OpenPKG Specs: clamav/rc.clamav@4a34d7a82eab

Rework package yet again, correcting and introducing new buildconf logic:
Conditionally disable bootstrap stage comparison correctly, correct
english grammar, better find system as(1) and ld(1), indotruce detailed
optimization option messages, more completely guess cpu types, allow
profiled bootstrapping without a preinstalled GCC because many other
compilers have long since implemented 64-bit arithmetic, instruct make
to build sequentially (not in sparallel) when building a profiled
bootstrap as GCC online documents recommend, and generally improve
comment blocks.

The single most important correction in this changeset relates to the
GCC changed optimization policy since at least GCC 4.5, in which -march
is always passed and not always correctly guessed. In the case of this
package, allowing GCC to guess the architecture leads to wild build
errors at various subcomponents (zlib, libgcc, libiberty...) and
bootstrap stages. It seems quite platform specific, and the safest
approach to correcting this seems to be explicitly always specifying the
-march argument when bootstrapping GCC. Because the best choice 'native'
is not available when bootstrapping using a foreign (non GCC) compiler,
a guess is made according to rpmmacros l_platform in that case.

It is questionable as to whether these recent optimization changes
on the part of GCC or this package are compatible with each other,
or if either are complete or correct at all. At least applying these
corrections allows this package to build again in most cases test.

     1 #!@l_prefix@/bin/openpkg rc

     2 ##

     3 ##  rc.clamav -- Run-Commands

     4 ##

     6 %config

     7     clamav_enable="$openpkg_rc_def"

     8     clamav_daemons="clamd clamav-milter"

     9     clamav_clamd_flags=""

    10     clamav_clamav_milter_flags=""

    11     clamav_update="daily"

    12     clamav_log_prolog="true"

    13     clamav_log_epilog="true"

    14     clamav_log_numfiles="10"

    15     clamav_log_minsize="1M"

    16     clamav_log_complevel="9"

    18 %common

    19     clamav_cfgfile="@l_prefix@/etc/clamav/clamd.conf"

    20     clamav_milter_cfgfile="@l_prefix@/etc/clamav/clamav-milter.conf"

    21     clamav_pidfile_clamd="@l_prefix@/var/clamav/clamd.pid"

    22     clamav_pidfile_clamav_milter="@l_prefix@/var/clamav/clamav-milter.pid"

    23     clamav_signal () {

    24         [ -f $clamav_pidfile_clamd ] \

    25             && kill -$1 `cat $clamav_pidfile_clamd`

    26         local rc_clamav_clamd=$?

    27         [ -f $clamav_pidfile_clamav_milter ] \

    28             && kill -$1 `cat $clamav_pidfile_clamav_milter`

    29         local rc_clamav_clamav_milter=$?

    30         [    $rc_clamav_clamd         -eq 0 \

    31           -o $rc_clamav_clamav_milter -eq 0 ]

    32     }

    34 %status -u @l_rusr@ -o

    35     clamav_usable="unknown"

    36     clamav_active="no"

    37     rcService clamav enable yes && \

    38         clamav_signal 0 && clamav_active="yes"

    39     echo "clamav_enable=\"$clamav_enable\""

    40     echo "clamav_usable=\"$clamav_usable\""

    41     echo "clamav_active=\"$clamav_active\""

    43 %start -u @l_rusr@

    44     rcService clamav enable yes || exit 0

    45     rcService clamav active yes && exit 0

    46     for daemon in $clamav_daemons; do

    47         if [ ".$daemon" = ".clamd" ]; then

    48             @l_prefix@/sbin/clamd \

    49                 --config-file=$clamav_cfgfile \

    50                 $clamav_clamd_flags

    51         elif [ ".$daemon" = ".clamav-milter" -a -x @l_prefix@/sbin/clamav-milter ]; then

    52             ( umask 002

    53               @l_prefix@/sbin/clamav-milter \

    54                   --config-file=$clamav_milter_cfgfile \

    55                   $clamav_clamav_milter_flags

    56              ) || exit $?

    57         fi

    58     done

    60 %stop -u @l_rusr@

    61     rcService clamav enable yes || exit 0

    62     rcService clamav active no && exit 0

    63     clamav_signal TERM

    64     rm -f $clamav_pidfile_clamd 2>/dev/null || true

    65     rm -f $clamav_pidfile_clamav_milter 2>/dev/null || true

    67 %restart -u @l_rusr@

    68     rcService clamav enable yes || exit 0

    69     rcService clamav active no && exit 0

    70     rc clamav stop

    71     sleep 2

    72     rc clamav start

    74 %quarterly -u @l_rusr@

    75     rcService clamav enable yes || exit 0

    76     if [ ".$clamav_update" = .quarterly ]; then

    77         @l_prefix@/bin/freshclam

    78         if [ $? -ge 10 ]; then exit $?; fi

    79     fi

    81 %hourly -u @l_rusr@

    82     rcService clamav enable yes || exit 0

    83     if [ ".$clamav_update" = .hourly ]; then

    84         @l_prefix@/bin/freshclam

    85         if [ $? -ge 10 ]; then exit $?; fi

    86     fi

    88 %daily -u @l_rusr@

    89     rcService clamav enable yes || exit 0

    90     if [ ".$clamav_update" = .daily ]; then

    91         @l_prefix@/bin/freshclam

    92         if [ $? -ge 10 ]; then exit $?; fi

    93     fi

    94     logfiles=""

    95     for daemon in freshclam $clamav_daemons; do

    96         logfiles="$logfiles @l_prefix@/var/clamav/$daemon.log"

    97     done

    98     shtool rotate -f \

    99         -n $clamav_log_numfiles -s $clamav_log_minsize -d \

   100         -z $clamav_log_complevel -o @l_rusr@ -g @l_rgrp@ -m 644 \

   101         -P "$clamav_log_prolog" \

   102         -E "$clamav_log_epilog; rc clamav restart" \

   103         $logfiles

   105 %weekly -u @l_rusr@

   106     rcService clamav enable yes || exit 0

   107     if [ ".$clamav_update" = .weekly ]; then

   108         @l_prefix@/bin/freshclam

   109         if [ $? -ge 10 ]; then exit $?; fi

   110     fi

OpenPKG Specs / file revision

clamav/rc.clamav@4a34d7a82eab

clamav/rc.clamav