comparison: asterisk/rpt.conf
asterisk/rpt.conf
- changeset 281
- acad5c9dea5f
equal
deleted
inserted
replaced
| -1:000000000000 | 0:12e644df07cd |
|---|---|
| 1 ; Radio Repeater / Remote Base configuration file (for use with app_rpt) | |
| 2 ; As of app_rpt version 0.39, 12/20/2005 | |
| 3 ; | |
| 4 | |
| 5 ;[000] ; Node ID of first repeater | |
| 6 | |
| 7 ;rxchannel = Zap/1 ; Rx audio/signalling channel | |
| 8 ; Note: if you use a unified interface (tx/rx on one channel), only | |
| 9 ; specify the rxchannel and the txchannel will be assumed from the rxchannel | |
| 10 ;txchannel = Zap/2 ; Tx audio/signalling channel | |
| 11 ;duplex = 2 ; (Optional) set duplex operating mode | |
| 12 ;; 0 = half duplex (telemetry and courtesy tones do not transmit) | |
| 13 ;; 1 = semi-half duplex (telemetry and courtesy tones transmit, but not | |
| 14 ;; repeated audio | |
| 15 ;; 2 = normal full-duplex mode (Default) | |
| 16 ;; 3 = full-duplex mode, without repeated audio from main input source | |
| 17 ;functions = functions-repeater ; DTMF function list | |
| 18 ;; specify this for a different function list then local when on link | |
| 19 ;;link_functions = functions-different ; DTMF function list for link | |
| 20 ;;phone_functions = functions-phone ; (optional) different functions for 'P' mode | |
| 21 ;;dphone_functions = functions-dphone ; (optional) different functions for 'D' mode | |
| 22 ;;nodes = nodes-different ; (optional) different node list | |
| 23 ;tonezone = us ; use US tones (default) | |
| 24 ;context = default ; dialing context for phone | |
| 25 ;callerid = "WB6NIL Repeater" <(213) 555-0123> ; Callerid for phone calls | |
| 26 ;idrecording = wb6nil ; id recording | |
| 27 ;accountcode=RADIO ; account code (optional) | |
| 28 ;funcchar = * ; function lead-in character (defaults to '*') | |
| 29 ;endchar = # ; command mode end character (defaults to '#') | |
| 30 ;;nobusyout=yes ; (optional) Do not busy-out reverse-patch when | |
| 31 ; normal patch in use | |
| 32 ;hangtime=1000 ; squelch tail hang time (in ms) (optional) | |
| 33 ;totime=100000 ; transmit time-out time (in ms) (optional) | |
| 34 ;idtime=30000 ; id interval time (in ms) (optional) | |
| 35 ;politeid=30000 ; time in milliseconds before ID timer | |
| 36 ; expires to try and ID in the tail. | |
| 37 ; (optional, default is 30000). | |
| 38 ;idtalkover=|iwb6nil/rpt ; Talkover ID (optional) default is none | |
| 39 ;unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none | |
| 40 | |
| 41 ;; The tailmessagetime,tailsquashedtime, and tailmessages need to be set | |
| 42 ;; to support tail messages. They can be omitted otherwise. | |
| 43 ;tailmessagetime=300000 ; Play a tail message every 5 mins | |
| 44 ;tailsquashedtime=30000 ; If squashed by another user, | |
| 45 ;; try again after 30 seconds | |
| 46 ;tailmessages=msg1,msg2,msg3 ;list of messages to be played for tail message | |
| 47 | |
| 48 ; The default values for hangtime, time-out time, and id interval time are | |
| 49 ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms) | |
| 50 ; respectively | |
| 51 | |
| 52 ;[001] ; Node ID of first repeater | |
| 53 | |
| 54 ;rxchannel = Zap/3 ; Rx audio/signalling channel | |
| 55 ; Note: if you use a unified interface (tx/rx on one channel), only | |
| 56 ; specify the rxchannel and the txchannel will be assumed from the rxchannel | |
| 57 ;txchannel = Zap/4 ; Tx audio/signalling channel | |
| 58 ;functions = functions-repeater ; DTMF function list | |
| 59 ;; specify this for a different function list then local when on link | |
| 60 ;;link_functions = functions-different ; DTMF function list for link | |
| 61 ;;phone_functions = functions-phone ; (optional) different functions for 'P' mode | |
| 62 ;;dphone_functions = functions-dphone ; (optional) different functions for 'D' mode | |
| 63 ;;nodes = nodes-different ; (optional) different node list | |
| 64 ;tonezone = us ; use US tones (default) | |
| 65 ;context = default ; dialing context for phone | |
| 66 ;callerid = "WB6NIL Repeater" <(213) 555-0123> ; Callerid for phone calls | |
| 67 ;idrecording = wb6nil ; id recording | |
| 68 ;accountcode=RADIO ; account code (optional) | |
| 69 ;funcchar = * ; function lead-in character (defaults to '*') | |
| 70 ;endchar = # ; command mode end character (defaults to '#') | |
| 71 ;;nobusyout=yes ; (optional) Do not busy-out reverse-patch when | |
| 72 ; normal patch in use | |
| 73 ;hangtime=1000 ; squelch tail hang time (in ms) (optional) | |
| 74 ;totime=100000 ; transmit time-out time (in ms) (optional) | |
| 75 ;idtime=30000 ; id interval time (in ms) (optional) | |
| 76 ;politeid=30000 ; time in milliseconds before ID timer | |
| 77 ; expires to try and ID in the tail. | |
| 78 ; (optional, default is 30000). | |
| 79 ;idtalkover=|iwb6nil/rpt ; Talkover ID (optional) default is none | |
| 80 ;unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none | |
| 81 | |
| 82 ;[002] ; Node ID of remote base | |
| 83 | |
| 84 ;rxchannel = Zap/5 ; Rx audio/signalling channel | |
| 85 ; Note: if you use a unified interface (tx/rx on one channel), only | |
| 86 ; specify the rxchannel and the txchannel will be assumed from the rxchannel | |
| 87 ;txchannel = Zap/6 ; Tx audio/signalling channel | |
| 88 ;functions = functions-remote | |
| 89 ;remote = ft897 ; Set remote=y for dumb remote or | |
| 90 ; remote=ft897 for Yaesu FT-897 or | |
| 91 ; remote=rbi for Doug Hall RBI1 | |
| 92 ;iobase = 0x378 ; Specify IO port for parallel port (optional) | |
| 93 | |
| 94 ;[functions-repeater] | |
| 95 ;1=ilink,1 ; Specific link disconnect | |
| 96 ;2=ilink,2 ; Specific Link connect - monitor only | |
| 97 ;3=ilink,3 ; Specific Link connect - transceive | |
| 98 ;4=ilink,4 ; Enter command mode on a specific link | |
| 99 ;7=ilink,5 ; Link status | |
| 100 ;;XX=ilink,6 ; Disconnect all links (not used here) | |
| 101 | |
| 102 ;80=status,1 ; System info | |
| 103 ;81=status,2 ; Time | |
| 104 ;82=status,3 ; app_rpt.c Version | |
| 105 | |
| 106 ;6=autopatchup ; Autopatch up | |
| 107 ;0=autopatchdn ; Autopatch down | |
| 108 | |
| 109 ;90=cop,1 ; System warm boot | |
| 110 ;91=cop,2 ; System enable | |
| 111 ;92=cop,3 ; System disable | |
| 112 | |
| 113 ;[functions-remote] | |
| 114 | |
| 115 ;0=remote,1 ; Retrieve Memory | |
| 116 ;1=remote,2 ; Set freq. | |
| 117 ;2=remote,3 ; Set Rx PL tone. | |
| 118 ;40=remote,100 ; Rx PL off | |
| 119 ;41=remote,101 ; Rx PL on | |
| 120 ;42=remote,102 ; Tx PL off | |
| 121 ;43=remote,103 ; Tx PL on | |
| 122 ;44=remote,104 ; Low Pwr | |
| 123 ;45=remote,105 ; Med Pwr | |
| 124 ;46=remote,106 ; Hi Pwr | |
| 125 ;5=remote,5 ; Status | |
| 126 | |
| 127 ;[telemetry] | |
| 128 | |
| 129 ; Telemetry entries are shared across all repeaters | |
| 130 ; Can be a tone sequence, morse string, or a file | |
| 131 ; | |
| 132 ; |t - Tone escape sequence | |
| 133 ; | |
| 134 ; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, duration, amplitude) | |
| 135 ; Single frequencies are created by setting freq1 or freq2 to zero. | |
| 136 ; | |
| 137 ; |m - Morse escape sequence | |
| 138 ; | |
| 139 ; Sends Morse code at the telemetry amplitude and telemetry frequency as defined in the | |
| 140 ; [morse] section. | |
| 141 ; | |
| 142 ; Follow with an alphanumeric string | |
| 143 ; | |
| 144 ; |i - Morse ID escape sequence | |
| 145 ; | |
| 146 ; Sends Morse code at the ID amplitude and ID frequency as defined in the | |
| 147 ; [morse] section. | |
| 148 ; | |
| 149 ; Follow with an alphanumeric string | |
| 150 | |
| 151 | |
| 152 ;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) | |
| 153 ;ct2=|t(660,880,150,2048) | |
| 154 ;ct3=|t(440,0,150,2048) | |
| 155 ;ct4=|t(550,0,150,2048) | |
| 156 ;ct5=|t(660,0,150,2048) | |
| 157 ;ct6=|t(880,0,150,2048) | |
| 158 ;ct7=|t(660,440,150,2048) | |
| 159 ;ct8=|t(700,1100,150,2048) | |
| 160 ;remotetx=|t(2000,0,75,2048)(0,0,75,0)(1600,0,75,2048); | |
| 161 ;remotemon=|t(1600,0,75,2048) | |
| 162 ;cmdmode=|t(900,903,200,2048) | |
| 163 ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) | |
| 164 | |
| 165 | |
| 166 ;[morse] | |
| 167 | |
| 168 ;speed=20 ; Approximate speed in WPM | |
| 169 ;frequency=800 ; Morse Telemetry Frequency | |
| 170 ;amplitude=4096 ; Morse Telemetry Amplitude | |
| 171 ;idfrequency=330 ; Morse ID Frequency | |
| 172 ;idamplitude=2048 ; Morse ID Amplitude | |
| 173 | |
| 174 ;[nodes] | |
| 175 | |
| 176 ;000 = context_A@foo.bar.com/1234,foo.bar.com | |
| 177 ;001 = context_B@baz.waldo.com/4321,baz.waldo.com | |
| 178 ;002 = context_C@pepper.salt.com/5678,pepper.salt.com,y ; this is a remote | |
| 179 | |
| 180 ;of course, you can also specify these with domain names, but why rely | |
| 181 ;on DNS working unnecessarily? | |
| 182 | |
| 183 ;[memory] | |
| 184 | |
| 185 ;; this example gives you 146.460, simplex, 100.0 HZ PL, hi-power, transmit PL | |
| 186 ;00 = 146.460,100.0,sht | |
| 187 ;; this example gives you 146.940, minus offset, 100.0 HZ PL, low-power, no PL | |
| 188 ;01 = 146.940,100.0,-l | |
| 189 | |
| 190 ; The format for these entries is: Receive-Freq,Receive-PL,Attrbutes | |
| 191 ; Attributes: l=low power, m=medium power, h=high power, -=minus offset, | |
| 192 ; s=simplex, +=plus offset, t=tx PL enable, r=rx PL enable | |
| 193 |
