OpenPKG Specs: asterisk/rpt.conf@acad5c9dea5f (annotated)

asterisk/rpt.conf@acad5c9dea5f (annotated)

asterisk/rpt.conf

Fri, 22 Oct 2010 19:54:57 +0200

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Fri, 22 Oct 2010 19:54:57 +0200
changeset 281: acad5c9dea5f
permissions: -rw-r--r--

Correct dependencies and use a canonical package name.

 ; Radio Repeater / Remote Base configuration file (for use with app_rpt)
 ; As of app_rpt version 0.39, 12/20/2005
 ;
 ;[000]					; Node ID of first repeater
 ;rxchannel = Zap/1			; Rx audio/signalling channel
 ; Note: if you use a unified interface (tx/rx on one channel), only
 ; specify the rxchannel and the txchannel will be assumed from the rxchannel
 ;txchannel = Zap/2			; Tx audio/signalling channel
 ;duplex = 2				; (Optional) set duplex operating mode
 ;; 0 = half duplex (telemetry and courtesy tones do not transmit)
 ;; 1 = semi-half duplex (telemetry and courtesy tones transmit, but not
 ;;    repeated audio
 ;; 2 = normal full-duplex mode (Default)
 ;; 3 = full-duplex mode, without repeated audio from main input source
 ;functions = functions-repeater		; DTMF function list
 ;; specify this for a different function list then local when on link
 ;;link_functions = functions-different	; DTMF function list for link
 ;;phone_functions = functions-phone	; (optional) different functions for 'P' mode
 ;;dphone_functions = functions-dphone	; (optional) different functions for 'D' mode
 ;;nodes = nodes-different		; (optional) different node list
 ;tonezone = us				; use US tones (default)
 ;context = default			; dialing context for phone
 ;callerid = "WB6NIL Repeater" <(213) 555-0123>  ; Callerid for phone calls
 ;idrecording = wb6nil			; id recording
 ;accountcode=RADIO			; account code (optional)
 ;funcchar = *				; function lead-in character (defaults to '*')
 ;endchar = #				; command mode end character (defaults to '#')
 ;;nobusyout=yes				; (optional) Do not busy-out reverse-patch when
 					; normal patch in use
 ;hangtime=1000				; squelch tail hang time (in ms) (optional)
 ;totime=100000				; transmit time-out time (in ms) (optional)
 ;idtime=30000				; id interval time (in ms) (optional)
 ;politeid=30000				; time in milliseconds before ID timer
 					; expires to try and ID in the tail.
 					; (optional, default is 30000).
 ;idtalkover=|iwb6nil/rpt		; Talkover ID (optional) default is none
 ;unlinkedct=ct2				; unlinked courtesy tone (optional) default is none
 ;; The tailmessagetime,tailsquashedtime, and tailmessages need to be set
 ;; to support tail messages. They can be omitted otherwise.
 ;tailmessagetime=300000			; Play a tail message every 5 mins
 ;tailsquashedtime=30000			; If squashed by another user,
 ;;					  try again after 30 seconds
 ;tailmessages=msg1,msg2,msg3		;list of messages to be played for tail message
 ; The default values for hangtime, time-out time, and id interval time are
 ; 5 seconds (5000 ms),  3 minutes (180000 ms), and 5 minutes (300000 ms)
 ; respectively
 ;[001]					; Node ID of first repeater
 ;rxchannel = Zap/3			; Rx audio/signalling channel
 ; Note: if you use a unified interface (tx/rx on one channel), only
 ; specify the rxchannel and the txchannel will be assumed from the rxchannel
 ;txchannel = Zap/4			; Tx audio/signalling channel
 ;functions = functions-repeater		; DTMF function list
 ;; specify this for a different function list then local when on link
 ;;link_functions = functions-different	; DTMF function list for link
 ;;phone_functions = functions-phone	; (optional) different functions for 'P' mode
 ;;dphone_functions = functions-dphone	; (optional) different functions for 'D' mode
 ;;nodes = nodes-different		; (optional) different node list
 ;tonezone = us				; use US tones (default)
 ;context = default			; dialing context for phone
 ;callerid = "WB6NIL Repeater" <(213) 555-0123>  ; Callerid for phone calls
 ;idrecording = wb6nil			; id recording
 ;accountcode=RADIO			; account code (optional)
 ;funcchar = *				; function lead-in character (defaults to '*')
 ;endchar = #				; command mode end character (defaults to '#')
 ;;nobusyout=yes				; (optional) Do not busy-out reverse-patch when
 					; normal patch in use
 ;hangtime=1000				; squelch tail hang time (in ms) (optional)
 ;totime=100000				; transmit time-out time (in ms) (optional)
 ;idtime=30000				; id interval time (in ms) (optional)
 ;politeid=30000				; time in milliseconds before ID timer
 					; expires to try and ID in the tail.
 					; (optional, default is 30000).
 ;idtalkover=|iwb6nil/rpt		; Talkover ID (optional) default is none
 ;unlinkedct=ct2				; unlinked courtesy tone (optional) default is none
 ;[002]					; Node ID of remote base
 ;rxchannel = Zap/5			; Rx audio/signalling channel
 ; Note: if you use a unified interface (tx/rx on one channel), only
 ; specify the rxchannel and the txchannel will be assumed from the rxchannel
 ;txchannel = Zap/6			; Tx audio/signalling channel
 ;functions = functions-remote
 ;remote = ft897				; Set remote=y for dumb remote or
 					; remote=ft897 for Yaesu FT-897 or
 					; remote=rbi for Doug Hall RBI1
 ;iobase = 0x378				; Specify IO port for parallel port (optional)
 ;[functions-repeater]
 ;1=ilink,1				; Specific link disconnect
 ;2=ilink,2				; Specific Link connect -  monitor only
 ;3=ilink,3				; Specific Link connect - transceive
 ;4=ilink,4				; Enter command mode on a specific link
 ;7=ilink,5				; Link status
 ;;XX=ilink,6				; Disconnect all links (not used here)
 ;80=status,1				; System info
 ;81=status,2				; Time
 ;82=status,3				; app_rpt.c Version
 ;6=autopatchup				; Autopatch up
 ;0=autopatchdn				; Autopatch down
 ;90=cop,1				; System warm boot
 ;91=cop,2				; System enable
 ;92=cop,3				; System disable
 ;[functions-remote]
 ;0=remote,1				; Retrieve Memory
 ;1=remote,2				; Set freq.
 ;2=remote,3				; Set Rx PL tone.
 ;40=remote,100				; Rx PL off
 ;41=remote,101				; Rx PL on
 ;42=remote,102				; Tx PL off
 ;43=remote,103				; Tx PL on
 ;44=remote,104				; Low Pwr
 ;45=remote,105				; Med Pwr
 ;46=remote,106				; Hi Pwr
 ;5=remote,5				; Status
 ;[telemetry]
 ; Telemetry entries are shared across all repeaters
 ; Can be a tone sequence, morse string, or a file
 ;
 ; |t - Tone escape sequence
 ;
 ; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, duration, amplitude)
 ; Single frequencies are created by setting freq1 or freq2 to zero.
 ;
 ; |m - Morse escape sequence
 ;
 ; Sends Morse code at the telemetry amplitude and telemetry frequency as defined in the
 ; [morse] section.
 ;
 ; Follow with an alphanumeric string
 ;
 ; |i - Morse ID escape sequence
 ;
 ; Sends Morse code at the ID amplitude and ID frequency as defined in the
 ; [morse] section.
 ;
 ; Follow with an alphanumeric string
 ;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
 ;ct2=|t(660,880,150,2048)
 ;ct3=|t(440,0,150,2048)
 ;ct4=|t(550,0,150,2048)
 ;ct5=|t(660,0,150,2048)
 ;ct6=|t(880,0,150,2048)
 ;ct7=|t(660,440,150,2048)
 ;ct8=|t(700,1100,150,2048)
 ;remotetx=|t(2000,0,75,2048)(0,0,75,0)(1600,0,75,2048);
 ;remotemon=|t(1600,0,75,2048)
 ;cmdmode=|t(900,903,200,2048)
 ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
 ;[morse]
 ;speed=20		; Approximate speed in WPM
 ;frequency=800		; Morse Telemetry Frequency
 ;amplitude=4096		; Morse Telemetry Amplitude
 ;idfrequency=330		; Morse ID Frequency
 ;idamplitude=2048	; Morse ID Amplitude
 ;[nodes]
 ;000 = context_A@foo.bar.com/1234,foo.bar.com
 ;001 = context_B@baz.waldo.com/4321,baz.waldo.com
 ;002 = context_C@pepper.salt.com/5678,pepper.salt.com,y  ; this is a remote
 ;of course, you can also specify these with domain names, but why rely
 ;on DNS working unnecessarily?
 ;[memory]
 ;; this example gives you 146.460, simplex, 100.0 HZ PL, hi-power, transmit PL
 ;00 = 146.460,100.0,sht
 ;; this example gives you 146.940, minus offset, 100.0 HZ PL, low-power, no PL
 ;01 = 146.940,100.0,-l
 ; The format for these entries is:  Receive-Freq,Receive-PL,Attrbutes
 ;     Attributes: l=low power, m=medium power, h=high power, -=minus offset,
 ;	s=simplex, +=plus offset, t=tx PL enable, r=rx PL enable

OpenPKG Specs / annotate

asterisk/rpt.conf@acad5c9dea5f (annotated)

asterisk/rpt.conf