The Tor Browser: nsprpub/pr/include/prtrace.h@6474c204b198 (annotated)

nsprpub/pr/include/prtrace.h@6474c204b198 (annotated)

nsprpub/pr/include/prtrace.h

Wed, 31 Dec 2014 06:09:35 +0100

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Wed, 31 Dec 2014 06:09:35 +0100
changeset 0: 6474c204b198
permissions: -rw-r--r--

Cloned upstream origin tor-browser at tor-browser-31.3.0esr-4.5-1-build1
revision ID fc1c9ff7c1b2defdbc039f12214767608f46423f for hacking purpose.

 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
 /* This Source Code Form is subject to the terms of the Mozilla Public
  * License, v. 2.0. If a copy of the MPL was not distributed with this
  * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
 #ifndef prtrace_h___
 #define prtrace_h___
 /*
 ** prtrace.h -- NSPR's Trace Facility.
 **
 ** The Trace Facility provides a means to trace application
 ** program events within a process. When implementing an
 ** application program an engineer may insert a "Trace" function
 ** call, passing arguments to be traced. The "Trace" function
 ** combines the user trace data with identifying data and
 ** writes this data in time ordered sequence into a circular
 ** in-memory buffer; when the buffer fills, it wraps.
 **
 ** Functions are provided to set and/or re-configure the size of
 ** the trace buffer, control what events are recorded in the
 ** buffer, enable and disable tracing based on specific user
 ** supplied data and other control functions. Methods are provided
 ** to record the trace entries in the in-memory trace buffer to
 ** a file.
 **
 ** Tracing may cause a performance degredation to the application
 ** depending on the number and placement of calls to the tracing
 ** facility. When tracing is compiled in and all tracing is
 ** disabled via the runtime controls, the overhead should be
 ** minimal. ... Famous last words, eh?
 **
 ** When DEBUG is defined at compile time, the Trace Facility is
 ** compiled as part of NSPR and any application using NSPR's
 ** header files will have tracing compiled in. When DEBUG is not
 ** defined, the Trace Facility is not compiled into NSPR nor
 ** exported in its header files.  If the Trace Facility is
 ** desired in a non-debug build, then FORCE_NSPR_TRACE may be
 ** defined at compile time for both the optimized build of NSPR
 ** and the application. NSPR and any application using  NSPR's
 ** Trace Facility must be compiled with the same level of trace
 ** conditioning or unresolved references may be realized at link
 ** time.
 **
 ** For any of the Trace Facility methods that requires a trace
 ** handle as an input argument, the caller must ensure that the
 ** trace handle argument is valid. An invalid trace handle
 ** argument may cause unpredictable results.
 **
 ** Trace Facility methods are thread-safe and SMP safe.
 **
 ** Users of the Trace Facility should use the defined macros to
 ** invoke trace methods, not the function calls directly. e.g.
 ** PR_TRACE( h1,0,1,2, ...); not PR_Trace(h1,0,1,2, ...);
 **
 ** Application designers should be aware of the effects of
 ** debug and optimized build differences when using result of the
 ** Trace Facility macros in expressions.
 **
 ** See Also: prcountr.h
 **
 ** /lth. 08-Jun-1998.
 */
 #include "prtypes.h"
 #include "prthread.h"
 #include "prtime.h"
 PR_BEGIN_EXTERN_C
 /*
 ** Opaque type for the trace handle
 ** ... Don't even think about looking in here.
 **
 */
 typedef void *  PRTraceHandle;
 /*
 ** PRTraceEntry -- A trace entry in the in-memory trace buffer
 ** looks like this.
 **
 */
 typedef struct PRTraceEntry
 {
     PRThread        *thread;        /* The thread creating the trace entry */
     PRTraceHandle   handle;         /* PRTraceHandle creating the trace entry */
     PRTime          time;           /* Value of PR_Now() at time of trace entry */
     PRUint32        userData[8];    /* user supplied trace data */
 } PRTraceEntry;
 /*
 ** PRTraceOption -- command operands to
 ** PR_[Set|Get]TraceOption(). See descriptive meanings there.
 **
 */
 typedef enum PRTraceOption
 {
     PRTraceBufSize,
     PRTraceEnable,
     PRTraceDisable,
     PRTraceSuspend,
     PRTraceResume,
     PRTraceSuspendRecording,
     PRTraceResumeRecording,
     PRTraceLockHandles,
     PRTraceUnLockHandles,
     PRTraceStopRecording
 } PRTraceOption;
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_DEFINE_TRACE() -- Define a PRTraceHandle
 **
 ** DESCRIPTION: PR_DEFINE_TRACE() is used to define a trace
 ** handle.
 **
 */
 #define PR_DEFINE_TRACE(name) PRTraceHandle name
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_INIT_TRACE_HANDLE() -- Set the value of a PRTraceHandle
 **
 ** DESCRIPTION:
 ** PR_INIT_TRACE_HANDLE() sets the value of a PRTraceHandle
 ** to value. e.g. PR_INIT_TRACE_HANDLE( myHandle, NULL );
 **
 */
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_INIT_TRACE_HANDLE(handle,value)\
     (handle) = (PRCounterHandle)(value)
 #else
 #define PR_INIT_TRACE_HANDLE(handle,value)
 #endif
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_CreateTrace() -- Create a trace handle
 **
 ** DESCRIPTION:
 **  PR_CreateTrace() creates a new trace handle. Tracing is
 **  enabled for this handle when it is created. The trace handle
 **  is intended for use in other Trace Facility calls.
 **
 **  PR_CreateTrace() registers the QName, RName and description
 **  data so that this data can be retrieved later.
 **
 ** INPUTS:
 **  qName: pointer to string. QName for this trace handle.
 **
 **  rName: pointer to string. RName for this trace handle.
 **
 **  description: pointer to string. Descriptive data about this
 **  trace handle.
 **
 ** OUTPUTS:
 **  Creates the trace handle.
 **  Registers the QName and RName with the trace facility.
 **
 ** RETURNS:
 **  PRTraceHandle
 **
 ** RESTRICTIONS:
 **  qName is limited to 31 characters.
 **  rName is limited to 31 characters.
 **  description is limited to 255 characters.
 **
 */
 #define PRTRACE_NAME_MAX 31
 #define PRTRACE_DESC_MAX 255
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_CREATE_TRACE(handle,qName,rName,description)\
     (handle) = PR_CreateTrace((qName),(rName),(description))
 #else
 #define PR_CREATE_TRACE(handle,qName,rName,description)
 #endif
 NSPR_API(PRTraceHandle)
 	PR_CreateTrace(
     	const char *qName,          /* QName for this trace handle */
 	    const char *rName,          /* RName for this trace handle */
 	    const char *description     /* description for this trace handle */
 );
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_DestroyTrace() -- Destroy a trace handle
 **
 ** DESCRIPTION:
 **  PR_DestroyTrace() removes the referenced trace handle and
 ** associated QName, RName and description data from the Trace
 ** Facility.
 **
 ** INPUTS: handle. A PRTraceHandle
 **
 ** OUTPUTS:
 **  The trace handle is unregistered.
 **  The QName, RName and description are removed.
 **
 ** RETURNS: void
 **
 ** RESTRICTIONS:
 **
 */
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_DESTROY_TRACE(handle)\
     PR_DestroyTrace((handle))
 #else
 #define PR_DESTROY_TRACE(handle)
 #endif
 NSPR_API(void)
 	PR_DestroyTrace(
 		PRTraceHandle handle    /* Handle to be destroyed */
 );
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_Trace() -- Make a trace entry in the in-memory trace
 **
 ** DESCRIPTION:
 ** PR_Trace() makes an entry in the in-memory trace buffer for
 ** the referenced trace handle. The next logically available
 ** PRTraceEntry is used; when the next trace entry would overflow
 ** the trace table, the table wraps.
 **
 ** PR_Trace() for a specific trace handle may be disabled by
 ** calling PR_SetTraceOption() specifying PRTraceDisable for the
 ** trace handle to be disabled.
 **
 ** INPUTS:
 ** handle: PRTraceHandle. The trace handle for this trace.
 **
 ** userData[0..7]: unsigned 32bit integers. user supplied data
 ** that is copied into the PRTraceEntry
 **
 ** OUTPUTS:
 **  A PRTraceEntry is (conditionally) formatted in the in-memory
 ** trace buffer.
 **
 ** RETURNS: void.
 **
 ** RESTRICTIONS:
 **
 */
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_TRACE(handle,ud0,ud1,ud2,ud3,ud4,ud5,ud6,ud7)\
     PR_Trace((handle),(ud0),(ud1),(ud2),(ud3),(ud4),(ud5),(ud6),(ud7))
 #else
 #define PR_TRACE(handle,ud0,ud1,ud2,ud3,ud4,ud5,ud6,ud7)
 #endif
 NSPR_API(void)
 	PR_Trace(
     	PRTraceHandle handle,       /* use this trace handle */
 	    PRUint32    userData0,      /* User supplied data word 0 */
 	    PRUint32    userData1,      /* User supplied data word 1 */
 	    PRUint32    userData2,      /* User supplied data word 2 */
 	    PRUint32    userData3,      /* User supplied data word 3 */
 	    PRUint32    userData4,      /* User supplied data word 4 */
 	    PRUint32    userData5,      /* User supplied data word 5 */
 	    PRUint32    userData6,      /* User supplied data word 6 */
 	    PRUint32    userData7       /* User supplied data word 7 */
 );
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_SetTraceOption() -- Control the Trace Facility
 **
 ** DESCRIPTION:
 ** PR_SetTraceOption() controls the Trace Facility. Depending on
 ** command and value, attributes of the Trace Facility may be
 ** changed.
 **
 ** INPUTS:
 **  command: An enumerated value in the set of PRTraceOption.
 **  value: pointer to the data to be set. Type of the data is
 **  dependent on command; for each value of command, the type
 **  and meaning of dereferenced value is shown.
 **
 **  PRTraceBufSize: unsigned long: the size of the trace buffer,
 ** in bytes.
 **
 **  PRTraceEnable: PRTraceHandle. The trace handle to be
 ** enabled.
 **
 **  PRTraceDisable: PRTraceHandle. The trace handle to be
 ** disabled.
 **
 **  PRTraceSuspend: void. value must be NULL. All tracing is
 ** suspended.
 **
 **  PRTraceResume: void. value must be NULL. Tracing for all
 ** previously enabled, prior to a PRTraceSuspend, is resumed.
 **
 **  PRTraceStopRecording: void. value must be NULL. If recording
 ** (see: ** PR_RecordTraceEntries()) is being done,
 ** PRTraceStopRecording causes PR_RecordTraceEntries() to return
 ** to its caller. If recording is not being done, this function
 ** has no effect.
 **
 **  PRTraceSuspendRecording: void. Must be NULL. If recording is
 ** being done, PRTraceSuspendRecording causes further writes to
 ** the trace file to be suspended. Data in the in-memory
 ** trace buffer that would ordinarily be written to the
 ** trace file will not be written. Trace entries will continue
 ** to be entered in the in-memory buffer. If the Trace Facility
 ** recording is already in a suspended state, the call has no
 ** effect.
 **
 **  PRTraceResumeRecording: void. value must be NULL. If
 ** recording for the Trace Facility has been previously been
 ** suspended, this causes recording to resume. Recording resumes
 ** with the next in-memory buffer segment that would be written
 ** if trace recording had not been suspended. If recording is
 ** not currently suspended, the call has no effect.
 **
 **  PRTraceLockHandles: void. value must be NULL. Locks the
 ** trace handle lock. While the trace handle lock is held,
 ** calls to PR_CreateTrace() will block until the lock is
 ** released.
 **
 **  PRTraceUnlockHandles: void. value must be NULL. Unlocks the
 ** trace handle lock.
 **
 ** OUTPUTS:
 **  The operation of the Trace Facility may be changed.
 **
 ** RETURNS: void
 **
 ** RESTRICTIONS:
 **
 */
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_SET_TRACE_OPTION(command,value)\
     PR_SetTraceOption((command),(value))
 #else
 #define PR_SET_TRACE_OPTION(command,value)
 #endif
 NSPR_API(void)
 	PR_SetTraceOption(
 	    PRTraceOption command,  /* One of the enumerated values */
 	    void *value             /* command value or NULL */
 );
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_GetTraceOption() -- Retrieve settings from the Trace Facility
 **
 ** DESCRIPTION:
 ** PR_GetTraceOption() retrieves the current setting of the
 ** Trace Facility control depending on command.
 **
 **
 **  PRTraceBufSize: unsigned long: the size of the trace buffer,
 ** in bytes.
 **
 **
 ** INPUTS:
 **  command: one of the enumerated values in PRTraceOptions
 ** valid for PR_GetTraceOption().
 **
 ** OUTPUTS:
 **  dependent on command.
 **
 ** RETURNS: void
 **
 ** RESTRICTIONS:
 **
 */
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_GET_TRACE_OPTION(command,value)\
     PR_GetTraceOption((command),(value))
 #else
 #define PR_GET_TRACE_OPTION(command,value)
 #endif
 NSPR_API(void)
 	PR_GetTraceOption(
     	PRTraceOption command,  /* One of the enumerated values */
 	    void *value             /* command value or NULL */
 );
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_GetTraceHandleFromName() -- Retrieve an existing
 ** handle by name.
 **
 ** DESCRIPTION:
 ** PR_GetTraceHandleFromName() retreives an existing tracehandle
 ** using the name specified by qName and rName.
 **
 ** INPUTS:
 **  qName: pointer to string. QName for this trace handle.
 **
 **  rName: pointer to string. RName for this trace handle.
 **
 **
 ** OUTPUTS: returned.
 **
 ** RETURNS:
 **  PRTraceHandle associated with qName and rName or NULL when
 ** there is no match.
 **
 ** RESTRICTIONS:
 **
 */
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_GET_TRACE_HANDLE_FROM_NAME(handle,qName,rName)\
     (handle) = PR_GetTraceHandleFromName((qName),(rName))
 #else
 #define PR_GET_TRACE_HANDLE_FROM_NAME(handle,qName,rName)
 #endif
 NSPR_API(PRTraceHandle)
 	PR_GetTraceHandleFromName(
     	const char *qName,      /* QName search argument */
         const char *rName       /* RName search argument */
 );
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_GetTraceNameFromHandle() -- Retreive trace name
 ** by bandle.
 **
 ** DESCRIPTION:
 ** PR_GetTraceNameFromHandle() retreives the existing qName,
 ** rName, and description for the referenced trace handle.
 **
 ** INPUTS: handle: PRTraceHandle.
 **
 ** OUTPUTS: pointers to the Trace Facility's copy of qName,
 ** rName and description. ... Don't mess with these values.
 ** They're mine.
 **
 ** RETURNS: void
 **
 ** RESTRICTIONS:
 **
 */
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_GET_TRACE_NAME_FROM_HANDLE(handle,qName,rName,description)\
     PR_GetTraceNameFromHandle((handle),(qName),(rName),(description))
 #else
 #define PR_GET_TRACE_NAME_FROM_HANDLE(handle,qName,rName,description)
 #endif
 NSPR_API(void)
 	PR_GetTraceNameFromHandle(
     	PRTraceHandle handle,       /* handle as search argument */
 	    const char **qName,         /* pointer to associated QName */
 	    const char **rName,         /* pointer to associated RName */
     	const char **description    /* pointer to associated description */
 );
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_FindNextTraceQname() -- Retrieive a QName handle
 ** iterator.
 **
 ** DESCRIPTION:
 ** PR_FindNextTraceQname() retreives the first or next trace
 ** QName handle, depending on the value of handle, from the trace
 ** database. The PRTraceHandle returned can be used as an
 ** iterator to traverse the QName handles in the Trace database.
 **
 ** INPUTS:
 **  handle: When NULL, PR_FindNextQname() returns the first QName
 ** handle. When a handle is a valid PRTraceHandle previously
 ** retreived using PR_FindNextQname() the next QName handle is
 ** retreived.
 **
 ** OUTPUTS: returned.
 **
 ** RETURNS:
 **  PRTraceHandle or NULL when there are no trace handles.
 **
 ** RESTRICTIONS:
 **  Iterating thru the trace handles via FindFirst/FindNext
 ** should be done under protection of the trace handle lock.
 ** See: PR_SetTraceOption( PRLockTraceHandles ).
 **
 */
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_FIND_NEXT_TRACE_QNAME(next,handle)\
     (next) = PR_FindNextTraceQname((handle))
 #else
 #define PR_FIND_NEXT_TRACE_QNAME(next,handle)
 #endif
 NSPR_API(PRTraceHandle)
 	PR_FindNextTraceQname(
         PRTraceHandle handle
 );
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_FindNextTraceRname() -- Retrieive an RName handle
 ** iterator.
 **
 ** DESCRIPTION:
 ** PR_FindNextTraceRname() retreives the first or next trace
 ** RName handle, depending on the value of handle, from the trace
 ** database. The PRTraceHandle returned can be used as an
 ** iterator to traverse the RName handles in the Trace database.
 **
 ** INPUTS:
 **  rhandle: When NULL, PR_FindNextRname() returns the first
 ** RName handle. When a handle is a valid PRTraceHandle
 ** previously retreived using PR_FindNextRname() the next RName
 ** handle is retreived.
 **  qhandle: A valid PRTraceHandle retruned from a previous call
 ** to PR_FIND_NEXT_TRACE_QNAME().
 **
 ** OUTPUTS: returned.
 **
 ** RETURNS:
 **  PRTraceHandle or NULL when there are no trace handles.
 **
 ** RESTRICTIONS:
 **  Iterating thru the trace handles via FindNext should be done
 ** under protection of the trace handle lock. See: (
 ** PR_SetTraceOption( PRLockTraceHandles ).
 **
 */
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_FIND_NEXT_TRACE_RNAME(next,rhandle,qhandle)\
     (next) = PR_FindNextTraceRname((rhandle),(qhandle))
 #else
 #define PR_FIND_NEXT_TRACE_RNAME(next,rhandle,qhandle)
 #endif
 NSPR_API(PRTraceHandle)
 	PR_FindNextTraceRname(
         PRTraceHandle rhandle,
         PRTraceHandle qhandle
 );
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_RecordTraceEntries() -- Write trace entries to external media
 **
 ** DESCRIPTION:
 ** PR_RecordTraceEntries() causes entries in the in-memory trace
 ** buffer to be written to external media.
 **
 ** When PR_RecordTraceEntries() is called from an application
 ** thread, the function appears to block until another thread
 ** calls PR_SetTraceOption() with the PRTraceStopRecording
 ** option. This suggests that PR_RecordTraceEntries() should be
 ** called from a user supplied thread whose only job is to
 ** record trace entries.
 **
 ** The environment variable NSPR_TRACE_LOG controls the operation
 ** of this function. When NSPR_TRACE_LOG is not defined in the
 ** environment, no recording of trace entries occurs. When
 ** NSPR_TRACE_LOG is defined, the value of its definition must be
 ** the filename of the file to receive the trace entry buffer.
 **
 ** PR_RecordTraceEntries() attempts to record the in-memory
 ** buffer to a file, subject to the setting of the environment
 ** variable NSPR_TRACE_LOG. It is possible because of system
 ** load, the thread priority of the recording thread, number of
 ** active trace records being written over time, and other
 ** variables that some trace records can be lost. ... In other
 ** words: don't bet the farm on getting everything.
 **
 ** INPUTS: none
 **
 ** OUTPUTS: none
 **
 ** RETURNS: PR_STATUS
 **    PR_SUCCESS no errors were found.
 **    PR_FAILURE errors were found.
 **
 ** RESTRICTIONS:
 ** Only one thread can call PR_RecordTraceEntries() within a
 ** process.
 **
 ** On error, PR_RecordTraceEntries() may return prematurely.
 **
 */
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_RECORD_TRACE_ENTRIES()\
 	PR_RecordTraceEntries()
 #else
 #define PR_RECORD_TRACE_ENTRIES()
 #endif
 NSPR_API(void)
 	PR_RecordTraceEntries(
         void
 );
 /* -----------------------------------------------------------------------
 ** FUNCTION: PR_GetTraceEntries() -- Retreive trace entries from
 ** the Trace Facility
 **
 ** DESCRIPTION:
 ** PR_GetTraceEntries() retreives trace entries from the Trace
 ** Facility. Up to count trace entries are copied from the Trace
 ** Facility into buffer. Only those trace entries that have not
 ** been copied via a previous call to PR_GetTraceEntries() are
 ** copied. The actual number copied is placed in the PRInt32
 ** variable pointed to by found.
 **
 ** If more than count trace entries have entered the Trace
 ** Facility since the last call to PR_GetTraceEntries()
 ** a lost data condition is returned. In this case, the most
 ** recent count trace entries are copied into buffer and found is
 ** set to count.
 **
 ** INPUTS:
 **  count. The number of trace entries to be copied into buffer.
 **
 **
 ** OUTPUTS:
 **  buffer. An array of PRTraceEntries. The buffer is supplied
 ** by the caller.
 **
 ** found: 32bit signed integer. The number of PRTraceEntries
 ** actually copied. found is always less than or equal to count.
 **
 ** RETURNS:
 **  zero when there is no lost data.
 **  non-zero when some PRTraceEntries have been lost.
 **
 ** RESTRICTIONS:
 ** This is a real performance pig. The copy out operation is bad
 ** enough, but depending on then frequency of calls to the
 ** function, serious performance impact to the operating
 ** application may be realized. ... YMMV.
 **
 */
 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE)
 #define PR_GET_TRACE_ENTRIES(buffer,count,found)\
         PR_GetTraceEntries((buffer),(count),(found))
 #else
 #define PR_GET_TRACE_ENTRIES(buffer,count,found)
 #endif
 NSPR_API(PRIntn)
     PR_GetTraceEntries(
         PRTraceEntry    *buffer,    /* where to write output */
         PRInt32         count,      /* number to get */
         PRInt32         *found      /* number you got */
 );
 PR_END_EXTERN_C
 #endif /* prtrace_h___ */

The Tor Browser / annotate

nsprpub/pr/include/prtrace.h@6474c204b198 (annotated)

nsprpub/pr/include/prtrace.h