The Tor Browser: security/nss/tests/header@6474c204b198 (annotated)

security/nss/tests/header@6474c204b198 (annotated)

security/nss/tests/header

Wed, 31 Dec 2014 06:09:35 +0100

author: Michael Schloh von Bennewitz <michael@schloh.com>
date: Wed, 31 Dec 2014 06:09:35 +0100
changeset 0: 6474c204b198
permissions: -rw-r--r--

Cloned upstream origin tor-browser at tor-browser-31.3.0esr-4.5-1-build1
revision ID fc1c9ff7c1b2defdbc039f12214767608f46423f for hacking purpose.

 #! /bin/sh
 ########################################################################
 #
 # /u/sonmi/bin/header - /u/svbld/bin/init/nss/header
 #
 # variables, utilities and shellfunctions global to NSS QA
 # needs to work on all Unix platforms
 #
 # included from (don't expect this to be up to date)
 # --------------------------------------------------
 #   qa_stat
 #   mksymlinks
 #   nssqa
 #
 # parameters
 # ----------
 #   nssversion (supported: 30b, 31, 332, tip 32)
 #   builddate (default - today)
 #
 # options
 # -------
 #   -y answer all questions with y - use at your own risk... ignores warnings
 #   -s silent (only usefull with -y)
 #   -h, -? - you guessed right - displays this text
 #   -d debug
 #   -f <filename> - write the (error)output to filename
 #   -fcronfile produces the resultfiles in the same locations
 #       as would have been produced with -cron
 #   -m <mailinglist> - send filename to mailinglist (csl) only useful
 #       with -f
 #   -ml <mailinglist> - send link to filename to mailinglist (csl)
 #       only useful with -f
 #   -cron equivalient to -y -s -d -f $RESULTDIR/$HOST.<scriptname>
 #   -t  run on a tinderbox build that means: local, from the startlocation
 #   -l <mozroot directory>  run on a local build mozroot
 #   -ln <mozroot> copy a networkbuild to a local directory mozroot,
 #        used for networkindipendend QA
 #   -lt try to copy a networkbuild to a local directory, if not possible
 #        run on the network
 #        used for networkindipendend QA
 #
 # special strings
 # ---------------
 #   FIXME ... known problems, search for this string
 #   NOTE .... unexpected behavior
 #
 # moduls (not yet)
 # ----------------
 #   --# INIT
 #   --# USERCOM
 #   --# UTILS
 #
 # FIXME - split in init / usercom / utils
 #
 ########################################################################
 #------------------------------# INIT #------------------------------
 # below the option flags get initialized
 if [ -z "$QASCRIPT_DIR" ]
 then
     QASCRIPT_DIR=`dirname $0`
     if [ "$QASCRIPT_DIR" = '.' ]
     then
         QASCRIPT_DIR=`pwd`
     fi
 fi
 export QASCRIPT_DIR
 O_HWACC=OFF
 if [ -z "$O_ALWAYS_YES" ] ; then
     O_ALWAYS_YES=OFF    # turned on by -y answer all questions with y
 fi
 if [ -z "$O_INIT" ] # header is global, some including scripts may not
 then                # want the init to run, the others don't need to bother
     O_INIT=ON
 fi
 if [ -z "$O_PARAM" ] # header is global, some including scripts may not
 then                 # require parameters, the others don't need to bother
     O_PARAM=ON
 fi
 if [ -z "$O_OPTIONS" ] # header is global, some including scripts may not
 then                # permit options, they don't need to bother
     O_OPTIONS=OFF
 fi
 O_SILENT=OFF        # turned on by -s silent (only usefull with -y)
 if  [ -z "$O_DEBUG" ] ; then
     O_DEBUG=OFF     # turned on by -d - calls to Debug produce output when ON
 fi
 O_FILE=OFF          # turned on by -f echo all output to a file $FILENAME
 O_CRON=OFF          # turned on by -cron cron use only
 O_CRONFILE=OFF      # turned on by -cron cron and -fcron
 O_LOCAL=OFF         # turned on by -l* run on a local build in $LOCAL_MOZROOT
 O_LN=OFF            # turned on by -ln and -lt, test a networkbuild locally
 O_MAIL=OFF          # turned on by -m - sends email
 O_MAIL_LINK=OFF     # turned on by -ml - sends email
 O_TBX=OFF           # turned on by -t run on a tinderbox build
                     # that means: local, from the startlocation
 if  [ -z "$DOMSUF" ]
 then
     DOMSUF=red.iplanet.com
     DS_WAS_SET=FALSE
 else
     DS_WAS_SET=TRUE
 fi
 TMPFILES=""
 WAIT_FOR=600  # if waiting for an event sleep n seconds before rechecking
               # recomended value 10 minutes 600
 WAIT_TIMES=30 # recheck n times before giving up - recomended 30 - total of 5h
 if [ -z "$QAYEAR" ]   # may I introduce - the y2k+1 bug? QA for last year
 then                  # might not work
     QAYEAR=`date +%Y`
 fi
 if [ -z "$TMP" ]
 then
     if [  -z "$TEMP" ]
     then
         TMP="/tmp"
     else
         TMP=$TEMP
     fi
 fi
 if [ ! -w "$TMP" ]
 then
     echo "Can't write to tmp directory $TMP - exiting"
     echo "Can't write to tmp directory $TMP - exiting" >&2
     exit 1
 fi
 KILLPIDS="$TMP/killpids.$$"
 export KILLERPIDS
 TMPFILES="$TMPFILES $KILLPIDS"
 KILL_SELFSERV=OFF   # if sourcing script sets this to on cleanup will also
                     # kill the running selfserv processes
                     # Set the masterbuilds
 if [ -z "$UX_MASTERBUILD" ]
 then
     UX_MASTERBUILD=booboo_Solaris8
     #if [ ! -d $UX_MASTERBUILD ] ; then
         #UX_MASTERBUILD=booboo_Solaris8_forte6
     #fi
     UX_MB_WAS_SET=FALSE
 else
     UX_MB_WAS_SET=TRUE
 fi
 if [ -z "$NT_MASTERBUILD" ]
 then
     NT_MASTERBUILD=blowfish_NT4.0_Win95
     NT_MB_WAS_SET=FALSE      # in this case later functions can override if
                              # they find a different build that looks like NT
 else
     NT_MB_WAS_SET=TRUE
 fi
 if [ -z "$MASTERBUILD" ]
 then
     MASTERBUILD=$UX_MASTERBUILD
 fi
                     # Set the default build
 if [ -z "$BUILDNUMBER" ]
 then
     BUILDNUMBER=1
 fi
 export BUILDNUMBER
 O_LDIR=OFF          #local QA dir for NT, temporary
 if [ -z "$WIN_WAIT_FOREVER" ]    # header is global, some including scripts
 then                # want the init to wait forever for directories to
                     # appear (windows only) if OFF exit, if ON wait forever
     WIN_WAIT_FOREVER=OFF
 fi
                           # NOTE: following variables have to change
                           # from release to release
 if [ -z "$BC_MASTER" ]    # master directory for backwardscompatibility testing
 then
     RH="NO"
     grep 7.1 /etc/redhat-release > /dev/null 2>/dev/null && RH="YES"
     grep 7.2 /etc/redhat-release > /dev/null 2>/dev/null && RH="YES"
     if [ "$RH" = "YES" ]
     then                      # NSS-3-3-1RTM
         BC_UX_MASTER=nss331/builds/20010928.2.331-RTM/booboo_Solaris8
         BC_NT_MASTER=nss331/builds/20010928.2.331-RTM/blowfish_NT4.0_Win95
     else                      # NSS-3-2-2RTM
         BC_UX_MASTER=nss322/builds/20010820.1/y2sun2_Solaris8
         BC_NT_MASTER=nss322/builds/20010820.1/blowfish_NT4.0_Win95
     fi
     BC_MASTER=$BC_UX_MASTER
     BC_MASTER_WAS_SET=FALSE
 else
     BC_MASTER_WAS_SET=TRUE
 fi
 BC_RELEASE=3.2
 export BC_RELEASE
 EARLY_EXIT=TRUE     #before the report file has been created, causes Exit to
                     #create it
 UX_D0=/share/builds/mccrel3/nss
 ################################### glob_init ##########################
 # global shell function, main initialisation function
 ########################################################################
 glob_init()
 {
     if [ $O_PARAM = "ON" ] ; then
         eval_opts $*    # parse parameters and options - set flags
     fi
                         # if running from cron HOST needs to be known early,
     init_host            # so the output file name can be constructed.
     Debug "Setting up environment...( $QASCRIPT_DIR/set_environment) "
     . $QASCRIPT_DIR/set_environment #finds out if we are running on Windows
     Debug "OPerating system: $os_name $os_full"
     umask 0
     init_dirs
     init_files
     init_vars
 }
 ################################### init_vars ###########################
 # global shell function, sets the environment variables, part of init
 ########################################################################
 init_vars()
 {
     if [ -z "$LOGNAME" ]
     then
         if [ $O_WIN = "ON" ]
         then
             LOGNAME=$USERNAME
         else
             LOGNAME=$USER
         fi
         if [ -z "$LOGNAME" ]
         then
             LOGNAME=$UNAME
             if [ -z "$LOGNAME" ]
             then
                 LOGNAME=`basename $HOME`
             fi
         fi
     fi
     if [ -z "$LOGNAME" ]
     then
         Exit "Can't determine current user"
     fi
     case $HOST in
         iws-perf)
             O_HWACC=ON
             HWACC_LIST="rainbow ncipher"
             #MODUTIL="-add rainbow -libfile /usr/lib/libcryptoki22.so"
             export HWACC_LIST
             ;;
         *)
             O_HWACC=OFF
             ;;
     esac
    export O_HWACC
 }
 ########################################################################
 # functions below deal with setting up the directories and PATHs for
 # all different flavors of OS (Unix, Linux, NT MKS, NT Cygnus) and QA
 # (Standard, local tinderbox)
 ########################################################################
 ########################## find_nt_masterbuild #########################
 # global shell function, sets the nt masterbuild directories, part of init
 ########################################################################
 find_nt_masterbuild()
 {
     NT_MASTERDIR=${DAILY_BUILD}/${NT_MASTERBUILD}
     if [ "${NT_MB_WAS_SET}" = "FALSE" -a ! -d $NT_MASTERDIR ] ; then
         if [ -d ${DAILY_BUILD}/*NT4* ] ; then
             NT_MASTERBUILD=` cd ${DAILY_BUILD}; ls -d *NT4* `
             Debug "NT_MASTERBUILD $NT_MASTERBUILD"
             NT_MASTERDIR=${DAILY_BUILD}/${NT_MASTERBUILD}
         fi
     fi
     Debug "NT_MASTERDIR $NT_MASTERDIR"
 }
 ################################### set_daily_build_dirs ###########################
 # global shell function, sets directories
 ########################################################################
 set_daily_build_dirs()
 {
     if [ "$O_LOCAL" = "ON" -a "$O_LN" = "OFF" ] ; then
         DAILY_BUILD=${LOCAL_MOZROOT}        # on local builds NSS_VER_DIR and DAILY_BUILD are
                              # set to the LOCAL_MOZROOT, since it is not sure
                              # if ../.. (DAILY_BUILD) even exists
         LOCALDIST=${LOCAL_MOZROOT}/dist
     elif [ "$O_TBX" = "ON" ] ; then
         DAILY_BUILD="$TBX_DAILY_BUILD"
         LOCALDIST=${UXDIST}
     else
         DAILY_BUILD=${NSS_VER_DIR}/builds/${QAYEAR}${BUILDDATE}.${BUILDNUMBER}
         LOCALDIST=${DAILY_BUILD}/${MASTERBUILD}/mozilla/dist
     fi
 }
 map_os64()
 {
   IS_64=""
   case `uname -s` in
       #OSF1) has been done already - always 64 bit
       SunOS)
           MAPPED_OS=Solaris*8
           IS_64=`(isainfo -v | grep 64)>/dev/null 2>/dev/null && echo 64 bit`
           if [ "$O_TBX" = "OFF" ] ; then
               set_osdir
               if [ -n "$IS_64" ]
               then #Wait for the 64 bit build to finish...
                   Debug Testing build for $MAPPED_OS in $OSDIR
                   Wait ${OSDIR}/SVbuild.InProgress.1 0
               fi
           fi
           ;;
       AIX)
           IS_64=`lslpp -l | grep "bos.64bit"> /dev/null && echo 64 bit`
           ;;
       HP-UX)
           IS_64=`getconf KERNEL_BITS | grep 64 >/dev/null && echo 64 bit`
           ;;
   esac
   Debug "Mapped OS to $MAPPED_OS"
 }
 ################################### copy_to_local ########################
 # global shell function, copies the necessary directories from the
 # daily build aerea to the local disk
 ########################################################################
 copy_to_local()
 {
     Debug "Copy network directories to local directories"
     C2L_ERROR=0
     if [ ! -d ${LOCAL_MOZROOT}/dist ] ; then
         mkdir -p ${LOCAL_MOZROOT}/dist || C2L_ERROR=1
     fi
     if [ ! -d ${LOCAL_MOZROOT}/security/nss ] ; then
         mkdir -p ${LOCAL_MOZROOT}/security/nss || C2L_ERROR=2
     fi
     if [ $C2L_ERROR != 0 ] ; then
         Exit "copy_to_local: Can t make necesssary directories ($C2L_ERROR ) "
     fi
     if [ ! -d ${LOCAL_MOZROOT}/security/nss/tests ] ; then
         cp -r ${TESTSCRIPTDIR} ${LOCAL_MOZROOT}/security/nss || C2L_ERROR=1
     fi
     if [ ! -d ${LOCAL_MOZROOT}/security/coreconf ] ; then
         cp -r ${MOZILLA_ROOT}/security/coreconf ${LOCAL_MOZROOT}/security || C2L_ERROR=2
     fi
     NO_DIRS=0;
     if [ "$O_WIN" = "ON" ] ; then
         OS_TARGET=WINNT;export OS_TARGET
     fi
     unset BUILD_OPT;export BUILD_OPT;
     unset USE_64;export USE_64;
 #FIXME only tested on 64 bit Solaris and only got 32 bit builds
     while [ $NO_DIRS -lt 4 ] ; do
                                                   # first time thru: Debug 32 bit NT
         set_objdir
         Debug "Copying ${OBJDIR}..."
         if [ ! -d ${LOCAL_MOZROOT}/dist/${OBJDIR} ] ; then
             cp -r ${LOCALDIST}/${OBJDIR} ${LOCAL_MOZROOT}/dist || C2L_ERROR=3
         fi
         NO_DIRS=`expr $NO_DIRS + 1`
         if [ $NO_DIRS = 1 ] ; then                # 2nd time: OPT 32 bit NT
             BUILD_OPT=1; export BUILD_OPT;
         elif [ $NO_DIRS = 2 ] ; then              # 3rd time: OPT, either 64 bit or Win95 or force exit
             if [ "$O_WIN" = "ON" ] ; then
                 OS_TARGET=WIN95;export OS_TARGET
             else
                 map_os64
                 if [ -z "$IS_64" ] ; then #32 bit platform
                     NO_DIRS=4
                 else
                     USE_64=1; export USE_64
                 fi
             fi
         elif [ $NO_DIRS = 3 ] ; then              # 4th time:  Debug either 64 bit or Win95
             unset BUILD_OPT;export BUILD_OPT;
         fi
     done
     if [ $C2L_ERROR != 0 ] ; then
         Exit "copy_to_local: Can t copy necesssary directories ($C2L_ERROR ) "
     fi
     unset TESTSCRIPTDIR
     unset TESTDIR
     unset RESULTDIR
     O_LN=OFF       #from here on pretend it is regular -l local QA FIXME, might cause
                    #problems with the backwardcompatibility tests
     Debug "Successfully copied network directories to local directories"
 }
 ################################### local_dirs ###########################
 # global shell function, sets the directories for local QA
 ########################################################################
 local_dirs()
 {
     Debug "Set directories for local QA"
     #if [ "$O_WIN" = "ON" ] ; then
         #win_set_tmp
     #fi
     NSS_VER_DIR=${LOCAL_MOZROOT}        # on local builds NSS_VER_DIR and DAILY_BUILD are
                          # set to the LOCAL_MOZROOT, since it is not sure
                          # if ../../../.. (NSS_VER_DIR) even exists
     if [ -z "${RESULTDIR}" ] ; then # needs to be local as well
         Debug "Setting RESULTDIR for local QA"
         RESULTDIR="${LOCAL_MOZROOT}/tests_results/security/${HOST}-`date +%Y%m%d-%H.%M`"
     fi
     set_daily_build_dirs
     UX_MASTERDIR=`dirname ${LOCAL_MOZROOT}`
     NT_MASTERDIR=$UX_MASTERDIR
     MOZILLA_ROOT=${LOCAL_MOZROOT}
     UXDIST=${MOZILLA_ROOT}/dist
     NTDIST=${UXDIST}
     if [ -z "${TESTDIR}" ] ; then
         Debug "Setting TESTDIR for local QA"
         TESTDIR=${RESULTDIR}
     fi
     if [ -n "$TESTDIR" ] ; then
         if [ ! -d $TESTDIR ] ; then
             Debug "Making TESTDIR for local QA"
             mkdir -p $TESTDIR
         fi
     fi
     export TESTDIR
     Debug "RESULTDIR $RESULTDIR TESTDIR $TESTDIR"
     TESTSCRIPTDIR=${LOCAL_MOZROOT}/security/nss/tests
     COMMON=${TESTSCRIPTDIR}/common
     set_objdir
     debug_dirs
     export_dirs
 }
 ################################### tbx_dirs ###########################
 # global shell function, sets the directories for tinderbox QA
 ########################################################################
 tbx_dirs()
 {
     Debug "Set directories for tinderbox"
     if [ "$O_WIN" = "ON" ] ; then
         win_set_d1 # we need the NSS_VER_DIR later
     else
         NSS_VER_DIR="$UX_D0"/nss$NSSVER
     fi
     if [ -z "${RESULTDIR}" ] ; then # needs to be different for tinderbox
         Debug "Setting RESULTDIR for tinderbox"
         TBX_NOBITS=""
         echo $QASCRIPT_DIR | grep 64  >/dev/null && TBX_NOBITS=64
         TRD="${HOST}${TBX_NOBITS}-`date +%Y%m%d-%H.%M`"
         RESULTDIR="${NSS_VER_DIR}/tinderbox/tests_results/security/${TRD}"
         if [ ${DOMSUF} = "mcom.com" -o  ${DOMSUF} = "netscape.com" -o ${DOMSUF} = "nscp.aoltw.net" ] ; then
             URL="sbs-rel.nscp.aoltw.net"
         else
             URL="cindercone.red.iplanet.com"
         fi
         if [ "$O_WIN" = "ON" ] ; then
             RESULTDIRURL="<a title=\"QA Results\" href=\"http://${URL}${UX_D0}/nsstip/tinderbox/tests_results/security/${TRD}\">QA</a>"
         else
             RESULTDIRURL="<a title=\"QA Results\" href=\"http://${URL}${RESULTDIR}\">QA</a>"
         fi
         Debug "RESULTDIRURL TinderboxPrint:$RESULTDIRURL"
     fi
     TBX_DAILY_BUILD=`cd ../../../../..;pwd`
     NSS_VER_DIR="${TBX_DAILY_BUILD}/../.."
     TBX_LOGFILE_DIR=`ls ${NSS_VER_DIR}/logs/tinderbox | sed -e 's/ .*//g'`
     if [ -z "$TBX_LOGFILE_DIR" ] ; then
         TBX_LOGFILE_DIR=`ls ${NSS_VER_DIR}/logs/tbx | sed -e 's/ .*//g'`
         TBX_LOGFILE_DIR="${NSS_VER_DIR}/logs/tbx/${TBX_LOGFILE_DIR}"
     else
         TBX_LOGFILE_DIR="${NSS_VER_DIR}/logs/tinderbox/${TBX_LOGFILE_DIR}"
     fi
     Debug "Set TBX_LOGFILE_DIR ${TBX_LOGFILE_DIR}"
     set_daily_build_dirs
     UX_MASTERDIR=`cd ../../../..;pwd`
     NT_MASTERDIR=$UX_MASTERDIR
     MOZILLA_ROOT=$UX_MASTERDIR/mozilla
     UXDIST=${MOZILLA_ROOT}/dist
     NTDIST=${UXDIST}
     if [ -z "${TESTDIR}" ] ; then
         Debug "Setting TESTDIR for tinderbox"
         TESTDIR=${RESULTDIR}
     fi
     if [ -n "$TESTDIR" ] ; then
         if [ ! -d $TESTDIR ] ; then
             Debug "Making TESTDIR for tinderbox"
             mkdir -p $TESTDIR
         fi
     fi
     Debug "Making QAstatus file"
     echo "QA running" >${TESTDIR}/QAstatus
     export TESTDIR
     Debug "RESULTDIR $RESULTDIR TESTDIR $TESTDIR"
     TESTSCRIPTDIR=`pwd`
     COMMON=${TESTSCRIPTDIR}/common
     set_objdir
     debug_dirs
     export_dirs
 }
 ################################### init_mcom ###########################
 # global shell function, sets domain specific variables for AOL's
 # domains according to Bishakha's instructions
 ########################################################################
 init_mcom()
 {
     Debug "Running in mcom or netscape domain - changing directories..."
     if [ "${UX_MB_WAS_SET}" = "FALSE" ] ; then #in case it was set
         # before script was called use these values
         UX_MASTERBUILD=spd04_Solaris8
     fi
     if [ "${NT_MB_WAS_SET}" = "FALSE" ] ; then
         NT_MASTERBUILD=spd06_NT4
     fi
     MASTERBUILD=$UX_MASTERBUILD
     if [ "${BC_MASTER_WAS_SET}" = "FALSE" ] ; then
         BC_UX_MASTER=nss322/builds/20010820.1/y2sun2_Solaris8
         BC_NT_MASTER=nss322/builds/20010820.1/blowfish_NT4.0_Win95
         BC_MASTER=$BC_UX_MASTER
     fi
     UX_D0=/share/builds/sbsrel2/nss
     URL="sbs-rel.nscp.aoltw.net"
 }
 ################################### init_dirs ###########################
 # global shell function, sets the directories for standard QA
 # calls special functions for tinderbox, windows or local QA, part of init
 ########################################################################
 init_dirs()
 {
     if [ ${DOMSUF} = "mcom.com" -o  ${DOMSUF} = "netscape.com" -o ${DOMSUF} = "nscp.aoltw.net" ] ; then
         init_mcom
     fi
     if [ $O_WIN = "ON" ] ; then
         win_set_tmp
         write_to_tmpfile
         MASTERBUILD=$NT_MASTERBUILD
         BC_MASTER=$BC_NT_MASTER
     fi
     if [ "$O_LOCAL" = "ON" -a $O_LN = "OFF" ] ; then  # if it is a LN we need to know
                        # all the directories off the network first to copy them
         local_dirs     # O_LOCAL alone assumes that all the directories are already there
         return
     elif [ "$O_TBX" = "ON" ] ; then
         tbx_dirs
         return
     elif [ "$O_WIN" = "ON" ] ; then
         win_set_d1
     else
         NSS_VER_DIR="$UX_D0"/nss$NSSVER
     fi
     #set -x
     set_daily_build_dirs
     if [ -z "${BCDIST}" ] ; then
         #BCDIST=/share/builds/mccrel3/nss/${BC_MASTER}/mozilla/dist
         BCDIST=${NSS_VER_DIR}/../${BC_MASTER}/mozilla/dist
         if [ ! -d $BCDIST -a `basename $0` != jssqa ] ; then
             ask "Backward compatibility directory $BCDIST does not exist, continue" "y" "n" || Exit
         fi
     fi
     UX_MASTERDIR=${DAILY_BUILD}/${UX_MASTERBUILD}
     find_nt_masterbuild
     if [ "$O_WIN" = "ON" ]
     then
         MOZILLA_ROOT=${NT_MASTERDIR}/mozilla
     else
         MOZILLA_ROOT=${UX_MASTERDIR}/mozilla
     fi
     UXDIST=${UX_MASTERDIR}/mozilla/dist
     NTDIST=${NT_MASTERDIR}/mozilla/dist
     if [ -z "${RESULTDIR}" ] ; then
         RESULTDIR=${UX_MASTERDIR}/mozilla/tests_results/security
     fi
     if [ -n "$PRODUCT_TO_TEST" -a "$PRODUCT_TO_TEST" = "JSS" ] ; then
         if [ "$O_WIN" = "ON" ] ; then
             JSS_NSS_SRC_DIR=$JSS_NSS_NT_SRC_DIR
         fi
         TESTSCRIPTDIR=${NSS_VER_DIR}/../${JSS_NSS_SRC_DIR}/mozilla/security/nss/tests
     else
         TESTSCRIPTDIR=${MOZILLA_ROOT}/security/nss/tests
     fi
     if [ ! -d $TESTSCRIPTDIR -a `basename $0` != jssqa ] ; then
         if [ "$O_WIN" = "ON" -a "$WIN_WAIT_FOREVER" = "ON" ]
         then
             WaitForever $TESTSCRIPTDIR/all.sh 1
         else
             Exit "Test directory $TESTSCRIPTDIR does not exist"
         fi
     fi
     COMMON=${TESTSCRIPTDIR}/common
     if [ "$O_LOCAL" = "ON" -a $O_LN = "ON" ] ; then  # if it is a LN we need to know
                        # all the directories off the network first to copy them
         copy_to_local
         local_dirs
     fi
     #set +x
     set_objdir
     debug_dirs
     export_dirs
 }
 debug_dirs()
 {
     Debug "NTDIST $NTDIST"
     Debug "UXDIST $UXDIST"
     Debug "TESTSCRIPTDIR $TESTSCRIPTDIR"
     Debug "RESULTDIR $RESULTDIR"
     Debug "TMP $TMP"
     Debug "LOCALDIST_BIN $LOCALDIST_BIN"
     Debug "COMMON $COMMON"
     Debug "MOZILLA_ROOT $MOZILLA_ROOT"
     Debug "BCDIST $BCDIST"
 }
 export_dirs()
 {
     export NSS_VER_DIR DAILY_BUILD NTDIST UXDIST RESULTDIR TESTSCRIPTDIR BCDIST
     export UX_MASTERDIR NT_MASTERDIR COMMON MOZILLA_ROOT
 }
 set_osdir()
 {
     OSDIR=${DAILY_BUILD}/*${MAPPED_OS}*
 }
 ################################### init_files ###########################
 # global shell function, sets filenames, initializes files, part of init
 ########################################################################
 init_files()
 {
     if [ $O_CRONFILE = "ON" ]
     then
         Debug "attempting to create resultfiles"
         if [ "$O_TBX" = "ON" ] ; then
             NEWFILENAME=${TBX_LOGFILE_DIR}/qa.log
             if [ ! -w ${TBX_LOGFILE_DIR} ] ; then
                 Exit "can't touch $NEWFILENAME"
             fi
         else
             NEWFILENAME=$RESULTDIR/$HOST.`basename $0`
         fi
         if [ ! -d $RESULTDIR ]
         then
             mkdir -p $RESULTDIR || Exit "Error: can't make $RESULTDIR"
         fi
         if [ ! -w $RESULTDIR ] ; then
             Exit "can't touch $NEWFILENAME"
         fi
         Debug "About to touch $NEWFILENAME "
         touch $NEWFILENAME || Exit "Error: can't touch $NEWFILENAME"
         if [ "$O_TBX" = "ON" ] ; then
              echo "QA results in $RESULTDIR" >>$NEWFILENAME || Exit "Error: can't write to $NEWFILENAME"
         fi
         Debug "About to cat $FILENAME >>$NEWFILENAME "
         cat $FILENAME >>$NEWFILENAME || Exit "Error: can't append $FILENAME to $NEWFILENAME"
         TMPFILES="$TMPFILES $FILENAME"
         FILENAME=$NEWFILENAME
         Debug "Writing output to $FILENAME"
     fi
 }
 ################################### write_to_tmpfile ##########################
 # global shell function, for NT and cron operation, first a tmpfile
 # needs to be created
 ########################################################################
 write_to_tmpfile()
 {
     O_CRONFILE=ON
     O_FILE=ON
     FILENAME=${TMP}/nsstmp.$$    # for now write to the temporary file
                                  # since we don't know the hostname yet
                                  # will be inserted to the real file later
     TMPFILES="$TMPFILES nsstmp.$$"
     touch $FILENAME || Exit "Error: can't touch $FILENAME"
     Debug "Writing output to $FILENAME"
 }
 ############################# turn_on_cronoptions ######################
 # global shell function, turns on options needed for cron and tinderbox
 ########################################################################
 turn_on_cronoptions()
 {
     O_CRON=ON
     O_SILENT=ON
     O_DEBUG=ON                # FIXME take out!
     O_ALWAYS_YES=ON
     write_to_tmpfile
 }
 ########################## test_mozroot ##########################
 # global shell function, determines if the variable LOCAL_MOZROOT is set,
 # and is usable as mozilla root diretory for a local QA
 ###################################################################
 test_mozroot()
 {
   PWD=`pwd`
   Debug "LOCAL_MOZROOT = $LOCAL_MOZROOT"
   case "$LOCAL_MOZROOT" in
       [0-9-]*|tip)
           glob_usage "Error: -"$1" requires a directoryname to follow (start with a letter) "
           ;;
       \.\.)
           LOCAL_MOZROOT=`dirname $PWD`
           ;;
       \.)
           LOCAL_MOZROOT=$PWD
           ;;
       \.\/*)
           LOCAL_MOZROOT=`echo $LOCAL_MOZROOT | sed -e "s/^\.//"`
           LOCAL_MOZROOT="${PWD}${LOCAL_MOZROOT}"
           ;;
       \.\.\/*)
           LOCAL_MOZROOT="${PWD}/${LOCAL_MOZROOT}"
           ;;
       \/*|[a-zA-Z]:\/*)
           ;;
       ?*)
           LOCAL_MOZROOT="${PWD}/${LOCAL_MOZROOT}"
           ;;
       *)
           glob_usage "Error: -"$1" requires a directoryname to follow"
           ;;
   esac
   Debug "Reformated MOZROOT to $LOCAL_MOZROOT"
   if [ "$1" = "ln" ] ; then
       LOCAL_MOZROOT_PARENT=`dirname $LOCAL_MOZROOT`
       if [ ! -d $LOCAL_MOZROOT_PARENT -o ! -w $LOCAL_MOZROOT_PARENT -o \
            ! -x $LOCAL_MOZROOT_PARENT ] ; then
               Exit "Error: Can't create $LOCAL_MOZROOT (permissions)"
       fi
       if [ ! -d "$LOCAL_MOZROOT" ] ; then
           mkdir $LOCAL_MOZROOT ||
               Exit "Error: Can't create mozroot $LOCAL_MOZROOT (mkdir failed)"
       else
           ask "mozroot $LOCAL_MOZROOT exists - continue (y will remove dir) ?" \
                "y" "n" || Exit
           rm -rf $LOCAL_MOZROOT/dist $LOCAL_MOZROOT/security $LOCAL_MOZROOT/tests_results ||
               Exit "Error: Can't clean mozroot $LOCAL_MOZROOT"
       fi
   fi
   if [ ! -d "$LOCAL_MOZROOT" ] ; then
       glob_usage "Error: mozilla root $LOCAL_MOZROOT not a valid directory"
   fi
 }
 ################################### eval_opts ##########################
 # global shell function, evapuates options and parameters, sets flags
 # variables and defaults
 ########################################################################
 eval_opts()
 {
   while [ -n "$1" ]
   do
     case $1 in
         -cron)
             turn_on_cronoptions
             ;;
         -T*|-t*)
             O_TBX=ON
             turn_on_cronoptions
             O_SILENT=OFF	#FIXME debug only
             ;;
         -S*|-s*)
             O_SILENT=ON
             ;;
         -Y*|-y)
             Debug "Option -y dedectet"
             O_ALWAYS_YES=ON
             ;;
         -d*|-D)
             O_DEBUG=ON
             #set -x
             ;;
         -ml|-ML)
             O_MAIL_LINK=ON
             shift
             MAILINGLIST=$1
             if [ -z "$MAILINGLIST" ]
             then
                 glob_usage "Error: -m requires a mailinglist to follow, for example sonmi,wtc,nelsonb "
             fi
             Debug "Sending link to result to $MAILINGLIST"
             ;;
         -m|-M)
             O_MAIL=ON
             shift
             MAILINGLIST=$1
             if [ -z "$MAILINGLIST" ]
             then
                 glob_usage "Error: -m requires a mailinglist to follow, for example sonmi,wtc,nelsonb "
             fi
             Debug "Sending result to $MAILINGLIST"
             ;;
         -fcron*|-F[Cc][Rr][Oo][Nn]*)
             write_to_tmpfile
             ;;
         -f|-F)
             O_FILE=ON
             shift
             FILENAME=$1
             if [ -z "$FILENAME" ]
             then
                 glob_usage "Error: -f requires a filename to follow"
             fi
             #rm -f $FILENAME 2>/dev/null
             touch $FILENAME || Exit "Error: can't touch $FILENAME"
                                     #NOTE we append rather that creating
             Debug "Writing output to $FILENAME"
             ;;
         -h|-help|"-?")
             glob_usage
             ;;
         -ln)
             if [ `basename $0` != nssqa ] ; then
                 glob_usage "Error: Can't handle option $1"
             fi
             O_LOCAL=ON
             O_LN=ON
             shift
             LOCAL_MOZROOT=$1
             test_mozroot ln
             ;;
         -lt)
             if [ `basename $0` != nssqa ] ; then
                 glob_usage "Error: Can't handle option $1"
             fi
             O_LN=ON
             O_LOCAL=ON
             ;;
         -l)
             if [ `basename $0` != nssqa ] ; then
                 glob_usage "Error: Can't handle option $1"
             fi
             O_LOCAL=ON
             shift
             LOCAL_MOZROOT=$1
             test_mozroot l
             ;;
         -p)
             shift
             PORT=$1
             export PORT
             ;;
         -*)
             glob_usage "Error: Can't handle option $1"
             ;;
         tip|3.|3..)
             NSSVER=$1
             if [ -z "$NSSVER" ] ; then
                 glob_usage "Error: illegal parameter"
             fi
             ;;
         [01][0-9][0123][0-9])
             BUILDDATE=$1
             if [ -z "$BUILDDATE" ] ; then
                 glob_usage "Error: illegal parameter"
             fi
             ;;
         ?*)
             glob_usage "Error: Can't handle parameter $1"
             ;;
     esac
     shift
   done
   if [ -z "$PORT" -a "$O_TBX" = "ON" ] ; then
       PORT=8444
       export PORT
       if [ -z "$NSSVER" ] ; then
           NSSVER="tip"
           Debug "NSS Version: Parameters missing - defaulting to tip!"
       fi
   elif [ -z "$NSSVER" ] ; then
       NSSVER="tip"
       Debug "NSS Version: Parameters missing - defaulting to tip!"
   fi
   if [ -z "$BUILDDATE" ] ; then
       BUILDDATE=`date +%m%d`
       Debug "Builddate: Parameters missing - defaulting to today!"
   fi
   Debug "Builddate $BUILDDATE NssVersion $NSSVER"
   export BUILDDATE NSSVER
   export O_CRON O_SILENT O_DEBUG O_ALWAYS_YES O_TBX
 }
 win_set_tmp()
 {
     TMP=`echo "$TMP" | sed -e 's/	/\/t/g' -e 's//\/b/' -e 's/\\\/\//g'`
     Debug "TMP reformated to $TMP"
 }
 ######################### win_set_d1 ################################
 # global shell function, interactively finds the directories in case
 # windows can't get to the default
 ########################################################################
 win_set_d1()
 {
     Debug "set Windows Directories..."
     #win_set_tmp
     if [ "$O_CYGNUS" = ON ]
     then
         NSS_VER_DIR=/cygdrive/w/nss/nss$NSSVER
     else
         NSS_VER_DIR=w:/nss/nss$NSSVER
     fi
     if [ ! -w $NSS_VER_DIR ]
     then
         Echo "Windows special... can't write in $NSS_VER_DIR"
         if [ "$O_CYGNUS" = ON ]
         then
             NSS_VER_DIR=/cygdrive/u/nss/nss$NSSVER
         else
             NSS_VER_DIR="u:/nss/nss$NSSVER"
         fi
     else
         Debug "NSS_VER_DIR set to $NSS_VER_DIR"
         return
     fi
     while [ ! -w $NSS_VER_DIR ]
     do
         if [ "$O_CRONFILE" = "ON" ]
         then
             Exit "cant write in $NSS_VER_DIR"
         fi
         Warning "cant write in $NSS_VER_DIR"
         Echo "input start directory (u:/nss, d:/src/nss, f:/shared/nss) "
         read D
         if [ -n "$D" ]
         then
             NSS_VER_DIR=$D/nss$NSSVER
         fi
     done
     Debug "NSS_VER_DIR set to $NSS_VER_DIR"
 }
 ########################### init_host ##################################
 # global shell function, sets required variables HOST and DOMSUF, and asks
 # the user if it has been set right
 ########################################################################
 set_host()
 {
     init_host
 }
 init_host()
 {
     if [ `basename $0` != nssqa ] ; then
         return
     fi
     init_host_done=0
     if [ $DS_WAS_SET = FALSE ] #give chance to overwrite, espec. for NT
     then
         Debug "Domainname was not set..."
         DOMSUF=`domainname 2>/dev/null`
         if [ -z "$DOMSUF" ]
         then
             Debug "domainname command did not work ..."
             DOMSUF=`echo $HOST | grep '\.' | sed -e "s/[^\.]*\.//"`
             if [ -z "$DOMSUF" ]
             then
                 Debug "Domainname not part of the hostname"
                 DOMSUF=`cat /etc/defaultdomain 2>/dev/null`
                 if [ -z "$DOMSUF" ]
                 then
                     Debug "Domainname needs to be hardcoded to red.iplanet.com"
                     DOMSUF="red.iplanet.com"
                 fi
             fi
         fi
     fi
     case $HOST in
         *\.*)
             Debug "HOSTNAME $HOST contains Dot"
             HOST=`echo $HOST | sed -e "s/\..*//"`
             ;;
     esac
     if [ -z "$HOST" ]
     then
         HOST=`uname -n`
         case $HOST in
             *\.*)
                 Debug "HOSTNAME $HOST contains Dot"
                 HOST=`echo $HOST | sed -e "s/\..*//"`
                 ;;
         esac
     fi
     if [ $O_DEBUG = "ON" ]
     then
         while [ $init_host_done -eq 0 ]
         do
             Echo
             ask "DOMSUF=$DOMSUF, HOST=$HOST - OK", "y" "n" &&
                 init_host_done=1
             if [ $init_host_done -eq 0 ]
             then
                 Echo "input DOMSUF: "
                 read D
                 if [ -n "$D" ]
                 then
                     DOMSUF=$D
                 fi
                 Echo "input HOST: "
                 read H
                 if [ -n "$H" ]
                 then
                     HOST=$H
                 fi
             fi
         done
     fi
     export HOST DOMSUF
     Debug "HOST: $HOST, DOMSUF: $DOMSUF"
 }
 #-----------------------------# UTILS #----------------------------------
 ########################### qa_stat_get_sysinfo ########################
 # local shell function, tries to determine the QA operating system
 ########################################################################
 qa_stat_get_sysinfo()
 {
     case $1 in
         ?*) REM_SYS=$1
             GET_SYSINFO="rsh $1"
             ;;
         *)  REM_SYS=""
             GET_SYSINFO=""
             ;;
     esac
     QA_SYS=`$GET_SYSINFO uname -sr`
     echo $QA_SYS | grep Linux >/dev/null &&
               QA_RHVER=`$GET_SYSINFO cat /etc/redhat-release`
     if [ -n "$QA_RHVER" ]
     then
         QA_OS=`echo $REM_SYS $QA_RHVER | sed -e "s/Red Hat /RH /" \
                     -e "s/ release//"`
     else
         case $QA_SYS in
             *SunOS*5.[89]*)
                 ISAINFO=`$GET_SYSINFO isainfo -v`
                 IS_64=`echo $ISAINFO | grep 64 >/dev/null && \
                     echo 64 bit`
                 IS_I386=`echo $ISAINFO | grep i386 >/dev/null && \
                     echo i86pc`
                 if [ -n "$IS_I386" ] ; then IS_64="$IS_I386"; fi;
                 if [ -z "$IS_64" ] ; then IS_64="32 bit"; fi;
                 ;;
             *HP*)
                 IS_64=`$GET_SYSINFO getconf KERNEL_BITS |
                     grep 64 >/dev/null && echo 64 bit`
                 if [ -z "$IS_64" ] ; then IS_64="32 bit"; fi;
                 ;;
             *AIX*)
                 IS_64=`$GET_SYSINFO lslpp -l |
                     grep "bos.64bit"> /dev/null && echo 64 bit`
                 if [ -z "$IS_64" ] ; then IS_64="32 bit"; fi;
                 ;;
         esac
         QA_OS=`echo "$REM_SYS $QA_SYS $IS_64"`
     fi
     if [ "$O_SILENT" != ON ] ; then
         echo $QA_OS
     fi
     QA_OS_STRING=`echo $QA_OS | sed -e "s/^[_ ]//" -e "s/ /_/g"`
 }
 ################################### set_objdir #########################
 # global shell function, sets the object directories and DIST
 ########################################################################
 set_objdir()
 {
     Debug "set object dir"
     OBJDIR=`cd ${TESTSCRIPTDIR}/common; gmake objdir_name`
     OS_ARCH=`cd ${TESTSCRIPTDIR}/common; gmake os_arch`
     #at this point $MASTERBUILD needs to be either NT or unix
     set_daily_build_dirs
     LOCALDIST_BIN=${LOCALDIST}/${OBJDIR}/bin
     DIST=$LOCALDIST
     if [ -z "${TEST_LEVEL}" ] ; then
         TEST_LEVEL=0
     fi
     bc ${TEST_LEVEL}   #set the path for the backward compatibility test
     PATH_CONTAINS_BIN="TRUE"
     export PATH_CONTAINS_BIN
     export OBJDIR OS_ARCH LOCALDIST LOCALDIST_BIN DIST PATH
 }
 ########################### bc #########################################
 # global shell function , sets paths for the backward compatibility test
 ########################################################################
 bc()
 {
   if [ -n "$PRODUCT_TO_TEST" -a "$PRODUCT_TO_TEST" = "JSS" ] ; then
       TESTDIR=${RESULTDIR}
       BC_ACTION=""
       DON_T_SET_PATHS="FALSE" #let init.sh override - FIXME - check if necessary
       return
   fi
   DON_T_SET_PATHS="TRUE"
   case $1 in
 )
       #unset TESTDIR
       TESTDIR=${RESULTDIR}
       if [ "$O_WIN" = "ON" -a "$O_CYGNUS" != ON ] ; then
           PATH="$TESTSCRIPTDIR;$LOCALDIST_BIN;$BASEPATH"
       else
           PATH=$TESTSCRIPTDIR:$LOCALDIST_BIN:$BASEPATH
       fi
       BC_ACTION=""
       DON_T_SET_PATHS="FALSE" #let init.sh override - FIXME - check if necessary
       ;;
     *)
       if [ "$O_LOCAL" = "ON" ] ; then
           Exit "FIXME Can't run backwardcompatibility tests locally yet"
       fi
       TESTSCRIPTDIR=${BCDIST}/../security/nss/tests
       COMMON=${TESTSCRIPTDIR}/common
       TESTDIR=${RESULTDIR}/bct
       BC_ACTION="backward compatibility of binaries in $BC_MASTER to new libs"
       BCDIST_BIN=${BCDIST}/${OBJDIR}/bin
       LD_LIBRARY_PATH=${LOCALDIST}/${OBJDIR}/lib
       if [ "$O_WIN" = "ON" ] ; then
           if [ "$O_CYGNUS" = ON ] ; then
               PATH=$TESTSCRIPTDIR:$BCDIST_BIN:$BASEPATH:$LD_LIBRARY_PATH
           else
               PATH="$TESTSCRIPTDIR;$BCDIST_BIN;$BASEPATH;$LD_LIBRARY_PATH"
           fi
       else
           PATH=$TESTSCRIPTDIR:$BCDIST_BIN:$BASEPATH
       fi
       Debug "1st stage of backward compatibility test"
       ;;
   esac
   if [ -n "$TESTDIR" ] ; then
       if [ ! -d $TESTDIR ] ; then
           mkdir -p $TESTDIR
       fi
       export TESTDIR
   fi
   SHLIB_PATH=${LD_LIBRARY_PATH}
   LIBPATH=${LD_LIBRARY_PATH}
   Debug "PATH $PATH"
   Debug "LD_LIBRARY_PATH $LD_LIBRARY_PATH"
   export PATH LD_LIBRARY_PATH SHLIB_PATH LIBPATH
   export DON_T_SET_PATHS BC_ACTION
   export TESTSCRIPTDIR COMMON
 }
 ########################### Ps #########################################
 # global shell function , attempts a platform specific ps
 ########################################################################
 Ps()
 {
 #AIX, OSF ps -ef, solaris /usr/5bin/ps -ef, win ps -ef but no user id
 #linux ps -ef, HP
     if [ $os_name = "SunOS" ]
     then
         /usr/5bin/ps -ef
     else
         ps -ef
     fi
 }
 ########################### kill_by_name ################################
 # global shell function , kills the process whose name is given as
 # parameter
 ########################################################################
 kill_by_name()
 {
     for PID in `Ps | grep "$1" | grep -v grep | \
         sed -e "s/^ *//g" -e "s/^[^ ]* //" -e "s/^ *//g" -e "s/ .*//g"`
     do
         if [ $O_WIN = "ON" -a $O_CYGNUS = "ON" ]
         then
             ask "Do you want to kill Process $PID (`Ps | grep $PID | \
                 grep -v grep | awk '{ print $1, $2, $6, $7, $8, $9 }' | \
                 sed -e "s/[0-9]:[0-6][0-9]//g" | grep $PID `)" \
                 "y" "n" && {
                 kill $PID
                 sleep 1
                 kill -9 $PID 2>/dev/null
             }
         else
             ask "Do you want to kill Process $PID (`Ps | grep $PID | \
                 grep -v grep | awk '{ print $1, $2, $8, $9, $10, $11 }' | \
                 sed -e "s/[0-9]:[0-6][0-9]//g" | grep $PID `)" \
                 "y" "n" && {
                 kill $PID
                 sleep 1
                 kill -9 $PID 2>/dev/null
             }
         fi
     done
 }
 ############################### early_exit ###################################
 # global shell function , attempts a little more usefull user notification
 # of a complete failure
 ########################################################################
 early_exit()
 {
     if [ -z "$DOCDIR" ]
     then
         DOCDIR=`dirname $0`/../doc
     fi
     if [ -f $DOCDIR/QAerror.html ]
     then
         Debug "Found QA errorheader"
         rm ${FILENAME}.err 2>/dev/null
         cp $DOCDIR/QAerror.html ${FILENAME}.err
         echo "$1" >>${FILENAME}.err
         echo '</font></b></h1>' >>${FILENAME}.err
         if [ -n "$FILENAME" -a -f "$FILENAME" ]
         then
             cat $FILENAME | sed -e "s/^/<br>/" >>${FILENAME}.err
         fi
         echo '</body></html>' >>${FILENAME}.err
         cat ${FILENAME}.err | $RMAIL $MAILINGLIST
         rm ${FILENAME}.err 2>/dev/null
         #echo "cat ${FILENAME}.err | $RMAIL $MAILINGLIST "
     fi
 }
 ############################### Exit ###################################
 # global shell function , central exiting point
 # cleanup: temporary files, kill the remaining selfservers if sourcing
 # script sets KILL_SELFSERV
 ########################################################################
 Exit()
 {
     Echo $1
     if [ "$O_CRON" = "OFF" ]
     then
         echo $1 >&2
     fi
     if [ -f "${KILLPIDS}" ]
     then
         Debug "Attempting to kill background processes...`cat ${KILLPIDS}`"
         kill `cat "${KILLPIDS}"`
         sleep 1
         kill -9  `cat "${KILLPIDS}"`
     fi
     if [ -n "${TMPFILES}" ]
     then
         Debug "rm -f ${TMPFILES}"
         rm -f $TMPFILES 2>/dev/null
     fi
     O_ALWAYS_YES=ON # set to non-interactive - don't ask anymore questions here
     if [ $KILL_SELFSERV = "ON" ]
     then
         kill_by_name selfserv
     fi
     if [ $O_MAIL_LINK = "ON" -a $O_FILE = "ON" ]
     then
         if [ $EARLY_EXIT = TRUE ]    #before the report file has been created
         then
             early_exit "$1"
         else
             head -3  $FILENAME >$ML_FILE
             echo "Content-Type: text/plain; charset=us-ascii; format=flowed
     Content-Transfer-Encoding: 7bit
 " >>$ML_FILE
             echo $HREF_TMP_HTML_FILE >>$ML_FILE
             cat $ML_FILE | $RMAIL $MAILINGLIST
         fi
 #FIXME - early exit etc
     elif [ $O_MAIL = "ON" -a $O_FILE = "ON" ]
     then
         if [ $EARLY_EXIT = TRUE ]    #before the report file has been created
         then
             early_exit "$1"
         elif [ -n "$FILENAME" -a -f "$FILENAME" ]
         then
             cat $FILENAME | $RMAIL $MAILINGLIST
         fi
         #rm $FILENAME 2>/dev/null
     elif  [ $O_MAIL = "ON" -a $EARLY_EXIT = TRUE ]
     then
         early_exit "$1"
         rm $FILENAME 2>/dev/null
     fi
     #chmod a+rw ${RESULTDIR} ${RESULTDIR}/* ${RESULTDIR}/*/* &
     if [ -n "$O_TBX" -a "$O_TBX" = "ON" ] ; then
         rm ${TESTDIR}/QAstatus
         if [ "$1" = "killed... cleaning up..." ] ; then
             echo "QA killed" >${TESTDIR}/QAstatus
         elif [ "$TBX_EXIT" = 0 ] ; then
             echo "QA passed" >${TESTDIR}/QAstatus
         else
             echo "QA failed" >${TESTDIR}/QAstatus
         fi
         exit $TBX_EXIT
     else
         exit
     fi
 }
 trap "rm -f ${TMPFILES} 2>/dev/null; Exit 'killed... cleaning up...'" 2 3 15
 ################################ Wait ##################################
 # global shell function to wait for an event to happen, 1st parameter
 # filename to watch, 2nd parameter 0 - wait for it to disappear, 1 wait
 # for it to be created.
 # uses the variables WAIT_FOR and WAIT_TIMES
 # WAIT_FOR: if waiting for an event sleep n seconds before rechecking
 #     recomended value 10 minutes 600
 # WAIT_TIMES: recheck n times before giving up to prevent endless loop
 #     recomended 30 - total of 5h
 ########################################################################
 Wait()
 {
     i=0
     Debug "Waiting for $1"
     while [ $i -lt $WAIT_TIMES ]
     do
         i=`expr $i + 1`
         if [ -f "$1" -a $2 -eq 1 ]   # if file exists and is supposed to
         then
             return
         fi
         if [ ! -f "$1" -a $2 -eq 0 ] # not exists and not supposed to exist
         then
             return
         fi
         Debug "Waiting for $1, loop #$i, about to sleep $WAIT_FOR seconds zzzz..."
         sleep $WAIT_FOR
     done
     TOTAL=`expr $WAIT_TIMES \* $WAIT_FOR / 60`
     Exit "I HAVE WAITED LONG ENOUGH FOR $1 NOW, I'M GONE! (THAT WAS A TOTAL OF $TOTAL MINUTES) I have better things to do... "
 }
 ################################ WaitForever ##################################
 # global shell function to wait for an event to happen, 1st parameter
 # filename to watch, 2nd parameter 0 - wait for it to disappear, 1 wait
 # for it to be created.
 # because we daon't have any relyable cron on NT...
 ########################################################################
 WaitForever()
 {
     i=0
     Debug "Waiting for $1"
     TOTAL=0
     while [ 1 ]
     do
         i=`expr $i + 1`
         if [ -f "$1" -a $2 -eq 1 ] # if file exists and is supposed to
         then
             return
         fi
         if [ ! -f "$1" -a $2 -eq 0 ] # not exists and not supposed to exist
         then
             return
         fi
         Debug "Waiting for $1, loop #$i, about to sleep $WAIT_FOR seconds Total $TOTAL"
         sleep $WAIT_FOR
         TOTAL=`expr $i \* $WAIT_FOR / 60`
         if [ -n "$MAX_FOREVER" ] # we are cheating. Forever can be very short...
         then
             if [ "$TOTAL" -gt "$MAX_FOREVER" ]
             then
                 Exit "I HAVE WAITED LONG ENOUGH FOR $1 NOW, I'M GONE! (THAT WAS A TOTAL OF $TOTAL MINUTES) I have better things to do... "
             fi
         fi
     done
 }
 ################################### is_running #########################
 # global shell function , implements primitive locking mechanism
 # filename is passed as a parameter, if filename.* exists we assume calling
 # script is running already and exit, otherwise filename.processid is
 # created
 ########################################################################
 is_running()
 {
     Debug "Testing if $0 is already running... file ${1} - ${1}.$$"
     if [ -f ${1}.* ]
     then
         Exit "$0 seems to be running already ($1 exists) - Exiting"
     fi
     TMPFILES="$TMPFILES ${1}.$$"
     echo "running $0 on `date` PID $$" >${1}.$$
     Debug "wrote \"running $0 on `date` PID $$\" to ${1}.$$"
 }
 #---------------------------# USERCOM #---------------------------------
 ############################## Echo #####################################
 # global shell function , depending on the options the output gets written
 # to a file, or is being discarded
 # FIXME  \n and \c are mistreates by differnet shells, and linux has /bin/echo
 # instead of /usr/bin/echo
 ########################################################################
 Echo ()
 {
     if [ $O_SILENT = OFF ]
     then
         echo "$*"
         #/usr/bin/echo "$*"
     fi
     if [ $O_FILE = ON ]
     then
         echo "$*" >>$FILENAME
     fi
 }
 ################################### ask ################################
 # global shell function, Asks the a question, and gives the returns 0
 # on the 1st choice, 1 on the 2nd choice
 #
 # PARAMETERS:
 #    $1 question text
 #    $2 1st choice
 #    $3 2nd choice
 #
 # MODIFIERS:
 #    -y O_ALWAYS_YES will assume a first choice always (not neccessaryly "y")
 #
 # RETURN:
 #    0 - User picked 1st choice
 #    1 - User picked 2nd choice
 #
 # EXAMPLE
 #    ask "Would you like to continue" "y" "n" || Exit
 #        will produce the string "Would you like to continue (y/n) ?",
 #        read input from keyboard (or assume a yes with option -y)
 #        - on a yes it will return 0, on a no it will return 1, the
 #        shell interprets it as error and the || Exit will be executed
 #
 # NOTE: NEVER use "n" as the second parameter - it will mess up -y
 #    don't ask "Continue" "n" "y" || Exit # it will Exit on a "y"
 #
 ########################################################################
 Ask()
 {
     ask $*
 }
 ask()
 {
     if [ $O_ALWAYS_YES = ON ]
     then
         Echo "$1 ($2/$3) ?"
         Echo "YES!"
         return 0
     fi
     A=""
     while [ 1 ]
     do
         Echo "$1 ($2/$3) ?"
         read A
         if [ -n "$A" ]
         then
             if [ $A = $2 ]
             then
                 return 0
             elif [ $A = $3 ]
             then
                 return 1
             fi
         fi
     done
     return 0
 }
 ################################### Warning ############################
 # global shell function, Asks the user a "... continue? (y/n)" question,
 # and exits when the user answers with no
 # NOTE -y will answer the warnings always with yes
 ########################################################################
 Warning ()
 {
     ask "WARNING: $0: \n $* continue " "y" "n" || Exit
 }
 ################################### Debug ############################
 # global shell function, when option -d Debugging output is written
 ########################################################################
 Debug()
 {
     if [ $O_DEBUG = ON ]
     then
         Echo "DEBUG: (`date +%H:%M`) $0: $*"
     fi
 }
 ################################### line ###############################
 # global shell function, supposed to make output more readable...
 ########################################################################
 line()
 {
 Echo
 #Echo "======================================================================="
 #Echo
 }
 ################################### opt_usage ##########################
 # global shell function, tells user about available options
 ########################################################################
 opt_usage()
 {
   if [ $O_OPTIONS = "ON" ]
   then
     Echo
     line
     Echo
     Echo "    -y answer all questions with y - use at your own risk..."
     Echo "    -s silent (only usefull with -y)"
     Echo "    -h, -? - you guessed right - displays this text"
     Echo "    -d debug"
     Echo "    -f <filename> - write the (error)output to filename"
     Echo "    -fcronfile produces the resultfiles in the same locations"
     Echo "        as would have been produced with -cron"
     Echo "    -m <mailinglist> - send filename to mailinglist (csl "
     Echo "         example sonmi,nelsonb,wtc) only useful with -f"
     Echo "    -ml <mailinglist> - send link to filename to mailinglist "
     Echo "         (csl example sonmi,nelsonb,wtc) only useful with -f"
     Echo "    -cron equivalient to -y -s -d -f \$RESULTDIR/\$HOST.nssqa"
     Echo "    -t run on a tinderbox build (included -cron)"
     if [ `basename $0` = nssqa ] ; then
         Echo "    -l <mozroot> run on a local build"
         Echo "    -ln <mozroot> copy a networkbuild to a local directory "
         Echo "        mozroot,  used for networkindipendend QA "
         Echo "    -lt try to copy a networkbuild to a local directory, if"
         Echo "        not possible run on the network
         Echo "        used for networkindipendend QA
     fi
 #
 # special strings
   fi
 }
 ################################### glob_usage #########################
 # global shell function, how to use the calling script (parameters, options)
 ########################################################################
 glob_usage()
 {
     line
     Echo $1
     Echo
     if [ $O_OPTIONS = "ON" ]
     then
         Echo "usage $0 [options] nssversion builddate"
     else
         Echo "usage $0 nssversion builddate"
     fi
     Echo " for example: $0 30b 0926"
     Echo "     $0 31 1002"
     opt_usage
     Echo
     Exit "$1"
 }
 tell()
 {
     if [ $O_SILENT = OFF ]
     then
         line
         pwd
         ls -CF
         line
     fi
     if [ $O_FILE = ON ]
     then
         line
         pwd >>$FILENAME
         ls -CF >>$FILENAME
         line
     fi
 }
 if [ $O_INIT = "ON" ]
 then
     glob_init $*
 fi
 EARLY_EXIT=FALSE

The Tor Browser / annotate

security/nss/tests/header@6474c204b198 (annotated)

security/nss/tests/header