media/libopus/include/opus_defines.h@97036ab72558
media/libopus/include/opus_defines.h
Tue, 06 Jan 2015 21:39:09 +0100
- author
- Michael Schloh von Bennewitz <michael@schloh.com>
- date
- Tue, 06 Jan 2015 21:39:09 +0100
- branch
- TOR_BUG_9701
- changeset 8
- 97036ab72558
- permissions
- -rw-r--r--
Conditionally force memory storage according to privacy.thirdparty.isolate;
This solves Tor bug #9701, complying with disk avoidance documented in
https://www.torproject.org/projects/torbrowser/design/#disk-avoidance.
1 /* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited
2 Written by Jean-Marc Valin and Koen Vos */
3 /*
4 Redistribution and use in source and binary forms, with or without
5 modification, are permitted provided that the following conditions
6 are met:
8 - Redistributions of source code must retain the above copyright
9 notice, this list of conditions and the following disclaimer.
11 - Redistributions in binary form must reproduce the above copyright
12 notice, this list of conditions and the following disclaimer in the
13 documentation and/or other materials provided with the distribution.
15 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
16 ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
17 LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
18 A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
19 OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
20 EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
21 PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
22 PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
23 LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
24 NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
25 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 */
28 /**
29 * @file opus_defines.h
30 * @brief Opus reference implementation constants
31 */
33 #ifndef OPUS_DEFINES_H
34 #define OPUS_DEFINES_H
36 #include "opus_types.h"
38 #ifdef __cplusplus
39 extern "C" {
40 #endif
42 /** @defgroup opus_errorcodes Error codes
43 * @{
44 */
45 /** No error @hideinitializer*/
46 #define OPUS_OK 0
47 /** One or more invalid/out of range arguments @hideinitializer*/
48 #define OPUS_BAD_ARG -1
49 /** The mode struct passed is invalid @hideinitializer*/
50 #define OPUS_BUFFER_TOO_SMALL -2
51 /** An internal error was detected @hideinitializer*/
52 #define OPUS_INTERNAL_ERROR -3
53 /** The compressed data passed is corrupted @hideinitializer*/
54 #define OPUS_INVALID_PACKET -4
55 /** Invalid/unsupported request number @hideinitializer*/
56 #define OPUS_UNIMPLEMENTED -5
57 /** An encoder or decoder structure is invalid or already freed @hideinitializer*/
58 #define OPUS_INVALID_STATE -6
59 /** Memory allocation has failed @hideinitializer*/
60 #define OPUS_ALLOC_FAIL -7
61 /**@}*/
63 /** @cond OPUS_INTERNAL_DOC */
64 /**Export control for opus functions */
66 #ifndef OPUS_EXPORT
67 # if defined(WIN32)
68 # ifdef OPUS_BUILD
69 # define OPUS_EXPORT __declspec(dllexport)
70 # else
71 # define OPUS_EXPORT
72 # endif
73 # elif defined(__GNUC__) && defined(OPUS_BUILD)
74 # define OPUS_EXPORT __attribute__ ((visibility ("default")))
75 # else
76 # define OPUS_EXPORT
77 # endif
78 #endif
80 # if !defined(OPUS_GNUC_PREREQ)
81 # if defined(__GNUC__)&&defined(__GNUC_MINOR__)
82 # define OPUS_GNUC_PREREQ(_maj,_min) \
83 ((__GNUC__<<16)+__GNUC_MINOR__>=((_maj)<<16)+(_min))
84 # else
85 # define OPUS_GNUC_PREREQ(_maj,_min) 0
86 # endif
87 # endif
89 #if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) )
90 # if OPUS_GNUC_PREREQ(3,0)
91 # define OPUS_RESTRICT __restrict__
92 # elif (defined(_MSC_VER) && _MSC_VER >= 1400)
93 # define OPUS_RESTRICT __restrict
94 # else
95 # define OPUS_RESTRICT
96 # endif
97 #else
98 # define OPUS_RESTRICT restrict
99 #endif
101 #if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) )
102 # if OPUS_GNUC_PREREQ(2,7)
103 # define OPUS_INLINE __inline__
104 # elif (defined(_MSC_VER))
105 # define OPUS_INLINE __inline
106 # else
107 # define OPUS_INLINE
108 # endif
109 #else
110 # define OPUS_INLINE inline
111 #endif
113 /**Warning attributes for opus functions
114 * NONNULL is not used in OPUS_BUILD to avoid the compiler optimizing out
115 * some paranoid null checks. */
116 #if defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4)
117 # define OPUS_WARN_UNUSED_RESULT __attribute__ ((__warn_unused_result__))
118 #else
119 # define OPUS_WARN_UNUSED_RESULT
120 #endif
121 #if !defined(OPUS_BUILD) && defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4)
122 # define OPUS_ARG_NONNULL(_x) __attribute__ ((__nonnull__(_x)))
123 #else
124 # define OPUS_ARG_NONNULL(_x)
125 #endif
127 /** These are the actual Encoder CTL ID numbers.
128 * They should not be used directly by applications.
129 * In general, SETs should be even and GETs should be odd.*/
130 #define OPUS_SET_APPLICATION_REQUEST 4000
131 #define OPUS_GET_APPLICATION_REQUEST 4001
132 #define OPUS_SET_BITRATE_REQUEST 4002
133 #define OPUS_GET_BITRATE_REQUEST 4003
134 #define OPUS_SET_MAX_BANDWIDTH_REQUEST 4004
135 #define OPUS_GET_MAX_BANDWIDTH_REQUEST 4005
136 #define OPUS_SET_VBR_REQUEST 4006
137 #define OPUS_GET_VBR_REQUEST 4007
138 #define OPUS_SET_BANDWIDTH_REQUEST 4008
139 #define OPUS_GET_BANDWIDTH_REQUEST 4009
140 #define OPUS_SET_COMPLEXITY_REQUEST 4010
141 #define OPUS_GET_COMPLEXITY_REQUEST 4011
142 #define OPUS_SET_INBAND_FEC_REQUEST 4012
143 #define OPUS_GET_INBAND_FEC_REQUEST 4013
144 #define OPUS_SET_PACKET_LOSS_PERC_REQUEST 4014
145 #define OPUS_GET_PACKET_LOSS_PERC_REQUEST 4015
146 #define OPUS_SET_DTX_REQUEST 4016
147 #define OPUS_GET_DTX_REQUEST 4017
148 #define OPUS_SET_VBR_CONSTRAINT_REQUEST 4020
149 #define OPUS_GET_VBR_CONSTRAINT_REQUEST 4021
150 #define OPUS_SET_FORCE_CHANNELS_REQUEST 4022
151 #define OPUS_GET_FORCE_CHANNELS_REQUEST 4023
152 #define OPUS_SET_SIGNAL_REQUEST 4024
153 #define OPUS_GET_SIGNAL_REQUEST 4025
154 #define OPUS_GET_LOOKAHEAD_REQUEST 4027
155 /* #define OPUS_RESET_STATE 4028 */
156 #define OPUS_GET_SAMPLE_RATE_REQUEST 4029
157 #define OPUS_GET_FINAL_RANGE_REQUEST 4031
158 #define OPUS_GET_PITCH_REQUEST 4033
159 #define OPUS_SET_GAIN_REQUEST 4034
160 #define OPUS_GET_GAIN_REQUEST 4045 /* Should have been 4035 */
161 #define OPUS_SET_LSB_DEPTH_REQUEST 4036
162 #define OPUS_GET_LSB_DEPTH_REQUEST 4037
163 #define OPUS_GET_LAST_PACKET_DURATION_REQUEST 4039
164 #define OPUS_SET_EXPERT_FRAME_DURATION_REQUEST 4040
165 #define OPUS_GET_EXPERT_FRAME_DURATION_REQUEST 4041
166 #define OPUS_SET_PREDICTION_DISABLED_REQUEST 4042
167 #define OPUS_GET_PREDICTION_DISABLED_REQUEST 4043
169 /* Don't use 4045, it's already taken by OPUS_GET_GAIN_REQUEST */
171 /* Macros to trigger compilation errors when the wrong types are provided to a CTL */
172 #define __opus_check_int(x) (((void)((x) == (opus_int32)0)), (opus_int32)(x))
173 #define __opus_check_int_ptr(ptr) ((ptr) + ((ptr) - (opus_int32*)(ptr)))
174 #define __opus_check_uint_ptr(ptr) ((ptr) + ((ptr) - (opus_uint32*)(ptr)))
175 #define __opus_check_val16_ptr(ptr) ((ptr) + ((ptr) - (opus_val16*)(ptr)))
176 /** @endcond */
178 /** @defgroup opus_ctlvalues Pre-defined values for CTL interface
179 * @see opus_genericctls, opus_encoderctls
180 * @{
181 */
182 /* Values for the various encoder CTLs */
183 #define OPUS_AUTO -1000 /**<Auto/default setting @hideinitializer*/
184 #define OPUS_BITRATE_MAX -1 /**<Maximum bitrate @hideinitializer*/
186 /** Best for most VoIP/videoconference applications where listening quality and intelligibility matter most
187 * @hideinitializer */
188 #define OPUS_APPLICATION_VOIP 2048
189 /** Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input
190 * @hideinitializer */
191 #define OPUS_APPLICATION_AUDIO 2049
192 /** Only use when lowest-achievable latency is what matters most. Voice-optimized modes cannot be used.
193 * @hideinitializer */
194 #define OPUS_APPLICATION_RESTRICTED_LOWDELAY 2051
196 #define OPUS_SIGNAL_VOICE 3001 /**< Signal being encoded is voice */
197 #define OPUS_SIGNAL_MUSIC 3002 /**< Signal being encoded is music */
198 #define OPUS_BANDWIDTH_NARROWBAND 1101 /**< 4 kHz bandpass @hideinitializer*/
199 #define OPUS_BANDWIDTH_MEDIUMBAND 1102 /**< 6 kHz bandpass @hideinitializer*/
200 #define OPUS_BANDWIDTH_WIDEBAND 1103 /**< 8 kHz bandpass @hideinitializer*/
201 #define OPUS_BANDWIDTH_SUPERWIDEBAND 1104 /**<12 kHz bandpass @hideinitializer*/
202 #define OPUS_BANDWIDTH_FULLBAND 1105 /**<20 kHz bandpass @hideinitializer*/
204 #define OPUS_FRAMESIZE_ARG 5000 /**< Select frame size from the argument (default) */
205 #define OPUS_FRAMESIZE_2_5_MS 5001 /**< Use 2.5 ms frames */
206 #define OPUS_FRAMESIZE_5_MS 5002 /**< Use 5 ms frames */
207 #define OPUS_FRAMESIZE_10_MS 5003 /**< Use 10 ms frames */
208 #define OPUS_FRAMESIZE_20_MS 5004 /**< Use 20 ms frames */
209 #define OPUS_FRAMESIZE_40_MS 5005 /**< Use 40 ms frames */
210 #define OPUS_FRAMESIZE_60_MS 5006 /**< Use 60 ms frames */
212 /**@}*/
215 /** @defgroup opus_encoderctls Encoder related CTLs
216 *
217 * These are convenience macros for use with the \c opus_encode_ctl
218 * interface. They are used to generate the appropriate series of
219 * arguments for that call, passing the correct type, size and so
220 * on as expected for each particular request.
221 *
222 * Some usage examples:
223 *
224 * @code
225 * int ret;
226 * ret = opus_encoder_ctl(enc_ctx, OPUS_SET_BANDWIDTH(OPUS_AUTO));
227 * if (ret != OPUS_OK) return ret;
228 *
229 * opus_int32 rate;
230 * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&rate));
231 *
232 * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE);
233 * @endcode
234 *
235 * @see opus_genericctls, opus_encoder
236 * @{
237 */
239 /** Configures the encoder's computational complexity.
240 * The supported range is 0-10 inclusive with 10 representing the highest complexity.
241 * @see OPUS_GET_COMPLEXITY
242 * @param[in] x <tt>opus_int32</tt>: Allowed values: 0-10, inclusive.
243 *
244 * @hideinitializer */
245 #define OPUS_SET_COMPLEXITY(x) OPUS_SET_COMPLEXITY_REQUEST, __opus_check_int(x)
246 /** Gets the encoder's complexity configuration.
247 * @see OPUS_SET_COMPLEXITY
248 * @param[out] x <tt>opus_int32 *</tt>: Returns a value in the range 0-10,
249 * inclusive.
250 * @hideinitializer */
251 #define OPUS_GET_COMPLEXITY(x) OPUS_GET_COMPLEXITY_REQUEST, __opus_check_int_ptr(x)
253 /** Configures the bitrate in the encoder.
254 * Rates from 500 to 512000 bits per second are meaningful, as well as the
255 * special values #OPUS_AUTO and #OPUS_BITRATE_MAX.
256 * The value #OPUS_BITRATE_MAX can be used to cause the codec to use as much
257 * rate as it can, which is useful for controlling the rate by adjusting the
258 * output buffer size.
259 * @see OPUS_GET_BITRATE
260 * @param[in] x <tt>opus_int32</tt>: Bitrate in bits per second. The default
261 * is determined based on the number of
262 * channels and the input sampling rate.
263 * @hideinitializer */
264 #define OPUS_SET_BITRATE(x) OPUS_SET_BITRATE_REQUEST, __opus_check_int(x)
265 /** Gets the encoder's bitrate configuration.
266 * @see OPUS_SET_BITRATE
267 * @param[out] x <tt>opus_int32 *</tt>: Returns the bitrate in bits per second.
268 * The default is determined based on the
269 * number of channels and the input
270 * sampling rate.
271 * @hideinitializer */
272 #define OPUS_GET_BITRATE(x) OPUS_GET_BITRATE_REQUEST, __opus_check_int_ptr(x)
274 /** Enables or disables variable bitrate (VBR) in the encoder.
275 * The configured bitrate may not be met exactly because frames must
276 * be an integer number of bytes in length.
277 * @warning Only the MDCT mode of Opus can provide hard CBR behavior.
278 * @see OPUS_GET_VBR
279 * @see OPUS_SET_VBR_CONSTRAINT
280 * @param[in] x <tt>opus_int32</tt>: Allowed values:
281 * <dl>
282 * <dt>0</dt><dd>Hard CBR. For LPC/hybrid modes at very low bit-rate, this can
283 * cause noticeable quality degradation.</dd>
284 * <dt>1</dt><dd>VBR (default). The exact type of VBR is controlled by
285 * #OPUS_SET_VBR_CONSTRAINT.</dd>
286 * </dl>
287 * @hideinitializer */
288 #define OPUS_SET_VBR(x) OPUS_SET_VBR_REQUEST, __opus_check_int(x)
289 /** Determine if variable bitrate (VBR) is enabled in the encoder.
290 * @see OPUS_SET_VBR
291 * @see OPUS_GET_VBR_CONSTRAINT
292 * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
293 * <dl>
294 * <dt>0</dt><dd>Hard CBR.</dd>
295 * <dt>1</dt><dd>VBR (default). The exact type of VBR may be retrieved via
296 * #OPUS_GET_VBR_CONSTRAINT.</dd>
297 * </dl>
298 * @hideinitializer */
299 #define OPUS_GET_VBR(x) OPUS_GET_VBR_REQUEST, __opus_check_int_ptr(x)
301 /** Enables or disables constrained VBR in the encoder.
302 * This setting is ignored when the encoder is in CBR mode.
303 * @warning Only the MDCT mode of Opus currently heeds the constraint.
304 * Speech mode ignores it completely, hybrid mode may fail to obey it
305 * if the LPC layer uses more bitrate than the constraint would have
306 * permitted.
307 * @see OPUS_GET_VBR_CONSTRAINT
308 * @see OPUS_SET_VBR
309 * @param[in] x <tt>opus_int32</tt>: Allowed values:
310 * <dl>
311 * <dt>0</dt><dd>Unconstrained VBR.</dd>
312 * <dt>1</dt><dd>Constrained VBR (default). This creates a maximum of one
313 * frame of buffering delay assuming a transport with a
314 * serialization speed of the nominal bitrate.</dd>
315 * </dl>
316 * @hideinitializer */
317 #define OPUS_SET_VBR_CONSTRAINT(x) OPUS_SET_VBR_CONSTRAINT_REQUEST, __opus_check_int(x)
318 /** Determine if constrained VBR is enabled in the encoder.
319 * @see OPUS_SET_VBR_CONSTRAINT
320 * @see OPUS_GET_VBR
321 * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
322 * <dl>
323 * <dt>0</dt><dd>Unconstrained VBR.</dd>
324 * <dt>1</dt><dd>Constrained VBR (default).</dd>
325 * </dl>
326 * @hideinitializer */
327 #define OPUS_GET_VBR_CONSTRAINT(x) OPUS_GET_VBR_CONSTRAINT_REQUEST, __opus_check_int_ptr(x)
329 /** Configures mono/stereo forcing in the encoder.
330 * This can force the encoder to produce packets encoded as either mono or
331 * stereo, regardless of the format of the input audio. This is useful when
332 * the caller knows that the input signal is currently a mono source embedded
333 * in a stereo stream.
334 * @see OPUS_GET_FORCE_CHANNELS
335 * @param[in] x <tt>opus_int32</tt>: Allowed values:
336 * <dl>
337 * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd>
338 * <dt>1</dt> <dd>Forced mono</dd>
339 * <dt>2</dt> <dd>Forced stereo</dd>
340 * </dl>
341 * @hideinitializer */
342 #define OPUS_SET_FORCE_CHANNELS(x) OPUS_SET_FORCE_CHANNELS_REQUEST, __opus_check_int(x)
343 /** Gets the encoder's forced channel configuration.
344 * @see OPUS_SET_FORCE_CHANNELS
345 * @param[out] x <tt>opus_int32 *</tt>:
346 * <dl>
347 * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd>
348 * <dt>1</dt> <dd>Forced mono</dd>
349 * <dt>2</dt> <dd>Forced stereo</dd>
350 * </dl>
351 * @hideinitializer */
352 #define OPUS_GET_FORCE_CHANNELS(x) OPUS_GET_FORCE_CHANNELS_REQUEST, __opus_check_int_ptr(x)
354 /** Configures the maximum bandpass that the encoder will select automatically.
355 * Applications should normally use this instead of #OPUS_SET_BANDWIDTH
356 * (leaving that set to the default, #OPUS_AUTO). This allows the
357 * application to set an upper bound based on the type of input it is
358 * providing, but still gives the encoder the freedom to reduce the bandpass
359 * when the bitrate becomes too low, for better overall quality.
360 * @see OPUS_GET_MAX_BANDWIDTH
361 * @param[in] x <tt>opus_int32</tt>: Allowed values:
362 * <dl>
363 * <dt>OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd>
364 * <dt>OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd>
365 * <dt>OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd>
366 * <dt>OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
367 * <dt>OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband (default)</dd>
368 * </dl>
369 * @hideinitializer */
370 #define OPUS_SET_MAX_BANDWIDTH(x) OPUS_SET_MAX_BANDWIDTH_REQUEST, __opus_check_int(x)
372 /** Gets the encoder's configured maximum allowed bandpass.
373 * @see OPUS_SET_MAX_BANDWIDTH
374 * @param[out] x <tt>opus_int32 *</tt>: Allowed values:
375 * <dl>
376 * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd>
377 * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd>
378 * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd>
379 * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
380 * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband (default)</dd>
381 * </dl>
382 * @hideinitializer */
383 #define OPUS_GET_MAX_BANDWIDTH(x) OPUS_GET_MAX_BANDWIDTH_REQUEST, __opus_check_int_ptr(x)
385 /** Sets the encoder's bandpass to a specific value.
386 * This prevents the encoder from automatically selecting the bandpass based
387 * on the available bitrate. If an application knows the bandpass of the input
388 * audio it is providing, it should normally use #OPUS_SET_MAX_BANDWIDTH
389 * instead, which still gives the encoder the freedom to reduce the bandpass
390 * when the bitrate becomes too low, for better overall quality.
391 * @see OPUS_GET_BANDWIDTH
392 * @param[in] x <tt>opus_int32</tt>: Allowed values:
393 * <dl>
394 * <dt>#OPUS_AUTO</dt> <dd>(default)</dd>
395 * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd>
396 * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd>
397 * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd>
398 * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
399 * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband</dd>
400 * </dl>
401 * @hideinitializer */
402 #define OPUS_SET_BANDWIDTH(x) OPUS_SET_BANDWIDTH_REQUEST, __opus_check_int(x)
404 /** Configures the type of signal being encoded.
405 * This is a hint which helps the encoder's mode selection.
406 * @see OPUS_GET_SIGNAL
407 * @param[in] x <tt>opus_int32</tt>: Allowed values:
408 * <dl>
409 * <dt>#OPUS_AUTO</dt> <dd>(default)</dd>
410 * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd>
411 * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd>
412 * </dl>
413 * @hideinitializer */
414 #define OPUS_SET_SIGNAL(x) OPUS_SET_SIGNAL_REQUEST, __opus_check_int(x)
415 /** Gets the encoder's configured signal type.
416 * @see OPUS_SET_SIGNAL
417 * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
418 * <dl>
419 * <dt>#OPUS_AUTO</dt> <dd>(default)</dd>
420 * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd>
421 * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd>
422 * </dl>
423 * @hideinitializer */
424 #define OPUS_GET_SIGNAL(x) OPUS_GET_SIGNAL_REQUEST, __opus_check_int_ptr(x)
427 /** Configures the encoder's intended application.
428 * The initial value is a mandatory argument to the encoder_create function.
429 * @see OPUS_GET_APPLICATION
430 * @param[in] x <tt>opus_int32</tt>: Returns one of the following values:
431 * <dl>
432 * <dt>#OPUS_APPLICATION_VOIP</dt>
433 * <dd>Process signal for improved speech intelligibility.</dd>
434 * <dt>#OPUS_APPLICATION_AUDIO</dt>
435 * <dd>Favor faithfulness to the original input.</dd>
436 * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
437 * <dd>Configure the minimum possible coding delay by disabling certain modes
438 * of operation.</dd>
439 * </dl>
440 * @hideinitializer */
441 #define OPUS_SET_APPLICATION(x) OPUS_SET_APPLICATION_REQUEST, __opus_check_int(x)
442 /** Gets the encoder's configured application.
443 * @see OPUS_SET_APPLICATION
444 * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
445 * <dl>
446 * <dt>#OPUS_APPLICATION_VOIP</dt>
447 * <dd>Process signal for improved speech intelligibility.</dd>
448 * <dt>#OPUS_APPLICATION_AUDIO</dt>
449 * <dd>Favor faithfulness to the original input.</dd>
450 * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
451 * <dd>Configure the minimum possible coding delay by disabling certain modes
452 * of operation.</dd>
453 * </dl>
454 * @hideinitializer */
455 #define OPUS_GET_APPLICATION(x) OPUS_GET_APPLICATION_REQUEST, __opus_check_int_ptr(x)
457 /** Gets the sampling rate the encoder or decoder was initialized with.
458 * This simply returns the <code>Fs</code> value passed to opus_encoder_init()
459 * or opus_decoder_init().
460 * @param[out] x <tt>opus_int32 *</tt>: Sampling rate of encoder or decoder.
461 * @hideinitializer
462 */
463 #define OPUS_GET_SAMPLE_RATE(x) OPUS_GET_SAMPLE_RATE_REQUEST, __opus_check_int_ptr(x)
465 /** Gets the total samples of delay added by the entire codec.
466 * This can be queried by the encoder and then the provided number of samples can be
467 * skipped on from the start of the decoder's output to provide time aligned input
468 * and output. From the perspective of a decoding application the real data begins this many
469 * samples late.
470 *
471 * The decoder contribution to this delay is identical for all decoders, but the
472 * encoder portion of the delay may vary from implementation to implementation,
473 * version to version, or even depend on the encoder's initial configuration.
474 * Applications needing delay compensation should call this CTL rather than
475 * hard-coding a value.
476 * @param[out] x <tt>opus_int32 *</tt>: Number of lookahead samples
477 * @hideinitializer */
478 #define OPUS_GET_LOOKAHEAD(x) OPUS_GET_LOOKAHEAD_REQUEST, __opus_check_int_ptr(x)
480 /** Configures the encoder's use of inband forward error correction (FEC).
481 * @note This is only applicable to the LPC layer
482 * @see OPUS_GET_INBAND_FEC
483 * @param[in] x <tt>opus_int32</tt>: Allowed values:
484 * <dl>
485 * <dt>0</dt><dd>Disable inband FEC (default).</dd>
486 * <dt>1</dt><dd>Enable inband FEC.</dd>
487 * </dl>
488 * @hideinitializer */
489 #define OPUS_SET_INBAND_FEC(x) OPUS_SET_INBAND_FEC_REQUEST, __opus_check_int(x)
490 /** Gets encoder's configured use of inband forward error correction.
491 * @see OPUS_SET_INBAND_FEC
492 * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
493 * <dl>
494 * <dt>0</dt><dd>Inband FEC disabled (default).</dd>
495 * <dt>1</dt><dd>Inband FEC enabled.</dd>
496 * </dl>
497 * @hideinitializer */
498 #define OPUS_GET_INBAND_FEC(x) OPUS_GET_INBAND_FEC_REQUEST, __opus_check_int_ptr(x)
500 /** Configures the encoder's expected packet loss percentage.
501 * Higher values with trigger progressively more loss resistant behavior in the encoder
502 * at the expense of quality at a given bitrate in the lossless case, but greater quality
503 * under loss.
504 * @see OPUS_GET_PACKET_LOSS_PERC
505 * @param[in] x <tt>opus_int32</tt>: Loss percentage in the range 0-100, inclusive (default: 0).
506 * @hideinitializer */
507 #define OPUS_SET_PACKET_LOSS_PERC(x) OPUS_SET_PACKET_LOSS_PERC_REQUEST, __opus_check_int(x)
508 /** Gets the encoder's configured packet loss percentage.
509 * @see OPUS_SET_PACKET_LOSS_PERC
510 * @param[out] x <tt>opus_int32 *</tt>: Returns the configured loss percentage
511 * in the range 0-100, inclusive (default: 0).
512 * @hideinitializer */
513 #define OPUS_GET_PACKET_LOSS_PERC(x) OPUS_GET_PACKET_LOSS_PERC_REQUEST, __opus_check_int_ptr(x)
515 /** Configures the encoder's use of discontinuous transmission (DTX).
516 * @note This is only applicable to the LPC layer
517 * @see OPUS_GET_DTX
518 * @param[in] x <tt>opus_int32</tt>: Allowed values:
519 * <dl>
520 * <dt>0</dt><dd>Disable DTX (default).</dd>
521 * <dt>1</dt><dd>Enabled DTX.</dd>
522 * </dl>
523 * @hideinitializer */
524 #define OPUS_SET_DTX(x) OPUS_SET_DTX_REQUEST, __opus_check_int(x)
525 /** Gets encoder's configured use of discontinuous transmission.
526 * @see OPUS_SET_DTX
527 * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
528 * <dl>
529 * <dt>0</dt><dd>DTX disabled (default).</dd>
530 * <dt>1</dt><dd>DTX enabled.</dd>
531 * </dl>
532 * @hideinitializer */
533 #define OPUS_GET_DTX(x) OPUS_GET_DTX_REQUEST, __opus_check_int_ptr(x)
534 /** Configures the depth of signal being encoded.
535 * This is a hint which helps the encoder identify silence and near-silence.
536 * @see OPUS_GET_LSB_DEPTH
537 * @param[in] x <tt>opus_int32</tt>: Input precision in bits, between 8 and 24
538 * (default: 24).
539 * @hideinitializer */
540 #define OPUS_SET_LSB_DEPTH(x) OPUS_SET_LSB_DEPTH_REQUEST, __opus_check_int(x)
541 /** Gets the encoder's configured signal depth.
542 * @see OPUS_SET_LSB_DEPTH
543 * @param[out] x <tt>opus_int32 *</tt>: Input precision in bits, between 8 and
544 * 24 (default: 24).
545 * @hideinitializer */
546 #define OPUS_GET_LSB_DEPTH(x) OPUS_GET_LSB_DEPTH_REQUEST, __opus_check_int_ptr(x)
548 /** Gets the duration (in samples) of the last packet successfully decoded or concealed.
549 * @param[out] x <tt>opus_int32 *</tt>: Number of samples (at current sampling rate).
550 * @hideinitializer */
551 #define OPUS_GET_LAST_PACKET_DURATION(x) OPUS_GET_LAST_PACKET_DURATION_REQUEST, __opus_check_int_ptr(x)
553 /** Configures the encoder's use of variable duration frames.
554 * When variable duration is enabled, the encoder is free to use a shorter frame
555 * size than the one requested in the opus_encode*() call.
556 * It is then the user's responsibility
557 * to verify how much audio was encoded by checking the ToC byte of the encoded
558 * packet. The part of the audio that was not encoded needs to be resent to the
559 * encoder for the next call. Do not use this option unless you <b>really</b>
560 * know what you are doing.
561 * @see OPUS_GET_EXPERT_VARIABLE_DURATION
562 * @param[in] x <tt>opus_int32</tt>: Allowed values:
563 * <dl>
564 * <dt>OPUS_FRAMESIZE_ARG</dt><dd>Select frame size from the argument (default).</dd>
565 * <dt>OPUS_FRAMESIZE_2_5_MS</dt><dd>Use 2.5 ms frames.</dd>
566 * <dt>OPUS_FRAMESIZE_5_MS</dt><dd>Use 2.5 ms frames.</dd>
567 * <dt>OPUS_FRAMESIZE_10_MS</dt><dd>Use 10 ms frames.</dd>
568 * <dt>OPUS_FRAMESIZE_20_MS</dt><dd>Use 20 ms frames.</dd>
569 * <dt>OPUS_FRAMESIZE_40_MS</dt><dd>Use 40 ms frames.</dd>
570 * <dt>OPUS_FRAMESIZE_60_MS</dt><dd>Use 60 ms frames.</dd>
571 * <dt>OPUS_FRAMESIZE_VARIABLE</dt><dd>Optimize the frame size dynamically.</dd>
572 * </dl>
573 * @hideinitializer */
574 #define OPUS_SET_EXPERT_FRAME_DURATION(x) OPUS_SET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int(x)
575 /** Gets the encoder's configured use of variable duration frames.
576 * @see OPUS_SET_EXPERT_VARIABLE_DURATION
577 * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
578 * <dl>
579 * <dt>OPUS_FRAMESIZE_ARG</dt><dd>Select frame size from the argument (default).</dd>
580 * <dt>OPUS_FRAMESIZE_2_5_MS</dt><dd>Use 2.5 ms frames.</dd>
581 * <dt>OPUS_FRAMESIZE_5_MS</dt><dd>Use 2.5 ms frames.</dd>
582 * <dt>OPUS_FRAMESIZE_10_MS</dt><dd>Use 10 ms frames.</dd>
583 * <dt>OPUS_FRAMESIZE_20_MS</dt><dd>Use 20 ms frames.</dd>
584 * <dt>OPUS_FRAMESIZE_40_MS</dt><dd>Use 40 ms frames.</dd>
585 * <dt>OPUS_FRAMESIZE_60_MS</dt><dd>Use 60 ms frames.</dd>
586 * <dt>OPUS_FRAMESIZE_VARIABLE</dt><dd>Optimize the frame size dynamically.</dd>
587 * </dl>
588 * @hideinitializer */
589 #define OPUS_GET_EXPERT_FRAME_DURATION(x) OPUS_GET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int_ptr(x)
591 /** If set to 1, disables almost all use of prediction, making frames almost
592 completely independent. This reduces quality. (default : 0)
593 * @hideinitializer */
594 #define OPUS_SET_PREDICTION_DISABLED(x) OPUS_SET_PREDICTION_DISABLED_REQUEST, __opus_check_int(x)
595 /** Gets the encoder's configured prediction status.
596 * @hideinitializer */
597 #define OPUS_GET_PREDICTION_DISABLED(x) OPUS_GET_PREDICTION_DISABLED_REQUEST, __opus_check_int_ptr(x)
599 /**@}*/
601 /** @defgroup opus_genericctls Generic CTLs
602 *
603 * These macros are used with the \c opus_decoder_ctl and
604 * \c opus_encoder_ctl calls to generate a particular
605 * request.
606 *
607 * When called on an \c OpusDecoder they apply to that
608 * particular decoder instance. When called on an
609 * \c OpusEncoder they apply to the corresponding setting
610 * on that encoder instance, if present.
611 *
612 * Some usage examples:
613 *
614 * @code
615 * int ret;
616 * opus_int32 pitch;
617 * ret = opus_decoder_ctl(dec_ctx, OPUS_GET_PITCH(&pitch));
618 * if (ret == OPUS_OK) return ret;
619 *
620 * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE);
621 * opus_decoder_ctl(dec_ctx, OPUS_RESET_STATE);
622 *
623 * opus_int32 enc_bw, dec_bw;
624 * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&enc_bw));
625 * opus_decoder_ctl(dec_ctx, OPUS_GET_BANDWIDTH(&dec_bw));
626 * if (enc_bw != dec_bw) {
627 * printf("packet bandwidth mismatch!\n");
628 * }
629 * @endcode
630 *
631 * @see opus_encoder, opus_decoder_ctl, opus_encoder_ctl, opus_decoderctls, opus_encoderctls
632 * @{
633 */
635 /** Resets the codec state to be equivalent to a freshly initialized state.
636 * This should be called when switching streams in order to prevent
637 * the back to back decoding from giving different results from
638 * one at a time decoding.
639 * @hideinitializer */
640 #define OPUS_RESET_STATE 4028
642 /** Gets the final state of the codec's entropy coder.
643 * This is used for testing purposes,
644 * The encoder and decoder state should be identical after coding a payload
645 * (assuming no data corruption or software bugs)
646 *
647 * @param[out] x <tt>opus_uint32 *</tt>: Entropy coder state
648 *
649 * @hideinitializer */
650 #define OPUS_GET_FINAL_RANGE(x) OPUS_GET_FINAL_RANGE_REQUEST, __opus_check_uint_ptr(x)
652 /** Gets the pitch of the last decoded frame, if available.
653 * This can be used for any post-processing algorithm requiring the use of pitch,
654 * e.g. time stretching/shortening. If the last frame was not voiced, or if the
655 * pitch was not coded in the frame, then zero is returned.
656 *
657 * This CTL is only implemented for decoder instances.
658 *
659 * @param[out] x <tt>opus_int32 *</tt>: pitch period at 48 kHz (or 0 if not available)
660 *
661 * @hideinitializer */
662 #define OPUS_GET_PITCH(x) OPUS_GET_PITCH_REQUEST, __opus_check_int_ptr(x)
664 /** Gets the encoder's configured bandpass or the decoder's last bandpass.
665 * @see OPUS_SET_BANDWIDTH
666 * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
667 * <dl>
668 * <dt>#OPUS_AUTO</dt> <dd>(default)</dd>
669 * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd>
670 * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd>
671 * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd>
672 * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
673 * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband</dd>
674 * </dl>
675 * @hideinitializer */
676 #define OPUS_GET_BANDWIDTH(x) OPUS_GET_BANDWIDTH_REQUEST, __opus_check_int_ptr(x)
678 /**@}*/
680 /** @defgroup opus_decoderctls Decoder related CTLs
681 * @see opus_genericctls, opus_encoderctls, opus_decoder
682 * @{
683 */
685 /** Configures decoder gain adjustment.
686 * Scales the decoded output by a factor specified in Q8 dB units.
687 * This has a maximum range of -32768 to 32767 inclusive, and returns
688 * OPUS_BAD_ARG otherwise. The default is zero indicating no adjustment.
689 * This setting survives decoder reset.
690 *
691 * gain = pow(10, x/(20.0*256))
692 *
693 * @param[in] x <tt>opus_int32</tt>: Amount to scale PCM signal by in Q8 dB units.
694 * @hideinitializer */
695 #define OPUS_SET_GAIN(x) OPUS_SET_GAIN_REQUEST, __opus_check_int(x)
696 /** Gets the decoder's configured gain adjustment. @see OPUS_SET_GAIN
697 *
698 * @param[out] x <tt>opus_int32 *</tt>: Amount to scale PCM signal by in Q8 dB units.
699 * @hideinitializer */
700 #define OPUS_GET_GAIN(x) OPUS_GET_GAIN_REQUEST, __opus_check_int_ptr(x)
702 /**@}*/
704 /** @defgroup opus_libinfo Opus library information functions
705 * @{
706 */
708 /** Converts an opus error code into a human readable string.
709 *
710 * @param[in] error <tt>int</tt>: Error number
711 * @returns Error string
712 */
713 OPUS_EXPORT const char *opus_strerror(int error);
715 /** Gets the libopus version string.
716 *
717 * @returns Version string
718 */
719 OPUS_EXPORT const char *opus_get_version_string(void);
720 /**@}*/
722 #ifdef __cplusplus
723 }
724 #endif
726 #endif /* OPUS_DEFINES_H */
