OpenPKG Specs: asterisk/zapata.conf@f4a0b439d0fb (annotated)

asterisk/zapata.conf@f4a0b439d0fb (annotated)

asterisk/zapata.conf

Fri, 15 Oct 2010 19:06:09 +0200

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Fri, 15 Oct 2010 19:06:09 +0200
changeset 263: f4a0b439d0fb
permissions: -rw-r--r--

Correct shared library and plugin link logic, as well as informal text.
Update file server URL, update build resource estimations, correct RPATH
logic, allow for qmake(1) static to shared library changes via CONFIG
argument, correct documentation broken title and index links, correct
shared library install path, install only one set of (correct) plugins,
install the designer shared library (as required by QtCreator), announce
features related to shared linking using qmake(1), and correclty
substitute hard coded paths in prl and la library files.

 ;
 ; Zapata telephony interface
 ;
 ; Configuration file
 ;
 ; You need to restart Asterisk to re-configure the Zap channel
 ; CLI> reload chan_zap.so
 ;		will reload the configuration file,
 ;		but not all configuration options are
 ; 		re-configured during a reload.
 ;[trunkgroups]
 ;
 ; Trunk groups are used for NFAS or GR-303 connections.
 ;
 ; Group: Defines a trunk group.
 ;        trunkgroup => <trunkgroup>,<dchannel>[,<backup1>...]
 ;
 ;        trunkgroup  is the numerical trunk group to create
 ;        dchannel    is the zap channel which will have the
 ;                    d-channel for the trunk.
 ;        backup1     is an optional list of backup d-channels.
 ;
 ;trunkgroup => 1,24,48
 ;trunkgroup => 1,24
 ;
 ; Spanmap: Associates a span with a trunk group
 ;        spanmap => <zapspan>,<trunkgroup>[,<logicalspan>]
 ;
 ;        zapspan     is the zap span number to associate
 ;        trunkgroup  is the trunkgroup (specified above) for the mapping
 ;        logicalspan is the logical span number within the trunk group to use.
 ;                    if unspecified, no logical span number is used.
 ;
 ;spanmap => 1,1,1
 ;spanmap => 2,1,2
 ;spanmap => 3,1,3
 ;spanmap => 4,1,4
 ;[channels]
 ;
 ; Default language
 ;
 ;language=en
 ;
 ; Default context
 ;
 ;context=default
 ;
 ; Switchtype:  Only used for PRI.
 ;
 ; national:	  National ISDN 2 (default)
 ; dms100:	  Nortel DMS100
 ; 4ess:           AT&T 4ESS
 ; 5ess:	          Lucent 5ESS
 ; euroisdn:       EuroISDN
 ; ni1:            Old National ISDN 1
 ; qsig:           Q.SIG
 ;
 ;switchtype=national
 ;
 ; Some switches (AT&T especially) require network specific facility IE
 ; supported values are currently 'none', 'sdn', 'megacom', 'tollfreemegacom', 'accunet'
 ;
 ;nsf=none
 ;
 ; PRI Dialplan:  Only RARELY used for PRI.
 ;
 ; unknown:        Unknown
 ; private:        Private ISDN
 ; local:          Local ISDN
 ; national:	  National ISDN
 ; international:  International ISDN
 ; dynamic:	  Dynamically selects the appropriate dialplan
 ;
 ;pridialplan=national
 ;
 ; PRI Local Dialplan:  Only RARELY used for PRI (sets the calling number's numbering plan)
 ;
 ; unknown:        Unknown
 ; private:        Private ISDN
 ; local:          Local ISDN
 ; national:	  National ISDN
 ; international:  International ISDN
 ; dynamic:	  Dynamically selects the appropriate dialplan
 ;
 ;prilocaldialplan=national
 ;
 ; PRI callerid prefixes based on the given TON/NPI (dialplan)
 ; This is especially needed for euroisdn E1-PRIs
 ;
 ; sample 1 for Germany
 ;internationalprefix = 00
 ;nationalprefix = 0
 ;localprefix = 0711
 ;privateprefix = 07115678
 ;unknownprefix =
 ;
 ; sample 2 for Germany
 ;internationalprefix = +
 ;nationalprefix = +49
 ;localprefix = +49711
 ;privateprefix = +497115678
 ;unknownprefix =
 ;
 ; PRI resetinterval: sets the time in seconds between restart of unused
 ; channels, defaults to 3600; minimum 60 seconds.  Some PBXs don't like
 ; channel restarts. so set the interval to a very long interval e.g. 100000000
 ; or 'never' to disable *entirely*.
 ;
 ;resetinterval = 3600
 ;
 ; Overlap dialing mode (sending overlap digits)
 ;
 ;overlapdial=yes
 ;
 ; PRI Out of band indications.
 ; Enable this to report Busy and Congestion on a PRI using out-of-band
 ; notification. Inband indication, as used by Asterisk doesn't seem to work
 ; with all telcos.
 ;
 ; outofband:      Signal Busy/Congestion out of band with RELEASE/DISCONNECT
 ; inband:         Signal Busy/Congestion using in-band tones
 ;
 ; priindication = outofband
 ;
 ; If you need to override the existing channels selection routine and force all
 ; PRI channels to be marked as exclusively selected, set this to yes.
 ; priexclusive = yes
 ;
 ; ISDN Timers
 ; All of the ISDN timers and counters that are used are configurable.  Specify
 ; the timer name, and its value (in ms for timers).
 ; K:    Layer 2 max number of outstanding unacknowledged I frames (default 7)
 ; N200: Layer 2 max number of retransmissions of a frame (default 3)
 ; T200: Layer 2 max time before retransmission of a frame (default 1000 ms)
 ; T203: Layer 2 max time without frames being exchanged (default 10000 ms)
 ; T305: Wait for DISCONNECT acknowledge (default 30000 ms)
 ; T308: Wait for RELEASE acknowledge (default 4000 ms)
 ; T309: Maintain active calls on Layer 2 disconnection (default -1, Asterisk clears calls)
 ;       EuroISDN: 6000 to 12000 ms, according to (N200 + 1) x T200 + 2s
 ;       May vary in other ISDN standards (Q.931 1993 : 90000 ms)
 ; T313: Wait for CONNECT acknowledge, CPE side only (default 3000 ms)
 ;
 ; pritimer => t200,1000
 ; pritimer => t313,4000
 ;
 ; To enable transmission of facility-based ISDN supplementary services (such
 ; as caller name from CPE over facility), enable this option.
 ; facilityenable = yes
 ;
 ;
 ; Signalling method (default is fxs).  Valid values:
 ; em:             E & M
 ; em_w:           E & M Wink
 ; featd:          Feature Group D (The fake, Adtran style, DTMF)
 ; featdmf:        Feature Group D (The real thing, MF (domestic, US))
 ; featdmf_ta:     Feature Group D (The real thing, MF (domestic, US)) through
 ;                 a Tandem Access point
 ; featb:          Feature Group B (MF (domestic, US))
 ; fgccama	  Feature Group C-CAMA (DP DNIS, MF ANI)
 ; fgccamamf	  Feature Group C-CAMA MF (MF DNIS, MF ANI)
 ; fxs_ls:         FXS (Loop Start)
 ; fxs_gs:         FXS (Ground Start)
 ; fxs_ks:         FXS (Kewl Start)
 ; fxo_ls:         FXO (Loop Start)
 ; fxo_gs:         FXO (Ground Start)
 ; fxo_ks:         FXO (Kewl Start)
 ; pri_cpe:        PRI signalling, CPE side
 ; pri_net:        PRI signalling, Network side
 ; gr303fxoks_net: GR-303 Signalling, FXO Loopstart, Network side
 ; gr303fxsks_cpe: GR-303 Signalling, FXS Loopstart, CPE side
 ; sf:	          SF (Inband Tone) Signalling
 ; sf_w:	          SF Wink
 ; sf_featd:       SF Feature Group D (The fake, Adtran style, DTMF)
 ; sf_featdmf:     SF Feature Group D (The real thing, MF (domestic, US))
 ; sf_featb:       SF Feature Group B (MF (domestic, US))
 ; e911:           E911 (MF) style signalling
 ;
 ; The following are used for Radio interfaces:
 ; fxs_rx:         Receive audio/COR on an FXS kewlstart interface (FXO at the
 ;                 channel bank)
 ; fxs_tx:         Transmit audio/PTT on an FXS loopstart interface (FXO at the
 ;                 channel bank)
 ; fxo_rx:         Receive audio/COR on an FXO loopstart interface (FXS at the
 ;                 channel bank)
 ; fxo_tx:         Transmit audio/PTT on an FXO groundstart interface (FXS at
 ;                 the channel bank)
 ; em_rx:          Receive audio/COR on an E&M interface (1-way)
 ; em_tx:          Transmit audio/PTT on an E&M interface (1-way)
 ; em_txrx:        Receive audio/COR AND Transmit audio/PTT on an E&M interface
 ;                 (2-way)
 ; em_rxtx:        Same as em_txrx (for our dyslexic friends)
 ; sf_rx:          Receive audio/COR on an SF interface (1-way)
 ; sf_tx:          Transmit audio/PTT on an SF interface (1-way)
 ; sf_txrx:        Receive audio/COR AND Transmit audio/PTT on an SF interface
 ;                 (2-way)
 ; sf_rxtx:        Same as sf_txrx (for our dyslexic friends)
 ;
 ;signalling=fxo_ls
 ;
 ; If you have an outbound signalling format that is different from format
 ; specified above (but compatible), you can specify outbound signalling format,
 ; (see below). The 'signalling' format specified will be the inbound signalling
 ; format. If you only specify 'signalling', then it will be the format for
 ; both inbound and outbound.
 ;
 ; signalling=featdmf
 ; outsignalling=featb
 ;
 ; For Feature Group D Tandem access, to set the default CIC and OZZ use these
 ; parameters:
 ;defaultozz=0000
 ;defaultcic=303
 ;
 ; A variety of timing parameters can be specified as well
 ; Including:
 ;    prewink:     Pre-wink time (default 50ms)
 ;    preflash:    Pre-flash time (default 50ms)
 ;    wink:        Wink time (default 150ms)
 ;    flash:       Flash time (default 750ms)
 ;    start:       Start time (default 1500ms)
 ;    rxwink:      Receiver wink time (default 300ms)
 ;    rxflash:     Receiver flashtime (default 1250ms)
 ;    debounce:    Debounce timing (default 600ms)
 ;
 ;rxwink=300		; Atlas seems to use long (250ms) winks
 ;
 ; How long generated tones (DTMF and MF) will be played on the channel
 ; (in milliseconds)
 ;toneduration=100
 ;
 ; Whether or not to do distinctive ring detection on FXO lines
 ;
 ;usedistinctiveringdetection=yes
 ;distinctiveringaftercid=yes	; enable dring detection after callerid for those countries like Australia
 				; where the ring cadence is changed *after* the callerid spill.
 ;
 ; Whether or not to use caller ID
 ;
 ;usecallerid=yes
 ;
 ; Type of caller ID signalling in use
 ;     bell     = bell202 as used in US
 ;     v23      = v23 as used in the UK
 ;     v23_jp   = v23 as used in Japan
 ;     dtmf     = DTMF as used in Denmark, Sweden and Netherlands
 ;     smdi     = Use SMDI for callerid.  Requires SMDI to be enabled (usesmdi).
 ;
 ;cidsignalling=bell
 ;
 ; What signals the start of caller ID
 ;     ring     = a ring signals the start
 ;     polarity = polarity reversal signals the start
 ;
 ;cidstart=ring
 ;
 ; Whether or not to hide outgoing caller ID (Override with *67 or *82)
 ;
 ;hidecallerid=no
 ;
 ; Whether or not to enable call waiting on internal extensions
 ; With this set to 'yes', busy extensions will hear the call-waiting
 ; tone, and can use hook-flash to switch between callers. The Dial()
 ; app will not return the "BUSY" result for extensions.
 ;
 ;callwaiting=yes
 ;
 ; Whether or not restrict outgoing caller ID (will be sent as ANI only, not
 ; available for the user)
 ; Mostly use with FXS ports
 ;
 ;restrictcid=no
 ;
 ; Whether or not use the caller ID presentation for the outgoing call that the
 ; calling switch is sending.
 ; See README.callingpres
 ;
 ;usecallingpres=yes
 ;
 ; Some countries (UK) have ring tones with different ring tones (ring-ring),
 ; which means the callerid needs to be set later on, and not just after
 ; the first ring, as per the default.
 ;
 ;sendcalleridafter=1
 ;
 ;
 ; Support Caller*ID on Call Waiting
 ;
 ;callwaitingcallerid=yes
 ;
 ; Support three-way calling
 ;
 ;threewaycalling=yes
 ;
 ; Support flash-hook call transfer (requires three way calling)
 ; Also enables call parking (overrides the 'canpark' parameter)
 ;
 ;transfer=yes
 ;
 ; Allow call parking
 ; ('canpark=no' is overridden by 'transfer=yes')
 ;
 ;canpark=yes
 ;
 ; Support call forward variable
 ;
 ;cancallforward=yes
 ;
 ; Whether or not to support Call Return (*69)
 ;
 ;callreturn=yes
 ;
 ; Stutter dialtone support: If a mailbox is specified without a voicemail
 ; context, then when voicemail is received in a mailbox in the default
 ; voicemail context in voicemail.conf, taking the phone off hook will cause a
 ; stutter dialtone instead of a normal one.
 ;
 ; If a mailbox is specified *with* a voicemail context, the same will result
 ; if voicemail received in mailbox in the specified voicemail context.
 ;
 ; for default voicemail context, the example below is fine:
 ;
 ;mailbox=1234
 ;
 ; for any other voicemail context, the following will produce the stutter tone:
 ;
 ;mailbox=1234@context
 ;
 ; Enable echo cancellation
 ; Use either "yes", "no", or a power of two from 32 to 256 if you wish to
 ; actually set the number of taps of cancellation.
 ;
 ; Note that when setting the number of taps, the number 256 does not translate
 ; to 256 ms of echo cancellation.  echocancel=256 means 256 / 8 = 32 ms.
 ;
 ; Note that if any of your Zaptel cards have hardware echo cancellers,
 ; then this setting only turns them on and off; numeric settings will
 ; be treated as "yes". There are no special settings required for
 ; hardware echo cancellers; when present and enabled in their kernel
 ; modules, they take precedence over the software echo canceller compiled
 ; into Zaptel automatically.
 ;
 ;echocancel=yes
 ;
 ; Generally, it is not necessary (and in fact undesirable) to echo cancel when
 ; the circuit path is entirely TDM.  You may, however, change this behavior
 ; by enabling the echo cancel during pure TDM bridging below.
 ;
 ;echocancelwhenbridged=yes
 ;
 ; In some cases, the echo canceller doesn't train quickly enough and there
 ; is echo at the beginning of the call.  Enabling echo training will cause
 ; asterisk to briefly mute the channel, send an impulse, and use the impulse
 ; response to pre-train the echo canceller so it can start out with a much
 ; closer idea of the actual echo.  Value may be "yes", "no", or a number of
 ; milliseconds to delay before training (default = 400)
 ;
 ; WARNING:  In some cases this option can make echo worse!  If you are
 ; trying to debug an echo problem, it is worth checking to see if your echo
 ; is better with the option set to yes or no.  Use whatever setting gives
 ; the best results.
 ;
 ; Note that these parameters do not apply to hardware echo cancellers.
 ;
 ;echotraining=yes
 ;echotraining=800
 ;
 ; If you are having trouble with DTMF detection, you can relax the DTMF
 ; detection parameters.  Relaxing them may make the DTMF detector more likely
 ; to have "talkoff" where DTMF is detected when it shouldn't be.
 ;
 ;relaxdtmf=yes
 ;
 ; You may also set the default receive and transmit gains (in dB)
 ;
 ;rxgain=0.0
 ;txgain=0.0
 ;
 ; Logical groups can be assigned to allow outgoing rollover.  Groups range
 ; from 0 to 63, and multiple groups can be specified.
 ;
 ;group=1
 ;
 ; Ring groups (a.k.a. call groups) and pickup groups.  If a phone is ringing
 ; and it is a member of a group which is one of your pickup groups, then
 ; you can answer it by picking up and dialling *8#.  For simple offices, just
 ; make these both the same.  Groups range from 0 to 63.
 ;
 ;callgroup=1
 ;pickupgroup=1
 ;
 ; Specify whether the channel should be answered immediately or if the simple
 ; switch should provide dialtone, read digits, etc.
 ; Note: If immediate=yes the dialplan execution will always start at extension
 ; 's' priority 1 regardless of the dialed number!
 ;
 ;immediate=no
 ;
 ; Specify whether flash-hook transfers to 'busy' channels should complete or
 ; return to the caller performing the transfer (default is yes).
 ;
 ;transfertobusy=no
 ;
 ; CallerID can be set to "asreceived" or a specific number if you want to
 ; override it.  Note that "asreceived" only applies to trunk interfaces.
 ;
 ;callerid=2564286000
 ;
 ; AMA flags affects the recording of Call Detail Records.  If specified
 ; it may be 'default', 'omit', 'billing', or 'documentation'.
 ;
 ;amaflags=default
 ;
 ; Channels may be associated with an account code to ease
 ; billing
 ;
 ;accountcode=lss0101
 ;
 ; ADSI (Analog Display Services Interface) can be enabled on a per-channel
 ; basis if you have (or may have) ADSI compatible CPE equipment
 ;
 ;adsi=yes
 ;
 ; SMDI (Simplified Message Desk Interface) can be enabled on a per-channel
 ; basis if you would like that channel to behave like an SMDI message desk.
 ; The SMDI port specified should have already been defined in smdi.conf.  The
 ; default port is /dev/ttyS0.
 ;
 ;usesmdi=yes
 ;smdiport=/dev/ttyS0
 ;
 ; On trunk interfaces (FXS) and E&M interfaces (E&M, Wink, Feature Group D
 ; etc, it can be useful to perform busy detection either in an effort to
 ; detect hangup or for detecting busies.  This enables listening for
 ; the beep-beep busy pattern.
 ;
 ;busydetect=yes
 ;
 ; If busydetect is enabled, it is also possible to specify how many busy tones
 ; to wait for before hanging up.  The default is 4, but better results can be
 ; achieved if set to 6 or even 8.  Mind that the higher the number, the more
 ; time that will be needed to hangup a channel, but lowers the probability
 ; that you will get random hangups.
 ;
 ;busycount=4
 ;
 ; If busydetect is enabled, it is also possible to specify the cadence of your
 ; busy signal.  In many countries, it is 500msec on, 500msec off.  Without
 ; busypattern specified, we'll accept any regular sound-silence pattern that
 ; repeats <busycount> times as a busy signal.  If you specify busypattern,
 ; then we'll further check the length of the sound (tone) and silence, which
 ; will further reduce the chance of a false positive.
 ;
 ;busypattern=500,500
 ;
 ; NOTE: In the Asterisk Makefile you'll find further options to tweak the busy
 ; detector.  If your country has a busy tone with the same length tone and
 ; silence (as many countries do), consider defining the
 ; -DBUSYDETECT_COMPARE_TONE_AND_SILENCE option.
 ;
 ; Use a polarity reversal to mark when a outgoing call is answered by the
 ; remote party.
 ;
 ;answeronpolarityswitch=yes
 ;
 ; In some countries, a polarity reversal is used to signal the disconnect of a
 ; phone line.  If the hanguponpolarityswitch option is selected, the call will
 ; be considered "hung up" on a polarity reversal.
 ;
 ;hanguponpolarityswitch=yes
 ;
 ; On trunk interfaces (FXS) it can be useful to attempt to follow the progress
 ; of a call through RINGING, BUSY, and ANSWERING.   If turned on, call
 ; progress attempts to determine answer, busy, and ringing on phone lines.
 ; This feature is HIGHLY EXPERIMENTAL and can easily detect false answers,
 ; so don't count on it being very accurate.
 ;
 ; Few zones are supported at the time of this writing, but may be selected
 ; with "progzone"
 ;
 ; This feature can also easily detect false hangups. The symptoms of this is
 ; being disconnected in the middle of a call for no reason.
 ;
 ;callprogress=yes
 ;progzone=us
 ;
 ; FXO (FXS signalled) devices must have a timeout to determine if there was a
 ; hangup before the line was answered.  This value can be tweaked to shorten
 ; how long it takes before Zap considers a non-ringing line to have hungup.
 ;
 ;ringtimeout=8000
 ;
 ; For FXO (FXS signalled) devices, whether to use pulse dial instead of DTMF
 ;
 ;pulsedial=yes
 ;
 ; For fax detection, uncomment one of the following lines.  The default is *OFF*
 ;
 ;faxdetect=both
 ;faxdetect=incoming
 ;faxdetect=outgoing
 ;faxdetect=no
 ;
 ; This option specifies a preference for which music on hold class this channel
 ; should listen to when put on hold if the music class has not been set on the
 ; channel with Set(CHANNEL(musicclass)=whatever) in the dialplan, and the peer
 ; channel putting this one on hold did not suggest a music class.
 ;
 ; If this option is set to "passthrough", then the hold message will always be
 ; passed through as signalling instead of generating hold music locally. This
 ; setting is only valid when used on a channel that uses digital signalling.
 ;
 ; This option may be specified globally, or on a per-user or per-peer basis.
 ;
 ;mohinterpret=default
 ;
 ; This option specifies which music on hold class to suggest to the peer channel
 ; when this channel places the peer on hold. It may be specified globally or on
 ; a per-user or per-peer basis.
 ;
 ;mohsuggest=default
 ;
 ; PRI channels can have an idle extension and a minunused number.  So long as
 ; at least "minunused" channels are idle, chan_zap will try to call "idledial"
 ; on them, and then dump them into the PBX in the "idleext" extension (which
 ; is of the form exten@context).  When channels are needed the "idle" calls
 ; are disconnected (so long as there are at least "minidle" calls still
 ; running, of course) to make more channels available.  The primary use of
 ; this is to create a dynamic service, where idle channels are bundled through
 ; multilink PPP, thus more efficiently utilizing combined voice/data services
 ; than conventional fixed mappings/muxings.
 ;
 ;idledial=6999
 ;idleext=6999@dialout
 ;minunused=2
 ;minidle=1
 ;
 ; Configure jitter buffers in zapata (each one is 20ms, default is 4)
 ;
 ;jitterbuffers=4
 ;
 ;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
 ; jbenable = yes              ; Enables the use of a jitterbuffer on the receiving side of a
                               ; ZAP channel. Defaults to "no". An enabled jitterbuffer will
                               ; be used only if the sending side can create and the receiving
                               ; side can not accept jitter. The ZAP channel can't accept jitter,
                               ; thus an enabled jitterbuffer on the receive ZAP side will always
                               ; be used if the sending side can create jitter.
 ; jbmaxsize = 200             ; Max length of the jitterbuffer in milliseconds.
 ; jbresyncthreshold = 1000    ; Jump in the frame timestamps over which the jitterbuffer is
                               ; resynchronized. Useful to improve the quality of the voice, with
                               ; big jumps in/broken timestamps, usually sent from exotic devices
                               ; and programs. Defaults to 1000.
 ; jbimpl = fixed              ; Jitterbuffer implementation, used on the receiving side of a ZAP
                               ; channel. Two implementations are currently available - "fixed"
                               ; (with size always equals to jbmax-size) and "adaptive" (with
                               ; variable size, actually the new jb of IAX2). Defaults to fixed.
 ; jblog = no                  ; Enables jitterbuffer frame logging. Defaults to "no".
 ;-----------------------------------------------------------------------------------
 ;
 ; You can define your own custom ring cadences here.  You can define up to 8
 ; pairs.  If the silence is negative, it indicates where the callerid spill is
 ; to be placed.  Also, if you define any custom cadences, the default cadences
 ; will be turned off.
 ;
 ; Syntax is:  cadence=ring,silence[,ring,silence[...]]
 ;
 ; These are the default cadences:
 ;
 ;cadence=125,125,2000,-4000
 ;cadence=250,250,500,1000,250,250,500,-4000
 ;cadence=125,125,125,125,125,-4000
 ;cadence=1000,500,2500,-5000
 ;
 ; Each channel consists of the channel number or range.  It inherits the
 ; parameters that were specified above its declaration.
 ;
 ; For GR-303, CRV's are created like channels except they must start with the
 ; trunk group followed by a colon, e.g.:
 ;
 ; crv => 1:1
 ; crv => 2:1-2,5-8
 ;
 ;
 ;callerid="Green Phone"<(256) 428-6121>
 ;channel => 1
 ;callerid="Black Phone"<(256) 428-6122>
 ;channel => 2
 ;callerid="CallerID Phone" <(256) 428-6123>
 ;callerid="CallerID Phone" <(630) 372-1564>
 ;callerid="CallerID Phone" <(256) 704-4666>
 ;channel => 3
 ;callerid="Pac Tel Phone" <(256) 428-6124>
 ;channel => 4
 ;callerid="Uniden Dead" <(256) 428-6125>
 ;channel => 5
 ;callerid="Cortelco 2500" <(256) 428-6126>
 ;channel => 6
 ;callerid="Main TA 750" <(256) 428-6127>
 ;channel => 44
 ;
 ; For example, maybe we have some other channels which start out in a
 ; different context and use E & M signalling instead.
 ;
 ;context=remote
 ;sigalling=em
 ;channel => 15
 ;channel => 16
 ;signalling=em_w
 ;
 ; All those in group 0 I'll use for outgoing calls
 ;
 ; Strip most significant digit (9) before sending
 ;
 ;stripmsd=1
 ;callerid=asreceived
 ;group=0
 ;signalling=fxs_ls
 ;channel => 45
 ;signalling=fxo_ls
 ;group=1
 ;callerid="Joe Schmoe" <(256) 428-6131>
 ;channel => 25
 ;callerid="Megan May" <(256) 428-6132>
 ;channel => 26
 ;callerid="Suzy Queue" <(256) 428-6233>
 ;channel => 27
 ;callerid="Larry Moe" <(256) 428-6234>
 ;channel => 28
 ;
 ; Sample PRI (CPE) config:  Specify the switchtype, the signalling as either
 ; pri_cpe or pri_net for CPE or Network termination, and generally you will
 ; want to create a single "group" for all channels of the PRI.
 ;
 ; switchtype = national
 ; signalling = pri_cpe
 ; group = 2
 ; channel => 1-23
 ;
 ;  Used for distinctive ring support for x100p.
 ;  You can see the dringX patterns is to set any one of the dringXcontext fields
 ;  and they will be printed on the console when an inbound call comes in.
 ;
 ;dring1=95,0,0
 ;dring1context=internal1
 ;dring2=325,95,0
 ;dring2context=internal2
 ; If no pattern is matched here is where we go.
 ;context=default
 ;channel => 1

OpenPKG Specs / annotate

asterisk/zapata.conf@f4a0b439d0fb (annotated)

asterisk/zapata.conf