The Tor Browser: dom/system/gonk/android_audio/EffectApi.h@6474c204b198 (annotated)

dom/system/gonk/android_audio/EffectApi.h@6474c204b198 (annotated)

dom/system/gonk/android_audio/EffectApi.h

Wed, 31 Dec 2014 06:09:35 +0100

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Wed, 31 Dec 2014 06:09:35 +0100
changeset 0: 6474c204b198
permissions: -rw-r--r--

Cloned upstream origin tor-browser at tor-browser-31.3.0esr-4.5-1-build1
revision ID fc1c9ff7c1b2defdbc039f12214767608f46423f for hacking purpose.

 /*
  * Copyright (C) 2010 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #ifndef ANDROID_EFFECTAPI_H_
 #define ANDROID_EFFECTAPI_H_
 #include <errno.h>
 #include <stdint.h>
 #include <sys/types.h>
 #if __cplusplus
 extern "C" {
 #endif
 /////////////////////////////////////////////////
 //      Effect control interface
 /////////////////////////////////////////////////
 // The effect control interface is exposed by each effect engine implementation. It consists of
 // a set of functions controlling the configuration, activation and process of the engine.
 // The functions are grouped in a structure of type effect_interface_s:
 //    struct effect_interface_s {
 //        effect_process_t process;
 //        effect_command_t command;
 //    };
 // effect_interface_t: Effect control interface handle.
 // The effect_interface_t serves two purposes regarding the implementation of the effect engine:
 // - 1 it is the address of a pointer to an effect_interface_s structure where the functions
 // of the effect control API for a particular effect are located.
 // - 2 it is the address of the context of a particular effect instance.
 // A typical implementation in the effect library would define a structure as follows:
 // struct effect_module_s {
 //        const struct effect_interface_s *itfe;
 //        effect_config_t config;
 //        effect_context_t context;
 // }
 // The implementation of EffectCreate() function would then allocate a structure of this
 // type and return its address as effect_interface_t
 typedef struct effect_interface_s **effect_interface_t;
 // Effect API version 1.0
 #define EFFECT_API_VERSION 0x0100 // Format 0xMMmm MM: Major version, mm: minor version
 // Maximum length of character strings in structures defines by this API.
 #define EFFECT_STRING_LEN_MAX 64
 //
 //--- Effect descriptor structure effect_descriptor_t
 //
 // Unique effect ID (can be generated from the following site:
 //  http://www.itu.int/ITU-T/asn1/uuid.html)
 // This format is used for both "type" and "uuid" fields of the effect descriptor structure.
 // - When used for effect type and the engine is implementing and effect corresponding to a standard
 // OpenSL ES interface, this ID must be the one defined in OpenSLES_IID.h for that interface.
 // - When used as uuid, it should be a unique UUID for this particular implementation.
 typedef struct effect_uuid_s {
     uint32_t timeLow;
     uint16_t timeMid;
     uint16_t timeHiAndVersion;
     uint16_t clockSeq;
     uint8_t node[6];
 } effect_uuid_t;
 // NULL UUID definition (matches SL_IID_NULL_)
 #define EFFECT_UUID_INITIALIZER { 0xec7178ec, 0xe5e1, 0x4432, 0xa3f4, \
                                   { 0x46, 0x57, 0xe6, 0x79, 0x52, 0x10 } }
 static const effect_uuid_t EFFECT_UUID_NULL_ = EFFECT_UUID_INITIALIZER;
 const effect_uuid_t * const EFFECT_UUID_NULL = &EFFECT_UUID_NULL_;
 const char * const EFFECT_UUID_NULL_STR = "ec7178ec-e5e1-4432-a3f4-4657e6795210";
 // The effect descriptor contains necessary information to facilitate the enumeration of the effect
 // engines present in a library.
 typedef struct effect_descriptor_s {
     effect_uuid_t type;     // UUID of to the OpenSL ES interface implemented by this effect
     effect_uuid_t uuid;     // UUID for this particular implementation
     uint16_t apiVersion;    // Version of the effect API implemented: matches EFFECT_API_VERSION
     uint32_t flags;         // effect engine capabilities/requirements flags (see below)
     uint16_t cpuLoad;       // CPU load indication (see below)
     uint16_t memoryUsage;   // Data Memory usage (see below)
     char    name[EFFECT_STRING_LEN_MAX];   // human readable effect name
     char    implementor[EFFECT_STRING_LEN_MAX];    // human readable effect implementor name
 } effect_descriptor_t;
 // CPU load and memory usage indication: each effect implementation must provide an indication of
 // its CPU and memory usage for the audio effect framework to limit the number of effects
 // instantiated at a given time on a given platform.
 // The CPU load is expressed in 0.1 MIPS units as estimated on an ARM9E core (ARMv5TE) with 0 WS.
 // The memory usage is expressed in KB and includes only dynamically allocated memory
 // Definitions for flags field of effect descriptor.
 //  +---------------------------+-----------+-----------------------------------
 //  | description               | bits      | values
 //  +---------------------------+-----------+-----------------------------------
 //  | connection mode           | 0..1      | 0 insert: after track process
 //  |                           |           | 1 auxiliary: connect to track auxiliary
 //  |                           |           |  output and use send level
 //  |                           |           | 2 replace: replaces track process function;
 //  |                           |           |   must implement SRC, volume and mono to stereo.
 //  |                           |           | 3 reserved
 //  +---------------------------+-----------+-----------------------------------
 //  | insertion preference      | 2..4      | 0 none
 //  |                           |           | 1 first of the chain
 //  |                           |           | 2 last of the chain
 //  |                           |           | 3 exclusive (only effect in the insert chain)
 //  |                           |           | 4..7 reserved
 //  +---------------------------+-----------+-----------------------------------
 //  | Volume management         | 5..6      | 0 none
 //  |                           |           | 1 implements volume control
 //  |                           |           | 2 requires volume indication
 //  |                           |           | 3 reserved
 //  +---------------------------+-----------+-----------------------------------
 //  | Device indication         | 7..8      | 0 none
 //  |                           |           | 1 requires device updates
 //  |                           |           | 2..3 reserved
 //  +---------------------------+-----------+-----------------------------------
 //  | Sample input mode         | 9..10     | 0 direct: process() function or EFFECT_CMD_CONFIGURE
 //  |                           |           |   command must specify a buffer descriptor
 //  |                           |           | 1 provider: process() function uses the
 //  |                           |           |   bufferProvider indicated by the
 //  |                           |           |   EFFECT_CMD_CONFIGURE command to request input.
 //  |                           |           |   buffers.
 //  |                           |           | 2 both: both input modes are supported
 //  |                           |           | 3 reserved
 //  +---------------------------+-----------+-----------------------------------
 //  | Sample output mode        | 11..12    | 0 direct: process() function or EFFECT_CMD_CONFIGURE
 //  |                           |           |   command must specify a buffer descriptor
 //  |                           |           | 1 provider: process() function uses the
 //  |                           |           |   bufferProvider indicated by the
 //  |                           |           |   EFFECT_CMD_CONFIGURE command to request output
 //  |                           |           |   buffers.
 //  |                           |           | 2 both: both output modes are supported
 //  |                           |           | 3 reserved
 //  +---------------------------+-----------+-----------------------------------
 //  | Hardware acceleration     | 13..15    | 0 No hardware acceleration
 //  |                           |           | 1 non tunneled hw acceleration: the process() function
 //  |                           |           |   reads the samples, send them to HW accelerated
 //  |                           |           |   effect processor, reads back the processed samples
 //  |                           |           |   and returns them to the output buffer.
 //  |                           |           | 2 tunneled hw acceleration: the process() function is
 //  |                           |           |   transparent. The effect interface is only used to
 //  |                           |           |   control the effect engine. This mode is relevant for
 //  |                           |           |   global effects actually applied by the audio
 //  |                           |           |   hardware on the output stream.
 //  +---------------------------+-----------+-----------------------------------
 //  | Audio Mode indication     | 16..17    | 0 none
 //  |                           |           | 1 requires audio mode updates
 //  |                           |           | 2..3 reserved
 //  +---------------------------+-----------+-----------------------------------
 // Insert mode
 #define EFFECT_FLAG_TYPE_MASK           0x00000003
 #define EFFECT_FLAG_TYPE_INSERT         0x00000000
 #define EFFECT_FLAG_TYPE_AUXILIARY      0x00000001
 #define EFFECT_FLAG_TYPE_REPLACE        0x00000002
 // Insert preference
 #define EFFECT_FLAG_INSERT_MASK         0x0000001C
 #define EFFECT_FLAG_INSERT_ANY          0x00000000
 #define EFFECT_FLAG_INSERT_FIRST        0x00000004
 #define EFFECT_FLAG_INSERT_LAST         0x00000008
 #define EFFECT_FLAG_INSERT_EXCLUSIVE    0x0000000C
 // Volume control
 #define EFFECT_FLAG_VOLUME_MASK         0x00000060
 #define EFFECT_FLAG_VOLUME_CTRL         0x00000020
 #define EFFECT_FLAG_VOLUME_IND          0x00000040
 #define EFFECT_FLAG_VOLUME_NONE         0x00000000
 // Device indication
 #define EFFECT_FLAG_DEVICE_MASK         0x00000180
 #define EFFECT_FLAG_DEVICE_IND          0x00000080
 #define EFFECT_FLAG_DEVICE_NONE         0x00000000
 // Sample input modes
 #define EFFECT_FLAG_INPUT_MASK          0x00000600
 #define EFFECT_FLAG_INPUT_DIRECT        0x00000000
 #define EFFECT_FLAG_INPUT_PROVIDER      0x00000200
 #define EFFECT_FLAG_INPUT_BOTH          0x00000400
 // Sample output modes
 #define EFFECT_FLAG_OUTPUT_MASK          0x00001800
 #define EFFECT_FLAG_OUTPUT_DIRECT        0x00000000
 #define EFFECT_FLAG_OUTPUT_PROVIDER      0x00000800
 #define EFFECT_FLAG_OUTPUT_BOTH          0x00001000
 // Hardware acceleration mode
 #define EFFECT_FLAG_HW_ACC_MASK          0x00006000
 #define EFFECT_FLAG_HW_ACC_SIMPLE        0x00002000
 #define EFFECT_FLAG_HW_ACC_TUNNEL        0x00004000
 // Audio mode indication
 #define EFFECT_FLAG_AUDIO_MODE_MASK      0x00018000
 #define EFFECT_FLAG_AUDIO_MODE_IND       0x00008000
 #define EFFECT_FLAG_AUDIO_MODE_NONE      0x00000000
 // Forward definition of type audio_buffer_t
 typedef struct audio_buffer_s audio_buffer_t;
 ////////////////////////////////////////////////////////////////////////////////
 //
 //    Function:       process
 //
 //    Description:    Effect process function. Takes input samples as specified
 //          (count and location) in input buffer descriptor and output processed
 //          samples as specified in output buffer descriptor. If the buffer descriptor
 //          is not specified the function must use either the buffer or the
 //          buffer provider function installed by the EFFECT_CMD_CONFIGURE command.
 //          The effect framework will call the process() function after the EFFECT_CMD_ENABLE
 //          command is received and until the EFFECT_CMD_DISABLE is received. When the engine
 //          receives the EFFECT_CMD_DISABLE command it should turn off the effect gracefully
 //          and when done indicate that it is OK to stop calling the process() function by
 //          returning the -ENODATA status.
 //
 //    NOTE: the process() function implementation should be "real-time safe" that is
 //      it should not perform blocking calls: malloc/free, sleep, read/write/open/close,
 //      pthread_cond_wait/pthread_mutex_lock...
 //
 //    Input:
 //          effect_interface_t: handle to the effect interface this function
 //              is called on.
 //          inBuffer:   buffer descriptor indicating where to read samples to process.
 //              If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command.
 //
 //          inBuffer:   buffer descriptor indicating where to write processed samples.
 //              If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command.
 //
 //    Output:
 //        returned value:    0 successful operation
 //                          -ENODATA the engine has finished the disable phase and the framework
 //                                  can stop calling process()
 //                          -EINVAL invalid interface handle or
 //                                  invalid input/output buffer description
 ////////////////////////////////////////////////////////////////////////////////
 typedef int32_t (*effect_process_t)(effect_interface_t self,
                                     audio_buffer_t *inBuffer,
                                     audio_buffer_t *outBuffer);
 ////////////////////////////////////////////////////////////////////////////////
 //
 //    Function:       command
 //
 //    Description:    Send a command and receive a response to/from effect engine.
 //
 //    Input:
 //          effect_interface_t: handle to the effect interface this function
 //              is called on.
 //          cmdCode:    command code: the command can be a standardized command defined in
 //              effect_command_e (see below) or a proprietary command.
 //          cmdSize:    size of command in bytes
 //          pCmdData:   pointer to command data
 //          pReplyData: pointer to reply data
 //
 //    Input/Output:
 //          replySize: maximum size of reply data as input
 //                      actual size of reply data as output
 //
 //    Output:
 //          returned value: 0       successful operation
 //                          -EINVAL invalid interface handle or
 //                                  invalid command/reply size or format according to command code
 //              The return code should be restricted to indicate problems related to the this
 //              API specification. Status related to the execution of a particular command should be
 //              indicated as part of the reply field.
 //
 //          *pReplyData updated with command response
 //
 ////////////////////////////////////////////////////////////////////////////////
 typedef int32_t (*effect_command_t)(effect_interface_t self,
                                     uint32_t cmdCode,
                                     uint32_t cmdSize,
                                     void *pCmdData,
                                     uint32_t *replySize,
                                     void *pReplyData);
 // Effect control interface definition
 struct effect_interface_s {
     effect_process_t process;
     effect_command_t command;
 };
 //
 //--- Standardized command codes for command() function
 //
 enum effect_command_e {
    EFFECT_CMD_INIT,                 // initialize effect engine
    EFFECT_CMD_CONFIGURE,            // configure effect engine (see effect_config_t)
    EFFECT_CMD_RESET,                // reset effect engine
    EFFECT_CMD_ENABLE,               // enable effect process
    EFFECT_CMD_DISABLE,              // disable effect process
    EFFECT_CMD_SET_PARAM,            // set parameter immediately (see effect_param_t)
    EFFECT_CMD_SET_PARAM_DEFERRED,   // set parameter deferred
    EFFECT_CMD_SET_PARAM_COMMIT,     // commit previous set parameter deferred
    EFFECT_CMD_GET_PARAM,            // get parameter
    EFFECT_CMD_SET_DEVICE,           // set audio device (see audio_device_e)
    EFFECT_CMD_SET_VOLUME,           // set volume
    EFFECT_CMD_SET_AUDIO_MODE,       // set the audio mode (normal, ring, ...)
    EFFECT_CMD_FIRST_PROPRIETARY = 0x10000 // first proprietary command code
 };
 //==================================================================================================
 // command: EFFECT_CMD_INIT
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Initialize effect engine: All configurations return to default
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: 0
 //  data: N/A
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: sizeof(int)
 //  data: status
 //==================================================================================================
 // command: EFFECT_CMD_CONFIGURE
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Apply new audio parameters configurations for input and output buffers
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: sizeof(effect_config_t)
 //  data: effect_config_t
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: sizeof(int)
 //  data: status
 //==================================================================================================
 // command: EFFECT_CMD_RESET
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Reset the effect engine. Keep configuration but resets state and buffer content
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: 0
 //  data: N/A
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: 0
 //  data: N/A
 //==================================================================================================
 // command: EFFECT_CMD_ENABLE
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Enable the process. Called by the framework before the first call to process()
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: 0
 //  data: N/A
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: sizeof(int)
 //  data: status
 //==================================================================================================
 // command: EFFECT_CMD_DISABLE
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Disable the process. Called by the framework after the last call to process()
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: 0
 //  data: N/A
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: sizeof(int)
 //  data: status
 //==================================================================================================
 // command: EFFECT_CMD_SET_PARAM
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Set a parameter and apply it immediately
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: sizeof(effect_param_t) + size of param and value
 //  data: effect_param_t + param + value. See effect_param_t definition below for value offset
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: sizeof(int)
 //  data: status
 //==================================================================================================
 // command: EFFECT_CMD_SET_PARAM_DEFERRED
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Set a parameter but apply it only when receiving EFFECT_CMD_SET_PARAM_COMMIT command
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: sizeof(effect_param_t) + size of param and value
 //  data: effect_param_t + param + value. See effect_param_t definition below for value offset
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: 0
 //  data: N/A
 //==================================================================================================
 // command: EFFECT_CMD_SET_PARAM_COMMIT
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Apply all previously received EFFECT_CMD_SET_PARAM_DEFERRED commands
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: 0
 //  data: N/A
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: sizeof(int)
 //  data: status
 //==================================================================================================
 // command: EFFECT_CMD_GET_PARAM
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Get a parameter value
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: sizeof(effect_param_t) + size of param
 //  data: effect_param_t + param
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: sizeof(effect_param_t) + size of param and value
 //  data: effect_param_t + param + value. See effect_param_t definition below for value offset
 //==================================================================================================
 // command: EFFECT_CMD_SET_DEVICE
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Set the rendering device the audio output path is connected to. See audio_device_e for device
 //  values.
 //  The effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to receive this
 //  command when the device changes
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: sizeof(uint32_t)
 //  data: audio_device_e
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: 0
 //  data: N/A
 //==================================================================================================
 // command: EFFECT_CMD_SET_VOLUME
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Set and get volume. Used by audio framework to delegate volume control to effect engine.
 //  The effect implementation must set EFFECT_FLAG_VOLUME_IND or EFFECT_FLAG_VOLUME_CTRL flag in
 //  its descriptor to receive this command before every call to process() function
 //  If EFFECT_FLAG_VOLUME_CTRL flag is set in the effect descriptor, the effect engine must return
 //  the volume that should be applied before the effect is processed. The overall volume (the volume
 //  actually applied by the effect engine multiplied by the returned value) should match the value
 //  indicated in the command.
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: n * sizeof(uint32_t)
 //  data: volume for each channel defined in effect_config_t for output buffer expressed in
 //      8.24 fixed point format
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: n * sizeof(uint32_t) / 0
 //  data: - if EFFECT_FLAG_VOLUME_CTRL is set in effect descriptor:
 //              volume for each channel defined in effect_config_t for output buffer expressed in
 //              8.24 fixed point format
 //        - if EFFECT_FLAG_VOLUME_CTRL is not set in effect descriptor:
 //              N/A
 //  It is legal to receive a null pointer as pReplyData in which case the effect framework has
 //  delegated volume control to another effect
 //==================================================================================================
 // command: EFFECT_CMD_SET_AUDIO_MODE
 //--------------------------------------------------------------------------------------------------
 // description:
 //  Set the audio mode. The effect implementation must set EFFECT_FLAG_AUDIO_MODE_IND flag in its
 //  descriptor to receive this command when the audio mode changes.
 //--------------------------------------------------------------------------------------------------
 // command format:
 //  size: sizeof(uint32_t)
 //  data: audio_mode_e
 //--------------------------------------------------------------------------------------------------
 // reply format:
 //  size: 0
 //  data: N/A
 //==================================================================================================
 // command: EFFECT_CMD_FIRST_PROPRIETARY
 //--------------------------------------------------------------------------------------------------
 // description:
 //  All proprietary effect commands must use command codes above this value. The size and format of
 //  command and response fields is free in this case
 //==================================================================================================
 // Audio buffer descriptor used by process(), bufferProvider() functions and buffer_config_t
 // structure. Multi-channel audio is always interleaved. The channel order is from LSB to MSB with
 // regard to the channel mask definition in audio_channels_e e.g :
 // Stereo: left, right
 // 5 point 1: front left, front right, front center, low frequency, back left, back right
 // The buffer size is expressed in frame count, a frame being composed of samples for all
 // channels at a given time. Frame size for unspecified format (AUDIO_FORMAT_OTHER) is 8 bit by
 // definition
 struct audio_buffer_s {
     size_t   frameCount;        // number of frames in buffer
     union {
         void*       raw;        // raw pointer to start of buffer
         int32_t*    s32;        // pointer to signed 32 bit data at start of buffer
         int16_t*    s16;        // pointer to signed 16 bit data at start of buffer
         uint8_t*    u8;         // pointer to unsigned 8 bit data at start of buffer
     };
 };
 // The buffer_provider_s structure contains functions that can be used
 // by the effect engine process() function to query and release input
 // or output audio buffer.
 // The getBuffer() function is called to retrieve a buffer where data
 // should read from or written to by process() function.
 // The releaseBuffer() function MUST be called when the buffer retrieved
 // with getBuffer() is not needed anymore.
 // The process function should use the buffer provider mechanism to retrieve
 // input or output buffer if the inBuffer or outBuffer passed as argument is NULL
 // and the buffer configuration (buffer_config_t) given by the EFFECT_CMD_CONFIGURE
 // command did not specify an audio buffer.
 typedef int32_t (* buffer_function_t)(void *cookie, audio_buffer_t *buffer);
 typedef struct buffer_provider_s {
     buffer_function_t getBuffer;       // retrieve next buffer
     buffer_function_t releaseBuffer;   // release used buffer
     void       *cookie;                // for use by client of buffer provider functions
 } buffer_provider_t;
 // The buffer_config_s structure specifies the input or output audio format
 // to be used by the effect engine. It is part of the effect_config_t
 // structure that defines both input and output buffer configurations and is
 // passed by the EFFECT_CMD_CONFIGURE command.
 typedef struct buffer_config_s {
     audio_buffer_t  buffer;     // buffer for use by process() function if not passed explicitly
     uint32_t   samplingRate;    // sampling rate
     uint32_t   channels;        // channel mask (see audio_channels_e)
     buffer_provider_t bufferProvider;   // buffer provider
     uint8_t    format;          // Audio format  (see audio_format_e)
     uint8_t    accessMode;      // read/write or accumulate in buffer (effect_buffer_access_e)
     uint16_t   mask;            // indicates which of the above fields is valid
 } buffer_config_t;
 // Sample format
 enum audio_format_e {
     SAMPLE_FORMAT_PCM_S15,   // PCM signed 16 bits
     SAMPLE_FORMAT_PCM_U8,    // PCM unsigned 8 bits
     SAMPLE_FORMAT_PCM_S7_24, // PCM signed 7.24 fixed point representation
     SAMPLE_FORMAT_OTHER      // other format (e.g. compressed)
 };
 // Channel mask
 enum audio_channels_e {
     CHANNEL_FRONT_LEFT = 0x1,                   // front left channel
     CHANNEL_FRONT_RIGHT = 0x2,                  // front right channel
     CHANNEL_FRONT_CENTER = 0x4,                // front center channel
     CHANNEL_LOW_FREQUENCY = 0x8,               // low frequency channel
     CHANNEL_BACK_LEFT = 0x10,                   // back left channel
     CHANNEL_BACK_RIGHT = 0x20,                  // back right channel
     CHANNEL_FRONT_LEFT_OF_CENTER = 0x40,       // front left of center channel
     CHANNEL_FRONT_RIGHT_OF_CENTER = 0x80,      // front right of center channel
     CHANNEL_BACK_CENTER = 0x100,                // back center channel
     CHANNEL_MONO = CHANNEL_FRONT_LEFT,
     CHANNEL_STEREO = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT),
     CHANNEL_QUAD = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT |
             CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT),
     CHANNEL_SURROUND = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT |
             CHANNEL_FRONT_CENTER | CHANNEL_BACK_CENTER),
     CHANNEL_5POINT1 = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT |
             CHANNEL_FRONT_CENTER | CHANNEL_LOW_FREQUENCY | CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT),
     CHANNEL_7POINT1 = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT |
             CHANNEL_FRONT_CENTER | CHANNEL_LOW_FREQUENCY | CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT |
             CHANNEL_FRONT_LEFT_OF_CENTER | CHANNEL_FRONT_RIGHT_OF_CENTER),
 };
 // Render device
 enum audio_device_e {
     DEVICE_EARPIECE = 0x1,                      // earpiece
     DEVICE_SPEAKER = 0x2,                       // speaker
     DEVICE_WIRED_HEADSET = 0x4,                 // wired headset, with microphone
     DEVICE_WIRED_HEADPHONE = 0x8,               // wired headphone, without microphone
     DEVICE_BLUETOOTH_SCO = 0x10,                // generic bluetooth SCO
     DEVICE_BLUETOOTH_SCO_HEADSET = 0x20,        // bluetooth SCO headset
     DEVICE_BLUETOOTH_SCO_CARKIT = 0x40,         // bluetooth SCO car kit
     DEVICE_BLUETOOTH_A2DP = 0x80,               // generic bluetooth A2DP
     DEVICE_BLUETOOTH_A2DP_HEADPHONES = 0x100,   // bluetooth A2DP headphones
     DEVICE_BLUETOOTH_A2DP_SPEAKER = 0x200,      // bluetooth A2DP speakers
     DEVICE_AUX_DIGITAL = 0x400,                 // digital output
     DEVICE_EXTERNAL_SPEAKER = 0x800             // external speaker (stereo and High quality)
 };
 #if ANDROID_VERSION < 17
 // Audio mode
 enum audio_mode_e {
     AUDIO_MODE_NORMAL,      // device idle
     AUDIO_MODE_RINGTONE,    // device ringing
     AUDIO_MODE_IN_CALL      // audio call connected (VoIP or telephony)
 };
 #endif
 // Values for "accessMode" field of buffer_config_t:
 //   overwrite, read only, accumulate (read/modify/write)
 enum effect_buffer_access_e {
     EFFECT_BUFFER_ACCESS_WRITE,
     EFFECT_BUFFER_ACCESS_READ,
     EFFECT_BUFFER_ACCESS_ACCUMULATE
 };
 // Values for bit field "mask" in buffer_config_t. If a bit is set, the corresponding field
 // in buffer_config_t must be taken into account when executing the EFFECT_CMD_CONFIGURE command
 #define EFFECT_CONFIG_BUFFER    0x0001  // buffer field must be taken into account
 #define EFFECT_CONFIG_SMP_RATE  0x0002  // samplingRate field must be taken into account
 #define EFFECT_CONFIG_CHANNELS  0x0004  // channels field must be taken into account
 #define EFFECT_CONFIG_FORMAT    0x0008  // format field must be taken into account
 #define EFFECT_CONFIG_ACC_MODE  0x0010  // accessMode field must be taken into account
 #define EFFECT_CONFIG_PROVIDER  0x0020  // bufferProvider field must be taken into account
 #define EFFECT_CONFIG_ALL (EFFECT_CONFIG_BUFFER | EFFECT_CONFIG_SMP_RATE | \
                            EFFECT_CONFIG_CHANNELS | EFFECT_CONFIG_FORMAT | \
                            EFFECT_CONFIG_ACC_MODE | EFFECT_CONFIG_PROVIDER)
 // effect_config_s structure describes the format of the pCmdData argument of EFFECT_CMD_CONFIGURE
 // command to configure audio parameters and buffers for effect engine input and output.
 typedef struct effect_config_s {
     buffer_config_t   inputCfg;
     buffer_config_t   outputCfg;;
 } effect_config_t;
 // effect_param_s structure describes the format of the pCmdData argument of EFFECT_CMD_SET_PARAM
 // command and pCmdData and pReplyData of EFFECT_CMD_GET_PARAM command.
 // psize and vsize represent the actual size of parameter and value.
 //
 // NOTE: the start of value field inside the data field is always on a 32 bit boundary:
 //
 //  +-----------+
 //  | status    | sizeof(int)
 //  +-----------+
 //  | psize     | sizeof(int)
 //  +-----------+
 //  | vsize     | sizeof(int)
 //  +-----------+
 //  |           |   |           |
 //  ~ parameter ~   > psize     |
 //  |           |   |           >  ((psize - 1)/sizeof(int) + 1) * sizeof(int)
 //  +-----------+               |
 //  | padding   |               |
 //  +-----------+
 //  |           |   |
 //  ~ value     ~   > vsize
 //  |           |   |
 //  +-----------+
 typedef struct effect_param_s {
     int32_t     status;     // Transaction status (unused for command, used for reply)
     uint32_t    psize;      // Parameter size
     uint32_t    vsize;      // Value size
     char        data[];     // Start of Parameter + Value data
 } effect_param_t;
 /////////////////////////////////////////////////
 //      Effect library interface
 /////////////////////////////////////////////////
 // An effect library is required to implement and expose the following functions
 // to enable effect enumeration and instantiation. The name of these functions must be as
 // specified here as the effect framework will get the function address with dlsym():
 //
 // - effect_QueryNumberEffects_t EffectQueryNumberEffects;
 // - effect_QueryEffect_t EffectQueryEffect;
 // - effect_CreateEffect_t EffectCreate;
 // - effect_ReleaseEffect_t EffectRelease;
 ////////////////////////////////////////////////////////////////////////////////
 //
 //    Function:       EffectQueryNumberEffects
 //
 //    Description:    Returns the number of different effects exposed by the
 //          library. Each effect must have a unique effect uuid (see
 //          effect_descriptor_t). This function together with EffectQueryEffect()
 //          is used to enumerate all effects present in the library.
 //
 //    Input/Output:
 //          pNumEffects:    address where the number of effects should be returned.
 //
 //    Output:
 //        returned value:    0          successful operation.
 //                          -ENODEV     library failed to initialize
 //                          -EINVAL     invalid pNumEffects
 //        *pNumEffects:     updated with number of effects in library
 //
 ////////////////////////////////////////////////////////////////////////////////
 typedef int32_t (*effect_QueryNumberEffects_t)(uint32_t *pNumEffects);
 ////////////////////////////////////////////////////////////////////////////////
 //
 //    Function:       EffectQueryEffect
 //
 //    Description:    Returns the descriptor of the effect engine which index is
 //          given as first argument.
 //          See effect_descriptor_t for details on effect descriptors.
 //          This function together with EffectQueryNumberEffects() is used to enumerate all
 //          effects present in the library. The enumeration sequence is:
 //              EffectQueryNumberEffects(&num_effects);
 //              for (i = 0; i < num_effects; i++)
 //                  EffectQueryEffect(i,...);
 //
 //    Input/Output:
 //          index:          index of the effect
 //          pDescriptor:    address where to return the effect descriptor.
 //
 //    Output:
 //        returned value:    0          successful operation.
 //                          -ENODEV     library failed to initialize
 //                          -EINVAL     invalid pDescriptor or index
 //                          -ENOSYS     effect list has changed since last execution of
 //                                      EffectQueryNumberEffects()
 //                          -ENOENT     no more effect available
 //        *pDescriptor:     updated with the effect descriptor.
 //
 ////////////////////////////////////////////////////////////////////////////////
 typedef int32_t (*effect_QueryEffect_t)(uint32_t index,
                                         effect_descriptor_t *pDescriptor);
 ////////////////////////////////////////////////////////////////////////////////
 //
 //    Function:       EffectCreate
 //
 //    Description:    Creates an effect engine of the specified type and returns an
 //          effect control interface on this engine. The function will allocate the
 //          resources for an instance of the requested effect engine and return
 //          a handle on the effect control interface.
 //
 //    Input:
 //          uuid:    pointer to the effect uuid.
 //          sessionId:  audio session to which this effect instance will be attached. All effects
 //              created with the same session ID are connected in series and process the same signal
 //              stream. Knowing that two effects are part of the same effect chain can help the
 //              library implement some kind of optimizations.
 //          ioId:   identifies the output or input stream this effect is directed to at audio HAL.
 //              For future use especially with tunneled HW accelerated effects
 //
 //    Input/Output:
 //          pInterface:    address where to return the effect interface.
 //
 //    Output:
 //        returned value:    0          successful operation.
 //                          -ENODEV     library failed to initialize
 //                          -EINVAL     invalid pEffectUuid or pInterface
 //                          -ENOENT     no effect with this uuid found
 //        *pInterface:     updated with the effect interface handle.
 //
 ////////////////////////////////////////////////////////////////////////////////
 typedef int32_t (*effect_CreateEffect_t)(effect_uuid_t *uuid,
                                          int32_t sessionId,
                                          int32_t ioId,
                                          effect_interface_t *pInterface);
 ////////////////////////////////////////////////////////////////////////////////
 //
 //    Function:       EffectRelease
 //
 //    Description:    Releases the effect engine whose handle is given as argument.
 //          All resources allocated to this particular instance of the effect are
 //          released.
 //
 //    Input:
 //          interface:    handle on the effect interface to be released.
 //
 //    Output:
 //        returned value:    0          successful operation.
 //                          -ENODEV     library failed to initialize
 //                          -EINVAL     invalid interface handle
 //
 ////////////////////////////////////////////////////////////////////////////////
 typedef int32_t (*effect_ReleaseEffect_t)(effect_interface_t interface);
 #if __cplusplus
 }  // extern "C"
 #endif
 #endif /*ANDROID_EFFECTAPI_H_*/

The Tor Browser / annotate

dom/system/gonk/android_audio/EffectApi.h@6474c204b198 (annotated)

dom/system/gonk/android_audio/EffectApi.h