michael@0: /* Copyright (c) 2011 Xiph.Org Foundation
michael@0:    Written by Jean-Marc Valin */
michael@0: /*
michael@0:    Redistribution and use in source and binary forms, with or without
michael@0:    modification, are permitted provided that the following conditions
michael@0:    are met:
michael@0: 
michael@0:    - Redistributions of source code must retain the above copyright
michael@0:    notice, this list of conditions and the following disclaimer.
michael@0: 
michael@0:    - Redistributions in binary form must reproduce the above copyright
michael@0:    notice, this list of conditions and the following disclaimer in the
michael@0:    documentation and/or other materials provided with the distribution.
michael@0: 
michael@0:    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
michael@0:    ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
michael@0:    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
michael@0:    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
michael@0:    OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
michael@0:    EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
michael@0:    PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
michael@0:    PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
michael@0:    LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
michael@0:    NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
michael@0:    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
michael@0: */
michael@0: 
michael@0: /**
michael@0:  * @file opus_multistream.h
michael@0:  * @brief Opus reference implementation multistream API
michael@0:  */
michael@0: 
michael@0: #ifndef OPUS_MULTISTREAM_H
michael@0: #define OPUS_MULTISTREAM_H
michael@0: 
michael@0: #include "opus.h"
michael@0: 
michael@0: #ifdef __cplusplus
michael@0: extern "C" {
michael@0: #endif
michael@0: 
michael@0: /** @cond OPUS_INTERNAL_DOC */
michael@0: 
michael@0: /** Macros to trigger compilation errors when the wrong types are provided to a
michael@0:   * CTL. */
michael@0: /**@{*/
michael@0: #define __opus_check_encstate_ptr(ptr) ((ptr) + ((ptr) - (OpusEncoder**)(ptr)))
michael@0: #define __opus_check_decstate_ptr(ptr) ((ptr) + ((ptr) - (OpusDecoder**)(ptr)))
michael@0: /**@}*/
michael@0: 
michael@0: /** These are the actual encoder and decoder CTL ID numbers.
michael@0:   * They should not be used directly by applications.
michael@0:   * In general, SETs should be even and GETs should be odd.*/
michael@0: /**@{*/
michael@0: #define OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST 5120
michael@0: #define OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST 5122
michael@0: /**@}*/
michael@0: 
michael@0: /** @endcond */
michael@0: 
michael@0: /** @defgroup opus_multistream_ctls Multistream specific encoder and decoder CTLs
michael@0:   *
michael@0:   * These are convenience macros that are specific to the
michael@0:   * opus_multistream_encoder_ctl() and opus_multistream_decoder_ctl()
michael@0:   * interface.
michael@0:   * The CTLs from @ref opus_genericctls, @ref opus_encoderctls, and
michael@0:   * @ref opus_decoderctls may be applied to a multistream encoder or decoder as
michael@0:   * well.
michael@0:   * In addition, you may retrieve the encoder or decoder state for an specific
michael@0:   * stream via #OPUS_MULTISTREAM_GET_ENCODER_STATE or
michael@0:   * #OPUS_MULTISTREAM_GET_DECODER_STATE and apply CTLs to it individually.
michael@0:   */
michael@0: /**@{*/
michael@0: 
michael@0: /** Gets the encoder state for an individual stream of a multistream encoder.
michael@0:   * @param[in] x <tt>opus_int32</tt>: The index of the stream whose encoder you
michael@0:   *                                   wish to retrieve.
michael@0:   *                                   This must be non-negative and less than
michael@0:   *                                   the <code>streams</code> parameter used
michael@0:   *                                   to initialize the encoder.
michael@0:   * @param[out] y <tt>OpusEncoder**</tt>: Returns a pointer to the given
michael@0:   *                                       encoder state.
michael@0:   * @retval OPUS_BAD_ARG The index of the requested stream was out of range.
michael@0:   * @hideinitializer
michael@0:   */
michael@0: #define OPUS_MULTISTREAM_GET_ENCODER_STATE(x,y) OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST, __opus_check_int(x), __opus_check_encstate_ptr(y)
michael@0: 
michael@0: /** Gets the decoder state for an individual stream of a multistream decoder.
michael@0:   * @param[in] x <tt>opus_int32</tt>: The index of the stream whose decoder you
michael@0:   *                                   wish to retrieve.
michael@0:   *                                   This must be non-negative and less than
michael@0:   *                                   the <code>streams</code> parameter used
michael@0:   *                                   to initialize the decoder.
michael@0:   * @param[out] y <tt>OpusDecoder**</tt>: Returns a pointer to the given
michael@0:   *                                       decoder state.
michael@0:   * @retval OPUS_BAD_ARG The index of the requested stream was out of range.
michael@0:   * @hideinitializer
michael@0:   */
michael@0: #define OPUS_MULTISTREAM_GET_DECODER_STATE(x,y) OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST, __opus_check_int(x), __opus_check_decstate_ptr(y)
michael@0: 
michael@0: /**@}*/
michael@0: 
michael@0: /** @defgroup opus_multistream Opus Multistream API
michael@0:   * @{
michael@0:   *
michael@0:   * The multistream API allows individual Opus streams to be combined into a
michael@0:   * single packet, enabling support for up to 255 channels. Unlike an
michael@0:   * elementary Opus stream, the encoder and decoder must negotiate the channel
michael@0:   * configuration before the decoder can successfully interpret the data in the
michael@0:   * packets produced by the encoder. Some basic information, such as packet
michael@0:   * duration, can be computed without any special negotiation.
michael@0:   *
michael@0:   * The format for multistream Opus packets is defined in the
michael@0:   * <a href="http://tools.ietf.org/html/draft-terriberry-oggopus">Ogg
michael@0:   * encapsulation specification</a> and is based on the self-delimited Opus
michael@0:   * framing described in Appendix B of <a href="http://tools.ietf.org/html/rfc6716">RFC 6716</a>.
michael@0:   * Normal Opus packets are just a degenerate case of multistream Opus packets,
michael@0:   * and can be encoded or decoded with the multistream API by setting
michael@0:   * <code>streams</code> to <code>1</code> when initializing the encoder or
michael@0:   * decoder.
michael@0:   *
michael@0:   * Multistream Opus streams can contain up to 255 elementary Opus streams.
michael@0:   * These may be either "uncoupled" or "coupled", indicating that the decoder
michael@0:   * is configured to decode them to either 1 or 2 channels, respectively.
michael@0:   * The streams are ordered so that all coupled streams appear at the
michael@0:   * beginning.
michael@0:   *
michael@0:   * A <code>mapping</code> table defines which decoded channel <code>i</code>
michael@0:   * should be used for each input/output (I/O) channel <code>j</code>. This table is
michael@0:   * typically provided as an unsigned char array.
michael@0:   * Let <code>i = mapping[j]</code> be the index for I/O channel <code>j</code>.
michael@0:   * If <code>i < 2*coupled_streams</code>, then I/O channel <code>j</code> is
michael@0:   * encoded as the left channel of stream <code>(i/2)</code> if <code>i</code>
michael@0:   * is even, or  as the right channel of stream <code>(i/2)</code> if
michael@0:   * <code>i</code> is odd. Otherwise, I/O channel <code>j</code> is encoded as
michael@0:   * mono in stream <code>(i - coupled_streams)</code>, unless it has the special
michael@0:   * value 255, in which case it is omitted from the encoding entirely (the
michael@0:   * decoder will reproduce it as silence). Each value <code>i</code> must either
michael@0:   * be the special value 255 or be less than <code>streams + coupled_streams</code>.
michael@0:   *
michael@0:   * The output channels specified by the encoder
michael@0:   * should use the
michael@0:   * <a href="http://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-800004.3.9">Vorbis
michael@0:   * channel ordering</a>. A decoder may wish to apply an additional permutation
michael@0:   * to the mapping the encoder used to achieve a different output channel
michael@0:   * order (e.g. for outputing in WAV order).
michael@0:   *
michael@0:   * Each multistream packet contains an Opus packet for each stream, and all of
michael@0:   * the Opus packets in a single multistream packet must have the same
michael@0:   * duration. Therefore the duration of a multistream packet can be extracted
michael@0:   * from the TOC sequence of the first stream, which is located at the
michael@0:   * beginning of the packet, just like an elementary Opus stream:
michael@0:   *
michael@0:   * @code
michael@0:   * int nb_samples;
michael@0:   * int nb_frames;
michael@0:   * nb_frames = opus_packet_get_nb_frames(data, len);
michael@0:   * if (nb_frames < 1)
michael@0:   *   return nb_frames;
michael@0:   * nb_samples = opus_packet_get_samples_per_frame(data, 48000) * nb_frames;
michael@0:   * @endcode
michael@0:   *
michael@0:   * The general encoding and decoding process proceeds exactly the same as in
michael@0:   * the normal @ref opus_encoder and @ref opus_decoder APIs.
michael@0:   * See their documentation for an overview of how to use the corresponding
michael@0:   * multistream functions.
michael@0:   */
michael@0: 
michael@0: /** Opus multistream encoder state.
michael@0:   * This contains the complete state of a multistream Opus encoder.
michael@0:   * It is position independent and can be freely copied.
michael@0:   * @see opus_multistream_encoder_create
michael@0:   * @see opus_multistream_encoder_init
michael@0:   */
michael@0: typedef struct OpusMSEncoder OpusMSEncoder;
michael@0: 
michael@0: /** Opus multistream decoder state.
michael@0:   * This contains the complete state of a multistream Opus decoder.
michael@0:   * It is position independent and can be freely copied.
michael@0:   * @see opus_multistream_decoder_create
michael@0:   * @see opus_multistream_decoder_init
michael@0:   */
michael@0: typedef struct OpusMSDecoder OpusMSDecoder;
michael@0: 
michael@0: /**\name Multistream encoder functions */
michael@0: /**@{*/
michael@0: 
michael@0: /** Gets the size of an OpusMSEncoder structure.
michael@0:   * @param streams <tt>int</tt>: The total number of streams to encode from the
michael@0:   *                              input.
michael@0:   *                              This must be no more than 255.
michael@0:   * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
michael@0:   *                                      to encode.
michael@0:   *                                      This must be no larger than the total
michael@0:   *                                      number of streams.
michael@0:   *                                      Additionally, The total number of
michael@0:   *                                      encoded channels (<code>streams +
michael@0:   *                                      coupled_streams</code>) must be no
michael@0:   *                                      more than 255.
michael@0:   * @returns The size in bytes on success, or a negative error code
michael@0:   *          (see @ref opus_errorcodes) on error.
michael@0:   */
michael@0: OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_encoder_get_size(
michael@0:       int streams,
michael@0:       int coupled_streams
michael@0: );
michael@0: 
michael@0: OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_surround_encoder_get_size(
michael@0:       int channels,
michael@0:       int mapping_family
michael@0: );
michael@0: 
michael@0: 
michael@0: /** Allocates and initializes a multistream encoder state.
michael@0:   * Call opus_multistream_encoder_destroy() to release
michael@0:   * this object when finished.
michael@0:   * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
michael@0:   *                                This must be one of 8000, 12000, 16000,
michael@0:   *                                24000, or 48000.
michael@0:   * @param channels <tt>int</tt>: Number of channels in the input signal.
michael@0:   *                               This must be at most 255.
michael@0:   *                               It may be greater than the number of
michael@0:   *                               coded channels (<code>streams +
michael@0:   *                               coupled_streams</code>).
michael@0:   * @param streams <tt>int</tt>: The total number of streams to encode from the
michael@0:   *                              input.
michael@0:   *                              This must be no more than the number of channels.
michael@0:   * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
michael@0:   *                                      to encode.
michael@0:   *                                      This must be no larger than the total
michael@0:   *                                      number of streams.
michael@0:   *                                      Additionally, The total number of
michael@0:   *                                      encoded channels (<code>streams +
michael@0:   *                                      coupled_streams</code>) must be no
michael@0:   *                                      more than the number of input channels.
michael@0:   * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
michael@0:   *                    encoded channels to input channels, as described in
michael@0:   *                    @ref opus_multistream. As an extra constraint, the
michael@0:   *                    multistream encoder does not allow encoding coupled
michael@0:   *                    streams for which one channel is unused since this
michael@0:   *                    is never a good idea.
michael@0:   * @param application <tt>int</tt>: The target encoder application.
michael@0:   *                                  This must be one of the following:
michael@0:   * <dl>
michael@0:   * <dt>#OPUS_APPLICATION_VOIP</dt>
michael@0:   * <dd>Process signal for improved speech intelligibility.</dd>
michael@0:   * <dt>#OPUS_APPLICATION_AUDIO</dt>
michael@0:   * <dd>Favor faithfulness to the original input.</dd>
michael@0:   * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
michael@0:   * <dd>Configure the minimum possible coding delay by disabling certain modes
michael@0:   * of operation.</dd>
michael@0:   * </dl>
michael@0:   * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
michael@0:   *                                   code (see @ref opus_errorcodes) on
michael@0:   *                                   failure.
michael@0:   */
michael@0: OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_encoder_create(
michael@0:       opus_int32 Fs,
michael@0:       int channels,
michael@0:       int streams,
michael@0:       int coupled_streams,
michael@0:       const unsigned char *mapping,
michael@0:       int application,
michael@0:       int *error
michael@0: ) OPUS_ARG_NONNULL(5);
michael@0: 
michael@0: OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_surround_encoder_create(
michael@0:       opus_int32 Fs,
michael@0:       int channels,
michael@0:       int mapping_family,
michael@0:       int *streams,
michael@0:       int *coupled_streams,
michael@0:       unsigned char *mapping,
michael@0:       int application,
michael@0:       int *error
michael@0: ) OPUS_ARG_NONNULL(5);
michael@0: 
michael@0: /** Initialize a previously allocated multistream encoder state.
michael@0:   * The memory pointed to by \a st must be at least the size returned by
michael@0:   * opus_multistream_encoder_get_size().
michael@0:   * This is intended for applications which use their own allocator instead of
michael@0:   * malloc.
michael@0:   * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
michael@0:   * @see opus_multistream_encoder_create
michael@0:   * @see opus_multistream_encoder_get_size
michael@0:   * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize.
michael@0:   * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
michael@0:   *                                This must be one of 8000, 12000, 16000,
michael@0:   *                                24000, or 48000.
michael@0:   * @param channels <tt>int</tt>: Number of channels in the input signal.
michael@0:   *                               This must be at most 255.
michael@0:   *                               It may be greater than the number of
michael@0:   *                               coded channels (<code>streams +
michael@0:   *                               coupled_streams</code>).
michael@0:   * @param streams <tt>int</tt>: The total number of streams to encode from the
michael@0:   *                              input.
michael@0:   *                              This must be no more than the number of channels.
michael@0:   * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
michael@0:   *                                      to encode.
michael@0:   *                                      This must be no larger than the total
michael@0:   *                                      number of streams.
michael@0:   *                                      Additionally, The total number of
michael@0:   *                                      encoded channels (<code>streams +
michael@0:   *                                      coupled_streams</code>) must be no
michael@0:   *                                      more than the number of input channels.
michael@0:   * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
michael@0:   *                    encoded channels to input channels, as described in
michael@0:   *                    @ref opus_multistream. As an extra constraint, the
michael@0:   *                    multistream encoder does not allow encoding coupled
michael@0:   *                    streams for which one channel is unused since this
michael@0:   *                    is never a good idea.
michael@0:   * @param application <tt>int</tt>: The target encoder application.
michael@0:   *                                  This must be one of the following:
michael@0:   * <dl>
michael@0:   * <dt>#OPUS_APPLICATION_VOIP</dt>
michael@0:   * <dd>Process signal for improved speech intelligibility.</dd>
michael@0:   * <dt>#OPUS_APPLICATION_AUDIO</dt>
michael@0:   * <dd>Favor faithfulness to the original input.</dd>
michael@0:   * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
michael@0:   * <dd>Configure the minimum possible coding delay by disabling certain modes
michael@0:   * of operation.</dd>
michael@0:   * </dl>
michael@0:   * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
michael@0:   *          on failure.
michael@0:   */
michael@0: OPUS_EXPORT int opus_multistream_encoder_init(
michael@0:       OpusMSEncoder *st,
michael@0:       opus_int32 Fs,
michael@0:       int channels,
michael@0:       int streams,
michael@0:       int coupled_streams,
michael@0:       const unsigned char *mapping,
michael@0:       int application
michael@0: ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
michael@0: 
michael@0: OPUS_EXPORT int opus_multistream_surround_encoder_init(
michael@0:       OpusMSEncoder *st,
michael@0:       opus_int32 Fs,
michael@0:       int channels,
michael@0:       int mapping_family,
michael@0:       int *streams,
michael@0:       int *coupled_streams,
michael@0:       unsigned char *mapping,
michael@0:       int application
michael@0: ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
michael@0: 
michael@0: /** Encodes a multistream Opus frame.
michael@0:   * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
michael@0:   * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved
michael@0:   *                                            samples.
michael@0:   *                                            This must contain
michael@0:   *                                            <code>frame_size*channels</code>
michael@0:   *                                            samples.
michael@0:   * @param frame_size <tt>int</tt>: Number of samples per channel in the input
michael@0:   *                                 signal.
michael@0:   *                                 This must be an Opus frame size for the
michael@0:   *                                 encoder's sampling rate.
michael@0:   *                                 For example, at 48 kHz the permitted values
michael@0:   *                                 are 120, 240, 480, 960, 1920, and 2880.
michael@0:   *                                 Passing in a duration of less than 10 ms
michael@0:   *                                 (480 samples at 48 kHz) will prevent the
michael@0:   *                                 encoder from using the LPC or hybrid modes.
michael@0:   * @param[out] data <tt>unsigned char*</tt>: Output payload.
michael@0:   *                                           This must contain storage for at
michael@0:   *                                           least \a max_data_bytes.
michael@0:   * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
michael@0:   *                                                 memory for the output
michael@0:   *                                                 payload. This may be
michael@0:   *                                                 used to impose an upper limit on
michael@0:   *                                                 the instant bitrate, but should
michael@0:   *                                                 not be used as the only bitrate
michael@0:   *                                                 control. Use #OPUS_SET_BITRATE to
michael@0:   *                                                 control the bitrate.
michael@0:   * @returns The length of the encoded packet (in bytes) on success or a
michael@0:   *          negative error code (see @ref opus_errorcodes) on failure.
michael@0:   */
michael@0: OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode(
michael@0:     OpusMSEncoder *st,
michael@0:     const opus_int16 *pcm,
michael@0:     int frame_size,
michael@0:     unsigned char *data,
michael@0:     opus_int32 max_data_bytes
michael@0: ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
michael@0: 
michael@0: /** Encodes a multistream Opus frame from floating point input.
michael@0:   * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
michael@0:   * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved
michael@0:   *                                       samples with a normal range of
michael@0:   *                                       +/-1.0.
michael@0:   *                                       Samples with a range beyond +/-1.0
michael@0:   *                                       are supported but will be clipped by
michael@0:   *                                       decoders using the integer API and
michael@0:   *                                       should only be used if it is known
michael@0:   *                                       that the far end supports extended
michael@0:   *                                       dynamic range.
michael@0:   *                                       This must contain
michael@0:   *                                       <code>frame_size*channels</code>
michael@0:   *                                       samples.
michael@0:   * @param frame_size <tt>int</tt>: Number of samples per channel in the input
michael@0:   *                                 signal.
michael@0:   *                                 This must be an Opus frame size for the
michael@0:   *                                 encoder's sampling rate.
michael@0:   *                                 For example, at 48 kHz the permitted values
michael@0:   *                                 are 120, 240, 480, 960, 1920, and 2880.
michael@0:   *                                 Passing in a duration of less than 10 ms
michael@0:   *                                 (480 samples at 48 kHz) will prevent the
michael@0:   *                                 encoder from using the LPC or hybrid modes.
michael@0:   * @param[out] data <tt>unsigned char*</tt>: Output payload.
michael@0:   *                                           This must contain storage for at
michael@0:   *                                           least \a max_data_bytes.
michael@0:   * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
michael@0:   *                                                 memory for the output
michael@0:   *                                                 payload. This may be
michael@0:   *                                                 used to impose an upper limit on
michael@0:   *                                                 the instant bitrate, but should
michael@0:   *                                                 not be used as the only bitrate
michael@0:   *                                                 control. Use #OPUS_SET_BITRATE to
michael@0:   *                                                 control the bitrate.
michael@0:   * @returns The length of the encoded packet (in bytes) on success or a
michael@0:   *          negative error code (see @ref opus_errorcodes) on failure.
michael@0:   */
michael@0: OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode_float(
michael@0:       OpusMSEncoder *st,
michael@0:       const float *pcm,
michael@0:       int frame_size,
michael@0:       unsigned char *data,
michael@0:       opus_int32 max_data_bytes
michael@0: ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
michael@0: 
michael@0: /** Frees an <code>OpusMSEncoder</code> allocated by
michael@0:   * opus_multistream_encoder_create().
michael@0:   * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to be freed.
michael@0:   */
michael@0: OPUS_EXPORT void opus_multistream_encoder_destroy(OpusMSEncoder *st);
michael@0: 
michael@0: /** Perform a CTL function on a multistream Opus encoder.
michael@0:   *
michael@0:   * Generally the request and subsequent arguments are generated by a
michael@0:   * convenience macro.
michael@0:   * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
michael@0:   * @param request This and all remaining parameters should be replaced by one
michael@0:   *                of the convenience macros in @ref opus_genericctls,
michael@0:   *                @ref opus_encoderctls, or @ref opus_multistream_ctls.
michael@0:   * @see opus_genericctls
michael@0:   * @see opus_encoderctls
michael@0:   * @see opus_multistream_ctls
michael@0:   */
michael@0: OPUS_EXPORT int opus_multistream_encoder_ctl(OpusMSEncoder *st, int request, ...) OPUS_ARG_NONNULL(1);
michael@0: 
michael@0: /**@}*/
michael@0: 
michael@0: /**\name Multistream decoder functions */
michael@0: /**@{*/
michael@0: 
michael@0: /** Gets the size of an <code>OpusMSDecoder</code> structure.
michael@0:   * @param streams <tt>int</tt>: The total number of streams coded in the
michael@0:   *                              input.
michael@0:   *                              This must be no more than 255.
michael@0:   * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled
michael@0:   *                                      (2 channel) streams.
michael@0:   *                                      This must be no larger than the total
michael@0:   *                                      number of streams.
michael@0:   *                                      Additionally, The total number of
michael@0:   *                                      coded channels (<code>streams +
michael@0:   *                                      coupled_streams</code>) must be no
michael@0:   *                                      more than 255.
michael@0:   * @returns The size in bytes on success, or a negative error code
michael@0:   *          (see @ref opus_errorcodes) on error.
michael@0:   */
michael@0: OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_decoder_get_size(
michael@0:       int streams,
michael@0:       int coupled_streams
michael@0: );
michael@0: 
michael@0: /** Allocates and initializes a multistream decoder state.
michael@0:   * Call opus_multistream_decoder_destroy() to release
michael@0:   * this object when finished.
michael@0:   * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
michael@0:   *                                This must be one of 8000, 12000, 16000,
michael@0:   *                                24000, or 48000.
michael@0:   * @param channels <tt>int</tt>: Number of channels to output.
michael@0:   *                               This must be at most 255.
michael@0:   *                               It may be different from the number of coded
michael@0:   *                               channels (<code>streams +
michael@0:   *                               coupled_streams</code>).
michael@0:   * @param streams <tt>int</tt>: The total number of streams coded in the
michael@0:   *                              input.
michael@0:   *                              This must be no more than 255.
michael@0:   * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
michael@0:   *                                      (2 channel) streams.
michael@0:   *                                      This must be no larger than the total
michael@0:   *                                      number of streams.
michael@0:   *                                      Additionally, The total number of
michael@0:   *                                      coded channels (<code>streams +
michael@0:   *                                      coupled_streams</code>) must be no
michael@0:   *                                      more than 255.
michael@0:   * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
michael@0:   *                    coded channels to output channels, as described in
michael@0:   *                    @ref opus_multistream.
michael@0:   * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
michael@0:   *                                   code (see @ref opus_errorcodes) on
michael@0:   *                                   failure.
michael@0:   */
michael@0: OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSDecoder *opus_multistream_decoder_create(
michael@0:       opus_int32 Fs,
michael@0:       int channels,
michael@0:       int streams,
michael@0:       int coupled_streams,
michael@0:       const unsigned char *mapping,
michael@0:       int *error
michael@0: ) OPUS_ARG_NONNULL(5);
michael@0: 
michael@0: /** Intialize a previously allocated decoder state object.
michael@0:   * The memory pointed to by \a st must be at least the size returned by
michael@0:   * opus_multistream_encoder_get_size().
michael@0:   * This is intended for applications which use their own allocator instead of
michael@0:   * malloc.
michael@0:   * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
michael@0:   * @see opus_multistream_decoder_create
michael@0:   * @see opus_multistream_deocder_get_size
michael@0:   * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize.
michael@0:   * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
michael@0:   *                                This must be one of 8000, 12000, 16000,
michael@0:   *                                24000, or 48000.
michael@0:   * @param channels <tt>int</tt>: Number of channels to output.
michael@0:   *                               This must be at most 255.
michael@0:   *                               It may be different from the number of coded
michael@0:   *                               channels (<code>streams +
michael@0:   *                               coupled_streams</code>).
michael@0:   * @param streams <tt>int</tt>: The total number of streams coded in the
michael@0:   *                              input.
michael@0:   *                              This must be no more than 255.
michael@0:   * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
michael@0:   *                                      (2 channel) streams.
michael@0:   *                                      This must be no larger than the total
michael@0:   *                                      number of streams.
michael@0:   *                                      Additionally, The total number of
michael@0:   *                                      coded channels (<code>streams +
michael@0:   *                                      coupled_streams</code>) must be no
michael@0:   *                                      more than 255.
michael@0:   * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
michael@0:   *                    coded channels to output channels, as described in
michael@0:   *                    @ref opus_multistream.
michael@0:   * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
michael@0:   *          on failure.
michael@0:   */
michael@0: OPUS_EXPORT int opus_multistream_decoder_init(
michael@0:       OpusMSDecoder *st,
michael@0:       opus_int32 Fs,
michael@0:       int channels,
michael@0:       int streams,
michael@0:       int coupled_streams,
michael@0:       const unsigned char *mapping
michael@0: ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
michael@0: 
michael@0: /** Decode a multistream Opus packet.
michael@0:   * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
michael@0:   * @param[in] data <tt>const unsigned char*</tt>: Input payload.
michael@0:   *                                                Use a <code>NULL</code>
michael@0:   *                                                pointer to indicate packet
michael@0:   *                                                loss.
michael@0:   * @param len <tt>opus_int32</tt>: Number of bytes in payload.
michael@0:   * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
michael@0:   *                                       samples.
michael@0:   *                                       This must contain room for
michael@0:   *                                       <code>frame_size*channels</code>
michael@0:   *                                       samples.
michael@0:   * @param frame_size <tt>int</tt>: The number of samples per channel of
michael@0:   *                                 available space in \a pcm.
michael@0:   *                                 If this is less than the maximum packet duration
michael@0:   *                                 (120 ms; 5760 for 48kHz), this function will not be capable
michael@0:   *                                 of decoding some packets. In the case of PLC (data==NULL)
michael@0:   *                                 or FEC (decode_fec=1), then frame_size needs to be exactly
michael@0:   *                                 the duration of audio that is missing, otherwise the
michael@0:   *                                 decoder will not be in the optimal state to decode the
michael@0:   *                                 next incoming packet. For the PLC and FEC cases, frame_size
michael@0:   *                                 <b>must</b> be a multiple of 2.5 ms.
michael@0:   * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
michael@0:   *                                 forward error correction data be decoded.
michael@0:   *                                 If no such data is available, the frame is
michael@0:   *                                 decoded as if it were lost.
michael@0:   * @returns Number of samples decoded on success or a negative error code
michael@0:   *          (see @ref opus_errorcodes) on failure.
michael@0:   */
michael@0: OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode(
michael@0:     OpusMSDecoder *st,
michael@0:     const unsigned char *data,
michael@0:     opus_int32 len,
michael@0:     opus_int16 *pcm,
michael@0:     int frame_size,
michael@0:     int decode_fec
michael@0: ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
michael@0: 
michael@0: /** Decode a multistream Opus packet with floating point output.
michael@0:   * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
michael@0:   * @param[in] data <tt>const unsigned char*</tt>: Input payload.
michael@0:   *                                                Use a <code>NULL</code>
michael@0:   *                                                pointer to indicate packet
michael@0:   *                                                loss.
michael@0:   * @param len <tt>opus_int32</tt>: Number of bytes in payload.
michael@0:   * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
michael@0:   *                                       samples.
michael@0:   *                                       This must contain room for
michael@0:   *                                       <code>frame_size*channels</code>
michael@0:   *                                       samples.
michael@0:   * @param frame_size <tt>int</tt>: The number of samples per channel of
michael@0:   *                                 available space in \a pcm.
michael@0:   *                                 If this is less than the maximum packet duration
michael@0:   *                                 (120 ms; 5760 for 48kHz), this function will not be capable
michael@0:   *                                 of decoding some packets. In the case of PLC (data==NULL)
michael@0:   *                                 or FEC (decode_fec=1), then frame_size needs to be exactly
michael@0:   *                                 the duration of audio that is missing, otherwise the
michael@0:   *                                 decoder will not be in the optimal state to decode the
michael@0:   *                                 next incoming packet. For the PLC and FEC cases, frame_size
michael@0:   *                                 <b>must</b> be a multiple of 2.5 ms.
michael@0:   * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
michael@0:   *                                 forward error correction data be decoded.
michael@0:   *                                 If no such data is available, the frame is
michael@0:   *                                 decoded as if it were lost.
michael@0:   * @returns Number of samples decoded on success or a negative error code
michael@0:   *          (see @ref opus_errorcodes) on failure.
michael@0:   */
michael@0: OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode_float(
michael@0:     OpusMSDecoder *st,
michael@0:     const unsigned char *data,
michael@0:     opus_int32 len,
michael@0:     float *pcm,
michael@0:     int frame_size,
michael@0:     int decode_fec
michael@0: ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
michael@0: 
michael@0: /** Perform a CTL function on a multistream Opus decoder.
michael@0:   *
michael@0:   * Generally the request and subsequent arguments are generated by a
michael@0:   * convenience macro.
michael@0:   * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
michael@0:   * @param request This and all remaining parameters should be replaced by one
michael@0:   *                of the convenience macros in @ref opus_genericctls,
michael@0:   *                @ref opus_decoderctls, or @ref opus_multistream_ctls.
michael@0:   * @see opus_genericctls
michael@0:   * @see opus_decoderctls
michael@0:   * @see opus_multistream_ctls
michael@0:   */
michael@0: OPUS_EXPORT int opus_multistream_decoder_ctl(OpusMSDecoder *st, int request, ...) OPUS_ARG_NONNULL(1);
michael@0: 
michael@0: /** Frees an <code>OpusMSDecoder</code> allocated by
michael@0:   * opus_multistream_decoder_create().
michael@0:   * @param st <tt>OpusMSDecoder</tt>: Multistream decoder state to be freed.
michael@0:   */
michael@0: OPUS_EXPORT void opus_multistream_decoder_destroy(OpusMSDecoder *st);
michael@0: 
michael@0: /**@}*/
michael@0: 
michael@0: /**@}*/
michael@0: 
michael@0: #ifdef __cplusplus
michael@0: }
michael@0: #endif
michael@0: 
michael@0: #endif /* OPUS_MULTISTREAM_H */