OpenPKG Specs: asterisk/indications.conf@f29abea29121 (annotated)

asterisk/indications.conf@f29abea29121 (annotated)

asterisk/indications.conf

Mon, 27 Apr 2009 12:19:05 +0200

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Mon, 27 Apr 2009 12:19:05 +0200
changeset 202: f29abea29121
permissions: -rw-r--r--

Import new package spec for introduction into repository.

 ; indications.conf
 ; Configuration file for location specific tone indications
 ; used by the pbx_indications module.
 ;
 ; NOTE:
 ;    When adding countries to this file, please keep them in alphabetical
 ;    order according to the 2-character country codes!
 ;
 ; The [general] category is for certain global variables.
 ; All other categories are interpreted as location specific indications
 ;
 ;
 ;[general]
 ;country=us		; default location
 ; [example]
 ; description = string
 ;      The full name of your country, in English.
 ; alias = iso[,iso]*
 ;      List of other countries 2-letter iso codes, which have the same
 ;      tone indications.
 ; ringcadence = num[,num]*
 ;      List of durations the physical bell rings.
 ; dial = tonelist
 ;      Set of tones to be played when one picks up the hook.
 ; busy = tonelist
 ;      Set of tones played when the receiving end is busy.
 ; congestion = tonelist
 ;      Set of tones played when there is some congestion (on the network?)
 ; callwaiting = tonelist
 ;      Set of tones played when there is a call waiting in the background.
 ; dialrecall = tonelist
 ;      Not well defined; many phone systems play a recall dial tone after hook
 ;      flash.
 ; record = tonelist
 ;      Set of tones played when call recording is in progress.
 ; info = tonelist
 ;      Set of tones played with special information messages (e.g., "number is
 ;      out of service")
 ; 'name' = tonelist
 ;      Every other variable will be available as a shortcut for the "PlayList" command
 ;      but will not be used automatically by Asterisk.
 ;
 ;
 ; The tonelist itself is defined by a comma-separated sequence of elements.
 ; Each element consist of a frequency (f) with an optional duration (in ms)
 ; attached to it (f/duration). The frequency component may be a mixture of two
 ; frequencies (f1+f2) or a frequency modulated by another frequency (f1*f2).
 ; The implicit modulation depth is fixed at 90%, though.
 ; If the list element starts with a !, that element is NOT repeated,
 ; therefore, only if all elements start with !, the tonelist is time-limited,
 ; all others will repeat indefinitely.
 ;
 ; concisely:
 ;   element = [!]freq[+|*freq2][/duration]
 ;   tonelist = element[,element]*
 ;
 ; Please note that SPACES ARE NOT ALLOWED in tone lists!
 ;
 ;[at]
 ;description = Austria
 ;ringcadence = 1000,5000
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;dial = 420
 ;busy = 420/400,0/400
 ;ring = 420/1000,0/5000
 ;congestion = 420/200,0/200
 ;callwaiting = 420/40,0/1960
 ;dialrecall = 420
 ; RECORDTONE - not specified
 ;record = 1400/80,0/14920
 ;info = 950/330,1450/330,1850/330,0/1000
 ;stutter = 380+420
 ;[au]
 ;description = Australia
 ; Reference http://www.acif.org.au/__data/page/3303/S002_2001.pdf
 ; Normal Ring
 ;ringcadence = 400,200,400,2000
 ; Distinctive Ring 1 - Forwarded Calls
 ; 400,400,200,200,400,1400
 ; Distinctive Ring 2 - Selective Ring 2 + Operator + Recall
 ; 400,400,200,2000
 ; Distinctive Ring 3 - Multiple Subscriber Number 1
 ; 200,200,400,2200
 ; Distinctive Ring 4 - Selective Ring 1 + Centrex
 ; 400,2600
 ; Distinctive Ring 5 - Selective Ring 3
 ; 400,400,200,400,200,1400
 ; Distinctive Ring 6 - Multiple Subscriber Number 2
 ; 200,400,200,200,400,1600
 ; Distinctive Ring 7 - Multiple Subscriber Number 3 + Data Privacy
 ; 200,400,200,400,200,1600
 ; Tones
 ;dial = 413+438
 ;busy = 425/375,0/375
 ;ring = 413+438/400,0/200,413+438/400,0/2000
 ; XXX Congestion: Should reduce by 10 db every other cadence XXX
 ;congestion = 425/375,0/375,420/375,0/375
 ;callwaiting = 425/200,0/200,425/200,0/4400
 ;dialrecall = 413+438
 ; Record tone used for Call Intrusion/Recording or Conference
 ;record = !425/1000,!0/15000,425/360,0/15000
 ;info = 425/2500,0/500
 ; Other Australian Tones
 ; The STD "pips" indicate the call is not an untimed local call
 ;std = !525/100,!0/100,!525/100,!0/100,!525/100,!0/100,!525/100,!0/100,!525/100
 ; Facility confirmation tone (eg. Call Forward Activated)
 ;facility = 425
 ; Message Waiting "stutter" dialtone
 ;stutter = 413+438/100,0/40
 ; Ringtone for calls to Telstra mobiles
 ;ringmobile = 400+450/400,0/200,400+450/400,0/2000
 ;[bg]
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;description = Bulgaria
 ;ringdance = 1000,4000
 ;
 ;dial = 425
 ;busy = 425/500,0/500
 ;ring = 425/1000,0/4000
 ;congestion = 425/250,0/250
 ;callwaiting = 425/150,0/150,425/150,0/4000
 ;dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
 ;record = 1400/425,0/15000
 ;info = 950/330,1400/330,1800/330,0/1000
 ;stutter = 425/1500,0/100
 ;[br]
 ;description = Brazil
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 425/250,0/250
 ;ring = 425/1000,0/4000
 ;congestion = 425/250,0/250,425/750,0/250
 ;callwaiting = 425/50,0/1000
 ; Dialrecall not used in Brazil standard (using UK standard)
 ;dialrecall = 350+440
 ; Record tone is not used in Brazil, use busy tone
 ;record = 425/250,0/250
 ; Info not used in Brazil standard (using UK standard)
 ;info = 950/330,1400/330,1800/330
 ;stutter = 350+440
 ;[be]
 ;description = Belgium
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;ringcadence = 1000,3000
 ;dial = 425
 ;busy = 425/500,0/500
 ;ring = 425/1000,0/3000
 ;congestion = 425/167,0/167
 ;callwaiting = 1400/175,0/175,1400/175,0/3500
 ; DIALRECALL - not specified
 ;dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440"
 ; RECORDTONE - not specified
 ;record = 1400/500,0/15000
 ;info = 900/330,1400/330,1800/330,0/1000
 ;stutter = 425/1000,0/250
 ;[ch]
 ;description = Switzerland
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 425/500,0/500
 ;ring = 425/1000,0/4000
 ;congestion = 425/200,0/200
 ;callwaiting = 425/200,0/200,425/200,0/4000
 ; DIALRECALL - not specified
 ;dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
 ; RECORDTONE - not specified
 ;record = 1400/80,0/15000
 ;info = 950/330,1400/330,1800/330,0/1000
 ;stutter = 425+340/1100,0/1100
 ;[cl]
 ;description = Chile
 ; According to specs from Telefonica CTC Chile
 ;ringcadence = 1000,3000
 ;dial = 400
 ;busy = 400/500,0/500
 ;ring = 400/1000,0/3000
 ;congestion = 400/200,0/200
 ;callwaiting = 400/250,0/8750
 ;dialrecall = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400
 ;record = 1400/500,0/15000
 ;info = 950/333,1400/333,1800/333,0/1000
 ;stutter = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400
 ;[cn]
 ;description = China
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;ringcadence = 1000,4000
 ;dial = 450
 ;busy = 450/350,0/350
 ;ring = 450/1000,0/4000
 ;congestion = 450/700,0/700
 ;callwaiting = 450/400,0/4000
 ;dialrecall = 450
 ;record = 950/400,0/10000
 ;info = 450/100,0/100,450/100,0/100,450/100,0/100,450/400,0/400
 ; STUTTER - not specified
 ;stutter = 450+425
 ;[cz]
 ;description = Czech Republic
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;ringcadence = 1000,4000
 ;dial = 425/330,0/330,425/660,0/660
 ;busy = 425/330,0/330
 ;ring = 425/1000,0/4000
 ;congestion = 425/165,0/165
 ;callwaiting = 425/330,0/9000
 ; DIALRECALL - not specified
 ;dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425/330,0/330,425/660,0/660
 ; RECORDTONE - not specified
 ;record = 1400/500,0/14000
 ;info = 950/330,0/30,1400/330,0/30,1800/330,0/1000
 ; STUTTER - not specified
 ;stutter = 425/450,0/50
 ;[de]
 ;description = Germany
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 425/480,0/480
 ;ring = 425/1000,0/4000
 ;congestion = 425/240,0/240
 ;callwaiting = !425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,0
 ; DIALRECALL - not specified
 ;dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
 ; RECORDTONE - not specified
 ;record = 1400/80,0/15000
 ;info = 950/330,1400/330,1800/330,0/1000
 ;stutter = 425+400
 ;[dk]
 ;description = Denmark
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 425/500,0/500
 ;ring = 425/1000,0/4000
 ;congestion = 425/200,0/200
 ;callwaiting = !425/200,!0/600,!425/200,!0/3000,!425/200,!0/200,!425/200,0
 ; DIALRECALL - not specified
 ;dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
 ; RECORDTONE - not specified
 ;record = 1400/80,0/15000
 ;info = 950/330,1400/330,1800/330,0/1000
 ; STUTTER - not specified
 ;stutter = 425/450,0/50
 ;[ee]
 ;description = Estonia
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 425/300,0/300
 ;ring = 425/1000,0/4000
 ;congestion = 425/200,0/200
 ; CALLWAIT not in accordance to ITU
 ;callwaiting = 950/650,0/325,950/325,0/30,1400/1300,0/2600
 ; DIALRECALL - not specified
 ;dialrecall = 425/650,0/25
 ; RECORDTONE - not specified
 ;record = 1400/500,0/15000
 ; INFO not in accordance to ITU
 ;info = 950/650,0/325,950/325,0/30,1400/1300,0/2600
 ; STUTTER not specified
 ;stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
 ;[es]
 ;description = Spain
 ;ringcadence = 1500,3000
 ;dial = 425
 ;busy = 425/200,0/200
 ;ring = 425/1500,0/3000
 ;congestion = 425/200,0/200,425/200,0/200,425/200,0/600
 ;callwaiting = 425/175,0/175,425/175,0/3500
 ;dialrecall = !425/200,!0/200,!425/200,!0/200,!425/200,!0/200,425
 ;record = 1400/500,0/15000
 ;info = 950/330,0/1000
 ;dialout = 500
 ;[fi]
 ;description = Finland
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 425/300,0/300
 ;ring = 425/1000,0/4000
 ;congestion = 425/200,0/200
 ;callwaiting = 425/150,0/150,425/150,0/8000
 ;dialrecall = 425/650,0/25
 ;record = 1400/500,0/15000
 ;info = 950/650,0/325,950/325,0/30,1400/1300,0/2600
 ;stutter = 425/650,0/25
 ;[fr]
 ;description = France
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;ringcadence = 1500,3500
 ; Dialtone can also be 440+330
 ;dial = 440
 ;busy = 440/500,0/500
 ;ring = 440/1500,0/3500
 ; CONGESTION - not specified
 ;congestion = 440/250,0/250
 ;callwait = 440/300,0/10000
 ; DIALRECALL - not specified
 ;dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
 ; RECORDTONE - not specified
 ;record = 1400/500,0/15000
 ;info = !950/330,!1400/330,!1800/330
 ;stutter = !440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,440
 ;[gr]
 ;description = Greece
 ;ringcadence = 1000,4000
 ;dial = 425/200,0/300,425/700,0/800
 ;busy = 425/300,0/300
 ;ring = 425/1000,0/4000
 ;congestion = 425/200,0/200
 ;callwaiting = 425/150,0/150,425/150,0/8000
 ;dialrecall = 425/650,0/25
 ;record = 1400/400,0/15000
 ;info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0
 ;stutter = 425/650,0/25
 ;[hu]
 ;description = Hungary
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;ringcadence = 1250,3750
 ;dial = 425
 ;busy = 425/300,0/300
 ;ring = 425/1250,0/3750
 ;congestion = 425/300,0/300
 ;callwaiting = 425/40,0/1960
 ;dialrecall = 425+450
 ; RECORDTONE - not specified
 ;record = 1400/400,0/15000
 ;info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0
 ;stutter = 350+375+400
 ;[il]
 ;description = Israel
 ;ringcadence = 1000,3000
 ;dial = 414
 ;busy = 414/500,0/500
 ;ring = 414/1000,0/3000
 ;congestion = 414/250,0/250
 ;callwaiting = 414/100,0/100,414/100,0/100,414/600,0/3000
 ;dialrecall = !414/100,!0/100,!414/100,!0/100,!414/100,!0/100,414
 ;record = 1400/500,0/15000
 ;info = 1000/330,1400/330,1800/330,0/1000
 ;stutter = !414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,414
 ;[in]
 ;description = India
 ;ringcadence = 400,200,400,2000
 ;dial = 400*25
 ;busy = 400/750,0/750
 ;ring = 400*25/400,0/200,400*25/400,0/2000
 ;congestion = 400/250,0/250
 ;callwaiting = 400/200,0/100,400/200,0/7500
 ;dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
 ;record = 1400/500,0/15000
 ;info = !950/330,!1400/330,!1800/330,0/1000
 ;stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
 ;[it]
 ;description = Italy
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;ringcadence = 1000,4000
 ;dial = 425/200,0/200,425/600,0/1000
 ;busy = 425/500,0/500
 ;ring = 425/1000,0/4000
 ;congestion = 425/200,0/200
 ;callwaiting = 425/400,0/100,425/250,0/100,425/150,0/14000
 ;dialrecall = 470/400,425/400
 ;record = 1400/400,0/15000
 ;info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0
 ;stutter = 470/400,425/400
 ;[lt]
 ;description = Lithuania
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 425/350,0/350
 ;ring = 425/1000,0/4000
 ;congestion = 425/200,0/200
 ;callwaiting = 425/150,0/150,425/150,0/4000
 ; DIALRECALL - not specified
 ;dialrecall = 425/500,0/50
 ; RECORDTONE - not specified
 ;record = 1400/500,0/15000
 ;info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0
 ; STUTTER - not specified
 ;stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
 ;[jp]
 ;description = Japan
 ;ringcadence = 1000,2000
 ;dial = 400
 ;busy = 400/500,0/500
 ;ring = 400+15/1000,0/2000
 ;congestion = 400/500,0/500
 ;callwaiting = 400+16/500,0/8000
 ;dialrecall = !400/200,!0/200,!400/200,!0/200,!400/200,!0/200,400
 ;record = 1400/500,0/15000
 ;info = !950/330,!1400/330,!1800/330,0
 ;stutter = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400
 ;[mx]
 ;description = Mexico
 ;ringcadence = 2000,4000
 ;dial = 425
 ;busy = 425/250,0/250
 ;ring = 425/1000,0/4000
 ;congestion = 425/250,0/250
 ;callwaiting = 425/200,0/600,425/200,0/10000
 ;dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
 ;record = 1400/500,0/15000
 ;info = 950/330,0/30,1400/330,0/30,1800/330,0/1000
 ;stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
 ;[my]
 ;description = Malaysia
 ;ringcadence = 2000,4000
 ;dial = 425
 ;busy = 425/500,0/500
 ;ring = 425/400,0/200
 ;congestion = 425/500,0/500
 ;[nl]
 ;description = Netherlands
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;ringcadence = 1000,4000
 ; Most of these 425's can also be 450's
 ;dial = 425
 ;busy = 425/500,0/500
 ;ring = 425/1000,0/4000
 ;congestion = 425/250,0/250
 ;callwaiting = 425/500,0/9500
 ; DIALRECALL - not specified
 ;dialrecall = 425/500,0/50
 ; RECORDTONE - not specified
 ;record = 1400/500,0/15000
 ;info = 950/330,1400/330,1800/330,0/1000
 ;stutter = 425/500,0/50
 ;[no]
 ;description = Norway
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 425/500,0/500
 ;ring = 425/1000,0/4000
 ;congestion = 425/200,0/200
 ;callwaiting = 425/200,0/600,425/200,0/10000
 ;dialrecall = 470/400,425/400
 ;record = 1400/400,0/15000
 ;info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0
 ;stutter = 470/400,425/400
 ;[nz]
 ;description = New Zealand
 ;NOTE - the ITU has different tonesets for NZ, but according to some residents there,
 ;      this is, indeed, the correct way to do it.
 ;ringcadence = 400,200,400,2000
 ;dial = 400
 ;busy = 400/250,0/250
 ;ring = 400+450/400,0/200,400+450/400,0/2000
 ;congestion = 400/375,0/375
 ;callwaiting = !400/200,!0/3000,!400/200,!0/3000,!400/200,!0/3000,!400/200
 ;dialrecall = !400/100!0/100,!400/100,!0/100,!400/100,!0/100,400
 ;record = 1400/425,0/15000
 ;info = 400/750,0/100,400/750,0/100,400/750,0/100,400/750,0/400
 ;stutter = !400/100!0/100,!400/100,!0/100,!400/100,!0/100,!400/100!0/100,!400/100,!0/100,!400/100,!0/100,400
 ;unobtainable = 400/75,0/100,400/75,0/100,400/75,0/100,400/75,0/400
 ;[ph]
 ; reference http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;description = Philippines
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 480+620/500,0/500
 ;ring = 425+480/1000,0/4000
 ;congestion = 480+620/250,0/250
 ;callwaiting = 440/300,0/10000
 ; DIALRECALL - not specified
 ;dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
 ; RECORDTONE - not specified
 ;record = 1400/500,0/15000
 ; INFO - not specified
 ;info = !950/330,!1400/330,!1800/330,0
 ; STUTTER - not specified
 ;stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
 ;[pl]
 ;description = Poland
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 425/500,0/500
 ;ring = 425/1000,0/4000
 ;congestion = 425/500,0/500
 ;callwaiting = 425/150,0/150,425/150,0/4000
 ; DIALRECALL - not specified
 ;dialrecall = 425/500,0/50
 ; RECORDTONE - not specified
 ;record = 1400/500,0/15000
 ; 950/1400/1800 3x0.33 on 1.0 off  repeated 3 times
 ;info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000
 ; STUTTER - not specified
 ;stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
 ;[pt]
 ;description = Portugal
 ;ringcadence = 1000,5000
 ;dial = 425
 ;busy = 425/500,0/500
 ;ring = 425/1000,0/5000
 ;congestion = 425/200,0/200
 ;callwaiting = 440/300,0/10000
 ;dialrecall = 425/1000,0/200
 ;record = 1400/500,0/15000
 ;info = 950/330,1400/330,1800/330,0/1000
 ;stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
 ;[ru]
 ; References:
 ;	http://www.minsvyaz.ru/site.shtml?id=1806
 ;	http://www.aboutphone.info/lib/gost/45-223-2001.html
 ;description = Russian Federation / ex Soviet Union
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 425/350,0/350
 ;ring = 425/1000,0/4000
 ;congestion = 425/175,0/175
 ;callwaiting = 425/200,0/5000
 ;record = 1400/400,0/15000
 ;info = 950/330,1400/330,1800/330,0/1000
 ;dialrecall = 425/400,0/40
 ;stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
 ;[se]
 ;description = Sweden
 ;ringcadence = 1000,5000
 ;dial = 425
 ;busy = 425/250,0/250
 ;ring = 425/1000,0/5000
 ;congestion = 425/250,0/750
 ;callwaiting = 425/200,0/500,425/200,0/9100
 ;dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
 ;record = 1400/500,0/15000
 ;info = !950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,0
 ;stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
 ; stutter = 425/320,0/20        ; Real swedish standard, not used for now
 ;[sg]
 ;description = Singapore
 ; Singapore
 ; Reference: http://www.ida.gov.sg/idaweb/doc/download/I397/ida_ts_pstn1_i4r2.pdf
 ; Frequency specs are:   425 Hz +/- 20Hz; 24 Hz +/- 2Hz; modulation depth 100%; SIT +/- 50Hz
 ;ringcadence = 400,200,400,2000
 ;dial        = 425
 ;ring        = 425*24/400,0/200,425*24/400,0/2000     ; modulation should be 100%, not 90%
 ;busy        = 425/750,0/750
 ;congestion  = 425/250,0/250
 ;callwaiting = 425*24/300,0/200,425*24/300,0/3200
 ;stutter     = !425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,425
 ;info        = 950/330,1400/330,1800/330,0/1000       ; not currently in use acc. to reference
 ;dialrecall  = 425*24/500,0/500,425/500,0/2500        ; unspecified in IDA reference, use repeating Holding Tone A,B
 ;record      = 1400/500,0/15000                       ; unspecified in IDA reference, use 0.5s tone every 15s
 ; additionally defined in reference
 ;nutone      = 425/2500,0/500
 ;intrusion   = 425/250,0/2000
 ;warning     = 425/624,0/4376                         ; end of period tone, warning
 ;acceptance  = 425/125,0/125
 ;holdinga    = !425*24/500,!0/500                     ; followed by holdingb
 ;holdingb    = !425/500,!0/2500
 ;[th]
 ;description = Thailand
 ;ringcadence = 1000,4000
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;dial = 400*50
 ;busy = 400/500,0/500
 ;ring = 420/1000,0/5000
 ;congestion = 400/300,0/300
 ;callwaiting = 1000/400,10000/400,1000/400
 ; DIALRECALL - not specified - use special dial tone instead.
 ;dialrecall = 400*50/400,0/100,400*50/400,0/100
 ; RECORDTONE - not specified
 ;record = 1400/500,0/15000
 ; INFO - specified as an announcement - use special information tones instead
 ;info = 950/330,1400/330,1800/330
 ; STUTTER - not specified
 ;stutter = !400/200,!0/200,!400/600,!0/200,!400/200,!0/200,!400/600,!0/200,!400/200,!0/200,!400/600,!0/200,!400/200,!0/200,!400/600,!0/200,400
 ;[uk]
 ;description = United Kingdom
 ;ringcadence = 400,200,400,2000
 ; These are the official tones taken from BT SIN350. The actual tones
 ; used by BT include some volume differences so sound slightly different
 ; from Asterisk-generated ones.
 ;dial = 350+440
 ; Special dial is the intermittent dial tone heard when, for example,
 ; you have a divert active on the line
 ;specialdial = 350+440/750,440/750
 ; Busy is also called "Engaged"
 ;busy = 400/375,0/375
 ; "Congestion" is the Beep-bip engaged tone
 ;congestion = 400/400,0/350,400/225,0/525
 ; "Special Congestion" is not used by BT very often if at all
 ;specialcongestion = 400/200,1004/300
 ;unobtainable = 400
 ;ring = 400+450/400,0/200,400+450/400,0/2000
 ;callwaiting = 400/100,0/4000
 ; BT seem to use "Special Call Waiting" rather than just "Call Waiting" tones
 ;specialcallwaiting = 400/250,0/250,400/250,0/250,400/250,0/5000
 ; "Pips" used by BT on payphones. (Sounds wrong, but this is what BT claim it
 ; is and I've not used a payphone for years)
 ;creditexpired = 400/125,0/125
 ; These two are used to confirm/reject service requests on exchanges that
 ; don't do voice announcements.
 ;confirm = 1400
 ;switching = 400/200,0/400,400/2000,0/400
 ; This is the three rising tones Doo-dah-dee "Special Information Tone",
 ; usually followed by the BT woman saying an appropriate message.
 ;info = 950/330,0/15,1400/330,0/15,1800/330,0/1000
 ; Not listed in SIN350
 ;record = 1400/500,0/60000
 ;stutter = 350+440/750,440/750
 ;[us]
 ;description = United States / North America
 ;ringcadence = 2000,4000
 ;dial = 350+440
 ;busy = 480+620/500,0/500
 ;ring = 440+480/2000,0/4000
 ;congestion = 480+620/250,0/250
 ;callwaiting = 440/300,0/10000
 ;dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
 ;record = 1400/500,0/15000
 ;info = !950/330,!1400/330,!1800/330,0
 ;stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
 ;[us-old]
 ;description = United States Circa 1950/ North America
 ;ringcadence = 2000,4000
 ;dial = 600*120
 ;busy = 500*100/500,0/500
 ;ring = 420*40/2000,0/4000
 ;congestion = 500*100/250,0/250
 ;callwaiting = 440/300,0/10000
 ;dialrecall = !600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,600*120
 ;record = 1400/500,0/15000
 ;info = !950/330,!1400/330,!1800/330,0
 ;stutter = !600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,600*120
 ;[tw]
 ;description = Taiwan
 ; http://nemesis.lonestar.org/reference/telecom/signaling/dialtone.html
 ; http://nemesis.lonestar.org/reference/telecom/signaling/busy.html
 ; http://www.iproducts.com.tw/ee/kylink/06ky-1000a.htm
 ; http://www.pbx-manufacturer.com/ky120dx.htm
 ; http://www.nettwerked.net/tones.txt
 ; http://www.cisco.com/univercd/cc/td/doc/product/tel_pswt/vco_prod/taiw_sup/taiw2.htm
 ;
 ; busy tone 480+620Hz 0.5 sec. on ,0.5 sec. off
 ; reorder tone 480+620Hz 0.25 sec. on,0.25 sec. off
 ; ringing tone 440+480Hz 1 sec. on ,2 sec. off
 ;
 ;ringcadence = 1000,4000
 ;dial = 350+440
 ;busy = 480+620/500,0/500
 ;ring = 440+480/1000,0/2000
 ;congestion = 480+620/250,0/250
 ;callwaiting = 350+440/250,0/250,350+440/250,0/3250
 ;dialrecall = 300/1500,0/500
 ;record = 1400/500,0/15000
 ;info = !950/330,!1400/330,!1800/330,0
 ;stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
 ;[ve]
 ; Tone definition source for ve found on
 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
 ;description = Venezuela / South America
 ;ringcadence = 1000,4000
 ;dial = 425
 ;busy = 425/500,0/500
 ;ring = 425/1000,0/4000
 ;congestion = 425/250,0/250
 ;callwaiting = 400+450/300,0/6000
 ;dialrecall = 425
 ;record = 1400/500,0/15000
 ;info = !950/330,!1440/330,!1800/330,0/1000
 ;[za]
 ;description = South Africa
 ; http://www.cisco.com/univercd/cc/td/doc/product/tel_pswt/vco_prod/safr_sup/saf02.htm
 ; (definitions for other countries can also be found there)
 ; Note, though, that South Africa uses two switch types in their network --
 ; Alcatel switches -- mainly in the Western Cape, and Siemens elsewhere.
 ; The former use 383+417 in dial, ringback etc.  The latter use 400*33
 ; I've provided both, uncomment the ones you prefer
 ;ringcadence = 400,200,400,2000
 ; dial/ring/callwaiting for the Siemens switches:
 ;dial = 400*33
 ;ring = 400*33/400,0/200,400*33/400,0/2000
 ;callwaiting = 400*33/250,0/250,400*33/250,0/250,400*33/250,0/250,400*33/250,0/250
 ; dial/ring/callwaiting for the Alcatel switches:
 ; dial = 383+417
 ; ring = 383+417/400,0/200,383+417/400,0/2000
 ; callwaiting = 383+417/250,0/250,383+417/250,0/250,383+417/250,0/250,383+417/250,0/250
 ;congestion = 400/250,0/250
 ;busy = 400/500,0/500
 ;dialrecall = 350+440
 ; XXX Not sure about the RECORDTONE
 ;record = 1400/500,0/10000
 ;info = 950/330,1400/330,1800/330,0/330
 ;stutter = !400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,400*33

OpenPKG Specs / annotate

asterisk/indications.conf@f29abea29121 (annotated)

asterisk/indications.conf