The Tor Browser / file revision

 /* This Source Code Form is subject to the terms of the Mozilla Public

  * License, v. 2.0. If a copy of the MPL was not distributed with this

  * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

 # Doxyfile 1.5.5

 # This file describes the settings to be used by the documentation system

 # doxygen (www.doxygen.org) for a project

 #

 # All text after a hash (#) is considered a comment and will be ignored

 # The format is:

 #       TAG = value [value, ...]

 # For lists items can also be appended using:

 #       TAG += value [value, ...]

 # Values that contain spaces should be placed between quotes (" ")

 #---------------------------------------------------------------------------

 # Project related configuration options

 #---------------------------------------------------------------------------

 # This tag specifies the encoding used for all characters in the config file 

 # that follow. The default is UTF-8 which is also the encoding used for all 

 # text before the first occurrence of this tag. Doxygen uses libiconv (or the 

 # iconv built into libc) for the transcoding. See 

 # http://www.gnu.org/software/libiconv for the list of possible encodings.

 DOXYFILE_ENCODING      = UTF-8

 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 

 # by quotes) that should identify the project.

 PROJECT_NAME           = "Mozilla"

 # The PROJECT_NUMBER tag can be used to enter a project or revision number. 

 # This could be handy for archiving the generated documentation or 

 # if some version control system is used.

 PROJECT_NUMBER         = 

 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 

 # base path where the generated documentation will be put. 

 # If a relative path is entered, it will be relative to the location 

 # where doxygen was started. If left blank the current directory will be used.

 OUTPUT_DIRECTORY       = @MOZ_DOC_OUTPUT_DIR@

 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 

 # 4096 sub-directories (in 2 levels) under the output directory of each output 

 # format and will distribute the generated files over these directories. 

 # Enabling this option can be useful when feeding doxygen a huge amount of 

 # source files, where putting all generated files in the same directory would 

 # otherwise cause performance problems for the file system.

 CREATE_SUBDIRS         = NO

 # The OUTPUT_LANGUAGE tag is used to specify the language in which all 

 # documentation generated by doxygen is written. Doxygen will use this 

 # information to generate all constant output in the proper language. 

 # The default language is English, other supported languages are: 

 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, 

 # Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, 

 # Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), 

 # Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, 

 # Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, 

 # and Ukrainian.

 OUTPUT_LANGUAGE        = English

 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 

 # include brief member descriptions after the members that are listed in 

 # the file and class documentation (similar to JavaDoc). 

 # Set to NO to disable this.

 BRIEF_MEMBER_DESC      = YES

 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 

 # the brief description of a member or function before the detailed description. 

 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 

 # brief descriptions will be completely suppressed.

 REPEAT_BRIEF           = YES

 # This tag implements a quasi-intelligent brief description abbreviator 

 # that is used to form the text in various listings. Each string 

 # in this list, if found as the leading text of the brief description, will be 

 # stripped from the text and the result after processing the whole list, is 

 # used as the annotated text. Otherwise, the brief description is used as-is. 

 # If left blank, the following values are used ("$name" is automatically 

 # replaced with the name of the entity): "The $name class" "The $name widget" 

 # "The $name file" "is" "provides" "specifies" "contains" 

 # "represents" "a" "an" "the"

 ABBREVIATE_BRIEF       = 

 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 

 # Doxygen will generate a detailed section even if there is only a brief 

 # description.

 ALWAYS_DETAILED_SEC    = NO

 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 

 # inherited members of a class in the documentation of that class as if those 

 # members were ordinary class members. Constructors, destructors and assignment 

 # operators of the base classes will not be shown.

 INLINE_INHERITED_MEMB  = NO

 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 

 # path before files name in the file list and in the header files. If set 

 # to NO the shortest path that makes the file name unique will be used.

 FULL_PATH_NAMES        = NO

 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 

 # can be used to strip a user-defined part of the path. Stripping is 

 # only done if one of the specified strings matches the left-hand part of 

 # the path. The tag can be used to show relative paths in the file list. 

 # If left blank the directory from which doxygen is run is used as the 

 # path to strip.

 STRIP_FROM_PATH        = 

 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 

 # the path mentioned in the documentation of a class, which tells 

 # the reader which header file to include in order to use a class. 

 # If left blank only the name of the header file containing the class 

 # definition is used. Otherwise one should specify the include paths that 

 # are normally passed to the compiler using the -I flag.

 STRIP_FROM_INC_PATH    = 

 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 

 # (but less readable) file names. This can be useful is your file systems 

 # doesn't support long names like on DOS, Mac, or CD-ROM.

 SHORT_NAMES            = NO

 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 

 # will interpret the first line (until the first dot) of a JavaDoc-style 

 # comment as the brief description. If set to NO, the JavaDoc 

 # comments will behave just like regular Qt-style comments 

 # (thus requiring an explicit @brief command for a brief description.)

 JAVADOC_AUTOBRIEF      = YES

 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will 

 # interpret the first line (until the first dot) of a Qt-style 

 # comment as the brief description. If set to NO, the comments 

 # will behave just like regular Qt-style comments (thus requiring 

 # an explicit \brief command for a brief description.)

 QT_AUTOBRIEF           = NO

 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 

 # treat a multi-line C++ special comment block (i.e. a block of //! or /// 

 # comments) as a brief description. This used to be the default behaviour. 

 # The new default is to treat a multi-line C++ comment block as a detailed 

 # description. Set this tag to YES if you prefer the old behaviour instead.

 MULTILINE_CPP_IS_BRIEF = NO

 # If the DETAILS_AT_TOP tag is set to YES then Doxygen 

 # will output the detailed description near the top, like JavaDoc.

 # If set to NO, the detailed description appears after the member 

 # documentation.

 DETAILS_AT_TOP         = NO

 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 

 # member inherits the documentation from any documented member that it 

 # re-implements.

 INHERIT_DOCS           = YES

 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 

 # a new page for each member. If set to NO, the documentation of a member will 

 # be part of the file/class/namespace that contains it.

 SEPARATE_MEMBER_PAGES  = NO

 # The TAB_SIZE tag can be used to set the number of spaces in a tab. 

 # Doxygen uses this value to replace tabs by spaces in code fragments.

 TAB_SIZE               = 4

 # This tag can be used to specify a number of aliases that acts 

 # as commands in the documentation. An alias has the form "name=value". 

 # For example adding "sideeffect=\par Side Effects:\n" will allow you to 

 # put the command \sideeffect (or @sideeffect) in the documentation, which 

 # will result in a user-defined paragraph with heading "Side Effects:". 

 # You can put \n's in the value part of an alias to insert newlines.

 ALIASES                = "status=\par Status:\n"

 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 

 # sources only. Doxygen will then generate output that is more tailored for C. 

 # For instance, some of the names that are used will be different. The list 

 # of all members will be omitted, etc.

 OPTIMIZE_OUTPUT_FOR_C  = NO

 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 

 # sources only. Doxygen will then generate output that is more tailored for 

 # Java. For instance, namespaces will be presented as packages, qualified 

 # scopes will look different, etc.

 OPTIMIZE_OUTPUT_JAVA   = NO

 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran 

 # sources only. Doxygen will then generate output that is more tailored for 

 # Fortran.

 OPTIMIZE_FOR_FORTRAN   = NO

 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL 

 # sources. Doxygen will then generate output that is tailored for 

 # VHDL.

 OPTIMIZE_OUTPUT_VHDL   = NO

 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want 

 # to include (a tag file for) the STL sources as input, then you should 

 # set this tag to YES in order to let doxygen match functions declarations and 

 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 

 # func(std::string) {}). This also make the inheritance and collaboration 

 # diagrams that involve STL classes more complete and accurate.

 BUILTIN_STL_SUPPORT    = NO

 # If you use Microsoft's C++/CLI language, you should set this option to YES to

 # enable parsing support.

 CPP_CLI_SUPPORT        = NO

 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. 

 # Doxygen will parse them like normal C++ but will assume all classes use public 

 # instead of private inheritance when no explicit protection keyword is present.

 SIP_SUPPORT            = NO

 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 

 # tag is set to YES, then doxygen will reuse the documentation of the first 

 # member in the group (if any) for the other members of the group. By default 

 # all members of a group must be documented explicitly.

 DISTRIBUTE_GROUP_DOC   = YES

 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of 

 # the same type (for instance a group of public functions) to be put as a 

 # subgroup of that type (e.g. under the Public Functions section). Set it to 

 # NO to prevent subgrouping. Alternatively, this can be done per class using 

 # the \nosubgrouping command.

 SUBGROUPING            = YES

 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum 

 # is documented as struct, union, or enum with the name of the typedef. So 

 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct 

 # with name TypeT. When disabled the typedef will appear as a member of a file, 

 # namespace, or class. And the struct will be named TypeS. This can typically 

 # be useful for C code in case the coding convention dictates that all compound 

 # types are typedef'ed and only the typedef is referenced, never the tag name.

 TYPEDEF_HIDES_STRUCT   = NO

 #---------------------------------------------------------------------------

 # Build related configuration options

 #---------------------------------------------------------------------------

 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 

 # documentation are documented, even if no documentation was available. 

 # Private class members and static file members will be hidden unless 

 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

 EXTRACT_ALL            = YES

 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class 

 # will be included in the documentation.

 EXTRACT_PRIVATE        = NO

 # If the EXTRACT_STATIC tag is set to YES all static members of a file 

 # will be included in the documentation.

 EXTRACT_STATIC         = NO

 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 

 # defined locally in source files will be included in the documentation. 

 # If set to NO only classes defined in header files are included.

 EXTRACT_LOCAL_CLASSES  = YES

 # This flag is only useful for Objective-C code. When set to YES local 

 # methods, which are defined in the implementation section but not in 

 # the interface are included in the documentation. 

 # If set to NO (the default) only methods in the interface are included.

 EXTRACT_LOCAL_METHODS  = NO

 # If this flag is set to YES, the members of anonymous namespaces will be 

 # extracted and appear in the documentation as a namespace called 

 # 'anonymous_namespace{file}', where file will be replaced with the base 

 # name of the file that contains the anonymous namespace. By default 

 # anonymous namespace are hidden.

 EXTRACT_ANON_NSPACES   = NO

 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 

 # undocumented members of documented classes, files or namespaces. 

 # If set to NO (the default) these members will be included in the 

 # various overviews, but no documentation section is generated. 

 # This option has no effect if EXTRACT_ALL is enabled.

 HIDE_UNDOC_MEMBERS     = NO

 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 

 # undocumented classes that are normally visible in the class hierarchy. 

 # If set to NO (the default) these classes will be included in the various 

 # overviews. This option has no effect if EXTRACT_ALL is enabled.

 HIDE_UNDOC_CLASSES     = NO

 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 

 # friend (class|struct|union) declarations. 

 # If set to NO (the default) these declarations will be included in the 

 # documentation.

 HIDE_FRIEND_COMPOUNDS  = NO

 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 

 # documentation blocks found inside the body of a function. 

 # If set to NO (the default) these blocks will be appended to the 

 # function's detailed documentation block.

 HIDE_IN_BODY_DOCS      = NO

 # The INTERNAL_DOCS tag determines if documentation 

 # that is typed after a \internal command is included. If the tag is set 

 # to NO (the default) then the documentation will be excluded. 

 # Set it to YES to include the internal documentation.

 INTERNAL_DOCS          = NO

 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 

 # file names in lower-case letters. If set to YES upper-case letters are also 

 # allowed. This is useful if you have classes or files whose names only differ 

 # in case and if your file system supports case sensitive file names. Windows 

 # and Mac users are advised to set this option to NO.

 CASE_SENSE_NAMES       = YES

 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 

 # will show members with their full class and namespace scopes in the 

 # documentation. If set to YES the scope will be hidden.

 HIDE_SCOPE_NAMES       = NO

 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 

 # will put a list of the files that are included by a file in the documentation 

 # of that file.

 SHOW_INCLUDE_FILES     = YES

 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 

 # is inserted in the documentation for inline members.

 INLINE_INFO            = YES

 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 

 # will sort the (detailed) documentation of file and class members 

 # alphabetically by member name. If set to NO the members will appear in 

 # declaration order.

 SORT_MEMBER_DOCS       = YES

 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 

 # brief documentation of file, namespace and class members alphabetically 

 # by member name. If set to NO (the default) the members will appear in 

 # declaration order.

 SORT_BRIEF_DOCS        = NO

 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the 

 # hierarchy of group names into alphabetical order. If set to NO (the default) 

 # the group names will appear in their defined order.

 SORT_GROUP_NAMES       = NO

 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 

 # sorted by fully-qualified names, including namespaces. If set to 

 # NO (the default), the class list will be sorted only by class name, 

 # not including the namespace part. 

 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

 # Note: This option applies only to the class list, not to the 

 # alphabetical list.

 SORT_BY_SCOPE_NAME     = NO

 # The GENERATE_TODOLIST tag can be used to enable (YES) or 

 # disable (NO) the todo list. This list is created by putting \todo 

 # commands in the documentation.

 GENERATE_TODOLIST      = YES

 # The GENERATE_TESTLIST tag can be used to enable (YES) or 

 # disable (NO) the test list. This list is created by putting \test 

 # commands in the documentation.

 GENERATE_TESTLIST      = YES

 # The GENERATE_BUGLIST tag can be used to enable (YES) or 

 # disable (NO) the bug list. This list is created by putting \bug 

 # commands in the documentation.

 GENERATE_BUGLIST       = NO

 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 

 # disable (NO) the deprecated list. This list is created by putting 

 # \deprecated commands in the documentation.

 GENERATE_DEPRECATEDLIST= YES

 # The ENABLED_SECTIONS tag can be used to enable conditional 

 # documentation sections, marked by \if sectionname ... \endif.

 ENABLED_SECTIONS       = 

 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines 

 # the initial value of a variable or define consists of for it to appear in 

 # the documentation. If the initializer consists of more lines than specified 

 # here it will be hidden. Use a value of 0 to hide initializers completely. 

 # The appearance of the initializer of individual variables and defines in the 

 # documentation can be controlled using \showinitializer or \hideinitializer 

 # command in the documentation regardless of this setting.

 MAX_INITIALIZER_LINES  = 30

 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated 

 # at the bottom of the documentation of classes and structs. If set to YES the 

 # list will mention the files that were used to generate the documentation.

 SHOW_USED_FILES        = YES

 # If the sources in your project are distributed over multiple directories 

 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 

 # in the documentation. The default is NO.

 SHOW_DIRECTORIES       = NO

 # The FILE_VERSION_FILTER tag can be used to specify a program or script that 

 # doxygen should invoke to get the current version for each file (typically from 

 # the version control system). Doxygen will invoke the program by executing (via 

 # popen()) the command <command> <input-file>, where <command> is the value of 

 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 

 # provided by doxygen. Whatever the program writes to standard output 

 # is used as the file version. See the manual for examples.

 FILE_VERSION_FILTER    = 

 #---------------------------------------------------------------------------

 # configuration options related to warning and progress messages

 #---------------------------------------------------------------------------

 # The QUIET tag can be used to turn on/off the messages that are generated 

 # by doxygen. Possible values are YES and NO. If left blank NO is used.

 QUIET                  = NO

 # The WARNINGS tag can be used to turn on/off the warning messages that are 

 # generated by doxygen. Possible values are YES and NO. If left blank 

 # NO is used.

 WARNINGS               = YES

 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 

 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will 

 # automatically be disabled.

 WARN_IF_UNDOCUMENTED   = NO

 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 

 # potential errors in the documentation, such as not documenting some 

 # parameters in a documented function, or documenting parameters that 

 # don't exist or using markup commands wrongly.

 WARN_IF_DOC_ERROR      = YES

 # This WARN_NO_PARAMDOC option can be abled to get warnings for 

 # functions that are documented, but have no documentation for their parameters 

 # or return value. If set to NO (the default) doxygen will only warn about 

 # wrong or incomplete parameter documentation, but not about the absence of 

 # documentation.

 WARN_NO_PARAMDOC       = NO

 # The WARN_FORMAT tag determines the format of the warning messages that 

 # doxygen can produce. The string should contain the $file, $line, and $text 

 # tags, which will be replaced by the file and line number from which the 

 # warning originated and the warning text. Optionally the format may contain 

 # $version, which will be replaced by the version of the file (if it could 

 # be obtained via FILE_VERSION_FILTER)

 WARN_FORMAT            = 

 # The WARN_LOGFILE tag can be used to specify a file to which warning 

 # and error messages should be written. If left blank the output is written 

 # to stderr.

 WARN_LOGFILE           = 

 #---------------------------------------------------------------------------

 # configuration options related to the input files

 #---------------------------------------------------------------------------

 # The INPUT tag can be used to specify the files and/or directories that contain 

 # documented source files. You may enter file names like "myfile.cpp" or 

 # directories like "/usr/src/myproject". Separate the files or directories 

 # with spaces.

 INPUT                  = @MOZ_DOC_INPUT_DIRS@

 # This tag can be used to specify the character encoding of the source files 

 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 

 # also the default input encoding. Doxygen uses libiconv (or the iconv built 

 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 

 # the list of possible encodings.

 INPUT_ENCODING         = UTF-8

 # If the value of the INPUT tag contains directories, you can use the 

 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 

 # and *.h) to filter out the source-files in the directories. If left 

 # blank the following patterns are tested: 

 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 

 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90

 FILE_PATTERNS          = *.idl \

                          *.cpp \

                          *.h

 # The RECURSIVE tag can be used to turn specify whether or not subdirectories 

 # should be searched for input files as well. Possible values are YES and NO. 

 # If left blank NO is used.

 RECURSIVE              = YES

 # The EXCLUDE tag can be used to specify files and/or directories that should 

 # excluded from the INPUT source files. This way you can easily exclude a 

 # subdirectory from a directory tree whose root is specified with the INPUT tag.

 EXCLUDE                = 

 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or 

 # directories that are symbolic links (a Unix filesystem feature) are excluded 

 # from the input.

 EXCLUDE_SYMLINKS       = NO

 # If the value of the INPUT tag contains directories, you can use the 

 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 

 # certain files from those directories. Note that the wildcards are matched 

 # against the file with absolute path, so to exclude all test directories 

 # for example use the pattern */test/*

 EXCLUDE_PATTERNS       = nsI*.h mozI*.h imgI*.h

 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 

 # (namespaces, classes, functions, etc.) that should be excluded from the 

 # output. The symbol name can be a fully qualified name, a word, or if the 

 # wildcard * is used, a substring. Examples: ANamespace, AClass, 

 # AClass::ANamespace, ANamespace::*Test

 EXCLUDE_SYMBOLS        = nsCOMPtr_base

 # The EXAMPLE_PATH tag can be used to specify one or more files or 

 # directories that contain example code fragments that are included (see 

 # the \include command).

 EXAMPLE_PATH           = 

 # If the value of the EXAMPLE_PATH tag contains directories, you can use the 

 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 

 # and *.h) to filter out the source-files in the directories. If left 

 # blank all files are included.

 EXAMPLE_PATTERNS       = 

 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 

 # searched for input files to be used with the \include or \dontinclude 

 # commands irrespective of the value of the RECURSIVE tag. 

 # Possible values are YES and NO. If left blank NO is used.

 EXAMPLE_RECURSIVE      = NO

 # The IMAGE_PATH tag can be used to specify one or more files or 

 # directories that contain image that are included in the documentation (see 

 # the \image command).

 IMAGE_PATH             = 

 # The INPUT_FILTER tag can be used to specify a program that doxygen should 

 # invoke to filter for each input file. Doxygen will invoke the filter program 

 # by executing (via popen()) the command <filter> <input-file>, where <filter> 

 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an 

 # input file. Doxygen will then use the output that the filter program writes 

 # to standard output.  If FILTER_PATTERNS is specified, this tag will be 

 # ignored.

 INPUT_FILTER           = 

 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 

 # basis.  Doxygen will compare the file name with each pattern and apply the 

 # filter if there is a match.  The filters are a list of the form: 

 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 

 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 

 # is applied to all files.

 FILTER_PATTERNS        = 

 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 

 # INPUT_FILTER) will be used to filter the input files when producing source 

 # files to browse (i.e. when SOURCE_BROWSER is set to YES).

 FILTER_SOURCE_FILES    = NO

 #---------------------------------------------------------------------------

 # configuration options related to source browsing

 #---------------------------------------------------------------------------

 # If the SOURCE_BROWSER tag is set to YES then a list of source files will 

 # be generated. Documented entities will be cross-referenced with these sources. 

 # Note: To get rid of all source code in the generated output, make sure also 

 # VERBATIM_HEADERS is set to NO.

 SOURCE_BROWSER         = NO

 # Setting the INLINE_SOURCES tag to YES will include the body 

 # of functions and classes directly in the documentation.

 INLINE_SOURCES         = NO

 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 

 # doxygen to hide any special comment blocks from generated source code 

 # fragments. Normal C and C++ comments will always remain visible.

 STRIP_CODE_COMMENTS    = YES

 # If the REFERENCED_BY_RELATION tag is set to YES (the default) 

 # then for each documented function all documented 

 # functions referencing it will be listed.

 REFERENCED_BY_RELATION = NO

 # If the REFERENCES_RELATION tag is set to YES (the default) 

 # then for each documented function all documented entities 

 # called/used by that function will be listed.

 REFERENCES_RELATION    = NO

 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)

 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from

 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will

 # link to the source code.  Otherwise they will link to the documentstion.

 REFERENCES_LINK_SOURCE = NO

 # If the USE_HTAGS tag is set to YES then the references to source code 

 # will point to the HTML generated by the htags(1) tool instead of doxygen 

 # built-in source browser. The htags tool is part of GNU's global source 

 # tagging system (see http://www.gnu.org/software/global/global.html). You 

 # will need version 4.8.6 or higher.

 USE_HTAGS              = NO

 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 

 # will generate a verbatim copy of the header file for each class for 

 # which an include is specified. Set to NO to disable this.

 VERBATIM_HEADERS       = NO

 #---------------------------------------------------------------------------

 # configuration options related to the alphabetical class index

 #---------------------------------------------------------------------------

 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 

 # of all compounds will be generated. Enable this if the project 

 # contains a lot of classes, structs, unions or interfaces.

 ALPHABETICAL_INDEX     = YES

 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 

 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 

 # in which this list will be split (can be a number in the range [1..20])

 COLS_IN_ALPHA_INDEX    = 5

 # In case all classes in a project start with a common prefix, all 

 # classes will be put under the same header in the alphabetical index. 

 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that 

 # should be ignored while generating the index headers.

 IGNORE_PREFIX          = nsI ns \

                          mozI moz \

                          imgI img

 #---------------------------------------------------------------------------

 # configuration options related to the HTML output

 #---------------------------------------------------------------------------

 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will 

 # generate HTML output.

 GENERATE_HTML          = YES

 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 

 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 

 # put in front of it. If left blank `html' will be used as the default path.

 HTML_OUTPUT            = 

 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for 

 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank 

 # doxygen will generate files with .html extension.

 HTML_FILE_EXTENSION    = .html

 # The HTML_HEADER tag can be used to specify a personal HTML header for 

 # each generated HTML page. If it is left blank doxygen will generate a 

 # standard header.

 HTML_HEADER            = 

 # The HTML_FOOTER tag can be used to specify a personal HTML footer for 

 # each generated HTML page. If it is left blank doxygen will generate a 

 # standard footer.

 HTML_FOOTER            = 

 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading 

 # style sheet that is used by each HTML page. It can be used to 

 # fine-tune the look of the HTML output. If the tag is left blank doxygen 

 # will generate a default style sheet. Note that doxygen will try to copy 

 # the style sheet file to the HTML output directory, so don't put your own 

 # stylesheet in the HTML output directory as well, or it will be erased!

 HTML_STYLESHEET        = 

 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 

 # files or namespaces will be aligned in HTML using tables. If set to 

 # NO a bullet list will be used.

 HTML_ALIGN_MEMBERS     = YES

 # If the GENERATE_HTMLHELP tag is set to YES, additional index files 

 # will be generated that can be used as input for tools like the 

 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm) 

 # of the generated HTML documentation.

 GENERATE_HTMLHELP      = NO

 # If the GENERATE_DOCSET tag is set to YES, additional index files 

 # will be generated that can be used as input for Apple's Xcode 3 

 # integrated development environment, introduced with OSX 10.5 (Leopard). 

 # To create a documentation set, doxygen will generate a Makefile in the 

 # HTML output directory. Running make will produce the docset in that 

 # directory and running "make install" will install the docset in 

 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 

 # it at startup.

 GENERATE_DOCSET        = NO

 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the 

 # feed. A documentation feed provides an umbrella under which multiple 

 # documentation sets from a single provider (such as a company or product suite) 

 # can be grouped.

 DOCSET_FEEDNAME        = "Doxygen generated docs"

 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that 

 # should uniquely identify the documentation set bundle. This should be a 

 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen 

 # will append .docset to the name.

 DOCSET_BUNDLE_ID       = org.doxygen.Project

 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 

 # documentation will contain sections that can be hidden and shown after the 

 # page has loaded. For this to work a browser that supports 

 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 

 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).

 HTML_DYNAMIC_SECTIONS  = NO

 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 

 # be used to specify the file name of the resulting .chm file. You 

 # can add a path in front of the file if the result should not be 

 # written to the html output directory.

 CHM_FILE               = 

 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 

 # be used to specify the location (absolute path including file name) of 

 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 

 # the HTML help compiler on the generated index.hhp.

 HHC_LOCATION           = 

 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 

 # controls if a separate .chi index file is generated (YES) or that 

 # it should be included in the master .chm file (NO).

 GENERATE_CHI           = NO

 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 

 # controls whether a binary table of contents is generated (YES) or a 

 # normal table of contents (NO) in the .chm file.

 BINARY_TOC             = NO

 # The TOC_EXPAND flag can be set to YES to add extra items for group members 

 # to the contents of the HTML help documentation and to the tree view.

 TOC_EXPAND             = NO

 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at 

 # top of each HTML page. The value NO (the default) enables the index and 

 # the value YES disables it.

 DISABLE_INDEX          = NO

 # This tag can be used to set the number of enum values (range [1..20]) 

 # that doxygen will group on one line in the generated HTML documentation.

 ENUM_VALUES_PER_LINE   = 4

 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be

 # generated containing a tree-like index structure (just like the one that 

 # is generated for HTML Help). For this to work a browser that supports 

 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 

 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 

 # probably better off using the HTML help feature.

 GENERATE_TREEVIEW      = NO

 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 

 # used to set the initial width (in pixels) of the frame in which the tree 

 # is shown.

 TREEVIEW_WIDTH         = 250

 #---------------------------------------------------------------------------

 # configuration options related to the LaTeX output

 #---------------------------------------------------------------------------

 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 

 # generate Latex output.

 GENERATE_LATEX         = NO

 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 

 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 

 # put in front of it. If left blank `latex' will be used as the default path.

 LATEX_OUTPUT           = 

 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 

 # invoked. If left blank `latex' will be used as the default command name.

 LATEX_CMD_NAME         = latex

 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 

 # generate index for LaTeX. If left blank `makeindex' will be used as the 

 # default command name.

 MAKEINDEX_CMD_NAME     = makeindex

 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 

 # LaTeX documents. This may be useful for small projects and may help to 

 # save some trees in general.

 COMPACT_LATEX          = NO

 # The PAPER_TYPE tag can be used to set the paper type that is used 

 # by the printer. Possible values are: a4, a4wide, letter, legal and 

 # executive. If left blank a4wide will be used.

 PAPER_TYPE             = a4wide

 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 

 # packages that should be included in the LaTeX output.

 EXTRA_PACKAGES         = 

 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for 

 # the generated latex document. The header should contain everything until 

 # the first chapter. If it is left blank doxygen will generate a 

 # standard header. Notice: only use this tag if you know what you are doing!

 LATEX_HEADER           = 

 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 

 # is prepared for conversion to pdf (using ps2pdf). The pdf file will 

 # contain links (just like the HTML output) instead of page references 

 # This makes the output suitable for online browsing using a pdf viewer.

 PDF_HYPERLINKS         = NO

 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 

 # plain latex in the generated Makefile. Set this option to YES to get a 

 # higher quality PDF documentation.

 USE_PDFLATEX           = NO

 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 

 # command to the generated LaTeX files. This will instruct LaTeX to keep 

 # running if errors occur, instead of asking the user for help. 

 # This option is also used when generating formulas in HTML.

 LATEX_BATCHMODE        = NO

 # If LATEX_HIDE_INDICES is set to YES then doxygen will not 

 # include the index chapters (such as File Index, Compound Index, etc.) 

 # in the output.

 LATEX_HIDE_INDICES     = NO

 #---------------------------------------------------------------------------

 # configuration options related to the RTF output

 #---------------------------------------------------------------------------

 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 

 # The RTF output is optimized for Word 97 and may not look very pretty with 

 # other RTF readers or editors.

 GENERATE_RTF           = NO

 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 

 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 

 # put in front of it. If left blank `rtf' will be used as the default path.

 RTF_OUTPUT             = 

 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact 

 # RTF documents. This may be useful for small projects and may help to 

 # save some trees in general.

 COMPACT_RTF            = NO

 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 

 # will contain hyperlink fields. The RTF file will 

 # contain links (just like the HTML output) instead of page references. 

 # This makes the output suitable for online browsing using WORD or other 

 # programs which support those fields. 

 # Note: wordpad (write) and others do not support links.

 RTF_HYPERLINKS         = NO

 # Load stylesheet definitions from file. Syntax is similar to doxygen's 

 # config file, i.e. a series of assignments. You only have to provide 

 # replacements, missing definitions are set to their default value.

 RTF_STYLESHEET_FILE    = 

 # Set optional variables used in the generation of an rtf document. 

 # Syntax is similar to doxygen's config file.

 RTF_EXTENSIONS_FILE    = 

 #---------------------------------------------------------------------------

 # configuration options related to the man page output

 #---------------------------------------------------------------------------

 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will 

 # generate man pages

 GENERATE_MAN           = NO

 # The MAN_OUTPUT tag is used to specify where the man pages will be put. 

 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 

 # put in front of it. If left blank `man' will be used as the default path.

 MAN_OUTPUT             = 

 # The MAN_EXTENSION tag determines the extension that is added to 

 # the generated man pages (default is the subroutine's section .3)

 MAN_EXTENSION          = 

 # If the MAN_LINKS tag is set to YES and Doxygen generates man output, 

 # then it will generate one additional man file for each entity 

 # documented in the real man page(s). These additional files 

 # only source the real man page, but without them the man command 

 # would be unable to find the correct page. The default is NO.

 MAN_LINKS              = NO

 #---------------------------------------------------------------------------

 # configuration options related to the XML output

 #---------------------------------------------------------------------------

 # If the GENERATE_XML tag is set to YES Doxygen will 

 # generate an XML file that captures the structure of 

 # the code including all documentation.

 GENERATE_XML           = NO

 # The XML_OUTPUT tag is used to specify where the XML pages will be put. 

 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 

 # put in front of it. If left blank `xml' will be used as the default path.

 XML_OUTPUT             = xml

 # The XML_SCHEMA tag can be used to specify an XML schema, 

 # which can be used by a validating XML parser to check the 

 # syntax of the XML files.

 XML_SCHEMA             = 

 # The XML_DTD tag can be used to specify an XML DTD, 

 # which can be used by a validating XML parser to check the 

 # syntax of the XML files.

 XML_DTD                = 

 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will 

 # dump the program listings (including syntax highlighting 

 # and cross-referencing information) to the XML output. Note that 

 # enabling this will significantly increase the size of the XML output.

 XML_PROGRAMLISTING     = YES

 #---------------------------------------------------------------------------

 # configuration options for the AutoGen Definitions output

 #---------------------------------------------------------------------------

 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 

 # generate an AutoGen Definitions (see autogen.sf.net) file 

 # that captures the structure of the code including all 

 # documentation. Note that this feature is still experimental 

 # and incomplete at the moment.

 GENERATE_AUTOGEN_DEF   = NO

 #---------------------------------------------------------------------------

 # configuration options related to the Perl module output

 #---------------------------------------------------------------------------

 # If the GENERATE_PERLMOD tag is set to YES Doxygen will 

 # generate a Perl module file that captures the structure of 

 # the code including all documentation. Note that this 

 # feature is still experimental and incomplete at the 

 # moment.

 GENERATE_PERLMOD       = NO

 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate 

 # the necessary Makefile rules, Perl scripts and LaTeX code to be able 

 # to generate PDF and DVI output from the Perl module output.

 PERLMOD_LATEX          = NO

 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 

 # nicely formatted so it can be parsed by a human reader.  This is useful 

 # if you want to understand what is going on.  On the other hand, if this 

 # tag is set to NO the size of the Perl module output will be much smaller 

 # and Perl will parse it just the same.

 PERLMOD_PRETTY         = YES

 # The names of the make variables in the generated doxyrules.make file 

 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 

 # This is useful so different doxyrules.make files included by the same 

 # Makefile don't overwrite each other's variables.

 PERLMOD_MAKEVAR_PREFIX = 

 #---------------------------------------------------------------------------

 # Configuration options related to the preprocessor   

 #---------------------------------------------------------------------------

 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 

 # evaluate all C-preprocessor directives found in the sources and include 

 # files.

 ENABLE_PREPROCESSING   = YES

 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 

 # names in the source code. If set to NO (the default) only conditional 

 # compilation will be performed. Macro expansion can be done in a controlled 

 # way by setting EXPAND_ONLY_PREDEF to YES.

 MACRO_EXPANSION        = YES

 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 

 # then the macro expansion is limited to the macros specified with the 

 # PREDEFINED and EXPAND_AS_DEFINED tags.

 EXPAND_ONLY_PREDEF     = NO

 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 

 # in the INCLUDE_PATH (see below) will be search if a #include is found.

 SEARCH_INCLUDES        = YES

 # The INCLUDE_PATH tag can be used to specify one or more directories that 

 # contain include files that are not input files but should be processed by 

 # the preprocessor.

 INCLUDE_PATH           = @MOZ_DOC_INCLUDE_DIRS@

 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 

 # patterns (like *.h and *.hpp) to filter out the header-files in the 

 # directories. If left blank, the patterns specified with FILE_PATTERNS will 

 # be used.

 INCLUDE_FILE_PATTERNS  = *.h 

 # The PREDEFINED tag can be used to specify one or more macro names that 

 # are defined before the preprocessor is started (similar to the -D option of 

 # gcc). The argument of the tag is a list of macros of the form: name 

 # or name=definition (no spaces). If the definition and the = are 

 # omitted =1 is assumed. To prevent a macro definition from being 

 # undefined via #undef or recursively expanded use the := operator 

 # instead of the = operator.

 PREDEFINED             = 

 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 

 # this tag can be used to specify a list of macro names that should be expanded. 

 # The macro definition that is found in the sources will be used. 

 # Use the PREDEFINED tag if you want to use a different macro definition.

 EXPAND_AS_DEFINED      = 

 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 

 # doxygen's preprocessor will remove all function-like macros that are alone 

 # on a line, have an all uppercase name, and do not end with a semicolon. Such 

 # function macros are typically used for boiler-plate code, and will confuse 

 # the parser if not removed.

 SKIP_FUNCTION_MACROS   = YES

 #---------------------------------------------------------------------------

 # Configuration::additions related to external references   

 #---------------------------------------------------------------------------

 # The TAGFILES option can be used to specify one or more tagfiles. 

 # Optionally an initial location of the external documentation 

 # can be added for each tagfile. The format of a tag file without 

 # this location is as follows: 

 #   TAGFILES = file1 file2 ... 

 # Adding location for the tag files is done as follows: 

 #   TAGFILES = file1=loc1 "file2 = loc2" ... 

 # where "loc1" and "loc2" can be relative or absolute paths or 

 # URLs. If a location is present for each tag, the installdox tool 

 # does not have to be run to correct the links.

 # Note that each tag file must have a unique name

 # (where the name does NOT include the path)

 # If a tag file is not located in the directory in which doxygen 

 # is run, you must also specify the path to the tagfile here.

 TAGFILES               = 

 # When a file name is specified after GENERATE_TAGFILE, doxygen will create 

 # a tag file that is based on the input files it reads.

 GENERATE_TAGFILE       = 

 # If the ALLEXTERNALS tag is set to YES all external classes will be listed 

 # in the class index. If set to NO only the inherited external classes 

 # will be listed.

 ALLEXTERNALS           = NO

 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 

 # in the modules index. If set to NO, only the current project's groups will 

 # be listed.

 EXTERNAL_GROUPS        = YES

 # The PERL_PATH should be the absolute path and name of the perl script 

 # interpreter (i.e. the result of `which perl').

 PERL_PATH              = 

 #---------------------------------------------------------------------------

 # Configuration options related to the dot tool   

 #---------------------------------------------------------------------------

 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 

 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 

 # or super classes. Setting the tag to NO turns the diagrams off. Note that 

 # this option is superseded by the HAVE_DOT option below. This is only a 

 # fallback. It is recommended to install and use dot, since it yields more 

 # powerful graphs.

 CLASS_DIAGRAMS         = YES

 # You can define message sequence charts within doxygen comments using the \msc 

 # command. Doxygen will then run the mscgen tool (see 

 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the 

 # documentation. The MSCGEN_PATH tag allows you to specify the directory where 

 # the mscgen tool resides. If left empty the tool is assumed to be found in the 

 # default search path.

 MSCGEN_PATH            = 

 # If set to YES, the inheritance and collaboration graphs will hide 

 # inheritance and usage relations if the target is undocumented 

 # or is not a class.

 HIDE_UNDOC_RELATIONS   = YES

 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 

 # available from the path. This tool is part of Graphviz, a graph visualization 

 # toolkit from AT&T and Lucent Bell Labs. The other options in this section 

 # have no effect if this option is set to NO (the default)

 HAVE_DOT               = YES

 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 

 # will generate a graph for each documented class showing the direct and 

 # indirect inheritance relations. Setting this tag to YES will force the 

 # the CLASS_DIAGRAMS tag to NO.

 CLASS_GRAPH            = YES

 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 

 # will generate a graph for each documented class showing the direct and 

 # indirect implementation dependencies (inheritance, containment, and 

 # class references variables) of the class with other documented classes.

 COLLABORATION_GRAPH    = YES

 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 

 # will generate a graph for groups, showing the direct groups dependencies

 GROUP_GRAPHS           = YES

 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and 

 # collaboration diagrams in a style similar to the OMG's Unified Modeling 

 # Language.

 UML_LOOK               = NO

 # If set to YES, the inheritance and collaboration graphs will show the 

 # relations between templates and their instances.

 TEMPLATE_RELATIONS     = NO

 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 

 # tags are set to YES then doxygen will generate a graph for each documented 

 # file showing the direct and indirect include dependencies of the file with 

 # other documented files.

 INCLUDE_GRAPH          = YES

 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 

 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each 

 # documented header file showing the documented files that directly or 

 # indirectly include this file.

 INCLUDED_BY_GRAPH      = YES

 # If the CALL_GRAPH and HAVE_DOT options are set to YES then 

 # doxygen will generate a call dependency graph for every global function 

 # or class method. Note that enabling this option will significantly increase 

 # the time of a run. So in most cases it will be better to enable call graphs 

 # for selected functions only using the \callgraph command.

 CALL_GRAPH             = NO

 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then 

 # doxygen will generate a caller dependency graph for every global function 

 # or class method. Note that enabling this option will significantly increase 

 # the time of a run. So in most cases it will be better to enable caller 

 # graphs for selected functions only using the \callergraph command.

 CALLER_GRAPH           = NO

 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 

 # will graphical hierarchy of all classes instead of a textual one.

 GRAPHICAL_HIERARCHY    = YES

 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 

 # then doxygen will show the dependencies a directory has on other directories 

 # in a graphical way. The dependency relations are determined by the #include

 # relations between the files in the directories.

 DIRECTORY_GRAPH        = YES

 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 

 # generated by dot. Possible values are png, jpg, or gif

 # If left blank png will be used.

 DOT_IMAGE_FORMAT       = png

 # The tag DOT_PATH can be used to specify the path where the dot tool can be 

 # found. If left blank, it is assumed the dot tool can be found in the path.

 DOT_PATH               = 

 # The DOTFILE_DIRS tag can be used to specify one or more directories that 

 # contain dot files that are included in the documentation (see the 

 # \dotfile command).

 DOTFILE_DIRS           = 

 # The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 

 # nodes that will be shown in the graph. If the number of nodes in a graph 

 # becomes larger than this value, doxygen will truncate the graph, which is 

 # visualized by representing a node as a red box. Note that doxygen if the 

 # number of direct children of the root node in a graph is already larger than 

 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note 

 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

 DOT_GRAPH_MAX_NODES    = 50

 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 

 # graphs generated by dot. A depth value of 3 means that only nodes reachable 

 # from the root by following a path via at most 3 edges will be shown. Nodes 

 # that lay further from the root node will be omitted. Note that setting this 

 # option to 1 or 2 may greatly reduce the computation time needed for large 

 # code bases. Also note that the size of a graph can be further restricted by 

 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

 MAX_DOT_GRAPH_DEPTH    = 3

 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 

 # background. This is enabled by default, which results in a transparent 

 # background. Warning: Depending on the platform used, enabling this option 

 # may lead to badly anti-aliased labels on the edges of a graph (i.e. they 

 # become hard to read).

 DOT_TRANSPARENT        = YES

 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 

 # files in one run (i.e. multiple -o and -T options on the command line). This 

 # makes dot run faster, but since only newer versions of dot (>1.8.10) 

 # support this, this feature is disabled by default.

 DOT_MULTI_TARGETS      = NO

 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 

 # generate a legend page explaining the meaning of the various boxes and 

 # arrows in the dot generated graphs.

 GENERATE_LEGEND        = YES

 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 

 # remove the intermediate dot files that are used to generate 

 # the various graphs.

 DOT_CLEANUP            = YES

 #---------------------------------------------------------------------------

 # Configuration::additions related to the search engine   

 #---------------------------------------------------------------------------

 # The SEARCHENGINE tag specifies whether or not a search engine should be 

 # used. If set to NO the values of all tags below this one will be ignored.

 SEARCHENGINE           = NO