The Tor Browser: layout/generic/nsBlockFrame.cpp@6474c204b198 (annotated)

layout/generic/nsBlockFrame.cpp@6474c204b198 (annotated)

layout/generic/nsBlockFrame.cpp

Wed, 31 Dec 2014 06:09:35 +0100

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Wed, 31 Dec 2014 06:09:35 +0100
changeset 0: 6474c204b198
permissions: -rw-r--r--

Cloned upstream origin tor-browser at tor-browser-31.3.0esr-4.5-1-build1
revision ID fc1c9ff7c1b2defdbc039f12214767608f46423f for hacking purpose.

 /* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
 // vim:cindent:ts=2:et:sw=2:
 /* This Source Code Form is subject to the terms of the Mozilla Public
  * License, v. 2.0. If a copy of the MPL was not distributed with this
  * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
 /*
  * rendering object for CSS display:block, inline-block, and list-item
  * boxes, also used for various anonymous boxes
  */
 #include "nsBlockFrame.h"
 #include "mozilla/DebugOnly.h"
 #include "nsCOMPtr.h"
 #include "nsAbsoluteContainingBlock.h"
 #include "nsBlockReflowContext.h"
 #include "nsBlockReflowState.h"
 #include "nsBulletFrame.h"
 #include "nsLineBox.h"
 #include "nsLineLayout.h"
 #include "nsPlaceholderFrame.h"
 #include "nsStyleConsts.h"
 #include "nsFrameManager.h"
 #include "nsPresContext.h"
 #include "nsIPresShell.h"
 #include "nsStyleContext.h"
 #include "nsHTMLParts.h"
 #include "nsGkAtoms.h"
 #include "nsGenericHTMLElement.h"
 #include "nsAttrValueInlines.h"
 #include "prprf.h"
 #include "nsFloatManager.h"
 #include "prenv.h"
 #include "plstr.h"
 #include "nsError.h"
 #include "nsAutoPtr.h"
 #include "nsIScrollableFrame.h"
 #include <algorithm>
 #ifdef ACCESSIBILITY
 #include "nsIDOMHTMLDocument.h"
 #endif
 #include "nsLayoutUtils.h"
 #include "nsDisplayList.h"
 #include "nsCSSAnonBoxes.h"
 #include "nsCSSFrameConstructor.h"
 #include "nsRenderingContext.h"
 #include "TextOverflow.h"
 #include "nsIFrameInlines.h"
 #include "nsBidiPresUtils.h"
 static const int MIN_LINES_NEEDING_CURSOR = 20;
 static const char16_t kDiscCharacter = 0x2022;
 static const char16_t kCircleCharacter = 0x25e6;
 static const char16_t kSquareCharacter = 0x25aa;
 #define DISABLE_FLOAT_BREAKING_IN_COLUMNS
 using namespace mozilla;
 using namespace mozilla::css;
 using namespace mozilla::layout;
 #ifdef DEBUG
 #include "nsBlockDebugFlags.h"
 bool nsBlockFrame::gLamePaintMetrics;
 bool nsBlockFrame::gLameReflowMetrics;
 bool nsBlockFrame::gNoisy;
 bool nsBlockFrame::gNoisyDamageRepair;
 bool nsBlockFrame::gNoisyIntrinsic;
 bool nsBlockFrame::gNoisyReflow;
 bool nsBlockFrame::gReallyNoisyReflow;
 bool nsBlockFrame::gNoisyFloatManager;
 bool nsBlockFrame::gVerifyLines;
 bool nsBlockFrame::gDisableResizeOpt;
 int32_t nsBlockFrame::gNoiseIndent;
 struct BlockDebugFlags {
   const char* name;
   bool* on;
 };
 static const BlockDebugFlags gFlags[] = {
   { "reflow", &nsBlockFrame::gNoisyReflow },
   { "really-noisy-reflow", &nsBlockFrame::gReallyNoisyReflow },
   { "intrinsic", &nsBlockFrame::gNoisyIntrinsic },
   { "float-manager", &nsBlockFrame::gNoisyFloatManager },
   { "verify-lines", &nsBlockFrame::gVerifyLines },
   { "damage-repair", &nsBlockFrame::gNoisyDamageRepair },
   { "lame-paint-metrics", &nsBlockFrame::gLamePaintMetrics },
   { "lame-reflow-metrics", &nsBlockFrame::gLameReflowMetrics },
   { "disable-resize-opt", &nsBlockFrame::gDisableResizeOpt },
 };
 #define NUM_DEBUG_FLAGS (sizeof(gFlags) / sizeof(gFlags[0]))
 static void
 ShowDebugFlags()
 {
   printf("Here are the available GECKO_BLOCK_DEBUG_FLAGS:\n");
   const BlockDebugFlags* bdf = gFlags;
   const BlockDebugFlags* end = gFlags + NUM_DEBUG_FLAGS;
   for (; bdf < end; bdf++) {
     printf("  %s\n", bdf->name);
   }
   printf("Note: GECKO_BLOCK_DEBUG_FLAGS is a comma separated list of flag\n");
   printf("names (no whitespace)\n");
 }
 void
 nsBlockFrame::InitDebugFlags()
 {
   static bool firstTime = true;
   if (firstTime) {
     firstTime = false;
     char* flags = PR_GetEnv("GECKO_BLOCK_DEBUG_FLAGS");
     if (flags) {
       bool error = false;
       for (;;) {
         char* cm = PL_strchr(flags, ',');
         if (cm) *cm = '\0';
         bool found = false;
         const BlockDebugFlags* bdf = gFlags;
         const BlockDebugFlags* end = gFlags + NUM_DEBUG_FLAGS;
         for (; bdf < end; bdf++) {
           if (PL_strcasecmp(bdf->name, flags) == 0) {
             *(bdf->on) = true;
             printf("nsBlockFrame: setting %s debug flag on\n", bdf->name);
             gNoisy = true;
             found = true;
             break;
           }
         }
         if (!found) {
           error = true;
         }
         if (!cm) break;
         *cm = ',';
         flags = cm + 1;
       }
       if (error) {
         ShowDebugFlags();
       }
     }
   }
 }
 #endif
 // add in a sanity check for absurdly deep frame trees.  See bug 42138
 // can't just use IsFrameTreeTooDeep() because that method has side effects we don't want
 #define MAX_DEPTH_FOR_LIST_RENUMBERING 200  // 200 open displayable tags is pretty unrealistic
 //----------------------------------------------------------------------
 // Debugging support code
 #ifdef DEBUG
 const char* nsBlockFrame::kReflowCommandType[] = {
   "ContentChanged",
   "StyleChanged",
   "ReflowDirty",
   "Timeout",
   "UserDefined",
 };
 #endif
 #ifdef REALLY_NOISY_FIRST_LINE
 static void
 DumpStyleGeneaology(nsIFrame* aFrame, const char* gap)
 {
   fputs(gap, stdout);
   nsFrame::ListTag(stdout, aFrame);
   printf(": ");
   nsStyleContext* sc = aFrame->StyleContext();
   while (nullptr != sc) {
     nsStyleContext* psc;
     printf("%p ", sc);
     psc = sc->GetParent();
     sc = psc;
   }
   printf("\n");
 }
 #endif
 #ifdef REFLOW_STATUS_COVERAGE
 static void
 RecordReflowStatus(bool aChildIsBlock, nsReflowStatus aFrameReflowStatus)
 {
   static uint32_t record[2];
   // 0: child-is-block
   // 1: child-is-inline
   int index = 0;
   if (!aChildIsBlock) index |= 1;
   // Compute new status
   uint32_t newS = record[index];
   if (NS_INLINE_IS_BREAK(aFrameReflowStatus)) {
     if (NS_INLINE_IS_BREAK_BEFORE(aFrameReflowStatus)) {
       newS |= 1;
     }
     else if (NS_FRAME_IS_NOT_COMPLETE(aFrameReflowStatus)) {
       newS |= 2;
     }
     else {
       newS |= 4;
     }
   }
   else if (NS_FRAME_IS_NOT_COMPLETE(aFrameReflowStatus)) {
     newS |= 8;
   }
   else {
     newS |= 16;
   }
   // Log updates to the status that yield different values
   if (record[index] != newS) {
     record[index] = newS;
     printf("record(%d): %02x %02x\n", index, record[0], record[1]);
   }
 }
 #endif
 // Destructor function for the overflowLines frame property
 static void
 DestroyOverflowLines(void* aPropertyValue)
 {
   NS_ERROR("Overflow lines should never be destroyed by the FramePropertyTable");
 }
 NS_DECLARE_FRAME_PROPERTY(OverflowLinesProperty, DestroyOverflowLines)
 NS_DECLARE_FRAME_PROPERTY_FRAMELIST(OverflowOutOfFlowsProperty)
 NS_DECLARE_FRAME_PROPERTY_FRAMELIST(PushedFloatProperty)
 NS_DECLARE_FRAME_PROPERTY_FRAMELIST(OutsideBulletProperty)
 NS_DECLARE_FRAME_PROPERTY(InsideBulletProperty, nullptr)
 NS_DECLARE_FRAME_PROPERTY(BottomEdgeOfChildrenProperty, nullptr)
 //----------------------------------------------------------------------
 nsIFrame*
 NS_NewBlockFrame(nsIPresShell* aPresShell, nsStyleContext* aContext, nsFrameState aFlags)
 {
   nsBlockFrame* it = new (aPresShell) nsBlockFrame(aContext);
   it->SetFlags(aFlags);
   return it;
 }
 NS_IMPL_FRAMEARENA_HELPERS(nsBlockFrame)
 nsBlockFrame::~nsBlockFrame()
 {
 }
 void
 nsBlockFrame::DestroyFrom(nsIFrame* aDestructRoot)
 {
   ClearLineCursor();
   DestroyAbsoluteFrames(aDestructRoot);
   mFloats.DestroyFramesFrom(aDestructRoot);
   nsPresContext* presContext = PresContext();
   nsIPresShell* shell = presContext->PresShell();
   nsLineBox::DeleteLineList(presContext, mLines, aDestructRoot,
                             &mFrames);
   FramePropertyTable* props = presContext->PropertyTable();
   if (HasPushedFloats()) {
     SafelyDestroyFrameListProp(aDestructRoot, shell, props,
                                PushedFloatProperty());
     RemoveStateBits(NS_BLOCK_HAS_PUSHED_FLOATS);
   }
   // destroy overflow lines now
   FrameLines* overflowLines = RemoveOverflowLines();
   if (overflowLines) {
     nsLineBox::DeleteLineList(presContext, overflowLines->mLines,
                               aDestructRoot, &overflowLines->mFrames);
     delete overflowLines;
   }
   if (GetStateBits() & NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS) {
     SafelyDestroyFrameListProp(aDestructRoot, shell, props,
                                OverflowOutOfFlowsProperty());
     RemoveStateBits(NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS);
   }
   if (HasOutsideBullet()) {
     SafelyDestroyFrameListProp(aDestructRoot, shell, props,
                                OutsideBulletProperty());
     RemoveStateBits(NS_BLOCK_FRAME_HAS_OUTSIDE_BULLET);
   }
   nsBlockFrameSuper::DestroyFrom(aDestructRoot);
 }
 /* virtual */ nsILineIterator*
 nsBlockFrame::GetLineIterator()
 {
   nsLineIterator* it = new nsLineIterator;
   if (!it)
     return nullptr;
   const nsStyleVisibility* visibility = StyleVisibility();
   nsresult rv = it->Init(mLines, visibility->mDirection == NS_STYLE_DIRECTION_RTL);
   if (NS_FAILED(rv)) {
     delete it;
     return nullptr;
   }
   return it;
 }
 NS_QUERYFRAME_HEAD(nsBlockFrame)
   NS_QUERYFRAME_ENTRY(nsBlockFrame)
 NS_QUERYFRAME_TAIL_INHERITING(nsBlockFrameSuper)
 nsSplittableType
 nsBlockFrame::GetSplittableType() const
 {
   return NS_FRAME_SPLITTABLE_NON_RECTANGULAR;
 }
 #ifdef DEBUG_FRAME_DUMP
 void
 nsBlockFrame::List(FILE* out, const char* aPrefix, uint32_t aFlags) const
 {
   nsCString str;
   ListGeneric(str, aPrefix, aFlags);
   fprintf_stderr(out, "%s<\n", str.get());
   nsCString pfx(aPrefix);
   pfx += "  ";
   // Output the lines
   if (!mLines.empty()) {
     const_line_iterator line = begin_lines(), line_end = end_lines();
     for ( ; line != line_end; ++line) {
       line->List(out, pfx.get(), aFlags);
     }
   }
   // Output the overflow lines.
   const FrameLines* overflowLines = GetOverflowLines();
   if (overflowLines && !overflowLines->mLines.empty()) {
     fprintf_stderr(out, "%sOverflow-lines %p/%p <\n", pfx.get(), overflowLines, &overflowLines->mFrames);
     nsCString nestedPfx(pfx);
     nestedPfx += "  ";
     const_line_iterator line = overflowLines->mLines.begin(),
                         line_end = overflowLines->mLines.end();
     for ( ; line != line_end; ++line) {
       line->List(out, nestedPfx.get(), aFlags);
     }
     fprintf_stderr(out, "%s>\n", pfx.get());
   }
   // skip the principal list - we printed the lines above
   // skip the overflow list - we printed the overflow lines above
   ChildListIterator lists(this);
   ChildListIDs skip(kPrincipalList | kOverflowList);
   for (; !lists.IsDone(); lists.Next()) {
     if (skip.Contains(lists.CurrentID())) {
       continue;
     }
     fprintf_stderr(out, "%s%s %p <\n", pfx.get(),
       mozilla::layout::ChildListName(lists.CurrentID()),
       &GetChildList(lists.CurrentID()));
     nsCString nestedPfx(pfx);
     nestedPfx += "  ";
     nsFrameList::Enumerator childFrames(lists.CurrentList());
     for (; !childFrames.AtEnd(); childFrames.Next()) {
       nsIFrame* kid = childFrames.get();
       kid->List(out, nestedPfx.get(), aFlags);
     }
     fprintf_stderr(out, "%s>\n", pfx.get());
   }
   fprintf_stderr(out, "%s>\n", aPrefix);
 }
 nsresult
 nsBlockFrame::GetFrameName(nsAString& aResult) const
 {
   return MakeFrameName(NS_LITERAL_STRING("Block"), aResult);
 }
 #endif
 #ifdef DEBUG
 nsFrameState
 nsBlockFrame::GetDebugStateBits() const
 {
   // We don't want to include our cursor flag in the bits the
   // regression tester looks at
   return nsBlockFrameSuper::GetDebugStateBits() & ~NS_BLOCK_HAS_LINE_CURSOR;
 }
 #endif
 nsIAtom*
 nsBlockFrame::GetType() const
 {
   return nsGkAtoms::blockFrame;
 }
 void
 nsBlockFrame::InvalidateFrame(uint32_t aDisplayItemKey)
 {
   if (IsSVGText()) {
     NS_ASSERTION(GetParent()->GetType() == nsGkAtoms::svgTextFrame,
                  "unexpected block frame in SVG text");
     GetParent()->InvalidateFrame();
     return;
   }
   nsBlockFrameSuper::InvalidateFrame(aDisplayItemKey);
 }
 void
 nsBlockFrame::InvalidateFrameWithRect(const nsRect& aRect, uint32_t aDisplayItemKey)
 {
   if (IsSVGText()) {
     NS_ASSERTION(GetParent()->GetType() == nsGkAtoms::svgTextFrame,
                  "unexpected block frame in SVG text");
     GetParent()->InvalidateFrame();
     return;
   }
   nsBlockFrameSuper::InvalidateFrameWithRect(aRect, aDisplayItemKey);
 }
 nscoord
 nsBlockFrame::GetBaseline() const
 {
   nscoord result;
   if (nsLayoutUtils::GetLastLineBaseline(this, &result))
     return result;
   return nsFrame::GetBaseline();
 }
 nscoord
 nsBlockFrame::GetCaretBaseline() const
 {
   nsRect contentRect = GetContentRect();
   nsMargin bp = GetUsedBorderAndPadding();
   if (!mLines.empty()) {
     const_line_iterator line = begin_lines();
     const nsLineBox* firstLine = line;
     if (firstLine->GetChildCount()) {
       return bp.top + firstLine->mFirstChild->GetCaretBaseline();
     }
   }
   nsRefPtr<nsFontMetrics> fm;
   float inflation = nsLayoutUtils::FontSizeInflationFor(this);
   nsLayoutUtils::GetFontMetricsForFrame(this, getter_AddRefs(fm), inflation);
   nscoord lineHeight =
     nsHTMLReflowState::CalcLineHeight(GetContent(), StyleContext(),
                                       contentRect.height, inflation);
   return nsLayoutUtils::GetCenteredFontBaseline(fm, lineHeight) + bp.top;
 }
 /////////////////////////////////////////////////////////////////////////////
 // Child frame enumeration
 const nsFrameList&
 nsBlockFrame::GetChildList(ChildListID aListID) const
 {
   switch (aListID) {
     case kPrincipalList:
       return mFrames;
     case kOverflowList: {
       FrameLines* overflowLines = GetOverflowLines();
       return overflowLines ? overflowLines->mFrames : nsFrameList::EmptyList();
     }
     case kFloatList:
       return mFloats;
     case kOverflowOutOfFlowList: {
       const nsFrameList* list = GetOverflowOutOfFlows();
       return list ? *list : nsFrameList::EmptyList();
     }
     case kPushedFloatsList: {
       const nsFrameList* list = GetPushedFloats();
       return list ? *list : nsFrameList::EmptyList();
     }
     case kBulletList: {
       const nsFrameList* list = GetOutsideBulletList();
       return list ? *list : nsFrameList::EmptyList();
     }
     default:
       return nsContainerFrame::GetChildList(aListID);
   }
 }
 void
 nsBlockFrame::GetChildLists(nsTArray<ChildList>* aLists) const
 {
   nsContainerFrame::GetChildLists(aLists);
   FrameLines* overflowLines = GetOverflowLines();
   if (overflowLines) {
     overflowLines->mFrames.AppendIfNonempty(aLists, kOverflowList);
   }
   const nsFrameList* list = GetOverflowOutOfFlows();
   if (list) {
     list->AppendIfNonempty(aLists, kOverflowOutOfFlowList);
   }
   mFloats.AppendIfNonempty(aLists, kFloatList);
   list = GetOutsideBulletList();
   if (list) {
     list->AppendIfNonempty(aLists, kBulletList);
   }
   list = GetPushedFloats();
   if (list) {
     list->AppendIfNonempty(aLists, kPushedFloatsList);
   }
 }
 /* virtual */ bool
 nsBlockFrame::IsFloatContainingBlock() const
 {
   return true;
 }
 static void
 ReparentFrame(nsIFrame* aFrame, nsIFrame* aOldParent, nsIFrame* aNewParent)
 {
   NS_ASSERTION(aOldParent == aFrame->GetParent(),
                "Parent not consistent with expectations");
   aFrame->SetParent(aNewParent);
   // When pushing and pulling frames we need to check for whether any
   // views need to be reparented
   nsContainerFrame::ReparentFrameView(aFrame, aOldParent, aNewParent);
 }
 static void
 ReparentFrames(nsFrameList& aFrameList, nsIFrame* aOldParent,
                nsIFrame* aNewParent)
 {
   for (nsFrameList::Enumerator e(aFrameList); !e.AtEnd(); e.Next()) {
     ReparentFrame(e.get(), aOldParent, aNewParent);
   }
 }
 /**
  * Remove the first line from aFromLines and adjust the associated frame list
  * aFromFrames accordingly.  The removed line is assigned to *aOutLine and
  * a frame list with its frames is assigned to *aOutFrames, i.e. the frames
  * that were extracted from the head of aFromFrames.
  * aFromLines must contain at least one line, the line may be empty.
  * @return true if aFromLines becomes empty
  */
 static bool
 RemoveFirstLine(nsLineList& aFromLines, nsFrameList& aFromFrames,
                 nsLineBox** aOutLine, nsFrameList* aOutFrames)
 {
   nsLineList_iterator removedLine = aFromLines.begin();
   *aOutLine = removedLine;
   nsLineList_iterator next = aFromLines.erase(removedLine);
   bool isLastLine = next == aFromLines.end();
   nsIFrame* lastFrame = isLastLine ? aFromFrames.LastChild()
                                    : next->mFirstChild->GetPrevSibling();
   nsFrameList::FrameLinkEnumerator linkToBreak(aFromFrames, lastFrame);
   *aOutFrames = aFromFrames.ExtractHead(linkToBreak);
   return isLastLine;
 }
 //////////////////////////////////////////////////////////////////////
 // Reflow methods
 /* virtual */ void
 nsBlockFrame::MarkIntrinsicWidthsDirty()
 {
   nsBlockFrame* dirtyBlock = static_cast<nsBlockFrame*>(FirstContinuation());
   dirtyBlock->mMinWidth = NS_INTRINSIC_WIDTH_UNKNOWN;
   dirtyBlock->mPrefWidth = NS_INTRINSIC_WIDTH_UNKNOWN;
   if (!(GetStateBits() & NS_BLOCK_NEEDS_BIDI_RESOLUTION)) {
     for (nsIFrame* frame = dirtyBlock; frame;
          frame = frame->GetNextContinuation()) {
       frame->AddStateBits(NS_BLOCK_NEEDS_BIDI_RESOLUTION);
     }
   }
   nsBlockFrameSuper::MarkIntrinsicWidthsDirty();
 }
 void
 nsBlockFrame::CheckIntrinsicCacheAgainstShrinkWrapState()
 {
   nsPresContext *presContext = PresContext();
   if (!nsLayoutUtils::FontSizeInflationEnabled(presContext)) {
     return;
   }
   bool inflationEnabled =
     !presContext->mInflationDisabledForShrinkWrap;
   if (inflationEnabled !=
       !!(GetStateBits() & NS_BLOCK_FRAME_INTRINSICS_INFLATED)) {
     mMinWidth = NS_INTRINSIC_WIDTH_UNKNOWN;
     mPrefWidth = NS_INTRINSIC_WIDTH_UNKNOWN;
     if (inflationEnabled) {
       AddStateBits(NS_BLOCK_FRAME_INTRINSICS_INFLATED);
     } else {
       RemoveStateBits(NS_BLOCK_FRAME_INTRINSICS_INFLATED);
     }
   }
 }
 /* virtual */ nscoord
 nsBlockFrame::GetMinWidth(nsRenderingContext *aRenderingContext)
 {
   nsIFrame* firstInFlow = FirstContinuation();
   if (firstInFlow != this)
     return firstInFlow->GetMinWidth(aRenderingContext);
   DISPLAY_MIN_WIDTH(this, mMinWidth);
   CheckIntrinsicCacheAgainstShrinkWrapState();
   if (mMinWidth != NS_INTRINSIC_WIDTH_UNKNOWN)
     return mMinWidth;
 #ifdef DEBUG
   if (gNoisyIntrinsic) {
     IndentBy(stdout, gNoiseIndent);
     ListTag(stdout);
     printf(": GetMinWidth\n");
   }
   AutoNoisyIndenter indenter(gNoisyIntrinsic);
 #endif
   for (nsBlockFrame* curFrame = this; curFrame;
        curFrame = static_cast<nsBlockFrame*>(curFrame->GetNextContinuation())) {
     curFrame->LazyMarkLinesDirty();
   }
   if (GetStateBits() & NS_BLOCK_NEEDS_BIDI_RESOLUTION)
     ResolveBidi();
   InlineMinWidthData data;
   for (nsBlockFrame* curFrame = this; curFrame;
        curFrame = static_cast<nsBlockFrame*>(curFrame->GetNextContinuation())) {
     for (line_iterator line = curFrame->begin_lines(), line_end = curFrame->end_lines();
       line != line_end; ++line)
     {
 #ifdef DEBUG
       if (gNoisyIntrinsic) {
         IndentBy(stdout, gNoiseIndent);
         printf("line (%s%s)\n",
                line->IsBlock() ? "block" : "inline",
                line->IsEmpty() ? ", empty" : "");
       }
       AutoNoisyIndenter lineindent(gNoisyIntrinsic);
 #endif
       if (line->IsBlock()) {
         data.ForceBreak(aRenderingContext);
         data.currentLine = nsLayoutUtils::IntrinsicForContainer(aRenderingContext,
                         line->mFirstChild, nsLayoutUtils::MIN_WIDTH);
         data.ForceBreak(aRenderingContext);
       } else {
         if (!curFrame->GetPrevContinuation() &&
             line == curFrame->begin_lines()) {
           // Only add text-indent if it has no percentages; using a
           // percentage basis of 0 unconditionally would give strange
           // behavior for calc(10%-3px).
           const nsStyleCoord &indent = StyleText()->mTextIndent;
           if (indent.ConvertsToLength())
             data.currentLine += nsRuleNode::ComputeCoordPercentCalc(indent, 0);
         }
         // XXX Bug NNNNNN Should probably handle percentage text-indent.
         data.line = &line;
         data.lineContainer = curFrame;
         nsIFrame *kid = line->mFirstChild;
         for (int32_t i = 0, i_end = line->GetChildCount(); i != i_end;
              ++i, kid = kid->GetNextSibling()) {
           kid->AddInlineMinWidth(aRenderingContext, &data);
         }
       }
 #ifdef DEBUG
       if (gNoisyIntrinsic) {
         IndentBy(stdout, gNoiseIndent);
         printf("min: [prevLines=%d currentLine=%d]\n",
                data.prevLines, data.currentLine);
       }
 #endif
     }
   }
   data.ForceBreak(aRenderingContext);
   mMinWidth = data.prevLines;
   return mMinWidth;
 }
 /* virtual */ nscoord
 nsBlockFrame::GetPrefWidth(nsRenderingContext *aRenderingContext)
 {
   nsIFrame* firstInFlow = FirstContinuation();
   if (firstInFlow != this)
     return firstInFlow->GetPrefWidth(aRenderingContext);
   DISPLAY_PREF_WIDTH(this, mPrefWidth);
   CheckIntrinsicCacheAgainstShrinkWrapState();
   if (mPrefWidth != NS_INTRINSIC_WIDTH_UNKNOWN)
     return mPrefWidth;
 #ifdef DEBUG
   if (gNoisyIntrinsic) {
     IndentBy(stdout, gNoiseIndent);
     ListTag(stdout);
     printf(": GetPrefWidth\n");
   }
   AutoNoisyIndenter indenter(gNoisyIntrinsic);
 #endif
   for (nsBlockFrame* curFrame = this; curFrame;
        curFrame = static_cast<nsBlockFrame*>(curFrame->GetNextContinuation())) {
     curFrame->LazyMarkLinesDirty();
   }
   if (GetStateBits() & NS_BLOCK_NEEDS_BIDI_RESOLUTION)
     ResolveBidi();
   InlinePrefWidthData data;
   for (nsBlockFrame* curFrame = this; curFrame;
        curFrame = static_cast<nsBlockFrame*>(curFrame->GetNextContinuation())) {
     for (line_iterator line = curFrame->begin_lines(), line_end = curFrame->end_lines();
          line != line_end; ++line)
     {
 #ifdef DEBUG
       if (gNoisyIntrinsic) {
         IndentBy(stdout, gNoiseIndent);
         printf("line (%s%s)\n",
                line->IsBlock() ? "block" : "inline",
                line->IsEmpty() ? ", empty" : "");
       }
       AutoNoisyIndenter lineindent(gNoisyIntrinsic);
 #endif
       if (line->IsBlock()) {
         data.ForceBreak(aRenderingContext);
         data.currentLine = nsLayoutUtils::IntrinsicForContainer(aRenderingContext,
                         line->mFirstChild, nsLayoutUtils::PREF_WIDTH);
         data.ForceBreak(aRenderingContext);
       } else {
         if (!curFrame->GetPrevContinuation() &&
             line == curFrame->begin_lines()) {
           // Only add text-indent if it has no percentages; using a
           // percentage basis of 0 unconditionally would give strange
           // behavior for calc(10%-3px).
           const nsStyleCoord &indent = StyleText()->mTextIndent;
           if (indent.ConvertsToLength())
             data.currentLine += nsRuleNode::ComputeCoordPercentCalc(indent, 0);
         }
         // XXX Bug NNNNNN Should probably handle percentage text-indent.
         data.line = &line;
         data.lineContainer = curFrame;
         nsIFrame *kid = line->mFirstChild;
         for (int32_t i = 0, i_end = line->GetChildCount(); i != i_end;
              ++i, kid = kid->GetNextSibling()) {
           kid->AddInlinePrefWidth(aRenderingContext, &data);
         }
       }
 #ifdef DEBUG
       if (gNoisyIntrinsic) {
         IndentBy(stdout, gNoiseIndent);
         printf("pref: [prevLines=%d currentLine=%d]\n",
                data.prevLines, data.currentLine);
       }
 #endif
     }
   }
   data.ForceBreak(aRenderingContext);
   mPrefWidth = data.prevLines;
   return mPrefWidth;
 }
 nsRect
 nsBlockFrame::ComputeTightBounds(gfxContext* aContext) const
 {
   // be conservative
   if (StyleContext()->HasTextDecorationLines()) {
     return GetVisualOverflowRect();
   }
   return ComputeSimpleTightBounds(aContext);
 }
 /* virtual */ nsresult
 nsBlockFrame::GetPrefWidthTightBounds(nsRenderingContext* aRenderingContext,
                                       nscoord* aX,
                                       nscoord* aXMost)
 {
   nsIFrame* firstInFlow = FirstContinuation();
   if (firstInFlow != this) {
     return firstInFlow->GetPrefWidthTightBounds(aRenderingContext, aX, aXMost);
   }
   *aX = 0;
   *aXMost = 0;
   nsresult rv;
   InlinePrefWidthData data;
   for (nsBlockFrame* curFrame = this; curFrame;
        curFrame = static_cast<nsBlockFrame*>(curFrame->GetNextContinuation())) {
     for (line_iterator line = curFrame->begin_lines(), line_end = curFrame->end_lines();
          line != line_end; ++line)
     {
       nscoord childX, childXMost;
       if (line->IsBlock()) {
         data.ForceBreak(aRenderingContext);
         rv = line->mFirstChild->GetPrefWidthTightBounds(aRenderingContext,
                                                         &childX, &childXMost);
         NS_ENSURE_SUCCESS(rv, rv);
         *aX = std::min(*aX, childX);
         *aXMost = std::max(*aXMost, childXMost);
       } else {
         if (!curFrame->GetPrevContinuation() &&
             line == curFrame->begin_lines()) {
           // Only add text-indent if it has no percentages; using a
           // percentage basis of 0 unconditionally would give strange
           // behavior for calc(10%-3px).
           const nsStyleCoord &indent = StyleText()->mTextIndent;
           if (indent.ConvertsToLength()) {
             data.currentLine += nsRuleNode::ComputeCoordPercentCalc(indent, 0);
           }
         }
         // XXX Bug NNNNNN Should probably handle percentage text-indent.
         data.line = &line;
         data.lineContainer = curFrame;
         nsIFrame *kid = line->mFirstChild;
         for (int32_t i = 0, i_end = line->GetChildCount(); i != i_end;
              ++i, kid = kid->GetNextSibling()) {
           rv = kid->GetPrefWidthTightBounds(aRenderingContext, &childX,
                                             &childXMost);
           NS_ENSURE_SUCCESS(rv, rv);
           *aX = std::min(*aX, data.currentLine + childX);
           *aXMost = std::max(*aXMost, data.currentLine + childXMost);
           kid->AddInlinePrefWidth(aRenderingContext, &data);
         }
       }
     }
   }
   data.ForceBreak(aRenderingContext);
   return NS_OK;
 }
 static bool
 AvailableSpaceShrunk(const nsRect& aOldAvailableSpace,
                      const nsRect& aNewAvailableSpace)
 {
   if (aNewAvailableSpace.width == 0) {
     // Positions are not significant if the width is zero.
     return aOldAvailableSpace.width != 0;
   }
   NS_ASSERTION(aOldAvailableSpace.x <= aNewAvailableSpace.x &&
                aOldAvailableSpace.XMost() >= aNewAvailableSpace.XMost(),
                "available space should never grow");
   return aOldAvailableSpace.width != aNewAvailableSpace.width;
 }
 static nsSize
 CalculateContainingBlockSizeForAbsolutes(const nsHTMLReflowState& aReflowState,
                                          nsSize aFrameSize)
 {
   // The issue here is that for a 'height' of 'auto' the reflow state
   // code won't know how to calculate the containing block height
   // because it's calculated bottom up. So we use our own computed
   // size as the dimensions.
   nsIFrame* frame = aReflowState.frame;
   nsSize cbSize(aFrameSize);
     // Containing block is relative to the padding edge
   const nsMargin& border =
     aReflowState.ComputedPhysicalBorderPadding() - aReflowState.ComputedPhysicalPadding();
   cbSize.width -= border.LeftRight();
   cbSize.height -= border.TopBottom();
   if (frame->GetParent()->GetContent() == frame->GetContent() &&
       frame->GetParent()->GetType() != nsGkAtoms::canvasFrame) {
     // We are a wrapped frame for the content (and the wrapper is not the
     // canvas frame, whose size is not meaningful here).
     // Use the container's dimensions, if they have been precomputed.
     // XXX This is a hack! We really should be waiting until the outermost
     // frame is fully reflowed and using the resulting dimensions, even
     // if they're intrinsic.
     // In fact we should be attaching absolute children to the outermost
     // frame and not always sticking them in block frames.
     // First, find the reflow state for the outermost frame for this
     // content, except for fieldsets where the inner anonymous frame has
     // the correct padding area with the legend taken into account.
     const nsHTMLReflowState* aLastRS = &aReflowState;
     const nsHTMLReflowState* lastButOneRS = &aReflowState;
     while (aLastRS->parentReflowState &&
            aLastRS->parentReflowState->frame->GetContent() == frame->GetContent() &&
            aLastRS->parentReflowState->frame->GetType() != nsGkAtoms::fieldSetFrame) {
       lastButOneRS = aLastRS;
       aLastRS = aLastRS->parentReflowState;
     }
     if (aLastRS != &aReflowState) {
       // Scrollbars need to be specifically excluded, if present, because they are outside the
       // padding-edge. We need better APIs for getting the various boxes from a frame.
       nsIScrollableFrame* scrollFrame = do_QueryFrame(aLastRS->frame);
       nsMargin scrollbars(0,0,0,0);
       if (scrollFrame) {
         scrollbars =
           scrollFrame->GetDesiredScrollbarSizes(aLastRS->frame->PresContext(),
                                                 aLastRS->rendContext);
         if (!lastButOneRS->mFlags.mAssumingHScrollbar) {
           scrollbars.top = scrollbars.bottom = 0;
         }
         if (!lastButOneRS->mFlags.mAssumingVScrollbar) {
           scrollbars.left = scrollbars.right = 0;
         }
       }
       // We found a reflow state for the outermost wrapping frame, so use
       // its computed metrics if available
       if (aLastRS->ComputedWidth() != NS_UNCONSTRAINEDSIZE) {
         cbSize.width = std::max(0,
           aLastRS->ComputedWidth() + aLastRS->ComputedPhysicalPadding().LeftRight() - scrollbars.LeftRight());
       }
       if (aLastRS->ComputedHeight() != NS_UNCONSTRAINEDSIZE) {
         cbSize.height = std::max(0,
           aLastRS->ComputedHeight() + aLastRS->ComputedPhysicalPadding().TopBottom() - scrollbars.TopBottom());
       }
     }
   }
   return cbSize;
 }
 nsresult
 nsBlockFrame::Reflow(nsPresContext*           aPresContext,
                      nsHTMLReflowMetrics&     aMetrics,
                      const nsHTMLReflowState& aReflowState,
                      nsReflowStatus&          aStatus)
 {
   DO_GLOBAL_REFLOW_COUNT("nsBlockFrame");
   DISPLAY_REFLOW(aPresContext, this, aReflowState, aMetrics, aStatus);
 #ifdef DEBUG
   if (gNoisyReflow) {
     IndentBy(stdout, gNoiseIndent);
     ListTag(stdout);
     printf(": begin reflow availSize=%d,%d computedSize=%d,%d\n",
            aReflowState.AvailableWidth(), aReflowState.AvailableHeight(),
            aReflowState.ComputedWidth(), aReflowState.ComputedHeight());
   }
   AutoNoisyIndenter indent(gNoisy);
   PRTime start = 0; // Initialize these variablies to silence the compiler.
   int32_t ctc = 0;        // We only use these if they are set (gLameReflowMetrics).
   if (gLameReflowMetrics) {
     start = PR_Now();
     ctc = nsLineBox::GetCtorCount();
   }
 #endif
   const nsHTMLReflowState *reflowState = &aReflowState;
   nscoord consumedHeight = GetConsumedHeight();
   nscoord effectiveComputedHeight = GetEffectiveComputedHeight(aReflowState,
                                                                consumedHeight);
   Maybe<nsHTMLReflowState> mutableReflowState;
   // If we have non-auto height, we're clipping our kids and we fit,
   // make sure our kids fit too.
   if (aReflowState.AvailableHeight() != NS_UNCONSTRAINEDSIZE &&
       aReflowState.ComputedHeight() != NS_AUTOHEIGHT &&
       ShouldApplyOverflowClipping(this, aReflowState.mStyleDisplay)) {
     LogicalMargin blockDirExtras = aReflowState.ComputedLogicalBorderPadding();
     WritingMode wm = aReflowState.GetWritingMode();
     if (GetLogicalSkipSides() & (LOGICAL_SIDE_B_START)) {
       blockDirExtras.BStart(wm) = 0;
     } else {
       // Bottom margin never causes us to create continuations, so we
       // don't need to worry about whether it fits in its entirety.
       blockDirExtras.BStart(wm) +=
         aReflowState.ComputedLogicalMargin().BStart(wm);
     }
     if (effectiveComputedHeight + blockDirExtras.BStartEnd(wm) <=
         aReflowState.AvailableBSize()) {
       mutableReflowState.construct(aReflowState);
       mutableReflowState.ref().AvailableBSize() = NS_UNCONSTRAINEDSIZE;
       reflowState = mutableReflowState.addr();
     }
   }
   // See comment below about oldSize. Use *only* for the
   // abs-pos-containing-block-size-change optimization!
   nsSize oldSize = GetSize();
   // Should we create a float manager?
   nsAutoFloatManager autoFloatManager(const_cast<nsHTMLReflowState&>(*reflowState));
   // XXXldb If we start storing the float manager in the frame rather
   // than keeping it around only during reflow then we should create it
   // only when there are actually floats to manage.  Otherwise things
   // like tables will gain significant bloat.
   bool needFloatManager = nsBlockFrame::BlockNeedsFloatManager(this);
   if (needFloatManager)
     autoFloatManager.CreateFloatManager(aPresContext);
   // OK, some lines may be reflowed. Blow away any saved line cursor
   // because we may invalidate the nondecreasing
   // overflowArea.VisualOverflow().y/yMost invariant, and we may even
   // delete the line with the line cursor.
   ClearLineCursor();
   if (IsFrameTreeTooDeep(*reflowState, aMetrics, aStatus)) {
     return NS_OK;
   }
   bool topMarginRoot, bottomMarginRoot;
   IsMarginRoot(&topMarginRoot, &bottomMarginRoot);
   // Cache the consumed height in the block reflow state so that we don't have
   // to continually recompute it.
   nsBlockReflowState state(*reflowState, aPresContext, this,
                            topMarginRoot, bottomMarginRoot, needFloatManager,
                            consumedHeight);
   if (GetStateBits() & NS_BLOCK_NEEDS_BIDI_RESOLUTION)
     static_cast<nsBlockFrame*>(FirstContinuation())->ResolveBidi();
   if (RenumberLists(aPresContext)) {
     AddStateBits(NS_FRAME_HAS_DIRTY_CHILDREN);
   }
   nsresult rv = NS_OK;
   // ALWAYS drain overflow. We never want to leave the previnflow's
   // overflow lines hanging around; block reflow depends on the
   // overflow line lists being cleared out between reflow passes.
   DrainOverflowLines();
   // Handle paginated overflow (see nsContainerFrame.h)
   nsOverflowAreas ocBounds;
   nsReflowStatus ocStatus = NS_FRAME_COMPLETE;
   if (GetPrevInFlow()) {
     ReflowOverflowContainerChildren(aPresContext, *reflowState, ocBounds, 0,
                                     ocStatus);
   }
   // Now that we're done cleaning up our overflow container lists, we can
   // give |state| its nsOverflowContinuationTracker.
   nsOverflowContinuationTracker tracker(this, false);
   state.mOverflowTracker = &tracker;
   // Drain & handle pushed floats
   DrainPushedFloats(state);
   nsOverflowAreas fcBounds;
   nsReflowStatus fcStatus = NS_FRAME_COMPLETE;
   ReflowPushedFloats(state, fcBounds, fcStatus);
   // If we're not dirty (which means we'll mark everything dirty later)
   // and our width has changed, mark the lines dirty that we need to
   // mark dirty for a resize reflow.
   if (!(GetStateBits() & NS_FRAME_IS_DIRTY) && reflowState->mFlags.mHResize) {
     PrepareResizeReflow(state);
   }
   LazyMarkLinesDirty();
   mState &= ~NS_FRAME_FIRST_REFLOW;
   // Now reflow...
   rv = ReflowDirtyLines(state);
   // If we have a next-in-flow, and that next-in-flow has pushed floats from
   // this frame from a previous iteration of reflow, then we should not return
   // a status of NS_FRAME_COMPLETE, since we actually have overflow, it's just
   // already been handled.
   // NOTE: This really shouldn't happen, since we _should_ pull back our floats
   // and reflow them, but just in case it does, this is a safety precaution so
   // we don't end up with a placeholder pointing to frames that have already
   // been deleted as part of removing our next-in-flow.
   if (NS_FRAME_IS_COMPLETE(state.mReflowStatus)) {
     nsBlockFrame* nif = static_cast<nsBlockFrame*>(GetNextInFlow());
     while (nif) {
       if (nif->HasPushedFloatsFromPrevContinuation()) {
         NS_MergeReflowStatusInto(&state.mReflowStatus, NS_FRAME_NOT_COMPLETE);
       }
       nif = static_cast<nsBlockFrame*>(nif->GetNextInFlow());
     }
   }
   NS_ASSERTION(NS_SUCCEEDED(rv), "reflow dirty lines failed");
   if (NS_FAILED(rv)) return rv;
   NS_MergeReflowStatusInto(&state.mReflowStatus, ocStatus);
   NS_MergeReflowStatusInto(&state.mReflowStatus, fcStatus);
   // If we end in a BR with clear and affected floats continue,
   // we need to continue, too.
   if (NS_UNCONSTRAINEDSIZE != reflowState->AvailableHeight() &&
       NS_FRAME_IS_COMPLETE(state.mReflowStatus) &&
       state.mFloatManager->ClearContinues(FindTrailingClear())) {
     NS_FRAME_SET_INCOMPLETE(state.mReflowStatus);
   }
   if (!NS_FRAME_IS_FULLY_COMPLETE(state.mReflowStatus)) {
     if (HasOverflowLines() || HasPushedFloats()) {
       state.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
     }
 #ifdef DEBUG_kipp
     ListTag(stdout); printf(": block is not fully complete\n");
 #endif
   }
   // Place the "marker" (bullet) frame if it is placed next to a block
   // child.
   //
   // According to the CSS2 spec, section 12.6.1, the "marker" box
   // participates in the height calculation of the list-item box's
   // first line box.
   //
   // There are exactly two places a bullet can be placed: near the
   // first or second line. It's only placed on the second line in a
   // rare case: an empty first line followed by a second line that
   // contains a block (example: <LI>\n<P>... ). This is where
   // the second case can happen.
   if (HasOutsideBullet() && !mLines.empty() &&
       (mLines.front()->IsBlock() ||
        (0 == mLines.front()->BSize() &&
         mLines.front() != mLines.back() &&
         mLines.begin().next()->IsBlock()))) {
     // Reflow the bullet
     nsHTMLReflowMetrics metrics(aReflowState);
     // XXX Use the entire line when we fix bug 25888.
     nsLayoutUtils::LinePosition position;
     bool havePosition = nsLayoutUtils::GetFirstLinePosition(this, &position);
     nscoord lineTop = havePosition ? position.mTop
                                    : reflowState->ComputedPhysicalBorderPadding().top;
     nsIFrame* bullet = GetOutsideBullet();
     ReflowBullet(bullet, state, metrics, lineTop);
     NS_ASSERTION(!BulletIsEmpty() || metrics.Height() == 0,
                  "empty bullet took up space");
     if (havePosition && !BulletIsEmpty()) {
       // We have some lines to align the bullet with.
       // Doing the alignment using the baseline will also cater for
       // bullets that are placed next to a child block (bug 92896)
       // Tall bullets won't look particularly nice here...
       nsRect bbox = bullet->GetRect();
       bbox.y = position.mBaseline - metrics.TopAscent();
       bullet->SetRect(bbox);
     }
     // Otherwise just leave the bullet where it is, up against our top padding.
   }
   CheckFloats(state);
   // Compute our final size
   nscoord bottomEdgeOfChildren;
   ComputeFinalSize(*reflowState, state, aMetrics, &bottomEdgeOfChildren);
   nsRect areaBounds = nsRect(0, 0, aMetrics.Width(), aMetrics.Height());
   ComputeOverflowAreas(areaBounds, reflowState->mStyleDisplay,
                        bottomEdgeOfChildren, aMetrics.mOverflowAreas);
   // Factor overflow container child bounds into the overflow area
   aMetrics.mOverflowAreas.UnionWith(ocBounds);
   // Factor pushed float child bounds into the overflow area
   aMetrics.mOverflowAreas.UnionWith(fcBounds);
   // Let the absolutely positioned container reflow any absolutely positioned
   // child frames that need to be reflowed, e.g., elements with a percentage
   // based width/height
   // We want to do this under either of two conditions:
   //  1. If we didn't do the incremental reflow above.
   //  2. If our size changed.
   // Even though it's the padding edge that's the containing block, we
   // can use our rect (the border edge) since if the border style
   // changed, the reflow would have been targeted at us so we'd satisfy
   // condition 1.
   // XXX checking oldSize is bogus, there are various reasons we might have
   // reflowed but our size might not have been changed to what we
   // asked for (e.g., we ended up being pushed to a new page)
   // When WillReflowAgainForClearance is true, we will reflow again without
   // resetting the size. Because of this, we must not reflow our abs-pos children
   // in that situation --- what we think is our "new size"
   // will not be our real new size. This also happens to be more efficient.
   if (HasAbsolutelyPositionedChildren()) {
     nsAbsoluteContainingBlock* absoluteContainer = GetAbsoluteContainingBlock();
     bool haveInterrupt = aPresContext->HasPendingInterrupt();
     if (reflowState->WillReflowAgainForClearance() ||
         haveInterrupt) {
       // Make sure that when we reflow again we'll actually reflow all the abs
       // pos frames that might conceivably depend on our size (or all of them,
       // if we're dirty right now and interrupted; in that case we also need
       // to mark them all with NS_FRAME_IS_DIRTY).  Sadly, we can't do much
       // better than that, because we don't really know what our size will be,
       // and it might in fact not change on the followup reflow!
       if (haveInterrupt && (GetStateBits() & NS_FRAME_IS_DIRTY)) {
         absoluteContainer->MarkAllFramesDirty();
       } else {
         absoluteContainer->MarkSizeDependentFramesDirty();
       }
     } else {
       nsSize containingBlockSize =
         CalculateContainingBlockSizeForAbsolutes(*reflowState,
                                                  nsSize(aMetrics.Width(),
                                                         aMetrics.Height()));
       // Mark frames that depend on changes we just made to this frame as dirty:
       // Now we can assume that the padding edge hasn't moved.
       // We need to reflow the absolutes if one of them depends on
       // its placeholder position, or the containing block size in a
       // direction in which the containing block size might have
       // changed.
       bool cbWidthChanged = aMetrics.Width() != oldSize.width;
       bool isRoot = !GetContent()->GetParent();
       // If isRoot and we have auto height, then we are the initial
       // containing block and the containing block height is the
       // viewport height, which can't change during incremental
       // reflow.
       bool cbHeightChanged =
         !(isRoot && NS_UNCONSTRAINEDSIZE == reflowState->ComputedHeight()) &&
         aMetrics.Height() != oldSize.height;
       nsRect containingBlock(nsPoint(0, 0), containingBlockSize);
       absoluteContainer->Reflow(this, aPresContext, *reflowState,
                                 state.mReflowStatus,
                                 containingBlock, true,
                                 cbWidthChanged, cbHeightChanged,
                                 &aMetrics.mOverflowAreas);
       //XXXfr Why isn't this rv (and others in this file) checked/returned?
     }
   }
   FinishAndStoreOverflow(&aMetrics);
   // Clear the float manager pointer in the block reflow state so we
   // don't waste time translating the coordinate system back on a dead
   // float manager.
   if (needFloatManager)
     state.mFloatManager = nullptr;
   aStatus = state.mReflowStatus;
 #ifdef DEBUG
   // Between when we drain pushed floats and when we complete reflow,
   // we're allowed to have multiple continuations of the same float on
   // our floats list, since a first-in-flow might get pushed to a later
   // continuation of its containing block.  But it's not permitted
   // outside that time.
   nsLayoutUtils::AssertNoDuplicateContinuations(this, mFloats);
   if (gNoisyReflow) {
     IndentBy(stdout, gNoiseIndent);
     ListTag(stdout);
     printf(": status=%x (%scomplete) metrics=%d,%d carriedMargin=%d",
            aStatus, NS_FRAME_IS_COMPLETE(aStatus) ? "" : "not ",
            aMetrics.Width(), aMetrics.Height(),
            aMetrics.mCarriedOutBottomMargin.get());
     if (HasOverflowAreas()) {
       printf(" overflow-vis={%d,%d,%d,%d}",
              aMetrics.VisualOverflow().x,
              aMetrics.VisualOverflow().y,
              aMetrics.VisualOverflow().width,
              aMetrics.VisualOverflow().height);
       printf(" overflow-scr={%d,%d,%d,%d}",
              aMetrics.ScrollableOverflow().x,
              aMetrics.ScrollableOverflow().y,
              aMetrics.ScrollableOverflow().width,
              aMetrics.ScrollableOverflow().height);
     }
     printf("\n");
   }
   if (gLameReflowMetrics) {
     PRTime end = PR_Now();
     int32_t ectc = nsLineBox::GetCtorCount();
     int32_t numLines = mLines.size();
     if (!numLines) numLines = 1;
     PRTime delta, perLineDelta, lines;
     lines = int64_t(numLines);
     delta = end - start;
     perLineDelta = delta / lines;
     ListTag(stdout);
     char buf[400];
     PR_snprintf(buf, sizeof(buf),
                 ": %lld elapsed (%lld per line) (%d lines; %d new lines)",
                 delta, perLineDelta, numLines, ectc - ctc);
     printf("%s\n", buf);
   }
 #endif
   NS_FRAME_SET_TRUNCATION(aStatus, (*reflowState), aMetrics);
   return rv;
 }
 bool
 nsBlockFrame::CheckForCollapsedBottomMarginFromClearanceLine()
 {
   line_iterator begin = begin_lines();
   line_iterator line = end_lines();
   while (true) {
     if (begin == line) {
       return false;
     }
     --line;
     if (line->BSize() != 0 || !line->CachedIsEmpty()) {
       return false;
     }
     if (line->HasClearance()) {
       return true;
     }
   }
   // not reached
 }
 void
 nsBlockFrame::ComputeFinalSize(const nsHTMLReflowState& aReflowState,
                                nsBlockReflowState&      aState,
                                nsHTMLReflowMetrics&     aMetrics,
                                nscoord*                 aBottomEdgeOfChildren)
 {
   const nsMargin& borderPadding = aState.BorderPadding();
 #ifdef NOISY_FINAL_SIZE
   ListTag(stdout);
   printf(": mY=%d mIsBottomMarginRoot=%s mPrevBottomMargin=%d bp=%d,%d\n",
          aState.mY, aState.GetFlag(BRS_ISBOTTOMMARGINROOT) ? "yes" : "no",
          aState.mPrevBottomMargin,
          borderPadding.top, borderPadding.bottom);
 #endif
   // Compute final width
   aMetrics.Width() =
     NSCoordSaturatingAdd(NSCoordSaturatingAdd(borderPadding.left,
                                               aReflowState.ComputedWidth()),
                          borderPadding.right);
   // Return bottom margin information
   // rbs says he hit this assertion occasionally (see bug 86947), so
   // just set the margin to zero and we'll figure out why later
   //NS_ASSERTION(aMetrics.mCarriedOutBottomMargin.IsZero(),
   //             "someone else set the margin");
   nscoord nonCarriedOutVerticalMargin = 0;
   if (!aState.GetFlag(BRS_ISBOTTOMMARGINROOT)) {
     // Apply rule from CSS 2.1 section 8.3.1. If we have some empty
     // line with clearance and a non-zero top margin and all
     // subsequent lines are empty, then we do not allow our children's
     // carried out bottom margin to be carried out of us and collapse
     // with our own bottom margin.
     if (CheckForCollapsedBottomMarginFromClearanceLine()) {
       // Convert the children's carried out margin to something that
       // we will include in our height
       nonCarriedOutVerticalMargin = aState.mPrevBottomMargin.get();
       aState.mPrevBottomMargin.Zero();
     }
     aMetrics.mCarriedOutBottomMargin = aState.mPrevBottomMargin;
   } else {
     aMetrics.mCarriedOutBottomMargin.Zero();
   }
   nscoord bottomEdgeOfChildren = aState.mY + nonCarriedOutVerticalMargin;
   // Shrink wrap our height around our contents.
   if (aState.GetFlag(BRS_ISBOTTOMMARGINROOT) ||
       NS_UNCONSTRAINEDSIZE != aReflowState.ComputedHeight()) {
     // When we are a bottom-margin root make sure that our last
     // childs bottom margin is fully applied. We also do this when
     // we have a computed height, since in that case the carried out
     // margin is not going to be applied anywhere, so we should note it
     // here to be included in the overflow area.
     // Apply the margin only if there's space for it.
     if (bottomEdgeOfChildren < aState.mReflowState.AvailableHeight())
     {
       // Truncate bottom margin if it doesn't fit to our available height.
       bottomEdgeOfChildren =
         std::min(bottomEdgeOfChildren + aState.mPrevBottomMargin.get(),
                aState.mReflowState.AvailableHeight());
     }
   }
   if (aState.GetFlag(BRS_FLOAT_MGR)) {
     // Include the float manager's state to properly account for the
     // bottom margin of any floated elements; e.g., inside a table cell.
     nscoord floatHeight =
       aState.ClearFloats(bottomEdgeOfChildren, NS_STYLE_CLEAR_BOTH,
                          nullptr, nsFloatManager::DONT_CLEAR_PUSHED_FLOATS);
     bottomEdgeOfChildren = std::max(bottomEdgeOfChildren, floatHeight);
   }
   if (NS_UNCONSTRAINEDSIZE != aReflowState.ComputedHeight()
       && (mParent->GetType() != nsGkAtoms::columnSetFrame ||
           aReflowState.parentReflowState->AvailableHeight() == NS_UNCONSTRAINEDSIZE)) {
     ComputeFinalHeight(aReflowState, &aState.mReflowStatus,
                        aState.mY + nonCarriedOutVerticalMargin,
                        borderPadding, aMetrics, aState.mConsumedHeight);
     if (!NS_FRAME_IS_COMPLETE(aState.mReflowStatus)) {
       // Use the current height; continuations will take up the rest.
       // Do extend the height to at least consume the available
       // height, otherwise our left/right borders (for example) won't
       // extend all the way to the break.
       aMetrics.Height() = std::max(aReflowState.AvailableHeight(),
                                aState.mY + nonCarriedOutVerticalMargin);
       // ... but don't take up more height than is available
       nscoord effectiveComputedHeight =
         GetEffectiveComputedHeight(aReflowState, aState.GetConsumedHeight());
       aMetrics.Height() = std::min(aMetrics.Height(),
                                borderPadding.top + effectiveComputedHeight);
       // XXX It's pretty wrong that our bottom border still gets drawn on
       // on its own on the last-in-flow, even if we ran out of height
       // here. We need GetSkipSides to check whether we ran out of content
       // height in the current frame, not whether it's last-in-flow.
     }
     // Don't carry out a bottom margin when our height is fixed.
     aMetrics.mCarriedOutBottomMargin.Zero();
   }
   else if (NS_FRAME_IS_COMPLETE(aState.mReflowStatus)) {
     nscoord contentHeight = bottomEdgeOfChildren - borderPadding.top;
     nscoord autoHeight = aReflowState.ApplyMinMaxHeight(contentHeight);
     if (autoHeight != contentHeight) {
       // Our min-height or max-height made our height change.  Don't carry out
       // our kids' bottom margins.
       aMetrics.mCarriedOutBottomMargin.Zero();
     }
     autoHeight += borderPadding.top + borderPadding.bottom;
     aMetrics.Height() = autoHeight;
   }
   else {
     NS_ASSERTION(aReflowState.AvailableHeight() != NS_UNCONSTRAINEDSIZE,
       "Shouldn't be incomplete if availableHeight is UNCONSTRAINED.");
     aMetrics.Height() = std::max(aState.mY, aReflowState.AvailableHeight());
     if (aReflowState.AvailableHeight() == NS_UNCONSTRAINEDSIZE)
       // This should never happen, but it does. See bug 414255
       aMetrics.Height() = aState.mY;
   }
   if (IS_TRUE_OVERFLOW_CONTAINER(this) &&
       NS_FRAME_IS_NOT_COMPLETE(aState.mReflowStatus)) {
     // Overflow containers can only be overflow complete.
     // Note that auto height overflow containers have no normal children
     NS_ASSERTION(aMetrics.Height() == 0, "overflow containers must be zero-height");
     NS_FRAME_SET_OVERFLOW_INCOMPLETE(aState.mReflowStatus);
   }
   // Screen out negative heights --- can happen due to integer overflows :-(
   aMetrics.Height() = std::max(0, aMetrics.Height());
   *aBottomEdgeOfChildren = bottomEdgeOfChildren;
   FrameProperties properties = Properties();
   if (bottomEdgeOfChildren != aMetrics.Height() - borderPadding.bottom) {
     properties.Set(BottomEdgeOfChildrenProperty(),
                    NS_INT32_TO_PTR(bottomEdgeOfChildren));
   } else {
     properties.Delete(BottomEdgeOfChildrenProperty());
   }
 #ifdef DEBUG_blocks
   if (CRAZY_SIZE(aMetrics.Width()) || CRAZY_SIZE(aMetrics.Height())) {
     ListTag(stdout);
     printf(": WARNING: desired:%d,%d\n", aMetrics.Width(), aMetrics.Height());
   }
 #endif
 }
 static void
 ConsiderBottomEdgeOfChildren(nscoord aBottomEdgeOfChildren,
                              nsOverflowAreas& aOverflowAreas)
 {
   // Factor in the bottom edge of the children.  Child frames will be added
   // to the overflow area as we iterate through the lines, but their margins
   // won't, so we need to account for bottom margins here.
   // REVIEW: For now, we do this for both visual and scrollable area,
   // although when we make scrollable overflow area not be a subset of
   // visual, we can change this.
   NS_FOR_FRAME_OVERFLOW_TYPES(otype) {
     nsRect& o = aOverflowAreas.Overflow(otype);
     o.height = std::max(o.YMost(), aBottomEdgeOfChildren) - o.y;
   }
 }
 void
 nsBlockFrame::ComputeOverflowAreas(const nsRect&         aBounds,
                                    const nsStyleDisplay* aDisplay,
                                    nscoord               aBottomEdgeOfChildren,
                                    nsOverflowAreas&      aOverflowAreas)
 {
   // Compute the overflow areas of our children
   // XXX_perf: This can be done incrementally.  It is currently one of
   // the things that makes incremental reflow O(N^2).
   nsOverflowAreas areas(aBounds, aBounds);
   if (!ShouldApplyOverflowClipping(this, aDisplay)) {
     for (line_iterator line = begin_lines(), line_end = end_lines();
          line != line_end;
          ++line) {
       areas.UnionWith(line->GetOverflowAreas());
     }
     // Factor an outside bullet in; normally the bullet will be factored into
     // the line-box's overflow areas. However, if the line is a block
     // line then it won't; if there are no lines, it won't. So just
     // factor it in anyway (it can't hurt if it was already done).
     // XXXldb Can we just fix GetOverflowArea instead?
     nsIFrame* outsideBullet = GetOutsideBullet();
     if (outsideBullet) {
       areas.UnionAllWith(outsideBullet->GetRect());
     }
     ConsiderBottomEdgeOfChildren(aBottomEdgeOfChildren, areas);
   }
 #ifdef NOISY_COMBINED_AREA
   ListTag(stdout);
   printf(": ca=%d,%d,%d,%d\n", area.x, area.y, area.width, area.height);
 #endif
   aOverflowAreas = areas;
 }
 bool
 nsBlockFrame::UpdateOverflow()
 {
   nsRect rect(nsPoint(0, 0), GetSize());
   nsOverflowAreas overflowAreas(rect, rect);
   // We need to update the overflow areas of lines manually, as they
   // get cached and re-used otherwise. Lines aren't exposed as normal
   // frame children, so calling UnionChildOverflow alone will end up
   // using the old cached values.
   for (line_iterator line = begin_lines(), line_end = end_lines();
        line != line_end;
        ++line) {
     nsRect bounds = line->GetPhysicalBounds();
     nsOverflowAreas lineAreas(bounds, bounds);
     int32_t n = line->GetChildCount();
     for (nsIFrame* lineFrame = line->mFirstChild;
          n > 0; lineFrame = lineFrame->GetNextSibling(), --n) {
       ConsiderChildOverflow(lineAreas, lineFrame);
     }
     // Consider the overflow areas of the floats attached to the line as well
     if (line->HasFloats()) {
       for (nsFloatCache* fc = line->GetFirstFloat(); fc; fc = fc->Next()) {
         ConsiderChildOverflow(lineAreas, fc->mFloat);
       }
     }
     line->SetOverflowAreas(lineAreas);
     overflowAreas.UnionWith(lineAreas);
   }
   // Line cursor invariants depend on the overflow areas of the lines, so
   // we must clear the line cursor since those areas may have changed.
   ClearLineCursor();
   // Union with child frames, skipping the principal and float lists
   // since we already handled those using the line boxes.
   nsLayoutUtils::UnionChildOverflow(this, overflowAreas,
                                     kPrincipalList | kFloatList);
   bool found;
   nscoord bottomEdgeOfChildren = NS_PTR_TO_INT32(
     Properties().Get(BottomEdgeOfChildrenProperty(), &found));
   if (found) {
     ConsiderBottomEdgeOfChildren(bottomEdgeOfChildren, overflowAreas);
   }
   return FinishAndStoreOverflow(overflowAreas, GetSize());
 }
 void
 nsBlockFrame::LazyMarkLinesDirty()
 {
   if (GetStateBits() & NS_BLOCK_LOOK_FOR_DIRTY_FRAMES) {
     for (line_iterator line = begin_lines(), line_end = end_lines();
          line != line_end; ++line) {
       int32_t n = line->GetChildCount();
       for (nsIFrame* lineFrame = line->mFirstChild;
            n > 0; lineFrame = lineFrame->GetNextSibling(), --n) {
         if (NS_SUBTREE_DIRTY(lineFrame)) {
           // NOTE:  MarkLineDirty does more than just marking the line dirty.
           MarkLineDirty(line, &mLines);
           break;
         }
       }
     }
     RemoveStateBits(NS_BLOCK_LOOK_FOR_DIRTY_FRAMES);
   }
 }
 void
 nsBlockFrame::MarkLineDirty(line_iterator aLine, const nsLineList* aLineList)
 {
   // Mark aLine dirty
   aLine->MarkDirty();
   aLine->SetInvalidateTextRuns(true);
 #ifdef DEBUG
   if (gNoisyReflow) {
     IndentBy(stdout, gNoiseIndent);
     ListTag(stdout);
     printf(": mark line %p dirty\n", static_cast<void*>(aLine.get()));
   }
 #endif
   // Mark previous line dirty if it's an inline line so that it can
   // maybe pullup something from the line just affected.
   // XXX We don't need to do this if aPrevLine ends in a break-after...
   if (aLine != aLineList->front() && aLine->IsInline() &&
       aLine.prev()->IsInline()) {
     aLine.prev()->MarkDirty();
     aLine.prev()->SetInvalidateTextRuns(true);
 #ifdef DEBUG
     if (gNoisyReflow) {
       IndentBy(stdout, gNoiseIndent);
       ListTag(stdout);
       printf(": mark prev-line %p dirty\n",
              static_cast<void*>(aLine.prev().get()));
     }
 #endif
   }
 }
 /**
  * Test whether lines are certain to be aligned left so that we can make
  * resizing optimizations
  */
 static inline bool
 IsAlignedLeft(uint8_t aAlignment,
               uint8_t aDirection,
               uint8_t aUnicodeBidi,
               nsIFrame* aFrame)
 {
   return aFrame->IsSVGText() ||
          NS_STYLE_TEXT_ALIGN_LEFT == aAlignment ||
          (((NS_STYLE_TEXT_ALIGN_DEFAULT == aAlignment &&
            NS_STYLE_DIRECTION_LTR == aDirection) ||
           (NS_STYLE_TEXT_ALIGN_END == aAlignment &&
            NS_STYLE_DIRECTION_RTL == aDirection)) &&
          !(NS_STYLE_UNICODE_BIDI_PLAINTEXT & aUnicodeBidi));
 }
 void
 nsBlockFrame::PrepareResizeReflow(nsBlockReflowState& aState)
 {
   // See if we can try and avoid marking all the lines as dirty
   bool tryAndSkipLines =
     // The left content-edge must be a constant distance from the left
     // border-edge.
     !StylePadding()->mPadding.GetLeft().HasPercent();
 #ifdef DEBUG
   if (gDisableResizeOpt) {
     tryAndSkipLines = false;
   }
   if (gNoisyReflow) {
     if (!tryAndSkipLines) {
       IndentBy(stdout, gNoiseIndent);
       ListTag(stdout);
       printf(": marking all lines dirty: availWidth=%d\n",
              aState.mReflowState.AvailableWidth());
     }
   }
 #endif
   if (tryAndSkipLines) {
     nscoord newAvailWidth = aState.mReflowState.ComputedPhysicalBorderPadding().left +
                             aState.mReflowState.ComputedWidth();
     NS_ASSERTION(NS_UNCONSTRAINEDSIZE != aState.mReflowState.ComputedPhysicalBorderPadding().left &&
                  NS_UNCONSTRAINEDSIZE != aState.mReflowState.ComputedWidth(),
                  "math on NS_UNCONSTRAINEDSIZE");
 #ifdef DEBUG
     if (gNoisyReflow) {
       IndentBy(stdout, gNoiseIndent);
       ListTag(stdout);
       printf(": trying to avoid marking all lines dirty\n");
     }
 #endif
     for (line_iterator line = begin_lines(), line_end = end_lines();
          line != line_end;
          ++line)
     {
       // We let child blocks make their own decisions the same
       // way we are here.
       bool isLastLine = line == mLines.back() && !GetNextInFlow();
       if (line->IsBlock() ||
           line->HasFloats() ||
           (!isLastLine && !line->HasBreakAfter()) ||
           ((isLastLine || !line->IsLineWrapped())) ||
           line->ResizeReflowOptimizationDisabled() ||
           line->IsImpactedByFloat() ||
           (line->IEnd() > newAvailWidth)) {
         line->MarkDirty();
       }
 #ifdef REALLY_NOISY_REFLOW
       if (!line->IsBlock()) {
         printf("PrepareResizeReflow thinks line %p is %simpacted by floats\n",
                line.get(), line->IsImpactedByFloat() ? "" : "not ");
       }
 #endif
 #ifdef DEBUG
       if (gNoisyReflow && !line->IsDirty()) {
         IndentBy(stdout, gNoiseIndent + 1);
         printf("skipped: line=%p next=%p %s %s%s%s breakTypeBefore/After=%d/%d xmost=%d\n",
            static_cast<void*>(line.get()),
            static_cast<void*>((line.next() != end_lines() ? line.next().get() : nullptr)),
            line->IsBlock() ? "block" : "inline",
            line->HasBreakAfter() ? "has-break-after " : "",
            line->HasFloats() ? "has-floats " : "",
            line->IsImpactedByFloat() ? "impacted " : "",
            line->GetBreakTypeBefore(), line->GetBreakTypeAfter(),
            line->IEnd());
       }
 #endif
     }
   }
   else {
     // Mark everything dirty
     for (line_iterator line = begin_lines(), line_end = end_lines();
          line != line_end;
          ++line)
     {
       line->MarkDirty();
     }
   }
 }
 //----------------------------------------
 /**
  * Propagate reflow "damage" from from earlier lines to the current
  * line.  The reflow damage comes from the following sources:
  *  1. The regions of float damage remembered during reflow.
  *  2. The combination of nonzero |aDeltaY| and any impact by a float,
  *     either the previous reflow or now.
  *
  * When entering this function, |aLine| is still at its old position and
  * |aDeltaY| indicates how much it will later be slid (assuming it
  * doesn't get marked dirty and reflowed entirely).
  */
 void
 nsBlockFrame::PropagateFloatDamage(nsBlockReflowState& aState,
                                    nsLineBox* aLine,
                                    nscoord aDeltaY)
 {
   nsFloatManager *floatManager = aState.mReflowState.mFloatManager;
   NS_ASSERTION((aState.mReflowState.parentReflowState &&
                 aState.mReflowState.parentReflowState->mFloatManager == floatManager) ||
                 aState.mReflowState.mBlockDelta == 0, "Bad block delta passed in");
   // Check to see if there are any floats; if there aren't, there can't
   // be any float damage
   if (!floatManager->HasAnyFloats())
     return;
   // Check the damage region recorded in the float damage.
   if (floatManager->HasFloatDamage()) {
     // Need to check mBounds *and* mCombinedArea to find intersections
     // with aLine's floats
     nscoord lineYA = aLine->BStart() + aDeltaY;
     nscoord lineYB = lineYA + aLine->BSize();
     // Scrollable overflow should be sufficient for things that affect
     // layout.
     nsRect overflow = aLine->GetOverflowArea(eScrollableOverflow);
     nscoord lineYCombinedA = overflow.y + aDeltaY;
     nscoord lineYCombinedB = lineYCombinedA + overflow.height;
     if (floatManager->IntersectsDamage(lineYA, lineYB) ||
         floatManager->IntersectsDamage(lineYCombinedA, lineYCombinedB)) {
       aLine->MarkDirty();
       return;
     }
   }
   // Check if the line is moving relative to the float manager
   if (aDeltaY + aState.mReflowState.mBlockDelta != 0) {
     if (aLine->IsBlock()) {
       // Unconditionally reflow sliding blocks; we only really need to reflow
       // if there's a float impacting this block, but the current float manager
       // makes it difficult to check that.  Therefore, we let the child block
       // decide what it needs to reflow.
       aLine->MarkDirty();
     } else {
       bool wasImpactedByFloat = aLine->IsImpactedByFloat();
       nsFlowAreaRect floatAvailableSpace =
         aState.GetFloatAvailableSpaceForHeight(aLine->BStart() + aDeltaY,
                                                aLine->BSize(),
                                                nullptr);
 #ifdef REALLY_NOISY_REFLOW
     printf("nsBlockFrame::PropagateFloatDamage %p was = %d, is=%d\n",
            this, wasImpactedByFloat, floatAvailableSpace.mHasFloats);
 #endif
       // Mark the line dirty if it was or is affected by a float
       // We actually only really need to reflow if the amount of impact
       // changes, but that's not straightforward to check
       if (wasImpactedByFloat || floatAvailableSpace.mHasFloats) {
         aLine->MarkDirty();
       }
     }
   }
 }
 static bool LineHasClear(nsLineBox* aLine) {
   return aLine->IsBlock()
     ? (aLine->GetBreakTypeBefore() ||
        (aLine->mFirstChild->GetStateBits() & NS_BLOCK_HAS_CLEAR_CHILDREN) ||
        !nsBlockFrame::BlockCanIntersectFloats(aLine->mFirstChild))
     : aLine->HasFloatBreakAfter();
 }
 /**
  * Reparent a whole list of floats from aOldParent to this block.  The
  * floats might be taken from aOldParent's overflow list. They will be
  * removed from the list. They end up appended to our mFloats list.
  */
 void
 nsBlockFrame::ReparentFloats(nsIFrame* aFirstFrame, nsBlockFrame* aOldParent,
                              bool aReparentSiblings) {
   nsFrameList list;
   aOldParent->CollectFloats(aFirstFrame, list, aReparentSiblings);
   if (list.NotEmpty()) {
     for (nsIFrame* f = list.FirstChild(); f; f = f->GetNextSibling()) {
       ReparentFrame(f, aOldParent, this);
     }
     mFloats.AppendFrames(nullptr, list);
   }
 }
 static void DumpLine(const nsBlockReflowState& aState, nsLineBox* aLine,
                      nscoord aDeltaY, int32_t aDeltaIndent) {
 #ifdef DEBUG
   if (nsBlockFrame::gNoisyReflow) {
     nsRect ovis(aLine->GetVisualOverflowArea());
     nsRect oscr(aLine->GetScrollableOverflowArea());
     nsBlockFrame::IndentBy(stdout, nsBlockFrame::gNoiseIndent + aDeltaIndent);
     printf("line=%p mY=%d dirty=%s oldBounds={%d,%d,%d,%d} oldoverflow-vis={%d,%d,%d,%d} oldoverflow-scr={%d,%d,%d,%d} deltaY=%d mPrevBottomMargin=%d childCount=%d\n",
            static_cast<void*>(aLine), aState.mY,
            aLine->IsDirty() ? "yes" : "no",
            aLine->IStart(), aLine->BStart(),
            aLine->ISize(), aLine->BSize(),
            ovis.x, ovis.y, ovis.width, ovis.height,
            oscr.x, oscr.y, oscr.width, oscr.height,
            aDeltaY, aState.mPrevBottomMargin.get(), aLine->GetChildCount());
   }
 #endif
 }
 /**
  * Reflow the dirty lines
  */
 nsresult
 nsBlockFrame::ReflowDirtyLines(nsBlockReflowState& aState)
 {
   nsresult rv = NS_OK;
   bool keepGoing = true;
   bool repositionViews = false; // should we really need this?
   bool foundAnyClears = aState.mFloatBreakType != NS_STYLE_CLEAR_NONE;
   bool willReflowAgain = false;
 #ifdef DEBUG
   if (gNoisyReflow) {
     IndentBy(stdout, gNoiseIndent);
     ListTag(stdout);
     printf(": reflowing dirty lines");
     printf(" computedWidth=%d\n", aState.mReflowState.ComputedWidth());
   }
   AutoNoisyIndenter indent(gNoisyReflow);
 #endif
   bool selfDirty = (GetStateBits() & NS_FRAME_IS_DIRTY) ||
                      (aState.mReflowState.mFlags.mVResize &&
                       (GetStateBits() & NS_FRAME_CONTAINS_RELATIVE_HEIGHT));
   // Reflow our last line if our availableHeight has increased
   // so that we (and our last child) pull up content as necessary
   if (aState.mReflowState.AvailableHeight() != NS_UNCONSTRAINEDSIZE
       && GetNextInFlow() && aState.mReflowState.AvailableHeight() > mRect.height) {
     line_iterator lastLine = end_lines();
     if (lastLine != begin_lines()) {
       --lastLine;
       lastLine->MarkDirty();
     }
   }
     // the amount by which we will slide the current line if it is not
     // dirty
   nscoord deltaY = 0;
     // whether we did NOT reflow the previous line and thus we need to
     // recompute the carried out margin before the line if we want to
     // reflow it or if its previous margin is dirty
   bool needToRecoverState = false;
     // Float continuations were reflowed in ReflowPushedFloats
   bool reflowedFloat = mFloats.NotEmpty() &&
     (mFloats.FirstChild()->GetStateBits() & NS_FRAME_IS_PUSHED_FLOAT);
   bool lastLineMovedUp = false;
   // We save up information about BR-clearance here
   uint8_t inlineFloatBreakType = aState.mFloatBreakType;
   line_iterator line = begin_lines(), line_end = end_lines();
   // Reflow the lines that are already ours
   for ( ; line != line_end; ++line, aState.AdvanceToNextLine()) {
     DumpLine(aState, line, deltaY, 0);
 #ifdef DEBUG
     AutoNoisyIndenter indent2(gNoisyReflow);
 #endif
     if (selfDirty)
       line->MarkDirty();
     // This really sucks, but we have to look inside any blocks that have clear
     // elements inside them.
     // XXX what can we do smarter here?
     if (!line->IsDirty() && line->IsBlock() &&
         (line->mFirstChild->GetStateBits() & NS_BLOCK_HAS_CLEAR_CHILDREN)) {
       line->MarkDirty();
     }
     nsIFrame *replacedBlock = nullptr;
     if (line->IsBlock() &&
         !nsBlockFrame::BlockCanIntersectFloats(line->mFirstChild)) {
       replacedBlock = line->mFirstChild;
     }
     // We have to reflow the line if it's a block whose clearance
     // might have changed, so detect that.
     if (!line->IsDirty() &&
         (line->GetBreakTypeBefore() != NS_STYLE_CLEAR_NONE ||
          replacedBlock)) {
       nscoord curY = aState.mY;
       // See where we would be after applying any clearance due to
       // BRs.
       if (inlineFloatBreakType != NS_STYLE_CLEAR_NONE) {
         curY = aState.ClearFloats(curY, inlineFloatBreakType);
       }
       nscoord newY =
         aState.ClearFloats(curY, line->GetBreakTypeBefore(), replacedBlock);
       if (line->HasClearance()) {
         // Reflow the line if it might not have clearance anymore.
         if (newY == curY
             // aState.mY is the clearance point which should be the
             // top border-edge of the block frame. If sliding the
             // block by deltaY isn't going to put it in the predicted
             // position, then we'd better reflow the line.
             || newY != line->BStart() + deltaY) {
           line->MarkDirty();
         }
       } else {
         // Reflow the line if the line might have clearance now.
         if (curY != newY) {
           line->MarkDirty();
         }
       }
     }
     // We might have to reflow a line that is after a clearing BR.
     if (inlineFloatBreakType != NS_STYLE_CLEAR_NONE) {
       aState.mY = aState.ClearFloats(aState.mY, inlineFloatBreakType);
       if (aState.mY != line->BStart() + deltaY) {
         // SlideLine is not going to put the line where the clearance
         // put it. Reflow the line to be sure.
         line->MarkDirty();
       }
       inlineFloatBreakType = NS_STYLE_CLEAR_NONE;
     }
     bool previousMarginWasDirty = line->IsPreviousMarginDirty();
     if (previousMarginWasDirty) {
       // If the previous margin is dirty, reflow the current line
       line->MarkDirty();
       line->ClearPreviousMarginDirty();
     } else if (line->BEnd() + deltaY > aState.mBottomEdge) {
       // Lines that aren't dirty but get slid past our height constraint must
       // be reflowed.
       line->MarkDirty();
     }
     // If we have a constrained height (i.e., breaking columns/pages),
     // and the distance to the bottom might have changed, then we need
     // to reflow any line that might have floats in it, both because the
     // breakpoints within those floats may have changed and because we
     // might have to push/pull the floats in their entirety.
     // FIXME: What about a deltaY or height change that forces us to
     // push lines?  Why does that work?
     if (!line->IsDirty() &&
         aState.mReflowState.AvailableHeight() != NS_UNCONSTRAINEDSIZE &&
         (deltaY != 0 || aState.mReflowState.mFlags.mVResize ||
          aState.mReflowState.mFlags.mMustReflowPlaceholders) &&
         (line->IsBlock() || line->HasFloats() || line->HadFloatPushed())) {
       line->MarkDirty();
     }
     if (!line->IsDirty()) {
       // See if there's any reflow damage that requires that we mark the
       // line dirty.
       PropagateFloatDamage(aState, line, deltaY);
     }
     // If the container width has changed reset the container width. If the
     // line's writing mode is not ltr, or if the line is not left-aligned, also
     // mark the line dirty.
     if (aState.mContainerWidth != line->mContainerWidth) {
       line->mContainerWidth = aState.mContainerWidth;
       bool isLastLine = line == mLines.back() &&
                         !GetNextInFlow() &&
                         NS_STYLE_TEXT_ALIGN_AUTO == StyleText()->mTextAlignLast;
       uint8_t align = isLastLine ?
         StyleText()->mTextAlign : StyleText()->mTextAlignLast;
       if (line->mWritingMode.IsVertical() ||
           !line->mWritingMode.IsBidiLTR() ||
           !IsAlignedLeft(align,
                          aState.mReflowState.mStyleVisibility->mDirection,
                          StyleTextReset()->mUnicodeBidi, this)) {
         line->MarkDirty();
       }
     }
     if (needToRecoverState && line->IsDirty()) {
       // We need to reconstruct the bottom margin only if we didn't
       // reflow the previous line and we do need to reflow (or repair
       // the top position of) the next line.
       aState.ReconstructMarginAbove(line);
     }
     bool reflowedPrevLine = !needToRecoverState;
     if (needToRecoverState) {
       needToRecoverState = false;
       // Update aState.mPrevChild as if we had reflowed all of the frames in
       // this line.
       if (line->IsDirty()) {
         NS_ASSERTION(line->mFirstChild->GetPrevSibling() ==
                      line.prev()->LastChild(), "unexpected line frames");
         aState.mPrevChild = line->mFirstChild->GetPrevSibling();
       }
     }
     // Now repair the line and update |aState.mY| by calling
     // |ReflowLine| or |SlideLine|.
     // If we're going to reflow everything again, then no need to reflow
     // the dirty line ... unless the line has floats, in which case we'd
     // better reflow it now to refresh its float cache, which may contain
     // dangling frame pointers! Ugh! This reflow of the line may be
     // incorrect because we skipped reflowing previous lines (e.g., floats
     // may be placed incorrectly), but that's OK because we'll mark the
     // line dirty below under "if (aState.mReflowState.mDiscoveredClearance..."
     if (line->IsDirty() && (line->HasFloats() || !willReflowAgain)) {
       lastLineMovedUp = true;
       bool maybeReflowingForFirstTime =
         line->IStart() == 0 && line->BStart() == 0 &&
         line->ISize() == 0 && line->BSize() == 0;
       // Compute the dirty lines "before" BEnd, after factoring in
       // the running deltaY value - the running value is implicit in
       // aState.mY.
       nscoord oldY = line->BStart();
       nscoord oldYMost = line->BEnd();
       NS_ASSERTION(!willReflowAgain || !line->IsBlock(),
                    "Don't reflow blocks while willReflowAgain is true, reflow of block abs-pos children depends on this");
       // Reflow the dirty line. If it's an incremental reflow, then force
       // it to invalidate the dirty area if necessary
       rv = ReflowLine(aState, line, &keepGoing);
       NS_ENSURE_SUCCESS(rv, rv);
       if (aState.mReflowState.WillReflowAgainForClearance()) {
         line->MarkDirty();
         willReflowAgain = true;
         // Note that once we've entered this state, every line that gets here
         // (e.g. because it has floats) gets marked dirty and reflowed again.
         // in the next pass. This is important, see above.
       }
       if (line->HasFloats()) {
         reflowedFloat = true;
       }
       if (!keepGoing) {
         DumpLine(aState, line, deltaY, -1);
         if (0 == line->GetChildCount()) {
           DeleteLine(aState, line, line_end);
         }
         break;
       }
       // Test to see whether the margin that should be carried out
       // to the next line (NL) might have changed. In ReflowBlockFrame
       // we call nextLine->MarkPreviousMarginDirty if the block's
       // actual carried-out bottom margin changed. So here we only
       // need to worry about the following effects:
       // 1) the line was just created, and it might now be blocking
       // a carried-out bottom margin from previous lines that
       // used to reach NL from reaching NL
       // 2) the line used to be empty, and is now not empty,
       // thus blocking a carried-out bottom margin from previous lines
       // that used to reach NL from reaching NL
       // 3) the line wasn't empty, but now is, so a carried-out
       // bottom margin from previous lines that didn't used to reach NL
       // now does
       // 4) the line might have changed in a way that affects NL's
       // ShouldApplyTopMargin decision. The three things that matter
       // are the line's emptiness, its adjacency to the top of the block,
       // and whether it has clearance (the latter only matters if the block
       // was and is adjacent to the top and empty).
       //
       // If the line is empty now, we can't reliably tell if the line was empty
       // before, so we just assume it was and do nextLine->MarkPreviousMarginDirty.
       // This means the checks in 4) are redundant; if the line is empty now
       // we don't need to check 4), but if the line is not empty now and we're sure
       // it wasn't empty before, any adjacency and clearance changes are irrelevant
       // to the result of nextLine->ShouldApplyTopMargin.
       if (line.next() != end_lines()) {
         bool maybeWasEmpty = oldY == line.next()->BStart();
         bool isEmpty = line->CachedIsEmpty();
         if (maybeReflowingForFirstTime /*1*/ ||
             (isEmpty || maybeWasEmpty) /*2/3/4*/) {
           line.next()->MarkPreviousMarginDirty();
           // since it's marked dirty, nobody will care about |deltaY|
         }
       }
       // If the line was just reflowed for the first time, then its
       // old mBounds cannot be trusted so this deltaY computation is
       // bogus. But that's OK because we just did
       // MarkPreviousMarginDirty on the next line which will force it
       // to be reflowed, so this computation of deltaY will not be
       // used.
       deltaY = line->BEnd() - oldYMost;
       // Now do an interrupt check. We want to do this only in the case when we
       // actually reflow the line, so that if we get back in here we'll get
       // further on the reflow before interrupting.
       aState.mPresContext->CheckForInterrupt(this);
     } else {
       aState.mOverflowTracker->Skip(line->mFirstChild, aState.mReflowStatus);
         // Nop except for blocks (we don't create overflow container
         // continuations for any inlines atm), so only checking mFirstChild
         // is enough
       lastLineMovedUp = deltaY < 0;
       if (deltaY != 0)
         SlideLine(aState, line, deltaY);
       else
         repositionViews = true;
       NS_ASSERTION(!line->IsDirty() || !line->HasFloats(),
                    "Possibly stale float cache here!");
       if (willReflowAgain && line->IsBlock()) {
         // If we're going to reflow everything again, and this line is a block,
         // then there is no need to recover float state. The line may contain
         // other lines with floats, but in that case RecoverStateFrom would only
         // add floats to the float manager. We don't need to do that because
         // everything's going to get reflowed again "for real". Calling
         // RecoverStateFrom in this situation could be lethal because the
         // block's descendant lines may have float caches containing dangling
         // frame pointers. Ugh!
         // If this line is inline, then we need to recover its state now
         // to make sure that we don't forget to move its floats by deltaY.
       } else {
         // XXX EVIL O(N^2) EVIL
         aState.RecoverStateFrom(line, deltaY);
       }
       // Keep mY up to date in case we're propagating reflow damage
       // and also because our final height may depend on it. If the
       // line is inlines, then only update mY if the line is not
       // empty, because that's what PlaceLine does. (Empty blocks may
       // want to update mY, e.g. if they have clearance.)
       if (line->IsBlock() || !line->CachedIsEmpty()) {
         aState.mY = line->BEnd();
       }
       needToRecoverState = true;
       if (reflowedPrevLine && !line->IsBlock() &&
           aState.mPresContext->HasPendingInterrupt()) {
         // Need to make sure to pull overflows from any prev-in-flows
         for (nsIFrame* inlineKid = line->mFirstChild; inlineKid;
              inlineKid = inlineKid->GetFirstPrincipalChild()) {
           inlineKid->PullOverflowsFromPrevInFlow();
         }
       }
     }
     // Record if we need to clear floats before reflowing the next
     // line. Note that inlineFloatBreakType will be handled and
     // cleared before the next line is processed, so there is no
     // need to combine break types here.
     if (line->HasFloatBreakAfter()) {
       inlineFloatBreakType = line->GetBreakTypeAfter();
     }
     if (LineHasClear(line.get())) {
       foundAnyClears = true;
     }
     DumpLine(aState, line, deltaY, -1);
     if (aState.mPresContext->HasPendingInterrupt()) {
       willReflowAgain = true;
       // Another option here might be to leave |line| clean if
       // !HasPendingInterrupt() before the CheckForInterrupt() call, since in
       // that case the line really did reflow as it should have.  Not sure
       // whether that would be safe, so doing this for now instead.  Also not
       // sure whether we really want to mark all lines dirty after an
       // interrupt, but until we get better at propagating float damage we
       // really do need to do it this way; see comments inside MarkLineDirty.
       MarkLineDirtyForInterrupt(line);
     }
   }
   // Handle BR-clearance from the last line of the block
   if (inlineFloatBreakType != NS_STYLE_CLEAR_NONE) {
     aState.mY = aState.ClearFloats(aState.mY, inlineFloatBreakType);
   }
   if (needToRecoverState) {
     // Is this expensive?
     aState.ReconstructMarginAbove(line);
     // Update aState.mPrevChild as if we had reflowed all of the frames in
     // the last line.
     NS_ASSERTION(line == line_end || line->mFirstChild->GetPrevSibling() ==
                  line.prev()->LastChild(), "unexpected line frames");
     aState.mPrevChild =
       line == line_end ? mFrames.LastChild() : line->mFirstChild->GetPrevSibling();
   }
   // Should we really have to do this?
   if (repositionViews)
     nsContainerFrame::PlaceFrameView(this);
   // We can skip trying to pull up the next line if our height is constrained
   // (so we can report being incomplete) and there is no next in flow or we
   // were told not to or we know it will be futile, i.e.,
   // -- the next in flow is not changing
   // -- and we cannot have added more space for its first line to be
   // pulled up into,
   // -- it's an incremental reflow of a descendant
   // -- and we didn't reflow any floats (so the available space
   // didn't change)
   // -- my chain of next-in-flows either has no first line, or its first
   // line isn't dirty.
   bool heightConstrained =
     aState.mReflowState.AvailableHeight() != NS_UNCONSTRAINEDSIZE;
   bool skipPull = willReflowAgain && heightConstrained;
   if (!skipPull && heightConstrained && aState.mNextInFlow &&
       (aState.mReflowState.mFlags.mNextInFlowUntouched &&
        !lastLineMovedUp &&
        !(GetStateBits() & NS_FRAME_IS_DIRTY) &&
        !reflowedFloat)) {
     // We'll place lineIter at the last line of this block, so that
     // nsBlockInFlowLineIterator::Next() will take us to the first
     // line of my next-in-flow-chain.  (But first, check that I
     // have any lines -- if I don't, just bail out of this
     // optimization.)
     line_iterator lineIter = this->end_lines();
     if (lineIter != this->begin_lines()) {
       lineIter--; // I have lines; step back from dummy iterator to last line.
       nsBlockInFlowLineIterator bifLineIter(this, lineIter);
       // Check for next-in-flow-chain's first line.
       // (First, see if there is such a line, and second, see if it's clean)
       if (!bifLineIter.Next() ||
           !bifLineIter.GetLine()->IsDirty()) {
         skipPull=true;
       }
     }
   }
   if (skipPull && aState.mNextInFlow) {
     NS_ASSERTION(heightConstrained, "Height should be constrained here\n");
     if (IS_TRUE_OVERFLOW_CONTAINER(aState.mNextInFlow))
       NS_FRAME_SET_OVERFLOW_INCOMPLETE(aState.mReflowStatus);
     else
       NS_FRAME_SET_INCOMPLETE(aState.mReflowStatus);
   }
   if (!skipPull && aState.mNextInFlow) {
     // Pull data from a next-in-flow if there's still room for more
     // content here.
     while (keepGoing && aState.mNextInFlow) {
       // Grab first line from our next-in-flow
       nsBlockFrame* nextInFlow = aState.mNextInFlow;
       nsLineBox* pulledLine;
       nsFrameList pulledFrames;
       if (!nextInFlow->mLines.empty()) {
         RemoveFirstLine(nextInFlow->mLines, nextInFlow->mFrames,
                         &pulledLine, &pulledFrames);
       } else {
         // Grab an overflow line if there are any
         FrameLines* overflowLines = nextInFlow->GetOverflowLines();
         if (!overflowLines) {
           aState.mNextInFlow =
             static_cast<nsBlockFrame*>(nextInFlow->GetNextInFlow());
           continue;
         }
         bool last =
           RemoveFirstLine(overflowLines->mLines, overflowLines->mFrames,
                           &pulledLine, &pulledFrames);
         if (last) {
           nextInFlow->DestroyOverflowLines();
         }
       }
       if (pulledFrames.IsEmpty()) {
         // The line is empty. Try the next one.
         NS_ASSERTION(pulledLine->GetChildCount() == 0 &&
                      !pulledLine->mFirstChild, "bad empty line");
         nextInFlow->FreeLineBox(pulledLine);
         continue;
       }
       if (pulledLine == nextInFlow->GetLineCursor()) {
         nextInFlow->ClearLineCursor();
       }
       ReparentFrames(pulledFrames, nextInFlow, this);
       NS_ASSERTION(pulledFrames.LastChild() == pulledLine->LastChild(),
                    "Unexpected last frame");
       NS_ASSERTION(aState.mPrevChild || mLines.empty(), "should have a prevchild here");
       NS_ASSERTION(aState.mPrevChild == mFrames.LastChild(),
                    "Incorrect aState.mPrevChild before inserting line at end");
       // Shift pulledLine's frames into our mFrames list.
       mFrames.AppendFrames(nullptr, pulledFrames);
       // Add line to our line list, and set its last child as our new prev-child
       line = mLines.before_insert(end_lines(), pulledLine);
       aState.mPrevChild = mFrames.LastChild();
       // Reparent floats whose placeholders are in the line.
       ReparentFloats(pulledLine->mFirstChild, nextInFlow, true);
       DumpLine(aState, pulledLine, deltaY, 0);
 #ifdef DEBUG
       AutoNoisyIndenter indent2(gNoisyReflow);
 #endif
       if (aState.mPresContext->HasPendingInterrupt()) {
         MarkLineDirtyForInterrupt(line);
       } else {
         // Now reflow it and any lines that it makes during it's reflow
         // (we have to loop here because reflowing the line may cause a new
         // line to be created; see SplitLine's callers for examples of
         // when this happens).
         while (line != end_lines()) {
           rv = ReflowLine(aState, line, &keepGoing);
           NS_ENSURE_SUCCESS(rv, rv);
           if (aState.mReflowState.WillReflowAgainForClearance()) {
             line->MarkDirty();
             keepGoing = false;
             NS_FRAME_SET_INCOMPLETE(aState.mReflowStatus);
             break;
           }
           DumpLine(aState, line, deltaY, -1);
           if (!keepGoing) {
             if (0 == line->GetChildCount()) {
               DeleteLine(aState, line, line_end);
             }
             break;
           }
           if (LineHasClear(line.get())) {
             foundAnyClears = true;
           }
           if (aState.mPresContext->CheckForInterrupt(this)) {
             MarkLineDirtyForInterrupt(line);
             break;
           }
           // If this is an inline frame then its time to stop
           ++line;
           aState.AdvanceToNextLine();
         }
       }
     }
     if (NS_FRAME_IS_NOT_COMPLETE(aState.mReflowStatus)) {
       aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
     } //XXXfr shouldn't set this flag when nextinflow has no lines
   }
   // Handle an odd-ball case: a list-item with no lines
   if (HasOutsideBullet() && mLines.empty()) {
     nsHTMLReflowMetrics metrics(aState.mReflowState);
     nsIFrame* bullet = GetOutsideBullet();
     ReflowBullet(bullet, aState, metrics,
                  aState.mReflowState.ComputedPhysicalBorderPadding().top);
     NS_ASSERTION(!BulletIsEmpty() || metrics.Height() == 0,
                  "empty bullet took up space");
     if (!BulletIsEmpty()) {
       // There are no lines so we have to fake up some y motion so that
       // we end up with *some* height.
       if (metrics.TopAscent() == nsHTMLReflowMetrics::ASK_FOR_BASELINE) {
         nscoord ascent;
         if (nsLayoutUtils::GetFirstLineBaseline(bullet, &ascent)) {
           metrics.SetTopAscent(ascent);
         } else {
           metrics.SetTopAscent(metrics.Height());
         }
       }
       nsRefPtr<nsFontMetrics> fm;
       nsLayoutUtils::GetFontMetricsForFrame(this, getter_AddRefs(fm),
         nsLayoutUtils::FontSizeInflationFor(this));
       aState.mReflowState.rendContext->SetFont(fm); // FIXME: needed?
       nscoord minAscent =
         nsLayoutUtils::GetCenteredFontBaseline(fm, aState.mMinLineHeight);
       nscoord minDescent = aState.mMinLineHeight - minAscent;
       aState.mY += std::max(minAscent, metrics.TopAscent()) +
                    std::max(minDescent, metrics.Height() - metrics.TopAscent());
       nscoord offset = minAscent - metrics.TopAscent();
       if (offset > 0) {
         bullet->SetRect(bullet->GetRect() + nsPoint(0, offset));
       }
     }
   }
   if (foundAnyClears) {
     AddStateBits(NS_BLOCK_HAS_CLEAR_CHILDREN);
   } else {
     RemoveStateBits(NS_BLOCK_HAS_CLEAR_CHILDREN);
   }
 #ifdef DEBUG
   VerifyLines(true);
   VerifyOverflowSituation();
   if (gNoisyReflow) {
     IndentBy(stdout, gNoiseIndent - 1);
     ListTag(stdout);
     printf(": done reflowing dirty lines (status=%x)\n",
            aState.mReflowStatus);
   }
 #endif
   return rv;
 }
 static void MarkAllDescendantLinesDirty(nsBlockFrame* aBlock)
 {
   nsLineList::iterator line = aBlock->begin_lines();
   nsLineList::iterator endLine = aBlock->end_lines();
   while (line != endLine) {
     if (line->IsBlock()) {
       nsIFrame* f = line->mFirstChild;
       nsBlockFrame* bf = nsLayoutUtils::GetAsBlock(f);
       if (bf) {
         MarkAllDescendantLinesDirty(bf);
       }
     }
     line->MarkDirty();
     ++line;
   }
 }
 void
 nsBlockFrame::MarkLineDirtyForInterrupt(nsLineBox* aLine)
 {
   aLine->MarkDirty();
   // Just checking NS_FRAME_IS_DIRTY is ok, because we've already
   // marked the lines that need to be marked dirty based on our
   // vertical resize stuff.  So we'll definitely reflow all those kids;
   // the only question is how they should behave.
   if (GetStateBits() & NS_FRAME_IS_DIRTY) {
     // Mark all our child frames dirty so we make sure to reflow them
     // later.
     int32_t n = aLine->GetChildCount();
     for (nsIFrame* f = aLine->mFirstChild; n > 0;
          f = f->GetNextSibling(), --n) {
       f->AddStateBits(NS_FRAME_IS_DIRTY);
     }
     // And mark all the floats whose reflows we might be skipping dirty too.
     if (aLine->HasFloats()) {
       for (nsFloatCache* fc = aLine->GetFirstFloat(); fc; fc = fc->Next()) {
         fc->mFloat->AddStateBits(NS_FRAME_IS_DIRTY);
       }
     }
   } else {
     // Dirty all the descendant lines of block kids to handle float damage,
     // since our nsFloatManager will go away by the next time we're reflowing.
     // XXXbz Can we do something more like what PropagateFloatDamage does?
     // Would need to sort out the exact business with mBlockDelta for that....
     // This marks way too much dirty.  If we ever make this better, revisit
     // which lines we mark dirty in the interrupt case in ReflowDirtyLines.
     nsBlockFrame* bf = nsLayoutUtils::GetAsBlock(aLine->mFirstChild);
     if (bf) {
       MarkAllDescendantLinesDirty(bf);
     }
   }
 }
 void
 nsBlockFrame::DeleteLine(nsBlockReflowState& aState,
                          nsLineList::iterator aLine,
                          nsLineList::iterator aLineEnd)
 {
   NS_PRECONDITION(0 == aLine->GetChildCount(), "can't delete !empty line");
   if (0 == aLine->GetChildCount()) {
     NS_ASSERTION(aState.mCurrentLine == aLine,
                  "using function more generally than designed, "
                  "but perhaps OK now");
     nsLineBox* line = aLine;
     aLine = mLines.erase(aLine);
     FreeLineBox(line);
     // Mark the previous margin of the next line dirty since we need to
     // recompute its top position.
     if (aLine != aLineEnd)
       aLine->MarkPreviousMarginDirty();
   }
 }
 /**
  * Reflow a line. The line will either contain a single block frame
  * or contain 1 or more inline frames. aKeepReflowGoing indicates
  * whether or not the caller should continue to reflow more lines.
  */
 nsresult
 nsBlockFrame::ReflowLine(nsBlockReflowState& aState,
                          line_iterator aLine,
                          bool* aKeepReflowGoing)
 {
   nsresult rv = NS_OK;
   NS_ABORT_IF_FALSE(aLine->GetChildCount(), "reflowing empty line");
   // Setup the line-layout for the new line
   aState.mCurrentLine = aLine;
   aLine->ClearDirty();
   aLine->InvalidateCachedIsEmpty();
   aLine->ClearHadFloatPushed();
   // Now that we know what kind of line we have, reflow it
   if (aLine->IsBlock()) {
     rv = ReflowBlockFrame(aState, aLine, aKeepReflowGoing);
   } else {
     aLine->SetLineWrapped(false);
     rv = ReflowInlineFrames(aState, aLine, aKeepReflowGoing);
   }
   return rv;
 }
 nsIFrame*
 nsBlockFrame::PullFrame(nsBlockReflowState& aState,
                         line_iterator       aLine)
 {
   // First check our remaining lines.
   if (end_lines() != aLine.next()) {
     return PullFrameFrom(aLine, this, aLine.next());
   }
   NS_ASSERTION(!GetOverflowLines(),
     "Our overflow lines should have been removed at the start of reflow");
   // Try each next-in-flow.
   nsBlockFrame* nextInFlow = aState.mNextInFlow;
   while (nextInFlow) {
     if (nextInFlow->mLines.empty()) {
       nextInFlow->DrainSelfOverflowList();
     }
     if (!nextInFlow->mLines.empty()) {
       return PullFrameFrom(aLine, nextInFlow, nextInFlow->mLines.begin());
     }
     nextInFlow = static_cast<nsBlockFrame*>(nextInFlow->GetNextInFlow());
     aState.mNextInFlow = nextInFlow;
   }
   return nullptr;
 }
 nsIFrame*
 nsBlockFrame::PullFrameFrom(nsLineBox*           aLine,
                             nsBlockFrame*        aFromContainer,
                             nsLineList::iterator aFromLine)
 {
   nsLineBox* fromLine = aFromLine;
   NS_ABORT_IF_FALSE(fromLine, "bad line to pull from");
   NS_ABORT_IF_FALSE(fromLine->GetChildCount(), "empty line");
   NS_ABORT_IF_FALSE(aLine->GetChildCount(), "empty line");
   NS_ASSERTION(fromLine->IsBlock() == fromLine->mFirstChild->IsBlockOutside(),
                "Disagreement about whether it's a block or not");
   if (fromLine->IsBlock()) {
     // If our line is not empty and the child in aFromLine is a block
     // then we cannot pull up the frame into this line. In this case
     // we stop pulling.
     return nullptr;
   }
   // Take frame from fromLine
   nsIFrame* frame = fromLine->mFirstChild;
   nsIFrame* newFirstChild = frame->GetNextSibling();
   if (aFromContainer != this) {
     // The frame is being pulled from a next-in-flow; therefore we
     // need to add it to our sibling list.
     MOZ_ASSERT(aLine == mLines.back());
     MOZ_ASSERT(aFromLine == aFromContainer->mLines.begin(),
                "should only pull from first line");
     aFromContainer->mFrames.RemoveFrame(frame);
     // When pushing and pulling frames we need to check for whether any
     // views need to be reparented.
     ReparentFrame(frame, aFromContainer, this);
     mFrames.AppendFrame(nullptr, frame);
     // The frame might have (or contain) floats that need to be brought
     // over too. (pass 'false' since there are no siblings to check)
     ReparentFloats(frame, aFromContainer, false);
   } else {
     MOZ_ASSERT(aLine == aFromLine.prev());
   }
   aLine->NoteFrameAdded(frame);
   fromLine->NoteFrameRemoved(frame);
   if (fromLine->GetChildCount() > 0) {
     // Mark line dirty now that we pulled a child
     fromLine->MarkDirty();
     fromLine->mFirstChild = newFirstChild;
   } else {
     // Free up the fromLine now that it's empty.
     // Its bounds might need to be redrawn, though.
     if (aFromLine.next() != aFromContainer->mLines.end()) {
       aFromLine.next()->MarkPreviousMarginDirty();
     }
     aFromContainer->mLines.erase(aFromLine);
     // aFromLine is now invalid
     aFromContainer->FreeLineBox(fromLine);
   }
 #ifdef DEBUG
   VerifyLines(true);
   VerifyOverflowSituation();
 #endif
   return frame;
 }
 void
 nsBlockFrame::SlideLine(nsBlockReflowState& aState,
                         nsLineBox* aLine, nscoord aDY)
 {
   NS_PRECONDITION(aDY != 0, "why slide a line nowhere?");
   // Adjust line state
   aLine->SlideBy(aDY, aState.mContainerWidth);
   // Adjust the frames in the line
   nsIFrame* kid = aLine->mFirstChild;
   if (!kid) {
     return;
   }
   if (aLine->IsBlock()) {
     if (aDY) {
       kid->MovePositionBy(nsPoint(0, aDY));
     }
     // Make sure the frame's view and any child views are updated
     nsContainerFrame::PlaceFrameView(kid);
   }
   else {
     // Adjust the Y coordinate of the frames in the line.
     // Note: we need to re-position views even if aDY is 0, because
     // one of our parent frames may have moved and so the view's position
     // relative to its parent may have changed
     int32_t n = aLine->GetChildCount();
     while (--n >= 0) {
       if (aDY) {
         kid->MovePositionBy(nsPoint(0, aDY));
       }
       // Make sure the frame's view and any child views are updated
       nsContainerFrame::PlaceFrameView(kid);
       kid = kid->GetNextSibling();
     }
   }
 }
 nsresult
 nsBlockFrame::AttributeChanged(int32_t         aNameSpaceID,
                                nsIAtom*        aAttribute,
                                int32_t         aModType)
 {
   nsresult rv = nsBlockFrameSuper::AttributeChanged(aNameSpaceID,
                                                     aAttribute, aModType);
   if (NS_FAILED(rv)) {
     return rv;
   }
   if (nsGkAtoms::start == aAttribute ||
       (nsGkAtoms::reversed == aAttribute && mContent->IsHTML(nsGkAtoms::ol))) {
     nsPresContext* presContext = PresContext();
     // XXX Not sure if this is necessary anymore
     if (RenumberLists(presContext)) {
       presContext->PresShell()->
         FrameNeedsReflow(this, nsIPresShell::eStyleChange,
                          NS_FRAME_HAS_DIRTY_CHILDREN);
     }
   }
   else if (nsGkAtoms::value == aAttribute) {
     const nsStyleDisplay* styleDisplay = StyleDisplay();
     if (NS_STYLE_DISPLAY_LIST_ITEM == styleDisplay->mDisplay) {
       // Search for the closest ancestor that's a block frame. We
       // make the assumption that all related list items share a
       // common block parent.
       // XXXldb I think that's a bad assumption.
       nsBlockFrame* blockParent = nsLayoutUtils::FindNearestBlockAncestor(this);
       // Tell the enclosing block frame to renumber list items within
       // itself
       if (nullptr != blockParent) {
         nsPresContext* presContext = PresContext();
         // XXX Not sure if this is necessary anymore
         if (blockParent->RenumberLists(presContext)) {
           presContext->PresShell()->
             FrameNeedsReflow(blockParent, nsIPresShell::eStyleChange,
                              NS_FRAME_HAS_DIRTY_CHILDREN);
         }
       }
     }
   }
   return rv;
 }
 static inline bool
 IsNonAutoNonZeroHeight(const nsStyleCoord& aCoord)
 {
   if (aCoord.GetUnit() == eStyleUnit_Auto)
     return false;
   if (aCoord.IsCoordPercentCalcUnit()) {
     // If we evaluate the length/percent/calc at a percentage basis of
     // both nscoord_MAX and 0, and it's zero both ways, then it's a zero
     // length, percent, or combination thereof.  Test > 0 so we clamp
     // negative calc() results to 0.
     return nsRuleNode::ComputeCoordPercentCalc(aCoord, nscoord_MAX) > 0 ||
            nsRuleNode::ComputeCoordPercentCalc(aCoord, 0) > 0;
   }
   NS_ABORT_IF_FALSE(false, "unexpected unit for height or min-height");
   return true;
 }
 /* virtual */ bool
 nsBlockFrame::IsSelfEmpty()
 {
   // Blocks which are margin-roots (including inline-blocks) cannot be treated
   // as empty for margin-collapsing and other purposes. They're more like
   // replaced elements.
   if (GetStateBits() & NS_BLOCK_MARGIN_ROOT)
     return false;
   const nsStylePosition* position = StylePosition();
   if (IsNonAutoNonZeroHeight(position->mMinHeight) ||
       IsNonAutoNonZeroHeight(position->mHeight))
     return false;
   const nsStyleBorder* border = StyleBorder();
   const nsStylePadding* padding = StylePadding();
   if (border->GetComputedBorderWidth(NS_SIDE_TOP) != 0 ||
       border->GetComputedBorderWidth(NS_SIDE_BOTTOM) != 0 ||
       !nsLayoutUtils::IsPaddingZero(padding->mPadding.GetTop()) ||
       !nsLayoutUtils::IsPaddingZero(padding->mPadding.GetBottom())) {
     return false;
   }
   if (HasOutsideBullet() && !BulletIsEmpty()) {
     return false;
   }
   return true;
 }
 bool
 nsBlockFrame::CachedIsEmpty()
 {
   if (!IsSelfEmpty()) {
     return false;
   }
   for (line_iterator line = begin_lines(), line_end = end_lines();
        line != line_end;
        ++line)
   {
     if (!line->CachedIsEmpty())
       return false;
   }
   return true;
 }
 bool
 nsBlockFrame::IsEmpty()
 {
   if (!IsSelfEmpty()) {
     return false;
   }
   for (line_iterator line = begin_lines(), line_end = end_lines();
        line != line_end;
        ++line)
   {
     if (!line->IsEmpty())
       return false;
   }
   return true;
 }
 bool
 nsBlockFrame::ShouldApplyTopMargin(nsBlockReflowState& aState,
                                    nsLineBox* aLine)
 {
   if (aState.GetFlag(BRS_APPLYTOPMARGIN)) {
     // Apply short-circuit check to avoid searching the line list
     return true;
   }
   if (!aState.IsAdjacentWithTop()) {
     // If we aren't at the top Y coordinate then something of non-zero
     // height must have been placed. Therefore the childs top-margin
     // applies.
     aState.SetFlag(BRS_APPLYTOPMARGIN, true);
     return true;
   }
   // Determine if this line is "essentially" the first line
   line_iterator line = begin_lines();
   if (aState.GetFlag(BRS_HAVELINEADJACENTTOTOP)) {
     line = aState.mLineAdjacentToTop;
   }
   while (line != aLine) {
     if (!line->CachedIsEmpty() || line->HasClearance()) {
       // A line which precedes aLine is non-empty, or has clearance,
       // so therefore the top margin applies.
       aState.SetFlag(BRS_APPLYTOPMARGIN, true);
       return true;
     }
     // No need to apply the top margin if the line has floats.  We
     // should collapse anyway (bug 44419)
     ++line;
     aState.SetFlag(BRS_HAVELINEADJACENTTOTOP, true);
     aState.mLineAdjacentToTop = line;
   }
   // The line being reflowed is "essentially" the first line in the
   // block. Therefore its top-margin will be collapsed by the
   // generational collapsing logic with its parent (us).
   return false;
 }
 nsresult
 nsBlockFrame::ReflowBlockFrame(nsBlockReflowState& aState,
                                line_iterator aLine,
                                bool* aKeepReflowGoing)
 {
   NS_PRECONDITION(*aKeepReflowGoing, "bad caller");
   nsresult rv = NS_OK;
   nsIFrame* frame = aLine->mFirstChild;
   if (!frame) {
     NS_ASSERTION(false, "program error - unexpected empty line");
     return NS_ERROR_NULL_POINTER;
   }
   // Prepare the block reflow engine
   const nsStyleDisplay* display = frame->StyleDisplay();
   nsBlockReflowContext brc(aState.mPresContext, aState.mReflowState);
   uint8_t breakType = display->mBreakType;
   if (NS_STYLE_CLEAR_NONE != aState.mFloatBreakType) {
     breakType = nsLayoutUtils::CombineBreakType(breakType,
                                                 aState.mFloatBreakType);
     aState.mFloatBreakType = NS_STYLE_CLEAR_NONE;
   }
   // Clear past floats before the block if the clear style is not none
   aLine->SetBreakTypeBefore(breakType);
   // See if we should apply the top margin. If the block frame being
   // reflowed is a continuation (non-null prev-in-flow) then we don't
   // apply its top margin because it's not significant. Otherwise, dig
   // deeper.
   bool applyTopMargin =
     !frame->GetPrevInFlow() && ShouldApplyTopMargin(aState, aLine);
   if (applyTopMargin) {
     // The HasClearance setting is only valid if ShouldApplyTopMargin
     // returned false (in which case the top-margin-root set our
     // clearance flag). Otherwise clear it now. We'll set it later on
     // ourselves if necessary.
     aLine->ClearHasClearance();
   }
   bool treatWithClearance = aLine->HasClearance();
   bool mightClearFloats = breakType != NS_STYLE_CLEAR_NONE;
   nsIFrame *replacedBlock = nullptr;
   if (!nsBlockFrame::BlockCanIntersectFloats(frame)) {
     mightClearFloats = true;
     replacedBlock = frame;
   }
   // If our top margin was counted as part of some parents top-margin
   // collapse and we are being speculatively reflowed assuming this
   // frame DID NOT need clearance, then we need to check that
   // assumption.
   if (!treatWithClearance && !applyTopMargin && mightClearFloats &&
       aState.mReflowState.mDiscoveredClearance) {
     nscoord curY = aState.mY + aState.mPrevBottomMargin.get();
     nscoord clearY = aState.ClearFloats(curY, breakType, replacedBlock);
     if (clearY != curY) {
       // Looks like that assumption was invalid, we do need
       // clearance. Tell our ancestor so it can reflow again. It is
       // responsible for actually setting our clearance flag before
       // the next reflow.
       treatWithClearance = true;
       // Only record the first frame that requires clearance
       if (!*aState.mReflowState.mDiscoveredClearance) {
         *aState.mReflowState.mDiscoveredClearance = frame;
       }
       aState.mPrevChild = frame;
       // Exactly what we do now is flexible since we'll definitely be
       // reflowed.
       return NS_OK;
     }
   }
   if (treatWithClearance) {
     applyTopMargin = true;
   }
   nsIFrame* clearanceFrame = nullptr;
   nscoord startingY = aState.mY;
   nsCollapsingMargin incomingMargin = aState.mPrevBottomMargin;
   nscoord clearance;
   // Save the original position of the frame so that we can reposition
   // its view as needed.
   nsPoint originalPosition = frame->GetPosition();
   while (true) {
     clearance = 0;
     nscoord topMargin = 0;
     bool mayNeedRetry = false;
     bool clearedFloats = false;
     if (applyTopMargin) {
       // Precompute the blocks top margin value so that we can get the
       // correct available space (there might be a float that's
       // already been placed below the aState.mPrevBottomMargin
       // Setup a reflowState to get the style computed margin-top
       // value. We'll use a reason of `resize' so that we don't fudge
       // any incremental reflow state.
       // The availSpace here is irrelevant to our needs - all we want
       // out if this setup is the margin-top value which doesn't depend
       // on the childs available space.
       // XXX building a complete nsHTMLReflowState just to get the margin-top
       // seems like a waste. And we do this for almost every block!
       nsSize availSpace(aState.mContentArea.width, NS_UNCONSTRAINEDSIZE);
       nsHTMLReflowState reflowState(aState.mPresContext, aState.mReflowState,
                                     frame, availSpace);
       if (treatWithClearance) {
         aState.mY += aState.mPrevBottomMargin.get();
         aState.mPrevBottomMargin.Zero();
       }
       // Now compute the collapsed margin-top value into aState.mPrevBottomMargin, assuming
       // that all child margins collapse down to clearanceFrame.
       nsBlockReflowContext::ComputeCollapsedTopMargin(reflowState,
                                                       &aState.mPrevBottomMargin, clearanceFrame, &mayNeedRetry);
       // XXX optimization; we could check the collapsing children to see if they are sure
       // to require clearance, and so avoid retrying them
       if (clearanceFrame) {
         // Don't allow retries on the second pass. The clearance decisions for the
         // blocks whose top-margins collapse with ours are now fixed.
         mayNeedRetry = false;
       }
       if (!treatWithClearance && !clearanceFrame && mightClearFloats) {
         // We don't know if we need clearance and this is the first,
         // optimistic pass.  So determine whether *this block* needs
         // clearance. Note that we do not allow the decision for whether
         // this block has clearance to change on the second pass; that
         // decision is only allowed to be made under the optimistic
         // first pass.
         nscoord curY = aState.mY + aState.mPrevBottomMargin.get();
         nscoord clearY = aState.ClearFloats(curY, breakType, replacedBlock);
         if (clearY != curY) {
           // Looks like we need clearance and we didn't know about it already. So
           // recompute collapsed margin
           treatWithClearance = true;
           // Remember this decision, needed for incremental reflow
           aLine->SetHasClearance();
           // Apply incoming margins
           aState.mY += aState.mPrevBottomMargin.get();
           aState.mPrevBottomMargin.Zero();
           // Compute the collapsed margin again, ignoring the incoming margin this time
           mayNeedRetry = false;
           nsBlockReflowContext::ComputeCollapsedTopMargin(reflowState,
                                                           &aState.mPrevBottomMargin, clearanceFrame, &mayNeedRetry);
         }
       }
       // Temporarily advance the running Y value so that the
       // GetAvailableSpace method will return the right available
       // space. This undone as soon as the horizontal margins are
       // computed.
       topMargin = aState.mPrevBottomMargin.get();
       if (treatWithClearance) {
         nscoord currentY = aState.mY;
         // advance mY to the clear position.
         aState.mY = aState.ClearFloats(aState.mY, breakType, replacedBlock);
         clearedFloats = aState.mY != currentY;
         // Compute clearance. It's the amount we need to add to the top
         // border-edge of the frame, after applying collapsed margins
         // from the frame and its children, to get it to line up with
         // the bottom of the floats. The former is currentY + topMargin,
         // the latter is the current aState.mY.
         // Note that negative clearance is possible
         clearance = aState.mY - (currentY + topMargin);
         // Add clearance to our top margin while we compute available
         // space for the frame
         topMargin += clearance;
         // Note that aState.mY should stay where it is: at the top
         // border-edge of the frame
       } else {
         // Advance aState.mY to the top border-edge of the frame.
         aState.mY += topMargin;
       }
     }
     // Here aState.mY is the top border-edge of the block.
     // Compute the available space for the block
     nsFlowAreaRect floatAvailableSpace = aState.GetFloatAvailableSpace();
 #ifdef REALLY_NOISY_REFLOW
     printf("setting line %p isImpacted to %s\n",
            aLine.get(), floatAvailableSpace.mHasFloats?"true":"false");
 #endif
     aLine->SetLineIsImpactedByFloat(floatAvailableSpace.mHasFloats);
     nsRect availSpace;
     aState.ComputeBlockAvailSpace(frame, display, floatAvailableSpace,
                                   replacedBlock != nullptr, availSpace);
     // The check for
     //   (!aState.mReflowState.mFlags.mIsTopOfPage || clearedFloats)
     // is to some degree out of paranoia:  if we reliably eat up top
     // margins at the top of the page as we ought to, it wouldn't be
     // needed.
     if ((!aState.mReflowState.mFlags.mIsTopOfPage || clearedFloats) &&
         availSpace.height < 0) {
       // We know already that this child block won't fit on this
       // page/column due to the top margin or the clearance.  So we need
       // to get out of here now.  (If we don't, most blocks will handle
       // things fine, and report break-before, but zero-height blocks
       // won't, and will thus make their parent overly-large and force
       // *it* to be pushed in its entirety.)
       // Doing this means that we also don't need to worry about the
       // |availSpace.height += topMargin| below interacting with pushed
       // floats (which force nscoord_MAX clearance) to cause a
       // constrained height to turn into an unconstrained one.
       aState.mY = startingY;
       aState.mPrevBottomMargin = incomingMargin;
       *aKeepReflowGoing = false;
       if (ShouldAvoidBreakInside(aState.mReflowState)) {
         aState.mReflowStatus = NS_INLINE_LINE_BREAK_BEFORE();
       } else {
         PushLines(aState, aLine.prev());
         NS_FRAME_SET_INCOMPLETE(aState.mReflowStatus);
       }
       return NS_OK;
     }
     // Now put the Y coordinate back to the top of the top-margin +
     // clearance, and flow the block.
     aState.mY -= topMargin;
     availSpace.y -= topMargin;
     if (NS_UNCONSTRAINEDSIZE != availSpace.height) {
       availSpace.height += topMargin;
     }
     // Reflow the block into the available space
     // construct the html reflow state for the block. ReflowBlock
     // will initialize it
     nsHTMLReflowState blockHtmlRS(aState.mPresContext, aState.mReflowState, frame,
                                   availSpace.Size());
     blockHtmlRS.mFlags.mHasClearance = aLine->HasClearance();
     nsFloatManager::SavedState floatManagerState;
     if (mayNeedRetry) {
       blockHtmlRS.mDiscoveredClearance = &clearanceFrame;
       aState.mFloatManager->PushState(&floatManagerState);
     } else if (!applyTopMargin) {
       blockHtmlRS.mDiscoveredClearance = aState.mReflowState.mDiscoveredClearance;
     }
     nsReflowStatus frameReflowStatus = NS_FRAME_COMPLETE;
     rv = brc.ReflowBlock(availSpace, applyTopMargin, aState.mPrevBottomMargin,
                          clearance, aState.IsAdjacentWithTop(),
                          aLine.get(), blockHtmlRS, frameReflowStatus, aState);
     NS_ENSURE_SUCCESS(rv, rv);
     if (mayNeedRetry && clearanceFrame) {
       aState.mFloatManager->PopState(&floatManagerState);
       aState.mY = startingY;
       aState.mPrevBottomMargin = incomingMargin;
       continue;
     }
     aState.mPrevChild = frame;
     if (blockHtmlRS.WillReflowAgainForClearance()) {
       // If an ancestor of ours is going to reflow for clearance, we
       // need to avoid calling PlaceBlock, because it unsets dirty bits
       // on the child block (both itself, and through its call to
       // nsFrame::DidReflow), and those dirty bits imply dirtiness for
       // all of the child block, including the lines it didn't reflow.
       NS_ASSERTION(originalPosition == frame->GetPosition(),
                    "we need to call PositionChildViews");
       return NS_OK;
     }
 #if defined(REFLOW_STATUS_COVERAGE)
     RecordReflowStatus(true, frameReflowStatus);
 #endif
     if (NS_INLINE_IS_BREAK_BEFORE(frameReflowStatus)) {
       // None of the child block fits.
       *aKeepReflowGoing = false;
       if (ShouldAvoidBreakInside(aState.mReflowState)) {
         aState.mReflowStatus = NS_INLINE_LINE_BREAK_BEFORE();
       } else {
         PushLines(aState, aLine.prev());
         NS_FRAME_SET_INCOMPLETE(aState.mReflowStatus);
       }
     }
     else {
       // Note: line-break-after a block is a nop
       // Try to place the child block.
       // Don't force the block to fit if we have positive clearance, because
       // pushing it to the next page would give it more room.
       // Don't force the block to fit if it's impacted by a float. If it is,
       // then pushing it to the next page would give it more room. Note that
       // isImpacted doesn't include impact from the block's own floats.
       bool forceFit = aState.IsAdjacentWithTop() && clearance <= 0 &&
         !floatAvailableSpace.mHasFloats;
       nsCollapsingMargin collapsedBottomMargin;
       nsOverflowAreas overflowAreas;
       *aKeepReflowGoing = brc.PlaceBlock(blockHtmlRS, forceFit, aLine.get(),
                                          collapsedBottomMargin,
                                          overflowAreas,
                                          frameReflowStatus,
                                          aState.mContainerWidth);
       if (!NS_FRAME_IS_FULLY_COMPLETE(frameReflowStatus) &&
           ShouldAvoidBreakInside(aState.mReflowState)) {
         *aKeepReflowGoing = false;
       }
       if (aLine->SetCarriedOutBottomMargin(collapsedBottomMargin)) {
         line_iterator nextLine = aLine;
         ++nextLine;
         if (nextLine != end_lines()) {
           nextLine->MarkPreviousMarginDirty();
         }
       }
       aLine->SetOverflowAreas(overflowAreas);
       if (*aKeepReflowGoing) {
         // Some of the child block fit
         // Advance to new Y position
         nscoord newY = aLine->BEnd();
         aState.mY = newY;
         // Continue the block frame now if it didn't completely fit in
         // the available space.
         if (!NS_FRAME_IS_FULLY_COMPLETE(frameReflowStatus)) {
           bool madeContinuation =
             CreateContinuationFor(aState, nullptr, frame);
           nsIFrame* nextFrame = frame->GetNextInFlow();
           NS_ASSERTION(nextFrame, "We're supposed to have a next-in-flow by now");
           if (NS_FRAME_IS_NOT_COMPLETE(frameReflowStatus)) {
             // If nextFrame used to be an overflow container, make it a normal block
             if (!madeContinuation &&
                 (NS_FRAME_IS_OVERFLOW_CONTAINER & nextFrame->GetStateBits())) {
               nsOverflowContinuationTracker::AutoFinish fini(aState.mOverflowTracker, frame);
               nsContainerFrame* parent =
                 static_cast<nsContainerFrame*>(nextFrame->GetParent());
               rv = parent->StealFrame(nextFrame);
               NS_ENSURE_SUCCESS(rv, rv);
               if (parent != this)
                 ReparentFrame(nextFrame, parent, this);
               mFrames.InsertFrame(nullptr, frame, nextFrame);
               madeContinuation = true; // needs to be added to mLines
               nextFrame->RemoveStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
               frameReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
             }
             // Push continuation to a new line, but only if we actually made one.
             if (madeContinuation) {
               nsLineBox* line = NewLineBox(nextFrame, true);
               mLines.after_insert(aLine, line);
             }
             PushLines(aState, aLine);
             NS_FRAME_SET_INCOMPLETE(aState.mReflowStatus);
             // If we need to reflow the continuation of the block child,
             // then we'd better reflow our continuation
             if (frameReflowStatus & NS_FRAME_REFLOW_NEXTINFLOW) {
               aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
               // We also need to make that continuation's line dirty so
               // it gets reflowed when we reflow our next in flow. The
               // nif's line must always be either a line of the nif's
               // parent block (only if we didn't make a continuation) or
               // else one of our own overflow lines. In the latter case
               // the line is already marked dirty, so just handle the
               // first case.
               if (!madeContinuation) {
                 nsBlockFrame* nifBlock =
                   nsLayoutUtils::GetAsBlock(nextFrame->GetParent());
                 NS_ASSERTION(nifBlock,
                              "A block's child's next in flow's parent must be a block!");
                 for (line_iterator line = nifBlock->begin_lines(),
                      line_end = nifBlock->end_lines(); line != line_end; ++line) {
                   if (line->Contains(nextFrame)) {
                     line->MarkDirty();
                     break;
                   }
                 }
               }
             }
             *aKeepReflowGoing = false;
             // The bottom margin for a block is only applied on the last
             // flow block. Since we just continued the child block frame,
             // we know that line->mFirstChild is not the last flow block
             // therefore zero out the running margin value.
 #ifdef NOISY_VERTICAL_MARGINS
             ListTag(stdout);
             printf(": reflow incomplete, frame=");
             nsFrame::ListTag(stdout, frame);
             printf(" prevBottomMargin=%d, setting to zero\n",
                    aState.mPrevBottomMargin);
 #endif
             aState.mPrevBottomMargin.Zero();
           }
           else { // frame is complete but its overflow is not complete
             // Disconnect the next-in-flow and put it in our overflow tracker
             if (!madeContinuation &&
                 !(NS_FRAME_IS_OVERFLOW_CONTAINER & nextFrame->GetStateBits())) {
               // It already exists, but as a normal next-in-flow, so we need
               // to dig it out of the child lists.
               nsContainerFrame* parent = static_cast<nsContainerFrame*>
                                            (nextFrame->GetParent());
               rv = parent->StealFrame(nextFrame);
               NS_ENSURE_SUCCESS(rv, rv);
             }
             else if (madeContinuation) {
               mFrames.RemoveFrame(nextFrame);
             }
             // Put it in our overflow list
             aState.mOverflowTracker->Insert(nextFrame, frameReflowStatus);
             NS_MergeReflowStatusInto(&aState.mReflowStatus, frameReflowStatus);
 #ifdef NOISY_VERTICAL_MARGINS
             ListTag(stdout);
             printf(": reflow complete but overflow incomplete for ");
             nsFrame::ListTag(stdout, frame);
             printf(" prevBottomMargin=%d collapsedBottomMargin=%d\n",
                    aState.mPrevBottomMargin, collapsedBottomMargin.get());
 #endif
             aState.mPrevBottomMargin = collapsedBottomMargin;
           }
         }
         else { // frame is fully complete
 #ifdef NOISY_VERTICAL_MARGINS
           ListTag(stdout);
           printf(": reflow complete for ");
           nsFrame::ListTag(stdout, frame);
           printf(" prevBottomMargin=%d collapsedBottomMargin=%d\n",
                  aState.mPrevBottomMargin, collapsedBottomMargin.get());
 #endif
           aState.mPrevBottomMargin = collapsedBottomMargin;
         }
 #ifdef NOISY_VERTICAL_MARGINS
         ListTag(stdout);
         printf(": frame=");
         nsFrame::ListTag(stdout, frame);
         printf(" carriedOutBottomMargin=%d collapsedBottomMargin=%d => %d\n",
                brc.GetCarriedOutBottomMargin(), collapsedBottomMargin.get(),
                aState.mPrevBottomMargin);
 #endif
       } else {
         if ((aLine == mLines.front() && !GetPrevInFlow()) ||
             ShouldAvoidBreakInside(aState.mReflowState)) {
           // If it's our very first line *or* we're not at the top of the page
           // and we have page-break-inside:avoid, then we need to be pushed to
           // our parent's next-in-flow.
           aState.mReflowStatus = NS_INLINE_LINE_BREAK_BEFORE();
         } else {
           // Push the line that didn't fit and any lines that follow it
           // to our next-in-flow.
           PushLines(aState, aLine.prev());
           NS_FRAME_SET_INCOMPLETE(aState.mReflowStatus);
         }
       }
     }
     break; // out of the reflow retry loop
   }
   // Now that we've got its final position all figured out, position any child
   // views it may have.  Note that the case when frame has a view got handled
   // by FinishReflowChild, but that function didn't have the coordinates needed
   // to correctly decide whether to reposition child views.
   if (originalPosition != frame->GetPosition() && !frame->HasView()) {
     nsContainerFrame::PositionChildViews(frame);
   }
 #ifdef DEBUG
   VerifyLines(true);
 #endif
   return rv;
 }
 nsresult
 nsBlockFrame::ReflowInlineFrames(nsBlockReflowState& aState,
                                  line_iterator aLine,
                                  bool* aKeepReflowGoing)
 {
   nsresult rv = NS_OK;
   *aKeepReflowGoing = true;
   aLine->SetLineIsImpactedByFloat(false);
   // Setup initial coordinate system for reflowing the inline frames
   // into. Apply a previous block frame's bottom margin first.
   if (ShouldApplyTopMargin(aState, aLine)) {
     aState.mY += aState.mPrevBottomMargin.get();
   }
   nsFlowAreaRect floatAvailableSpace = aState.GetFloatAvailableSpace();
   LineReflowStatus lineReflowStatus;
   do {
     nscoord availableSpaceHeight = 0;
     do {
       bool allowPullUp = true;
       nsIContent* forceBreakInContent = nullptr;
       int32_t forceBreakOffset = -1;
       gfxBreakPriority forceBreakPriority = gfxBreakPriority::eNoBreak;
       do {
         nsFloatManager::SavedState floatManagerState;
         aState.mReflowState.mFloatManager->PushState(&floatManagerState);
         // Once upon a time we allocated the first 30 nsLineLayout objects
         // on the stack, and then we switched to the heap.  At that time
         // these objects were large (1100 bytes on a 32 bit system).
         // Then the nsLineLayout object was shrunk to 156 bytes by
         // removing some internal buffers.  Given that it is so much
         // smaller, the complexity of 2 different ways of allocating
         // no longer makes sense.  Now we always allocate on the stack.
         nsLineLayout lineLayout(aState.mPresContext,
                                 aState.mReflowState.mFloatManager,
                                 &aState.mReflowState, &aLine);
         lineLayout.Init(&aState, aState.mMinLineHeight, aState.mLineNumber);
         if (forceBreakInContent) {
           lineLayout.ForceBreakAtPosition(forceBreakInContent, forceBreakOffset);
         }
         rv = DoReflowInlineFrames(aState, lineLayout, aLine,
                                   floatAvailableSpace, availableSpaceHeight,
                                   &floatManagerState, aKeepReflowGoing,
                                   &lineReflowStatus, allowPullUp);
         lineLayout.EndLineReflow();
         if (NS_FAILED(rv)) {
           return rv;
         }
         if (LINE_REFLOW_REDO_NO_PULL == lineReflowStatus ||
             LINE_REFLOW_REDO_MORE_FLOATS == lineReflowStatus ||
             LINE_REFLOW_REDO_NEXT_BAND == lineReflowStatus) {
           if (lineLayout.NeedsBackup()) {
             NS_ASSERTION(!forceBreakInContent, "Backing up twice; this should never be necessary");
             // If there is no saved break position, then this will set
             // set forceBreakInContent to null and we won't back up, which is
             // correct.
             forceBreakInContent = lineLayout.GetLastOptionalBreakPosition(&forceBreakOffset, &forceBreakPriority);
           } else {
             forceBreakInContent = nullptr;
           }
           // restore the float manager state
           aState.mReflowState.mFloatManager->PopState(&floatManagerState);
           // Clear out float lists
           aState.mCurrentLineFloats.DeleteAll();
           aState.mBelowCurrentLineFloats.DeleteAll();
         }
         // Don't allow pullup on a subsequent LINE_REFLOW_REDO_NO_PULL pass
         allowPullUp = false;
       } while (LINE_REFLOW_REDO_NO_PULL == lineReflowStatus);
     } while (LINE_REFLOW_REDO_MORE_FLOATS == lineReflowStatus);
   } while (LINE_REFLOW_REDO_NEXT_BAND == lineReflowStatus);
   return rv;
 }
 void
 nsBlockFrame::PushTruncatedLine(nsBlockReflowState& aState,
                                 line_iterator       aLine,
                                 bool*               aKeepReflowGoing)
 {
   PushLines(aState, aLine.prev());
   *aKeepReflowGoing = false;
   NS_FRAME_SET_INCOMPLETE(aState.mReflowStatus);
 }
 #ifdef DEBUG
 static const char* LineReflowStatusNames[] = {
   "LINE_REFLOW_OK", "LINE_REFLOW_STOP", "LINE_REFLOW_REDO_NO_PULL",
   "LINE_REFLOW_REDO_MORE_FLOATS",
   "LINE_REFLOW_REDO_NEXT_BAND", "LINE_REFLOW_TRUNCATED"
 };
 #endif
 nsresult
 nsBlockFrame::DoReflowInlineFrames(nsBlockReflowState& aState,
                                    nsLineLayout& aLineLayout,
                                    line_iterator aLine,
                                    nsFlowAreaRect& aFloatAvailableSpace,
                                    nscoord& aAvailableSpaceHeight,
                                    nsFloatManager::SavedState*
                                      aFloatStateBeforeLine,
                                    bool* aKeepReflowGoing,
                                    LineReflowStatus* aLineReflowStatus,
                                    bool aAllowPullUp)
 {
   // Forget all of the floats on the line
   aLine->FreeFloats(aState.mFloatCacheFreeList);
   aState.mFloatOverflowAreas.Clear();
   // We need to set this flag on the line if any of our reflow passes
   // are impacted by floats.
   if (aFloatAvailableSpace.mHasFloats)
     aLine->SetLineIsImpactedByFloat(true);
 #ifdef REALLY_NOISY_REFLOW
   printf("nsBlockFrame::DoReflowInlineFrames %p impacted = %d\n",
          this, aFloatAvailableSpace.mHasFloats);
 #endif
   WritingMode wm = GetWritingMode(aLine->mFirstChild);
   LogicalRect lineRect(wm, aFloatAvailableSpace.mRect, aState.mContainerWidth);
   nscoord iStart = lineRect.IStart(wm);
   nscoord availISize = lineRect.ISize(wm);
   nscoord availBSize;
   if (aState.GetFlag(BRS_UNCONSTRAINEDHEIGHT)) {
     availBSize = NS_UNCONSTRAINEDSIZE;
   }
   else {
     /* XXX get the height right! */
     availBSize = lineRect.BSize(wm);
   }
   // Make sure to enable resize optimization before we call BeginLineReflow
   // because it might get disabled there
   aLine->EnableResizeReflowOptimization();
   aLineLayout.BeginLineReflow(iStart, aState.mY,
                               availISize, availBSize,
                               aFloatAvailableSpace.mHasFloats,
                               false, /*XXX isTopOfPage*/
                               wm, aState.mContainerWidth);
   aState.SetFlag(BRS_LINE_LAYOUT_EMPTY, false);
   // XXX Unfortunately we need to know this before reflowing the first
   // inline frame in the line. FIX ME.
   if ((0 == aLineLayout.GetLineNumber()) &&
       (NS_BLOCK_HAS_FIRST_LETTER_CHILD & mState) &&
       (NS_BLOCK_HAS_FIRST_LETTER_STYLE & mState)) {
     aLineLayout.SetFirstLetterStyleOK(true);
   }
   NS_ASSERTION(!((NS_BLOCK_HAS_FIRST_LETTER_CHILD & mState) &&
                  GetPrevContinuation()),
                "first letter child bit should only be on first continuation");
   // Reflow the frames that are already on the line first
   nsresult rv = NS_OK;
   LineReflowStatus lineReflowStatus = LINE_REFLOW_OK;
   int32_t i;
   nsIFrame* frame = aLine->mFirstChild;
   if (aFloatAvailableSpace.mHasFloats) {
     // There is a soft break opportunity at the start of the line, because
     // we can always move this line down below float(s).
     if (aLineLayout.NotifyOptionalBreakPosition(frame->GetContent(), 0, true, gfxBreakPriority::eNormalBreak)) {
       lineReflowStatus = LINE_REFLOW_REDO_NEXT_BAND;
     }
   }
   // need to repeatedly call GetChildCount here, because the child
   // count can change during the loop!
   for (i = 0; LINE_REFLOW_OK == lineReflowStatus && i < aLine->GetChildCount();
        i++, frame = frame->GetNextSibling()) {
     rv = ReflowInlineFrame(aState, aLineLayout, aLine, frame,
                            &lineReflowStatus);
     NS_ENSURE_SUCCESS(rv, rv);
     if (LINE_REFLOW_OK != lineReflowStatus) {
       // It is possible that one or more of next lines are empty
       // (because of DeleteNextInFlowChild). If so, delete them now
       // in case we are finished.
       ++aLine;
       while ((aLine != end_lines()) && (0 == aLine->GetChildCount())) {
         // XXX Is this still necessary now that DeleteNextInFlowChild
         // uses DoRemoveFrame?
         nsLineBox *toremove = aLine;
         aLine = mLines.erase(aLine);
         NS_ASSERTION(nullptr == toremove->mFirstChild, "bad empty line");
         FreeLineBox(toremove);
       }
       --aLine;
       NS_ASSERTION(lineReflowStatus != LINE_REFLOW_TRUNCATED,
                    "ReflowInlineFrame should never determine that a line "
                    "needs to go to the next page/column");
     }
   }
   // Don't pull up new frames into lines with continuation placeholders
   if (aAllowPullUp) {
     // Pull frames and reflow them until we can't
     while (LINE_REFLOW_OK == lineReflowStatus) {
       frame = PullFrame(aState, aLine);
       if (!frame) {
         break;
       }
       while (LINE_REFLOW_OK == lineReflowStatus) {
         int32_t oldCount = aLine->GetChildCount();
         rv = ReflowInlineFrame(aState, aLineLayout, aLine, frame,
                                &lineReflowStatus);
         NS_ENSURE_SUCCESS(rv, rv);
         if (aLine->GetChildCount() != oldCount) {
           // We just created a continuation for aFrame AND its going
           // to end up on this line (e.g. :first-letter
           // situation). Therefore we have to loop here before trying
           // to pull another frame.
           frame = frame->GetNextSibling();
         }
         else {
           break;
         }
       }
     }
   }
   aState.SetFlag(BRS_LINE_LAYOUT_EMPTY, aLineLayout.LineIsEmpty());
   // We only need to backup if the line isn't going to be reflowed again anyway
   bool needsBackup = aLineLayout.NeedsBackup() &&
     (lineReflowStatus == LINE_REFLOW_STOP || lineReflowStatus == LINE_REFLOW_OK);
   if (needsBackup && aLineLayout.HaveForcedBreakPosition()) {
   	NS_WARNING("We shouldn't be backing up more than once! "
                "Someone must have set a break opportunity beyond the available width, "
                "even though there were better break opportunities before it");
     needsBackup = false;
   }
   if (needsBackup) {
     // We need to try backing up to before a text run
     int32_t offset;
     gfxBreakPriority breakPriority;
     nsIContent* breakContent = aLineLayout.GetLastOptionalBreakPosition(&offset, &breakPriority);
     // XXX It's possible, in fact not unusual, for the break opportunity to already
     // be the end of the line. We should detect that and optimize to not
     // re-do the line.
     if (breakContent) {
       // We can back up!
       lineReflowStatus = LINE_REFLOW_REDO_NO_PULL;
     }
   } else {
     // In case we reflow this line again, remember that we don't
     // need to force any breaking
     aLineLayout.ClearOptionalBreakPosition();
   }
   if (LINE_REFLOW_REDO_NEXT_BAND == lineReflowStatus) {
     // This happens only when we have a line that is impacted by
     // floats and the first element in the line doesn't fit with
     // the floats.
     //
     // What we do is to advance past the first float we find and
     // then reflow the line all over again.
     NS_ASSERTION(NS_UNCONSTRAINEDSIZE != aFloatAvailableSpace.mRect.height,
                  "unconstrained height on totally empty line");
     // See the analogous code for blocks in nsBlockReflowState::ClearFloats.
     if (aFloatAvailableSpace.mRect.height > 0) {
       NS_ASSERTION(aFloatAvailableSpace.mHasFloats,
                    "redo line on totally empty line with non-empty band...");
       // We should never hit this case if we've placed floats on the
       // line; if we have, then the GetFloatAvailableSpace call is wrong
       // and needs to happen after the caller pops the space manager
       // state.
       aState.mFloatManager->AssertStateMatches(aFloatStateBeforeLine);
       aState.mY += aFloatAvailableSpace.mRect.height;
       aFloatAvailableSpace = aState.GetFloatAvailableSpace();
     } else {
       NS_ASSERTION(NS_UNCONSTRAINEDSIZE != aState.mReflowState.AvailableHeight(),
                    "We shouldn't be running out of height here");
       if (NS_UNCONSTRAINEDSIZE == aState.mReflowState.AvailableHeight()) {
         // just move it down a bit to try to get out of this mess
         aState.mY += 1;
         // We should never hit this case if we've placed floats on the
         // line; if we have, then the GetFloatAvailableSpace call is wrong
         // and needs to happen after the caller pops the space manager
         // state.
         aState.mFloatManager->AssertStateMatches(aFloatStateBeforeLine);
         aFloatAvailableSpace = aState.GetFloatAvailableSpace();
       } else {
         // There's nowhere to retry placing the line, so we want to push
         // it to the next page/column where its contents can fit not
         // next to a float.
         lineReflowStatus = LINE_REFLOW_TRUNCATED;
         PushTruncatedLine(aState, aLine, aKeepReflowGoing);
       }
     }
     // XXX: a small optimization can be done here when paginating:
     // if the new Y coordinate is past the end of the block then
     // push the line and return now instead of later on after we are
     // past the float.
   }
   else if (LINE_REFLOW_TRUNCATED != lineReflowStatus &&
            LINE_REFLOW_REDO_NO_PULL != lineReflowStatus) {
     // If we are propagating out a break-before status then there is
     // no point in placing the line.
     if (!NS_INLINE_IS_BREAK_BEFORE(aState.mReflowStatus)) {
       if (!PlaceLine(aState, aLineLayout, aLine, aFloatStateBeforeLine,
                      aFloatAvailableSpace.mRect, aAvailableSpaceHeight,
                      aKeepReflowGoing)) {
         lineReflowStatus = LINE_REFLOW_REDO_MORE_FLOATS;
         // PlaceLine already called GetAvailableSpaceForHeight for us.
       }
     }
   }
 #ifdef DEBUG
   if (gNoisyReflow) {
     printf("Line reflow status = %s\n", LineReflowStatusNames[lineReflowStatus]);
   }
 #endif
   if (aLineLayout.GetDirtyNextLine()) {
     // aLine may have been pushed to the overflow lines.
     FrameLines* overflowLines = GetOverflowLines();
     // We can't just compare iterators front() to aLine here, since they may be in
     // different lists.
     bool pushedToOverflowLines = overflowLines &&
       overflowLines->mLines.front() == aLine.get();
     if (pushedToOverflowLines) {
       // aLine is stale, it's associated with the main line list but it should
       // be associated with the overflow line list now
       aLine = overflowLines->mLines.begin();
     }
     nsBlockInFlowLineIterator iter(this, aLine, pushedToOverflowLines);
     if (iter.Next() && iter.GetLine()->IsInline()) {
       iter.GetLine()->MarkDirty();
       if (iter.GetContainer() != this) {
         aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
       }
     }
   }
   *aLineReflowStatus = lineReflowStatus;
   return rv;
 }
 /**
  * Reflow an inline frame. The reflow status is mapped from the frames
  * reflow status to the lines reflow status (not to our reflow status).
  * The line reflow status is simple: true means keep placing frames
  * on the line; false means don't (the line is done). If the line
  * has some sort of breaking affect then aLine's break-type will be set
  * to something other than NS_STYLE_CLEAR_NONE.
  */
 nsresult
 nsBlockFrame::ReflowInlineFrame(nsBlockReflowState& aState,
                                 nsLineLayout& aLineLayout,
                                 line_iterator aLine,
                                 nsIFrame* aFrame,
                                 LineReflowStatus* aLineReflowStatus)
 {
   NS_ENSURE_ARG_POINTER(aFrame);
   *aLineReflowStatus = LINE_REFLOW_OK;
 #ifdef NOISY_FIRST_LETTER
   ListTag(stdout);
   printf(": reflowing ");
   nsFrame::ListTag(stdout, aFrame);
   printf(" reflowingFirstLetter=%s\n",
          aLineLayout.GetFirstLetterStyleOK() ? "on" : "off");
 #endif
   // Reflow the inline frame
   nsReflowStatus frameReflowStatus;
   bool           pushedFrame;
   nsresult rv = aLineLayout.ReflowFrame(aFrame, frameReflowStatus,
                                         nullptr, pushedFrame);
   NS_ENSURE_SUCCESS(rv, rv);
   if (frameReflowStatus & NS_FRAME_REFLOW_NEXTINFLOW) {
     aLineLayout.SetDirtyNextLine();
   }
   NS_ENSURE_SUCCESS(rv, rv);
 #ifdef REALLY_NOISY_REFLOW_CHILD
   nsFrame::ListTag(stdout, aFrame);
   printf(": status=%x\n", frameReflowStatus);
 #endif
 #if defined(REFLOW_STATUS_COVERAGE)
   RecordReflowStatus(false, frameReflowStatus);
 #endif
   // Send post-reflow notification
   aState.mPrevChild = aFrame;
    /* XXX
       This is where we need to add logic to handle some odd behavior.
       For one thing, we should usually place at least one thing next
       to a left float, even when that float takes up all the width on a line.
       see bug 22496
    */
   // Process the child frames reflow status. There are 5 cases:
   // complete, not-complete, break-before, break-after-complete,
   // break-after-not-complete. There are two situations: we are a
   // block or we are an inline. This makes a total of 10 cases
   // (fortunately, there is some overlap).
   aLine->SetBreakTypeAfter(NS_STYLE_CLEAR_NONE);
   if (NS_INLINE_IS_BREAK(frameReflowStatus) ||
       (NS_STYLE_CLEAR_NONE != aState.mFloatBreakType)) {
     // Always abort the line reflow (because a line break is the
     // minimal amount of break we do).
     *aLineReflowStatus = LINE_REFLOW_STOP;
     // XXX what should aLine's break-type be set to in all these cases?
     uint8_t breakType = NS_INLINE_GET_BREAK_TYPE(frameReflowStatus);
     NS_ASSERTION((NS_STYLE_CLEAR_NONE != breakType) ||
                  (NS_STYLE_CLEAR_NONE != aState.mFloatBreakType), "bad break type");
     NS_ASSERTION(NS_STYLE_CLEAR_MAX >= breakType, "invalid break type");
     if (NS_INLINE_IS_BREAK_BEFORE(frameReflowStatus)) {
       // Break-before cases.
       if (aFrame == aLine->mFirstChild) {
         // If we break before the first frame on the line then we must
         // be trying to place content where there's no room (e.g. on a
         // line with wide floats). Inform the caller to reflow the
         // line after skipping past a float.
         *aLineReflowStatus = LINE_REFLOW_REDO_NEXT_BAND;
       }
       else {
         // It's not the first child on this line so go ahead and split
         // the line. We will see the frame again on the next-line.
         SplitLine(aState, aLineLayout, aLine, aFrame, aLineReflowStatus);
         // If we're splitting the line because the frame didn't fit and it
         // was pushed, then mark the line as having word wrapped. We need to
         // know that if we're shrink wrapping our width
         if (pushedFrame) {
           aLine->SetLineWrapped(true);
         }
       }
     }
     else {
       // If a float split and its prev-in-flow was followed by a <BR>, then combine
       // the <BR>'s break type with the inline's break type (the inline will be the very
       // next frame after the split float).
       if (NS_STYLE_CLEAR_NONE != aState.mFloatBreakType) {
         breakType = nsLayoutUtils::CombineBreakType(breakType,
                                                     aState.mFloatBreakType);
         aState.mFloatBreakType = NS_STYLE_CLEAR_NONE;
       }
       // Break-after cases
       if (breakType == NS_STYLE_CLEAR_LINE) {
         if (!aLineLayout.GetLineEndsInBR()) {
           breakType = NS_STYLE_CLEAR_NONE;
         }
       }
       aLine->SetBreakTypeAfter(breakType);
       if (NS_FRAME_IS_COMPLETE(frameReflowStatus)) {
         // Split line, but after the frame just reflowed
         SplitLine(aState, aLineLayout, aLine, aFrame->GetNextSibling(), aLineReflowStatus);
         if (NS_INLINE_IS_BREAK_AFTER(frameReflowStatus) &&
             !aLineLayout.GetLineEndsInBR()) {
           aLineLayout.SetDirtyNextLine();
         }
       }
     }
   }
   if (!NS_FRAME_IS_FULLY_COMPLETE(frameReflowStatus)) {
     // Create a continuation for the incomplete frame. Note that the
     // frame may already have a continuation.
     CreateContinuationFor(aState, aLine, aFrame);
     // Remember that the line has wrapped
     if (!aLineLayout.GetLineEndsInBR()) {
       aLine->SetLineWrapped(true);
     }
     // If we just ended a first-letter frame or reflowed a placeholder then
     // don't split the line and don't stop the line reflow...
     // But if we are going to stop anyways we'd better split the line.
     if ((!(frameReflowStatus & NS_INLINE_BREAK_FIRST_LETTER_COMPLETE) &&
          nsGkAtoms::placeholderFrame != aFrame->GetType()) ||
         *aLineReflowStatus == LINE_REFLOW_STOP) {
       // Split line after the current frame
       *aLineReflowStatus = LINE_REFLOW_STOP;
       SplitLine(aState, aLineLayout, aLine, aFrame->GetNextSibling(), aLineReflowStatus);
     }
   }
   return NS_OK;
 }
 bool
 nsBlockFrame::CreateContinuationFor(nsBlockReflowState& aState,
                                     nsLineBox*          aLine,
                                     nsIFrame*           aFrame)
 {
   nsIFrame* newFrame = nullptr;
   if (!aFrame->GetNextInFlow()) {
     newFrame = aState.mPresContext->PresShell()->FrameConstructor()->
       CreateContinuingFrame(aState.mPresContext, aFrame, this);
     mFrames.InsertFrame(nullptr, aFrame, newFrame);
     if (aLine) {
       aLine->NoteFrameAdded(newFrame);
     }
   }
 #ifdef DEBUG
   VerifyLines(false);
 #endif
   return !!newFrame;
 }
 nsresult
 nsBlockFrame::SplitFloat(nsBlockReflowState& aState,
                          nsIFrame*           aFloat,
                          nsReflowStatus      aFloatStatus)
 {
   nsIFrame* nextInFlow = aFloat->GetNextInFlow();
   if (nextInFlow) {
     nsContainerFrame *oldParent =
       static_cast<nsContainerFrame*>(nextInFlow->GetParent());
     DebugOnly<nsresult> rv = oldParent->StealFrame(nextInFlow);
     NS_ASSERTION(NS_SUCCEEDED(rv), "StealFrame failed");
     if (oldParent != this) {
       ReparentFrame(nextInFlow, oldParent, this);
     }
   } else {
     nextInFlow = aState.mPresContext->PresShell()->FrameConstructor()->
       CreateContinuingFrame(aState.mPresContext, aFloat, this);
   }
   if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aFloatStatus))
     aFloat->GetNextInFlow()->AddStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
   // The containing block is now overflow-incomplete.
   NS_FRAME_SET_OVERFLOW_INCOMPLETE(aState.mReflowStatus);
   if (aFloat->StyleDisplay()->mFloats == NS_STYLE_FLOAT_LEFT) {
     aState.mFloatManager->SetSplitLeftFloatAcrossBreak();
   } else {
     NS_ABORT_IF_FALSE(aFloat->StyleDisplay()->mFloats ==
                         NS_STYLE_FLOAT_RIGHT, "unexpected float side");
     aState.mFloatManager->SetSplitRightFloatAcrossBreak();
   }
   aState.AppendPushedFloat(nextInFlow);
   return NS_OK;
 }
 static nsFloatCache*
 GetLastFloat(nsLineBox* aLine)
 {
   nsFloatCache* fc = aLine->GetFirstFloat();
   while (fc && fc->Next()) {
     fc = fc->Next();
   }
   return fc;
 }
 static bool
 CheckPlaceholderInLine(nsIFrame* aBlock, nsLineBox* aLine, nsFloatCache* aFC)
 {
   if (!aFC)
     return true;
   NS_ASSERTION(!aFC->mFloat->GetPrevContinuation(),
                "float in a line should never be a continuation");
   NS_ASSERTION(!(aFC->mFloat->GetStateBits() & NS_FRAME_IS_PUSHED_FLOAT),
                "float in a line should never be a pushed float");
   nsIFrame* ph = aBlock->PresContext()->FrameManager()->
                    GetPlaceholderFrameFor(aFC->mFloat->FirstInFlow());
   for (nsIFrame* f = ph; f; f = f->GetParent()) {
     if (f->GetParent() == aBlock)
       return aLine->Contains(f);
   }
   NS_ASSERTION(false, "aBlock is not an ancestor of aFrame!");
   return true;
 }
 void
 nsBlockFrame::SplitLine(nsBlockReflowState& aState,
                         nsLineLayout& aLineLayout,
                         line_iterator aLine,
                         nsIFrame* aFrame,
                         LineReflowStatus* aLineReflowStatus)
 {
   NS_ABORT_IF_FALSE(aLine->IsInline(), "illegal SplitLine on block line");
   int32_t pushCount = aLine->GetChildCount() - aLineLayout.GetCurrentSpanCount();
   NS_ABORT_IF_FALSE(pushCount >= 0, "bad push count");
 #ifdef DEBUG
   if (gNoisyReflow) {
     nsFrame::IndentBy(stdout, gNoiseIndent);
     printf("split line: from line=%p pushCount=%d aFrame=",
            static_cast<void*>(aLine.get()), pushCount);
     if (aFrame) {
       nsFrame::ListTag(stdout, aFrame);
     }
     else {
       printf("(null)");
     }
     printf("\n");
     if (gReallyNoisyReflow) {
       aLine->List(stdout, gNoiseIndent+1);
     }
   }
 #endif
   if (0 != pushCount) {
     NS_ABORT_IF_FALSE(aLine->GetChildCount() > pushCount, "bad push");
     NS_ABORT_IF_FALSE(nullptr != aFrame, "whoops");
 #ifdef DEBUG
     {
       nsIFrame *f = aFrame;
       int32_t count = pushCount;
       while (f && count > 0) {
         f = f->GetNextSibling();
         --count;
       }
       NS_ASSERTION(count == 0, "Not enough frames to push");
     }
 #endif
     // Put frames being split out into their own line
     nsLineBox* newLine = NewLineBox(aLine, aFrame, pushCount);
     mLines.after_insert(aLine, newLine);
 #ifdef DEBUG
     if (gReallyNoisyReflow) {
       newLine->List(stdout, gNoiseIndent+1);
     }
 #endif
     // Let line layout know that some frames are no longer part of its
     // state.
     aLineLayout.SplitLineTo(aLine->GetChildCount());
     // If floats have been placed whose placeholders have been pushed to the new
     // line, we need to reflow the old line again. We don't want to look at the
     // frames in the new line, because as a large paragraph is laid out the
     // we'd get O(N^2) performance. So instead we just check that the last
     // float and the last below-current-line float are still in aLine.
     if (!CheckPlaceholderInLine(this, aLine, GetLastFloat(aLine)) ||
         !CheckPlaceholderInLine(this, aLine, aState.mBelowCurrentLineFloats.Tail())) {
       *aLineReflowStatus = LINE_REFLOW_REDO_NO_PULL;
     }
 #ifdef DEBUG
     VerifyLines(true);
 #endif
   }
 }
 bool
 nsBlockFrame::IsLastLine(nsBlockReflowState& aState,
                          line_iterator aLine)
 {
   while (++aLine != end_lines()) {
     // There is another line
     if (0 != aLine->GetChildCount()) {
       // If the next line is a block line then this line is the last in a
       // group of inline lines.
       return aLine->IsBlock();
     }
     // The next line is empty, try the next one
   }
   // XXX Not sure about this part
   // Try our next-in-flows lines to answer the question
   nsBlockFrame* nextInFlow = (nsBlockFrame*) GetNextInFlow();
   while (nullptr != nextInFlow) {
     for (line_iterator line = nextInFlow->begin_lines(),
                    line_end = nextInFlow->end_lines();
          line != line_end;
          ++line)
     {
       if (0 != line->GetChildCount())
         return line->IsBlock();
     }
     nextInFlow = (nsBlockFrame*) nextInFlow->GetNextInFlow();
   }
   // This is the last line - so don't allow justification
   return true;
 }
 bool
 nsBlockFrame::PlaceLine(nsBlockReflowState& aState,
                         nsLineLayout&       aLineLayout,
                         line_iterator       aLine,
                         nsFloatManager::SavedState *aFloatStateBeforeLine,
                         nsRect&             aFloatAvailableSpace,
                         nscoord&            aAvailableSpaceHeight,
                         bool*             aKeepReflowGoing)
 {
   // Trim extra white-space from the line before placing the frames
   aLineLayout.TrimTrailingWhiteSpace();
   // Vertically align the frames on this line.
   //
   // According to the CSS2 spec, section 12.6.1, the "marker" box
   // participates in the height calculation of the list-item box's
   // first line box.
   //
   // There are exactly two places a bullet can be placed: near the
   // first or second line. It's only placed on the second line in a
   // rare case: when the first line is empty.
   bool addedBullet = false;
   if (HasOutsideBullet() &&
       ((aLine == mLines.front() &&
         (!aLineLayout.IsZeroBSize() || (aLine == mLines.back()))) ||
        (mLines.front() != mLines.back() &&
 == mLines.front()->BSize() &&
         aLine == mLines.begin().next()))) {
     nsHTMLReflowMetrics metrics(aState.mReflowState);
     nsIFrame* bullet = GetOutsideBullet();
     ReflowBullet(bullet, aState, metrics, aState.mY);
     NS_ASSERTION(!BulletIsEmpty() || metrics.Height() == 0,
                  "empty bullet took up space");
     aLineLayout.AddBulletFrame(bullet, metrics);
     addedBullet = true;
   }
   aLineLayout.BlockDirAlignLine();
   // We want to compare to the available space that we would have had in
   // the line's height *before* we placed any floats in the line itself.
   // Floats that are in the line are handled during line reflow (and may
   // result in floats being pushed to below the line or (I HOPE???) in a
   // reflow with a forced break position).
   nsRect oldFloatAvailableSpace(aFloatAvailableSpace);
   // As we redo for floats, we can't reduce the amount of height we're
   // checking.
   aAvailableSpaceHeight = std::max(aAvailableSpaceHeight, aLine->BSize());
   aFloatAvailableSpace =
     aState.GetFloatAvailableSpaceForHeight(aLine->BStart(),
                                            aAvailableSpaceHeight,
                                            aFloatStateBeforeLine).mRect;
   NS_ASSERTION(aFloatAvailableSpace.y == oldFloatAvailableSpace.y, "yikes");
   // Restore the height to the position of the next band.
   aFloatAvailableSpace.height = oldFloatAvailableSpace.height;
   // If the available space between the floats is smaller now that we
   // know the height, return false (and cause another pass with
   // LINE_REFLOW_REDO_MORE_FLOATS).
   if (AvailableSpaceShrunk(oldFloatAvailableSpace, aFloatAvailableSpace)) {
     return false;
   }
 #ifdef DEBUG
   {
     static nscoord lastHeight = 0;
     if (CRAZY_SIZE(aLine->BStart())) {
       lastHeight = aLine->BStart();
       if (abs(aLine->BStart() - lastHeight) > CRAZY_COORD/10) {
         nsFrame::ListTag(stdout);
         printf(": line=%p y=%d line.bounds.height=%d\n",
                static_cast<void*>(aLine.get()),
                aLine->BStart(), aLine->BSize());
       }
     }
     else {
       lastHeight = 0;
     }
   }
 #endif
   // Only block frames horizontally align their children because
   // inline frames "shrink-wrap" around their children (therefore
   // there is no extra horizontal space).
   const nsStyleText* styleText = StyleText();
   /**
    * text-align-last defaults to the same value as text-align when
    * text-align-last is set to auto (except when text-align is set to justify),
    * so in that case we don't need to set isLastLine.
    *
    * In other words, isLastLine really means isLastLineAndWeCare.
    */
   bool isLastLine =
     !IsSVGText() &&
     ((NS_STYLE_TEXT_ALIGN_AUTO != styleText->mTextAlignLast ||
       NS_STYLE_TEXT_ALIGN_JUSTIFY == styleText->mTextAlign) &&
      (aLineLayout.GetLineEndsInBR() ||
       IsLastLine(aState, aLine)));
   aLineLayout.InlineDirAlignFrames(aLine, isLastLine);
   // From here on, pfd->mBounds rectangles are incorrect because bidi
   // might have moved frames around!
   nsOverflowAreas overflowAreas;
   aLineLayout.RelativePositionFrames(overflowAreas);
   aLine->SetOverflowAreas(overflowAreas);
   if (addedBullet) {
     aLineLayout.RemoveBulletFrame(GetOutsideBullet());
   }
   // Inline lines do not have margins themselves; however they are
   // impacted by prior block margins. If this line ends up having some
   // height then we zero out the previous bottom margin value that was
   // already applied to the line's starting Y coordinate. Otherwise we
   // leave it be so that the previous blocks bottom margin can be
   // collapsed with a block that follows.
   nscoord newY;
   if (!aLine->CachedIsEmpty()) {
     // This line has some height. Therefore the application of the
     // previous-bottom-margin should stick.
     aState.mPrevBottomMargin.Zero();
     newY = aLine->BEnd();
   }
   else {
     // Don't let the previous-bottom-margin value affect the newY
     // coordinate (it was applied in ReflowInlineFrames speculatively)
     // since the line is empty.
     // We already called |ShouldApplyTopMargin|, and if we applied it
     // then BRS_APPLYTOPMARGIN is set.
     nscoord dy = aState.GetFlag(BRS_APPLYTOPMARGIN)
                    ? -aState.mPrevBottomMargin.get() : 0;
     newY = aState.mY + dy;
   }
   if (!NS_FRAME_IS_FULLY_COMPLETE(aState.mReflowStatus) &&
       ShouldAvoidBreakInside(aState.mReflowState)) {
     aLine->AppendFloats(aState.mCurrentLineFloats);
     aState.mReflowStatus = NS_INLINE_LINE_BREAK_BEFORE();
     return true;
   }
   // See if the line fit (our first line always does).
   if (mLines.front() != aLine &&
       newY > aState.mBottomEdge &&
       aState.mBottomEdge != NS_UNCONSTRAINEDSIZE) {
     NS_ASSERTION(aState.mCurrentLine == aLine, "oops");
     if (ShouldAvoidBreakInside(aState.mReflowState)) {
       // All our content doesn't fit, start on the next page.
       aState.mReflowStatus = NS_INLINE_LINE_BREAK_BEFORE();
     } else {
       // Push aLine and all of its children and anything else that
       // follows to our next-in-flow.
       PushTruncatedLine(aState, aLine, aKeepReflowGoing);
     }
     return true;
   }
   aState.mY = newY;
   // Add the already placed current-line floats to the line
   aLine->AppendFloats(aState.mCurrentLineFloats);
   // Any below current line floats to place?
   if (aState.mBelowCurrentLineFloats.NotEmpty()) {
     // Reflow the below-current-line floats, which places on the line's
     // float list.
     aState.PlaceBelowCurrentLineFloats(aState.mBelowCurrentLineFloats, aLine);
     aLine->AppendFloats(aState.mBelowCurrentLineFloats);
   }
   // When a line has floats, factor them into the combined-area
   // computations.
   if (aLine->HasFloats()) {
     // Combine the float combined area (stored in aState) and the
     // value computed by the line layout code.
     nsOverflowAreas lineOverflowAreas;
     NS_FOR_FRAME_OVERFLOW_TYPES(otype) {
       nsRect &o = lineOverflowAreas.Overflow(otype);
       o = aLine->GetOverflowArea(otype);
 #ifdef NOISY_COMBINED_AREA
       ListTag(stdout);
       printf(": overflow %d lineCA=%d,%d,%d,%d floatCA=%d,%d,%d,%d\n",
              otype,
              o.x, o.y, o.width, o.height,
              aState.mFloatOverflowAreas.Overflow(otype).x,
              aState.mFloatOverflowAreas.Overflow(otype).y,
              aState.mFloatOverflowAreas.Overflow(otype).width,
              aState.mFloatOverflowAreas.Overflow(otype).height);
 #endif
       o.UnionRect(aState.mFloatOverflowAreas.Overflow(otype), o);
 #ifdef NOISY_COMBINED_AREA
       printf("  ==> final lineCA=%d,%d,%d,%d\n",
              o.x, o.y, o.width, o.height);
 #endif
     }
     aLine->SetOverflowAreas(lineOverflowAreas);
   }
   // Apply break-after clearing if necessary
   // This must stay in sync with |ReflowDirtyLines|.
   if (aLine->HasFloatBreakAfter()) {
     aState.mY = aState.ClearFloats(aState.mY, aLine->GetBreakTypeAfter());
   }
   return true;
 }
 void
 nsBlockFrame::PushLines(nsBlockReflowState&  aState,
                         nsLineList::iterator aLineBefore)
 {
   // NOTE: aLineBefore is always a normal line, not an overflow line.
   // The following expression will assert otherwise.
   DebugOnly<bool> check = aLineBefore == mLines.begin();
   nsLineList::iterator overBegin(aLineBefore.next());
   // PushTruncatedPlaceholderLine sometimes pushes the first line.  Ugh.
   bool firstLine = overBegin == begin_lines();
   if (overBegin != end_lines()) {
     // Remove floats in the lines from mFloats
     nsFrameList floats;
     CollectFloats(overBegin->mFirstChild, floats, true);
     if (floats.NotEmpty()) {
       // Push the floats onto the front of the overflow out-of-flows list
       nsAutoOOFFrameList oofs(this);
       oofs.mList.InsertFrames(nullptr, nullptr, floats);
     }
     // overflow lines can already exist in some cases, in particular,
     // when shrinkwrapping and we discover that the shrinkwap causes
     // the height of some child block to grow which creates additional
     // overflowing content. In such cases we must prepend the new
     // overflow to the existing overflow.
     FrameLines* overflowLines = RemoveOverflowLines();
     if (!overflowLines) {
       // XXXldb use presshell arena!
       overflowLines = new FrameLines();
     }
     if (overflowLines) {
       nsIFrame* lineBeforeLastFrame;
       if (firstLine) {
         lineBeforeLastFrame = nullptr; // removes all frames
       } else {
         nsIFrame* f = overBegin->mFirstChild;
         lineBeforeLastFrame = f ? f->GetPrevSibling() : mFrames.LastChild();
         NS_ASSERTION(!f || lineBeforeLastFrame == aLineBefore->LastChild(),
                      "unexpected line frames");
       }
       nsFrameList pushedFrames = mFrames.RemoveFramesAfter(lineBeforeLastFrame);
       overflowLines->mFrames.InsertFrames(nullptr, nullptr, pushedFrames);
       overflowLines->mLines.splice(overflowLines->mLines.begin(), mLines,
                                     overBegin, end_lines());
       NS_ASSERTION(!overflowLines->mLines.empty(), "should not be empty");
       // this takes ownership but it won't delete it immediately so we
       // can keep using it.
       SetOverflowLines(overflowLines);
       // Mark all the overflow lines dirty so that they get reflowed when
       // they are pulled up by our next-in-flow.
       // XXXldb Can this get called O(N) times making the whole thing O(N^2)?
       for (line_iterator line = overflowLines->mLines.begin(),
              line_end = overflowLines->mLines.end();
            line != line_end;
            ++line)
       {
         line->MarkDirty();
         line->MarkPreviousMarginDirty();
         line->SetBoundsEmpty();
         if (line->HasFloats()) {
           line->FreeFloats(aState.mFloatCacheFreeList);
         }
       }
     }
   }
 #ifdef DEBUG
   VerifyOverflowSituation();
 #endif
 }
 // The overflowLines property is stored as a pointer to a line list,
 // which must be deleted.  However, the following functions all maintain
 // the invariant that the property is never set if the list is empty.
 bool
 nsBlockFrame::DrainOverflowLines()
 {
 #ifdef DEBUG
   VerifyOverflowSituation();
 #endif
   // Steal the prev-in-flow's overflow lines and prepend them.
   bool didFindOverflow = false;
   nsBlockFrame* prevBlock = static_cast<nsBlockFrame*>(GetPrevInFlow());
   if (prevBlock) {
     prevBlock->ClearLineCursor();
     FrameLines* overflowLines = prevBlock->RemoveOverflowLines();
     if (overflowLines) {
       // Make all the frames on the overflow line list mine.
       ReparentFrames(overflowLines->mFrames, prevBlock, this);
       // Make the overflow out-of-flow frames mine too.
       nsAutoOOFFrameList oofs(prevBlock);
       if (oofs.mList.NotEmpty()) {
         ReparentFrames(oofs.mList, prevBlock, this);
         mFloats.InsertFrames(nullptr, nullptr, oofs.mList);
       }
       if (!mLines.empty()) {
         // Remember to recompute the margins on the first line. This will
         // also recompute the correct deltaY if necessary.
         mLines.front()->MarkPreviousMarginDirty();
       }
       // The overflow lines have already been marked dirty and their previous
       // margins marked dirty also.
       // Prepend the overflow frames/lines to our principal list.
       mFrames.InsertFrames(nullptr, nullptr, overflowLines->mFrames);
       mLines.splice(mLines.begin(), overflowLines->mLines);
       NS_ASSERTION(overflowLines->mLines.empty(), "splice should empty list");
       delete overflowLines;
       didFindOverflow = true;
     }
   }
   // Now append our own overflow lines.
   return DrainSelfOverflowList() || didFindOverflow;
 }
 bool
 nsBlockFrame::DrainSelfOverflowList()
 {
   nsAutoPtr<FrameLines> ourOverflowLines(RemoveOverflowLines());
   if (!ourOverflowLines) {
     return false;
   }
   // No need to reparent frames in our own overflow lines/oofs, because they're
   // already ours. But we should put overflow floats back in mFloats.
   nsAutoOOFFrameList oofs(this);
   if (oofs.mList.NotEmpty()) {
     // The overflow floats go after our regular floats.
     mFloats.AppendFrames(nullptr, oofs.mList);
   }
   if (!ourOverflowLines->mLines.empty()) {
     mFrames.AppendFrames(nullptr, ourOverflowLines->mFrames);
     mLines.splice(mLines.end(), ourOverflowLines->mLines);
   }
   return true;
 }
 /**
  * Pushed floats are floats whose placeholders are in a previous
  * continuation.  They might themselves be next-continuations of a float
  * that partially fit in an earlier continuation, or they might be the
  * first continuation of a float that couldn't be placed at all.
  *
  * Pushed floats live permanently at the beginning of a block's float
  * list, where they must live *before* any floats whose placeholders are
  * in that block.
  *
  * Temporarily, during reflow, they also live on the pushed floats list,
  * which only holds them between (a) when one continuation pushes them to
  * its pushed floats list because they don't fit and (b) when the next
  * continuation pulls them onto the beginning of its float list.
  *
  * DrainPushedFloats sets up pushed floats the way we need them at the
  * start of reflow; they are then reflowed by ReflowPushedFloats (which
  * might push some of them on).  Floats with placeholders in this block
  * are reflowed by (nsBlockReflowState/nsLineLayout)::AddFloat, which
  * also maintains these invariants.
  */
 void
 nsBlockFrame::DrainPushedFloats(nsBlockReflowState& aState)
 {
 #ifdef DEBUG
   // Between when we drain pushed floats and when we complete reflow,
   // we're allowed to have multiple continuations of the same float on
   // our floats list, since a first-in-flow might get pushed to a later
   // continuation of its containing block.  But it's not permitted
   // outside that time.
   nsLayoutUtils::AssertNoDuplicateContinuations(this, mFloats);
 #endif
   // If we're getting reflowed multiple times without our
   // next-continuation being reflowed, we might need to pull back floats
   // that we just put in the list to be pushed to our next-in-flow.
   // We don't want to pull back any next-in-flows of floats on our own
   // float list, and we only need to pull back first-in-flows whose
   // placeholders were in earlier blocks (since first-in-flows whose
   // placeholders are in this block will get pulled appropriately by
   // AddFloat, and will then be more likely to be in the correct order).
   // FIXME: What if there's a continuation in our pushed floats list
   // whose prev-in-flow is in a previous continuation of this block
   // rather than this block?  Might we need to pull it back so we don't
   // report ourselves complete?
   // FIXME: Maybe we should just pull all of them back?
   nsPresContext* presContext = PresContext();
   nsFrameList* ourPushedFloats = GetPushedFloats();
   if (ourPushedFloats) {
     // When we pull back floats, we want to put them with the pushed
     // floats, which must live at the start of our float list, but we
     // want them at the end of those pushed floats.
     // FIXME: This isn't quite right!  What if they're all pushed floats?
     nsIFrame *insertionPrevSibling = nullptr; /* beginning of list */
     for (nsIFrame* f = mFloats.FirstChild();
          f && (f->GetStateBits() & NS_FRAME_IS_PUSHED_FLOAT);
          f = f->GetNextSibling()) {
       insertionPrevSibling = f;
     }
     for (nsIFrame *f = ourPushedFloats->LastChild(), *next; f; f = next) {
       next = f->GetPrevSibling();
       if (f->GetPrevContinuation()) {
         // FIXME
       } else {
         nsPlaceholderFrame *placeholder =
           presContext->FrameManager()->GetPlaceholderFrameFor(f);
         nsIFrame *floatOriginalParent = presContext->PresShell()->
           FrameConstructor()->GetFloatContainingBlock(placeholder);
         if (floatOriginalParent != this) {
           // This is a first continuation that was pushed from one of our
           // previous continuations.  Take it out of the pushed floats
           // list and put it in our floats list, before any of our
           // floats, but after other pushed floats.
           ourPushedFloats->RemoveFrame(f);
           mFloats.InsertFrame(nullptr, insertionPrevSibling, f);
         }
       }
     }
     if (ourPushedFloats->IsEmpty()) {
       RemovePushedFloats()->Delete(presContext->PresShell());
     }
   }
   // After our prev-in-flow has completed reflow, it may have a pushed
   // floats list, containing floats that we need to own.  Take these.
   nsBlockFrame* prevBlock = static_cast<nsBlockFrame*>(GetPrevInFlow());
   if (prevBlock) {
     AutoFrameListPtr list(presContext, prevBlock->RemovePushedFloats());
     if (list && list->NotEmpty()) {
       mFloats.InsertFrames(this, nullptr, *list);
     }
   }
 }
 nsBlockFrame::FrameLines*
 nsBlockFrame::GetOverflowLines() const
 {
   if (!HasOverflowLines()) {
     return nullptr;
   }
   FrameLines* prop =
     static_cast<FrameLines*>(Properties().Get(OverflowLinesProperty()));
   NS_ASSERTION(prop && !prop->mLines.empty() &&
                prop->mLines.front()->GetChildCount() == 0 ? prop->mFrames.IsEmpty() :
                  prop->mLines.front()->mFirstChild == prop->mFrames.FirstChild(),
                "value should always be stored and non-empty when state set");
   return prop;
 }
 nsBlockFrame::FrameLines*
 nsBlockFrame::RemoveOverflowLines()
 {
   if (!HasOverflowLines()) {
     return nullptr;
   }
   FrameLines* prop =
     static_cast<FrameLines*>(Properties().Remove(OverflowLinesProperty()));
   NS_ASSERTION(prop && !prop->mLines.empty() &&
                prop->mLines.front()->GetChildCount() == 0 ? prop->mFrames.IsEmpty() :
                  prop->mLines.front()->mFirstChild == prop->mFrames.FirstChild(),
                "value should always be stored and non-empty when state set");
   RemoveStateBits(NS_BLOCK_HAS_OVERFLOW_LINES);
   return prop;
 }
 void
 nsBlockFrame::DestroyOverflowLines()
 {
   NS_ASSERTION(HasOverflowLines(), "huh?");
   FrameLines* prop =
     static_cast<FrameLines*>(Properties().Remove(OverflowLinesProperty()));
   NS_ASSERTION(prop && prop->mLines.empty(),
                "value should always be stored but empty when destroying");
   RemoveStateBits(NS_BLOCK_HAS_OVERFLOW_LINES);
   delete prop;
 }
 // This takes ownership of aOverflowLines.
 // XXX We should allocate overflowLines from presShell arena!
 void
 nsBlockFrame::SetOverflowLines(FrameLines* aOverflowLines)
 {
   NS_ASSERTION(aOverflowLines, "null lines");
   NS_ASSERTION(!aOverflowLines->mLines.empty(), "empty lines");
   NS_ASSERTION(aOverflowLines->mLines.front()->mFirstChild ==
                aOverflowLines->mFrames.FirstChild(),
                "invalid overflow lines / frames");
   NS_ASSERTION(!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_LINES),
                "Overwriting existing overflow lines");
   FrameProperties props = Properties();
   // Verify that we won't overwrite an existing overflow list
   NS_ASSERTION(!props.Get(OverflowLinesProperty()), "existing overflow list");
   props.Set(OverflowLinesProperty(), aOverflowLines);
   AddStateBits(NS_BLOCK_HAS_OVERFLOW_LINES);
 }
 nsFrameList*
 nsBlockFrame::GetOverflowOutOfFlows() const
 {
   if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS)) {
     return nullptr;
   }
   nsFrameList* result =
     GetPropTableFrames(OverflowOutOfFlowsProperty());
   NS_ASSERTION(result, "value should always be non-empty when state set");
   return result;
 }
 // This takes ownership of the frames
 void
 nsBlockFrame::SetOverflowOutOfFlows(const nsFrameList& aList,
                                     nsFrameList* aPropValue)
 {
   NS_PRECONDITION(!!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS) ==
                   !!aPropValue, "state does not match value");
   if (aList.IsEmpty()) {
     if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS)) {
       return;
     }
     nsFrameList* list = RemovePropTableFrames(OverflowOutOfFlowsProperty());
     NS_ASSERTION(aPropValue == list, "prop value mismatch");
     list->Clear();
     list->Delete(PresContext()->PresShell());
     RemoveStateBits(NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS);
   }
   else if (GetStateBits() & NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS) {
     NS_ASSERTION(aPropValue == GetPropTableFrames(OverflowOutOfFlowsProperty()),
                  "prop value mismatch");
     *aPropValue = aList;
   }
   else {
     SetPropTableFrames(new (PresContext()->PresShell()) nsFrameList(aList),
                        OverflowOutOfFlowsProperty());
     AddStateBits(NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS);
   }
 }
 nsBulletFrame*
 nsBlockFrame::GetInsideBullet() const
 {
   if (!HasInsideBullet()) {
     return nullptr;
   }
   NS_ASSERTION(!HasOutsideBullet(), "invalid bullet state");
   nsBulletFrame* frame =
     static_cast<nsBulletFrame*>(Properties().Get(InsideBulletProperty()));
   NS_ASSERTION(frame && frame->GetType() == nsGkAtoms::bulletFrame,
                "bogus inside bullet frame");
   return frame;
 }
 nsBulletFrame*
 nsBlockFrame::GetOutsideBullet() const
 {
   nsFrameList* list = GetOutsideBulletList();
   return list ? static_cast<nsBulletFrame*>(list->FirstChild())
               : nullptr;
 }
 nsFrameList*
 nsBlockFrame::GetOutsideBulletList() const
 {
   if (!HasOutsideBullet()) {
     return nullptr;
   }
   NS_ASSERTION(!HasInsideBullet(), "invalid bullet state");
   nsFrameList* list =
     static_cast<nsFrameList*>(Properties().Get(OutsideBulletProperty()));
   NS_ASSERTION(list && list->GetLength() == 1 &&
                list->FirstChild()->GetType() == nsGkAtoms::bulletFrame,
                "bogus outside bullet list");
   return list;
 }
 nsFrameList*
 nsBlockFrame::GetPushedFloats() const
 {
   if (!HasPushedFloats()) {
     return nullptr;
   }
   nsFrameList* result =
     static_cast<nsFrameList*>(Properties().Get(PushedFloatProperty()));
   NS_ASSERTION(result, "value should always be non-empty when state set");
   return result;
 }
 nsFrameList*
 nsBlockFrame::EnsurePushedFloats()
 {
   nsFrameList *result = GetPushedFloats();
   if (result)
     return result;
   result = new (PresContext()->PresShell()) nsFrameList;
   Properties().Set(PushedFloatProperty(), result);
   AddStateBits(NS_BLOCK_HAS_PUSHED_FLOATS);
   return result;
 }
 nsFrameList*
 nsBlockFrame::RemovePushedFloats()
 {
   if (!HasPushedFloats()) {
     return nullptr;
   }
   nsFrameList *result =
     static_cast<nsFrameList*>(Properties().Remove(PushedFloatProperty()));
   RemoveStateBits(NS_BLOCK_HAS_PUSHED_FLOATS);
   NS_ASSERTION(result, "value should always be non-empty when state set");
   return result;
 }
 //////////////////////////////////////////////////////////////////////
 // Frame list manipulation routines
 nsresult
 nsBlockFrame::AppendFrames(ChildListID  aListID,
                            nsFrameList& aFrameList)
 {
   if (aFrameList.IsEmpty()) {
     return NS_OK;
   }
   if (aListID != kPrincipalList) {
     if (kAbsoluteList == aListID) {
       return nsContainerFrame::AppendFrames(aListID, aFrameList);
     }
     else if (kFloatList == aListID) {
       mFloats.AppendFrames(nullptr, aFrameList);
       return NS_OK;
     }
     else {
       NS_ERROR("unexpected child list");
       return NS_ERROR_INVALID_ARG;
     }
   }
   // Find the proper last-child for where the append should go
   nsIFrame* lastKid = mFrames.LastChild();
   NS_ASSERTION((mLines.empty() ? nullptr : mLines.back()->LastChild()) ==
                lastKid, "out-of-sync mLines / mFrames");
   // Add frames after the last child
 #ifdef NOISY_REFLOW_REASON
   ListTag(stdout);
   printf(": append ");
   nsFrame::ListTag(stdout, aFrameList);
   if (lastKid) {
     printf(" after ");
     nsFrame::ListTag(stdout, lastKid);
   }
   printf("\n");
 #endif
   AddFrames(aFrameList, lastKid);
   PresContext()->PresShell()->
     FrameNeedsReflow(this, nsIPresShell::eTreeChange,
                      NS_FRAME_HAS_DIRTY_CHILDREN); // XXX sufficient?
   return NS_OK;
 }
 nsresult
 nsBlockFrame::InsertFrames(ChildListID aListID,
                            nsIFrame* aPrevFrame,
                            nsFrameList& aFrameList)
 {
   NS_ASSERTION(!aPrevFrame || aPrevFrame->GetParent() == this,
                "inserting after sibling frame with different parent");
   if (aListID != kPrincipalList) {
     if (kAbsoluteList == aListID) {
       return nsContainerFrame::InsertFrames(aListID, aPrevFrame, aFrameList);
     }
     else if (kFloatList == aListID) {
       mFloats.InsertFrames(this, aPrevFrame, aFrameList);
       return NS_OK;
     }
     else if (kNoReflowPrincipalList != aListID) {
       NS_ERROR("unexpected child list");
       return NS_ERROR_INVALID_ARG;
     }
   }
 #ifdef NOISY_REFLOW_REASON
   ListTag(stdout);
   printf(": insert ");
   nsFrame::ListTag(stdout, aFrameList);
   if (aPrevFrame) {
     printf(" after ");
     nsFrame::ListTag(stdout, aPrevFrame);
   }
   printf("\n");
 #endif
   AddFrames(aFrameList, aPrevFrame);
   if (aListID != kNoReflowPrincipalList)
     PresContext()->PresShell()->
       FrameNeedsReflow(this, nsIPresShell::eTreeChange,
                        NS_FRAME_HAS_DIRTY_CHILDREN); // XXX sufficient?
   return NS_OK;
 }
 static bool
 ShouldPutNextSiblingOnNewLine(nsIFrame* aLastFrame)
 {
   nsIAtom* type = aLastFrame->GetType();
   if (type == nsGkAtoms::brFrame) {
     return true;
   }
   // XXX the TEXT_OFFSETS_NEED_FIXING check is a wallpaper for bug 822910.
   if (type == nsGkAtoms::textFrame &&
       !(aLastFrame->GetStateBits() & TEXT_OFFSETS_NEED_FIXING)) {
     return aLastFrame->HasSignificantTerminalNewline();
   }
   return false;
 }
 void
 nsBlockFrame::AddFrames(nsFrameList& aFrameList, nsIFrame* aPrevSibling)
 {
   // Clear our line cursor, since our lines may change.
   ClearLineCursor();
   if (aFrameList.IsEmpty()) {
     return;
   }
   // If we're inserting at the beginning of our list and we have an
   // inside bullet, insert after that bullet.
   if (!aPrevSibling && HasInsideBullet()) {
     aPrevSibling = GetInsideBullet();
   }
   // Attempt to find the line that contains the previous sibling
   FrameLines* overflowLines;
   nsLineList* lineList = &mLines;
   nsLineList::iterator prevSibLine = lineList->end();
   int32_t prevSiblingIndex = -1;
   if (aPrevSibling) {
     // XXX_perf This is technically O(N^2) in some cases, but by using
     // RFind instead of Find, we make it O(N) in the most common case,
     // which is appending content.
     // Find the line that contains the previous sibling
     if (!nsLineBox::RFindLineContaining(aPrevSibling, lineList->begin(),
                                         prevSibLine, mFrames.LastChild(),
                                         &prevSiblingIndex)) {
       // Not in mLines - try overflow lines.
       overflowLines = GetOverflowLines();
       lineList = overflowLines ? &overflowLines->mLines : nullptr;
       if (overflowLines) {
         prevSibLine = overflowLines->mLines.end();
         prevSiblingIndex = -1;
         if (!nsLineBox::RFindLineContaining(aPrevSibling, lineList->begin(),
                                             prevSibLine,
                                             overflowLines->mFrames.LastChild(),
                                             &prevSiblingIndex)) {
           lineList = nullptr;
         }
       }
       if (!lineList) {
         // Note: defensive code! RFindLineContaining must not return
         // false in this case, so if it does...
         NS_NOTREACHED("prev sibling not in line list");
         lineList = &mLines;
         aPrevSibling = nullptr;
         prevSibLine = lineList->end();
       }
     }
   }
   // Find the frame following aPrevSibling so that we can join up the
   // two lists of frames.
   if (aPrevSibling) {
     // Split line containing aPrevSibling in two if the insertion
     // point is somewhere in the middle of the line.
     int32_t rem = prevSibLine->GetChildCount() - prevSiblingIndex - 1;
     if (rem) {
       // Split the line in two where the frame(s) are being inserted.
       nsLineBox* line = NewLineBox(prevSibLine, aPrevSibling->GetNextSibling(), rem);
       lineList->after_insert(prevSibLine, line);
       // Mark prevSibLine dirty and as needing textrun invalidation, since
       // we may be breaking up text in the line. Its previous line may also
       // need to be invalidated because it may be able to pull some text up.
       MarkLineDirty(prevSibLine, lineList);
       // The new line will also need its textruns recomputed because of the
       // frame changes.
       line->MarkDirty();
       line->SetInvalidateTextRuns(true);
     }
   }
   else if (! lineList->empty()) {
     lineList->front()->MarkDirty();
     lineList->front()->SetInvalidateTextRuns(true);
   }
   nsFrameList& frames = lineList == &mLines ? mFrames : overflowLines->mFrames;
   const nsFrameList::Slice& newFrames =
     frames.InsertFrames(nullptr, aPrevSibling, aFrameList);
   // Walk through the new frames being added and update the line data
   // structures to fit.
   for (nsFrameList::Enumerator e(newFrames); !e.AtEnd(); e.Next()) {
     nsIFrame* newFrame = e.get();
     NS_ASSERTION(!aPrevSibling || aPrevSibling->GetNextSibling() == newFrame,
                  "Unexpected aPrevSibling");
     NS_ASSERTION(newFrame->GetType() != nsGkAtoms::placeholderFrame ||
                  (!newFrame->IsAbsolutelyPositioned() &&
                   !newFrame->IsFloating()),
                  "Placeholders should not float or be positioned");
     bool isBlock = newFrame->IsBlockOutside();
     // If the frame is a block frame, or if there is no previous line or if the
     // previous line is a block line we need to make a new line.  We also make
     // a new line, as an optimization, in the two cases we know we'll need it:
     // if the previous line ended with a <br>, or if it has significant whitespace
     // and ended in a newline.
     if (isBlock || prevSibLine == lineList->end() || prevSibLine->IsBlock() ||
         (aPrevSibling && ShouldPutNextSiblingOnNewLine(aPrevSibling))) {
       // Create a new line for the frame and add its line to the line
       // list.
       nsLineBox* line = NewLineBox(newFrame, isBlock);
       if (prevSibLine != lineList->end()) {
         // Append new line after prevSibLine
         lineList->after_insert(prevSibLine, line);
         ++prevSibLine;
       }
       else {
         // New line is going before the other lines
         lineList->push_front(line);
         prevSibLine = lineList->begin();
       }
     }
     else {
       prevSibLine->NoteFrameAdded(newFrame);
       // We're adding inline content to prevSibLine, so we need to mark it
       // dirty, ensure its textruns are recomputed, and possibly do the same
       // to its previous line since that line may be able to pull content up.
       MarkLineDirty(prevSibLine, lineList);
     }
     aPrevSibling = newFrame;
   }
 #ifdef DEBUG
   MOZ_ASSERT(aFrameList.IsEmpty());
   VerifyLines(true);
 #endif
 }
 void
 nsBlockFrame::RemoveFloatFromFloatCache(nsIFrame* aFloat)
 {
   // Find which line contains the float, so we can update
   // the float cache.
   line_iterator line = begin_lines(), line_end = end_lines();
   for ( ; line != line_end; ++line) {
     if (line->IsInline() && line->RemoveFloat(aFloat)) {
       break;
     }
   }
 }
 void
 nsBlockFrame::RemoveFloat(nsIFrame* aFloat)
 {
 #ifdef DEBUG
   // Floats live in mFloats, or in the PushedFloat or OverflowOutOfFlows
   // frame list properties.
   if (!mFloats.ContainsFrame(aFloat)) {
     MOZ_ASSERT((GetOverflowOutOfFlows() &&
                 GetOverflowOutOfFlows()->ContainsFrame(aFloat)) ||
                (GetPushedFloats() &&
                 GetPushedFloats()->ContainsFrame(aFloat)),
                "aFloat is not our child or on an unexpected frame list");
   }
 #endif
   if (mFloats.StartRemoveFrame(aFloat)) {
     return;
   }
   nsFrameList* list = GetPushedFloats();
   if (list && list->ContinueRemoveFrame(aFloat)) {
 #if 0
     // XXXmats not yet - need to investigate nsBlockReflowState::mPushedFloats
     // first so we don't leave it pointing to a deleted list.
     if (list->IsEmpty()) {
       delete RemovePushedFloats();
     }
 #endif
     return;
   }
   {
     nsAutoOOFFrameList oofs(this);
     if (oofs.mList.ContinueRemoveFrame(aFloat)) {
       return;
     }
   }
 }
 static void MarkSameFloatManagerLinesDirty(nsBlockFrame* aBlock)
 {
   nsBlockFrame* blockWithFloatMgr = aBlock;
   while (!(blockWithFloatMgr->GetStateBits() & NS_BLOCK_FLOAT_MGR)) {
     nsBlockFrame* bf = nsLayoutUtils::GetAsBlock(blockWithFloatMgr->GetParent());
     if (!bf) {
       break;
     }
     blockWithFloatMgr = bf;
   }
   // Mark every line at and below the line where the float was
   // dirty, and mark their lines dirty too. We could probably do
   // something more efficient --- e.g., just dirty the lines that intersect
   // the float vertically.
   MarkAllDescendantLinesDirty(blockWithFloatMgr);
 }
 /**
  * Returns true if aFrame is a block that has one or more float children.
  */
 static bool BlockHasAnyFloats(nsIFrame* aFrame)
 {
   nsBlockFrame* block = nsLayoutUtils::GetAsBlock(aFrame);
   if (!block)
     return false;
   if (block->GetFirstChild(nsIFrame::kFloatList))
     return true;
   nsLineList::iterator line = block->begin_lines();
   nsLineList::iterator endLine = block->end_lines();
   while (line != endLine) {
     if (line->IsBlock() && BlockHasAnyFloats(line->mFirstChild))
       return true;
     ++line;
   }
   return false;
 }
 nsresult
 nsBlockFrame::RemoveFrame(ChildListID aListID,
                           nsIFrame* aOldFrame)
 {
   nsresult rv = NS_OK;
 #ifdef NOISY_REFLOW_REASON
   ListTag(stdout);
   printf(": remove ");
   nsFrame::ListTag(stdout, aOldFrame);
   printf("\n");
 #endif
   if (aListID == kPrincipalList) {
     bool hasFloats = BlockHasAnyFloats(aOldFrame);
     rv = DoRemoveFrame(aOldFrame, REMOVE_FIXED_CONTINUATIONS);
     if (hasFloats) {
       MarkSameFloatManagerLinesDirty(this);
     }
   }
   else if (kAbsoluteList == aListID) {
     nsContainerFrame::RemoveFrame(aListID, aOldFrame);
     return NS_OK;
   }
   else if (kFloatList == aListID) {
     // Make sure to mark affected lines dirty for the float frame
     // we are removing; this way is a bit messy, but so is the rest of the code.
     // See bug 390762.
     NS_ASSERTION(!aOldFrame->GetPrevContinuation(),
                  "RemoveFrame should not be called on pushed floats.");
     for (nsIFrame* f = aOldFrame;
          f && !(f->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER);
          f = f->GetNextContinuation()) {
       MarkSameFloatManagerLinesDirty(static_cast<nsBlockFrame*>(f->GetParent()));
     }
     DoRemoveOutOfFlowFrame(aOldFrame);
   }
   else if (kNoReflowPrincipalList == aListID) {
     // Skip the call to |FrameNeedsReflow| below by returning now.
     return DoRemoveFrame(aOldFrame, REMOVE_FIXED_CONTINUATIONS);
   }
   else {
     NS_ERROR("unexpected child list");
     rv = NS_ERROR_INVALID_ARG;
   }
   if (NS_SUCCEEDED(rv)) {
     PresContext()->PresShell()->
       FrameNeedsReflow(this, nsIPresShell::eTreeChange,
                        NS_FRAME_HAS_DIRTY_CHILDREN); // XXX sufficient?
   }
   return rv;
 }
 void
 nsBlockFrame::DoRemoveOutOfFlowFrame(nsIFrame* aFrame)
 {
   // The containing block is always the parent of aFrame.
   nsBlockFrame* block = (nsBlockFrame*)aFrame->GetParent();
   // Remove aFrame from the appropriate list.
   if (aFrame->IsAbsolutelyPositioned()) {
     // This also deletes the next-in-flows
     block->GetAbsoluteContainingBlock()->RemoveFrame(block,
                                                      kAbsoluteList,
                                                      aFrame);
   }
   else {
     // First remove aFrame's next-in-flows.
     nsIFrame* nif = aFrame->GetNextInFlow();
     if (nif) {
       static_cast<nsContainerFrame*>(nif->GetParent())
         ->DeleteNextInFlowChild(nif, false);
     }
     // Now remove aFrame from its child list and Destroy it.
     block->RemoveFloatFromFloatCache(aFrame);
     block->RemoveFloat(aFrame);
     aFrame->Destroy();
   }
 }
 /**
  * This helps us iterate over the list of all normal + overflow lines
  */
 void
 nsBlockFrame::TryAllLines(nsLineList::iterator* aIterator,
                           nsLineList::iterator* aStartIterator,
                           nsLineList::iterator* aEndIterator,
                           bool* aInOverflowLines,
                           FrameLines** aOverflowLines)
 {
   if (*aIterator == *aEndIterator) {
     if (!*aInOverflowLines) {
       // Try the overflow lines
       *aInOverflowLines = true;
       FrameLines* lines = GetOverflowLines();
       if (lines) {
         *aStartIterator = lines->mLines.begin();
         *aIterator = *aStartIterator;
         *aEndIterator = lines->mLines.end();
         *aOverflowLines = lines;
       }
     }
   }
 }
 nsBlockInFlowLineIterator::nsBlockInFlowLineIterator(nsBlockFrame* aFrame,
     line_iterator aLine)
   : mFrame(aFrame), mLine(aLine), mLineList(&aFrame->mLines)
 {
   // This will assert if aLine isn't in mLines of aFrame:
   DebugOnly<bool> check = aLine == mFrame->begin_lines();
 }
 nsBlockInFlowLineIterator::nsBlockInFlowLineIterator(nsBlockFrame* aFrame,
     line_iterator aLine, bool aInOverflow)
   : mFrame(aFrame), mLine(aLine),
     mLineList(aInOverflow ? &aFrame->GetOverflowLines()->mLines
                           : &aFrame->mLines)
 {
 }
 nsBlockInFlowLineIterator::nsBlockInFlowLineIterator(nsBlockFrame* aFrame,
     bool* aFoundValidLine)
   : mFrame(aFrame), mLineList(&aFrame->mLines)
 {
   mLine = aFrame->begin_lines();
   *aFoundValidLine = FindValidLine();
 }
 static nsIFrame*
 FindChildContaining(nsBlockFrame* aFrame, nsIFrame* aFindFrame)
 {
   NS_ASSERTION(aFrame, "must have frame");
   nsIFrame* child;
   while (true) {
     nsIFrame* block = aFrame;
     do {
       child = nsLayoutUtils::FindChildContainingDescendant(block, aFindFrame);
       if (child)
         break;
       block = block->GetNextContinuation();
     } while (block);
     if (!child)
       return nullptr;
     if (!(child->GetStateBits() & NS_FRAME_OUT_OF_FLOW))
       break;
     aFindFrame = aFrame->PresContext()->FrameManager()->GetPlaceholderFrameFor(child);
   }
   return child;
 }
 nsBlockInFlowLineIterator::nsBlockInFlowLineIterator(nsBlockFrame* aFrame,
     nsIFrame* aFindFrame, bool* aFoundValidLine)
   : mFrame(aFrame), mLineList(&aFrame->mLines)
 {
   *aFoundValidLine = false;
   nsIFrame* child = FindChildContaining(aFrame, aFindFrame);
   if (!child)
     return;
   // Try to use the cursor if it exists, otherwise fall back to the first line
   nsLineBox* cursor = aFrame->GetLineCursor();
   if (!cursor) {
     line_iterator iter = aFrame->begin_lines();
     if (iter != aFrame->end_lines()) {
       cursor = iter;
     }
   }
   if (cursor) {
     // Perform a simultaneous forward and reverse search starting from the
     // line cursor.
     nsBlockFrame::line_iterator line = aFrame->line(cursor);
     nsBlockFrame::reverse_line_iterator rline = aFrame->rline(cursor);
     nsBlockFrame::line_iterator line_end = aFrame->end_lines();
     nsBlockFrame::reverse_line_iterator rline_end = aFrame->rend_lines();
     // rline is positioned on the line containing 'cursor', so it's not
     // rline_end. So we can safely increment it (i.e. move it to one line
     // earlier) to start searching there.
     ++rline;
     while (line != line_end || rline != rline_end) {
       if (line != line_end) {
         if (line->Contains(child)) {
           *aFoundValidLine = true;
           mLine = line;
           return;
         }
         ++line;
       }
       if (rline != rline_end) {
         if (rline->Contains(child)) {
           *aFoundValidLine = true;
           mLine = rline;
           return;
         }
         ++rline;
       }
     }
     // Didn't find the line
   }
   // If we reach here, it means that we have not been able to find the
   // desired frame in our in-flow lines.  So we should start looking at
   // our overflow lines. In order to do that, we set mLine to the end
   // iterator so that FindValidLine starts to look at overflow lines,
   // if any.
   mLine = aFrame->end_lines();
   if (!FindValidLine())
     return;
   do {
     if (mLine->Contains(child)) {
       *aFoundValidLine = true;
       return;
     }
   } while (Next());
 }
 nsBlockFrame::line_iterator
 nsBlockInFlowLineIterator::End()
 {
   return mLineList->end();
 }
 bool
 nsBlockInFlowLineIterator::IsLastLineInList()
 {
   line_iterator end = End();
   return mLine != end && mLine.next() == end;
 }
 bool
 nsBlockInFlowLineIterator::Next()
 {
   ++mLine;
   return FindValidLine();
 }
 bool
 nsBlockInFlowLineIterator::Prev()
 {
   line_iterator begin = mLineList->begin();
   if (mLine != begin) {
     --mLine;
     return true;
   }
   bool currentlyInOverflowLines = GetInOverflow();
   while (true) {
     if (currentlyInOverflowLines) {
       mLineList = &mFrame->mLines;
       mLine = mLineList->end();
       if (mLine != mLineList->begin()) {
         --mLine;
         return true;
       }
     } else {
       mFrame = static_cast<nsBlockFrame*>(mFrame->GetPrevInFlow());
       if (!mFrame)
         return false;
       nsBlockFrame::FrameLines* overflowLines = mFrame->GetOverflowLines();
       if (overflowLines) {
         mLineList = &overflowLines->mLines;
         mLine = mLineList->end();
         NS_ASSERTION(mLine != mLineList->begin(), "empty overflow line list?");
         --mLine;
         return true;
       }
     }
     currentlyInOverflowLines = !currentlyInOverflowLines;
   }
 }
 bool
 nsBlockInFlowLineIterator::FindValidLine()
 {
   line_iterator end = mLineList->end();
   if (mLine != end)
     return true;
   bool currentlyInOverflowLines = GetInOverflow();
   while (true) {
     if (currentlyInOverflowLines) {
       mFrame = static_cast<nsBlockFrame*>(mFrame->GetNextInFlow());
       if (!mFrame)
         return false;
       mLineList = &mFrame->mLines;
       mLine = mLineList->begin();
       if (mLine != mLineList->end())
         return true;
     } else {
       nsBlockFrame::FrameLines* overflowLines = mFrame->GetOverflowLines();
       if (overflowLines) {
         mLineList = &overflowLines->mLines;
         mLine = mLineList->begin();
         NS_ASSERTION(mLine != mLineList->end(), "empty overflow line list?");
         return true;
       }
     }
     currentlyInOverflowLines = !currentlyInOverflowLines;
   }
 }
 static nsresult RemoveBlockChild(nsIFrame* aFrame,
                                  bool      aRemoveOnlyFluidContinuations)
 {
   if (!aFrame)
     return NS_OK;
   nsBlockFrame* nextBlock = nsLayoutUtils::GetAsBlock(aFrame->GetParent());
   NS_ASSERTION(nextBlock,
                "Our child's continuation's parent is not a block?");
   return nextBlock->DoRemoveFrame(aFrame,
       (aRemoveOnlyFluidContinuations ? 0 : nsBlockFrame::REMOVE_FIXED_CONTINUATIONS));
 }
 // This function removes aDeletedFrame and all its continuations.  It
 // is optimized for deleting a whole series of frames. The easy
 // implementation would invoke itself recursively on
 // aDeletedFrame->GetNextContinuation, then locate the line containing
 // aDeletedFrame and remove aDeletedFrame from that line. But here we
 // start by locating aDeletedFrame and then scanning from that point
 // on looking for continuations.
 nsresult
 nsBlockFrame::DoRemoveFrame(nsIFrame* aDeletedFrame, uint32_t aFlags)
 {
   // Clear our line cursor, since our lines may change.
   ClearLineCursor();
   if (aDeletedFrame->GetStateBits() &
       (NS_FRAME_OUT_OF_FLOW | NS_FRAME_IS_OVERFLOW_CONTAINER)) {
     if (!aDeletedFrame->GetPrevInFlow()) {
       NS_ASSERTION(aDeletedFrame->GetStateBits() & NS_FRAME_OUT_OF_FLOW,
                    "Expected out-of-flow frame");
       DoRemoveOutOfFlowFrame(aDeletedFrame);
     }
     else {
       nsContainerFrame::DeleteNextInFlowChild(aDeletedFrame,
                                               (aFlags & FRAMES_ARE_EMPTY) != 0);
     }
     return NS_OK;
   }
   // Find the line that contains deletedFrame
   nsLineList::iterator line_start = mLines.begin(),
                        line_end = mLines.end();
   nsLineList::iterator line = line_start;
   FrameLines* overflowLines = nullptr;
   bool searchingOverflowList = false;
   // Make sure we look in the overflow lines even if the normal line
   // list is empty
   TryAllLines(&line, &line_start, &line_end, &searchingOverflowList,
               &overflowLines);
   while (line != line_end) {
     if (line->Contains(aDeletedFrame)) {
       break;
     }
     ++line;
     TryAllLines(&line, &line_start, &line_end, &searchingOverflowList,
                 &overflowLines);
   }
   if (line == line_end) {
     NS_ERROR("can't find deleted frame in lines");
     return NS_ERROR_FAILURE;
   }
   if (!(aFlags & FRAMES_ARE_EMPTY)) {
     if (line != line_start) {
       line.prev()->MarkDirty();
       line.prev()->SetInvalidateTextRuns(true);
     }
     else if (searchingOverflowList && !mLines.empty()) {
       mLines.back()->MarkDirty();
       mLines.back()->SetInvalidateTextRuns(true);
     }
   }
   while (line != line_end && aDeletedFrame) {
     NS_ASSERTION(this == aDeletedFrame->GetParent(), "messed up delete code");
     NS_ASSERTION(line->Contains(aDeletedFrame), "frame not in line");
     if (!(aFlags & FRAMES_ARE_EMPTY)) {
       line->MarkDirty();
       line->SetInvalidateTextRuns(true);
     }
     // If the frame being deleted is the last one on the line then
     // optimize away the line->Contains(next-in-flow) call below.
     bool isLastFrameOnLine = 1 == line->GetChildCount();
     if (!isLastFrameOnLine) {
       line_iterator next = line.next();
       nsIFrame* lastFrame = next != line_end ?
         next->mFirstChild->GetPrevSibling() :
         (searchingOverflowList ? overflowLines->mFrames.LastChild() :
                                  mFrames.LastChild());
       NS_ASSERTION(next == line_end || lastFrame == line->LastChild(),
                    "unexpected line frames");
       isLastFrameOnLine = lastFrame == aDeletedFrame;
     }
     // Remove aDeletedFrame from the line
     if (line->mFirstChild == aDeletedFrame) {
       // We should be setting this to null if aDeletedFrame
       // is the only frame on the line. HOWEVER in that case
       // we will be removing the line anyway, see below.
       line->mFirstChild = aDeletedFrame->GetNextSibling();
     }
     // Hmm, this won't do anything if we're removing a frame in the first
     // overflow line... Hopefully doesn't matter
     --line;
     if (line != line_end && !line->IsBlock()) {
       // Since we just removed a frame that follows some inline
       // frames, we need to reflow the previous line.
       line->MarkDirty();
     }
     ++line;
     // Take aDeletedFrame out of the sibling list. Note that
     // prevSibling will only be nullptr when we are deleting the very
     // first frame in the main or overflow list.
     if (searchingOverflowList) {
       overflowLines->mFrames.RemoveFrame(aDeletedFrame);
     } else {
       mFrames.RemoveFrame(aDeletedFrame);
     }
     // Update the child count of the line to be accurate
     line->NoteFrameRemoved(aDeletedFrame);
     // Destroy frame; capture its next continuation first in case we need
     // to destroy that too.
     nsIFrame* deletedNextContinuation = (aFlags & REMOVE_FIXED_CONTINUATIONS) ?
         aDeletedFrame->GetNextContinuation() : aDeletedFrame->GetNextInFlow();
 #ifdef NOISY_REMOVE_FRAME
     printf("DoRemoveFrame: %s line=%p frame=",
            searchingOverflowList?"overflow":"normal", line.get());
     nsFrame::ListTag(stdout, aDeletedFrame);
     printf(" prevSibling=%p deletedNextContinuation=%p\n",
            aDeletedFrame->GetPrevSibling(), deletedNextContinuation);
 #endif
     // If next-in-flow is an overflow container, must remove it first.
     if (deletedNextContinuation &&
         deletedNextContinuation->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER) {
       static_cast<nsContainerFrame*>(deletedNextContinuation->GetParent())
         ->DeleteNextInFlowChild(deletedNextContinuation, false);
       deletedNextContinuation = nullptr;
     }
     aDeletedFrame->Destroy();
     aDeletedFrame = deletedNextContinuation;
     bool haveAdvancedToNextLine = false;
     // If line is empty, remove it now.
     if (0 == line->GetChildCount()) {
 #ifdef NOISY_REMOVE_FRAME
         printf("DoRemoveFrame: %s line=%p became empty so it will be removed\n",
                searchingOverflowList?"overflow":"normal", line.get());
 #endif
       nsLineBox *cur = line;
       if (!searchingOverflowList) {
         line = mLines.erase(line);
         // Invalidate the space taken up by the line.
         // XXX We need to do this if we're removing a frame as a result of
         // a call to RemoveFrame(), but we may not need to do this in all
         // cases...
 #ifdef NOISY_BLOCK_INVALIDATE
         nsRect visOverflow(cur->GetVisualOverflowArea());
         printf("%p invalidate 10 (%d, %d, %d, %d)\n",
                this, visOverflow.x, visOverflow.y,
                visOverflow.width, visOverflow.height);
 #endif
       } else {
         line = overflowLines->mLines.erase(line);
         if (overflowLines->mLines.empty()) {
           DestroyOverflowLines();
           overflowLines = nullptr;
           // We just invalidated our iterators.  Since we were in
           // the overflow lines list, which is now empty, set them
           // so we're at the end of the regular line list.
           line_start = mLines.begin();
           line_end = mLines.end();
           line = line_end;
         }
       }
       FreeLineBox(cur);
       // If we're removing a line, ReflowDirtyLines isn't going to
       // know that it needs to slide lines unless something is marked
       // dirty.  So mark the previous margin of the next line dirty if
       // there is one.
       if (line != line_end) {
         line->MarkPreviousMarginDirty();
       }
       haveAdvancedToNextLine = true;
     } else {
       // Make the line that just lost a frame dirty, and advance to
       // the next line.
       if (!deletedNextContinuation || isLastFrameOnLine ||
           !line->Contains(deletedNextContinuation)) {
         line->MarkDirty();
         ++line;
         haveAdvancedToNextLine = true;
       }
     }
     if (deletedNextContinuation) {
       // See if we should keep looking in the current flow's line list.
       if (deletedNextContinuation->GetParent() != this) {
         // The deceased frames continuation is not a child of the
         // current block. So break out of the loop so that we advance
         // to the next parent.
         //
         // If we have a continuation in a different block then all bets are
         // off regarding whether we are deleting frames without actual content,
         // so don't propagate FRAMES_ARE_EMPTY any further.
         aFlags &= ~FRAMES_ARE_EMPTY;
         break;
       }
       // If we advanced to the next line then check if we should switch to the
       // overflow line list.
       if (haveAdvancedToNextLine) {
         if (line != line_end && !searchingOverflowList &&
             !line->Contains(deletedNextContinuation)) {
           // We have advanced to the next *normal* line but the next-in-flow
           // is not there - force a switch to the overflow line list.
           line = line_end;
         }
         TryAllLines(&line, &line_start, &line_end, &searchingOverflowList,
                     &overflowLines);
 #ifdef NOISY_REMOVE_FRAME
         printf("DoRemoveFrame: now on %s line=%p\n",
                searchingOverflowList?"overflow":"normal", line.get());
 #endif
       }
     }
   }
   if (!(aFlags & FRAMES_ARE_EMPTY) && line.next() != line_end) {
     line.next()->MarkDirty();
     line.next()->SetInvalidateTextRuns(true);
   }
 #ifdef DEBUG
   VerifyLines(true);
   VerifyOverflowSituation();
 #endif
   // Advance to next flow block if the frame has more continuations
   return RemoveBlockChild(aDeletedFrame, !(aFlags & REMOVE_FIXED_CONTINUATIONS));
 }
 static bool
 FindBlockLineFor(nsIFrame*             aChild,
                  nsLineList::iterator  aBegin,
                  nsLineList::iterator  aEnd,
                  nsLineList::iterator* aResult)
 {
   MOZ_ASSERT(aChild->IsBlockOutside());
   for (nsLineList::iterator line = aBegin; line != aEnd; ++line) {
     MOZ_ASSERT(line->GetChildCount() > 0);
     if (line->IsBlock() && line->mFirstChild == aChild) {
       MOZ_ASSERT(line->GetChildCount() == 1);
       *aResult = line;
       return true;
     }
   }
   return false;
 }
 static bool
 FindInlineLineFor(nsIFrame*             aChild,
                   const nsFrameList&    aFrameList,
                   nsLineList::iterator  aBegin,
                   nsLineList::iterator  aEnd,
                   nsLineList::iterator* aResult)
 {
   MOZ_ASSERT(!aChild->IsBlockOutside());
   for (nsLineList::iterator line = aBegin; line != aEnd; ++line) {
     MOZ_ASSERT(line->GetChildCount() > 0);
     if (!line->IsBlock()) {
       // Optimize by comparing the line's last child first.
       nsLineList::iterator next = line.next();
       if (aChild == (next == aEnd ? aFrameList.LastChild()
                                   : next->mFirstChild->GetPrevSibling()) ||
           line->Contains(aChild)) {
         *aResult = line;
         return true;
       }
     }
   }
   return false;
 }
 static bool
 FindLineFor(nsIFrame*             aChild,
             const nsFrameList&    aFrameList,
             nsLineList::iterator  aBegin,
             nsLineList::iterator  aEnd,
             nsLineList::iterator* aResult)
 {
   return aChild->IsBlockOutside() ?
     FindBlockLineFor(aChild, aBegin, aEnd, aResult) :
     FindInlineLineFor(aChild, aFrameList, aBegin, aEnd, aResult);
 }
 nsresult
 nsBlockFrame::StealFrame(nsIFrame* aChild,
                          bool      aForceNormal)
 {
   MOZ_ASSERT(aChild->GetParent() == this);
   if ((aChild->GetStateBits() & NS_FRAME_OUT_OF_FLOW) &&
       aChild->IsFloating()) {
     RemoveFloat(aChild);
     return NS_OK;
   }
   if ((aChild->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)
       && !aForceNormal) {
     return nsContainerFrame::StealFrame(aChild);
   }
   MOZ_ASSERT(!(aChild->GetStateBits() & NS_FRAME_OUT_OF_FLOW));
   nsLineList::iterator line;
   if (FindLineFor(aChild, mFrames, mLines.begin(), mLines.end(), &line)) {
     RemoveFrameFromLine(aChild, line, mFrames, mLines);
   } else {
     FrameLines* overflowLines = GetOverflowLines();
     DebugOnly<bool> found;
     found = FindLineFor(aChild, overflowLines->mFrames,
                         overflowLines->mLines.begin(),
                         overflowLines->mLines.end(), &line);
     MOZ_ASSERT(found);
     RemoveFrameFromLine(aChild, line, overflowLines->mFrames,
                         overflowLines->mLines);
     if (overflowLines->mLines.empty()) {
       DestroyOverflowLines();
     }
   }
   return NS_OK;
 }
 void
 nsBlockFrame::RemoveFrameFromLine(nsIFrame* aChild, nsLineList::iterator aLine,
                                   nsFrameList& aFrameList, nsLineList& aLineList)
 {
   aFrameList.RemoveFrame(aChild);
   if (aChild == aLine->mFirstChild) {
     aLine->mFirstChild = aChild->GetNextSibling();
   }
   aLine->NoteFrameRemoved(aChild);
   if (aLine->GetChildCount() > 0) {
     aLine->MarkDirty();
   } else {
     // The line became empty - destroy it.
     nsLineBox* lineBox = aLine;
     aLine = aLineList.erase(aLine);
     if (aLine != aLineList.end()) {
       aLine->MarkPreviousMarginDirty();
     }
     FreeLineBox(lineBox);
   }
 }
 void
 nsBlockFrame::DeleteNextInFlowChild(nsIFrame* aNextInFlow,
                                     bool      aDeletingEmptyFrames)
 {
   NS_PRECONDITION(aNextInFlow->GetPrevInFlow(), "bad next-in-flow");
   if (aNextInFlow->GetStateBits() &
       (NS_FRAME_OUT_OF_FLOW | NS_FRAME_IS_OVERFLOW_CONTAINER)) {
     nsContainerFrame::DeleteNextInFlowChild(aNextInFlow, aDeletingEmptyFrames);
   }
   else {
 #ifdef DEBUG
     if (aDeletingEmptyFrames) {
       nsLayoutUtils::AssertTreeOnlyEmptyNextInFlows(aNextInFlow);
     }
 #endif
     DoRemoveFrame(aNextInFlow,
         aDeletingEmptyFrames ? FRAMES_ARE_EMPTY : 0);
   }
 }
 const nsStyleText*
 nsBlockFrame::StyleTextForLineLayout()
 {
   // Return the pointer to an unmodified style text
   return StyleText();
 }
 ////////////////////////////////////////////////////////////////////////
 // Float support
 nsRect
 nsBlockFrame::AdjustFloatAvailableSpace(nsBlockReflowState& aState,
                                         const nsRect& aFloatAvailableSpace,
                                         nsIFrame* aFloatFrame)
 {
   // Compute the available width. By default, assume the width of the
   // containing block.
   nscoord availWidth;
   const nsStyleDisplay* floatDisplay = aFloatFrame->StyleDisplay();
   if (NS_STYLE_DISPLAY_TABLE != floatDisplay->mDisplay ||
       eCompatibility_NavQuirks != aState.mPresContext->CompatibilityMode() ) {
     availWidth = aState.mContentArea.width;
   }
   else {
     // This quirk matches the one in nsBlockReflowState::FlowAndPlaceFloat
     // give tables only the available space
     // if they can shrink we may not be constrained to place
     // them in the next line
     availWidth = aFloatAvailableSpace.width;
   }
   nscoord availHeight = NS_UNCONSTRAINEDSIZE == aState.mContentArea.height
                         ? NS_UNCONSTRAINEDSIZE
                         : std::max(0, aState.mContentArea.YMost() - aState.mY);
 #ifdef DISABLE_FLOAT_BREAKING_IN_COLUMNS
   if (availHeight != NS_UNCONSTRAINEDSIZE &&
       nsLayoutUtils::GetClosestFrameOfType(this, nsGkAtoms::columnSetFrame)) {
     // Tell the float it has unrestricted height, so it won't break.
     // If the float doesn't actually fit in the column it will fail to be
     // placed, and either move to the top of the next column or just
     // overflow.
     availHeight = NS_UNCONSTRAINEDSIZE;
   }
 #endif
   return nsRect(aState.mContentArea.x,
                 aState.mContentArea.y,
                 availWidth, availHeight);
 }
 nscoord
 nsBlockFrame::ComputeFloatWidth(nsBlockReflowState& aState,
                                 const nsRect&       aFloatAvailableSpace,
                                 nsIFrame*           aFloat)
 {
   NS_PRECONDITION(aFloat->GetStateBits() & NS_FRAME_OUT_OF_FLOW,
                   "aFloat must be an out-of-flow frame");
   // Reflow the float.
   nsRect availSpace = AdjustFloatAvailableSpace(aState, aFloatAvailableSpace,
                                                 aFloat);
   nsHTMLReflowState floatRS(aState.mPresContext, aState.mReflowState, aFloat,
                             availSpace.Size());
   return floatRS.ComputedWidth() + floatRS.ComputedPhysicalBorderPadding().LeftRight() +
     floatRS.ComputedPhysicalMargin().LeftRight();
 }
 nsresult
 nsBlockFrame::ReflowFloat(nsBlockReflowState& aState,
                           const nsRect&       aAdjustedAvailableSpace,
                           nsIFrame*           aFloat,
                           nsMargin&           aFloatMargin,
                           nsMargin&           aFloatOffsets,
                           bool                aFloatPushedDown,
                           nsReflowStatus&     aReflowStatus)
 {
   NS_PRECONDITION(aFloat->GetStateBits() & NS_FRAME_OUT_OF_FLOW,
                   "aFloat must be an out-of-flow frame");
   // Reflow the float.
   aReflowStatus = NS_FRAME_COMPLETE;
 #ifdef NOISY_FLOAT
   printf("Reflow Float %p in parent %p, availSpace(%d,%d,%d,%d)\n",
           aFloat, this,
           aFloatAvailableSpace.x, aFloatAvailableSpace.y,
           aFloatAvailableSpace.width, aFloatAvailableSpace.height
   );
 #endif
   nsHTMLReflowState floatRS(aState.mPresContext, aState.mReflowState, aFloat,
                             nsSize(aAdjustedAvailableSpace.width,
                                    aAdjustedAvailableSpace.height));
   // Normally the mIsTopOfPage state is copied from the parent reflow
   // state.  However, when reflowing a float, if we've placed other
   // floats that force this float *down* or *narrower*, we should unset
   // the mIsTopOfPage state.
   // FIXME: This is somewhat redundant with the |isAdjacentWithTop|
   // variable below, which has the exact same effect.  Perhaps it should
   // be merged into that, except that the test for narrowing here is not
   // about adjacency with the top, so it seems misleading.
   if (floatRS.mFlags.mIsTopOfPage &&
       (aFloatPushedDown ||
        aAdjustedAvailableSpace.width != aState.mContentArea.width)) {
     floatRS.mFlags.mIsTopOfPage = false;
   }
   // Setup a block reflow context to reflow the float.
   nsBlockReflowContext brc(aState.mPresContext, aState.mReflowState);
   // Reflow the float
   bool isAdjacentWithTop = aState.IsAdjacentWithTop();
   nsIFrame* clearanceFrame = nullptr;
   nsresult rv;
   do {
     nsCollapsingMargin margin;
     bool mayNeedRetry = false;
     floatRS.mDiscoveredClearance = nullptr;
     // Only first in flow gets a top margin.
     if (!aFloat->GetPrevInFlow()) {
       nsBlockReflowContext::ComputeCollapsedTopMargin(floatRS, &margin,
                                                       clearanceFrame, &mayNeedRetry);
       if (mayNeedRetry && !clearanceFrame) {
         floatRS.mDiscoveredClearance = &clearanceFrame;
         // We don't need to push the float manager state because the the block has its own
         // float manager that will be destroyed and recreated
       }
     }
     rv = brc.ReflowBlock(aAdjustedAvailableSpace, true, margin,
 , isAdjacentWithTop,
                          nullptr, floatRS,
                          aReflowStatus, aState);
   } while (NS_SUCCEEDED(rv) && clearanceFrame);
   if (!NS_FRAME_IS_FULLY_COMPLETE(aReflowStatus) &&
       ShouldAvoidBreakInside(floatRS)) {
     aReflowStatus = NS_INLINE_LINE_BREAK_BEFORE();
   } else if (NS_FRAME_IS_NOT_COMPLETE(aReflowStatus) &&
              (NS_UNCONSTRAINEDSIZE == aAdjustedAvailableSpace.height)) {
     // An incomplete reflow status means we should split the float
     // if the height is constrained (bug 145305).
     aReflowStatus = NS_FRAME_COMPLETE;
   }
   if (aReflowStatus & NS_FRAME_REFLOW_NEXTINFLOW) {
     aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
   }
   if (aFloat->GetType() == nsGkAtoms::letterFrame) {
     // We never split floating first letters; an incomplete state for
     // such frames simply means that there is more content to be
     // reflowed on the line.
     if (NS_FRAME_IS_NOT_COMPLETE(aReflowStatus))
       aReflowStatus = NS_FRAME_COMPLETE;
   }
   if (NS_FAILED(rv)) {
     return rv;
   }
   // Capture the margin and offsets information for the caller
   aFloatMargin = floatRS.ComputedPhysicalMargin(); // float margins don't collapse
   aFloatOffsets = floatRS.ComputedPhysicalOffsets();
   const nsHTMLReflowMetrics& metrics = brc.GetMetrics();
   // Set the rect, make sure the view is properly sized and positioned,
   // and tell the frame we're done reflowing it
   // XXXldb This seems like the wrong place to be doing this -- shouldn't
   // we be doing this in nsBlockReflowState::FlowAndPlaceFloat after
   // we've positioned the float, and shouldn't we be doing the equivalent
   // of |PlaceFrameView| here?
   aFloat->SetSize(nsSize(metrics.Width(), metrics.Height()));
   if (aFloat->HasView()) {
     nsContainerFrame::SyncFrameViewAfterReflow(aState.mPresContext, aFloat,
                                                aFloat->GetView(),
                                                metrics.VisualOverflow(),
                                                NS_FRAME_NO_MOVE_VIEW);
   }
   // Pass floatRS so the frame hierarchy can be used (redoFloatRS has the same hierarchy)
   aFloat->DidReflow(aState.mPresContext, &floatRS,
                     nsDidReflowStatus::FINISHED);
 #ifdef NOISY_FLOAT
   printf("end ReflowFloat %p, sized to %d,%d\n",
          aFloat, metrics.Width(), metrics.Height());
 #endif
   return NS_OK;
 }
 uint8_t
 nsBlockFrame::FindTrailingClear()
 {
   // find the break type of the last line
   for (nsIFrame* b = this; b; b = b->GetPrevInFlow()) {
     nsBlockFrame* block = static_cast<nsBlockFrame*>(b);
     line_iterator endLine = block->end_lines();
     if (endLine != block->begin_lines()) {
       --endLine;
       return endLine->GetBreakTypeAfter();
     }
   }
   return NS_STYLE_CLEAR_NONE;
 }
 void
 nsBlockFrame::ReflowPushedFloats(nsBlockReflowState& aState,
                                  nsOverflowAreas&    aOverflowAreas,
                                  nsReflowStatus&     aStatus)
 {
   // Pushed floats live at the start of our float list; see comment
   // above nsBlockFrame::DrainPushedFloats.
   for (nsIFrame* f = mFloats.FirstChild(), *next;
        f && (f->GetStateBits() & NS_FRAME_IS_PUSHED_FLOAT);
        f = next) {
     // save next sibling now, since reflowing could push the entire
     // float, changing its siblings
     next = f->GetNextSibling();
     // When we push a first-continuation float in a non-initial reflow,
     // it's possible that we end up with two continuations with the same
     // parent.  This happens if, on the previous reflow of the block or
     // a previous reflow of the line containing the block, the float was
     // split between continuations A and B of the parent, but on the
     // current reflow, none of the float can fit in A.
     //
     // When this happens, we might even have the two continuations
     // out-of-order due to the management of the pushed floats.  In
     // particular, if the float's placeholder was in a pushed line that
     // we reflowed before it was pushed, and we split the float during
     // that reflow, we might have the continuation of the float before
     // the float itself.  (In the general case, however, it's correct
     // for floats in the pushed floats list to come before floats
     // anchored in pushed lines; however, in this case it's wrong.  We
     // should probably find a way to fix it somehow, since it leads to
     // incorrect layout in some cases.)
     //
     // When we have these out-of-order continuations, we might hit the
     // next-continuation before the previous-continuation.  When that
     // happens, just push it.  When we reflow the next continuation,
     // we'll either pull all of its content back and destroy it (by
     // calling DeleteNextInFlowChild), or nsBlockFrame::SplitFloat will
     // pull it out of its current position and push it again (and
     // potentially repeat this cycle for the next continuation, although
     // hopefully then they'll be in the right order).
     //
     // We should also need this code for the in-order case if the first
     // continuation of a float gets moved across more than one
     // continuation of the containing block.  In this case we'd manage
     // to push the second continuation without this check, but not the
     // third and later.
     nsIFrame *prevContinuation = f->GetPrevContinuation();
     if (prevContinuation && prevContinuation->GetParent() == f->GetParent()) {
       mFloats.RemoveFrame(f);
       aState.AppendPushedFloat(f);
       continue;
     }
     // Always call FlowAndPlaceFloat; we might need to place this float
     // if didn't belong to this block the last time it was reflowed.
     aState.FlowAndPlaceFloat(f);
     ConsiderChildOverflow(aOverflowAreas, f);
   }
   // If there are continued floats, then we may need to continue BR clearance
   if (0 != aState.ClearFloats(0, NS_STYLE_CLEAR_BOTH)) {
     aState.mFloatBreakType = static_cast<nsBlockFrame*>(GetPrevInFlow())
                                ->FindTrailingClear();
   }
 }
 void
 nsBlockFrame::RecoverFloats(nsFloatManager& aFloatManager)
 {
   // Recover our own floats
   nsIFrame* stop = nullptr; // Stop before we reach pushed floats that
                            // belong to our next-in-flow
   for (nsIFrame* f = mFloats.FirstChild(); f && f != stop; f = f->GetNextSibling()) {
     nsRect region = nsFloatManager::GetRegionFor(f);
     aFloatManager.AddFloat(f, region);
     if (!stop && f->GetNextInFlow())
       stop = f->GetNextInFlow();
   }
   // Recurse into our overflow container children
   for (nsIFrame* oc = GetFirstChild(kOverflowContainersList);
        oc; oc = oc->GetNextSibling()) {
     RecoverFloatsFor(oc, aFloatManager);
   }
   // Recurse into our normal children
   for (nsBlockFrame::line_iterator line = begin_lines(); line != end_lines(); ++line) {
     if (line->IsBlock()) {
       RecoverFloatsFor(line->mFirstChild, aFloatManager);
     }
   }
 }
 void
 nsBlockFrame::RecoverFloatsFor(nsIFrame*       aFrame,
                                nsFloatManager& aFloatManager)
 {
   NS_PRECONDITION(aFrame, "null frame");
   // Only blocks have floats
   nsBlockFrame* block = nsLayoutUtils::GetAsBlock(aFrame);
   // Don't recover any state inside a block that has its own space manager
   // (we don't currently have any blocks like this, though, thanks to our
   // use of extra frames for 'overflow')
   if (block && !nsBlockFrame::BlockNeedsFloatManager(block)) {
     // If the element is relatively positioned, then adjust x and y
     // accordingly so that we consider relatively positioned frames
     // at their original position.
     nsPoint pos = block->GetNormalPosition();
     aFloatManager.Translate(pos.x, pos.y);
     block->RecoverFloats(aFloatManager);
     aFloatManager.Translate(-pos.x, -pos.y);
   }
 }
 //////////////////////////////////////////////////////////////////////
 // Painting, event handling
 #ifdef DEBUG
 static void ComputeVisualOverflowArea(nsLineList& aLines,
                                       nscoord aWidth, nscoord aHeight,
                                       nsRect& aResult)
 {
   nscoord xa = 0, ya = 0, xb = aWidth, yb = aHeight;
   for (nsLineList::iterator line = aLines.begin(), line_end = aLines.end();
        line != line_end;
        ++line) {
     // Compute min and max x/y values for the reflowed frame's
     // combined areas
     nsRect visOverflow(line->GetVisualOverflowArea());
     nscoord x = visOverflow.x;
     nscoord y = visOverflow.y;
     nscoord xmost = x + visOverflow.width;
     nscoord ymost = y + visOverflow.height;
     if (x < xa) {
       xa = x;
     }
     if (xmost > xb) {
       xb = xmost;
     }
     if (y < ya) {
       ya = y;
     }
     if (ymost > yb) {
       yb = ymost;
     }
   }
   aResult.x = xa;
   aResult.y = ya;
   aResult.width = xb - xa;
   aResult.height = yb - ya;
 }
 #endif
 bool
 nsBlockFrame::IsVisibleInSelection(nsISelection* aSelection)
 {
   if (mContent->IsHTML() && (mContent->Tag() == nsGkAtoms::html ||
                              mContent->Tag() == nsGkAtoms::body))
     return true;
   nsCOMPtr<nsIDOMNode> node(do_QueryInterface(mContent));
   bool visible;
   nsresult rv = aSelection->ContainsNode(node, true, &visible);
   return NS_SUCCEEDED(rv) && visible;
 }
 #ifdef DEBUG
 static void DebugOutputDrawLine(int32_t aDepth, nsLineBox* aLine, bool aDrawn) {
   if (nsBlockFrame::gNoisyDamageRepair) {
     nsFrame::IndentBy(stdout, aDepth+1);
     nsRect lineArea = aLine->GetVisualOverflowArea();
     printf("%s line=%p bounds=%d,%d,%d,%d ca=%d,%d,%d,%d\n",
            aDrawn ? "draw" : "skip",
            static_cast<void*>(aLine),
            aLine->IStart(), aLine->BStart(),
            aLine->ISize(), aLine->BSize(),
            lineArea.x, lineArea.y,
            lineArea.width, lineArea.height);
   }
 }
 #endif
 static void
 DisplayLine(nsDisplayListBuilder* aBuilder, const nsRect& aLineArea,
             const nsRect& aDirtyRect, nsBlockFrame::line_iterator& aLine,
             int32_t aDepth, int32_t& aDrawnLines, const nsDisplayListSet& aLists,
             nsBlockFrame* aFrame, TextOverflow* aTextOverflow) {
   // If the line's combined area (which includes child frames that
   // stick outside of the line's bounding box or our bounding box)
   // intersects the dirty rect then paint the line.
   bool intersect = aLineArea.Intersects(aDirtyRect);
 #ifdef DEBUG
   if (nsBlockFrame::gLamePaintMetrics) {
     aDrawnLines++;
   }
   DebugOutputDrawLine(aDepth, aLine.get(), intersect);
 #endif
   // The line might contain a placeholder for a visible out-of-flow, in which
   // case we need to descend into it. If there is such a placeholder, we will
   // have NS_FRAME_FORCE_DISPLAY_LIST_DESCEND_INTO set.
   // In particular, we really want to check ShouldDescendIntoFrame()
   // on all the frames on the line, but that might be expensive.  So
   // we approximate it by checking it on aFrame; if it's true for any
   // frame in the line, it's also true for aFrame.
   bool lineInline = aLine->IsInline();
   bool lineMayHaveTextOverflow = aTextOverflow && lineInline;
   if (!intersect && !aBuilder->ShouldDescendIntoFrame(aFrame) &&
       !lineMayHaveTextOverflow)
     return;
   // Collect our line's display items in a temporary nsDisplayListCollection,
   // so that we can apply any "text-overflow" clipping to the entire collection
   // without affecting previous lines.
   nsDisplayListCollection collection;
   // Block-level child backgrounds go on the blockBorderBackgrounds list ...
   // Inline-level child backgrounds go on the regular child content list.
   nsDisplayListSet childLists(collection,
     lineInline ? collection.Content() : collection.BlockBorderBackgrounds());
   uint32_t flags = lineInline ? nsIFrame::DISPLAY_CHILD_INLINE : 0;
   nsIFrame* kid = aLine->mFirstChild;
   int32_t n = aLine->GetChildCount();
   while (--n >= 0) {
     aFrame->BuildDisplayListForChild(aBuilder, kid, aDirtyRect,
                                      childLists, flags);
     kid = kid->GetNextSibling();
   }
   if (lineMayHaveTextOverflow) {
     aTextOverflow->ProcessLine(collection, aLine.get());
   }
   collection.MoveTo(aLists);
 }
 void
 nsBlockFrame::BuildDisplayList(nsDisplayListBuilder*   aBuilder,
                                const nsRect&           aDirtyRect,
                                const nsDisplayListSet& aLists)
 {
   int32_t drawnLines; // Will only be used if set (gLamePaintMetrics).
   int32_t depth = 0;
 #ifdef DEBUG
   if (gNoisyDamageRepair) {
       depth = GetDepth();
       nsRect ca;
       ::ComputeVisualOverflowArea(mLines, mRect.width, mRect.height, ca);
       nsFrame::IndentBy(stdout, depth);
       ListTag(stdout);
       printf(": bounds=%d,%d,%d,%d dirty(absolute)=%d,%d,%d,%d ca=%d,%d,%d,%d\n",
              mRect.x, mRect.y, mRect.width, mRect.height,
              aDirtyRect.x, aDirtyRect.y, aDirtyRect.width, aDirtyRect.height,
              ca.x, ca.y, ca.width, ca.height);
   }
   PRTime start = 0; // Initialize these variables to silence the compiler.
   if (gLamePaintMetrics) {
     start = PR_Now();
     drawnLines = 0;
   }
 #endif
   DisplayBorderBackgroundOutline(aBuilder, aLists);
   if (GetPrevInFlow()) {
     DisplayOverflowContainers(aBuilder, aDirtyRect, aLists);
     for (nsIFrame* f = mFloats.FirstChild(); f; f = f->GetNextSibling()) {
       if (f->GetStateBits() & NS_FRAME_IS_PUSHED_FLOAT)
          BuildDisplayListForChild(aBuilder, f, aDirtyRect, aLists);
     }
   }
   aBuilder->MarkFramesForDisplayList(this, mFloats, aDirtyRect);
   // Prepare for text-overflow processing.
   nsAutoPtr<TextOverflow> textOverflow(
     TextOverflow::WillProcessLines(aBuilder, this));
   // We'll collect our lines' display items here, & then append this to aLists.
   nsDisplayListCollection linesDisplayListCollection;
   // Don't use the line cursor if we might have a descendant placeholder ...
   // it might skip lines that contain placeholders but don't themselves
   // intersect with the dirty area.
   // In particular, we really want to check ShouldDescendIntoFrame()
   // on all our child frames, but that might be expensive.  So we
   // approximate it by checking it on |this|; if it's true for any
   // frame in our child list, it's also true for |this|.
   nsLineBox* cursor = aBuilder->ShouldDescendIntoFrame(this) ?
     nullptr : GetFirstLineContaining(aDirtyRect.y);
   line_iterator line_end = end_lines();
   if (cursor) {
     for (line_iterator line = mLines.begin(cursor);
          line != line_end;
          ++line) {
       nsRect lineArea = line->GetVisualOverflowArea();
       if (!lineArea.IsEmpty()) {
         // Because we have a cursor, the combinedArea.ys are non-decreasing.
         // Once we've passed aDirtyRect.YMost(), we can never see it again.
         if (lineArea.y >= aDirtyRect.YMost()) {
           break;
         }
         DisplayLine(aBuilder, lineArea, aDirtyRect, line, depth, drawnLines,
                     linesDisplayListCollection, this, textOverflow);
       }
     }
   } else {
     bool nonDecreasingYs = true;
     int32_t lineCount = 0;
     nscoord lastY = INT32_MIN;
     nscoord lastYMost = INT32_MIN;
     for (line_iterator line = begin_lines();
          line != line_end;
          ++line) {
       nsRect lineArea = line->GetVisualOverflowArea();
       DisplayLine(aBuilder, lineArea, aDirtyRect, line, depth, drawnLines,
                   linesDisplayListCollection, this, textOverflow);
       if (!lineArea.IsEmpty()) {
         if (lineArea.y < lastY
             || lineArea.YMost() < lastYMost) {
           nonDecreasingYs = false;
         }
         lastY = lineArea.y;
         lastYMost = lineArea.YMost();
       }
       lineCount++;
     }
     if (nonDecreasingYs && lineCount >= MIN_LINES_NEEDING_CURSOR) {
       SetupLineCursor();
     }
   }
   // Pick up the resulting text-overflow markers.  We append them to
   // PositionedDescendants just before we append the lines' display items,
   // so that our text-overflow markers will appear on top of this block's
   // normal content but below any of its its' positioned children.
   if (textOverflow) {
     aLists.PositionedDescendants()->AppendToTop(&textOverflow->GetMarkers());
   }
   linesDisplayListCollection.MoveTo(aLists);
   if (HasOutsideBullet()) {
     // Display outside bullets manually
     nsIFrame* bullet = GetOutsideBullet();
     BuildDisplayListForChild(aBuilder, bullet, aDirtyRect, aLists);
   }
 #ifdef DEBUG
   if (gLamePaintMetrics) {
     PRTime end = PR_Now();
     int32_t numLines = mLines.size();
     if (!numLines) numLines = 1;
     PRTime lines, deltaPerLine, delta;
     lines = int64_t(numLines);
     delta = end - start;
     deltaPerLine = delta / lines;
     ListTag(stdout);
     char buf[400];
     PR_snprintf(buf, sizeof(buf),
                 ": %lld elapsed (%lld per line) lines=%d drawn=%d skip=%d",
                 delta, deltaPerLine,
                 numLines, drawnLines, numLines - drawnLines);
     printf("%s\n", buf);
   }
 #endif
 }
 #ifdef ACCESSIBILITY
 a11y::AccType
 nsBlockFrame::AccessibleType()
 {
   // block frame may be for <hr>
   if (mContent->Tag() == nsGkAtoms::hr) {
     return a11y::eHTMLHRType;
   }
   if (!HasBullet() || !PresContext()) {
     if (!mContent->GetParent()) {
       // Don't create accessible objects for the root content node, they are redundant with
       // the nsDocAccessible object created with the document node
       return a11y::eNoType;
     }
     nsCOMPtr<nsIDOMHTMLDocument> htmlDoc =
       do_QueryInterface(mContent->GetDocument());
     if (htmlDoc) {
       nsCOMPtr<nsIDOMHTMLElement> body;
       htmlDoc->GetBody(getter_AddRefs(body));
       if (SameCOMIdentity(body, mContent)) {
         // Don't create accessible objects for the body, they are redundant with
         // the nsDocAccessible object created with the document node
         return a11y::eNoType;
       }
     }
     // Not a bullet, treat as normal HTML container
     return a11y::eHyperTextType;
   }
   // Create special list bullet accessible
   return a11y::eHTMLLiType;
 }
 #endif
 void nsBlockFrame::ClearLineCursor()
 {
   if (!(GetStateBits() & NS_BLOCK_HAS_LINE_CURSOR)) {
     return;
   }
   Properties().Delete(LineCursorProperty());
   RemoveStateBits(NS_BLOCK_HAS_LINE_CURSOR);
 }
 void nsBlockFrame::SetupLineCursor()
 {
   if (GetStateBits() & NS_BLOCK_HAS_LINE_CURSOR
       || mLines.empty()) {
     return;
   }
   Properties().Set(LineCursorProperty(), mLines.front());
   AddStateBits(NS_BLOCK_HAS_LINE_CURSOR);
 }
 nsLineBox* nsBlockFrame::GetFirstLineContaining(nscoord y)
 {
   if (!(GetStateBits() & NS_BLOCK_HAS_LINE_CURSOR)) {
     return nullptr;
   }
   FrameProperties props = Properties();
   nsLineBox* property = static_cast<nsLineBox*>
     (props.Get(LineCursorProperty()));
   line_iterator cursor = mLines.begin(property);
   nsRect cursorArea = cursor->GetVisualOverflowArea();
   while ((cursorArea.IsEmpty() || cursorArea.YMost() > y)
          && cursor != mLines.front()) {
     cursor = cursor.prev();
     cursorArea = cursor->GetVisualOverflowArea();
   }
   while ((cursorArea.IsEmpty() || cursorArea.YMost() <= y)
          && cursor != mLines.back()) {
     cursor = cursor.next();
     cursorArea = cursor->GetVisualOverflowArea();
   }
   if (cursor.get() != property) {
     props.Set(LineCursorProperty(), cursor.get());
   }
   return cursor.get();
 }
 /* virtual */ void
 nsBlockFrame::ChildIsDirty(nsIFrame* aChild)
 {
   // See if the child is absolutely positioned
   if (aChild->GetStateBits() & NS_FRAME_OUT_OF_FLOW &&
       aChild->IsAbsolutelyPositioned()) {
     // do nothing
   } else if (aChild == GetOutsideBullet()) {
     // The bullet lives in the first line, unless the first line has
     // height 0 and there is a second line, in which case it lives
     // in the second line.
     line_iterator bulletLine = begin_lines();
     if (bulletLine != end_lines() && bulletLine->BSize() == 0 &&
         bulletLine != mLines.back()) {
       bulletLine = bulletLine.next();
     }
     if (bulletLine != end_lines()) {
       MarkLineDirty(bulletLine, &mLines);
     }
     // otherwise we have an empty line list, and ReflowDirtyLines
     // will handle reflowing the bullet.
   } else {
     // Note that we should go through our children to mark lines dirty
     // before the next reflow.  Doing it now could make things O(N^2)
     // since finding the right line is O(N).
     // We don't need to worry about marking lines on the overflow list
     // as dirty; we're guaranteed to reflow them if we take them off the
     // overflow list.
     // However, we might have gotten a float, in which case we need to
     // reflow the line containing its placeholder.  So find the
     // ancestor-or-self of the placeholder that's a child of the block,
     // and mark it as NS_FRAME_HAS_DIRTY_CHILDREN too, so that we mark
     // its line dirty when we handle NS_BLOCK_LOOK_FOR_DIRTY_FRAMES.
     // We need to take some care to handle the case where a float is in
     // a different continuation than its placeholder, including marking
     // an extra block with NS_BLOCK_LOOK_FOR_DIRTY_FRAMES.
     if (!(aChild->GetStateBits() & NS_FRAME_OUT_OF_FLOW)) {
       AddStateBits(NS_BLOCK_LOOK_FOR_DIRTY_FRAMES);
     } else {
       NS_ASSERTION(aChild->IsFloating(), "should be a float");
       nsIFrame *thisFC = FirstContinuation();
       nsIFrame *placeholderPath =
         PresContext()->FrameManager()->GetPlaceholderFrameFor(aChild);
       // SVG code sometimes sends FrameNeedsReflow notifications during
       // frame destruction, leading to null placeholders, but we're safe
       // ignoring those.
       if (placeholderPath) {
         for (;;) {
           nsIFrame *parent = placeholderPath->GetParent();
           if (parent->GetContent() == mContent &&
               parent->FirstContinuation() == thisFC) {
             parent->AddStateBits(NS_BLOCK_LOOK_FOR_DIRTY_FRAMES);
             break;
           }
           placeholderPath = parent;
         }
         placeholderPath->AddStateBits(NS_FRAME_HAS_DIRTY_CHILDREN);
       }
     }
   }
   nsBlockFrameSuper::ChildIsDirty(aChild);
 }
 void
 nsBlockFrame::Init(nsIContent*      aContent,
                    nsIFrame*        aParent,
                    nsIFrame*        aPrevInFlow)
 {
   if (aPrevInFlow) {
     // Copy over the inherited block frame bits from the prev-in-flow.
     SetFlags(aPrevInFlow->GetStateBits() &
              (NS_BLOCK_FLAGS_MASK & ~NS_BLOCK_FLAGS_NON_INHERITED_MASK));
   }
   nsBlockFrameSuper::Init(aContent, aParent, aPrevInFlow);
   if (!aPrevInFlow ||
       aPrevInFlow->GetStateBits() & NS_BLOCK_NEEDS_BIDI_RESOLUTION)
     AddStateBits(NS_BLOCK_NEEDS_BIDI_RESOLUTION);
   if ((GetStateBits() &
        (NS_FRAME_FONT_INFLATION_CONTAINER | NS_BLOCK_FLOAT_MGR)) ==
       (NS_FRAME_FONT_INFLATION_CONTAINER | NS_BLOCK_FLOAT_MGR)) {
     AddStateBits(NS_FRAME_FONT_INFLATION_FLOW_ROOT);
   }
 }
 nsresult
 nsBlockFrame::SetInitialChildList(ChildListID     aListID,
                                   nsFrameList&    aChildList)
 {
   NS_ASSERTION(aListID != kPrincipalList ||
                (GetStateBits() & (NS_BLOCK_FRAME_HAS_INSIDE_BULLET |
                                   NS_BLOCK_FRAME_HAS_OUTSIDE_BULLET)) == 0,
                "how can we have a bullet already?");
   if (kAbsoluteList == aListID) {
     nsContainerFrame::SetInitialChildList(aListID, aChildList);
   }
   else if (kFloatList == aListID) {
     mFloats.SetFrames(aChildList);
   }
   else {
     nsPresContext* presContext = PresContext();
 #ifdef DEBUG
     // The only times a block that is an anonymous box is allowed to have a
     // first-letter frame are when it's the block inside a non-anonymous cell,
     // the block inside a fieldset, a scrolled content block, or a column
     // content block.  Note that this means that blocks which are the anonymous
     // block in {ib} splits do NOT get first-letter frames.  Note that
     // NS_BLOCK_HAS_FIRST_LETTER_STYLE gets set on all continuations of the
     // block.
     nsIAtom *pseudo = StyleContext()->GetPseudo();
     bool haveFirstLetterStyle =
       (!pseudo ||
        (pseudo == nsCSSAnonBoxes::cellContent &&
         mParent->StyleContext()->GetPseudo() == nullptr) ||
        pseudo == nsCSSAnonBoxes::fieldsetContent ||
        pseudo == nsCSSAnonBoxes::scrolledContent ||
        pseudo == nsCSSAnonBoxes::columnContent ||
        pseudo == nsCSSAnonBoxes::mozSVGText) &&
       !IsFrameOfType(eMathML) &&
       nsRefPtr<nsStyleContext>(GetFirstLetterStyle(presContext)) != nullptr;
     NS_ASSERTION(haveFirstLetterStyle ==
                  ((mState & NS_BLOCK_HAS_FIRST_LETTER_STYLE) != 0),
                  "NS_BLOCK_HAS_FIRST_LETTER_STYLE state out of sync");
 #endif
     AddFrames(aChildList, nullptr);
     // Create a list bullet if this is a list-item. Note that this is
     // done here so that RenumberLists will work (it needs the bullets
     // to store the bullet numbers).  Also note that due to various
     // wrapper frames (scrollframes, columns) we want to use the
     // outermost (primary, ideally, but it's not set yet when we get
     // here) frame of our content for the display check.  On the other
     // hand, we look at ourselves for the GetPrevInFlow() check, since
     // for a columnset we don't want a bullet per column.  Note that
     // the outermost frame for the content is the primary frame in
     // most cases; the ones when it's not (like tables) can't be
     // NS_STYLE_DISPLAY_LIST_ITEM).
     nsIFrame* possibleListItem = this;
     while (1) {
       nsIFrame* parent = possibleListItem->GetParent();
       if (parent->GetContent() != GetContent()) {
         break;
       }
       possibleListItem = parent;
     }
     if (NS_STYLE_DISPLAY_LIST_ITEM ==
           possibleListItem->StyleDisplay()->mDisplay &&
         !GetPrevInFlow()) {
       // Resolve style for the bullet frame
       const nsStyleList* styleList = StyleList();
       nsCSSPseudoElements::Type pseudoType;
       switch (styleList->mListStyleType) {
         case NS_STYLE_LIST_STYLE_DISC:
         case NS_STYLE_LIST_STYLE_CIRCLE:
         case NS_STYLE_LIST_STYLE_SQUARE:
           pseudoType = nsCSSPseudoElements::ePseudo_mozListBullet;
           break;
         default:
           pseudoType = nsCSSPseudoElements::ePseudo_mozListNumber;
           break;
       }
       nsIPresShell *shell = presContext->PresShell();
       nsStyleContext* parentStyle =
         CorrectStyleParentFrame(this,
           nsCSSPseudoElements::GetPseudoAtom(pseudoType))->StyleContext();
       nsRefPtr<nsStyleContext> kidSC = shell->StyleSet()->
         ResolvePseudoElementStyle(mContent->AsElement(), pseudoType,
                                   parentStyle, nullptr);
       // Create bullet frame
       nsBulletFrame* bullet = new (shell) nsBulletFrame(kidSC);
       bullet->Init(mContent, this, nullptr);
       // If the list bullet frame should be positioned inside then add
       // it to the flow now.
       if (NS_STYLE_LIST_STYLE_POSITION_INSIDE ==
             styleList->mListStylePosition) {
         nsFrameList bulletList(bullet, bullet);
         AddFrames(bulletList, nullptr);
         Properties().Set(InsideBulletProperty(), bullet);
         AddStateBits(NS_BLOCK_FRAME_HAS_INSIDE_BULLET);
       } else {
         nsFrameList* bulletList = new (shell) nsFrameList(bullet, bullet);
         Properties().Set(OutsideBulletProperty(), bulletList);
         AddStateBits(NS_BLOCK_FRAME_HAS_OUTSIDE_BULLET);
       }
     }
   }
   return NS_OK;
 }
 bool
 nsBlockFrame::BulletIsEmpty() const
 {
   NS_ASSERTION(mContent->GetPrimaryFrame()->StyleDisplay()->mDisplay ==
                  NS_STYLE_DISPLAY_LIST_ITEM && HasOutsideBullet(),
                "should only care when we have an outside bullet");
   const nsStyleList* list = StyleList();
   return list->mListStyleType == NS_STYLE_LIST_STYLE_NONE &&
          !list->GetListStyleImage();
 }
 void
 nsBlockFrame::GetBulletText(nsAString& aText) const
 {
   aText.Truncate();
   const nsStyleList* myList = StyleList();
   if (myList->GetListStyleImage() ||
       myList->mListStyleType == NS_STYLE_LIST_STYLE_DISC) {
     aText.Assign(kDiscCharacter);
   }
   else if (myList->mListStyleType == NS_STYLE_LIST_STYLE_CIRCLE) {
     aText.Assign(kCircleCharacter);
   }
   else if (myList->mListStyleType == NS_STYLE_LIST_STYLE_SQUARE) {
     aText.Assign(kSquareCharacter);
   }
   else if (myList->mListStyleType != NS_STYLE_LIST_STYLE_NONE) {
     nsBulletFrame* bullet = GetBullet();
     if (bullet) {
       nsAutoString text;
       bullet->GetListItemText(*myList, text);
       aText = text;
     }
   }
 }
 // static
 bool
 nsBlockFrame::FrameStartsCounterScope(nsIFrame* aFrame)
 {
   nsIContent* content = aFrame->GetContent();
   if (!content || !content->IsHTML())
     return false;
   nsIAtom *localName = content->NodeInfo()->NameAtom();
   return localName == nsGkAtoms::ol ||
          localName == nsGkAtoms::ul ||
          localName == nsGkAtoms::dir ||
          localName == nsGkAtoms::menu;
 }
 bool
 nsBlockFrame::RenumberLists(nsPresContext* aPresContext)
 {
   if (!FrameStartsCounterScope(this)) {
     // If this frame doesn't start a counter scope then we don't need
     // to renumber child list items.
     return false;
   }
   MOZ_ASSERT(mContent->IsHTML(),
              "FrameStartsCounterScope should only return true for HTML elements");
   // Setup initial list ordinal value
   // XXX Map html's start property to counter-reset style
   int32_t ordinal = 1;
   int32_t increment;
   if (mContent->Tag() == nsGkAtoms::ol &&
       mContent->HasAttr(kNameSpaceID_None, nsGkAtoms::reversed)) {
     increment = -1;
   } else {
     increment = 1;
   }
   nsGenericHTMLElement *hc = nsGenericHTMLElement::FromContent(mContent);
   // Must be non-null, since FrameStartsCounterScope only returns true
   // for HTML elements.
   MOZ_ASSERT(hc, "How is mContent not HTML?");
   const nsAttrValue* attr = hc->GetParsedAttr(nsGkAtoms::start);
   if (attr && attr->Type() == nsAttrValue::eInteger) {
     ordinal = attr->GetIntegerValue();
   } else if (increment < 0) {
     // <ol reversed> case, or some other case with a negative increment: count
     // up the child list
     ordinal = 0;
     for (nsIContent* kid = mContent->GetFirstChild(); kid;
          kid = kid->GetNextSibling()) {
       if (kid->IsHTML(nsGkAtoms::li)) {
         // FIXME: This isn't right in terms of what CSS says to do for
         // overflow of counters (but it only matters when this node has
         // more than numeric_limits<int32_t>::max() children).
         ordinal -= increment;
       }
     }
   }
   // Get to first-in-flow
   nsBlockFrame* block = static_cast<nsBlockFrame*>(FirstInFlow());
   return RenumberListsInBlock(aPresContext, block, &ordinal, 0, increment);
 }
 bool
 nsBlockFrame::RenumberListsInBlock(nsPresContext* aPresContext,
                                    nsBlockFrame* aBlockFrame,
                                    int32_t* aOrdinal,
                                    int32_t aDepth,
                                    int32_t aIncrement)
 {
   // Examine each line in the block
   bool foundValidLine;
   nsBlockInFlowLineIterator bifLineIter(aBlockFrame, &foundValidLine);
   if (!foundValidLine)
     return false;
   bool renumberedABullet = false;
   do {
     nsLineList::iterator line = bifLineIter.GetLine();
     nsIFrame* kid = line->mFirstChild;
     int32_t n = line->GetChildCount();
     while (--n >= 0) {
       bool kidRenumberedABullet = RenumberListsFor(aPresContext, kid, aOrdinal,
                                                    aDepth, aIncrement);
       if (kidRenumberedABullet) {
         line->MarkDirty();
         renumberedABullet = true;
       }
       kid = kid->GetNextSibling();
     }
   } while (bifLineIter.Next());
   // We need to set NS_FRAME_HAS_DIRTY_CHILDREN bits up the tree between
   // the bullet and the caller of RenumberLists.  But the caller itself
   // has to be responsible for setting the bit itself, since that caller
   // might be making a FrameNeedsReflow call, which requires that the
   // bit not be set yet.
   if (renumberedABullet && aDepth != 0) {
     aBlockFrame->AddStateBits(NS_FRAME_HAS_DIRTY_CHILDREN);
   }
   return renumberedABullet;
 }
 bool
 nsBlockFrame::RenumberListsFor(nsPresContext* aPresContext,
                                nsIFrame* aKid,
                                int32_t* aOrdinal,
                                int32_t aDepth,
                                int32_t aIncrement)
 {
   NS_PRECONDITION(aPresContext && aKid && aOrdinal, "null params are immoral!");
   // add in a sanity check for absurdly deep frame trees.  See bug 42138
   if (MAX_DEPTH_FOR_LIST_RENUMBERING < aDepth)
     return false;
   // if the frame is a placeholder, then get the out of flow frame
   nsIFrame* kid = nsPlaceholderFrame::GetRealFrameFor(aKid);
   const nsStyleDisplay* display = kid->StyleDisplay();
   // drill down through any wrappers to the real frame
   kid = kid->GetContentInsertionFrame();
   // possible there is no content insertion frame
   if (!kid)
     return false;
   bool kidRenumberedABullet = false;
   // If the frame is a list-item and the frame implements our
   // block frame API then get its bullet and set the list item
   // ordinal.
   if (NS_STYLE_DISPLAY_LIST_ITEM == display->mDisplay) {
     // Make certain that the frame is a block frame in case
     // something foreign has crept in.
     nsBlockFrame* listItem = nsLayoutUtils::GetAsBlock(kid);
     if (listItem) {
       nsBulletFrame* bullet = listItem->GetBullet();
       if (bullet) {
         bool changed;
         *aOrdinal = bullet->SetListItemOrdinal(*aOrdinal, &changed, aIncrement);
         if (changed) {
           kidRenumberedABullet = true;
           // The ordinal changed - mark the bullet frame, and any
           // intermediate frames between it and the block (are there
           // ever any?), dirty.
           // The calling code will make the necessary FrameNeedsReflow
           // call for the list ancestor.
           bullet->AddStateBits(NS_FRAME_IS_DIRTY);
           nsIFrame *f = bullet;
           do {
             nsIFrame *parent = f->GetParent();
             parent->ChildIsDirty(f);
             f = parent;
           } while (f != listItem);
         }
       }
       // XXX temporary? if the list-item has child list-items they
       // should be numbered too; especially since the list-item is
       // itself (ASSUMED!) not to be a counter-resetter.
       bool meToo = RenumberListsInBlock(aPresContext, listItem, aOrdinal,
                                         aDepth + 1, aIncrement);
       if (meToo) {
         kidRenumberedABullet = true;
       }
     }
   }
   else if (NS_STYLE_DISPLAY_BLOCK == display->mDisplay) {
     if (FrameStartsCounterScope(kid)) {
       // Don't bother recursing into a block frame that is a new
       // counter scope. Any list-items in there will be handled by
       // it.
     }
     else {
       // If the display=block element is a block frame then go ahead
       // and recurse into it, as it might have child list-items.
       nsBlockFrame* kidBlock = nsLayoutUtils::GetAsBlock(kid);
       if (kidBlock) {
         kidRenumberedABullet = RenumberListsInBlock(aPresContext, kidBlock,
                                                     aOrdinal, aDepth + 1,
                                                     aIncrement);
       }
     }
   }
   return kidRenumberedABullet;
 }
 void
 nsBlockFrame::ReflowBullet(nsIFrame* aBulletFrame,
                            nsBlockReflowState& aState,
                            nsHTMLReflowMetrics& aMetrics,
                            nscoord aLineTop)
 {
   const nsHTMLReflowState &rs = aState.mReflowState;
   // Reflow the bullet now
   nsSize availSize;
   // Make up a width since it doesn't really matter (XXX).
   availSize.width = aState.mContentArea.width;
   availSize.height = NS_UNCONSTRAINEDSIZE;
   // Get the reason right.
   // XXXwaterson Should this look just like the logic in
   // nsBlockReflowContext::ReflowBlock and nsLineLayout::ReflowFrame?
   nsHTMLReflowState reflowState(aState.mPresContext, rs,
                                 aBulletFrame, availSize);
   nsReflowStatus  status;
   aBulletFrame->WillReflow(aState.mPresContext);
   aBulletFrame->Reflow(aState.mPresContext, aMetrics, reflowState, status);
   // Get the float available space using our saved state from before we
   // started reflowing the block, so that we ignore any floats inside
   // the block.
   // FIXME: aLineTop isn't actually set correctly by some callers, since
   // they reposition the line.
   nsRect floatAvailSpace =
     aState.GetFloatAvailableSpaceWithState(aLineTop,
                                            &aState.mFloatManagerStateBefore)
           .mRect;
   // FIXME (bug 25888): need to check the entire region that the first
   // line overlaps, not just the top pixel.
   // Place the bullet now.  We want to place the bullet relative to the
   // border-box of the associated block (using the right/left margin of
   // the bullet frame as separation).  However, if a line box would be
   // displaced by floats that are *outside* the associated block, we
   // want to displace it by the same amount.  That is, we act as though
   // the edge of the floats is the content-edge of the block, and place
   // the bullet at a position offset from there by the block's padding,
   // the block's border, and the bullet frame's margin.
   // IStart from floatAvailSpace gives us the content/float start edge
   // in the current writing mode. Then we subtract out the start
   // border/padding and the bullet's width and margin to offset the position.
   WritingMode wm = rs.GetWritingMode();
   nscoord containerWidth = floatAvailSpace.XMost();
   LogicalRect logicalFAS(wm, floatAvailSpace, containerWidth);
   // Get the bullet's margin, converted to our writing mode so that we can
   // combine it with other logical values here.
   WritingMode bulletWM = reflowState.GetWritingMode();
   LogicalMargin bulletMargin =
     reflowState.ComputedLogicalMargin().ConvertTo(wm, bulletWM);
   nscoord iStart = logicalFAS.IStart(wm) -
                    rs.ComputedLogicalBorderPadding().IStart(wm) -
                    bulletMargin.IEnd(wm) -
                    aMetrics.ISize();
   // Approximate the bullets position; vertical alignment will provide
   // the final vertical location. We pass our writing-mode here, because
   // it may be different from the bullet frame's mode.
   nscoord bStart = logicalFAS.BStart(wm);
   aBulletFrame->SetRect(wm, LogicalRect(wm, LogicalPoint(wm, iStart, bStart),
                                         LogicalSize(wm, aMetrics.ISize(),
                                                     aMetrics.BSize())),
                         containerWidth);
   aBulletFrame->DidReflow(aState.mPresContext, &aState.mReflowState,
                           nsDidReflowStatus::FINISHED);
 }
 // This is used to scan frames for any float placeholders, add their
 // floats to the list represented by aList, and remove the
 // floats from whatever list they might be in. We don't search descendants
 // that are float containing blocks.  Floats that or not children of 'this'
 // are ignored (they are not added to aList).
 void
 nsBlockFrame::DoCollectFloats(nsIFrame* aFrame, nsFrameList& aList,
                               bool aCollectSiblings)
 {
   while (aFrame) {
     // Don't descend into float containing blocks.
     if (!aFrame->IsFloatContainingBlock()) {
       nsIFrame *outOfFlowFrame =
         aFrame->GetType() == nsGkAtoms::placeholderFrame ?
           nsLayoutUtils::GetFloatFromPlaceholder(aFrame) : nullptr;
       if (outOfFlowFrame && outOfFlowFrame->GetParent() == this) {
         RemoveFloat(outOfFlowFrame);
         aList.AppendFrame(nullptr, outOfFlowFrame);
         // FIXME: By not pulling floats whose parent is one of our
         // later siblings, are we risking the pushed floats getting
         // out-of-order?
         // XXXmats nsInlineFrame's lazy reparenting depends on NOT doing that.
       }
       DoCollectFloats(aFrame->GetFirstPrincipalChild(), aList, true);
       DoCollectFloats(aFrame->GetFirstChild(kOverflowList), aList, true);
     }
     if (!aCollectSiblings)
       break;
     aFrame = aFrame->GetNextSibling();
   }
 }
 void
 nsBlockFrame::CheckFloats(nsBlockReflowState& aState)
 {
 #ifdef DEBUG
   // If any line is still dirty, that must mean we're going to reflow this
   // block again soon (e.g. because we bailed out after noticing that
   // clearance was imposed), so don't worry if the floats are out of sync.
   bool anyLineDirty = false;
   // Check that the float list is what we would have built
   nsAutoTArray<nsIFrame*, 8> lineFloats;
   for (line_iterator line = begin_lines(), line_end = end_lines();
        line != line_end; ++line) {
     if (line->HasFloats()) {
       nsFloatCache* fc = line->GetFirstFloat();
       while (fc) {
         lineFloats.AppendElement(fc->mFloat);
         fc = fc->Next();
       }
     }
     if (line->IsDirty()) {
       anyLineDirty = true;
     }
   }
   nsAutoTArray<nsIFrame*, 8> storedFloats;
   bool equal = true;
   uint32_t i = 0;
   for (nsIFrame* f = mFloats.FirstChild(); f; f = f->GetNextSibling()) {
     if (f->GetStateBits() & NS_FRAME_IS_PUSHED_FLOAT)
       continue;
     storedFloats.AppendElement(f);
     if (i < lineFloats.Length() && lineFloats.ElementAt(i) != f) {
       equal = false;
     }
     ++i;
   }
   if ((!equal || lineFloats.Length() != storedFloats.Length()) && !anyLineDirty) {
     NS_WARNING("nsBlockFrame::CheckFloats: Explicit float list is out of sync with float cache");
 #if defined(DEBUG_roc)
     nsFrame::RootFrameList(PresContext(), stdout, 0);
     for (i = 0; i < lineFloats.Length(); ++i) {
       printf("Line float: %p\n", lineFloats.ElementAt(i));
     }
     for (i = 0; i < storedFloats.Length(); ++i) {
       printf("Stored float: %p\n", storedFloats.ElementAt(i));
     }
 #endif
   }
 #endif
   const nsFrameList* oofs = GetOverflowOutOfFlows();
   if (oofs && oofs->NotEmpty()) {
     // Floats that were pushed should be removed from our float
     // manager.  Otherwise the float manager's YMost or XMost might
     // be larger than necessary, causing this block to get an
     // incorrect desired height (or width).  Some of these floats
     // may not actually have been added to the float manager because
     // they weren't reflowed before being pushed; that's OK,
     // RemoveRegions will ignore them. It is safe to do this here
     // because we know from here on the float manager will only be
     // used for its XMost and YMost, not to place new floats and
     // lines.
     aState.mFloatManager->RemoveTrailingRegions(oofs->FirstChild());
   }
 }
 void
 nsBlockFrame::IsMarginRoot(bool* aTopMarginRoot, bool* aBottomMarginRoot)
 {
   if (!(GetStateBits() & NS_BLOCK_MARGIN_ROOT)) {
     nsIFrame* parent = GetParent();
     if (!parent || parent->IsFloatContainingBlock()) {
       *aTopMarginRoot = false;
       *aBottomMarginRoot = false;
       return;
     }
     if (parent->GetType() == nsGkAtoms::columnSetFrame) {
       *aTopMarginRoot = GetPrevInFlow() == nullptr;
       *aBottomMarginRoot = GetNextInFlow() == nullptr;
       return;
     }
   }
   *aTopMarginRoot = true;
   *aBottomMarginRoot = true;
 }
 /* static */
 bool
 nsBlockFrame::BlockNeedsFloatManager(nsIFrame* aBlock)
 {
   NS_PRECONDITION(aBlock, "Must have a frame");
   NS_ASSERTION(nsLayoutUtils::GetAsBlock(aBlock), "aBlock must be a block");
   nsIFrame* parent = aBlock->GetParent();
   return (aBlock->GetStateBits() & NS_BLOCK_FLOAT_MGR) ||
     (parent && !parent->IsFloatContainingBlock());
 }
 /* static */
 bool
 nsBlockFrame::BlockCanIntersectFloats(nsIFrame* aFrame)
 {
   return aFrame->IsFrameOfType(nsIFrame::eBlockFrame) &&
          !aFrame->IsFrameOfType(nsIFrame::eReplaced) &&
          !(aFrame->GetStateBits() & NS_BLOCK_FLOAT_MGR);
 }
 // Note that this width can vary based on the vertical position.
 // However, the cases where it varies are the cases where the width fits
 // in the available space given, which means that variation shouldn't
 // matter.
 /* static */
 nsBlockFrame::ReplacedElementWidthToClear
 nsBlockFrame::WidthToClearPastFloats(nsBlockReflowState& aState,
                                      const nsRect& aFloatAvailableSpace,
                                      nsIFrame* aFrame)
 {
   nscoord leftOffset, rightOffset;
   nsCSSOffsetState offsetState(aFrame, aState.mReflowState.rendContext,
                                aState.mContentArea.width);
   ReplacedElementWidthToClear result;
   aState.ComputeReplacedBlockOffsetsForFloats(aFrame, aFloatAvailableSpace,
                                               leftOffset, rightOffset);
   nscoord availWidth = aState.mContentArea.width - leftOffset - rightOffset;
   // We actually don't want the min width here; see bug 427782; we only
   // want to displace if the width won't compute to a value small enough
   // to fit.
   // All we really need here is the result of ComputeSize, and we
   // could *almost* get that from an nsCSSOffsetState, except for the
   // last argument.
   nsSize availSpace(availWidth, NS_UNCONSTRAINEDSIZE);
   nsHTMLReflowState reflowState(aState.mPresContext, aState.mReflowState,
                                 aFrame, availSpace);
   result.borderBoxWidth = reflowState.ComputedWidth() +
                           reflowState.ComputedPhysicalBorderPadding().LeftRight();
   // Use the margins from offsetState rather than reflowState so that
   // they aren't reduced by ignoring margins in overconstrained cases.
   result.marginLeft  = offsetState.ComputedPhysicalMargin().left;
   result.marginRight = offsetState.ComputedPhysicalMargin().right;
   return result;
 }
 /* static */
 nsBlockFrame*
 nsBlockFrame::GetNearestAncestorBlock(nsIFrame* aCandidate)
 {
   nsBlockFrame* block = nullptr;
   while(aCandidate) {
     block = nsLayoutUtils::GetAsBlock(aCandidate);
     if (block) {
       // yay, candidate is a block!
       return block;
     }
     // Not a block. Check its parent next.
     aCandidate = aCandidate->GetParent();
   }
   NS_NOTREACHED("Fell off frame tree looking for ancestor block!");
   return nullptr;
 }
 void
 nsBlockFrame::ComputeFinalHeight(const nsHTMLReflowState& aReflowState,
                                       nsReflowStatus*          aStatus,
                                       nscoord                  aContentHeight,
                                       const nsMargin&          aBorderPadding,
                                       nsHTMLReflowMetrics&     aMetrics,
                                       nscoord                  aConsumed)
 {
   // Figure out how much of the computed height should be
   // applied to this frame.
   nscoord computedHeightLeftOver = GetEffectiveComputedHeight(aReflowState,
                                                               aConsumed);
   NS_ASSERTION(!( IS_TRUE_OVERFLOW_CONTAINER(this)
                   && computedHeightLeftOver ),
                "overflow container must not have computedHeightLeftOver");
   aMetrics.Height() =
     NSCoordSaturatingAdd(NSCoordSaturatingAdd(aBorderPadding.top,
                                               computedHeightLeftOver),
                          aBorderPadding.bottom);
   if (NS_FRAME_IS_NOT_COMPLETE(*aStatus)
       && aMetrics.Height() < aReflowState.AvailableHeight()) {
     // We ran out of height on this page but we're incomplete
     // Set status to complete except for overflow
     NS_FRAME_SET_OVERFLOW_INCOMPLETE(*aStatus);
   }
   if (NS_FRAME_IS_COMPLETE(*aStatus)) {
     if (computedHeightLeftOver > 0 &&
         NS_UNCONSTRAINEDSIZE != aReflowState.AvailableHeight() &&
         aMetrics.Height() > aReflowState.AvailableHeight()) {
       if (ShouldAvoidBreakInside(aReflowState)) {
         *aStatus = NS_INLINE_LINE_BREAK_BEFORE();
         return;
       }
       // We don't fit and we consumed some of the computed height,
       // so we should consume all the available height and then
       // break.  If our bottom border/padding straddles the break
       // point, then this will increase our height and push the
       // border/padding to the next page/column.
       aMetrics.Height() = std::max(aReflowState.AvailableHeight(),
                                  aContentHeight);
       NS_FRAME_SET_INCOMPLETE(*aStatus);
       if (!GetNextInFlow())
         *aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
     }
   }
 }
 nsresult
 nsBlockFrame::ResolveBidi()
 {
   NS_ASSERTION(!GetPrevInFlow(),
                "ResolveBidi called on non-first continuation");
   nsPresContext* presContext = PresContext();
   if (!presContext->BidiEnabled()) {
     return NS_OK;
   }
   return nsBidiPresUtils::Resolve(this);
 }
 #ifdef DEBUG
 void
 nsBlockFrame::VerifyLines(bool aFinalCheckOK)
 {
   if (!gVerifyLines) {
     return;
   }
   if (mLines.empty()) {
     return;
   }
   nsLineBox* cursor = GetLineCursor();
   // Add up the counts on each line. Also validate that IsFirstLine is
   // set properly.
   int32_t count = 0;
   line_iterator line, line_end;
   for (line = begin_lines(), line_end = end_lines();
        line != line_end;
        ++line) {
     if (line == cursor) {
       cursor = nullptr;
     }
     if (aFinalCheckOK) {
       NS_ABORT_IF_FALSE(line->GetChildCount(), "empty line");
       if (line->IsBlock()) {
         NS_ASSERTION(1 == line->GetChildCount(), "bad first line");
       }
     }
     count += line->GetChildCount();
   }
   // Then count the frames
   int32_t frameCount = 0;
   nsIFrame* frame = mLines.front()->mFirstChild;
   while (frame) {
     frameCount++;
     frame = frame->GetNextSibling();
   }
   NS_ASSERTION(count == frameCount, "bad line list");
   // Next: test that each line has right number of frames on it
   for (line = begin_lines(), line_end = end_lines();
        line != line_end;
         ) {
     count = line->GetChildCount();
     frame = line->mFirstChild;
     while (--count >= 0) {
       frame = frame->GetNextSibling();
     }
     ++line;
     if ((line != line_end) && (0 != line->GetChildCount())) {
       NS_ASSERTION(frame == line->mFirstChild, "bad line list");
     }
   }
   if (cursor) {
     FrameLines* overflowLines = GetOverflowLines();
     if (overflowLines) {
       line_iterator line = overflowLines->mLines.begin();
       line_iterator line_end = overflowLines->mLines.end();
       for (; line != line_end; ++line) {
         if (line == cursor) {
           cursor = nullptr;
           break;
         }
       }
     }
   }
   NS_ASSERTION(!cursor, "stale LineCursorProperty");
 }
 void
 nsBlockFrame::VerifyOverflowSituation()
 {
   nsBlockFrame* flow = static_cast<nsBlockFrame*>(FirstInFlow());
   while (flow) {
     FrameLines* overflowLines = flow->GetOverflowLines();
     if (overflowLines) {
       NS_ASSERTION(!overflowLines->mLines.empty(),
                    "should not be empty if present");
       NS_ASSERTION(overflowLines->mLines.front()->mFirstChild,
                    "bad overflow lines");
       NS_ASSERTION(overflowLines->mLines.front()->mFirstChild ==
                    overflowLines->mFrames.FirstChild(),
                    "bad overflow frames / lines");
     }
     nsLineBox* cursor = flow->GetLineCursor();
     if (cursor) {
       line_iterator line = flow->begin_lines();
       line_iterator line_end = flow->end_lines();
       for (; line != line_end && line != cursor; ++line)
         ;
       if (line == line_end && overflowLines) {
         line = overflowLines->mLines.begin();
         line_end = overflowLines->mLines.end();
         for (; line != line_end && line != cursor; ++line)
           ;
         }
       MOZ_ASSERT(line != line_end, "stale LineCursorProperty");
     }
     flow = static_cast<nsBlockFrame*>(flow->GetNextInFlow());
   }
 }
 int32_t
 nsBlockFrame::GetDepth() const
 {
   int32_t depth = 0;
   nsIFrame* parent = mParent;
   while (parent) {
     parent = parent->GetParent();
     depth++;
   }
   return depth;
 }
 #endif

The Tor Browser / annotate

layout/generic/nsBlockFrame.cpp@6474c204b198 (annotated)

layout/generic/nsBlockFrame.cpp