OpenPKG Specs: asterisk/features.conf@f29abea29121 (annotated)

asterisk/features.conf@f29abea29121 (annotated)

asterisk/features.conf

Mon, 27 Apr 2009 12:19:05 +0200

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Mon, 27 Apr 2009 12:19:05 +0200
changeset 202: f29abea29121
permissions: -rw-r--r--

Import new package spec for introduction into repository.

 ;
 ; Sample Call Features (parking, transfer, etc) configuration
 ;
 ;[general]
 ;parkext => 700			; What extension to dial to park
 ;parkpos => 701-720		; What extensions to park calls on. These needs to be
 				; numeric, as Asterisk starts from the start position
 				; and increments with one for the next parked call.
 ;context => parkedcalls		; Which context parked calls are in
 ;parkingtime => 45		; Number of seconds a call can be parked for
 				; (default is 45 seconds)
 ;courtesytone = beep		; Sound file to play to the parked caller
 				; when someone dials a parked call
 				; or the Touch Monitor is activated/deactivated.
 ;parkedplay = caller		; Who to play the courtesy tone to when picking up a parked call
 				; one of: parked, caller, both  (default is caller)
 ;adsipark = yes			; if you want ADSI parking announcements
 ;findslot => next		; Continue to the 'next' free parking space.
 				; Defaults to 'first' available
 ;parkedmusicclass=default	; This is the MOH class to use for the parked channel
 				; as long as the class is not set on the channel directly
 				; using Set(CHANNEL(musicclass)=whatever) in the dialplan
 ;transferdigittimeout => 3	; Number of seconds to wait between digits when transferring a call
 				; (default is 3 seconds)
 ;xfersound = beep		; to indicate an attended transfer is complete
 ;xferfailsound = beeperr	; to indicate a failed transfer
 ;pickupexten = *8		; Configure the pickup extension. (default is *8)
 ;featuredigittimeout = 500	; Max time (ms) between digits for
 				; feature activation  (default is 500 ms)
 ;atxfernoanswertimeout = 15	; Timeout for answer on attended transfer default is 15 seconds.
 ; Note that the DTMF features listed below only work when two channels have answered and are bridged together.
 ; They can not be used while the remote party is ringing or in progress. If you require this feature you can use
 ; chan_local in combination with Answer to accomplish it.
 ;[featuremap]
 ;blindxfer => #1		; Blind transfer  (default is #)
 ;disconnect => *0		; Disconnect  (default is *)
 ;automon => *1			; One Touch Record a.k.a. Touch Monitor
 ;atxfer => *2			; Attended transfer
 ;parkcall => #72                ; Park call (one step parking)
 ;[applicationmap]
 ; Note that the DYNAMIC_FEATURES channel variable must be set to use the features
 ; defined here.  The value of DYNAMIC_FEATURES should be the names of the features
 ; to allow the channel to use separated by '#'.  For example:
 ;
 ;    Set(DYNAMIC_FEATURES=myfeature1#myfeature2#myfeature3)
 ;
 ;
 ; The syntax for declaring a dynamic feature is the following:
 ;
 ;<FeatureName> => <DTMF_sequence>,<ActivateOn>[/<ActivatedBy>],<Application>[,<AppArguments>[,MOH_Class]]
 ;
 ;  FeatureName   -> This is the name of the feature used in when setting the
 ;                   DYNAMIC_FEATURES variable to enable usage of this feature.
 ;  DTMF_sequence -> This is the key sequence used to activate this feature.
 ;  ActivateOn    -> This is the channel of the call that the application will be executed
 ;                   on. Valid values are "self" and "peer". "self" means run the
 ;                   application on the same channel that activated the feature. "peer"
 ;                   means run the application on the opposite channel from the one that
 ;                   has activated the feature.
 ;  ActivatedBy   -> This is which channel is allowed to activate this feature. Valid
 ;                   values are "caller", "callee", and "both". "both" is the default.
 ;                   The "caller" is the channel that executed the Dial application, while
 ;                   the "callee" is the channel called by the Dial application.
 ;  Application   -> This is the application to execute.
 ;  AppArguments  -> These are the arguments to be passed into the application.
 ;  MOH_Class     -> This is the music on hold class to play while the idle
 ;                   channel waits for the feature to complete. If left blank,
 ;                   no music will be played.
 ;
 ;
 ; IMPORTANT NOTE: The applicationmap is not intended to be used for all Asterisk
 ;   applications. When applications are used in extensions.conf, they are executed
 ;   by the PBX core. In this case, these applications are executed outside of the
 ;   PBX core, so it does *not* make sense to use any application which has any
 ;   concept of dialplan flow. Examples of this would be things like Macro, Goto,
 ;   Background, WaitExten, and many more.
 ;
 ; Enabling these features means that the PBX needs to stay in the media flow and
 ; media will not be re-directed if DTMF is sent in the media stream.
 ;
 ; Example Usage:
 ;
 ;testfeature => #9,peer,Playback,tt-monkeys  ;Allow both the caller and callee to play
 ;                                            ;tt-monkeys to the opposite channel
 ;
 ;pauseMonitor   => #1,self/callee,Pausemonitor     ;Allow the callee to pause monitoring
 ;                                                  ;on their channel
 ;unpauseMonitor => #3,self/callee,UnPauseMonitor   ;Allow the callee to unpause monitoring
 ;                                                  ;on their channel
 ;

OpenPKG Specs / annotate

asterisk/features.conf@f29abea29121 (annotated)

asterisk/features.conf