OpenPKG Specs: arpd/arpd.spec@c10fb90893b9 (annotated)

arpd/arpd.spec@c10fb90893b9 (annotated)

arpd/arpd.spec

Thu, 04 Oct 2012 20:30:05 +0200

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Thu, 04 Oct 2012 20:30:05 +0200
changeset 715: c10fb90893b9
parent 714: 119553d296d2
permissions: -rw-r--r--

Correct out of date build configuration, porting to Solaris 11 network
link infrastructure and new libpcap logic. This additionally allows for
device drivers in subdirectories of /dev. Correct packaged nmap
personalities and signatures to work out of the box. Finally, hack
arpd logic to properly close sockets and quit on TERM by repeating
signaling in the run command script. Sadly, all this fails to correct
the run time behaviour of honeyd which fails to bind to the IP layer.

 ##
 ##  arpd.spec -- OpenPKG RPM Package Specification
 ##  Copyright (c) 2000-2008 OpenPKG Foundation e.V. <http://openpkg.net/>
 ##
 ##  Permission to use, copy, modify, and distribute this software for
 ##  any purpose with or without fee is hereby granted, provided that
 ##  the above copyright notice and this permission notice appear in all
 ##  copies.
 ##
 ##  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
 ##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 ##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 ##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
 ##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 ##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 ##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 ##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 ##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 ##  SUCH DAMAGE.
 ##
 #   package information
 Name:         arpd
 Summary:      Address Resolution Protocol (ARP) Reply Daemon
 URL:          http://www.honeyd.org/tools.php
 Vendor:       Niels Provos, Dug Song
 Packager:     OpenPKG Foundation e.V.
 Distribution: OpenPKG Community
 Class:        EVAL
 Group:        Mapping
 License:      GNU
 Version:      0.2
 Release:      20120800
 #   package options
 %option       with_fsl  yes
 #   list of sources
 Source0:      http://www.citi.umich.edu/u/provos/honeyd/arpd-%{version}.tar.gz
 Source1:      rc.arpd
 Source2:      fsl.arpd
 Patch0:       arpd.patch
 #   build information
 BuildPreReq:  OpenPKG, openpkg >= 20100101, libdnet, libpcap, libevent, gcc, make
 PreReq:       OpenPKG, openpkg >= 20100101, libdnet, libpcap, libevent
 %if "%{with_fsl}" == "yes"
 BuildPreReq:  fsl
 PreReq:       fsl
 %endif
 %description
     Arpd is an Address Resolution Protocol (ARP) daemon which replies to
     any ARP request for an IP address matching the specified destination
     network with the hardware MAC address of the own interface, but only
     after determining if another host already claims it. Any IP address
     claimed by arpd is eventually forgotten after a period of inactivity
     or after a hard timeout, and is relinquished if the real owner shows
     up. This enables a single host to claim all unassigned addresses on
     a LAN for network monitoring or simulation.
 %track
     prog arpd = {
         version   = %{version}
         url       = http://www.honeyd.org/tools.php
         regex     = arpd-(__VER__)\.tar\.gz
     }
 %prep
     %setup -q -n arpd
     %patch -p0
     %{l_shtool} subst \
         -e 's;LIBS=$DNETLIB;LIBS="$LIBS $DNETLIB";' \
         -e 's;CFLAGS=$DNETINC;CFLAGS="$CFLAGS $DNETINC";' \
         -e 's;net/bpf\.h;pcap-bpf.h;g' \
         configure
     %{l_shtool} subst \
         -e 's;/var/run/arpd.pid;%{l_prefix}/var/arpd/arpd.pid;' \
         arpd.c arpd.8
 %build
     CC="%{l_cc}" \
     CFLAGS="%{l_cflags -O}" \
     CPPFLAGS="%{l_cppflags}" \
     LDFLAGS="%{l_ldflags} %{l_fsl_ldflags}" \
     LIBS="%{l_fsl_libs} -lpcap" \
     ./configure \
         --prefix=%{l_prefix} \
         --with-libdnet=%{l_prefix} \
         --with-libpcap=%{l_prefix} \
         --with-libevent=%{l_prefix}
     %{l_make} %{l_mflags}
 %install
     #   create directories
     %{l_shtool} mkdir -f -p -m 755 \
         $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d \
         $RPM_BUILD_ROOT%{l_prefix}/var/arpd
     #   install files
     %{l_make} %{l_mflags} install DESTDIR=$RPM_BUILD_ROOT
     %{l_shtool} install -c -m 755 %{l_value -s -a} \
         %{SOURCE rc.arpd} $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/
     #   install OSSP fsl configuration
     %{l_shtool} mkdir -f -p -m 755 $RPM_BUILD_ROOT%{l_prefix}/etc/fsl
     %{l_shtool} install -c -m 644 %{l_value -s -a} \
         %{SOURCE fsl.arpd} \
         $RPM_BUILD_ROOT%{l_prefix}/etc/fsl/
     #   determine file list
     %{l_rpmtool} files -v -ofiles -r$RPM_BUILD_ROOT \
         %{l_files_std} \
         '%config %{l_prefix}/etc/fsl/fsl.arpd' \
         '%attr(750,%{l_susr},%{l_mgrp}) %{l_prefix}/var/arpd'
 %files -f files
 %clean
 %pre
     #   before upgrade, save status and stop service
     [ $1 -eq 2 ] || exit 0
     eval `%{l_rc} arpd status 2>/dev/null | tee %{l_tmpfile}`
     %{l_rc} arpd stop 2>/dev/null
     exit 0
 %post
     if [ $1 -eq 1 ]; then
         #   display final hints on initial installation
         ( echo "Before starting ARP daemon, please set the configuration variable"
           echo "\"arpd_if\" in $RPM_INSTALL_PREFIX/etc/rc.conf to the name of the"
           echo "used network interface."
         ) | %{l_rpmtool} msg -b -t notice
     fi
     if [ $1 -eq 2 ]; then
         #   after upgrade, restore status
         eval `cat %{l_tmpfile}`; rm -f %{l_tmpfile}
         [ ".$arpd_active" = .yes ] && %{l_rc} arpd start
     fi
     exit 0
 %preun
     #   before erase, stop service and remove log files
     [ $1 -eq 0 ] || exit 0
     %{l_rc} arpd stop 2>/dev/null
     rm -f $RPM_INSTALL_PREFIX/var/arpd/*.log* >/dev/null 2>&1 || true
     exit 0

OpenPKG Specs / annotate

arpd/arpd.spec@c10fb90893b9 (annotated)

arpd/arpd.spec