

 	if test -z "$tagname"; then

 	  func_echo "unable to infer tagged configuration"

 	  func_fatal_error "specify a tag with \`--tag'"

 #	else

 #	  func_verbose "using $tagname tagged configuration"

 	fi

 	;;

       esac

     fi

 }

 # func_write_libtool_object output_name pic_name nonpic_name

 # Create a libtool object file (analogous to a ".la" file),

 # but don't create it if we're doing a dry run.

 func_write_libtool_object ()

 {

     write_libobj=${1}

     if test "$build_libtool_libs" = yes; then

       write_lobj=\'${2}\'

     else

       write_lobj=none

     fi

     if test "$build_old_libs" = yes; then

       write_oldobj=\'${3}\'

     else

       write_oldobj=none

     fi

     $opt_dry_run || {

       cat >${write_libobj}T <<EOF

 # $write_libobj - a libtool object file

 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION

 #

 # Please DO NOT delete this file!

 # It is necessary for linking the library.

 # Name of the PIC object.

 pic_object=$write_lobj

 # Name of the non-PIC object

 non_pic_object=$write_oldobj

 EOF

       $MV "${write_libobj}T" "${write_libobj}"

     }

 }

 # func_mode_compile arg...

 func_mode_compile ()

 {

     $opt_debug

     # Get the compilation command and the source file.

     base_compile=

     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"

     suppress_opt=yes

     suppress_output=

     arg_mode=normal

     libobj=

     later=

     pie_flag=

     for arg

     do

       case $arg_mode in

       arg  )

 	# do not "continue".  Instead, add this to base_compile

 	lastarg="$arg"

 	arg_mode=normal

 	;;

       target )

 	libobj="$arg"

 	arg_mode=normal

 	continue

 	;;

       normal )

 	# Accept any command-line options.

 	case $arg in

 	-o)

 	  test -n "$libobj" && \

 	    func_fatal_error "you cannot specify \`-o' more than once"

 	  arg_mode=target

 	  continue

 	  ;;

 	-pie | -fpie | -fPIE)

           pie_flag="$pie_flag $arg"

 	  continue

 	  ;;

 	-shared | -static | -prefer-pic | -prefer-non-pic)

 	  later="$later $arg"

 	  continue

 	  ;;

 	-no-suppress)

 	  suppress_opt=no

 	  continue

 	  ;;

 	-Xcompiler)

 	  arg_mode=arg  #  the next one goes into the "base_compile" arg list

 	  continue      #  The current "srcfile" will either be retained or

 	  ;;            #  replaced later.  I would guess that would be a bug.

 	-Wc,*)

 	  func_stripname '-Wc,' '' "$arg"

 	  args=$func_stripname_result

 	  lastarg=

 	  save_ifs="$IFS"; IFS=','

 	  for arg in $args; do

 	    IFS="$save_ifs"

 	    func_quote_for_eval "$arg"

 	    lastarg="$lastarg $func_quote_for_eval_result"

 	  done

 	  IFS="$save_ifs"

 	  func_stripname ' ' '' "$lastarg"

 	  lastarg=$func_stripname_result

 	  # Add the arguments to base_compile.

 	  base_compile="$base_compile $lastarg"

 	  continue

 	  ;;

 	*)

 	  # Accept the current argument as the source file.

 	  # The previous "srcfile" becomes the current argument.

 	  #

 	  lastarg="$srcfile"

 	  srcfile="$arg"

 	  ;;

 	esac  #  case $arg

 	;;

       esac    #  case $arg_mode

       # Aesthetically quote the previous argument.

       func_quote_for_eval "$lastarg"

       base_compile="$base_compile $func_quote_for_eval_result"

     done # for arg

     case $arg_mode in

     arg)

       func_fatal_error "you must specify an argument for -Xcompile"

       ;;

     target)

       func_fatal_error "you must specify a target with \`-o'"

       ;;

     *)

       # Get the name of the library object.

       test -z "$libobj" && {

 	func_basename "$srcfile"

 	libobj="$func_basename_result"

       }

       ;;

     esac

     # Recognize several different file suffixes.

     # If the user specifies -o file.o, it is replaced with file.lo

     case $libobj in

     *.[cCFSifmso] | \

     *.ada | *.adb | *.ads | *.asm | \

     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \

     *.[fF][09]? | *.for | *.java | *.obj | *.sx)

       func_xform "$libobj"

       libobj=$func_xform_result

       ;;

     esac

     case $libobj in

     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;

     *)

       func_fatal_error "cannot determine name of library object from \`$libobj'"

       ;;

     esac

     func_infer_tag $base_compile

     for arg in $later; do

       case $arg in

       -shared)

 	test "$build_libtool_libs" != yes && \

 	  func_fatal_configuration "can not build a shared library"

 	build_old_libs=no

 	continue

 	;;

       -static)

 	build_libtool_libs=no

 	build_old_libs=yes

 	continue

 	;;

       -prefer-pic)

 	pic_mode=yes

 	continue

 	;;

       -prefer-non-pic)

 	pic_mode=no

 	continue

 	;;

       esac

     done

     func_quote_for_eval "$libobj"

     test "X$libobj" != "X$func_quote_for_eval_result" \

       && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \

       && func_warning "libobj name \`$libobj' may not contain shell special characters."

     func_dirname_and_basename "$obj" "/" ""

     objname="$func_basename_result"

     xdir="$func_dirname_result"

     lobj=${xdir}$objdir/$objname

     test -z "$base_compile" && \

       func_fatal_help "you must specify a compilation command"

     # Delete any leftover library objects.

     if test "$build_old_libs" = yes; then

       removelist="$obj $lobj $libobj ${libobj}T"

     else

       removelist="$lobj $libobj ${libobj}T"

     fi

     # On Cygwin there's no "real" PIC flag so we must build both object types

     case $host_os in

     cygwin* | mingw* | pw32* | os2* | cegcc*)

       pic_mode=default

       ;;

     esac

     if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then

       # non-PIC code in shared libraries is not supported

       pic_mode=default

     fi

     # Calculate the filename of the output object if compiler does

     # not support -o with -c

     if test "$compiler_c_o" = no; then

       output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}

       lockfile="$output_obj.lock"

     else

       output_obj=

       need_locks=no

       lockfile=

     fi

     # Lock this critical section if it is needed

     # We use this script file to make the link, it avoids creating a new file

     if test "$need_locks" = yes; then

       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do

 	func_echo "Waiting for $lockfile to be removed"

 	sleep 2

       done

     elif test "$need_locks" = warn; then

       if test -f "$lockfile"; then

 	$ECHO "\

 *** ERROR, $lockfile exists and contains:

 `cat $lockfile 2>/dev/null`

 This indicates that another process is trying to use the same

 temporary object file, and libtool could not work around it because

 your compiler does not support \`-c' and \`-o' together.  If you

 repeat this compilation, it may succeed, by chance, but you had better

 avoid parallel builds (make -j) in this platform, or get a better

 compiler."

 	$opt_dry_run || $RM $removelist

 	exit $EXIT_FAILURE

       fi

       removelist="$removelist $output_obj"

       $ECHO "$srcfile" > "$lockfile"

     fi

     $opt_dry_run || $RM $removelist

     removelist="$removelist $lockfile"

     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15

     if test -n "$fix_srcfile_path"; then

       eval srcfile=\"$fix_srcfile_path\"

     fi

     func_quote_for_eval "$srcfile"

     qsrcfile=$func_quote_for_eval_result

     # Only build a PIC object if we are building libtool libraries.

     if test "$build_libtool_libs" = yes; then

       # Without this assignment, base_compile gets emptied.

       fbsd_hideous_sh_bug=$base_compile

       if test "$pic_mode" != no; then

 	command="$base_compile $qsrcfile $pic_flag"

       else

 	# Don't build PIC code

 	command="$base_compile $qsrcfile"

       fi

       func_mkdir_p "$xdir$objdir"

       if test -z "$output_obj"; then

 	# Place PIC objects in $objdir

 	command="$command -o $lobj"

       fi

       func_show_eval_locale "$command"	\

           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'

       if test "$need_locks" = warn &&

 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then

 	$ECHO "\

 *** ERROR, $lockfile contains:

 `cat $lockfile 2>/dev/null`

 but it should contain:

 $srcfile

 This indicates that another process is trying to use the same

 temporary object file, and libtool could not work around it because

 your compiler does not support \`-c' and \`-o' together.  If you

 repeat this compilation, it may succeed, by chance, but you had better

 avoid parallel builds (make -j) in this platform, or get a better

 compiler."

 	$opt_dry_run || $RM $removelist

 	exit $EXIT_FAILURE

       fi

       # Just move the object if needed, then go on to compile the next one

       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then

 	func_show_eval '$MV "$output_obj" "$lobj"' \

 	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'

       fi

       # Allow error messages only from the first compilation.

       if test "$suppress_opt" = yes; then

 	suppress_output=' >/dev/null 2>&1'

       fi

     fi

     # Only build a position-dependent object if we build old libraries.

     if test "$build_old_libs" = yes; then

       if test "$pic_mode" != yes; then

 	# Don't build PIC code

 	command="$base_compile $qsrcfile$pie_flag"

       else

 	command="$base_compile $qsrcfile $pic_flag"

       fi

       if test "$compiler_c_o" = yes; then

 	command="$command -o $obj"

       fi

       # Suppress compiler output if we already did a PIC compilation.

       command="$command$suppress_output"

       func_show_eval_locale "$command" \

         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'

       if test "$need_locks" = warn &&

 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then

 	$ECHO "\

 *** ERROR, $lockfile contains:

 `cat $lockfile 2>/dev/null`

 but it should contain:

 $srcfile

 This indicates that another process is trying to use the same

 temporary object file, and libtool could not work around it because

 your compiler does not support \`-c' and \`-o' together.  If you

 repeat this compilation, it may succeed, by chance, but you had better

 avoid parallel builds (make -j) in this platform, or get a better

 compiler."

 	$opt_dry_run || $RM $removelist

 	exit $EXIT_FAILURE

       fi

       # Just move the object if needed

       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then

 	func_show_eval '$MV "$output_obj" "$obj"' \

 	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'

       fi

     fi

     $opt_dry_run || {

       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"

       # Unlock the critical section if it was locked

       if test "$need_locks" != no; then

 	removelist=$lockfile

         $RM "$lockfile"

       fi

     }

     exit $EXIT_SUCCESS

 }

 $opt_help || {

 test "$mode" = compile && func_mode_compile ${1+"$@"}

 }

 func_mode_help ()

 {

     # We need to display help for each of the modes.

     case $mode in

       "")

         # Generic help is extracted from the usage comments

         # at the start of this file.

         func_help

         ;;

       clean)

         $ECHO \

 "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...

 Remove files from the build directory.

 RM is the name of the program to use to delete files associated with each FILE

 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed

 to RM.

 If FILE is a libtool library, object or program, all the files associated

 with it are deleted. Otherwise, only FILE itself is deleted using RM."

         ;;

       compile)

       $ECHO \

 "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE

 Compile a source file into a libtool library object.

 This mode accepts the following additional options:

   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE

   -no-suppress      do not suppress compiler output for multiple passes

   -prefer-pic       try to building PIC objects only

   -prefer-non-pic   try to building non-PIC objects only

   -shared           do not build a \`.o' file suitable for static linking

   -static           only build a \`.o' file suitable for static linking

 COMPILE-COMMAND is a command to be used in creating a \`standard' object file

 from the given SOURCEFILE.

 The output file name is determined by removing the directory component from

 SOURCEFILE, then substituting the C source code suffix \`.c' with the

 library object suffix, \`.lo'."

         ;;

       execute)

         $ECHO \

 "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...

 Automatically set library path, then run a program.

 This mode accepts the following additional options:

   -dlopen FILE      add the directory containing FILE to the library path

 This mode sets the library path environment variable according to \`-dlopen'

 flags.

 If any of the ARGS are libtool executable wrappers, then they are translated

 into their corresponding uninstalled binary, and any of their required library

 directories are added to the library path.

 Then, COMMAND is executed, with ARGS as arguments."

         ;;

       finish)

         $ECHO \

 "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...

 Complete the installation of libtool libraries.

 Each LIBDIR is a directory that contains libtool libraries.

 The commands that this mode executes may require superuser privileges.  Use

 the \`--dry-run' option if you just want to see what would be executed."

         ;;

       install)

         $ECHO \

 "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...

 Install executables or libraries.

 INSTALL-COMMAND is the installation command.  The first component should be

 either the \`install' or \`cp' program.

 The following components of INSTALL-COMMAND are treated specially:

   -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation

 The rest of the components are interpreted as arguments to that command (only

 BSD-compatible install options are recognized)."

         ;;

       link)

         $ECHO \

 "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...

 Link object files or libraries together to form another library, or to

 create an executable program.

 LINK-COMMAND is a command using the C compiler that you would use to create

 a program from several object files.

 The following components of LINK-COMMAND are treated specially:

   -all-static       do not do any dynamic linking at all

   -avoid-version    do not add a version suffix if possible

   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime

   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols

   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)

   -export-symbols SYMFILE

                     try to export only the symbols listed in SYMFILE

   -export-symbols-regex REGEX

                     try to export only the symbols matching REGEX

   -LLIBDIR          search LIBDIR for required installed libraries

   -lNAME            OUTPUT-FILE requires the installed library libNAME

   -module           build a library that can dlopened

   -no-fast-install  disable the fast-install mode

   -no-install       link a not-installable executable

   -no-undefined     declare that a library does not refer to external symbols

   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects

   -objectlist FILE  Use a list of object files found in FILE to specify objects

   -precious-files-regex REGEX

                     don't remove output files matching REGEX

   -release RELEASE  specify package release information

   -rpath LIBDIR     the created library will eventually be installed in LIBDIR

   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries

   -shared           only do dynamic linking of libtool libraries

   -shrext SUFFIX    override the standard shared library file extension

   -static           do not do any dynamic linking of uninstalled libtool libraries

   -static-libtool-libs

                     do not do any dynamic linking of libtool libraries

   -version-info CURRENT[:REVISION[:AGE]]

                     specify library version info [each variable defaults to 0]

   -weak LIBNAME     declare that the target provides the LIBNAME interface

 All other options (arguments beginning with \`-') are ignored.

 Every other argument is treated as a filename.  Files ending in \`.la' are

 treated as uninstalled libtool libraries, other files are standard or library

 object files.

 If the OUTPUT-FILE ends in \`.la', then a libtool library is created,

 only library objects (\`.lo' files) may be specified, and \`-rpath' is

 required, except when creating a convenience library.

 If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created

 using \`ar' and \`ranlib', or on Windows using \`lib'.

 If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file

 is created, otherwise an executable program is created."

         ;;

       uninstall)

         $ECHO \

 "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...

 Remove libraries from an installation directory.

 RM is the name of the program to use to delete files associated with each FILE

 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed

 to RM.

 If FILE is a libtool library, all the files associated with it are deleted.

 Otherwise, only FILE itself is deleted using RM."

         ;;

       *)

         func_fatal_help "invalid operation mode \`$mode'"

         ;;

     esac

     $ECHO

     $ECHO "Try \`$progname --help' for more information about other modes."

     exit $?

 }

   # Now that we've collected a possible --mode arg, show help if necessary

   $opt_help && func_mode_help

 # func_mode_execute arg...

 func_mode_execute ()

 {

     $opt_debug

     # The first argument is the command name.

     cmd="$nonopt"

     test -z "$cmd" && \

       func_fatal_help "you must specify a COMMAND"

     # Handle -dlopen flags immediately.

     for file in $execute_dlfiles; do

       test -f "$file" \

 	|| func_fatal_help "\`$file' is not a file"

       dir=

       case $file in

       *.la)

 	# Check to see that this really is a libtool archive.

 	func_lalib_unsafe_p "$file" \

 	  || func_fatal_help "\`$lib' is not a valid libtool archive"

 	# Read the libtool library.

 	dlname=

 	library_names=

 	func_source "$file"

 	# Skip this library if it cannot be dlopened.

 	if test -z "$dlname"; then

 	  # Warn if it was a shared library.

 	  test -n "$library_names" && \

 	    func_warning "\`$file' was not linked with \`-export-dynamic'"

 	  continue

 	fi

 	func_dirname "$file" "" "."

 	dir="$func_dirname_result"

 	if test -f "$dir/$objdir/$dlname"; then

 	  dir="$dir/$objdir"

 	else

 	  if test ! -f "$dir/$dlname"; then

 	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"

 	  fi

 	fi

 	;;

       *.lo)

 	# Just add the directory containing the .lo file.

 	func_dirname "$file" "" "."

 	dir="$func_dirname_result"

 	;;

       *)

 	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"

 	continue

 	;;

       esac

       # Get the absolute pathname.

       absdir=`cd "$dir" && pwd`

       test -n "$absdir" && dir="$absdir"

       # Now add the directory to shlibpath_var.

       if eval "test -z \"\$$shlibpath_var\""; then

 	eval "$shlibpath_var=\"\$dir\""

       else

 	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""

       fi

     done

     # This variable tells wrapper scripts just to set shlibpath_var

     # rather than running their programs.

     libtool_execute_magic="$magic"

     # Check if any of the arguments is a wrapper script.

     args=

     for file

     do

       case $file in

       -*) ;;

       *)

 	# Do a test to see if this is really a libtool program.

 	if func_ltwrapper_script_p "$file"; then

 	  func_source "$file"

 	  # Transform arg to wrapped name.

 	  file="$progdir/$program"

 	elif func_ltwrapper_executable_p "$file"; then

 	  func_ltwrapper_scriptname "$file"

 	  func_source "$func_ltwrapper_scriptname_result"

 	  # Transform arg to wrapped name.

 	  file="$progdir/$program"

 	fi

 	;;

       esac

       # Quote arguments (to preserve shell metacharacters).

       func_quote_for_eval "$file"

       args="$args $func_quote_for_eval_result"

     done

     if test "X$opt_dry_run" = Xfalse; then

       if test -n "$shlibpath_var"; then

 	# Export the shlibpath_var.

 	eval "export $shlibpath_var"

       fi

       # Restore saved environment variables

       for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES

       do

 	eval "if test \"\${save_$lt_var+set}\" = set; then

                 $lt_var=\$save_$lt_var; export $lt_var

 	      else

 		$lt_unset $lt_var

 	      fi"

       done

       # Now prepare to actually exec the command.

       exec_cmd="\$cmd$args"

     else

       # Display what would be done.

       if test -n "$shlibpath_var"; then

 	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""

 	$ECHO "export $shlibpath_var"

       fi

       $ECHO "$cmd$args"

       exit $EXIT_SUCCESS

     fi

 }

 test "$mode" = execute && func_mode_execute ${1+"$@"}

 # func_mode_finish arg...

 func_mode_finish ()

 {

     $opt_debug

     libdirs="$nonopt"

     admincmds=

     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then

       for dir

       do

 	libdirs="$libdirs $dir"

       done

       for libdir in $libdirs; do

 	if test -n "$finish_cmds"; then

 	  # Do each command in the finish commands.

 	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds

 '"$cmd"'"'

 	fi

 	if test -n "$finish_eval"; then

 	  # Do the single finish_eval.

 	  eval cmds=\"$finish_eval\"

 	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds

        $cmds"

 	fi

       done

     fi

     # Exit here if they wanted silent mode.

     $opt_silent && exit $EXIT_SUCCESS

     $ECHO "X----------------------------------------------------------------------" | $Xsed

     $ECHO "Libraries have been installed in:"

     for libdir in $libdirs; do

       $ECHO "   $libdir"

     done

     $ECHO

     $ECHO "If you ever happen to want to link against installed libraries"

     $ECHO "in a given directory, LIBDIR, you must either use libtool, and"

     $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"

     $ECHO "flag during linking and do at least one of the following:"

     if test -n "$shlibpath_var"; then

       $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"

       $ECHO "     during execution"

     fi

     if test -n "$runpath_var"; then

       $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"

       $ECHO "     during linking"

     fi

     if test -n "$hardcode_libdir_flag_spec"; then

       libdir=LIBDIR

       eval flag=\"$hardcode_libdir_flag_spec\"

       $ECHO "   - use the \`$flag' linker flag"

     fi

     if test -n "$admincmds"; then

       $ECHO "   - have your system administrator run these commands:$admincmds"

     fi

     if test -f /etc/ld.so.conf; then

       $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"

     fi

     $ECHO

     $ECHO "See any operating system documentation about shared libraries for"

     case $host in

       solaris2.[6789]|solaris2.1[0-9])

         $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"

 	$ECHO "pages."

 	;;

       *)

         $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."

         ;;

     esac

     $ECHO "X----------------------------------------------------------------------" | $Xsed

     exit $EXIT_SUCCESS

 }

 test "$mode" = finish && func_mode_finish ${1+"$@"}

 # func_mode_install arg...

 func_mode_install ()

 {

     $opt_debug

     # There may be an optional sh(1) argument at the beginning of

     # install_prog (especially on Windows NT).

     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||

        # Allow the use of GNU shtool's install command.

        $ECHO "X$nonopt" | $GREP shtool >/dev/null; then

       # Aesthetically quote it.

       func_quote_for_eval "$nonopt"

       install_prog="$func_quote_for_eval_result "

       arg=$1

       shift

     else

       install_prog=

       arg=$nonopt

     fi

     # The real first argument should be the name of the installation program.

     # Aesthetically quote it.

     func_quote_for_eval "$arg"

     install_prog="$install_prog$func_quote_for_eval_result"

     # We need to accept at least all the BSD install flags.

     dest=

     files=

     opts=

     prev=

     install_type=

     isdir=no

     stripme=

     for arg

     do

       if test -n "$dest"; then

 	files="$files $dest"

 	dest=$arg

 	continue

       fi

       case $arg in

       -d) isdir=yes ;;

       -f)

 	case " $install_prog " in

 	*[\\\ /]cp\ *) ;;

 	*) prev=$arg ;;

 	esac

 	;;

       -g | -m | -o)

 	prev=$arg

 	;;

       -s)

 	stripme=" -s"

 	continue

 	;;

       -*)

 	;;

       *)

 	# If the previous option needed an argument, then skip it.

 	if test -n "$prev"; then

 	  prev=

 	else

 	  dest=$arg

 	  continue

 	fi

 	;;

       esac

       # Aesthetically quote the argument.

       func_quote_for_eval "$arg"

       install_prog="$install_prog $func_quote_for_eval_result"

     done

     test -z "$install_prog" && \

       func_fatal_help "you must specify an install program"

     test -n "$prev" && \

       func_fatal_help "the \`$prev' option requires an argument"

     if test -z "$files"; then

       if test -z "$dest"; then

 	func_fatal_help "no file or destination specified"

       else

 	func_fatal_help "you must specify a destination"

       fi

     fi

     # Strip any trailing slash from the destination.

     func_stripname '' '/' "$dest"

     dest=$func_stripname_result

     # Check to see that the destination is a directory.

     test -d "$dest" && isdir=yes

     if test "$isdir" = yes; then

       destdir="$dest"

       destname=

     else

       func_dirname_and_basename "$dest" "" "."

       destdir="$func_dirname_result"

       destname="$func_basename_result"

       # Not a directory, so check to see that there is only one file specified.

       set dummy $files; shift

       test "$#" -gt 1 && \

 	func_fatal_help "\`$dest' is not a directory"

     fi

     case $destdir in

     [\\/]* | [A-Za-z]:[\\/]*) ;;

     *)

       for file in $files; do

 	case $file in

 	*.lo) ;;

 	*)

 	  func_fatal_help "\`$destdir' must be an absolute directory name"

 	  ;;

 	esac

       done

       ;;

     esac

     # This variable tells wrapper scripts just to set variables rather

     # than running their programs.

     libtool_install_magic="$magic"

     staticlibs=

     future_libdirs=

     current_libdirs=

     for file in $files; do

       # Do each installation.

       case $file in

       *.$libext)

 	# Do the static libraries later.

 	staticlibs="$staticlibs $file"

 	;;

       *.la)

 	# Check to see that this really is a libtool archive.

 	func_lalib_unsafe_p "$file" \

 	  || func_fatal_help "\`$file' is not a valid libtool archive"

 	library_names=

 	old_library=

 	relink_command=

 	func_source "$file"

 	# Add the libdir to current_libdirs if it is the destination.

 	if test "X$destdir" = "X$libdir"; then

 	  case "$current_libdirs " in

 	  *" $libdir "*) ;;

 	  *) current_libdirs="$current_libdirs $libdir" ;;

 	  esac

 	else

 	  # Note the libdir as a future libdir.

 	  case "$future_libdirs " in

 	  *" $libdir "*) ;;

 	  *) future_libdirs="$future_libdirs $libdir" ;;

 	  esac

 	fi

 	func_dirname "$file" "/" ""

 	dir="$func_dirname_result"

 	dir="$dir$objdir"

 	if test -n "$relink_command"; then

 	  # Determine the prefix the user has applied to our future dir.

 	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`

 	  # Don't allow the user to place us outside of our expected

 	  # location b/c this prevents finding dependent libraries that

 	  # are installed to the same prefix.

 	  # At present, this check doesn't affect windows .dll's that

 	  # are installed into $libdir/../bin (currently, that works fine)

 	  # but it's something to keep an eye on.

 	  test "$inst_prefix_dir" = "$destdir" && \

 	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"

 	  if test -n "$inst_prefix_dir"; then

 	    # Stick the inst_prefix_dir data into the link command.

 	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`

 	  else

 	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`

 	  fi

 	  func_warning "relinking \`$file'"

 	  func_show_eval "$relink_command" \

 	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'

 	fi

 	# See the names of the shared library.

 	set dummy $library_names; shift

 	if test -n "$1"; then

 	  realname="$1"

 	  shift

 	  srcname="$realname"

 	  test -n "$relink_command" && srcname="$realname"T

 	  # Install the shared library and build the symlinks.

 	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \

 	      'exit $?'

 	  tstripme="$stripme"

 	  case $host_os in

 	  cygwin* | mingw* | pw32* | cegcc*)

 	    case $realname in

 	    *.dll.a)

 	      tstripme=""

 	      ;;

 	    esac

 	    ;;

 	  esac

 	  if test -n "$tstripme" && test -n "$striplib"; then

 	    func_show_eval "$striplib $destdir/$realname" 'exit $?'

 	  fi

 	  if test "$#" -gt 0; then

 	    # Delete the old symlinks, and create new ones.

 	    # Try `ln -sf' first, because the `ln' binary might depend on

 	    # the symlink we replace!  Solaris /bin/ln does not understand -f,

 	    # so we also need to try rm && ln -s.

 	    for linkname

 	    do

 	      test "$linkname" != "$realname" \

 		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"

 	    done

 	  fi

 	  # Do each command in the postinstall commands.

 	  lib="$destdir/$realname"

 	  func_execute_cmds "$postinstall_cmds" 'exit $?'

 	fi

 	# Install the pseudo-library for information purposes.

 	func_basename "$file"

 	name="$func_basename_result"

 	instname="$dir/$name"i

 	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'

 	# Maybe install the static library, too.

 	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"

 	;;

       *.lo)

 	# Install (i.e. copy) a libtool object.

 	# Figure out destination file name, if it wasn't already specified.

 	if test -n "$destname"; then

 	  destfile="$destdir/$destname"

 	else

 	  func_basename "$file"

 	  destfile="$func_basename_result"

 	  destfile="$destdir/$destfile"

 	fi

 	# Deduce the name of the destination old-style object file.

 	case $destfile in

 	*.lo)

 	  func_lo2o "$destfile"

 	  staticdest=$func_lo2o_result

 	  ;;

 	*.$objext)

 	  staticdest="$destfile"

 	  destfile=

 	  ;;

 	*)

 	  func_fatal_help "cannot copy a libtool object to \`$destfile'"

 	  ;;

 	esac

 	# Install the libtool object if requested.

 	test -n "$destfile" && \

 	  func_show_eval "$install_prog $file $destfile" 'exit $?'

 	# Install the old object if enabled.

 	if test "$build_old_libs" = yes; then

 	  # Deduce the name of the old-style object file.

 	  func_lo2o "$file"

 	  staticobj=$func_lo2o_result

 	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'

 	fi

 	exit $EXIT_SUCCESS

 	;;

       *)

 	# Figure out destination file name, if it wasn't already specified.

 	if test -n "$destname"; then

 	  destfile="$destdir/$destname"

 	else

 	  func_basename "$file"

 	  destfile="$func_basename_result"

 	  destfile="$destdir/$destfile"

 	fi

 	# If the file is missing, and there is a .exe on the end, strip it

 	# because it is most likely a libtool script we actually want to

 	# install

 	stripped_ext=""

 	case $file in

 	  *.exe)

 	    if test ! -f "$file"; then

 	      func_stripname '' '.exe' "$file"

 	      file=$func_stripname_result

 	      stripped_ext=".exe"

 	    fi

 	    ;;

 	esac

 	# Do a test to see if this is really a libtool program.

 	case $host in

 	*cygwin* | *mingw*)

 	    if func_ltwrapper_executable_p "$file"; then

 	      func_ltwrapper_scriptname "$file"

 	      wrapper=$func_ltwrapper_scriptname_result

 	    else

 	      func_stripname '' '.exe' "$file"

 	      wrapper=$func_stripname_result

 	    fi

 	    ;;

 	*)

 	    wrapper=$file

 	    ;;

 	esac

 	if func_ltwrapper_script_p "$wrapper"; then

 	  notinst_deplibs=

 	  relink_command=

 	  func_source "$wrapper"

 	  # Check the variables that should have been set.

 	  test -z "$generated_by_libtool_version" && \

 	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"

 	  finalize=yes

 	  for lib in $notinst_deplibs; do

 	    # Check to see that each library is installed.

 	    libdir=

 	    if test -f "$lib"; then

 	      func_source "$lib"

 	    fi

 	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test

 	    if test -n "$libdir" && test ! -f "$libfile"; then

 	      func_warning "\`$lib' has not been installed in \`$libdir'"

 	      finalize=no

 	    fi

 	  done

 	  relink_command=

 	  func_source "$wrapper"

 	  outputname=

 	  if test "$fast_install" = no && test -n "$relink_command"; then

 	    $opt_dry_run || {

 	      if test "$finalize" = yes; then

 	        tmpdir=`func_mktempdir`

 		func_basename "$file$stripped_ext"

 		file="$func_basename_result"

 	        outputname="$tmpdir/$file"

 	        # Replace the output file specification.

 	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`

 	        $opt_silent || {

 	          func_quote_for_expand "$relink_command"

 		  eval "func_echo $func_quote_for_expand_result"

 	        }

 	        if eval "$relink_command"; then :

 	          else

 		  func_error "error: relink \`$file' with the above command before installing it"

 		  $opt_dry_run || ${RM}r "$tmpdir"

 		  continue

 	        fi

 	        file="$outputname"

 	      else

 	        func_warning "cannot relink \`$file'"

 	      fi

 	    }

 	  else

 	    # Install the binary that we compiled earlier.

 	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`

 	  fi

 	fi

 	# remove .exe since cygwin /usr/bin/install will append another

 	# one anyway

 	case $install_prog,$host in

 	*/usr/bin/install*,*cygwin*)

 	  case $file:$destfile in

 	  *.exe:*.exe)

 	    # this is ok

 	    ;;

 	  *.exe:*)

 	    destfile=$destfile.exe

 	    ;;

 	  *:*.exe)

 	    func_stripname '' '.exe' "$destfile"

 	    destfile=$func_stripname_result

 	    ;;

 	  esac

 	  ;;

 	esac

 	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'

 	$opt_dry_run || if test -n "$outputname"; then

 	  ${RM}r "$tmpdir"

 	fi

 	;;

       esac

     done

     for file in $staticlibs; do

       func_basename "$file"

       name="$func_basename_result"

       # Set up the ranlib parameters.

       oldlib="$destdir/$name"

       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'

       if test -n "$stripme" && test -n "$old_striplib"; then

 	func_show_eval "$old_striplib $oldlib" 'exit $?'

       fi

       # Do each command in the postinstall commands.

       func_execute_cmds "$old_postinstall_cmds" 'exit $?'

     done

     test -n "$future_libdirs" && \

       func_warning "remember to run \`$progname --finish$future_libdirs'"

     if test -n "$current_libdirs"; then

       # Maybe just do a dry run.

       $opt_dry_run && current_libdirs=" -n$current_libdirs"

       exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'

     else

       exit $EXIT_SUCCESS

     fi

 }

 test "$mode" = install && func_mode_install ${1+"$@"}

 # func_generate_dlsyms outputname originator pic_p

 # Extract symbols from dlprefiles and create ${outputname}S.o with

 # a dlpreopen symbol table.

 func_generate_dlsyms ()

 {

     $opt_debug

     my_outputname="$1"

     my_originator="$2"

     my_pic_p="${3-no}"

     my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`

     my_dlsyms=

     if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then

       if test -n "$NM" && test -n "$global_symbol_pipe"; then

 	my_dlsyms="${my_outputname}S.c"

       else

 	func_error "not configured to extract global symbols from dlpreopened files"

       fi

     fi

     if test -n "$my_dlsyms"; then

       case $my_dlsyms in

       "") ;;

       *.c)

 	# Discover the nlist of each of the dlfiles.

 	nlist="$output_objdir/${my_outputname}.nm"

 	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"

 	# Parse the name list into a source file.

 	func_verbose "creating $output_objdir/$my_dlsyms"

 	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\

 /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */

 /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */

 #ifdef __cplusplus

 extern \"C\" {

 #endif

 /* External symbol declarations for the compiler. */\

 "

 	if test "$dlself" = yes; then

 	  func_verbose "generating symbol list for \`$output'"

 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"

 	  # Add our own program objects to the symbol list.

 	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`

 	  for progfile in $progfiles; do

 	    func_verbose "extracting global C symbols from \`$progfile'"

 	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"

 	  done

 	  if test -n "$exclude_expsyms"; then

 	    $opt_dry_run || {

 	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'

 	      eval '$MV "$nlist"T "$nlist"'

 	    }

 	  fi

 	  if test -n "$export_symbols_regex"; then

 	    $opt_dry_run || {

 	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'

 	      eval '$MV "$nlist"T "$nlist"'

 	    }

 	  fi

 	  # Prepare the list of exported symbols

 	  if test -z "$export_symbols"; then

 	    export_symbols="$output_objdir/$outputname.exp"

 	    $opt_dry_run || {

 	      $RM $export_symbols

 	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'

 	      case $host in

 	      *cygwin* | *mingw* | *cegcc* )

                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'

                 eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'

 	        ;;

 	      esac

 	    }

 	  else

 	    $opt_dry_run || {

 	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'

 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'

 	      eval '$MV "$nlist"T "$nlist"'

 	      case $host in

 	        *cygwin | *mingw* | *cegcc* )

 	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'

 	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'

 	          ;;

 	      esac

 	    }

 	  fi

 	fi

 	for dlprefile in $dlprefiles; do

 	  func_verbose "extracting global C symbols from \`$dlprefile'"

 	  func_basename "$dlprefile"

 	  name="$func_basename_result"

 	  $opt_dry_run || {

 	    eval '$ECHO ": $name " >> "$nlist"'

 	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"

 	  }

 	done

 	$opt_dry_run || {

 	  # Make sure we have at least an empty file.

 	  test -f "$nlist" || : > "$nlist"

 	  if test -n "$exclude_expsyms"; then

 	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T

 	    $MV "$nlist"T "$nlist"

 	  fi

 	  # Try sorting and uniquifying the output.

 	  if $GREP -v "^: " < "$nlist" |

 	      if sort -k 3 </dev/null >/dev/null 2>&1; then

 		sort -k 3

 	      else

 		sort +2

 	      fi |

 	      uniq > "$nlist"S; then

 	    :

 	  else

 	    $GREP -v "^: " < "$nlist" > "$nlist"S

 	  fi

 	  if test -f "$nlist"S; then

 	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'

 	  else

 	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"

 	  fi

 	  $ECHO >> "$output_objdir/$my_dlsyms" "\

 /* The mapping between symbol names and symbols.  */

 typedef struct {

   const char *name;

   void *address;

 } lt_dlsymlist;

 "

 	  case $host in

 	  *cygwin* | *mingw* | *cegcc* )

 	    $ECHO >> "$output_objdir/$my_dlsyms" "\

 /* DATA imports from DLLs on WIN32 con't be const, because

    runtime relocations are performed -- see ld's documentation

    on pseudo-relocs.  */"

 	    lt_dlsym_const= ;;

 	  *osf5*)

 	    echo >> "$output_objdir/$my_dlsyms" "\

 /* This system does not cope well with relocations in const data */"

 	    lt_dlsym_const= ;;

 	  *)

 	    lt_dlsym_const=const ;;

 	  esac

 	  $ECHO >> "$output_objdir/$my_dlsyms" "\

 extern $lt_dlsym_const lt_dlsymlist

 lt_${my_prefix}_LTX_preloaded_symbols[];

 $lt_dlsym_const lt_dlsymlist

 lt_${my_prefix}_LTX_preloaded_symbols[] =

 {\

   { \"$my_originator\", (void *) 0 },"

 	  case $need_lib_prefix in

 	  no)

 	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"

 	    ;;

 	  *)

 	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"

 	    ;;

 	  esac

 	  $ECHO >> "$output_objdir/$my_dlsyms" "\

   {0, (void *) 0}

 };

 /* This works around a problem in FreeBSD linker */

 #ifdef FREEBSD_WORKAROUND

 static const void *lt_preloaded_setup() {

   return lt_${my_prefix}_LTX_preloaded_symbols;

 }

 #endif

 #ifdef __cplusplus

 }

 #endif\

 "

 	} # !$opt_dry_run

 	pic_flag_for_symtable=

 	case "$compile_command " in

 	*" -static "*) ;;

 	*)

 	  case $host in

 	  # compiling the symbol table file with pic_flag works around

 	  # a FreeBSD bug that causes programs to crash when -lm is

 	  # linked before any other PIC object.  But we must not use

 	  # pic_flag when linking with -static.  The problem exists in

 	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.

 	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)

 	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;

 	  *-*-hpux*)

 	    pic_flag_for_symtable=" $pic_flag"  ;;

 	  *)

 	    if test "X$my_pic_p" != Xno; then

 	      pic_flag_for_symtable=" $pic_flag"

 	    fi

 	    ;;

 	  esac

 	  ;;

 	esac

 	symtab_cflags=

 	for arg in $LTCFLAGS; do

 	  case $arg in

 	  -pie | -fpie | -fPIE) ;;

 	  *) symtab_cflags="$symtab_cflags $arg" ;;

 	  esac

 	done

 	# Now compile the dynamic symbol file.

 	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'

 	# Clean up the generated files.

 	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'

 	# Transform the symbol file into the correct name.

 	symfileobj="$output_objdir/${my_outputname}S.$objext"

 	case $host in

 	*cygwin* | *mingw* | *cegcc* )

 	  if test -f "$output_objdir/$my_outputname.def"; then

 	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`

 	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`

 	  else

 	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`

 	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`

 	  fi

 	  ;;

 	*)

 	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`

 	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`

 	  ;;

 	esac

 	;;

       *)

 	func_fatal_error "unknown suffix for \`$my_dlsyms'"

 	;;

       esac

     else

       # We keep going just in case the user didn't refer to

       # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe

       # really was required.

       # Nullify the symbol file.

       compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`

       finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`

     fi

 }

 # func_win32_libid arg

 # return the library type of file 'arg'

 #

 # Need a lot of goo to handle *both* DLLs and import libs

 # Has to be a shell function in order to 'eat' the argument

 # that is supplied when $file_magic_command is called.

 func_win32_libid ()

 {

   $opt_debug

   win32_libid_type="unknown"

   win32_fileres=`file -L $1 2>/dev/null`

   case $win32_fileres in

   *ar\ archive\ import\ library*) # definitely import

     win32_libid_type="x86 archive import"

     ;;

   *ar\ archive*) # could be an import, or static

     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |

        $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then

       win32_nmres=`eval $NM -f posix -A $1 |

 	$SED -n -e '

 	    1,100{

 		/ I /{

 		    s,.*,import,

 		    p

 		    q

 		}

 	    }'`

       case $win32_nmres in

       import*)  win32_libid_type="x86 archive import";;

       *)        win32_libid_type="x86 archive static";;

       esac

     fi

     ;;

   *DLL*)

     win32_libid_type="x86 DLL"

     ;;

   *executable*) # but shell scripts are "executable" too...

     case $win32_fileres in

     *MS\ Windows\ PE\ Intel*)

       win32_libid_type="x86 DLL"

       ;;

     esac

     ;;

   esac

   $ECHO "$win32_libid_type"

 }

 # func_extract_an_archive dir oldlib

 func_extract_an_archive ()

 {

     $opt_debug

     f_ex_an_ar_dir="$1"; shift

     f_ex_an_ar_oldlib="$1"

     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'

     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then

      :

     else

       func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"

     fi

 }

 # func_extract_archives gentop oldlib ...

 func_extract_archives ()

 {

     $opt_debug

     my_gentop="$1"; shift

     my_oldlibs=${1+"$@"}

     my_oldobjs=""

     my_xlib=""

     my_xabs=""

     my_xdir=""

     for my_xlib in $my_oldlibs; do

       # Extract the objects.

       case $my_xlib in

 	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;

 	*) my_xabs=`pwd`"/$my_xlib" ;;

       esac

       func_basename "$my_xlib"

       my_xlib="$func_basename_result"

       my_xlib_u=$my_xlib

       while :; do

         case " $extracted_archives " in

 	*" $my_xlib_u "*)

 	  func_arith $extracted_serial + 1

 	  extracted_serial=$func_arith_result

 	  my_xlib_u=lt$extracted_serial-$my_xlib ;;

 	*) break ;;

 	esac

       done

       extracted_archives="$extracted_archives $my_xlib_u"

       my_xdir="$my_gentop/$my_xlib_u"

       func_mkdir_p "$my_xdir"

       case $host in

       *-darwin*)

 	func_verbose "Extracting $my_xabs"

 	# Do not bother doing anything if just a dry run